Search Results

Search found 27496 results on 1100 pages for 'distributed source ctrl'.

Page 273/1100 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• "Make" system for Actionscript?

  - by Ender

  In working on larger Actionscript/Flash projects, I've started to really feel the need for some kind of "make" system, but I haven't found it yet. Does anyone know if it exists? Required features: Ability to associate SWCs with their source code and/or FLAs i.e. "this swc is compiled from this source" Ability to mark my current project as depending on these SWCs (either as compile-time or runtime libraries) A single, big shiny button, that when pressed does the following: Checks to see if any of the source files have changed, and if so, recompiles their associated SWCs Recompiles and relinks the main .swf, if necessary Runs the main .swf Have yet to find a way to get something like FlashDevelop to do this (but I don't know it well enough to be sure). Support for both code and FLA sources is preferred.

  Read the article

• GDI+ DrawImage function

  - by ET

  There is something I am missing. Say I have the following code: private Bitmap source = new Bitmap (some_stream); Bitmap bmp = new Bitmap(100,100); Rectangle newRect = new Rectangle(0, 0, bmp.Width, bmp.Height); Rectangle toZoom= new Rectangle(0, 0, 10, 10); Graphics g = Graphics.FromImage(bmp); g.DrawImage(source, newRect, toZoom, GraphicsUnit.Pixel); My goal is to zoom-in the 10x10 pixels on the top left corner of the source picture. After I created the graphics object g and called DrawImage: the requested rectangle (toZoom) will be copied to bmp, or will it be displayed on the screen? I am a bit confused, can somebody please clarify?

  Read the article

• Jquery - how i can get the video src value?

  - by 3gwebtrain

  i need to get the value of a video and need to change in to new value... for that i used this function: var video = $('#task2ResultVideo').get(0); console.log($(video).attr('poster')); // i am getting this $(video).attr('src',function(num,val){ console.log(num,val) // i am not getting this.. }) ? HTML: <video id="task2ResultVideo" autobuffer poster="img/task2-results-host-poster.jpg"> <source src="Video/webm/Task_2.4a_Host_treated.webm" type="video/webm" /> <source src="Video/ogv/Task_2.4a_Host_treated.theora.ogv" type="video/ogg" /> <source src="Video/MP4/Task_2.4a_Host_treated.mp4" type="video/mp4" /> </video>? But i am not able to get the values. what is wrong with my code? in case if i get the value how can i change the src? any suggestion please?

  Read the article

• Install Memcached With repcached "Built-In Server Side Replication" On Debian

  <b>Howtoforge:</b> "People probably know about memcached (http://memcached.org/) and its high performance name-value based memory object cache interface. Its main purpose is to provide an easy to use distributed caching engine in a multinode environment."

  Read the article

• Ubuntu 13.04 Raring Ringtail not booting

  - by Kristjan

  Hello my problem is getting annoying. Its my hard drive whats being funny i guess but here's the problem , before updating ubuntu everything was fine , and now im stuck on loading screen with white and orange dots , when i press S the system crashes and gives black screen and ctrl+alt+f1 doesnt show anything , system works fine on liveCD but i want it working on harddrive , any suggestions what to do , if i can access harddrive but not system itself? how i could fix it? i hope someone can help me out real soon.

  Read the article

• (L)GPL license questions

  - by Marco

  I'm uncertain about a few licensing questions. I develop a closed source application, that's communicating with an open source server. Are my assumptions correct? Can I use an unmodified (L)GPL software on the server-side? I think yes Can I use and modify (L)GPL software on the server-side? I think yes because I'm not distributing the server application The client uses an communication library licensed under LGPL. Can I make changes to this library? Yes, as long as I provide the source of the library with the client software Can I take only certain parts of an LGPL licensed software and make a new project? Yes if it's licensed under LGPL too.

  Read the article

• Data manipulation without server side

  - by monczek

  Hi, I have to create a very simple webpage to show, filter and add data from not-yet-defined source (probably txt/xml/cvs). Records should be visible as a table, filtered using 3 criteria fields. There should be also possibility to add new records. My first thought was: XHTML + jQuery + csv2table + PicNet Table Filter. It does exactly what I want except adding rows - that is saving changes in source file (probably due to security risk). My question is - is there any possibility to do it without involving server side like asp.net, jee, php, sql? Source file is located on the server. Thanks for your ideas :-)

  Read the article

• Multible jquery .load() methods not running concurrently in MVC 2

  - by Boob

  In one of my aspx pages i have something like this in the head: <script type="text/javascript"> $(function() { // Jquery stuff loadStuff(); }); function loadStuff() { $('#result1').load({ source: url }); $('#result2').load({ source: url }); $('#result3').load({ source: url }); }; </script> The idea being that as the page is being displayed these loads will populate the specified divs with results from different webservices as and when the info becomes available. My problem is that this requests are being queued and being sent one at a time. However I want these to be sent at the same time and whichever returns first gets displayed first! Also if I try to kick off another request while these divs are loading the request seems to get queued after the others. How do I make these requests concurrent instead of queued? Thanks

  Read the article

• Where do you find images and graphics designers for your softwares ?

  - by ereOn

  Hi, As a programmer, I'm sure some of you already experienced the same problem: You create a good software (free, open-source, or for friend-only diffusion, whatever) relying on good code and good ideas but since you're a programmer and not an image designer, your program looks just bad. While it seems pretty easy to find motivated developpers to join for free an open-source project, it seems quite hard to find a single free graphic designer. What free and good resources do you usually use for your programs/websites ? Do you have any cool tip that you're willing to share ? Do you know any place where to find people involved into graphic design willing to participate to open-source projects ?

  Read the article

• How can I choose which menubar indicators are shown in 12.04?

  - by Nicholas Weininger

  I'd like to be able to tweak the set of shortcuts on the right side of the menubar in 12.04 (e.g. remove the email shortcut, remove the wifi shortcut on my laptop, add a lock screen shortcut so I can lock the screen with a single click rather than facing the choice between two clicks and Ctrl-Alt-L). Is this possible? The only thing I can find to configure in the settings is the date/time display.

  Read the article

• How do I sync two local file structures.

  - by James

  Hi, I have two large source trees. One of them has some out of date image files. I would like to automatically update all the old image files (png, jpg, gif) in one source tree with the up to date image files in the other source tree. I am using Windows 7 but I have Cygwin installed. I have tried using rsync so far but with no success. I was hoping I could do something like: rsync -r *.png newSourceTree oldSourceTree Any help would be much appreciated.

  Read the article

• grabbing text in div with jquery

  - by vick

  <a class="source" href="jquery-lead.php?source=<?=$src;?>">3</a> <script type="text/javascript"> $("a.source").live('click', function() { $("#results").load( $(this).attr('href') ); return false; }); </script> I am able to pass $src variable to my php script, but I also want to pass whatever is in the tag. In this case "3", this is going to be a pagination..

  Read the article

• Beginner for Delphi Network!

  - by Blagoj

  Hello, I worked in Delphi 6 a few years. Now I was beginning in Delphi network and I need some source code For following things: I want make chat application which to have two peer to peer clients But I don’t know how I to measure time for two clients and show it on both Screens. I also want to mark first client with 1,second with 2 ,,,,, In some application I want to have value who accounting number of sending of both clients Generally does it exist variable which is mutual for both clients?! Can somebody to send me source code of this kind?! Comments in source code will be welcome. Thank You Blagoj [email removed, return to this site for answer(s)]

  Read the article

• ?????QCon Tokyo 2010 ??????????!

  - by rika.tokumichi

  ??????OTN????????? 2010?4?19??20??????????·??????????QCon Tokyo 2010?????????? ??????????????????????????????????????????! ??????????????????????????????????^^ ???????????! >QCon Tokyo 2010 ????? ?????????? ????????????????? -------------------------------------------- ???:?? ?? (???? ????) ?????????????? - ????????CoE - ?????????? BI/SOA????????????? ???:?? ?? (???? ?????) ?????????? - ????????? - ??????????? -------------------------------------------- ??????????????????????????????????QCon Tokyo 2010?????????? QCon????????????????????????????InfoQ???????????????????????????????????????·?????????? ????????????4???????????????????????????????·?????????? InfoQ????????????????????????????????????????????????? ?1??? ??????????????Twitter????Nick Kallen??????????? ??????Data Architecture at Twitter Scale?? ?????????????????????????????????????????????????????????????????120????????????????????????????????????????? ??????????????????????????????????????????????????????????????????Twitter????????????????????????????????????????????????? ?????????????????????????????????????????????????????????????????????????????? ????????Oracle Coherence????????????Patrick Peralta??? ?Connected Clouds: A Platform for Globally Distributed Service? ??????????????? Coherence????????KVS??????????????????????????????????????Oracle Coherence?????????????????????????????????? ??????????????????????????????????????????Coherence?Push Replication Pattern?????????????????????????????????????????????????????????????????????????????????????????? ??????????????????????????? ?????????????????????????????????? ?????? ??????????????????????????2???3??????????? ???????????????????????????????! ??????????????????????????????? ?2??? 2??????????????Facebook?Marc Kwiatkowski?????????? ??????Scaling Memcache at Facebook?? 4??????????Facebook???????memcache??????????????????????????????????????? ?????????memchace????????????????????????????????memcache???????????????????????????????????????????????????????????????????????????? ????????????? Java7???????????????????????????????????? Ruby??????????????????????????????Ruby????????? ??????????????????????????? ???????????????! --------------------------------------- ?????????????????????????!! ???????????! ???????2?????????? ??????????????????????????? >QCon Tokyo 2010 ????? ?????????&??????? ?????????????Patrick Peralta?????????? >?????Connected Clouds: A Platform for Globally Distributed Service?(??) by Patrick Peralta ?Oracle Coherence????? ???? ?????? ???????????? Oracle Coherence?????(??????????) OTN????????????????????????????? ??????????????????? >???????????????????1(?????? ???) >???????????????????2(???????) ???????????????????????????????????????????????????!

  Read the article

• Windows scheduled task fails to complete with error code 0xc000013a

  - by Brian

  I'm using Windows Server 2003 and have a scheduled task that fails to complete. The task is set to run a Windows Command Script (.cmd) at 3pm each day. The script runs a program that extracts some data from a SQL Server database and uploads that data to an FTP server. The error code displayed in the "Last result" column of the scheduled tasks folder is 0xc000013a. A quick Google search leads to this Microsoft support page that states: The most common "C" error code is "0xC000013A: The application terminated as a result of a CTRL+C". No-one is logged in at the time the task runs, so there's no-one around to press CTRL+C. I'm not sure I understand what is being said here in the Microsoft documentation. I've checked the rudimentary things - the scheduled task is enabled, scheduled to run each day, and pointing to a file that does exist in a valid location. Interestingly, when I run this task manually (either by running the .cmd script from the command line, or by right-clicking the task and clicking "Run") the task completes successfully. What does this error code mean, and how can I get this task to run when I'm not there to force it?

  Read the article

• curl http_code of 000

  - by Mikkel Paulson

  I have a shell script that I use to monitor loading times and response codes on my live server cluster. It runs a total of 250 iterations every 5 minutes, distributed across 10 servers and 6 sites. It uses curl with the -w flag to return pertinent information which is then parsed by my shell script: curl -svw 'monitor_load_times %{time_total} %{http_code}' -b 'server=$server' -m 15 -o /dev/null $url 2>&1 This information is then parsed by a graphing script that can display a number of different responses. However, curl will occasionally return a response code of "000". When this happens, it seems to happen multiple times at once despite being distributed over many iterations: What I'm trying to work out is if this is a client-side issue that's skewing my results or if it's actually indicative of a server-side problem affecting my entire cluster. Does 000 mean that the connection was dropped? Database entries corresponding to curl iterations with that response code return "0.000" for the time_total value. All of the search results I've found for curl returning a code of 000 are related to HTTPS being unsupported, but all of my test URLs are HTTP. (The spike in 500 errors is a completely unrelated issue that affected my servers last night.)

  Read the article

• Troubles installing/starting Redis via Resque

  - by Craig Flannagan

  Trying to complete instructions for Resque/Redis installation here: https://github.com/defunkt/resque/blob/master/README.markdown Am stuck at where I'm trying to start up Redis via Resque at the following command: Craig:/usr/local/src/resque$ rake redis:start (in /usr/local/src/resque) Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] (See full trace by running task with --trace) Rerunning with --trace (showing only part of trace): Craig:/usr/local/src/resque$ rake redis:start --trace (in /usr/local/src/resque) ** Invoke redis:start (first_time) ** Execute redis:start Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] /Users/craigflannagan/.rvm/gems/ruby-1.9.2-head@foo/gems/rake-0.8.7/lib/rake.rb:995:in `block in sh' Not sure what is wrong here - by the way, when I did those instructions $ git clone git://github.com/defunkt/resque.git $ cd resque $ PREFIX=<your_prefix> rake redis:install dtach:install $ rake redis:start I wasn't sure whether or not I was supposed to be doing #1 from within the Rails project, or if I was supposed to have the git clone create a new folder outside the Rails project (in this case, I chose to have folder created outside the project).

  Read the article

• Wireless disconnect randomly with wpa_supplicant reason=2

  - by renenglish

  I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

  Read the article

• Get details / solve issue with a kernel panic?

  - by Joseph

  I have a Lenovo T430 running Linux Mint 13 (MATE): joseph:~$ uname -a Linux joseph-T430-LM 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I installed Mint immediately after getting the laptop about two weeks ago, and have noticed that about once a day, the computer will completely freeze up- I can't use Ctrl+Alt+Backspace to restart X, I can't use Ctrl+Alt+F1 to get a text only terminal, can't move mouse, can't type, and if any music was playing it just gets stuck in about a 1-second loop. There is a Windows partition, but I haven't had any issues in Windows. I couldn't find a common thread between the freezes, they were seemingly random (sometimes right after I clicked the mouse, sometimes not; sometimes with Pandora/flash being used, sometimes not, etc). I assume they're kernel panics since it completely locks up, but the laptop doesn't have a capslock or scroll lock LED. It is on a dock and I do have a USB keyboard, but the scroll lock/capslock lights do not flash when it happens (not sure if this is indicating its not a kernel panic, or if the kernel panic just wouldn't illuminate the LEDs on a usb keyboard attached to a laptop dock). This was annoying but not terrible. However, I've found a way to reproduce it. I have a particular CSV file that when I open up in LibreOffice Calc and scroll around, the same thing happens- complete lock up. I really need to use this file, so I'd like to fix the issue, but at the least it's given me a test case to work with. So, having a case where I can cause this issue, what can I do to better find out what's going on? I've looked in /var/log/syslog but haven't found anything seemingly useful. Any thoughts?

  Read the article

• GlusterFS on VMWare ESXi 5

  - by Dharmavir

  I want to build network file system on top of my VMWare ESXi based virtual nodes which are running Ubuntu 12.04 LTS. I am evalaluating options and found that GlusterFS (http://www.gluster.org/) can turn out to be a good choice. Purpose: I have about 2 dozen VM nodes with different configurations, on 2 physical nodes which has following configuration: 16 core Intel Xeon 1 TB 48 GB RAM Now as I said earlier each Physical server has about 1TB hdd and I can increase if I want additional so for now I have 2TB disk space available, these space is distributed in VM nodes I have created on which about 2 dozen VM nodes live. Now some of them being application server and mgmt server, they have plenty of free disk space which I want to utilize for some heavy storage which I can not design if I do that individually on single VM node. This way if my storage is distributed between dozens of VM nodes and about 2 or more physical nodes I have some sort of backup as well. I do not mind if data gets stored redundently but per my knowledge it might hapeen that individual VM nodes will not be able to store all of the data because complete data size for example if we take 100GB will exceed VM disk size of 70GB and then VM will also have system and program files on it. I need some suggestion that will GlusterFS be the solution for which I am looking forward to or I should go with something like hadoop? I am not too sure. But yes, I would like to utilize my free space on each VM node and while doing that if I get store data redundently I am okay because it will give me data security.

  Read the article

• Does a Windows 7 dvd only have one language?

  - by user326639

  I'm a Dutch developer living in Spain. I recently composed a new computer from new parts and I installed Windows 7 Professional 64 bit (OEM) on it. On the web site of the on-line shop there was a note saying "language: Spanish". Because my English is quite a bit better than my Spanish, but mainly because it is much easier to find information on the web in English, I want my OS to be in English. I asked the on-line shop if they also sold the UK version of Windows 7 but they assured me that "all Windows 7 versions are multi-language". With the installation of XP a few years ago, I remember that I was offered the option English or Spanish while the installation process was still in the DOS-like (non-graphical) screen. While installing Windows 7, I did not see any non-graphical screen and the first time I was asked about the language, was in a drop-down list that contained only Spanish. I know about the language pack possibility of Windows 7, but this is not available on Professional. Even if I had Ultimate, I don't know if it would be possible to install Windows in Spanish, and then add English as a second language from a language pack. I get the impression that English has to be the base-language. Furthermore, I am a bit sceptical until I'd see it in action. What happens with shortcuts (i.e. Select All: ctrl-a in English / ctrl-e in Spanish, and what about logging messages in Event Viewer, etc) So can anybody tell me how it works with languages in Windows 7? Have I been misinformed by the computer shop? Could it be that OEM versions of Windows are single language an a full installation is not?

  Read the article

• Google Desktop Search problems - unable to disable indexing and no index status page

  - by Howiecamp

  I've been running Google Desktop (I've used both the regular and Enterprise versions) without issues on my Windows 7 64-bit PC for a long time with no issues. I just paved my PC and reinstalled Google Desktop (regular edition). Initially, I want to use it only for the CTRL-CTRL launcher capability - I don't want it to do any indexing. So I unchecked all the items in the configuration dialog as well as excluded c:. Despite this, it is indexing all the content on my hard drive as well as Outlook email, etc. In my previous installations I had the same options set and they worked properly. The other problem I have is that when you right-click on the Google Desktop system tray icon, there used to be an option for "Index Status" which showed you the percentage complete the index creation process was, as well as an option to clear and rebuild the index. Those are no longer there. I uninstalled the regular edition and installed the Enterprise Edition, but same problems. Any ideas?

  Read the article

• Request bursting from web application Load Tests

  - by MaseBase

  I'm migrating our web and database hosting to a new environment on all new machines. I've recently performed a Load Test using WAPT to generate load from multiple distributed clients. The server has plenty of room to handle the traffic load, but I'm seeing an odd pattern of incoming traffic during the load tests. Here is the gist of our setup: Firewall server running MS Forefront TMG 2010 on Win 2k8 server Request routing done by IIS Application Request Routing on firewall machine Web server is a Hyper-V VM on the Database server (which is the host OS) These machines are hefty with dual-CPU's with six cores (12 total procs) Web server running IIS 7.5 Web applications built in ASP.NET 2.0, with 1 ISAPI filter (Url Rewrite) in front What I'm seeing during the load tests is that the requests all come through in bursts. Even though I have 7 different distributed clients sending traffic loads, the requests come through about 300-500 requests at a time. The performance monitor shows nearly all of the counters moving through this pattern, where a burst of requests comes in the req/sec jumps to 70, the queued requests jumps to 500, the current requests jumps up, the CPU jumps up, everything. Then once it's handled that group of requests, it has a lull for nearly 10 seconds where nearly nothing is happening. 0-5 req/sec, 0 queued requests, minimal CPU usage. Then after 10 seconds of inactivity, another burst comes through, spiking all of the counters once again. What I can't figure out is why the requests are coming through in bursts when I know that the load being generated is not sent that way, especially considering the various load-generating clients sending traffic all in different intervals with random think time's between each request. Is there something in the layers between Hyper-V or perhaps in the hardware which might cause this coalesce of requests together? Here is what i'm looking at, the highlighted metric is Requests/sec, but the others critical counter go with it: Requests Queued (which I'd obviously like to keep as close to 0 as possible). Any ideas on this?

  Read the article

• Script to unstick VNC keys?

  - by MidnightLightning

  I've run into dropped key events when connecting via VNC clients, leading to a "stuck key" (usually a meta key like CTRL or ALT) and searching around the common answer on how to solve it is often "press and release each meta key individually until the problem resolves". However, I've found this to be annoying and time consuming to try and solve it this way. Plus on a bad connection, it sometimes will miss the "key up" event for the meta key again, and still keep the key stuck. So I'm looking for an automated way to do this: From a script on the client side or the server side, is there a way to trigger "key up" events for all the meta keys (CTRL, ALT, SHIFT, and WIN/CMD, both Left and Right versions)? Or just a command to release all keys the server thinks are down at the moment? Or some scripted way to at least list which keys the server end thinks are down so I know which key to keep pressing and releasing to try and release it? I've got a Mac on the server end, so a Mac/Linux solution would be needed for my situation.

  Read the article

• Very uneven CPU utilization with SQL Server 2012 on 2 processor computer with 16 cores / processor

  - by cooplarsh

  After installing SQL Server Enterprise 2012 with the Server + Cal license model, on a computer with 2 processors each with 16 cores (and no hyperthreading involved) and putting the server under extremely heavy load the 16 cores on the first processor were very underutilized, the first 4 cores on the 2nd CPU were heavily utilized, and the last 12 cores were not used at all (because of the 20 core limit for this sql server version). Total CPU utilization was displaying as around 25%. Unfortunately, the server suffered from extremely poor performance even though if the tasks were evenly distributed across the 20 cores it wouldn't have been anywhere near as bad. The Windows Server was running on a VMWare virtual image under ESX Server, but all of the CPU was allocated to the windows server. We tried changing affinity settings (e.g., allocating most cores to CPU and the others to I/O), but that didn't help solve the performance problems. Upgrading the product edition to SQL Server Enterprise Core 2012 not only allowed the SQL Server to utilize the 12 previously unused cores on the 2nd processor, but it also resulted in a much more even distribution of tasks across all of the processors. To get through the backlog of requests cpU utilization jumped to around 90%, and then came down to around 33% once it was caught up, but performance improved dramatically since we failed over to the newly updated version And the performance issues went away. I was wondering if anyone knows what might cause SQL Server to unevenly distribute the load, relying almost exclusively on the first 4 cores of the 2nd processor that had 12 cores idle, and allocate only a few tasks to each of the 16 cores on the first processor. Also, is there any way we could have more evenly distributed the load across the 20 cores that were being used without the product edition upgrade? The flip side of that question is what did the product upgrade do that caused SQL Server to start evenly distributing the load across all of the cores that it recognized? Thanks to any insight to answer these questions and/or links that might help me better understand how to make sense of what was happenings.

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >