Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 274/1221 | < Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >

  • Internet setup for my office

    - by prakash
    We have two internet connections to our office and our current setup is like this.. The internet connections require pppoe log in so i take each cable and plug it into a wifi router and configure the router to log in to the pppoe and then plug in a cable from the router to a switch and distribute the internet throughout my office. The problem with this setup is it is really hard to monitor and im not able to monitor who is hogging internet usage and what he or she is actually using it for. apart from this we also have a nas setup which is routed through another switch . Could someone please throw a little light on how i can restructure this setup for easy monitoring and better transparency... ? each wan router is connected to a different switch and is distributed to users accordingly.. we have around 40 users in the office.. we want to setup a single linux box to which i want to connect the two wan connections and from there distribute it to all our users.... im looking for a solution where we do not have to invest more that buying a single pc and a couple of nics

    Read the article

  • DNS no longer works after server reboot

    - by Burning the Codeigniter
    Strangely enough, when I reboot my Ubuntu 12.04 server, the DNS no longer works, which makes the domain unavailable to access to my site. Normally the DNS should be working after a reboot, but this doesn't happen anymore. I use nginx to serve content, but nginx is already configured to work with my domains. What are the typical practises must I do after a reboot and how can I solve this issue I experience? I already have BIND, networking and resolvconf to boot when the server boots up. ; <<>> DiG 9.8.1-P1 <<>> mysite.com ;; global options: +cmd ;; connection timed out; no servers could be reached This is my output with dig $ttl 38400 mysite.com. IN SOA ns1.mysite.com. webmaster.mysite.com. ( 1055026205 6H 1H 5D 20M ) mysite.com. IN A xx.xx.xx.xx # Server IP *.mysite.com. IN A xx.xx.xx.xx # Server IP www.mysite.com. IN CNAME mysite.com. ns1.mysite.com. IN A xx.xx.xx.xx # Server 2nd IP ns2.mysite.com. IN A xx.xx.xx.xx # Server 3rd IP mysite.com. IN NS ns1.mysite.com. mysite.com. IN NS ns2.mysite.com. mail.mysite.com. IN MX 1 mysite.com. This is the contents of /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 85.17.150.123 nameserver 85.17.96.69 nameserver 62.212.64.122 search localdomain After using more dig commands, outputs: ; <<>> DiG 9.7.3-P3 <<>> @85.17.150.123 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 24847 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 2145 msec ;; SERVER: 85.17.150.123#53(85.17.150.123) ;; WHEN: Mon Nov 5 16:31:32 2012 ;; MSG SIZE rcvd: 30 ; <<>> DiG 9.7.3-P3 <<>> @85.17.96.69 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 27879 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 949 msec ;; SERVER: 85.17.96.69#53(85.17.96.69) ;; WHEN: Mon Nov 5 16:32:59 2012 ;; MSG SIZE rcvd: 30 ; <<>> DiG 9.7.3-P3 <<>> @62.212.64.122 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: REFUSED, id: 29293 ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 825 msec ;; SERVER: 62.212.64.122#53(62.212.64.122) ;; WHEN: Mon Nov 5 16:33:39 2012 ;; MSG SIZE rcvd: 30 With Google DNS (8.8.8.8): ; <<>> DiG 9.7.3-P3 <<>> @8.8.8.8 mysite.com ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 38498 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;mysite.com. IN A ;; Query time: 3982 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Nov 5 16:37:27 2012 ;; MSG SIZE rcvd: 30

    Read the article

  • WAN Optimization for Small Office/Home Office

    - by TiernanO
    I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

    Read the article

  • Problem creating ODBC connection to SQL Server 2008 with Vista

    - by earlz
    Well, I'm trying to get a database schema thing working, first I tried just doing it in Linux where I'm more comfortable, but ODBC seems to be a hack there and I couldn't get it to work. So I figured it shouldn't be too hard in Windows.. Ok, so I created a SQL Server Client Alias so that I can simply same windowsserver to refer to my SQL server. Then, I went to the ODBC configuration in Control Panel. I clicked Add in the User DSN section. I chose Native SQL Server (10), and then clicked next. Then I typed a short name and a description and gave the servername as windowsserver/SQLEXPRESS Then, I click next, give it my user name and password and click next. Then, after like 2 minutes it says "Login Timeout Expired" What can be wrong here? I know the server is configured cause I have SQL Server Management Studio opened up with that server in it. I'm also just trying to connect over regular TCP/IP and my firewall is disabled.

    Read the article

  • Kickstarting an Ubuntu Server 10.04 installation (DHCP fails)

    - by William
    I'm trying to automate the network installation of Ubuntu 10.04 LTS with an anaconda kickstart and everything seems to running except for the initial DHCP autoconfiguration. The installer attempts to configure the install via DHCP but fails on its first attempt. This brings me to a prompt where I can retry DHCP and it seems to always work on the second attempt. My issue is that this is not really automated if I have to hit retry for DHCP. Is there something I can add to the kickstart file so that it will automatically retry or better yet not fail the first time? Thanks. Kickstart: # System language lang en_US # Language modules to install langsupport en_US # System keyboard keyboard us # System mouse mouse # System timezone timezone America/New_York # Root password rootpw --iscrypted $1$unrsWyF2$B0W.k2h1roBSSFmUDsW0r/ # Initial user user --disabled # Reboot after installation reboot # Use text mode install text # Install OS instead of upgrade install # Use Web installation url --url=http://10.16.0.1/cobbler/ks_mirror/ubuntu-10.04-x86_64/ # System bootloader configuration bootloader --location=mbr # Clear the Master Boot Record zerombr yes # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --size 512 part / --fstype ext3 --size 1 --grow # System authorization infomation auth --useshadow --enablemd5 %include /tmp/pre_install_ubuntu_network_config # Always install the server kernel. preseed --owner d-i base-installer/kernel/override-image string linux-server # Install the Ubuntu Server seed. preseed --owner tasksel tasksel/force-tasks string server # Firewall configuration firewall --disabled # Do not configure the X Window System skipx %pre wget "http://10.16.0.1/cblr/svc/op/trig/mode/pre/system/Test-D" -O /dev/null # Network information # Start pre_install_network_config generated code # Start of code to match cobbler system interfaces to physical interfaces by their mac addresses # Start eth0 # Configuring eth0 (00:1A:64:36:B1:C8) if ip -o link show | grep -i 00:1A:64:36:B1:C8 then IFNAME=$(ip -o link show | grep -i 00:1A:64:36:B1:C8 | cut -d" " -f2 | tr -d :) echo "network --device=$IFNAME --bootproto=dhcp" >> /tmp/pre_install_ubuntu_network_config fi # End pre_install_network_config generated code %packages openssh-server

    Read the article

  • bond0:0 + define virtual IP

    - by yael
    in my Linux server I have the following: Linux Version - RedHat-Linux- 5.3.0.0 (this Linux server only only one LAN) more /etc/sysconfig/network-scripts/ifcfg-bond0:0 DEVICE=bond0:0 ONBOOT=yes BOOTPROTO=static IPADDR=10.10.10.12 NETMASK=255.255.255.0 ifconfig -a bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) bond0:0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:10.10.10.12 Bcast:1.1.1.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 eth0 Link encap:Ethernet HWaddr 00:0E:0C:C7:F8:92 inet addr:1.1.1.1 Bcast:1.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:fec7:f892/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8600 errors:0 dropped:0 overruns:0 frame:0 TX packets:4764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:717979 (701.1 KiB) TX bytes:598620 (584.5 KiB) Memory:b8820000-b8840000 my problems: why I get HWaddr 00:00:00:00:00:00 and not the real MAC address I cant ping to other server with 10.10.10.11 from my server is it possible to define bond0:0 when I have only one LAN (eth0) other info: more /etc/modprobe.conf alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptsas alias scsi_hostadapter2 ata_piix alias bond0 bonding alias bond1 bonding

    Read the article

  • Random “Lost connection to MySQL server at 'reading initial communication packet', system error: 0”

    - by user1606545
    Sometimes I get the error from MYSQL server: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I cannot find the cause, since most of the time it works, but every week for some hours I get this error. I googled, but there seem to be only users which have this error permanently. But in this case, it only occurs sometimes. I checked hosts.allow and hosts.deny, but the host is allowed and not denied. Also sometimes I get the error: File './database/table.MYD' not found (Errcode: 24) It occurs very rarely. But it occurs for some hours once a week, sometimes on multiple days, but suddenly the problem disappears again. I have checked the open files limit. It's 2048 and should be absolutely enough. I also tried to increase the number of open files nevertheless, but no effect. I thought, perhaps the process does not close some tables. But this is impossible, because after a while everythings o.k. again and the process opens maximum 100 tables at once. I also checked the MySQL-runtime-environment, and there were 930 opened files. I cannot explain that. After a while it's 129. I am running a MySQL-Server on a SUSE-Linux machine. I connect to the MySQL-Server from another host by the command line tool "mysql" and by MySQL-C-connector. The MySQL-Server is version 5.0.67.

    Read the article

  • How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

    - by Gizmo
    I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

    Read the article

  • Setting up a VPN tunnel between a Linux box and a Cisco FW

    - by Meni
    Hi. I have a linux box (ubuntu) and I have a service provider that will only allow an IPSEC tunnel connection between his network and my linux box. I have these details from the service provider: Service Provider: Peer IP – Lan on service provider's side - 10.10.10.10/24 Linux box details: Peer IP - Lan - Connection details: Phase1: Sha Aes 128 DH - group x Preshared – Lifetime – 24h Phase2: Sha Aes 128 Lifetime – 1h I am not sure which app I need to install on the linux box that will support this type of connection. Any ideas? Thanks!

    Read the article

  • How to install (old) packages for Ubuntu 9.04?

    - by wchrisjohnson
    Based on some excellent feedback by Mark here (http://serverfault.com/questions/285598/should-i-clone-a-physical-server-to-create-a-vm-for-a-staging-server), today I was able to use the vmware converter to clone my production server for a staging server. However the nic won't come up no matter what I do. I attempted to inistall vmware tools, as I suspect that the fact that it is not installed might prevent the nic from working. (I have the nic set as a vmxnet3 card in the vm settings). The install failed because there were several dependencies missing as well as the Linux headers. Given that Ubuntu 9.04 has been EOL'd, the packages I need to install to get the vmware tools to install are no longer available. I doubt the ubuntu 9.04 install CD has the packages on it. What are my options? I'd rather not upgrade the version of Ubuntu yet, as the point of the vm right now is to maintain parity with the production server. Might I have better luck resetting the driver to use vmxnet2 instead of the vmxnet3? Thanks in advance! Chris

    Read the article

  • VM: Windows 7 host, Linux guest, VT-d?

    - by chx
    I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

    Read the article

  • Can next hop address be same as destination address?

    - by Raj
    Like if host address is 100.0.0.1 and next hop address is 100.0.0.2 and destination ip address is also 100.0.0.2 Is this a valid use case? Any real life usage? <dest ip> <next hop> ip route 100.0.0.2 255.255.255.255 100.0.0.2 weight 1 next-hop-vrf GlobalRouter Above is the command on a router inside a VRF. 100.0.0.2 is pingable from host. 100.0.0.1 & 100.0.0.2 are an ip address assigned to a VLAN on host & destination respectively. On a linux box, Such configuration is valid. [root]# netstat -r -n Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 55.55.55.55 55.55.55.55 255.255.255.255 UGH 0 0 0 eth0 [root]# ip route show 55.55.55.55 via 55.55.55.55 dev eth0 As per my understanding, If a destination IP is reachable (i.e in the same subnet of host IP) we dont need a next hop. I came across one application for using next hop for destination IP in same subnet (i.e for VPN) See this: Will packets send to the same subnet go through routers? If next hop != destination IP but they are in same subnet as that of host, is a valid scenario for VPN, then i am wondering what are the applications of next_hop==dest_ip & subnet same as host? This is my first post in Super User. Extremely happy with the quick and warm response.

    Read the article

  • How can I optimize my ajax calls to deliver at 60ms.

    - by Quintin Par
    I am building an autocomplete functionality for my site and the Google instant results are my benchmark. When I look at Google, the 50-60 ms response time baffle me. They look insane. In comparison here’s how mine looks like. To give you an idea my results are cached on the load balancer and served from a machine that has httpd slowstart and initcwnd fixed. My site is also behind cloudflare From a server side perspective I don’t think I can do anything more. Can someone help me take this 500 ms response time to 60ms? What more should I be doing to achieve Google level performance? Edit: People, you seemed to be angry that I did a comparison to Google and the question is very generic. Sorry about that. To rephrase: How can I bring down response time from 500 ms to 60 ms provided my server response time is just a fraction of ms. Assume the results are served from Nginx - Varnish with a cache hit. Here are some answers I would like to answer myself assume the response sizes remained more or less the same. Ensure results are http compressed Ensure SPDY if you are on https Ensure you have initcwnd set to 10 and disable slow start on linux machines. Etc. I don’t think I’ll end up with 60 ms at Google level but your collective expertise can help easily shave off a 100 ms and that’s a big win.

    Read the article

  • Tried to install Mint to a Flash Drive. Now I can't boot from the main hard disk.

    - by Dan
    Hello, all. I'm kind of new to Linux and I need some help. I wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt: error: no such device: (some long hex val) grub rescue> However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation, but, again, I'm kind of new to Linux, so I'm not sure exactly why. Any help is greatly appreciated.

    Read the article

  • cheap gigabit switch for small business

    - by neoice
    my friend's business is currently borrowing my Adtran 1224R and is very happy with it. it's configured with a few VLANs to segment customers, internal traffic and public wifi. port 1 is a "trunk" port to the router, a chunky Linux box with iptables+NAT. they push a lot of traffic over the LAN (data backups) and really need gigabit. besides, I'd like my Adtran back :P my goal is to find a cheap(ish) switch that can function as a drop-in replacement. it looks like VLAN trunking is actually part of the 802.1q spec, so anything with VLAN support should cover the current trunk-to-router setup. it's nice to have both a web interface and SSH, but I can configure it either way if needed. things like the Netgear GS724T have caught my eye, but it seems like none of the hardware in the $300-500 range have really solid reviews. I'm concerned that "cheaper" hardware might not work for a network full of power users. does anyone have a recommendation for the Netgear GS724T or a switch that will meet my needs?

    Read the article

  • How do I fully share a Hard Drive on my Local Network?

    - by GingerLee
    I have 4 computers connected to a router (DD-WRT) My main PC is Windows 7 (Home Premium). This machine has 2 Hard Disks: HD1 is used for my OS and the other (HD2) is used to store files. My 3 other machines are 1. Ubuntu Destop that I use to learn about linux, 2. A Mac OSX laptop, and 3. A netbook running windows 7. How do I easily share HD2 with my other machines? I would like all my machines to have full access & permissions to HD2 however I would like to RESTRICT access to only PCs that are connected to my router (either via LAN and WiFi) --- btw, I know this is not very secure due to WiFi vulnerability , however, I currently MAC address restrict WiFi connections my router. Extra Info: I have already tried to use the Windows Folder Sharing feature: i.e. I right click over the icon of HD2, and click on the Sharing Tab, but in sub-window labeled "Network File and Folder Sharing", the "Share" button is grayed out. I can click on "Advanced Shared" but that just takes me to a screen in which I have to set certain permissions. What is not clear to me is: How do I set a criteria that shares HD2 with all computer connected to my router?

    Read the article

  • Mysterious swap usage on EC2

    - by rusty
    We're in the middle of a project to move our infrastructure from a co-lo situation into Amazon EC2 and we've noticed some weird memory characteristics of the processes in our setup. Without going into too much detail about the specifics of our processes, we've noticed that on our EC2 instances "top" will show processes using a lot of swap space -- in fact, much greater than the amount of available swap or (if you add it all up) more than the available disk. Here's a sample top output: Mem: 7136868k total, 5272300k used, 1864568k free, 256876k buffers Swap: 1048572k total, 0k used, 1048572k free, 2526504k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ SWAP COMMAND 4121 jboss 20 0 5913m 603m 14m S 0.7 8.7 3:59.90 5.2g java 22730 root 20 0 2394m 4012 1976 S 2.0 0.1 4:20.57 2.3g PassengerHelper 20564 rails 20 0 2539m 220m 9828 S 0.3 3.2 0:23.58 2.3g java 1423 nscd 20 0 877m 1464 972 S 0.0 0.0 0:03.89 876m nscd You can see, for instance, that jboss is reportedly using 5.2 gigs of swap space which is definitely impossible since there's only 1G allocated and none is being used (probably because there's still 1.8G of RAM free). And here's the results of uname -a: Linux xxx.yyy.zzz 2.6.35.14-106.53.amzn1.x86_64 #1 SMP Fri Jan 6 16:20:10 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux We're running an AMI based off of the default Amazon Linux AMI (Amazon Linux AMI release 2011.09, so some RHEL5 and RHEL 6) with not too many customizations and definitely no kernel-level customizations. Something here tells me that on this particular kernel/distribution, the reporting of swap or maybe even total memory usage isn't what it appears to be... Any help would be appreciated!

    Read the article

  • Can only ssh when not using wifi

    - by AChrapko
    So I have 3 machines, a windows 7 desktop that is always wired to my router, osX laptop, and raspberry pi running debian linux. My router is a Linksys e1000 wireless N. My goal is to be able to ssh the raspi from any machine, while it is connected via wifi. My problem is that when trying to ssh from either the win7 or osX to the Pi it either times out, or gives an error: "ssh: connect to host 192.168.1.### port 22: No route to host" The only times that I have managed to connect to the pi from any machine were when it connected to the router via an Ethernet cable. Currently with win7 desktop wired, macbook wireless, and pi wireless tests give the following: win7 ping macbook: Destination host unreachable. macbook ping win7: Request timeout. win7 ping pi: Destination host unreachable. macbook ping pi: Request timeout. blah blah blah Plugging the macbook into the router with an Ethernet cable all communication between win7 and macbook works. Pings, ssh, ftp, smb ect... No changes to the pi, still no connections possible to or from any of the other 2 machines. Note All machines, are able to connect to the internet and ssh to the same machine on a completely different network, wired or over wifi. Plugging the Pi in with Ethernet (and macbook still wired) I can ssh to the pi from both win7 and macbook. I can ssh from the pi to macbook. All machines still able to connect the the off network machine. Also another little side note- I was playing warcraft 3 with my roommates the other day, and the only time they were able to see my LAN game was when they were plugged into the router with an Ethernet cable. Once or twice one of the laptops was able to connect over wifi, but not without another computer connecting first via Ethernet. So basically does anyone have any info as to why my router seems to completely ignore local wireless traffic?

    Read the article

  • linux vs windows and web server question

    - by student
    What are the differences from security point of view running a web server on linux and running a web server on windows. I heard that almost nobody going to attack linux machine. Is that true? or Linux is hard to attack and nobody want to waste his time?

    Read the article

  • dual boot with windows and linux

    - by nuttynibbles
    hi, i have windows xp installed. Recently i installed suse linux and afterwhich suse linux is the main OS to be booted up. However suse rovide options to boot windows 1 (window xp) during boot up. If i uninstall suse linux (i've tried), windows won't be able to be booted up as the grub master boot will be corrupted. my question is: is there a software tool which can be booted on cd to modify the master boot record so as to reduce much effort??

    Read the article

  • dual boot with windows and linux

    - by nuttynibbles
    hi, i have windows xp installed. Recently i installed suse linux and afterwhich suse linux is the main OS to be booted up. However suse rovide options to boot windows 1 (window xp) during boot up. If i uninstall suse linux (i've tried), windows won't be able to be booted up as the grub master boot will be corrupted. my question is: is there a software tool which can be booted on cd to modify the master boot record so as to reduce much effort??

    Read the article

  • Accessing the partitions on an VLM volume

    - by projix
    Suppose you have an LVM volume /dev/vg0/mylv. You have presented this as a virtual disk to a virtualised or emulated guest system. During installation the guest system sees it as /dev/sda and partitions it into /dev/sda{1,2,5,6} and completes the installation. Now at some point you need to access those filesystems from within the host system, without running the guest system. fdisk sees these partitions just fine: # fdisk -l /dev/vg0/mylv Device Boot Start End Blocks Id System /dev/vg0/mylv1 2048 684031 340992 83 Linux /dev/vg0/mylv2 686078 20969471 10141697 5 Extended /dev/vg0/mylv5 686080 8290303 3802112 83 Linux /dev/vg0/mylv6 8292352 11980799 1844224 83 Linux However, the devices such as /dev/vg0/mylv1 do not actually exist. I guess that because they're within an LV, the OS does not recognise this type of nesting by default. Is there any way I can prod Linux so that /dev/vg0/mylv1 or equivalent appears and thus becomes mountable within the host system? I understand that it's possible with qemu-nbd, and will use this if necessary. However, I was hoping for something more direct if possible, rather than simulating a network block device and attaching that.

    Read the article

  • Methods and practices for managing a network that has no internet connection

    - by FaultyJuggler
    Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

    Read the article

  • Private subnet for VM server host-only network

    - by Derek Pressnall
    At my current job, we distribute a product based on a Linux server with multiple VMs defined (using KVM / libvirt). We are planning to expose limited ports to the customer's network, and use iptables to direct inbound traffic to the appropriate internal VM. My question: is there a class of private subnets that I can use for the internal host-only network that is least likely to conflict with a client IP subnet? Specifically, if I choose a /24 out of any of the RFC-1918 defined private subnets (such as 192.168.x.x), there is a chance of conflicting with a customer-used range. I noticed that several current VM implementations default to 192.168.122.x -- is this due to an RFC that I'm not familiar with, and therefore this is a safe range to use (that most network admins would avoid)? Or did the various VM vendors just pick that range randomly? I guess I'm looking for an IP range that is more private than the existing private (RFC1918) addresses. The only other thought I had was to use one of the "Test Net" IP ranges reserved for documentation purposes (RFC 5737). Note, that I'm not worried about a customer's network blocking these IPs, as this is only internal to our server (packets get NATted before leaving the box). However this does seem more unorthodox than just sticking with the default 192.168.122.x/24 subnet.

    Read the article

< Previous Page | 270 271 272 273 274 275 276 277 278 279 280 281  | Next Page >