Search Results

Search found 51778 results on 2072 pages for 'super columns'.

Page 275/2072 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

  • Windows XP does not list WPA wireless networks

    - by Tomalak
    What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

    Read the article

  • Can't view other computers on Network

    - by Darkart
    Systems: My Machine: Windows 7 Ultimate connected through ethernet into router Her Machine--Other Machine: Windows 7 Ultimate connected through wireless Router:F5D8236-4 N Wireless Router Version 1 Firmware: 2.01.03 (Apr 28 2009) ISP: Comcast Problem: I can not view the "Other Machine" on the network at all. I opened command prompt and ran net view and saw the pc name. I tried pinging the pc and it times out. Went inside the router and tried viewing the computer on the DHCP list and it can not be seen. I restored the router back to default settings and firmware and completely reset the modem and router, and created home group. I went to the other machine to configure home group settings and made sure that both PC's had identical settings. She was able to see my machine but I could not see hers. I restarted both machines and now we cant see each other at all. Also her PC ("Other Machine") had exclamation mark in the wireless icon but was connected just fine. There is no firewalls on currently or anti-virus enabled, and still can not see each other. Right now I am checking for updated drivers for the wireless card, but my question is could it be the router or something hardware related? I have went through all the settings in the Home group and visited most FAQ's and still no luck. Also as it stands I can not view her machine inside the router DHCP Client List :(

    Read the article

  • Setting up two screens in Xorg

    - by viraptor
    I'be got two Nvidia cards, but Xorg activates only one of them. The following config is based on the nvidia configurator output: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" LeftOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Module" Load "dbe" Load "extmod" Load "type1" Load "freetype" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "HP LE2201w" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Acer AL2017" HorizSync 30.0 - 82.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 6100 nForce 405" BusID "PCI:0:13:0" EndSection Section "Device" Identifier "Card1" Driver "nvidia" VendorName "nVidia Corporation" BoardName "GeForce 8400 GS" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection What I see in the log file is: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 11:08:08 2010 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (==) No device specified for screen "Screen0". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (==) No device specified for screen "Screen1". Using the first device section listed. (**) | |-->Device "Card0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "Xinerama" "0" (==) Automatically adding devices (==) Automatically enabling devices even though later on both cards are detected: (--) PCI:*(0:0:13:0) 10de:03d1:1019:2601 nVidia Corporation C61 [GeForce 6100 nForce 405] rev 162, Mem @ 0xfb000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 (--) PCI: (0:2:0:0) 10de:0422:0000:0000 nVidia Corporation G86 [GeForce 8400 GS] rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072 [ --- some more logs --- ] (II) Mar 19 11:08:10 NVIDIA(0): NVIDIA GPU GeForce 6100 nForce 405 (C61) at PCI:0:13:0 (II) Mar 19 11:08:10 NVIDIA(0): (GPU-0) [ --- some more logs --- ] (II) Mar 19 11:08:12 NVIDIA(GPU-1): NVIDIA GPU GeForce 8400 GS (G86) at PCI:2:0:0 (GPU-1) Unfortunately later on only one card is initialised and one screen is active. Xrandr shows only one screen too. Any ideas on how to fix it?

    Read the article

  • ClearType setting ignored in Windows Virtual PC with Windows XP Pro

    - by Yadyn
    I have a VM set up through Windows Virtual PC for Windows XP Pro and I have been completely unable to get ClearType to work. I have turned it on in the Display - Appearance - Effects dialog but it seems like it completely ignores this. All text is still without any anti-aliasing. Even setting it to normal smoothing doesn't work. If I disable Integration Features, it seems to work, but then I lose a lot of nice features. What's weirder, is that the Windows XP Mode installed with Windows Virtual PC (this is separate from my XP Pro VM) works with both ClearType and Integration Features just fine. I turned it on the same way and it works like a charm, no problems. I'm running Windows 7 Professional 64-bit as the host OS and have the latest (to my knowledge) Windows Virtual PC installed. The only funny business I can think of is that I've enabled 24-bit color via the Group Policy setting inside each XP virtual machine (both Pro and the stripped down XP mode copy). This is a fairly well-known trick documented all over the web, but here's a typical post about it.

    Read the article

  • How to use remote microphone on Remote Desktop

    - by user553702
    I wish to connect to a remote Windows 7 PC that has a microphone, and use that local microphone (on the destination PC) in recording applications. Unfortunately whenever I connect on Remote Desktop, the remote PC's local microphones become hidden and disabled. Remote Desktop seems to force using the source computer's microphone with redirection, without an option to use the remote PC's microphone Isn't there a way to enable using the remote PC's microphone? I don't get why this should be so hard.

    Read the article

  • Flash plugin locks up Firefox, Chrome and Safari behind a corporate proxy, IE6 works fine

    - by Shevek
    At work I am forced by corporate policy to use IE6. Obviously this is not so good so I use FF for most of my browsing. However there is a problem once I have installed the Flash plug-in - FF locks up when trying to load Flash media. Looking at the status bar at the time of the lock up it appears this happens when the browser tries to get cross domain data. The Flash Active X plug-in in IE does not suffer this issue. I have tried it in a brand new profile in FF with Flash as the only plug in and it locks up. We have 2 different proxy servers and both exhibit the same problem. I have also tried Chrome and Safari and both lock up with the plug-in installed. So, has anyone else had this problem and solved it? Or, is there any way to disable cross domain data access in the flash plug-in? Or, is there any way to disable the "This site needs an additional plug-in" ribbon which appears when the plug-in is not installed. Many thanks!

    Read the article

  • Perl -e insert new line

    - by lydonchandra
    Hi If I do this in bash perl -e '$x; $y' Is there any character that can behave like a new line? i.e. I want to do perl -e '$x; some_chars_as_new_line $y' where perl interpreter actually sees an actual new line. $x; $y; Many thanks

    Read the article

  • Taskbar disappears sometimes when using a second monitor

    - by Alcenaia
    Windows 7 laptop, docked with a second monitor. This problem started happening when I started using the second monitor. The taskbar will often stop displaying. The Windows logo remains, but the bar, system tray, clock, and any icons for minimized programs disappear. I can see part of my desktop wallpaper where the taskbar should be. The taskbar is not set to auto-hide. Killing the explorer.exe process and starting it again temporarily fixes this. Is there a permanent solution? Thanks!

    Read the article

  • IIS Server on XP Machine with tweaked registry and services

    - by user420667
    I have been trying for some time now to setup a webapp on my XP machine at home. Prior to doing this, I had tweaked the registry settings, fiddled with disabling and enabling servies, without recording what I tweaked, which I imagining could be what's causing the problem. I don't want to "reboot" to factory settings, although I suppose that would be nice to know how to do as well. I am more interested in finding out what settings could have influenced the behavior, and who I could contact / what information I could send them that would aid in solving the problem. Thanks.

    Read the article

  • GPT Partitioning help!!

    - by iamairborne
    Hi, I have a GPT partitioned portable HDD which is not being detected by Windows XP and a non working CD Drive.Can I download and use Ubuntu to boot from and access the data? Or is there some other way?

    Read the article

  • How to make the start menu finds a program based on a custom keyword?

    - by Pierre-Alain Vigeant
    I am searching for a way to type a keyword in the start menu Search programs and files field and that it will return the application that match the keyword. An example will better explain this: Suppose that I want to start the powershell. Currently what I can type in the search field is power and the first item that appear is the 64bits powershell shortcut. Now suppose that I'd like ps to return powershell as the first item of the search list. Currently, typing ps return all files with the .ps extension, alongs with a control panel options about recording steps but not the powershell executable itself. How can I do that?

    Read the article

  • UBUNTU Desktop Installation 9.10 via USB (boot)

    - by user277980
    i have made a live boot usb using UnetBootIn tool for ubuntu desktop 9.10 , i have windows xp sp2 installed as primary os and i want to make a partition for ubuntu but when i try to boot it via usb , it just goes to boot menu of ubuntu , then i enter the default type for installation after that nothing happens , just the ubuntu logo showed up and just that nothing happens after that , i can try the simpler task also i.e.via cd install but i want to know what's not working with this usb boot method Thnx n Advance

    Read the article

  • How to restore a VirtualBox image given the .vdi file

    - by Ramon Tayag
    Background I have VirtualBox on Linux and recently the drive with the system files failed on me. I'm able to use the Live CD to view the files of the storage drive, and through this, I can copy my data files to another computer while I work on this one. How do I load the .vdi in another computer (or in this case, the fresh install of Ubuntu)? I see many samples online of how to export it, but it assumes the host is currently working. Thanks!

    Read the article

  • Web based library management (FOSS) application

    - by pgb
    I'm looking for a FOSS web-based library management application. I want to manage the few books we have at our company, and I'm looking for applications that provide a simple web interface to: Add new books. Search for books. (Not Required) Place holds on books. My ideal would be something like Delicious Library, but web based and open source. I've looked at Koha (which I could not install), Emilda, which seems to be a dead project (last emails are from 2006 and I could not install it) and VuFind which looks awesome but doesn't provide (or I could not find) an interface to add new records to the library. Any suggestions?

    Read the article

  • Is there any multi-touch graphics tablet with Linux drivers?

    - by Zifre
    After watching the absolutely amazing 10/GUI video, I have been dying to try to implement something like this. I can do the software side quite easily, but I don't have the hardware. The Wacom Bamboo Fun would work, but the Linux drivers don't support the multi-touch features. Microsoft's "UnMouse Pad" looks like the perfect solution, but it is not commercially available yet. Are there any similar devices that would work? Alternatively, is there a way to build a DIY version? (It is fairly easy to build a multi-touch display with a webcam and IR LEDs, but it would not be pressure sensitive. Does anyone have any info on how the UnMouse Pad works and if it is possible to build one?) EDIT: I should clarify that I don't want a multi-touch display. I want the sensor to be separate from the display. If that sounds crazy, watch the 10/GUI video.

    Read the article

  • How to fix error 1330 (invalid digital signature) when installing "The Rosetta Stone"

    - by victoriah
    I bought an older version of this software from a friend and the Rosetta Stone support hasn't been of much use. When installing, at the end of the process I get an error from the installer that says something along the lines of: Error 1330. A file that is required cannot be installed because the cabinet file [file.cab] has an invalid digital signature. This isn't the first time I've had such an error, some time ago I was unable to install a game I bought because of the same thing. I extracted the cab file itself just to see what it was and it's just an archive of icons and things like that, so it's not even like I'm missing out on much :/ Any advice/tips on how to work around this error would be appreciated e.g. if it's possible to make the installer ignore digital signatures. Running Windows 7.

    Read the article

  • video and file caching with squid lusca?

    - by moon
    hello all i have configured squid lusca on ubuntu 11.04 version and also configured the video caching but the problem is the squid cannot configure the video more than 2 min long and the file of size upto 5.xx mbs only. here is my config please guide me how can i cache the long videos and files with squid: > # PORT and Transparent Option http_port 8080 transparent server_http11 on icp_port 0 > > # Cache Directory , modify it according to your system. > # but first create directory in root by mkdir /cache1 > # and then issue this command chown proxy:proxy /cache1 > # [for ubuntu user is proxy, in Fedora user is SQUID] > # I have set 500 MB for caching reserved just for caching , > # adjust it according to your need. > # My recommendation is to have one cache_dir per drive. zzz > > #store_dir_select_algorithm round-robin cache_dir aufs /cache1 500 16 256 cache_replacement_policy heap LFUDA memory_replacement_policy heap > LFUDA > > # If you want to enable DATE time n SQUID Logs,use following emulate_httpd_log on logformat squid %tl %6tr %>a %Ss/%03Hs %<st %rm > %ru %un %Sh/%<A %mt log_fqdn off > > # How much days to keep users access web logs > # You need to rotate your log files with a cron job. For example: > # 0 0 * * * /usr/local/squid/bin/squid -k rotate logfile_rotate 14 debug_options ALL,1 cache_access_log /var/log/squid/access.log > cache_log /var/log/squid/cache.log cache_store_log > /var/log/squid/store.log > > #I used DNSAMSQ service for fast dns resolving > #so install by using "apt-get install dnsmasq" first dns_nameservers 127.0.0.1 101.11.11.5 ftp_user anonymous@ ftp_list_width 32 ftp_passive on ftp_sanitycheck on > > #ACL Section acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl > to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 # https, snews > acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl > Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews > acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl > Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port > 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port > 591 # filemaker acl Safe_ports port 777 # multiling http acl > Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl > Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method > CONNECT http_access allow manager localhost http_access deny manager > http_access allow purge localhost http_access deny purge http_access > deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow > localhost http_access allow all http_reply_access allow all icp_access > allow all > > #========================== > # Administrative Parameters > #========================== > > # I used UBUNTU so user is proxy, in FEDORA you may use use squid cache_effective_user proxy cache_effective_group proxy cache_mgr > [email protected] visible_hostname proxy.aacable.net unique_hostname > [email protected] > > #============= > # ACCELERATOR > #============= half_closed_clients off quick_abort_min 0 KB quick_abort_max 0 KB vary_ignore_expire on reload_into_ims on log_fqdn > off memory_pools off > > # If you want to hide your proxy machine from being detected at various site use following via off > > #============================================ > # OPTIONS WHICH AFFECT THE CACHE SIZE / zaib > #============================================ > # If you have 4GB memory in Squid box, we will use formula of 1/3 > # You can adjust it according to your need. IF squid is taking too much of RAM > # Then decrease it to 128 MB or even less. > > cache_mem 256 MB minimum_object_size 512 bytes maximum_object_size 500 > MB maximum_object_size_in_memory 128 KB > > #============================================================$ > # SNMP , if you want to generate graphs for SQUID via MRTG > #============================================================$ > #acl snmppublic snmp_community gl > #snmp_port 3401 > #snmp_access allow snmppublic all > #snmp_access allow all > > #============================================================ > # ZPH , To enable cache content to be delivered at full lan speed, > # To bypass the queue at MT. > #============================================================ tcp_outgoing_tos 0x30 all zph_mode tos zph_local 0x30 zph_parent 0 > zph_option 136 > > # Caching Youtube acl videocache_allow_url url_regex -i \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.com\/videoplayback \.youtube\.com\/videoplay > \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.[a-z][a-z]\/videoplayback \.youtube\.[a-z][a-z]\/videoplay > \.youtube\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i \.googlevideo\.com\/videoplayback \.googlevideo\.com\/videoplay \.googlevideo\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.com\/videoplayback \.google\.com\/videoplay > \.google\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.[a-z][a-z]\/videoplayback \.google\.[a-z][a-z]\/videoplay > \.google\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i proxy[a-z0-9\-][a-z0-9][a-z0-9][a-z0-9]?\.dailymotion\.com\/ acl videocache_allow_url url_regex -i vid\.akm\.dailymotion\.com\/ acl > videocache_allow_url url_regex -i > [a-z0-9][0-9a-z][0-9a-z]?[0-9a-z]?[0-9a-z]?\.xtube\.com\/(.*)flv acl > videocache_allow_url url_regex -i \.vimeo\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i > va\.wrzuta\.pl\/wa[0-9][0-9][0-9][0-9]? acl videocache_allow_url > url_regex -i \.youporn\.com\/(.*)\.flv acl videocache_allow_url > url_regex -i \.msn\.com\.edgesuite\.net\/(.*)\.flv acl > videocache_allow_url url_regex -i \.tube8\.com\/(.*)\.(flv|3gp) acl > videocache_allow_url url_regex -i \.mais\.uol\.com\.br\/(.*)\.flv acl > videocache_allow_url url_regex -i > \.blip\.tv\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i > \.apniisp\.com\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i \.break\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i redtube\.com\/(.*)\.flv acl > videocache_allow_dom dstdomain .mccont.com .metacafe.com > .cdn.dailymotion.com acl videocache_deny_dom dstdomain > .download.youporn.com .static.blip.tv acl dontrewrite url_regex > redbot\.org \.php acl getmethod method GET > > storeurl_access deny dontrewrite storeurl_access deny !getmethod > storeurl_access deny videocache_deny_dom storeurl_access allow > videocache_allow_url storeurl_access allow videocache_allow_dom > storeurl_access deny all > > storeurl_rewrite_program /etc/squid/storeurl.pl > storeurl_rewrite_children 7 storeurl_rewrite_concurrency 10 > > acl store_rewrite_list urlpath_regex -i > \/(get_video\?|videodownload\?|videoplayback.*id) acl > store_rewrite_list urlpath_regex -i \.flv$ \.mp3$ \.mp4$ \.swf$ \ > storeurl_access allow store_rewrite_list storeurl_access deny all > > refresh_pattern -i \.flv$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.mp3$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.mp4$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.swf$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.gif$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.jpg$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.jpeg$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.exe$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth > > # 1 year = 525600 mins, 1 month = 10080 mins, 1 day = 1440 refresh_pattern (get_video\?|videoplayback\?|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern > (get_video\?|videoplayback\?id|videoplayback.*id|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern \.(ico|video-stats) > 10080 80% 10080 override-expire ignore-reload ignore-no-cache > ignore-private ignore-auth override-lastmod negative-ttl=10080 > refresh_pattern \.etology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern galleries\.video(\?|sz) 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern brazzers\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern \.adtology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern > ^.*(utm\.gif|ads\?|rmxads\.com|ad\.z5x\.net|bh\.contextweb\.com|bstats\.adbrite\.com|a1\.interclick\.com|ad\.trafficmp\.com|ads\.cubics\.com|ad\.xtendmedia\.com|\.googlesyndication\.com|advertising\.com|yieldmanager|game-advertising\.com|pixel\.quantserve\.com|adperium\.com|doubleclick\.net|adserving\.cpxinteractive\.com|syndication\.com|media.fastclick.net).* > 10080 20% 10080 ignore-no-cache ignore-private override-expire > ignore-reload ignore-auth negative-ttl=40320 max-stale=10 > refresh_pattern ^.*safebrowsing.*google 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth negative-ttl=10080 refresh_pattern > ^http://((cbk|mt|khm|mlt)[0-9]?)\.google\.co(m|\.uk) 10080 80% > 10080 override-expire ignore-reload ignore-private negative-ttl=10080 > refresh_pattern ytimg\.com.*\.jpg > 10080 80% 10080 override-expire ignore-reload refresh_pattern > images\.friendster\.com.*\.(png|gif) 10080 80% > 10080 override-expire ignore-reload refresh_pattern garena\.com > 10080 80% 10080 override-expire reload-into-ims refresh_pattern > photobucket.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 override-expire ignore-reload refresh_pattern > vid\.akm\.dailymotion\.com.*\.on2\? 10080 80% > 10080 ignore-no-cache override-expire override-lastmod refresh_pattern > mediafire.com\/images.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 reload-into-ims override-expire ignore-private refresh_pattern > ^http:\/\/images|pics|thumbs[0-9]\. 10080 80% > 10080 reload-into-ims ignore-no-cache ignore-reload override-expire > refresh_pattern ^http:\/\/www.onemanga.com.*\/ > 10080 80% 10080 reload-into-ims ignore-no-cache ignore-reload > override-expire refresh_pattern > ^http://v\.okezone\.com/get_video\/([a-zA-Z0-9]) 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth override-lastmod negative-ttl=10080 > > #images facebook refresh_pattern -i \.facebook.com.*\.(jpg|png|gif) 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern -i \.fbcdn.net.*\.(jpg|gif|png|swf|mp3) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern static\.ak\.fbcdn\.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern ^http:\/\/profile\.ak\.fbcdn.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > > #All File refresh_pattern -i \.(3gp|7z|ace|asx|bin|deb|divx|dvr-ms|ram|rpm|exe|inc|cab|qt) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(rar|jar|gz|tgz|bz2|iso|m1v|m2(v|p)|mo(d|v)|arj|lha|lzh|zip|tar) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(jp(e?g|e|2)|gif|pn[pg]|bm?|tiff?|ico|swf|dat|ad|txt|dll) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(avi|ac4|mp(e?g|a|e|1|2|3|4)|mk(a|v)|ms(i|u|p)|og(x|v|a|g)|rm|r(a|p)m|snd|vob) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(pp(t?x)|s|t)|pdf|rtf|wax|wm(a|v)|wmx|wpl|cb(r|z|t)|xl(s?x)|do(c?x)|flv|x-flv) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims > > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern ^gopher: > 1440 0% 1440 refresh_pattern ^ftp: 10080 95% 10080 > override-lastmod reload-into-ims refresh_pattern . 1440 > 95% 10080 override-lastmod reload-into-ims

    Read the article

  • Lost all data on Windows XP after blue screen

    - by Barb
    I got a blue screen and was trying to boot with my OS disk. Frankly, I was unsure exactly how to do this. I was trying everything and booted in partition mode. Finally, I booted with disk and ran chkdsk /r and was able to log into Windows. But, all of my files and pictures are gone. I have no backup and all I'm sick to think that I lost the last seven years of pictures of my kids. What can I do?

    Read the article

  • Does any know fix/cause of USB drives that lose connection

    - by Burch Kealey
    I have been having significant problems trying to copy files to a USB drive (G0-Flex 1.5 tb) No matter what I use to try to copy the files (python code, Windows copy and paste or Drobo Copy utility) I ultimately get a failure. The failure is always some indication that the device is not ready or able to be written to. I am pretty sure the problem is that the drive is losing its connection. I have done everything I can find so far including setting the USB Root hub to never turn off the power, I updated some usb drivers etc. I have found references to this problem primarily with Win7-64 bit. I have also had USB connection problems with other devices- we kept losing a connection to our Bravo Disc Publisher when we went to Win7 and finally bought a newer model and have not had problems since. Any pointers about diagnosing and or understanding the problem would be appreciated.

    Read the article

  • SquidProxy status:Unknow job :Squid

    - by BanKtsu
    I have an issue in Centos 6.3. I installed Squid from compressed source archives(.tar.gz), I create an /etc/init.d/squid file, that run well because I view with the command ps -aux, that is running: root 2153 0.0 0.0 8920 1536 ? Ss 13:52 0:00 /opt/squid/squid-3.2/sbin/squid squid 2155 0.0 0.0 16368 9224 ? S 13:52 0:00 (squid-1) squid 2157 0.0 0.0 3628 972 ? S 13:52 0:00 (logfile-daemon) /var/log/squidserver/access.log This service boot at start because I configurate it with chkconfig chkconfig --list|grep squid squid 0:off 1:off 2:on 3:on 4:on 5:on 6:off The only issue that i have is when i run the command service--status-all status:Unknown job:squid why is not reconized?, what i missed?

    Read the article

  • Line numbering per paragraph in Word 2007

    - by WaelJ
    How can I use line numbering in Word 2007, but for each paragraph? (By line numbering I mean the one from Page Layout/Setup, not regular list numbering) So something like this: 1 Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. 2 Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat 3 Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat

    Read the article

  • How to multiseat with HW 3d accel on CentOS 6.3 Final?

    - by user35070
    I would like to setup a multiseat configuration on CentOS 6.3 (two video cards, two keyboards, two mice, two monitors) and have hardware accelerated 3D on both monitors. 3D HW acceleration rules out Xephyr. I saw somewhere that recent versions of GDM (3.3 and newer?) don't support multiseat, so do I have to install KDM to make this work? If I just create a duplicate section with new device identifiers in my xorg.conf file, will this 'just work'? Using different ports on the same video card and separate keyboards, mice, and displays, the result was a desktop which spanned both monitors with both keyboards and mice acting as the same input in the GUI. I will power down and put in the new video card and report on the results soon. Both video cards are nvidia. UPDATE after putting in another NVIDIA video card, default behavior (before changing xorg.conf) is that one screen works normally, and both mice and keyboards are connected to it. Changing xorg.conf and the display manager to KDM and following the directions here https://help.ubuntu.com/community/MultiseatX#Ubuntu_10.04_.28Lucid.29 , I have 2 mirrored screens connected to separate video cards, DRI enabled, and 2 mice both connected to the same pointer. Keyboards don't do anything, however, I probably just need to fix a setting in xorg.conf I would still like to get multiseat functionality, eg. separate screens with separate input devices I have verified that the separate X processes are running (see page above) using 'ps aux | grepX [01]'

    Read the article

  • Using ethernet cables?

    - by Farhad Yusufali
    I have an HDTV which supports internet connectivity through an ethernet port or wirelessly (but this requires an additional wireless USB adapter, which I don't have). I also have a blue ray player than supports internet connectivity through an ethernet port or wirelessly (natively - no other devices are needed). I want to connect my TV to the internet but my router is too far away. My blueray player however is already connected wirelessly. If I connected my TV to my Blueray player via ethernet, would my TV be able to connect to the internet? To clarify: Wireless Signal - Blue Ray Player - Ethernet Cable - TV Would this work?

    Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >