Search Results

Search found 84911 results on 3397 pages for 'data access layer'.

Page 276/3397 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

  • Limit access on Apache 2.4 to ldap group

    - by jakobbg
    I've upgraded from Ubuntu 12.04 LTS to 14.04 LTS, and suddenly, my Apache 2.4 (previous: Apache 2.2) now lets everybody in to my virtual host, which is unfortunate :-). What am I doing wrong? Anything with the Order/Allow lines? Any help is greatly appreciated! Here's my current config; <VirtualHost *:443> DavLockDB /etc/apache2/var/DavLock ServerAdmin [email protected] ServerName foo.mydomain.com DocumentRoot /srv/www/foo Include ssl-vhosts.conf <Directory /srv/www/foo> Order allow,deny Allow from all Dav On Options FollowSymLinks Indexes AllowOverride None AuthBasicProvider ldap AuthType Basic AuthName "Domain foo" AuthLDAPURL "ldap://localhost:389/dc=mydomain,dc=com?uid" NONE AuthLDAPBindDN "cn=searchUser, dc=mydomain, dc=com" AuthLDAPBindPassword "ThisIsThePwd" require ldap-group cn=users,dc=mydomain,dc=com <FilesMatch '^\.[Dd][Ss]_[Ss]'> Order allow,deny Deny from all </FilesMatch> <FilesMatch '\.[Dd][Bb]'> Order allow,deny Deny from all </FilesMatch> </Directory> ErrorLog /var/log/apache2/error-foo.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access-foo.log combined </VirtualHost>

    Read the article

  • Setting a subdomain to access home machine with windows remote desktop

    - by ianhales
    I'm trying to remotely connect to home machine through Windows Remote Desktop (amongst other things, but this is currently my primary focus). I can do this fine using my home WAN's static IP (thank god for cable!) with port-forwarding, but I would like to access it from a subdomain of my web-site (e.g. home.mydomain.co.uk). In the cPanel for my hosting account, I've gone into DNS zones and altered the A-record to point to my WAN's IP, which I thought should do the job, but I still cannot connect. When I ping the subdomain, I get my web-host's IP, which I guess is to be expected as I believe the DNS of the host domain is used first, then my server handles the redirection of traffic to the IP in the A-record. Is this the correct idea? Do A-record changes suffer from the same propagation delays as DNS record changes, as I suppose that could explain it? (by the way, this thread confirms my thoughts that setting the A-record should be enough: Hostmonster Subdomain redirected to home server IP: How to ssh into home server using subdomain)

    Read the article

  • Motorola Surfboard SB6121 modem conected to 2WIREi38HG wireless router but there's no internet access

    - by Jessica
    I have just switched to Comcast cable internet from AT&T Uverse and I was hoping to use the 2WIRE wireless router with the new Surfboard modem so I can have wireless access. I messed around with some settings and got it working for my laptop (I'm not terribly well versed in computer stuff; I think it was mostly luck) for about a week. The other day I tried to get online and there was no internet connection. I restarted the equipment with no success and then plugged the modem directly into the laptop. This worked, so I knew there was no outage. I connected the ethernet cord to the router and a second cord to my laptop and that worked, too. But when I tried again just with the wireless the laptop connects to the router, but doesn't recognize it or find an internet connection. I tried to go to http://gateway.2Wire.net to fiddle with the settings, but all I get is a Server Not Found page. I tried to check the ip address but this is really kind of over my head and I get different things checking it while plugged into only the modem vs when I plug into the router. Can anyone help? The frustrating thing is that I had it working for awhile, so I know it can do it!

    Read the article

  • How to access Virtual machine using powershell script

    - by Sheetal
    I want to access the virtual machine using powershell script. For that I used below script, Enter-PSSession -computername sheetal-VDD -credential compose04.com\abc.xyz1 where, sheetal-VDD is hostname of virtual machine compose04.com is the domain name of virtual machine and abc.xyz1 is the username of virtual machine After entering above command , it asks for password. When the password is entered I get below error, Enter-PSSession : Connecting to remote server failed with the following error message : WinRM cannot process the reques t. The following error occured while using Kerberos authentication: There are currently no logon servers available to s ervice the logon request. Possible causes are: -The user name or password specified are invalid. -Kerberos is used when no authentication method and no user name are specified. -Kerberos accepts domain user names, but not local user names. -The Service Principal Name (SPN) for the remote computer name and port does not exist. -The client and remote computers are in different domains and there is no trust between the two domains. After checking for the above issues, try the following: -Check the Event Viewer for events related to authentication. -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or us e HTTPS transport. Note that computers in the TrustedHosts list might not be authenticated. -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 + Enter-PSSession <<<< -computername sheetal-VDD -credential compose04.com\Sheetal.Varpe + CategoryInfo : InvalidArgument: (sheetal-VDD:String) [Enter-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : CreateRemoteRunspaceFailed Can someone help me out in this?

    Read the article

  • OpenLDAP 2.4.23 - Debian 6.0 - Import schema - Insufficient access (50)

    - by Yosifov
    Good day to everybody. I'm trying to add a new schema inside OpenLDAP. But getting an error: ldap_add: Insufficient access (50) root@ldap:/# ldapadd -c -x -D cn=admin,dc=domain,dc=com -W -f /tmp/test.d/cn\=config/cn\=schema/cn\=\{5\}microsoft.ldif root@ldap:/# cat /tmp/test.d/cn\=config/cn\=schema/cn\=\{5\}microsoft.ldif dn: cn=microsoft,cn=schema,cn=config objectClass: olcSchemaConfig cn: microsoft olcAttributeTypes: {0}( 1.2.840.113556.1.4.302 NAME 'sAMAccountType' DESC 'Fss ssully qualified name of distinguished Java class or interface' SYNTAX 1.3.6. 1.4.1.1466.115.121.1.27 SINGLE-VALUE ) olcAttributeTypes: {1}( 1.2.840.113556.1.4.146 NAME 'objectSid' DESC 'Fssssull y qualified name of distinguished Java class or interfaced' SYNTAX 1.3.6.1.4. 1.1466.115.121.1.40 SINGLE-VALUE ) olcAttributeTypes: {2}( 1.2.840.113556.1.4.221 NAME 'sAMAccountName' DESC 'Fds sssully qualified name of distinguished Java class or interfaced' SYNTAX 1.3. 6.1.4.1.1466.115.121.1.15 SINGLE-VALUE ) olcAttributeTypes: {3}( 1.2.840.113556.1.4.1412 NAME 'primaryGroupToken' SYNTA X 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) olcAttributeTypes: {4}( 1.2.840.113556.1.2.102 NAME 'memberOf' SYNTAX 1.3.6.1. 4.1.1466.115.121.1.12 SINGLE-VALUE ) olcAttributeTypes: {5}( 1.2.840.113556.1.4.98 NAME 'primaryGroupID' SYNTAX 1.3 .6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) olcObjectClasses: {0}( 1.2.840.113556.1.5.6 NAME 'securityPrincipal' DESC 'Cso ntainer for a Java object' SUP top AUXILIARY MUST ( objectSid $ sAMAccountNam e ) MAY ( primaryGroupToken $ memberOf $ primaryGroupID ) ) I also tried to add the schema by phpldapadmin, but gain the same error. I'm using the admin user which is specified by default from the begging of the slpad installation. How may I add permissions to this user ? Best wishes

    Read the article

  • RTL8188CE doesn't connect to any wifi access points

    - by Drakmail
    I'm using network manager to connect. Also, tryed iwconfig. Results are same. I even try to connect to open access point — results are same. More information: Drakmail@thinkpad-x220:~$ lspci | grep Network | grep -v Ethernet 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) Drakmail@thinkpad-x220:~$ uname -a Linux thinkpad-x220 3.1.0 #1 SMP PREEMPT Wed Oct 26 02:19:49 UTC 2011 x86_64 Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz GenuineIntel GNU/Linux Drakmail@thinkpad-x220:~$ dmesg | tail -n 10 [ 846.901574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 906.812461] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 966.728810] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1026.639676] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin [ 1030.925574] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin At this moment I try to connect to open wifi ap: [ 1031.252403] wlan0: direct probe to 00:24:8c:55:fa:ed (try 1/3) [ 1031.451943] wlan0: direct probe to 00:24:8c:55:fa:ed (try 2/3) [ 1031.651658] wlan0: direct probe to 00:24:8c:55:fa:ed (try 3/3) [ 1031.851354] wlan0: direct probe to 00:24:8c:55:fa:ed timed out [ 1086.544960] rtl8192c_common: Loading firmware file rtlwifi/rtl8192cfw.bin My distribution: Drakmail@thinkpad-x220:~$ cat /etc/*version AgiliaLinux release 8.0.0 (Sammy) (Something between Slackware and Archlinux). Also, I saw that wifi module to often trying to load a firmware file. Any ideas what it would be?

    Read the article

  • securing communication between 2 Linux servers on local network for ports only they need access to

    - by gkdsp
    I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

    Read the article

  • linux: per-process monitor, every 10 minutes, with history access

    - by Inbar Rose
    I really didn't know a better way to ask my question, hence you get a horribly named question. I will explain what i want to do, maybe that will help you help me. I would like to have my linux machine continuously monitor (every 10 minutes) all the processes on my machine. The information from each process that I require is the name, CPU usage, allocated (virtual) memory, and resident (ram) memory. If these periodic reports were to be looked at, they would look something like this: PROCESS CPU RAM VIRTUAL name1 % MB MB name2 % MB MB ...etc..etc These reports should be stored in such a way that I can access them at a later date by giving a date/time scope (range). For instance, if I want to see the history of my processes from 12:00:00 1.12.12 till 12:00:00 2.12.12 I can - and it should give me the history of the processes for every 10 minutes between those date/time borders. The format of the return is not important, that will be handled by a script anyway and can be modified into anything I need. I have looked into a few things so far, but have not found something that clearly meets my needs. Among the things i searched: sar, free(1), top(1).. and a few other things. It should be a simple issue, i can already see all this information by simply looking at my htop, but i need only a tool that will gather the desired fields for me for each processes every 10 minutes, and then also let me extract slices of that data based on date/time scopes (ranges). note: I have limited experience with linux, so please give detailed information. note2: The desired output will be something like this (after receiving the desired range) CPU USAGE BY PROCESS: proc_nameA 1,2,2,2,2,2...... numbers represent % usage every 10 minutes... proc_nameB 4,3,3,6,1,2...... The same idea with the other information.

    Read the article

  • Best way to restrict access to a folder in Dropbox

    - by Joe S
    I currently run a business with around 10 staff members and we currently use Dropbox Pro 100GB to share all of our files. It works very well and is inexpensive, however, I am taking on a number of new staff and would like to move the more sensitive documents into their own, protected folder. Currently, we all share one Dropbox account, I am aware that Dropbox for teams supports this, but it is far too expensive for us as a small company. I have researched a number of solutions: 1) Set up a new standard Dropbox account just for use by management, which will contain all of the sensitive documents, and join the shared folder of the rest of my team to access the rest of the documents. As i understand it, this is not possible with a free account, as any dropbox shared folder added to your account will use up your quota 2) Set up some sort of TrueCrypt container, and install TrueCrypt on each trusted staff member's machine, and store the documents inside that. Would this be difficult to use? I'd imagine the sync-ing would not work so well as the disk would technically be mounted at the time of use and any changes would be a change to the actual container rather than individual files. I was just wondering if anyone knows a way to do this without the drawbacks outlined above? Thanks!

    Read the article

  • One workstation gets slow access to the server, but others are fast

    - by Mike Hanson
    I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

    Read the article

  • Access denied to EFS encrypted files after PC joins domain

    - by mjmarsh
    I'm experiencing strange behavior with Windows Encrypted File System: I have a machine that is in workgroup mode (not joined to a domain) I encrypt an entire directory structure on the machine (basically a folder and subfolders with data files for my application). My application writes and reads files from the encrypted file hierarchy as a local Windows user (let's call the account 'SecureUser'). This works fine I then join the PC to a domain (Let's call it 'TEST') Afterwards, processes running as the local 'SecureUser' account can't read the files it wrote originally when it was off the domain (What is also strange is that the files are listed as "read only" now and I cannot unset this flag via Windows Explorer or the command line, even though it looks like it succeeds) I then 'un-join' the PC from the domain and everything works again Is there something about changing domain membership on a PC that changes the behavior of EFS so that previously encrypted files cannot be read, even by the originating user? Thanks in advance

    Read the article

  • Hyper-V VM's cannot access Host resources, and vice-versa

    - by Agent
    I have several Hyper-V vm's running on this Win2008 R2 Server box, and up until a reboot of the host server, all the VM's were able to access shared folders on the host. Now, they can't even ping the host server. From what I've seen, I need to setup an Internal only network through Virtual Network Manager in Hyper-V. I set this up, then tried to enable the Microsoft Virtual Network Switch Protocol option in this Internal Only NIC, but I get popups saying: Your current selection will also disable the following features: Microsoft virtual network switch protocol Which is absolutely stupid, considering the protocol is what I'm ticking the checkbox to Enable! As of now, on the host, I have 2 NICs: Physical - This NIC on the host machine does have the MVNS protocol enabled Virtual Network Adapter - Created through Hyper-V Virtual Network Manager as an External type of network. Trying to enable MVNS on this NIC also produces the error above. I've tried enabling Client for Microsoft Networks on the physical NIC for IPv6, but everytime I do that, all the VMs lose Internet connectivity and I cannot RDP into them. Anything else I can try?

    Read the article

  • How to block access to addresses outside network (internet)

    - by devnull
    I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

    Read the article

  • SSH access to VM on windows 8 hyper-v

    - by samw
    I'm currently attending University and prefer a Linux environment to do much of my work, but all I have is a ThinkPad running Windows 8 Pro. Cygwin is nice, but it leaves me missing things like apt-get. My latest solution is to run an Ubuntu 12.04 VM with Windows 8's Client Hyper-V and use Cygwin for SSH access. I've looked everywhere online trying to set this up, but I haven't found much help. I've done this before using VirtualBox, so I figured this would be possible as well. Could anyone provide advice for setting up this environment? I'm completely uninitiated to Linux networking, virtual networking, and... pretty much all networking configuration, so this has been quite a challenge for me. What I've done so far: Created an external virtual switch to my wireless NIC. With this, I could successfully SSH to the VM with the leased IP address. But without a static IP, I would soon get disconnected. Created an internal virtual switch and attempt to "share" my main internet connection. (I was following the description on this page) Thank you all in advance!

    Read the article

  • DomainDataSource DataPager with silverlight 3 DataGrid & .Net RIA Services

    - by Dennis Ward
    I have a simple datagrid example with silverlight 3, and am populating it with the .NET ria services using a DomainDataSource along with a DataPager declaratively (nothing in the code-behind), and am experiencing this problem: The LoadSize is 30, and the Page size is 15, and when the page is loaded, the 1st and 2nd page appear correctly, but when I go beyond the 2nd page, nothing shows up in the grid. This used to work in the silverlight 3 beta with the Mix 2009 preview of .NET Ria services, and I've got a really simple example and have verified that the Service on the web project gets called to load a new batch, but the grid doesn't show any data. Can anyone shed any light as to why grid displays data only for the initial load of data and not subsequent batches from the pager? Here's my xaml: <riaControls:DomainDataSource x:Name="ArtistSource" QueryName="GetArtist" AutoLoad="True" LoadSize="30" PageSize="15"> <riaControls:DomainDataSource.DomainContext> <domain:AdminContext /> </riaControls:DomainDataSource.DomainContext> </riaControls:DomainDataSource> <data:DataGrid Grid.Row="1" x:Name="ArtistDataGrid" ItemsSource="{Binding Data, ElementName=ArtistSource}"> </data:DataGrid> <StackPanel Grid.Row="2"> <data:DataPager Source="{Binding Data, ElementName=ArtistSource}" /> </StackPanel>

    Read the article

  • How to populate Java (web) application with initial data using Spring/JPA/Hibernate

    - by Tuukka Mustonen
    I want to setup my database with initial data programmatically. I want to populate my database for development runs, not for testing runs (it's easy). The product is built on top of Spring and JPA/Hibernate. Developer checks out the project Developer runs command/script to setup database with initial data Developer starts application (server) and begins developing/testing then: Developer runs command/script to flush the database and set it up with new initial data because database structures or the initial data bundle were changed What I want is to setup my environment by required parts in order to call my DAOs and insert new objects into database. I do not want to create initial data sets in raw SQL, XML, take dumps of database or whatever. I want to programmatically create objects and persist them in database as I would in normal application logic. One way to accomplish this would be to start up my application normally and run a special servlet that does the initialization. But is that really the way to go? I would love to execute the initial data setup as Maven task and I don't know how to do that if I take the servlet approach. There is somewhat similar question. I took a quick glance at the suggested DBUnit and Unitils. But they seem to be heavily focused in setting up testing environments, which is not what I want here. DBUnit does initial data population, but only using xml/csv fixtures, which is not what I'm after here. Then, Maven has SQL plugin, but I don't want to handle raw SQL. Maven also has Hibernate plugin, but it seems to help only in Hibernate configuration and table schema creation (not in populating db with data). How to do this?

    Read the article

  • R and version control for the solo data analyst

    - by Jeromy Anglim
    Many data analysts that I respect use version control. For example: http://github.com/hadley/ See comments on http://permut.wordpress.com/2010/04/21/revision-control-statistics-bleg/ However, I'm evaluating whether adopting a version control system such as git would be worthwhile. A brief overview: I'm a social scientist who uses R to analyse data for research publications. I don't currently produce R packages. My R code for a project typically includes a few thousand lines of code for data input, cleaning, manipulation, analyses, and output generation. Publications are typically written using LaTeX. With regards to version control there are many benefits which I have read about, yet they seem to be less relevant to the solo data analyst. Backup: I have a backup system already in place. Forking and rewinding: I've never felt the need to do this, but I can see how it could be useful (e.g., you are preparing multiple journal articles based on the same dataset; you are preparing a report that is updated monthly, etc) Collaboration: Most of the time I am analysing data myself, thus, I woudln't get the collaboration benefits of version control. There are also several potential costs involved with adopting version control: Time to evaluate and learn a version control system A possible increase in complexity over my current file management system However, I still have the feeling that I'm missing something. General guides on version control seem to be addressed more towards computer scientists than data analysts. Thus, specifically in relation to data analysts in circumstances similar to those listed above: Is version control worth the effort? What are the main pros and cons of adopting version control? What is a good strategy for getting started with version control for data analysis with R (e.g., examples, workflow ideas, software, links to guides)?

    Read the article

  • XML Schema Migration

    - by Corwin Joy
    I am working on a project where we need to save data in an XML format. The problem is, over time we expect the format / schema for our data to change. What we want to be able to do is to produce scripts to migrate our data across different schema versions. We distribute our product to thousands of customers so we need to be able to run / apply these scripts at customer sites (so we can't just do the conversions by hand). I think that what we are looking for is some kind of XML data migration tool. In my mind the ideal tool could: Do an "XML diff" of two schema to identify added/deleted/changed nodes. Allow us to specify transformation functions. So, for example, we might add a new element to our schema that is a function of the old elements. (E.g. a new element C where C = A+B, A + B are old elements). So I think I am looking for a kind of XML diff and patch tool which can also apply transformation functions. One tool I am looking at for this is Altova's MapForce . I'm sure others here have had to deal with XML data format migration. How did you handle it? Edit: One point of clarification. The "diff" I plan to do is on the schema or .xsd files. The actual changes will be made to particular data sets that follow a given schema. These data sets will be .xml files. So its a "diff" of the schema to help figure out what changes need to be made to data sets to migrate them from one scheme to another.

    Read the article

  • Enormous data and PHP errors

    - by salamis
    I am currently using the following HighCharts:HighStock:Charts: http://www.highcharts.com/stock/demo/data-grouping in order to display the data returned from the server. We retrieve the data from a MySQL database and is really big. We are storing sensor metrics every 1 second. After a while we got the following error: [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP Fatal error: Allowed memory size of 134217728 bytes exhausted (tried to allocate 4756882 bytes) in C:\\wamp\\www\\admin\\getTrends.php on line 156, referer: http://localhost/admin/trends.php [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://localhost/admin/trends.php [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP 1. {main}() C:\\wamp\\www\\admin\\getTrends.php:0, referer: http://localhost/admin/trends.php [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP 2. getTrendsDataAI() C:\\wamp\\www\\admin\\getTrends.php:33, referer: http://localhost/admin/trends.php [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP 3. printResults() C:\\wamp\\www\\admin\\getTrends.php:102, referer: http://localhost/admin/trends.php [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP 4. createData() C:\\wamp\\www\\admin\\getTrends.php:230, referer: http://localhost/admin/trends.php [Wed Sep 12 00:15:56 2012] [error] [client 127.0.0.1] PHP 5. implode() C:\\wamp\\www\\admin\\getTrends.php:156, referer: http://localhost/admin/trends.php What is the best solution to return this data as JSON object to HighStocks for viewing? And how can we overcome the PHP limitation? Shall we return chunk of data each time? How do they usually present enormous amount of data to the users and creating charts and reports from this data? Another big problem that we need to overcome is that the returned JSON object is enormous. At this point is around 20-30 mbs and it will be much larger in the future. Is it ok to return this data to the user and perform everything client side? Any suggestions or thoughts welcome.

    Read the article

  • How do you remove invalid hexadecimal characters from an XML-based data source prior to constructing

    - by Oppositional
    Is there any easy/general way to clean an XML based data source prior to using it in an XmlReader so that I can gracefully consume XML data that is non-conformant to the hexadecimal character restrictions placed on XML? Note: The solution needs to handle XML data sources that use character encodings other than UTF-8, e.g. by specifying the character encoding at the XML document declaration. Not mangling the character encoding of the source while stripping invalid hexadecimal characters has been a major sticking point. The removal of invalid hexadecimal characters should only remove hexadecimal encoded values, as you can often find href values in data that happens to contains a string that would be a string match for a hexadecimal character. Background: I need to consume an XML-based data source that conforms to a specific format (think Atom or RSS feeds), but want to be able to consume data sources that have been published which contain invalid hexadecimal characters per the XML specification. In .NET if you have a Stream that represents the XML data source, and then attempt to parse it using an XmlReader and/or XPathDocument, an exception is raised due to the inclusion of invalid hexadecimal characters in the XML data. My current attempt to resolve this issue is to parse the Stream as a string and use a regular expression to remove and/or replace the invalid hexadecimal characters, but I am looking for a more performant solution.

    Read the article

  • Working with images (CGImage), exif data, and file icons

    - by Nick
    What I am trying to do (under 10.6).... I have an image (jpeg) that includes an icon in the image file (that is you see an icon based on the image in the file, as opposed to a generic jpeg icon in file open dialogs in a program). I wish to edit the exif metadata, save it back to the image in a new file. Ideally I would like to save this back to an exact copy of the file (i.e. preserving any custom embedded icons created etc.), however, in my hands the icon is lost. My code (some bits removed for ease of reading): // set up source ref I THINK THE PROBLEM IS HERE - NOT GRABBING THE INITIAL DATA CGImageSourceRef source = CGImageSourceCreateWithURL( (CFURLRef) URL,NULL); // snag metadata NSDictionary *metadata = (NSDictionary *) CGImageSourceCopyPropertiesAtIndex(source,0,NULL); // make metadata mutable NSMutableDictionary *metadataAsMutable = [[metadata mutableCopy] autorelease]; // grab exif NSMutableDictionary *EXIFDictionary = [[[metadata objectForKey:(NSString *)kCGImagePropertyExifDictionary] mutableCopy] autorelease]; << edit exif >> // add back edited exif [metadataAsMutable setObject:EXIFDictionary forKey:(NSString *)kCGImagePropertyExifDictionary]; // get source type CFStringRef UTI = CGImageSourceGetType(source); // set up write data NSMutableData *data = [NSMutableData data]; CGImageDestinationRef destination = CGImageDestinationCreateWithData((CFMutableDataRef)data,UTI,1,NULL); //add the image plus modified metadata PROBLEM HERE? NOT ADDING THE ICON CGImageDestinationAddImageFromSource(destination,source,0, (CFDictionaryRef) metadataAsMutable); // write to data BOOL success = NO; success = CGImageDestinationFinalize(destination); // save data to disk [data writeToURL:saveURL atomically:YES]; //cleanup CFRelease(destination); CFRelease(source); I don't know if this is really a question of image handling, file handing, post-save processing (I could use sip), or me just being think (I suspect the last). Nick

    Read the article

  • CAScrollLayer doesn't scroll!

    - by Cliff
    Maybe it's because it's late. Whatever the reason I can't figure out why I'm having trouble with a simple CSScrollLayer example I'm trying. I add a 50 pixel Eclipse icon to a view based project and in my initialize method (called from initWithNibName:bundle:) I have this: -(void) initialize { CAScrollLayer *scrollLayer = [CAScrollLayer layer]; scrollLayer.backgroundColor = [[UIColor blackColor] CGColor]; CGRect bounds = self.view.bounds; scrollLayer.bounds = CGRectMake(0, 0, bounds.size.width, bounds.size.height); scrollLayer.contentsRect = CGRectMake(0, 0, bounds.size.width + 800, bounds.size.height + 800); scrollLayer.borderWidth = 2.5; scrollLayer.borderColor = [[UIColor redColor] CGColor]; scrollLayer.position = CGPointMake(self.view.center.x, self.view.center.y - 20); scrollLayer.scrollMode = kCAScrollBoth; [self.view.layer addSublayer:scrollLayer]; UIImage *image = [UIImage imageNamed:@"eclipse32.gif"]; for(int i=0; i<6; i++) { layer = [CALayer layer]; layer.backgroundColor = [[UIColor blackColor] CGColor]; layer.bounds = CGRectMake(0, 0, 100, 100); layer.contents = (id)[image CGImage]; layer.position = CGPointMake(layer.bounds.size.width * i, self.view.center.y); [scrollLayer addSublayer:layer]; } // [button removeFromSuperview]; // [self.view addSubview:button]; // self.view.userInteractionEnabled = YES; [image release]; } The scroll layer shows, the icon is repeated on the layer I have a border around the edge of the screen. Everything is lovely except I can't scroll the icons. I've tried with/without setting scroll mode. I've tried with a single stretched icon that falls off screen. I've tried everything. What am I doing wrong?

    Read the article

  • What's the fastest way to bulk insert a lot of data in SQL Server (C# client)

    - by Andrew
    I am hitting some performance bottlenecks with my C# client inserting bulk data into a SQL Server 2005 database and I'm looking for ways in which to speed up the process. I am already using the SqlClient.SqlBulkCopy (which is based on TDS) to speed up the data transfer across the wire which helped a lot, but I'm still looking for more. I have a simple table that looks like this: CREATE TABLE [BulkData]( [ContainerId] [int] NOT NULL, [BinId] [smallint] NOT NULL, [Sequence] [smallint] NOT NULL, [ItemId] [int] NOT NULL, [Left] [smallint] NOT NULL, [Top] [smallint] NOT NULL, [Right] [smallint] NOT NULL, [Bottom] [smallint] NOT NULL, CONSTRAINT [PKBulkData] PRIMARY KEY CLUSTERED ( [ContainerIdId] ASC, [BinId] ASC, [Sequence] ASC )) I'm inserting data in chunks that average about 300 rows where ContainerId and BinId are constant in each chunk and the Sequence value is 0-n and the values are pre-sorted based on the primary key. The %Disk time performance counter spends a lot of time at 100% so it is clear that disk IO is the main issue but the speeds I'm getting are several orders of magnitude below a raw file copy. Does it help any if I: Drop the Primary key while I am doing the inserting and recreate it later Do inserts into a temporary table with the same schema and periodically transfer them into the main table to keep the size of the table where insertions are happening small Anything else? -- Based on the responses I have gotten, let me clarify a little bit: Portman: I'm using a clustered index because when the data is all imported I will need to access data sequentially in that order. I don't particularly need the index to be there while importing the data. Is there any advantage to having a nonclustered PK index while doing the inserts as opposed to dropping the constraint entirely for import? Chopeen: The data is being generated remotely on many other machines (my SQL server can only handle about 10 currently, but I would love to be able to add more). It's not practical to run the entire process on the local machine because it would then have to process 50 times as much input data to generate the output. Jason: I am not doing any concurrent queries against the table during the import process, I will try dropping the primary key and see if that helps. ~ Andrew

    Read the article

  • Urgent: Sort HashSet() function data in sequence

    - by vincent low
    i am new to java, the function i like to perform is something like: i will load a series of data from a file, into my hashSet() function. the problem is, i able to enter all the data in sequence, but i cant retrieve it out in sequence base on the account name in the file. any 1 can help to give a comment? below is my code: public Set retrieveHistory(){ Set dataGroup = new HashSet(); try{ File file = new File("C:\\Documents and Settings\\vincent\\My Documents\\NetBeansProjects\\vincenttesting\\src\\vincenttesting\\vincenthistory.txt"); BufferedReader br = new BufferedReader(new FileReader(file)); String data = br.readLine(); while(data != null){ System.out.println("This is all the record:"+data); Customer cust = new Customer(); //break the data based on the , String array[] = data.split(","); cust.setCustomerName(array[0]); cust.setpassword(array[1]); cust.setlocation(array[2]); cust.setday(array[3]); cust.setmonth(array[4]); cust.setyear(array[5]); cust.setAmount(Double.parseDouble(array[6])); cust.settransaction(Double.parseDouble(array[7])); dataGroup.add(cust); //then proced to read next customer. data = br.readLine(); } br.close(); }catch(Exception e){ System.out.println("error" +e); } return dataGroup; } public static void main(String[] args) { FileReadDataModel fr = new FileReadDataModel(); Set customerGroup = fr.retrieveHistory(); System.out.println(e); for(Object obj : customerGroup){ Customer cust = (Customer)obj; System.out.println("Cust name :" +cust.getCustomerName()); System.out.println("Cust amount :" +cust.getAmount()); }

    Read the article

  • How to sort HashSet() function data in sequence?

    - by vincent low
    I am new to Java, the function I would like to perform is to load a series of data from a file, into my hashSet() function. the problem is, I able to enter all the data in sequence, but I can't retrieve it out in sequence base on the account name in the file. Can anyone help? below is my code: public Set retrieveHistory(){ Set dataGroup = new HashSet(); try{ File file = new File("C:\\Documents and Settings\\vincent\\My Documents\\NetBeansProjects\\vincenttesting\\src\\vincenttesting\\vincenthistory.txt"); BufferedReader br = new BufferedReader(new FileReader(file)); String data = br.readLine(); while(data != null){ System.out.println("This is all the record:"+data); Customer cust = new Customer(); //break the data based on the , String array[] = data.split(","); cust.setCustomerName(array[0]); cust.setpassword(array[1]); cust.setlocation(array[2]); cust.setday(array[3]); cust.setmonth(array[4]); cust.setyear(array[5]); cust.setAmount(Double.parseDouble(array[6])); cust.settransaction(Double.parseDouble(array[7])); dataGroup.add(cust); //then proced to read next customer. data = br.readLine(); } br.close(); }catch(Exception e){ System.out.println("error" +e); } return dataGroup; } public static void main(String[] args) { FileReadDataModel fr = new FileReadDataModel(); Set customerGroup = fr.retrieveHistory(); System.out.println(e); for(Object obj : customerGroup){ Customer cust = (Customer)obj; System.out.println("Cust name :" +cust.getCustomerName()); System.out.println("Cust amount :" +cust.getAmount()); }

    Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >