Search Results

Search found 10719 results on 429 pages for 'hardware failure'.

Page 276/429 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• Device cannot be added on software-raid-1 array on Ubuntu 12.04

  - by George Pligor

  Unfortunately all tutorials I have found online until now on how to setup software-raid-1 are outdated on ubuntu 12.40 My target is to setup it on a system with a secondary disk drive that is already running. Format is not an option! I am trying to follow and adapt from 11.10 to 12.04 the following tutorial: http://www.howtoforge.com/how-to-set-up-software-raid1-on-a-running-lvm-system-incl-grub2-configuration-ubuntu-11.10-p2 On the above tutorial there is a successful command which creates a raid-1 array by setting the first disk drive with the installed system as missing: mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/sdb1 But when the time comes to add the first main drive with the installed system on the raid-array with this command: mdadm --add /dev/md0 /dev/sda1 I receive an error message. The error message says that the device /dev/sda is (which makes sense) busy! Note: hardware raid solution is not available since the system is a laptop with two disk drives! Thank you

  Read the article

• QoS / PBR Routing Questions

  - by Bernard

  I have a 50Mbs Satellite link and a 10Mbs Microwave link supplying a very remote location. Behind these links, I have a 6,400 seat network - with about 3,000 signed in at any one time. My goal is to send all of the Voip traffic (Google Chat, Magic Jack, Skype, Speakeasy, Vonage, Vonage PC, Yahoo) through the microwave link which has 100ms latency. The rest of the traffic can utilize any remaining bandwidth of the microwave link with excess being diverted to the higher latency (600ms) satellite connection. The problem I've had so far is that most automatic routing configurations weigh the bandwidth heavily for preference - and I'm only wanting latency considered. Additionally, I don't know if this can even be handled with the routing hardware I have at my disposal (Cisco 3640, 3745, & 3845). Any recommendations (or really good starting points) would be greatly appreciated.

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• Keyboard automatically disconnects and reconnects

  - by Algorithms

  The problem i am facing is the keyboard (USB) automatically disconnects when there is a fluctuation in the power supply to the speaker. The speaker and the pc both draw power from a apc ups. The fluctuation occurs because the speaker plug is not tightly connected to the ups power outlet. It is okay for normal work, but a accidental jerk causes the fluctuation. However after some amount of time (usually within 5 seconds) the keyboard automatically reconnects and windows plays the sound of hardware connected. This problem will also occur if I manually take out the speaker power cable from the ups power outlet. My question is whether the problem I am facing is due to electrical issues, or due to software problems. PC config: OS : Windows 7 Ultimate UPS : APC 600 VA PSU : Corsair TX 650 Speaker : Realtek

  Read the article

• Why is this LTO4 Tape-drive not working

  - by Tim Haegele

  # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

  Read the article

• Installing Windows Server 2003 on AMD environment

  - by santhosh kumar

  Hi all, Our organisation we have 25 computers and we are trying to setup Windows Server 2003. We are planning to configure Active Directory NAT DNS server Visual Studio Team Foundation Server Subversion (SVN) Trac (Bug tracking tool) FTP server And our Hardware configuration is AMD Athlon 64 X2 Dual (Core processor 5600+, 2.60 GHz) Asus motherboard (M2N series) Transcend 4 GB RAM (800 MHz) 500 GB Hard Disk (RAID enabled) But my colleague is advising me AMD won't suite for servers platforms, and use Intel environment. Also they telling we can't install all the services to one server. I got confusion what to do?... Is really can`t install above services to AMD computer? Thanks...

  Read the article

• Server Security

  - by mahatmanich

  I want to run my own root server (directly accessible from the web without a hardware firewall) with debian lenny, apache2, php5, mysql, postfix MTA, sftp (based on ssh) and maybe dns server. What measures/software would you recomend, and why, to secure this server down and minimalize the attack vector? Webapplications aside ... This is what I have so far: iptables (for gen. packet filtering) fail2ban (brute force attack defense) ssh (chang default, port disable root access) modsecurity - is really clumsy and a pain (any alternative here?) ?Sudo why should I use it? what is the advantage to normal user handling thinking about greensql for mysql www.greensql.net is tripwire worth looking at? snort? What am I missing? What is hot and what is not? Best practices? I like "KISS" - Keep it simple secure, I know it would be nice! Thanks in advance ...

  Read the article

• WD My Passport Essential SmartWare External Hard Drive

  - by Acer

  Hi Ive been gifted a My Passport SmartWare External Hard Drive(500gb). I used it and it works fine and installed WDSmartWare The Second time i used it,still fine,but I took it out without using the "Safely Remove Hardware" So the third time I used it,there's a bubble come out that says: USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.For assistance in solving the problem, click this message. I tried connecting it to other USB Ports but it didn't work I tried Uninstalling WDSmarWare and connect it but it didn't work Please help me I like this hard drive so much and I spoilt it easily XD P.S I think about 13% has been used up in the Hard Drive P.S.S Other USBs can work fine in the computer P.S.S.S I tried connecting it to other computer and works fine OMG

  Read the article

• Backup strategy for Windows Server 2008 R2 and Hyper-V

  - by winserveradmin

  I am in the process of planning a Hyper-V deployment with SCVMM 2008 R2. I have several VMs on VMWare Player (temporary solution) for stuff like Sharepoint 2007, 2010, and a couple of other server apps. I want to develop a resilient backup plan for this. On the software side, Data Protection Manager 2010 will support all of the server apps I run (sQL Server 2008 R2, Sharepoint, Exchange, etc). But on the hardware side (storage), what is the best way to go? Drobo seems to have issues with Hyper-V juding by a few threads on here and doesn't support DPM 2010 (which is in beta anyway) but not even the 2007 version (see http://www.drobo.com/support/best_practices.php). What storage device would work well? Do I need a home server or just an external usb drive? Capacity wise, 2tb will probably be best so I can have a small archive and implement a round-robin system. Thanks

  Read the article

• WHEA_UNCORRECTABLE_ERROR BSOD - what is wrong?

  - by Arcane

  Hello I have a problem with my PC getting the WHEA_UNCORRECTABLE_ERROR bsod. It is a few months old pc. I am not overclocking or changing anything in bios, but sometimes (this is my third time) I get this bsod out of nowhere. This last time I was just watching some stream on twitch when the pc suddenly crashed. I have everything up to date in windows update and every other driver as well. Everything in Open hardware Monitor seems ok. Right now as of 10 min after the crash, the CPU temp is at 38°C, fans are at 1400RPM I am using Windows 8.1 Pro 64b. Here are my spec: Intel i5-4570 CPU @ 3.20GHz, Kingston HyperX 8GB DDR3 1600 XMP, GeForce GTX 660 with 340.52 drivers, Corsair VS450 power supply, Gigabyte GA-H87-HD3 you can see the BSOD dump here: https://www.dropbox.com/s/88i1q2nnqnpzux1/082514-29656-01.dmp?dl=0 Can anybody tell me what is wrong?

  Read the article

• Primary domain controller has crashed, secondary does not log in

  - by Hosm

  Hi everybody, I had a primary domain controller on machine A and a secondary one on machine B in my AD domain. Due to some hardware/software problems, I decided to migrate the role of primary domain controller to machine B. Unfortunately, machine A has totally crashed and does not boot. Now I can not even log in to machine B (which itself was a controller in the domain). I need to log into machine B then choose it as the primary controller. I already have synced DNS and AD info. when machine A was alive. Anyone can provide an idea?

  Read the article

• Cross platform support for network attached USB hubs?

  - by larsks

  I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

  Read the article

• Horizontal scrolling not working in Windows 7 running on MBP using Boot Camp

  - by Rubicon

  Is there a way to enable horizontal scrolling on Windows installed on a bootcamp partition of MBP 13" Core 2 Duo, using a trackpad? I had a look into the Boot Camp Control panel settings, but could not find a setting that suggested this. I used the Boot Camp drivers that came with the MBP in the Mac OS X Install disk. The vertical scroll is working fine, and the horizontal scroll works fine in the Mac world of things, so the hardware is fine. I think maybe there might be an additional install for a driver that we may have to install? Or any update? Thanks in advance for all your help. :)

  Read the article

• I'm confuse about these 2 statements about performance of 32 bit application on 64 bit Windows 7....

  - by metal gear solid

  Running some 32 bit applications on a 64 bit OS could actually be slower. The additional overheads in running 32 bit software in 64 bit mode could cause a slight degradation in performance. It will take some time for 64 bit software to become the norm. Source: http://www.w7forums.com/windows-7-64-bit-vs-32-bit-t484.html That depends. If you're working with large files or running applications that consume a great deal of memory, then 64-bit Windows will typically give you a slight performance advantage over 32-bit Windows running on identical hardware. This is true even when using 32-bit applications. Source: http://www.infoworld.com/d/windows/32-bit-windows-7-or-64-bit-windows-7-145?page=0,3 Which is true? If i go for 64 bit Windows 7 then will i feel more performance (Compare to 32 bit windows 7) of 3 years back purchased Adobe photoshop (I think it would be a 32 bit application) and some of other 32 bit applications ?

  Read the article

• Inexpensive and Open replacement for Cisco Tunnel-based EasyVPN with Cisco VPN 3000 Series

  - by Shoaibi

  I have a scenario when i have to establish peer-to-peer preshared key based VPN to a vendor. This vendor uses Cisco EasyVPN with Cisco VPN 3000 as access concentrator. I check the compatibility of the type of VPN from http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps7180/prod_brochure0900aecd80582078.pdf and it appears that it would only work on cisco hardware. I am looking for a less inexpensive and possibly and open replacement to this to save my cost and also recommend to them. I have tried OpenVPN and thinking about vyatta.

  Read the article

• MySQL 5.5 on Windows server is horribly slow

  - by Brad

  I have had no luck getting MySQL 5.5 to be as fast as 5.1 or MariaDB on the exact same hardware/database/environment under Windows server 2003R2 or 2008R2. My benchmarks from our application: MySQL 5.5 + CentOS 5.2 (XenServer Virtual) = 28 seconds (box is "busy" not buried) MariaDB (5.1) + Windows 2003 (Physical box) = 130 seconds (box is 2% busy) MySQL 5.1 + Windows 2003 (Physical box) = 170 seconds (box is 2% busy) MySQL 5.5 + Windows 2003 (Physical box) = 305 seconds (As high as 600 seconds...) (box is 2% busy) The only difference between these runs is the removal of skip-locking and the running of mysql_upgrade.exe to update some tables for stored procs on 5.5. Yes, I know it's a release candidate, I'm feeding that back to MySQL as well. No slow queries are logged, it doesn't think it's being slow, it just is. I'm going to start tearing into the queries themselves to see if the INSERT/SELECT plans have gone buggo on 5.5. Any help would be appreciated! Thanks

  Read the article

• Patch Management and System Inventory on a Windows network?

  - by Scott

  What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

  Read the article

• IPSEC Windows 2008 <--> Fortinet 60B

  - by Elijah Glover

  I am trying to establish a IPSEC vpn, between an office DSL connection and a single virtual machine. I have done hub-spoke stuff before with cisco and fortinet routers, never hardware <-- software. Fortigate 60B - 10.20.1.1/24 Windows Server 2008 r2 Installed On VM I have seen some guides, to do this with juniper screenos (guide uses first release of 2008, they introduced windows firewall with advanced security), but none using fortinet equipment. Anyone ever been successful? Or should I install RAS/PPTP, so I can dial in?

  Read the article

• Wireshark (WinPCap) does not see Intel X520-DA2 10 GbE NIC teaming intermittently

  - by GregC

  I am running a team of two 10 GigE ports on Intel X520-DA2 network card. They work well in tandem and achieve the desired throughput. However, I see an intermittent issue whereby WireShark and my own application (using WinPCap) only show the underlying ports, failing to recognize the team adapter. Details: Intel 17.4 NIC drivers on Windows Server 2008 R2 with all patches. HP DL370 G6 server. RSS enabled on Intel both underlying Intel NICs. The exact error: Unable to open the adapter (rpcap://\Device\NPF_{401D5903-16E7-41DC-8484-5D96765B9692}). failed to set hardware filter to promiscuous mode

  Read the article

• Speedup vmware esx guest hdd access

  - by Uwe

  Hello, we run several windows servers and windows clients on our vmware esx. One of the Windows 2003 Servers is a build-server with major HDD-reads/writes. as it is our build server. This machine was a hardware before and was virtualized to the ESX. Is there any way to increase the HDD-Performance? Perhaps there are special windows (guest) drivers? The files are stored on a Raid6 base. Performance graph of vmware infrastructure client shows reads up to 650 KBps and writes up to 4000 KBps. Thank you. Regards, Uwe

  Read the article

• Do Seagate Momentus XT SSD Hybrid drives perform better than a good hard drive + flash on ReadyBoost

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. At a glance, this looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

• AutoCAD 11 and network file shares

  - by gravyface

  Small network of perhaps half a dozen engineers, currently working on local copies of AutoCAD project files, which are then copied back up to file server (2008 Standard, 1-2 year old Dell server hardware, RAID 5 SAS disks (10k? not positive)) at end of day. To me, this sounds horribly inefficient and error-prone, however, I've been told that "AutoCAD and network files = bad idea" and this is gospel. The network is currently 10/100 (perhaps this is the reason for the "gospel") but all the workstations are within 2 years old and have GbE NICs so an upgrade of the core switch is long overdue. However, I know certain applications don't like network access, at all, and any sign of latency or disruption brings the whole thing crashing down. Anyone care to chime in?

  Read the article

• Can't download updates for reinstalled Office 2000 on WinXP OS "expected version not found" error message

  - by mpmadigan

  I replaced HD and reinstalled WinXP Pro and successfully downloaded all of the service packs and security updates. I've reinstalled my licensed version of Office 2000 (upgrade version from Office 97). The software installs and is functional; but when trying to install updates SR-1 or SR-1a or any individual security update I get error message "expected version of product not found". Microsoft no longer provides support for this legacy version of office. I can't find any support documents in Microsoft's database that addresses this issue. This is my sister's computer and I've already come out-of-pocket $100 for hardware (not counting the $$hours of labor). She only uses MS Word for minimal correspondence. No desire to spend $100+ for new version of Office. I would greatly appreciate any suggested fixes for this problem.

  Read the article

• 3 monitors + a TV on a single card with Eyefinity?

  - by Paul Accisano

  Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

  Read the article

• No "Terminal Services" branch in "Group Policy Object Editor"

  - by ayavilevich

  Hi, We have several identical several servers in a hosting company. They run Windows 2003 R2 Std SP2 64bit. The servers are not in a domain. We have recently received a new server with the same configuration and hardware. However, the new server is different in some way. When we run "gpedit.msc /s" there are much less options in the tree than the other servers. Specifically we are missing the configuration of "Terminal Services". Many other items are missing under "Administrative templates" and "Windows components". Screenshot of correct server: (can't post link due to SF policy) Screenshot of new server: http://img686.imageshack.us/img686/572/gpowindowscomponentstp5.png What should we try? Thanks, Arik.

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >