Search Results

Search found 27336 results on 1094 pages for 'network state'.

Page 276/1094 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

  • How is virtual machine port opening works

    - by Xianlin
    I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

    Read the article

  • Networking problems in VMWare with wireless bridge

    - by Robert Koritnik
    Barebone data: virtualization: VMWare Workstation 6.5 (latest) Host: Windows Server 2008 x64 Guest: Windows Server 2008 x86 Host network adapter: wireless Guest network adapter 1: over Bridge VMNet (automatic) Guest network adapter 2: over Host only VMNet Problem When I surf the net within VM my internet connection just gets stalled (not dropped). It doesn't experience any timeout whatsoever, it just stops downloading/communicating. For instance: I start downloading a file with a browser (IE/FF/CR doesn't matter) and I have to pause/restart download when speed drops to 0. I could wait indefinitelly but connection won't pickup automatically. What did I miss in my network configuration? Update 1 I've tested this in various combinations. This works fine when host is connected via Ethernet. But when connected via Wifi, the connection on the guest works as previously described. It connects fine. It gets a valid IP from DHCP... Everything is cool as long as you don't start doing some intensive network traffic (ie. download a 2MB file) In this case it starts downloading and stops after a while. Speed just drops to 0B/s... Sometimes it picks up back, sometimes it doesn't. Connection still stays and works. I can ping around with no problem.

    Read the article

  • Smart card authentication to a Cisco switch?

    - by murisonc
    We have our Cisco network devices configured to authenticate network administrators using their domain accounts via RADIUS running on a Windows 2008R2 server with the network protection role. This works great for logging into the switch via SSH when configuring the devices. We are now in the beginning stages of deploying smart cards for logins. Does anyone know of a way to login to a Cisco switch using a smart card instead of a domain username and password? The SSH client we are using is Putty. Workstations are Windows 7. RADIUS is running on Windows 2008R2. We are running our own certificate authority on Windows 2008; network is not connected to the Internet. We prefer to not have to purchase additional proprietary devices for this functionality.

    Read the article

  • Change the order of DNS lookup when connected in the VPN

    - by qwerty2010
    Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

    Read the article

  • Kickstarting VMWare ESX 4.1 (Error: No NIC with name bootif)

    - by William
    I'm having an issue kickstarting an installation of VMWaare ESX Classic 4.1. I've stripped down my kickstart a bit to just: accepteula keyboard us auth clearpart --firstdisk --overwritevmfs url --url=10.16.0.1/cblr/ks_mirror/esx-classic-4.1.0-260247 rootpw --iscrypted $1$zZJa3g7g$mD8d.6QgbPku1QovQTAps/ timezone 'US/Pacific' network --addvmportgroup=true --device=vmnic0 --bootproto=dhcp part '/boot' --fstype=ext3 --size=1100 --onfirstdisk part 'none' --fstype=vmkcore --size=110 --onfirstdisk part 'datastore1' --fstype=vmfs3 --size=8920 --grow --onfirstdisk virtualdisk 'esxconsole' --size=7920 --onvmfs='datastore1' part 'swap' --fstype=swap --size=916 --onvirtualdisk='esxconsole' part '/var/log' --fstype=ext3 --size=2000 --onvirtualdisk='esxconsole' part '/' --fstype=ext3 --size=5000 --grow --onvirtualdisk='esxconsole' %post --interpreter=bash However, when I attempt to use this kickstart during a PXE install with no additional kernel options, I get the following error: There was a problem with the Network Device specified on the command line. Error: No NIC found with name bootif If I comment out the network line in the kickstart, the error changes to: There was a problem with the Network Device specified on the command line. Error: No NIC found with name eth0 How can I fix this? Thanks.

    Read the article

  • OSU Marching Band Delivers Impressive Half-Time Tribute to Video Games

    - by Jason Fitzpatrick
    This Saturday, during the Ohio State-Nebraska game halftime, the Ohio State University marching band paid tribute to decades of popular video games in an impressively choreographed 10 minute show. The video starts off a little shaky, but once the crowd settles down to watch the show things get significantly smoother. How many of the games do you recognize? [via Reddit] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • Creating virtual switch in VMware

    - by MJI
    We are trying to add a network using vsphere client for VMkernel port while creating a virtual switch. But it prompts us a red cross between the physical adapter and VMkernel port. We did test all the network cables and the network adapters. We tried creating virtual switch for service console but no gains. We have used NIC's which are VMware certified. I have even tried to update bios to check the hardware compatibility but didn't work.

    Read the article

  • Why wireless adatper stop to work?

    - by AndreaNobili
    today I correctly installed the driver for the TP-LINK TL-WN725N USB wireless adapter on my RaspBerry Pi (I use RaspBian that is a Debian), then I setted up the wifi using the wpa-supplicant as explained in this tutorial: http://www.maketecheasier.com/setup-wifi-on-raspberry-pi/ This worked fine untill this evening. Then suddenly it stopped to work when I try to connect in SSH and the Raspberry is on the wireless (or rather it should be, as this is not in the list of my router's DHCP connected Client) The strange thing is that the USB wirless adapter blink so I think that this is not a driver problem. If I try to connect it by the ethernet I have no problem. It appear in my router's DHCP connected Client and I can connect to it by SSH. When I connect to it using ethernet if I perform an ifconfig command I obtain: pi@raspberrypi ~ $ ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:2a:9f:b0 inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:59 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6006 (5.8 KiB) TX bytes:8268 (8.0 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1104 (1.0 KiB) TX bytes:1104 (1.0 KiB) wlan0 Link encap:Ethernet HWaddr e8:94:f6:19:80:4c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) So it seems that the wlan0 USB wireless adapter driver is correctly loaded. If I remove the USB wireless adapter and put it again into the USB port, the lasts lines of dmesg log is: [ 20.303172] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 20.306340] RTL871X: set bssid:00:00:00:00:00:00 [ 20.306726] RTL871X: set ssid [g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9aD\xffffffa7\x1a\xffffffa0\x1a\xffffff8b] fw_state=0x00000008 [ 21.614585] RTL871X: indicate disassoc [ 21.908495] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.006282] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS [ 26.247997] RTL871X: nolinked power save enter As you can see some of these line are related to the RTL871X that is my USB wireless adapter, but I don't know is that these line report an error or if it is all ok. Looking at the adapter status I obtain: pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff As you can see the mode is DORMANT but I think that this is normal because now I am connected using ethernet. I tryied to set up the adapter but it seems that I obtain no result, infact: pi@raspberrypi ~ $ sudo ip link set dev wlan0 up pi@raspberrypi ~ $ ip link list dev wlan0 3: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DORMANT qlen 1000 link/ether e8:94:f6:19:80:4c brd ff:ff:ff:ff:ff:ff pi@raspberrypi ~ $ sudo ip link set dev wlan0 up This is my /etc/network/interfaces file content and it is ok: auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 iface wlan0 inet manual wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf iface default inet dhcp and it is the /etc/wpa_supplicant/wpa_supplicant.conf that I think is ok (I did not change it compared to when it worked): ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="MY-NETWORK" psk="mypassword" key_mgmt=WPA-PSK } and infact if I execute a network scan I correctly find MY-NETWORK in the network list,infact: pi@raspberrypi ~ $ sudo iwlist wlan0 scan | grep ESSID ESSID:"TeleTu_74888B0060AD" ESSID:"MY-NETWORK" ESSID:"FASTWEB-1-PT6NtjL4TOSe" ESSID:"DC" So I reboot the system and I remove the ethernet cable but when I try to connect again to my raspberry I obatin the following error message: andrea@andrea-virtual-machine:~$ sudo ssh [email protected] ssh: connect to host 192.168.1.9 port 22: No route to host It seems that it can't connect using wireless. What could be the problem? What am I missing? How can I solve this situation? Tnx

    Read the article

  • The power of explicit social networks

    - by me
    Last week I had the pleasure to write a guest post on the Oracle WebCenter blog  with the topic The Power of Social Recommendations where I described Implicit and Explicit Social Recommendations models and how they relate to a Social Engagement Strategy. Now let's look at a real live example. Apple has implemented an explicit Social Network model with So what ? Users do this already on Facebook and Twitter!  (see ZDNet blog post : Ping: Apple should leave social to Facebook, Twitter) BUT there are some major  advantages: "100 % control over the explicit Social Network ->  direct customer relationship without a social intermediary like Facebook or Twitter Total  access to the Social Graph ->  own the Social Graph data from their users and no need to "buy" it from external social network providers Integrated into the core business model ->  harvest all Social Graph data  to provide  highly personalized and trusted recommendations Isn't this the dream of any company which thinks about their social media strategy?  and guess what - Oracle Social Network is all about this - building explicit Social Networks with seamless integration into  your core business processes and applications follow me on twitter:  http://twitter.com/peterreiser Enterprise2.0, enterprise2.0, social networks, social media, apple

    Read the article

  • second ip address on the same interface but on a different subnet

    - by fptstl
    Is it possible in CentOS 5.7 64bit to have a second IP address on one interface (eg. eth0) - alias interface configuration - in a different subnet? Here is the original config for eth0 more etc/sysconfig/network-scripts/ifcfg-eth0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0 BOOTPROTO=static BROADCAST=192.168.91.255 HWADDR=00:1D:09:FE:DA:04 IPADDR=192.168.91.250 NETMASK=255.255.255.0 NETWORK=192.168.91.0 ONBOOT=yes And here is the config for eth0:0 more etc/sysconfig/network-scripts/ifcfg-eth0:0 # Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express DEVICE=eth0:0 BOOTPROTO=static BROADCAST=10.10.191.255 DNS1=10.10.15.161 DNS2=10.10.18.36 GATEWAY=10.10.191.254 HWADDR=00:1D:09:FE:DA:04 IPADDR=10.10.191.210 NETMASK=255.255.255.0 NETWORK=10.39.191.0 ONPARENT=yes How would the resolv.conf file should change since there are two different gateways? Any other change needed?

    Read the article

  • ADDS: 1 - Introducing and designing

    - by marc dekeyser
    Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} What is ADDS?  Every Microsoft oriented infrastructure in today's enterprises will depend largely on the active directory version built by Microsoft. It is the foundation stone on which all other products (Exchange, update services, office communicator, the system center family, etc) rely on to get their information. And that is just looking at it from an infrastructure perspective. A well designed and implemented Active Directory implementation makes life for IT personnel and user alike a lot easier. Centralised management and the abilities opened up  by having it in place are ample.  But what is Active Directory Domain Services? We can look at ADDS as a centralised directory containing all objects your infrastructure runs on in one way or another. Since it is a Microsoft product you'll obviously not be seeing linux or mac clients listed in here (exceptions exist) but in general we can say it contains everything your company has in place in one form or another.  The domain name services. The domain naming service (or DNS for short) is a service which translates IP address (the identifiers for each computer in your domain) into readable and easy to understand names. This service is a prequisite for ADDA to work and having wrong record in a DNS server will make any ADDS service fail. Generally speaking a DNS service will be run on the same server as the ADDS service but it is worth wile to remember that this is not necessary. You could, for example, run your DNS services on a linux box (which would need special preparing to host an ADDS integrated DNS zone) and run the ADDS service of another box… Where to start? If the aim is to put in place a first time implementation of ADDS in your enterprise there are plenty of things to consider depending on what you are going to do in the long run. Great care has to be taken when first designing and implementing as having it set up wrong will cause a headache down the line. It is for that reason that I like to start building from the bottom up and start with a generic installation of ADDS (which will still differ for every client) and make it adaptable for future services which can hook in to the existing environment. Adapting existing environments is out of scope for this document (and series) although it is possible to take the pointers and change your existing environment to run in a smoother manor. Take great care when changing things as one small slip of the hand can give you a forest wide failure… Whenever starting with an ADDS deployment I ask the client the following questions:  What are your long term plans and goals?  How flexible do you want it? Are you currently linux heavy and want to keep this or can we go for an all Microsoft design? Those three questions should give some sort of indicator what direction can be taken and if the client has thought about some things themselves :).  The technical side of things  What is next to consider is what kind of infrastructure is already in place. For these series I'll keep it simple and introduce some general concepts without going in to depth on integrating ADDS with other DNS services.  Building from the ground up means we need to consider our layers on which our infrastructure will rely. In my view that goes as follows:  Network (WAN/LAN links and physical sites DNS Namespacing All in one domain or split up in different domains/forests? Security (both for ADDS and physical sites) The network side of things  Looking at how the network is currently set up can potentially teach us a large deal about the client. Do they have multiple physical site? What network speeds exist between these sites, etc… Depending on this information we will design our site links (which controls replication) in future stages. DNS Namespacing Maybe the single most intresting thing to know is what the domain will be named (ADDS will need a DNS domain with the same name) and where this will be hosted. Note that active directory can be set up with a singe name (aka contoso instead of contoso.com) but it is highly recommended to never do this. If you do end up with a domain like that for some reason there will be a lot of services that are going to give you good grief in the future (exchange being one of them). So one of the best practises would be always to use a double name (contoso.com or contoso.lan for example). Internal namespace A single namespace is just what it sounds like. You have a DNS domain which is different internally from what the client has as an external namespace. f.e. contoso.com as an external name (out on the internet) and contoso.lan on the internal network. his setup is has its advantages in that you have more obscurity from the internet in the DNS side of this but it will require additional work to publish services to the web. External namespace Quite like the internal namespace only here you do not differ the internal namespace of the company from what is known on the internet. In this implementation you would host your own DNS servers for the external domain inside the network. Or in other words, any external computer doing a DNS lookup would contact your internal DNS server for the resolution. Generally speaking this set up is a bad idea from the security side of things. Split DNS Whilst using an external namespace design is fairly easy it involves a lot of security risks. Opening up you ADDS DSN servers for lookups exposes your entire network to the internet and should be avoided at any cost. And that is where the "split DNS" design comes in. In this setup up would still have the same namespace internally and externally but you would be using different DNS servers for lookups on the external network who have no records of your internal resources unless you explicitly publish them. All in one or not? In determining your active directory design you can look at the following possibilities:  Single forest, Single domain Single forest, multiple domains Multiple forests, multiple domains I've listed the possibilities for design in increasing order of administrative magnitude. Microsoft recommends trying to use a single forest, single domain in as much situations as possible. It is, however, always possible that you require your services to be seperated from your users in a resource forest with trusts set up between the different forests. To start out I would go with the single forest design to avoid complexity unless there are strict requirements to have multiple forests. Security What kind of security is required on the domain and does this reflect the physical security on the sites? Not every client can afford to have a domain controller in a secluded server room on every site and it is exactly for that reason that Microsoft introduced the RODC (read only domain controller). A RODC is a domain controller that has been limited in functionality, in essence it will only cache the data you explicitly tell it to cache and in the case of a DC compromise (it being stolen) only a limited number of accounts will need to be affected. Th- Th- Th- That’s all folks! Well at least for now! In future editions of this series we’ll be walking through the different task that need to be done and the thought which needs to be put in to it. But for all editions we’ll be going from the concept of running a single forest, single domain with a split DNS setup… See you next time!

    Read the article

  • How to disable Tcp/Ip settings in windows 7 via GPO?

    - by Akash Kava
    I have enabled following policies, "Prohibit TCP/IP advanced connection" "Prohibit access to properties of components of a LAN connection" "Enable Windows 2000 Network Connections setings for Administrators" after doing all these, all machines running windows xp, 2000 and vista have network settings properties button disabled as expected. However all machines running windows 7 have no effect, I believe there are few more steps, all Windows 7 machines are on domain and we want to control this via Domain Controler's GPO. Please let me know, what I need to do to have Windows 7 disable the properties of network connection, I am not network expert, I read few articles about what new has been added in GPO of windows 7 but I am blank. Everything works fine on Windows XP, Vista, 2003 Server. Only Windows 7 is a problem.

    Read the article

  • 802.11N Windows XP Clients Unable to See Each Other

    - by zippy_raggle
    I am attempting to update my wireless network from 802.11g to 802.11n. When connected to the 'G' access point, the client laptops (there are 7 running Windows XP) are able to connect and browse the network for each other. When I connect them to the 'N' access point they can see the access point, but not the rest of the network. I tried swapping out the access point with a wireless router, but this did not change anything. I verified in both the AP and the router that isolation was turned off. Searching the web has not turned up any other ideas. The manuals don't show anything either. Why can't my wireless client nodes see each other on the 'N' network?

    Read the article

  • Configure an Azure VM for Dynamic DNS for Cloud Services

    - by Adam
    I am trying to setup an azure VM with proper DNS to allow multiple cloud services to communicate across cloud service boundaries. As I understand it, I need to provide my own DNS server. I do not have any on-premise infrastructure, so I am trying to configure an Azure VM to act as my DNS. This SO question (http://stackoverflow.com/questions/21858926/azure-how-to-connect-one-cloud-service-with-other-in-one-virtual-network) is very similar to my setup. This article (http://msdn.microsoft.com/en-us/library/windowsazure/jj156088.aspx) describes my particular case: Name resolution between virtual machines and role instances located in the same virtual network, but different cloud services Here is what I have done: Created Azure Virtual Network and declared subnets for each of my cloud services. Created an Azure VM (Windows 2012 R2) with DNS enabled RDP to the VM and enabled the DNS role and installed features Added the appropriate NetworkConfiguration xml section to each of my cloud services .csfg files Re-deployed my cloud services I have verified that I setup the virtual network and networkconfiguration properly because my cloud service hosts are able to communicate with each other if I use the internal ips. However, name resolution doesn't appear to be working, and it doesn't appear that my cloud service roles can communicate with my DNS server. How do I configure my VM so that my different cloud services roles register themselves with my DNS server? EDIT: I think I am 1 step closer to getting this to work. The cloud services that I was using are in an old affinity group which is not supported by VMs, so I was unable to add my VM into my virtual network. I created a new VNET in a new affinity group with my VM added into it. However, I still don't know how to configure the azure VM's DNS server so that the cloud services register themselves for name resolution. Also, an added bonus guaranteed to get a +1 would be to explain if it is possible to register a DNS entry for the VIP for an internal endpoint of my cloud services so we can get load balancing. Thanks!

    Read the article

  • OpenVPN, Server 12.04, connect to machines in home LAN behind VPN server

    - by inexion
    Problem: I've set up a working OpenVPN server, and am able to connect to it from anywhere using my mac laptop and tunnelblick. When I connect in, I'm assigned an IP address of 10.8.0.x, the server is 10.8.0.1, so I have no problems SSHing into it. Once SSHd in, I can even ping other machines (obviously) on my home network (192.168.1.x). Desired outcome: What I want, is, to connect to the VPN server, and instead of getting a 10.8.0.x address, I get a 192.168.1.x on my home network. I can't figure out how to talk to the OTHER machines on my home network WITHOUT being SSHd in to the VPN server. I'd like to just connect to my VPN server, then be a part of my home network. Attempted solutions: I've read that I need to set up routes, and/or enable IP forwarding. I enabled IP forwarding using sudo sysctl -w net.ipv4.ip_forward=1 and that doesn't seem to have done anything. I've also uncommented a line in the OpenVPN's server.conf file: # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 192.168.1.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" But still no luck, I still get a 10.8.0.x address... I've also read I may have to add routes to the router itself, but haven't tried that. Any help appreciated, thanks!

    Read the article

  • Cisco ASA - Enable communication between same security level

    - by Conor
    I have recently inherited a network with a Cisco ASA (running version 8.2). I am trying to configure it to allow communication between two interfaces configured with the same security level (DMZ-DMZ) "same-security-traffic permit inter-interface" has been set, but hosts are unable to communicate between the interfaces. I am assuming that some NAT settings are causing my issue. Below is my running config: ASA Version 8.2(3) ! hostname asa enable password XXXXXXXX encrypted passwd XXXXXXXX encrypted names ! interface Ethernet0/0 switchport access vlan 400 ! interface Ethernet0/1 switchport access vlan 400 ! interface Ethernet0/2 switchport access vlan 420 ! interface Ethernet0/3 switchport access vlan 420 ! interface Ethernet0/4 switchport access vlan 450 ! interface Ethernet0/5 switchport access vlan 450 ! interface Ethernet0/6 switchport access vlan 500 ! interface Ethernet0/7 switchport access vlan 500 ! interface Vlan400 nameif outside security-level 0 ip address XX.XX.XX.10 255.255.255.248 ! interface Vlan420 nameif public security-level 20 ip address 192.168.20.1 255.255.255.0 ! interface Vlan450 nameif dmz security-level 50 ip address 192.168.10.1 255.255.255.0 ! interface Vlan500 nameif inside security-level 100 ip address 192.168.0.1 255.255.255.0 ! ftp mode passive clock timezone JST 9 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network DM_INLINE_NETWORK_1 network-object host XX.XX.XX.11 network-object host XX.XX.XX.13 object-group service ssh_2220 tcp port-object eq 2220 object-group service ssh_2251 tcp port-object eq 2251 object-group service ssh_2229 tcp port-object eq 2229 object-group service ssh_2210 tcp port-object eq 2210 object-group service DM_INLINE_TCP_1 tcp group-object ssh_2210 group-object ssh_2220 object-group service zabbix tcp port-object range 10050 10051 object-group service DM_INLINE_TCP_2 tcp port-object eq www group-object zabbix object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service http_8029 tcp port-object eq 8029 object-group network DM_INLINE_NETWORK_2 network-object host 192.168.20.10 network-object host 192.168.20.30 network-object host 192.168.20.60 object-group service imaps_993 tcp description Secure IMAP port-object eq 993 object-group service public_wifi_group description Service allowed on the Public Wifi Group. Allows Web and Email. service-object tcp-udp eq domain service-object tcp-udp eq www service-object tcp eq https service-object tcp-udp eq 993 service-object tcp eq imap4 service-object tcp eq 587 service-object tcp eq pop3 service-object tcp eq smtp access-list outside_access_in remark http traffic from outside access-list outside_access_in extended permit tcp any object-group DM_INLINE_NETWORK_1 eq www access-list outside_access_in remark ssh from outside to web1 access-list outside_access_in extended permit tcp any host XX.XX.XX.11 object-group ssh_2251 access-list outside_access_in remark ssh from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group ssh_2229 access-list outside_access_in remark http from outside to penguin access-list outside_access_in extended permit tcp any host XX.XX.XX.10 object-group http_8029 access-list outside_access_in remark ssh from outside to internal hosts access-list outside_access_in extended permit tcp any host XX.XX.XX.13 object-group DM_INLINE_TCP_1 access-list outside_access_in remark dns service to internal host access-list outside_access_in extended permit object-group TCPUDP any host XX.XX.XX.13 eq domain access-list dmz_access_in extended permit ip 192.168.10.0 255.255.255.0 any access-list dmz_access_in extended permit tcp any host 192.168.10.29 object-group DM_INLINE_TCP_2 access-list public_access_in remark Web access to DMZ websites access-list public_access_in extended permit object-group TCPUDP any object-group DM_INLINE_NETWORK_2 eq www access-list public_access_in remark General web access. (HTTP, DNS & ICMP and Email) access-list public_access_in extended permit object-group public_wifi_group any any pager lines 24 logging enable logging asdm informational mtu outside 1500 mtu public 1500 mtu dmz 1500 mtu inside 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 60 global (outside) 1 interface global (dmz) 2 interface nat (public) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 2229 192.168.0.29 2229 netmask 255.255.255.255 static (inside,outside) tcp interface 8029 192.168.0.29 www netmask 255.255.255.255 static (dmz,outside) XX.XX.XX.13 192.168.10.10 netmask 255.255.255.255 dns static (dmz,outside) XX.XX.XX.11 192.168.10.30 netmask 255.255.255.255 dns static (dmz,inside) 192.168.0.29 192.168.10.29 netmask 255.255.255.255 static (dmz,public) 192.168.20.30 192.168.10.30 netmask 255.255.255.255 dns static (dmz,public) 192.168.20.10 192.168.10.10 netmask 255.255.255.255 dns static (inside,dmz) 192.168.10.0 192.168.0.0 netmask 255.255.255.0 dns access-group outside_access_in in interface outside access-group public_access_in in interface public access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 XX.XX.XX.9 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 20 console timeout 0 dhcpd dns 61.122.112.97 61.122.112.1 dhcpd auto_config outside ! dhcpd address 192.168.20.200-192.168.20.254 public dhcpd enable public ! dhcpd address 192.168.0.200-192.168.0.254 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 130.54.208.201 source public webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp !

    Read the article

  • Debian Linux bridging router intermittently dropping packets [migrated]

    - by nomen
    My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

    Read the article

  • Solaris: What comes next?

    - by alanc
    As you probably know by now, a few months ago, we released Solaris 11 after years of development. That of course means we now need to figure out what comes next - if Solaris 11 is “The First Cloud OS”, then what do we need to make future releases of Solaris be, to be modern and competitive when they're released? So we've been having planning and brainstorming meetings, and I've captured some notes here from just one of those we held a couple weeks ago with a number of the Silicon Valley based engineers. Now before someone sees an idea here and calls their product rep wanting to know what's up, please be warned what follows are rough ideas, and as I'll discuss later, none of them have any committment, schedule, working code, or even plan for integration in any possible future product at this time. (Please don't make me force you to read the full Oracle future product disclaimer here, you should know it by heart already from the front of every Oracle product slide deck.) To start with, we did some background research, looking at ideas from other Oracle groups, and competitive OS'es. We examined what was hot in the technology arena and where the interesting startups were heading. We then looked at Solaris to see where we could apply those ideas. Making Network Admins into Socially Networking Admins We all know an admin who has grumbled about being the only one stuck late at work to fix a problem on the server, or having to work the weekend alone to do scheduled maintenance. But admins are humans (at least most are), and crave companionship and community with their fellow humans. And even when they're alone in the server room, they're never far from a network connection, allowing access to the wide world of wonders on the Internet. Our solution here is not building a new social network - there's enough of those already, and Oracle even has its own Oracle Mix social network already. What we proposed is integrating Solaris features to help engage our system admins with these social networks, building community and bringing them recognition in the workplace, using achievement recognition systems as found in many popular gaming platforms. For instance, if you had a Facebook account, and a group of admin friends there, you could register it with our Social Network Utility For Facebook, and then your friends might see: Alan earned the achievement Critically Patched (April 2012) for patching all his servers. Matt is only at 50% - encourage him to complete this achievement today! To avoid any undue risk of advertising who has unpatched servers that are easier targets for hackers to break into, this information would be tightly protected via Facebook's world-renowned privacy settings to avoid it falling into the wrong hands. A related form of gamification we considered was replacing simple certfications with role-playing-game-style Experience Levels. Instead of just knowing an admin passed a test establishing a given level of competency, these would provide recruiters with a more detailed level of how much real-world experience an admin has. Achievements such as the one above would feed into it, but larger numbers of experience points would be gained by tougher or more critical tasks - such as recovering a down system, or migrating a service to a new platform. (As long as it was an Oracle platform of course - migrating to an HP or IBM platform would cause the admin to lose points with us.) Unfortunately, we couldn't figure out a good way to prevent (if you will) “gaming” the system. For instance, a disgruntled admin might decide to start ignoring warnings from FMA that a part is beginning to fail or skip preventative maintenance, in the hopes that they'd cause a catastrophic failure to earn more points for bolstering their resume as they look for a job elsewhere, and not worrying about the effect on your business of a mission critical server going down. More Z's for ZFS Our suggested new feature for ZFS was inspired by the worlds most successful Z-startup of all time: Zynga. Using the Social Network Utility For Facebook described above, we'd tie it in with ZFS monitoring to help you out when you find yourself in a jam needing more disk space than you have, and can't wait a month to get a purchase order through channels to buy more. Instead with the click of a button you could post to your group: Alan can't find any space in his server farm! Can you help? Friends could loan you some space on their connected servers for a few weeks, knowing that you'd return the favor when needed. ZFS would create a new filesystem for your use on their system, and securely share it with your system using Kerberized NFS. If none of your friends have space, then you could buy temporary use space in small increments at affordable rates right there in Facebook, using your Facebook credits, and then file an expense report later, after the urgent need has passed. Universal Single Sign On One thing all the engineers agreed on was that we still had far too many "Single" sign ons to deal with in our daily work. On the web, every web site used to have its own password database, forcing us to hope we could remember what login name was still available on each site when we signed up, and which unique password we came up with to avoid having to disclose our other passwords to a new site. In recent years, the web services world has finally been reducing the number of logins we have to manage, with many services allowing you to login using your identity from Google, Twitter or Facebook. So we proposed following their lead, introducing PAM modules for web services - no more would you have to type in whatever login name IT assigned and try to remember the password you chose the last time password aging forced you to change it - you'd simply choose which web service you wanted to authenticate against, and would login to your Solaris account upon reciept of a cookie from their identity service. Pinning notes to the cloud We also all noted that we all have our own pile of notes we keep in our daily work - in text files in our home directory, in notebooks we carry around, on white boards in offices and common areas, on sticky notes on our monitors, or on scraps of paper pinned to our bulletin boards. The contents of the notes vary, some are things just for us, some are useful for our groups, some we would share with the world. For instance, when our group moved to a new building a couple years ago, we had a white board in the hallway listing all the NIS & DNS servers, subnets, and other network configuration information we needed to set up our Solaris machines after the move. Similarly, as Solaris 11 was finishing and we were all learning the new network configuration commands, we shared notes in wikis and e-mails with our fellow engineers. Users may also remember one of the popular features of Sun's old BigAdmin site was a section for sharing scripts and tips such as these. Meanwhile, the online "pin board" at Pinterest is taking the web by storm. So we thought, why not mash those up to solve this problem? We proposed a new BigAddPin site where users could “pin” notes, command snippets, configuration information, and so on. For instance, once they had worked out the ideal Automated Installation manifest for their app server, they could pin it up to share with the rest of their group, or choose to make it public as an example for the world. Localized data, such as our group's notes on the servers for our subnet, could be shared only to users connecting from that subnet. And notes that they didn't want others to see at all could be marked private, such as the list of phone numbers to call for late night pizza delivery to the machine room, the birthdays and anniversaries they can never remember but would be sleeping on the couch if they forgot, or the list of automatically generated completely random, impossible to remember root passwords to all their servers. For greater integration with Solaris, we'd put support right into the command shells — redirect output to a pinned note, set your path to include pinned notes as scripts you can run, or bring up your recent shell history and pin a set of commands to save for the next time you need to remember how to do that operation. Location service for Solaris servers A longer term plan would involve convincing the hardware design groups to put GPS locators with wireless transmitters in future server designs. This would help both admins and service personnel trying to find servers in todays massive data centers, and could feed into location presence apps to help show potential customers that while they may not see many Solaris machines on the desktop any more, they are all around. For instance, while walking down Wall Street it might show “There are over 2000 Solaris computers in this block.” [Note: this proposal was made before the recent media coverage of a location service aggregrator app with less noble intentions, and in hindsight, we failed to consider what happens when such data similarly falls into the wrong hands. We certainly wouldn't want our app to be misinterpreted as “There are over $20 million dollars of SPARC servers in this building, waiting for you to steal them.” so it's probably best it was rejected.] Harnessing the power of the GPU for Security Most modern OS'es make use of the widespread availability of high powered GPU hardware in today's computers, with desktop environments requiring 3-D graphics acceleration, whether in Ubuntu Unity, GNOME Shell on Fedora, or Aero Glass on Windows, but we haven't yet made Solaris fully take advantage of this, beyond our basic offering of Compiz on the desktop. Meanwhile, more businesses are interested in increasing security by using biometric authentication, but must also comply with laws in many countries preventing discrimination against employees with physical limations such as missing eyes or fingers, not to mention the lost productivity when employees can't login due to tinted contacts throwing off a retina scan or a paper cut changing their fingerprint appearance until it heals. Fortunately, the two groups considering these problems put their heads together and found a common solution, using 3D technology to enable authentication using the one body part all users are guaranteed to have - pam_phrenology.so, a new PAM module that uses an array USB attached web cams (or just one if the user is willing to spin their chair during login) to take pictures of the users head from all angles, create a 3D model and compare it to the one in the authentication database. While Mythbusters has shown how easy it can be to fool common fingerprint scanners, we have not yet seen any evidence that people can impersonate the shape of another user's cranium, no matter how long they spend beating their head against the wall to reshape it. This could possibly be extended to group users, using modern versions of some of the older phrenological studies, such as giving all users with long grey beards access to the System Architect role, or automatically placing users with pointy spikes in their hair into an easy use mode. Unfortunately, there are still some unsolved technical challenges we haven't figured out how to overcome. Currently, a visit to the hair salon causes your existing authentication to expire, and some users have found that shaving their heads is the only way to avoid bad hair days becoming bad login days. Reaction to these ideas After gathering all our notes on these ideas from the engineering brainstorming meeting, we took them in to present to our management. Unfortunately, most of their reaction cannot be printed here, and they chose not to accept any of these ideas as they were, but they did have some feedback for us to consider as they sent us back to the drawing board. They strongly suggested our ideas would be better presented if we weren't trying to decipher ink blotches that had been smeared by the condensation when we put our pint glasses on the napkins we were taking notes on, and to that end let us know they would not be approving any more engineering offsites in Irish themed pubs on the Friday of a Saint Patrick's Day weekend. (Hopefully they mean that situation specifically and aren't going to deny the funding for travel to this year's X.Org Developer's Conference just because it happens to be in Bavaria and ending on the Friday of the weekend Oktoberfest starts.) They recommended our research techniques could be improved over just sitting around reading blogs and checking our Facebook, Twitter, and Pinterest accounts, such as considering input from alternate viewpoints on topics such as gamification. They also mentioned that Oracle hadn't fully adopted some of Sun's common practices and we might have to try harder to get those to be accepted now that we are one unified company. So as I said at the beginning, don't pester your sales rep just yet for any of these, since they didn't get approved, but if you have better ideas, pass them on and maybe they'll get into our next batch of planning.

    Read the article

  • Transparent Squid : Logging client ip problem

    - by llazzaro
    Hello, I am using the following rules in iptables in my network to use a transparent proxy * iptables -t nat -A PREROUTING -i eth0 -s ! squid-box -p tcp --dport 80 -j DNAT --to squid-box:3128 * iptables -t nat -A POSTROUTING -o eth0 -s local-network -d squid-box -j SNAT --to iptables-box * iptables -A FORWARD -s local-network -d squid-box -i eth0 -o eth0 -p tcp --dport 3128 -j ACCEPT But my squid log, always logs gateway IP (172.16.0.1) Do you know an alternative to not lose client IP? (of course avoid saing manual proxy setup!)

    Read the article

  • SSH: Connection Reset by Peer

    - by hopeless
    I have a Solaris 10 server on another network. I can ping it and telnet to it, but ssh doesn't connect. PuTTY log contains nothing of interest (they both negotiate to ssh v2) and then I get "Event Log: Network error: Software caused connection abort". ssh is defintely running: svcs -a | grep ssh online 12:12:04 svc:/network/ssh:default Here's an extract from the server's /var/adm/messages (anonymised) Jun 8 19:51:05 ******* sshd[26391]: [ID 800047 auth.crit] fatal: Read from socket failed: Connection reset by peer However, if I telnet to the box, I can login to ssh locally. I can also ssh to other (non-Solaris) machines on that network fine so I don't believe that it's a network issue (though, since I'm a few hundred miles away, I can't be sure). The server's firewall is disabled, so that shouldn't be a problem root@******** # svcs -a | grep -i ipf disabled Apr_27 svc:/network/ipfilter:default Any ideas what I should start checking? Update: Based on the feedback below, I've run sshd in debug mode. Here's the client output: $ ssh -vvv root@machine -p 32222 OpenSSH_5.0p1, OpenSSL 0.9.8h 28 May 2008 debug2: ssh_connect: needpriv 0 debug1: Connecting to machine [X.X.X.X] port 32222. debug1: Connection established. debug1: identity file /home/lawrencj/.ssh/identity type -1 debug1: identity file /home/lawrencj/.ssh/id_rsa type -1 debug1: identity file /home/lawrencj/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version Sun_SSH_1.1 debug1: no match: Sun_SSH_1.1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.0 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer And here's the server output: root@machine # /usr/lib/ssh/sshd -d -p 32222 debug1: sshd version Sun_SSH_1.1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: Bind to port 32222 on ::. Server listening on :: port 32222. debug1: Bind to port 32222 on 0.0.0.0. Server listening on 0.0.0.0 port 32222. debug1: Server will not fork when running in debugging mode. Connection from 1.2.3.4 port 2652 debug1: Client protocol version 2.0; client software version OpenSSH_5.0 debug1: match: OpenSSH_5.0 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-Sun_SSH_1.1 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible Unknown code 0 ) debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer debug1: Calling cleanup 0x4584c(0x0) This line seems a likely candidate: debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible

    Read the article

  • UDK game Prisoners/Guards

    - by RR_1990
    For school I need to make a little game with UDK, the concept of the game is: The player is the headguard, he will have some other guard (bots) who will follow him. Between the other guards and the player are some prisoners who need to evade the other guards. It needs to look like this My idea was to let the guard bots follow the player at a certain distance and let the prisoners bots in the middle try to evade the guard bots. Now is the problem i'm new to Unreal Script and the school doesn't support me that well. Untill now I have only was able to make the guard bots follow me. I hope you guys can help me or make me something that will make this game work. Here is the class i'm using to let te bots follow me: class ChaseControllerAI extends AIController; var Pawn player; var float minimalDistance; var float speed; var float distanceToPlayer; var vector selfToPlayer; auto state Idle { function BeginState(Name PreviousStateName) { Super.BeginState(PreviousStateName); } event SeePlayer(Pawn p) { player = p; GotoState('Chase'); } Begin: player = none; self.Pawn.Velocity.x = 0.0; self.Pawn.Velocity.Y = 0.0; self.Pawn.Velocity.Z = 0.0; } state Chase { function BeginState(Name PreviousStateName) { Super.BeginState(PreviousStateName); } event PlayerOutOfReach() { `Log("ChaseControllerAI CHASE Player out of reach."); GotoState('Idle'); } // class ChaseController extends AIController; CONTINUED // State Chase (continued) event Tick(float deltaTime) { `Log("ChaseControllerAI in Event Tick."); selfToPlayer = self.player.Location - self.Pawn.Location; distanceToPlayer = Abs(VSize(selfToPlayer)); if (distanceToPlayer > minimalDistance) { PlayerOutOfReach(); } else { self.Pawn.Velocity = Normal(selfToPlayer) * speed; //self.Pawn.Acceleration = Normal(selfToPlayer) * speed; self.Pawn.SetRotation(rotator(selfToPlayer)); self.Pawn.Move(self.Pawn.Velocity*0.001); // or *deltaTime } } Begin: `Log("Current state Chase:Begin: " @GetStateName()@""); } defaultproperties { bAdjustFromWalls=true; bIsPlayer= true; minimalDistance = 1024; //org 1024 speed = 500; }

    Read the article

  • Single-port 2600 router with 2900XL switch

    - by Slava Maslennikov
    I have a setup, where the single port 2600 router is in port 0/2 in the switch, outside network is on port 0/1, and the rest (0/3-0/24) should be clients for the second network that would be managed by the 2600 router. I configured everything with two VLANs: 100 for outside (0/2-0/24), 200 for inside (0/1-0/2). 0/2 is a trunk port for the two VLANs. The issue that came about is that I can't have two VLANs on at once: software doesn't allow it. Now, I can ping the outside network devices (172.16.7.1, 172.16.7.103), and even google (8.8.8.8) from the router, but not the switch. Devices on connected get a DHCP lease properly but can't ping outside the network, just the router - 172.17.7.1 and the switch itself, 172.17.7.7. The configuration for both the router and the switch are here, as well as below. Router: rt.throom#sho run Building configuration... Current configuration : 1015 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname rt.throom ! enable password To053cret ! ! ! ! ! no ip subnet-zero ip dhcp excluded-address 172.17.7.1 172.17.7.2 ip dhcp excluded-address 172.17.7.3 172.17.7.4 ip dhcp excluded-address 172.17.7.5 ! ip dhcp pool VLAN200 network 172.17.7.0 255.255.255.0 default-router 172.17.7.1 dns-server 8.8.8.8 ! ip audit notify log ip audit po max-events 100 ! ! ! ! ! ! ! interface Ethernet0/0 no ip address ! interface Ethernet0/0.100 encapsulation dot1Q 100 ip address 172.16.7.15 255.255.255.0 ip nat outside ! interface Ethernet0/0.200 encapsulation dot1Q 200 ip address 172.17.7.1 255.255.255.0 ip nat inside ! router eigrp 20 network 172.16.0.0 network 172.17.0.0 no auto-summary no eigrp log-neighbor-changes ! no ip classless no ip http server ! access-list 1 permit 172.17.7.0 0.0.0.255 ! ! line con 0 line aux 0 line vty 0 4 login ! end Switch: sw.throom#sho run Building configuration... Current configuration: ! version 11.2 no service pad no service udp-small-servers no service tcp-small-servers ! hostname sw.throom ! enable password Oh5053cret ! ! no spanning-tree vlan 100 no spanning-tree vlan 200 ip subnet-zero ! ! interface VLAN1 no ip address no ip route-cache ! interface FastEthernet0/1 switchport access vlan 100 spanning-tree portfast ! interface FastEthernet0/2 switchport trunk encapsulation dot1q switchport mode trunk ! interface FastEthernet0/3 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/4 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/5 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/6 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/7 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/8 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/9 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/10 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/11 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/12 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/13 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/14 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/15 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/16 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/17 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/18 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/19 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/20 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/21 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/22 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/23 switchport access vlan 200 spanning-tree portfast ! interface FastEthernet0/24 switchport access vlan 200 spanning-tree portfast ! ! line con 0 stopbits 1 line vty 0 4 login line vty 5 9 login ! end sho ip route gives: Gateway of last resort is 172.16.7.1 to network 0.0.0.0 172.17.0.0/24 is subnetted, 1 subnets C 172.17.7.0 is directly connected, Ethernet0/0.200 172.16.0.0/24 is subnetted, 1 subnets C 172.16.7.0 is directly connected, Ethernet0/0.100 S* 0.0.0.0/0 [1/0] via 172.16.7.1

    Read the article

  • How to ping virtualbox guest machine by hostname? [migrated]

    - by Punit Soni
    Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

    Read the article

  • How to setup a Wireless Access-Point using my laptop's WiFi card?

    - by Abdul Karim Memon
    want to share my Laptops (running Ubuntu 10.10) Broadband with my Android (Galaxy Mini) running 2.2.1. Since Androids currently do not support ad-hoc networks so the "Create new wireless network.." won't help. Q1) How do i setup a Wireless Access Point using my Laptops WiFi card? Q2) What is the difference between an "ad-hoc" network and an "access point"? **abdulkarim@aK-laptop**:~$ lspci | grep ireless 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) iw list Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning) * 2472 MHz [13] (20.0 dBm) (passive scanning) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * ** AP * AP/VLAN** * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (55) * Unknown command (57) * Unknown command (59) * set_wiphy_netns * Unknown command (65) * connect * disconnect

    Read the article

  • How to send a popup message to unknow computer connected to my WLAN?

    - by Leandro
    Is there any way to send a popup message from a Linux systen to a "random" laptop/tablet/mobile linked to my Wireless network ? For example, if I let my WLAN open and I see a not recognized computer connected to it, is there anyway to send to that device a message ? On the other hand, if I am connected to someone else open network and they may or may not be aware that their network is open, can I send them a message warning that I am accessing their network? Probably for a completely "random" device the answer should be no. But if we restrict to laptops with Win7 or Linux SO is there any service running by default on such systems that allows one to send such popup messages ? PS: I have no practical motivation for this question. This is only a curiosity.

    Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >