Search Results

Search found 7992 results on 320 pages for 'monitor tricks'.

Page 277/320 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Windows Server 2012 Hyper-V very slow

  - by Matt Taylor

  I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

  Read the article

• Tomato/DD-WRT router to act as switch & only NAT some port

  - by fseto

  BACKGROUND: I have a device that must use a real IP address. Currently, my ISP uses DHCP and I can have up to 4 real IP address assigned. However, the cable modem only have 1 ethernet port and it's connected to my router (running Tomato, but can run DD-wrt or other Openwrt if required). Question stems from how I can connect the additional device, requiring a real IP? EASY SOLUTION: would be to get a switch and connect to the CM, Router, and Device. But alas, I want to avoid this route, since: my wiring cabinet in my home is drawing lots of power and heat already Device will be unprotected by any firewall unable to monitor the traffic to/from device. Besides, what would be the FUN in that? =) IDEA: So what I want to do is to configure the router, so that one of the switchport is removed from the normal br0 bridge. Instead, I want to make it behave like a switch on the WAN port. What's the best way of doing this? Should I create another bridge on the WAN & the device port? Can a single port belongs to two bridges? or would I need to create a subinterface first? Would I need a DHCP-relay? Am I expecting too much from my poor cheapie router? +------+ | CM | +--++--+ || +----WAN---------------+ | / \ Router | | BR1? BR0 | | | \ | | | {NAT} | | | / | | \ | +-P0----P1-P2-P3-Wifi--+ | +------+ |Device| +------+

  Read the article

• IP queue buffer

  - by summerbulb

  I seem to have an issue with IP queue. I have a linux machine that I am using to run some experiments. The linux machine is configured to be a router, having two NICs, connecting two other computers, and managing their network traffic. All incoming packages are captured, using iptables, and analyzed by a C application. The application analyzing the packets has a built-in delay, as part of the experiment. So I have one very fast computer sending packets through my linux-router and a (relatively) slow linux-router that analyses and deals with the packets, one by one. This situation leads to the fact that when I fire up a sender application on one of the computers connected to the linux-router, my IP queue on the linux-router gets filled up (almost) instantaneously. The IP queue's max length is currently set to 1024, and if it overflows, the packets are dropped. This is expected and i'm OK with it. But, (and this is where it gets interesting), every now and then I get the following error: "Failed to receive netlink message: No buffer space available" At start, I thought this was due to the IP queue overflow, but after some analysis i found that sometimes I get the error even if the IP queue buffer did not overflow, and sometime I DON'T get the message even though the buffer DID overflow. When I run > cat /proc/net/ip_queue, I get the following table (also used to monitor the IP queue overflow): Peer PID : 27389 Copy mode : 2 Copy range : 65535 Queue length : 0 Queue max. length : 1024 Queue dropped : 1166875 Netlink dropped : 2916 Looking at the last two values, Queue dropped seems to refer to packets that did not manage to get into the IP queue because the buffer was full. I can see this value rise as I bombard the linux-router. Netlink dropped ( as it's name implies :) ) seems to have to do with the error i'm getting. I did my best to search for material on this error, but wasn't able to find anything that seemed to point me in the required direction. Bottom line: Why am I getting this error and what can I do to avoid it?

  Read the article

• Windows 7 notebook turn off by itself, how to check if it is due to CPU being too hot?

  - by Jian Lin

  I have a Dell Studio 15 notebook, and it just started turning off by itself yesterday. Could it be that the CPU is too hot? I have had several notebooks before and every one of them I can put them on the bed without any problem. This Dell Studio Notebook, however, seems like have the air / fan outlet pointed outward from the bottom back of the notebook, so I suspect that the air is partially blocked when it is on the bed. Are there Win 7 tools that can monitor the CPU temperature, or will some 3rd party tool be needed? (I try to stick to official tools nowadays). Also, it is running Win 7 Ulitmate, there is actually no utility or background service from Win 7 or from Dell that detects when the temperature is too hot (or 95% near the max), pop out a message box giving a warning and say that the computer will go into sleep mode in 1 minute, but instead just turn off the computer by brute force (cutting out the power) right then and there? Update: it turned off right in front of my eyes -- it is not doing any windows update or anything. just normal use and jooooop, it turned off.

  Read the article

• Can't display RSSI values in Wireshark

  - by Giovanni Soldi

  I am trying to analyze the up-link Wireless traffic generated by my Sony Ericsson phone and captured by my D-Link router, on which I installed the DD-WRT firmware. To do this, first I log in the router and enable the prism0 interface by typing the command: wl -i eth1 monitor 1 and then I start to capture the packets by typing: tcpdump -i prism0 ether src xx:xx:xx:xx:xx:xx -s0 -w /tmp/smbshare/sony_ericsson_test.pcap where xx:xx:xx:xx:xx:xx is the MAC address of my Sony Ericsson phone. After a while I transfer the sony_ericsson_test.pcap file to my computer and open it with Wireshark program. In order to display the RSSI values I follow this procedure: Edit - Preferences... - Columns - Press "Add" button - As "Field type" I choose "IEEE 802.11 RSSI" and finally I choose name "Power" and click on "Apply" button. The problem is that the column "Power" is empty with no RSSI values. Does Anyone has a clue on why are RSSI values not displayed? Maybe I am missing a passage. Looking forward to hearing from anyone of you! Thanks in advance for your help!

  Read the article

• What is the optimum way to secure a company wide wiki?

  - by Mark Robinson

  We have a wiki which is used by over half our company. Generally it has been very positively received. However, there is a concern over security - not letting confidential information fall into the wrong hands (i.e. competitors). The default answer is to create a complicated security matrix defining who can read what document (wiki page) based on who created it. Personally I think this mainly solves the wrong problem because it creates barriers within the company instead of a barrier to the external world. But some are concerned that people at a customer site might share information with a customer which then goes to the competitor. The administration of such a matrix is a nightmare because (1) the matrix is based on department and not projects (this is a matrix organisation), and (2) because in a wiki all pages are by definition dynamic so what is confidential today might not be confidential tomorrow (but the history is always readable!). Apart from the security matrix, we've considered restricting content on the wiki to non super secret stuff, but off course that needs to be monitored. Another solution (the current) is to monitor views and report anything suspicious (e.g. one person at a customer site having 2000 views in two days was reported). Again - this is not ideal because this does not directly imply a wrong motive. Does anyone have a better solution? How can a company wide wiki be made secure and yet keep its low threshold USP? BTW we use MediaWiki with Lockdown to exclude some administrative staff.

  Read the article

• EC2 instances keep becoming inaccessible via SSH, can I use elastic loadbalancer to check SSH connectivity?

  - by Rick

  This is mainly an issue for my development ec2 server as it seems that my instance keeps becoming inaccessible via SSH. It happened yesterday so I killed that one and started a new one and happened again later today. The server still works, my web application is accessible in a web browser but whenever I try to connect via SSH I get a pemrission denied (public key) error message in my terminal. I am 100% sure I am doing nothing wrong as I can create a new instance of the exact same AMI (its a personal custom AMI), change absolutely nothing, including using the same .pem key, and then am able to SSH into that new instance using the exact same command as before (just changing the IP address). I understand that ec2 can have issues but having this happen every day seems a bit odd.. I am using an m2.xlarge instance so I don't know if these tend to be unstable, in the past I have used a small instance and had it running for months with no problems which is why I find this so odd. I am looking into using loadbalancing but it seems the only "health" checks they offer is for http or tcp so I'm not sure if I can make it monitor for SSH connectivity. This is important for development as I may make 1-2 new pushes of an application a day and use SSH to do this. I have a designer that needs to have the app always accessible as he works with the front-end files to test output with the live application. Anyways, any advice / info is appreciated

  Read the article

• Why do HTTP loopback connections not work on my subdomains?

  - by memeLab

  I have a shared hosting account at Jumba running Linux kernel 2.6.9-103.ELsmp (don't know if that helps) with cpanel 1.0 (RC1). I am using the WordPress plugin Backup Buddy, which requires HTTP loopback connections to monitor / complete backups. This works fine on memelab.com.au, but doesn't work at any subdomain (e.g.: staging.memelab.com.au). Is it possible to setup an A record or some such to remedy this? I'm aware of a workaround, (setting WP_ALTERNATE_CRON) but I find this unsatisfactory due to the messy URLs. BackupBuddy:_Frequent_Support_Issues#HTTP_Loopback_Connections_Disabled Here is the reply from my host: …as main domain have it's own separate DNS entry it have localhost entry which helps for looback connections where as subdomains don't have separate DNS zone, so it is not possible to create looback connections for it. I have cpanel access to the 'advanced zone editor' - is there anything tricky I can do there? maybe 127.0.0.2? (I remember reading that there were at least 8 available local IPs available on (some) Linuxes.) All the A records point to the server IP, with the exception of localhost.memelab.com.au which points to 127.0.0.1. I've just tried entering a new A record: localhost.itours.memelab.com.au pointing to 127.0.0.2. I still get the warning in Backup Buddy that loopback is not active, and Cpanel won't let me enter 127.0.0.1 (guess it doesn't work like that!) nslookup itours.memelab.com.au Server: 203.88.112.33 Address: 203.88.112.33#53 Non-authoritative answer: Name: itours.memelab.com.au Address: 117.55.224.177

  Read the article

• Very high-pitched noise when computer does something intense?

  - by Starkers

  "Intense" is the best word I can use to describe it because I'm not sure what it is, whether it's RAM, GPU or CPU. If I pan the camera in unity: A high pitched noise issues from the computer. The picosecond I start panning the sound starts. Stops the picosecond I stop panning. If I start an infinite loop: 2.0.0p247 :016 > x = 1 => 1 2.0.0p247 :017 > while x < 2 do 2.0.0p247 :018 > puts 'huzzah!' 2.0.0p247 :019?> end huzzah! huzzah! huzzah! An identical high pitched noise can be heard. I don't think it's the GPU due to this simple experiment. Or any monitor-weirdness (although the sound does sound like one of those old CRT monitors if you're old enough to be young when those things were about) The CPU? Or maybe my SSD? It's my first SSD and the first time I've heard this noise. Should I be worried? Regardless, what's causing this sound? I can't think what would cause such high frequency vibrations. I built the PC myself. Not enough heat paste on the CPU? Too much? Just no idea what's going on. Info: CPU Type QuadCore Intel Core i5-3570K, 3800 MHz (38 x 100) Motherboard Name Asus Maximus V Extreme Flash Memory Type Samsung 21nm TLC NAND Video Adapter Asus HD7770

  Read the article

• MRTG Monitoring of Disk

  - by Antitribu

  I am trying to monitor Disk usage over SNMP using MRTG on CentOS5.2. I'm open to any suggestions as to the best way to achieve this (I would also like to do other metrics like CPU). Please don't assume I know anything about MRTG. I am using the following config: LoadMIBs: /usr/share/snmp/mibs/UCD-SNMP-MIB.txt,/usr/share/snmp/mibs/TCP-MIB.txt workdir: /var/www/html/mrtg/temp/ # # Disk Usage Monitoring # Target[servername.]: dskPercent.0&dskPercent.0:[email protected] Title[servername.]: / on servername routers.cgi*Desc[servername.]: / on servername routers.cgi*ShortDesc[servername.]: / MaxBytes[servername.]: 100 AbsMax[servername.]: 100 Options[servername.]: growright,nopercent,gauge YLegend[servername.]: used disk space ShortLegend[servername.]: % used Legend1[servername.]: usage Legend2[servername.]: usage Legend3[servername.]: peak usage Legend4[servername.]: peak usage LegendI[servername.]: usage LegendO[servername.]: usage routers.cgi*Icon[servername.]: disk-sm.gif routers.cgi*Options[servername.]: noo,nomax,noabsmax Unscaled[servername.]: dwmy I receive the errors: Unknown SNMP var dskPercent.0 at /usr/bin/mrtg line 2035 Unknown SNMP var dskPercent.0 at /usr/bin/mrtg line 2035 From forum surfing etc the suggestion is to use the fully qualified OIDs, I'd like to avoid this (for readability). So essentially I'm wondering where can I find a mib file compatible with mrtg for it's reference or a working config file.

  Read the article

• How do you get AWS VPC EC2 instances to be able to see the AWS APIs?

  - by Peter Mounce

  We're spinning up infrastructure inside of an AWS VPC via CloudFormation. We're using auto-scaling groups to bring up VPC-EC2 instances (so, we don't bring up instances directly; ASGs manage that). Inside of a PVC, EC2 instances only have a private IP; they cannot see the outside world without further work. When these instances spin up, we have some bootstrap tasks that require talking to the various AWS APIs. We also have some ongoing tasks that require AWS API traffic. How are you tackling this apparent chicken-egg problem? We've read about: NAT instances - but don't like this so much because it's another layer to our stack. assigning elastic-IPs to each VPC instance that needs to talk - but a) they all do, and b) since we're using ASGs, we don't know which instances to assign EIPs to at provision-time, and c) we'd need to set up something to monitor those ASGs and assign EIPs when instances are terminated and replaced spinning up an instance (actually, a load-balanced pair, probably spanning AZs) to act as an AWS-API proxy for all API traffic I guess I'm wondering whether there's some kind of back-door we can open that allows our VPC EC2 instances access to the AWS API endpoints, but nothing else, for cheap-complexity setup, that doesn't add another network-hop layer to our infrastructure for serving requests.

  Read the article

• ksh Auto-Completion PuTTY Configuration

  - by Nitrodist

  I'm having a bit of a problem configuring my PuTTY client to work with the auto-completion feature in the ksh shell. I do a listing on the root with the directories /home and /homeroot and it returns the directories in a list just fine. I can't select it, though, by hitting X = (where X is the number). /home/nitrodist>ls /h #hits esc + = 1) home/ 2) homeroot/ #hits 2 + = for the 'homeroot' dir 1) home/ 2) homeroot/ #hits just the '=' key. 1) home/ 2) homeroot/ Any ideas? I've su -'d to another user who can actually do it with their PuTTY session and I can't do it there, which makes me think it's a PuTTY configuration issue. This is running on a ksh93 shell on HP-UX, if that makes any difference. Here's my ksh config: /home/campbelm>set -o Current option settings allexport off bgnice on emacs off errexit off gmacs off ignoreeof off interactive on keyword off markdirs off monitor on noexec off noclobber off noglob off nolog off notify off nounset off privileged off restricted off trackall off verbose off vi on viraw on xtrace off /home/campbelm>

  Read the article

• Why does my PC successfully boot only when unplugged for more than a few minutes?

  - by philg

  I have an HP Pavilion Elite desktop computer, model HPE-490t. I like it because it didn’t cost too much, boots itself from an SSD, came with 16 GB of RAM, and has 6 CPU cores for editing video and camera RAW images. It has one behavioral quirk that I cannot explain, however. The recent power interruptions here in the Northeast got the machine into a state where it could not be restarted. It would power up for a second or two, shut down, and then power up again, never being able to get to the point of showing anything on the monitor. I unplugged it for about 10 seconds and plugged it back in. Same behavior (fails to boot). I unplugged it and walked away for an hour, then plugged it back in and it worked perfectly! I think something similar happened after installing a second hard disk drive into this machine. So the question is why does the computer behave differently depending on how long it has been unplugged? Where is energy stored that affects the machine’s ability to boot? Capacitors in the power supply? Battery on the motherboard (there is one for the clock, but that wouldn’t be exhausted by being unplugged for an hour, I don’t think)?

  Read the article

• Nagios send mail when server is down

  - by tzulberti

  I am using nagios 3.06 to monitor the servers. When a service is critical, it sends a mail, but when a server is down no mail is sent. Even if all the services go to critical state, no mail is sent. I have the following configuration: define command {     command_name notify-host-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$" "******** Nagios ****\n\n Host: $HOSTNAME$\n Description: the server is down" } define command{     command_name notify-service-by-email     command_line python /etc/nagios3/send_mail.py "[Nagios] $HOSTNAME$: $SERVICEDESC$ ($NOTIFICATIONTYPE$)" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\nDate/Time: $LONGDATETIME$\nAdditional Info:$SERVICEOUTPUT$" } The python script is a script to sent a mail. It works if I execute it from the command line, but it doesn't sents an email from nagios. What I am doing wrong? UPDATE: The contact data is: define contact{     contact_name root     alias Root     service_notification_period 24x7     host_notification_period 24x7     service_notification_options w,u,c,r     host_notification_options d,r     service_notification_commands notify-service-by-email     host_notification_commands notify-host-by-email     email [email protected] } define contactgroup{     contactgroup_name admins     alias Nagios Administrators     members root }

  Read the article

• After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB

  - by Tom Crane

  (I have also posted this on technet but I'm running out of ideas) I've upgraded from Windows Server 2008 R2 Standard to Enterprise in order to make use of more RAM. The server previously had 32GB of RAM. The upgrade from Standard to Enterprise, using DISM, seemed to go OK, so I powered down and installed the RAM. This a Dell Poweredge T710, I was taking it from 32GB to 72GB. The BIOS recognised the RAM, although I needed to change from "Advanced ECC" to "Optimizer" mode for it to use all of it. After rebooting, windows can see the RAM but in the system panel will display: Installed memory (RAM): 72.0 GB (4.00 GB usable) In the resource monitor, the remainder of the RAM is showing as reserved for hardware. I've tried various RAM configurations, including reverting it to the same chips and same configuration as before the upgrade, but always just 4.00 GB is showing up as usable. Following some threads on these forums I've gone into msconfig and set the maximum memory "by hand" but that doesn't fix the problem. BIOS doesn't seem to have anything that looks like memory remapping which is another suggestion that has come up. How do I make this RAM available to Windows? It was available before the upgrade, because I could use the full 32GB RAM the server had to start with. A screenshot (this is after reverting to the original RAM configuration) http://screencast.com/t/5FuzevdNb I don't know if it's related, but my remote desktop configuration has also disappeared: screencast.com/t/mYedomeQWS (the bottom half of this dialog should allow me to configure Remote Desktop, it was working before the upgrade but now it isn't).

  Read the article

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

• Orphaned SQL Recordsets/Connections with IIS

  - by Damian

  I have an IIS 6 site running on Windows 2003 Server x86 with MS SQL2005 Enterprise edition running ASP Classic (no choice). The site runs very fast with about 8000 page views per hour. All of my SQL tables are indexed and I have used the profiler to check my queries, the slowest of which is only about 10-15ms. I have autoshrink disabled, autogrow is set to 250mb, database is 2gb with 800mb of free space. My problem is that every now and then the site will slow to a crawl for no reason. Pages that just have a simple 'connect to databse and increment a hit counter' work ok, but more SQL intensive pages that normally execute in about 60ms take 25,000ms to run. This happens for about 30 seconds and then goes away. I was having an issue with orphan recordsets and connections due to the way I was releasing them. I have fixed this up and the issue is much better, but I am still getting them. Is there a way with permon, etc. to track when SQL Server or Windows closes these Orphan connections? At least if I can monitor the issue I will know if I am making progress or if I am even looking at the right things. Is there anything else I might be missing? Thank you!

  Read the article

• Flickering dual screens in Virtual Box Ubuntu 13.10 Guest

  - by alexleonard

  I have Ubuntu 13.10 x64 installed as a guest in VirtualBox (under a Windows 8.1 host) and have the settings for the virtual machine setup to run with a monitor count of 2, 128MB video memory and 3D acceleration enabled. In my guest I have the virtual box additions installed (which allowed me to have two 1920x1080 screens). Here's a screenshot of my VM settings. My laptop is an Asus N550JV which has both Intel's HD Graphics 4600 GPU and Nvidia's GeForce GT 750M. By default though I believe the Intel GFX card is being used to render the VM. When I boot up the VM it loads perfectly on dual screens, however whenever I move the mouse from one screen to the other (I have a Dell S2340L running over a HDMI connection as a second screen) the screen flickers. I've tried a variety of settings changes in both Ubuntu and the VM settings, but cannot seem to stop this screen flicker. I also used the NVidia control panel in Windows to force the dedicated graphics card to always be used but found that the display driver sometimes crashed whilst working in the VM, resulting in my VM session being destroyed, so I figured it's better to stick with the Intel GFX as that appears to be more stable. I also tried without 3D acceleration but that was much worse, and if I ran the VM with a low amount of graphics memory it really struggled. Here's my dmesg output: http://pastebin.com/1LJuYWMj (not sure if this is helpful in this situation). I read some posts suggesting changes to /etc/X11/xorg.conf but I don't appear to have an xorg.conf file. There were also a few posts (though related to Synergy) suggesting running xset -dpms but this command doesn't appear to have had any effect for me. As an additional note, I'm finding that window drawing in the guest is a little laggy/glitchy. For example, quickly scrolling through a web page may result in parts of the viewport displaying original content. Certainly I notice drawing issues most in the web browser, but it also impacts other software with parts of the window not being drawn when, say, switching between accounts in thunderbird. Any suggestions greatly appreciated!

  Read the article

• Is a Hyperthreaded CPU more powerful and more efficient than a Dual-core CPU? [closed]

  - by user1811864

  which computer to choose with Pentium processor hello they are getting rid of the old computer equipment in the office and i have to choose the computer to take home i get first choice to pick. -15 inch lcd screen 4 gb of ram core 2 duo dual Core E8400 3.00 GHz dvd writer windows vista/ linux -15 inch crt monitor with 2 gb ram and pentium 4 2 ghz single core HT technology windows xp hardisks both 250 GB my friend is telling me to choose the second one Pentium single core HT because he told me it runs faster becuase of HT technology and cooler and consumes less current electricity so it wont get overheated because it has HT technology so it's high definition for encoding and watching HD movies and HD sound and is like a gaming pc to play internet games. And also he said the dual core 8400 runs at 3 ghz compared to the 2 ghz so it heats very much because of the two extra cores so it takes more current raising electricty bills and is not good for gaming and watching HD movies and internet flash animations and games because of getting heated everytime. And he wants to choose and take the E8400 because he has air conditioning at home so it will be safe from heating. So which one computer should i take is it really faster because of the HT High definition technology and will i be able to play internet flash card games better and watch good HD movies Youtube etc and play all the music and songs.

  Read the article

• How I can fix the "Display Driver has stopped responding and has recovered"?

  - by Vitor Rangel

  I'm using a GeForce GTX 580, with Windows 7 64-bit. The driver version of the GTX is 301.42. The problem happens after a few minutes, when I'm playing specifc games. It won't happen in all games - And I don't have any idea why these games doesn't work. The games that doesn't work: Battlefield 3, Civilization V, Sniper Elite V2. The games that work: Mass Effect 3, Crysis 2, Team Fortress 2, Left 4 Dead 2, Skyrim, L.A. Noire. As you can see, it's not a problem of "The games that demand more stop working". I've tryed updating the driver of the graphics-card, the bios of the motherboard, even formated my computer (It was needing it) and instaled every driver in the last version possible. This problem happens since I bought my graphics-card, 6 months ago. After a few minutes, from 10 to 20, the pixels in the monitor become strange, with random colors and effects, like it was broken. Then, everything goes black, and the message appears "Display Driver has stopped responding and has recovered". After that, I need to close the game and start again. I am not overclocking, and my temperature never goes higher than 70ºC.

  Read the article

• Ubuntu 12.10, Unity, AMD 12.11 beta drivers, AMD APP SDK 2.7 and OpenCL detection of multiple gpus

  - by junkie

  I'm using Ubuntu 12.10, AMD 12.11 beta drivers, AMD APP SDK 2.7 and OpenCL. I have three amd radeon 7990s plugged in each of which are a dual 7970 so I have six gpus altogether. I plan to go up to eight in a few days. Windows couldn't use even 4 but linux works fine with 6 so far. The strange thing is that the six gpus are only detected by OpenCL in unity (the ubuntu default window manager). If I switch to e17, blackbox or fluxbox or anything else for that matter OpenCL only detects one. I'm using a simple OpenCL program to list all devices to check. I've also checked the output of aticonfig --list-adapters, fglxinfo and clinfo. The first two always show six in all window managers wheras clinfo shows 6 in unity but 1 gpu in all other WMs. I'm also using an X config generated by aticonfig --initial -f --adapter=all. I'm also only using one monitor. I've also checked using lsmod that the fglrx module is loaded in all WMs. So I have two questions. Why does OpenCL see six gpus only in unity? How can I enable six gpus on other lightweight WMs? Basically I'm getting at what determines how many gpus the OpenCL runtime sees? Thanks.

  Read the article

• GUI interfaces to ATI card behave weirdly out of the box and after updates.

  - by jdk

  My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

  Read the article

• batch copy files with error log on missing permissions

  - by sc911

  Hi *, I'm searching for a tool to batch-copy files, that should support the following points: copy files from a net-share report any errors show errors only or filter log on errors don't stop on an error also report if a file or a folder could not be copied due to missing permissions if possible it should have a queue where new job can be added while copying I tried the following tools: TerraCopy: takes a lot time to just calculate the time and the size of the job and does not report errors due to missing permissions (it doesn't even add those files to the copy-queue) Karne's replicator: does not report errors due to missing permissions xcopy: does a great job when using the right parameters and piping the output to a file (in the German localization xcopy /k /r /e /i /s /c /h SOURCE TARGET>LOGFILE 2>&1 will do the job. opening the logfile in IE will give you a great monitor). but quing jobs it not possible (ok, you can join them all in a batch-file, but you can not queue jobs while another one is running (hm, thinking of a batch-script that loops through a file with the source-target-config...)) to be continued Which tools do you use? Tell me! Thx sc911

  Read the article

• Windows Explorer Hangs on Right-Click

  - by Bryan

  I am not sure if this is the right site to post this one as I typically post coding questions on stackoverflow. But I'll ask anyways and hopefully someone can move it if it's incorrect. Currently I have a customer built PC, utilizing an Intel i7 chip, 1300WATT PSU, 8Gigs of RAM, and two video cards. Originally I had the one video card (NVIDIA) that used the PSU and had two DVI output. After purchasing a third monitor I installed another ATI) graphics card not needed any PSU connectors. After installing and restarting, I noticed that when I right-click on my desktop, or through Windows Explorer it will hang, freeze then restarted. Sometimes after Windows Explorer restarts the problem dissipates. I checked to make sure everything was connected properly and it was. I repaired the ATI Catalyst Control Center to see if that had an issue, and I checked to see if either video card required updated drivers. Nothing worked. I tried restarting my PC and that didn't work. I tried using ShellXView (I forgot what it's actually called) and tried closed processes but that didn't work. Does anyone have any idea what could have caused this orpossible solutions I should try?< Thanks in advance.

  Read the article

• Someone from china wants kill my entry bandwidth??

  - by yes123

  Hi guys. Someoen from china with two different ip is downloading the same big file from my server. Their ip are: 122.89.45.210 60.210.7.62 They requesting this file and downloading more than 20 times per minute. What Can I do to prevent this? (I am on gentoo with root access) And WHY they do this to a site that doesn't have nothing to do with china ? ADD1: Other ips: 221.8.60.131 124.67.47.56 119.249.179.139 60.9.0.176 ADD2: the stupid thing is they are requesting only 1 single file lol. Or they want that file removed (tho i don't see why) Or they are pretty stupid ADD3: Situation is getting worse. IP are spreading from other countries too (usa and korea if www.geobytes.com/iplocator.htm it's right) And now they are requesting another file. ADD4: it seems after they realized i removed that file they stopped attacking me. I will monitor the situation. They started again after a sleep of 3-4 mintues with the same file (lucky me). Hard to say why this is happening

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >