Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 278/624 | < Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >

• The Middle of Every Project

  - by andrew.sparks

  I read a quote somewhere “The middle of every successful project looks like a mess.” or something to that effect. I suppose the projects where the beginning, middle and end are a mess are the ones you need to watch out for. Right now we are in ramp up of the maintenance/support teams at a big project in the Nordics. We are facing a year of mixed mode operations, where we have production operations and the phased rollout to new locations in parallel. The support team supports, and the deployment team deploys. As usual the assumption right up to about a month or so before initial go-live was that the deployment team would carry the support. Not! Consequently we had a last minute scramble over the Christmas/New Year to fire up a support/maintenance team. While it is a bit messy and not perfect – the quality of the mess (I mean scramble) is not so bad. Weekly operational review with the operational delivery managers, written issue lists and assigned actions, candid discussions getting the problems on the table and documented, issues getting solved and moved off the table. So while the middle of a project might look like a mess (even the start) it is methodical use of project management tools of checklists and scheduled communication points that are helping us navigate out of the mess and bring it all under control.

  Read the article

• DIY Homemade Hybrid Rocket Engine [Video]

  - by Jason Fitzpatrick

  Remember the guy with the cool DIY astronaut ice cream build? He’s back with a mini hybrid rocket engine that runs off oxygen and acrylic. I built a small rocket engine for demonstration purposes. The engine is built from a 2″ diameter acrylic rod through which I drilled a 0.5″ hole. The oxygen at 80 psi or less is passed through the hole and then is forced through a convergent-divergent nozzle at the tail end. The nozzle’s throat is about 0.25″ and expands to 0.625″. I lit the engine by inserting a burning cotton swab (with wooden stick) while a small amount of oxygen was flowing. The acrylic catches fire very easily in a pure oxygen environment. The engine can be throttled and shut off completely, which is a major benefit to hybrid engine designs. Solid-fuel rockets cannot be throttled or shut off, which makes them difficult to control. [via Make] HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

  Read the article

• why dstat failed with --tcp option?

  - by hugemeow

  why --tcp option failed? should i install some package? if yes, which package i should install? this question is not the same as http://stackoverflow.com/questions/10475991/tcp-sockets-double-messages dstat --tcp Module tcp has problems. (Cannot open file /proc/net/tcp6.) None of the stats you selected are available. what is the problem with module tcp, how to find the problem? what i should do in order to fix this issue?

  Read the article

• How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET

  - by Eric Z Goodnight

  Color in digital photos doesn’t always end up the way you want, or even the way you see it. Thankfully, Photoshop, GIMP and Paint.NET all have excellent color correction tools, which you’ll find can solve your various color woes. It can be a pain to take a photograph and find that the color is oddly affected by the environment, lighting, or perhaps the choices you made when you shot the image in the first place. All of these problems are changeable, and in fact, you’ll be surprised how easy they can be to adjust. Read on to see what tools can help adjust your image in each of these three major graphics programs. Latest Features How-To Geek ETC How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? Get the MakeUseOf eBook Guide to Hacker Proofing Your PC Sync Your Windows Computer with Your Ubuntu One Account [Desktop Client] Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper]

  Read the article

• Update Manager won't open (error related to pythonverbose)

  - by Mateus Machado Luna

  I'm having an issue with update-manager. Last night, my computer restart suddenly during the update process. Now it won't open and it keep appearing on the notifier with a message warning that an error occurred. The error is the same that is displayed when I try to open it on the terminal: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/bin/update-manager", line 26, in <module> from __future__ import print_function EOFError: EOF read where not expected I've already seen some questions here, but most of them are related to problems with ppas and the source.list file. This seems to be a bug on update-manager itself. I've already tried to remove it and install again, but the problem persists. I also noted another bug: my source-center doesn't open too. The message for it is similar to the other one: Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected Traceback (most recent call last): File "/usr/lib/command-not-found", line 5, in <module> from __future__ import absolute_import, print_function EOFError: EOF read where not expected For now I'm using apt-get update && upgrade for updating and the Synaptic for the source management. But I really would like to fix this stuff. Anyone can help? I'm with Ubuntu 12.10, Gnome-remix, 64-bits.

  Read the article

• Cross Apply Ambiguity

  - by Dave Ballantyne

  Cross apply (and outer apply)  are a very welcome addition to the TSQL language.  However, today after a few hours of head scratching, I have found an simple issue which could cause big big problems. What would you expect from this statement ? select * from sys.objects b join sys.objects a on a.object_id = object_id No prizes for guessing SQL server errors with “Ambiguous column name 'object_id'”. What would you expect from this statement ? Select * from sys.objects a cross apply( Select * from sys.objects b where b.object_id = object_id) as c Surprisingly, perhaps, the result is a cross join of sys.objects.  Well, what happened there ? If you look at the apply statement, within the where clause, only one of the conditions is qualified with a table name.  This meant that is has be interpreted as “b.object_id = b.object_id” causing the cross apply to have no join the the parent sys.objects table and causing the cross join. The fix is , obviously, simple Select * from sys.objects a cross apply( Select * from sys.objects b where b.object_id = a.object_id) as c So why no “Ambiguous column name ” error ?  I’ve raised a connect item on this issue here.

  Read the article

• Frequent Disconnects with an Intel 3945ABG Wireless Card

  - by Alex Forsythe

  I'm brand new to Ubuntu, and I really love it so far, but one issue I have encountered is that my WLAN is disconnecting about every 5-10 minutes. Often times the connection is repaired automatically, but sometimes the network manager will repeatedly reject my encryption key (which of course is correct). Occasionally after a disconnect, the wireless network fails to show up at all. The only way I can solve this seems to be by completely restarting Ubuntu or connecting with a USB wireless adapter. I am using WPA/WPA2 encryption, which I've read can cause problems with network-manager, but I experience the exact same issues with WICD. I should probably note that I've not experienced any of these issues using Windows 7 on my other partition. I have a hunch that there may be a better driver out there for my card, but I have no idea how to go about searching for it or installing it. Any help would be really appreciated! lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric lspci -nnk 09:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 02) Subsystem: Dell Device [1028:0201] Kernel driver in use: tg3 Kernel modules: tg3 0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation Device [8086:1020] Kernel driver in use: iwl3945 Kernel modules: iwl3945 rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

• Google Programmers

  - by seth

  As a soon-to-be software engineer, I have studied some languages during my time in college. I can name C, C++, Java, Scheme, Ruby, PHP, for example. However, one of the main principles in my college (recognized by many as the best in my country) is to teach us how to learn for ourselves and how to search the web when we have a doubt. This leads to a proactive attitude, when I need something, I go get it and this has worked so far for me. Recently, I started wondering though, how much development would I be able to do without internet access. The answer bugged me quite a bit. I know the concept of the languages, mostly I know what to do, but I was amazed by how "slow" things were without having the google to help in the development. The problem was mostly related to specific syntax but it was not without some effort that i solved some of the SPOJ problems in C++. Is this normal? Should I be worried and try to change something in my programming behaviour? UPDATE: I'll give a concrete example. Reading and writing to a file in java. I have done this about a dozen times in my life, yet every time I need to do it, I end up googling "read file java" and refreshing my memory. I completely understand the code, i fully understand what it does. But I am sure, that without google, it would take me a few tries to read and write correctly (if I had to sit in front of the screen with a blank page and write this without consulting any source whatsoever).

  Read the article

• Samba permissions on a Debian server with Fedora client

  - by norova

  I have a Debian server sharing files via Samba. I can access the files via Windows with no problems whatsoever, but when I try to mount the share on a Fedora client using the same credentials I am unable to write to any files. I have proper read access, but no write permissions. Here are the settings for the share from my smb.conf: [lampp] path = /opt/lampp writable = yes browsable = yes I have to assume that it is an issue on the Fedora side of things because accessing the share from Windows works fine. I have also tried mounting via SSHFS with no luck; it also will allow me to read files but not write. However, in Windows, using a program called WebDrive I am able to access the files (essentially via SSHFS) with no issues whatsoever. I have tried setting up NFS but not much luck there either; I'd rather just stick with Samba if possible. Any suggestions?

  Read the article

• Multicasting and multicast address

  - by Zia ur Rahman

  I have confusion about the multicast addresses, I have read an example which is given by. Suppose two applications have been built to send audio over a network. One application accepts and digitizes an audio input stream, and then sends the resulting frame across the network to other application. The second application receives the digitized audio from the network, converts it back to the audio signal and plays the result over a speaker. Unless the two applications use broadcast to send frames, no other computers on the network will receive a copy of the frame. Multicasting provides an excellent solution to the problems of allowing some computers to participate in audio transmission. To use multicasting , a multicast address must be chosen for the audio application. And the receiving application passes the multicast address to the network interface. The interface begins to accept the packets sent to that address. Question: how this multicast address is chosen, how the receiving application knows that the sender using this specific destination address for the audio frames.

  Read the article

• Hyper-V 2012 and P2000 SAS SAN

  - by user155950

  Hi I am having major problems setting up a Hyper-V 2012 cluster on a P2000 SAS SAN. Running System Center VMM 2012 SP1 I am unable to see any storage to create my cluster. Has anyone had experienced anything similar? Under fabric and storage I can't add the P2000, all I can do is use storage spaces in server manager to create a storage pool and virtual disk. This allows me to create a file share which I can add to VMM but I still can't see any disk to create a cluster. I am just about at the point where I want to tear my hair out wipe the servers and stick VMware on them because I know it works as I have set several systems up like this in the past. The Hyper-V servers can see the storage and in server manager on my management machine it seems to know both servers can see the same disk. VMM is running on the same machine and it can't see any disk. Help..... Thanks Mike

  Read the article

• Update failure: failed md5sum validation: sys.vgz

  - by NederWeb

  LS, I have ESXi 4, with all the 2009 updates installed. When i try to update the last firmware update, i receive the following error: Copy of /bootbank/sys.vgz to /tmp/stage/firmware/bank/sys.vgz failed md5sum validation (8:02:31:29.332 cpu1:1787979) warning 20-Jan-10 9:42:02 PM I updated the vmware-tools separatedly, which succeeded. I receive this message if i use the update GUI, but also when using the CLI tool. I haven't got a clue how to solve this, anyone any ideas? Or having similar problems?

  Read the article

• How to limit click'n'drag movement to an area?

  - by Vexille

  I apologize for the somewhat generic title. I'm really don't have much clue about how to accomplish what I'm trying to do, which is making it harder even to research a possible solution. I'm trying to implement a path marker of sorts (maybe there's a most suitable name for it, but this is the best I could come up with). In front of the player there will be a path marker, which will determine how the player will move once he finishes planning his turn. The player may click and drag the marker to the position they choose, but the marker can only be moved within a defined working area (the gray bit). So I'm now stuck with two problems: First of all, how exactly should I define that workable area? I can imagine maybe two vectors that have the player as a starting point to form the workable angle, and maybe those two arcs could come from circles that have their center where the player is, but I definetly don't know how to put this all together. And secondly, after I've defined the area where the marker can be placed, how can I enforce that the marker should only stay within that area? For example, if the player clicks and drags the marker around, it may move freely within the working area, but must not leave the boundaries of the area. So for example, if the player starts dragging the marker upwards, it will move upwards until it hits he end of the working area (first diagram below), but if after that the player starts dragging sideways, the marker must follow the drag while still within the area (second diagram below). I hope this wasn't all too confusing. Thanks, guys.

  Read the article

• What is the best nginx compression gzip level?

  - by Chamnap

  I'm using nginx reverse proxy cache with gzip enabled. However, I got some problems from android applications http requests to my rails json web service. It seems when I turn off reverse proxy cache, it works ok because the response header comes without gzip. Therefore, I think the problem caused from gzip. What is the most appropriate level of gzip compression? gzip on; gzip_http_version 1.0; gzip_vary on; gzip_comp_level 6; gzip_proxied any; gzip_types text/plain text/css text/javascript application/javascript application/json application/x-javascript text/xml application/xml application/xml+rss;

  Read the article

• Slow performance over network (Ubuntu)

  - by Filipe Santos

  i did setup this NodeJs TCP Server and tested it with a message flooder. Just to see how the performance of the server is. While the message throughput is great if i run the server and the message flooder on the same computer (ubuntu), the throughput dramaticaly decreases if i start the server on computer1(ubuntu1) and the message flooder on computer2(also ubuntu). Both PC are on the same network. In fact, they are directly connected to each other. I started searching the internet for reasons and i suppose i need to tune TCP on both Ubuntu-pcs but until now i haven't been successfull at all. Has anyone experienced such problems, or could someone help me out? Thanks Here the flooding code: var net=require('net') var client = net.createConnection(5000, "10.0.0.2") client.addListener("connect", function(){ for(var i = 0; i < 1000; i++) { client.write("message "); } })

  Read the article

• Where is a good place to start to learn about custom caching in .Net

  - by John

  I'm looking to make some performance enhancements to our site, but I'm not sure exactly where to begin. We have some custom object caching, but I think that we can do better. Our Business We aggregate news stories on a news type of web site. We get approximately 500-1000 new stories per week. We have index pages that show various lists of the items and details pages that show the individual stories. Our Current Use case: Getting an Individual Story User makes a request The Data Access Layer(DAL) checks to see if the item is in cache and if item is fresh (15 minutes). If the item is not in cache or is not fresh, retrieve the item from SQL Server, save to cache and return to user. Problems with this approach The pull nature of caching means that users have to pay the waiting cost every time that the cache is refreshed. Once a story is published, it changes infrequently and I think that we should replace the pull model with something better. My initial thoughts My initial thought is that stories should ALL be stored locally in some type of dictionary. (Cache or is there another, better way?). If the story is not found, then make a trip to the database, update the local dictionary and send the item back. Since there may be occasional updates to stories, this should be an entirely process from the user. I watched a video by Brent Ozar, How StackOverflow Scales SQL Server, in which Brent states "the fastest database query is the one that you don't make". Where do I start? At this point, I don't know exactly what the solution is. Is it caching? Is there a better way of using local storage? Do I use a Dictionary, OrderedDictionary, List ? It seems daunting and I'm just looking for some good starting points to learn more about how to do this type of optimization.

  Read the article

• How to enable extended logging for classic asp on IIS7 on Windows 2008 R2

  - by Neil Trodden

  I had to deploy an application that was not written by me onto the above configuration. It is a rather bizarre hybrid of asp.net and classic asp and it's the classic asp that is proving troublesome. The client is having problems with 500 Internal Server Errors appearing and I can see some of these in the logs but I only get the error code and the page name but little else. What I would like to see is the actual error message to at least give me an idea what is going on (or not going on, depending on your point of view) I don't want to display errors in the browser as I don't know the code well enough and this could (for all I know) display some crazy code where the db password is hard-coded into the site.

  Read the article

• Initializing OpenFeint for Android outside the main Application

  - by Ef Es

  I am trying to create a generic C++ bridge to use OpenFeint with Cocos2d-x, which is supposed to be just "add and run" but I am finding problems. OpenFeint is very exquisite when initializing, it requires a Context parameter that MUST be the main Application, in the onCreate method, never the constructor. Also, the main Apps name must be edited into the manifest. I am trying to fix this. So far I have tried to create a new Application that calls my Application to test if just the type is needed, but you do really need the main Android application. I also tried using a handler for a static initialization but I found pretty much the same problem. Has anybody been able to do it? This is my working-but-not-as-intended code snippet public class DerpHurr extends Application{ @Override public void onCreate() { super.onCreate(); initializeOpenFeint("TestApp", "edthedthedthedth", "aeyaetyet", "65462"); } public void initializeOpenFeint(String appname, String key, String secret, String id){ Map<String, Object> options = new HashMap<String, Object>(); options.put(OpenFeintSettings.SettingCloudStorageCompressionStrategy, OpenFeintSettings.CloudStorageCompressionStrategyDefault); OpenFeintSettings settings = new OpenFeintSettings(appname, key, secret, id, options); //RIGHT HERE OpenFeint.initialize(***this***, settings, new OpenFeintDelegate() { }); System.out.println("OpenFeint Started"); } } Manifest <application android:debuggable="true" android:label="@string/app_name" android:name=".DerpHurr">

  Read the article

• What's a good Game development platform for a platformer game with these characteristics?

  - by Joe

  Yes, I know, the best way to make an indie game is to learn to code. I've got some scripting experience, but I want to do worldbuilding with already-existing tools (and communities surrounding those tools), and I've been really impressed with games like An Untitled Story that were made with pre-packaged toolsets at their core, like Game Maker. :) So I'm planning to make my game using either Game Maker or something like it. The basic parameters of my planned game: -2D platformer. -Physics/speed akin to Sonic the Hedgehog. -Large, non-linear world, flowing as seamlessly as possible -- think Super Metroid, but without the forced screen transitions. The first two points have me leaning toward Game Maker -- Plenty of 2D platformers have been made with it, and there are serviceable, openly available Sonic-the-Hedgehog-style physics engines for it that could be adapted to my needs with minimal muss and fuss. But the third makes me antsy -- from what limited information I hear, Game Maker has problems with large levels/boards/screens/whateveryoucallthem, thus necessitating transitions between screens. I want to avoid that if at all possible -- it would, I believe, fundamentally alter the flow of the game. I understand that generally speaking, the more you have loaded into memory the more things are going to chug (especially for a one-size-fits-all game development platform that isn't a model of efficient coding), but I'm hoping there are systems that can un-load objects that are sufficiently far offscreen and thus better produce seamlessness. Any thoughts, people? :) The sooner I can get a basic pre-fab physics engine and world-building program up and running, the sooner I can start prototyping areas and generally tooling around. Should I be looking at Game Maker, or elsewhere? (My current plan is to more-or-less build the game prototype-style, then worry about art and sound at the very end once the damn thing is playable.)

  Read the article

• Right Drag on Mac

  - by Mafuba

  How do you perform a right-click-drag operation on Mac hardware? I know you can right click, but there does not seem to be a right click drag gesture. In my specific case I am using a MacBook Pro, and I am in a Windows environment. The question is more than just theoretical. I ask because there is functionality that uses this gesture, at least in the Windows world. For example, right now I'm trying to do a copy and rename in the TortoiseSVN repository browser. I think there are things you can do with a right drag in graphical editors like Photoshop as well. In windows you get a context menu when you right drag files. For those familiar with the software, I know I can do it in other ways; I'm not looking for workarounds to specific problems.

  Read the article

• Kubuntu 12.04 - DNS Issues

  - by AndrewJesaitis

  Starting yesterday (6/11/12), I've been having many network problems. When requesting a page in chrome, the page hangs on "Sending request" and then will eventually timeout. I'm within a VPN that has it's own DNS server. I've tried to manually set my DNS through the Network-Manager applet and by editing /etc/network/interfaces. Having no luck I unlinked the resolv.conf file and dumped the contents of my old resolv.conf into it. Again having no luck, I deactivated the dnsmasq server in /etc/NetworkManager/NetworkManager.conf by commenting out the dns=dnsmasq. $ cat NetworkManager.conf [main] plugins=ifupdown,keyfile #dns=dnsmasq no-auto-default=D0:67:E5:EA:B6:6B, [ifupdown] managed=false $ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: D0:67:E5:EA:B6:6B Capabilities: Carrier Detect: yes Speed: 1000 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.254.122 Prefix: 24 (255.255.255.0) Gateway: 192.168.254.2 DNS: 192.168.254.1 What is strange is that the network will work fine for a few minutes then start to timeout. A few minutes later it will work again. I'm unable to hit internal or external sites when it is timing out. When I $dig local sites, I receive no answer. I do receive an answer from google.com. At this point, I would usually blame the DNS Server, especially since when I change to Google's DNS server things work. But, I need to use our internal DNS to hit our internal sites. Nobody else is having issues and they are all using DHCP. This group includes one user who is using 11.04. At this point, I'm at a loss for what to do, so any help would be appreciated.

  Read the article

• Firefox 4 is displaying all text as "bold"

  - by Mateo

  I installed Firefox 4 this morning excited to checkout some of the new HTML 5 features that have been implemented and found that all text was displayed in a bold font. Here is the comparison with what Firefox 4 is displaying on my machine and Chrome. It is getting really annoying. So far I've... Emptied the cache/history/etc. Re-installed the various core fonts (Arial, Courier, Times New Roman, etc.) Checked the font defaults in FF4. The interesting part to me is that I had FF3.6x on this machine with no problems whatsoever and now this. Any ideas? System Description Windows 7 (x64) Update I just found out that this is happening in IE9 (final) as well. Must be something with the system fonts. Like I said before, this wasn't happening pre-FF4.

  Read the article

• Not working WEP key in Ubuntu

  - by stupid-idiot

  This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

  Read the article

• How to tell Windows 7 to ignore a default gateway

  - by zildjohn01

  I currently have 2 network cards in my PC -- one connected to an internal network on a router with a disconnected WAN port (10.x.x.x), and one connected to the internet through a consumer router (192.168.0.x). Windows seems to recognize them correctly (my "Network and Sharing Center" lists them as "No Internet" and "Internet" respectively), however when I try browsing the internet it always tries the internal network's default gateway, rather than the one with internet access. Trying to ping a website results in "Reply from 10.0.0.1: Destination net unreachable.". A simple "route delete 0.0.0.0 mask 0.0.0.0 10.0.0.1" fixes the problems, but they return upon reboot, or upon renewing my IP. Is there any way to tell Windows to ignore one NIC's default gateway, or to at least give them priorities?

  Read the article

• taskmgr.exe - Wrong Volume

  - by bcasp

  The other day my girlfriend used my computer to use one of those additional resource CD's that come with text books. This particular CD worked by acting like what seemed like a web server that hosted a site that the student is supposed to use (cgi-bin, python scripts...the whole deal). Today, I opened task manager to shut down some rogue IE's and got the following in an error popup with the title taskmgr.exe - Wrong Volume and Cancel/Try Again/Continue buttons: The wrong volume is in the drive. Please insert volume DosageCalc into drive D: (FYI: DosageCalc = nursing student) Clicking Cancel or Continue lets me continue to task manager. The CD hasn't been in the drive for days and I've used it since then with no problems. Where could task manager be holding onto this reference? My guess would be the registry somewhere...but I don't even know where to begin looking.

  Read the article

< Previous Page | 274 275 276 277 278 279 280 281 282 283 284 285  | Next Page >