Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 28/590 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Setting up virtualbox for outside access

  - by Morgan Green

  I have a computer running a server that my subdomain on my shared hosting account points to. IE subdomain.mydomain.org goes to my home server. Now then; what I'm wanting to do is be able to access my VirtualBox servers through that subdomain and a different port. E.G Ubuntu Virtual Box Server 1 Username:Ubuntuhost1 Password:MyUbuntuHost1 Port:4000 Internal IP: 192.168.1.60 External IP: 24.29.138.45 Ubuntu Virtual Box Server 2 Username:UbuntuHost2 Password:MyUbuntuHost2 Port:4001 Internal IP: 192.168.1.61 External IP: 24.29.138.45 Now I want to be able to access RDP number 1 through Port 4000, but if I access Port 4001 it will connect to the server on port 4001; both using the same subdomain. The next issue is the fact that even though I know what the IP addresses are on the router for the virtualbox hosts through ifconfig it doesn't change the fact that they don't show up on the router. If anyone knows how to configure this to work please help me out because I've been racking my brain to the highest extent I can. Alright; here's an edit to clarify more; Sorry. My ports on the router are edited to forward Port 4000 on Internal IP 192.168.1.63 (My Ubuntu Internal IP address) Now when I go to my Router Home Page my VirtualBox Internal IP Address doesn't show on the attached device listings, so I set up port forwarding anyways to the VirtualBox Internal IP. My end goal is when I connect to mydomain.org and I connect through port 3389 it takes me to my host computers server, but if I put in mydomain.org and go through port 4000 it's going to redirect to my VirtualBox server; Is this even possible? Sorry; I'm trying to clarify the most I think I can I just don't know how else to explain my issue.

  Read the article

• Setting up 2 external monitors on a laptop with VGA splitter

  - by mike

  I have a laptop with a graphics card that supports 2 displays. I would like to know the easiest way to set it up so I can close my laptop lid and use 2 external monitors (unique displays). I use it primarily for office applications and video and want a quality, clear picture. The laptop has 1 VGA port and I have 2 24" 1920x1200 monitors that have VGA and DVI ports. So a few questions: Can I just use a VGA splitter? (seen mixed feedback on this) Would it a VGA to 2 DVI splitter give a better picture quality? (if it exists) Would I be better upgrading laptop to one with 2 digital ports ( I just see a lot with VGA and HDMI though) specs: Model: Toshiba Satellite C675-S106 (Windows 7) Graphics Card: Intel HD Graphics 3000 (supports 2 displays) Processor: Intel Core i3-2350M

  Read the article

• Setting up a lab with Windows 2003 server and windows 7 clients

  - by Tathagata

  We are overhauling a lab with new machines with Windows 7 (as clients - around 150 of them). In the current infrastructure we have students logging in using a generic student id (as having individual student accounts doesn't really serve any additional purpose). This account, as you would imagine is a locked down one that can run a few (age old) softwares required by students in the class. Currently, the individual machines have XP images created by BartPE. What should be an ideal infrastructure design to cater to such a need with Windows Server 2003 and Windows 7 clients? It would be great if you can give me pointers to what concepts and background I need to have (like GPO), any design guidelines, best practices?

  Read the article

• Setting charging limit on MBP?

  - by Giannis

  Is it possible to tweak settings so that the battery will only charge up to 90% -95% and then use power adapter to run ? A friend told me he was able to set such limits on his non-mac PC so I was hoping there would be a way to do it. From reading I have done online it appears this is better than having a 100% battery most of the time. I have an MBP 13" 2012 running latest version of OSX ML(10.8.2).

  Read the article

• Setting up vsftpd, hangs on list command

  - by Victor

  I installed vsftpd and configured it. When I try to connect to the ftp server using Transmit, it manages to connect but hangs on Listing "/" Then, I get a message stating: Could not retrieve file listing for “/”. Control connection timed out. Does it have anything to do with my iptables? My rules are as listed: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT

  Read the article

• Setting up self signed cert and CA [plesk / linux]

  - by microchasm

  I'm about ready to give up and do a clean wipe of this machine and start over with ISPConfig or some other variant. I installed Plesk on this machine to help with some of the handiwork. It is the free version (single domain); I don't need it for much. It's nice, though, to use to set up db's email, etc. Anyway, I would like to set it up as a CA (which I can add to users' trusted root servers to alleviate those warnings). It seems like Plesk does all it can to obfuscate where things are. Despite trying to find the conf files, and crt/pem/key etc. I am (5 hours later) now left with a machine that won't even get to the ssl page. The browser will sit there, until a 'connection reset' error comes up. In error_log, I get messages saying CN doesn't match server name -- which it does. ssl_error_log: [Thu May 13 16:02:14 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) [Thu May 13 16:12:19 2010] [warn] RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?) not very helpful. If anyone has any experience, and/or recommendations (including other software), I'd be much obliged. NB RHEL5; 1 domain, 3 subdomains; everything local only. Thanks.

  Read the article

• Publishing and setting permissions to a Linux share to AD

  - by blsub6

  I have a Linux share that I want to publish to users on my Active Directory domain. I'd like to be able to control the permissions to access that share using security groups. So say I have a share named "Share" on my Linux machine named "Linux" with IP address 192.168.1.2. I publish \\192.168.1.2\Share in AD and make it so that only people who are part of the "IT" security group can access it. What's to stop anyone who's not in the "IT" security group from just going to explorer and typing in \\192.168.1.2\Share or \\Linux\Share into their Explorer to access this share? Do I need to set up permissions on the Linux file server?

  Read the article

• am i properly setting this up correctly? [closed]

  - by codrgii

  i'm having a problem with mod_security. I have installed it, but i am not sure on how to make the rules for it, i want the rules to prevent all major attacks like cross site scripting, remote file inclusion etc i'm using mod security 2.6.5, apache 2.2 with php 5.3.10. i went to this site http://www.gotroot.com/mod_security+rules but i am not sure how to set up the rules or which one to use, or how i add them properly in httpd.conf, would someone please explain the process and also recommend rules for someone in my position?

  Read the article

• Setting Up SNI with Apache 2.2.12 and openssl

  - by CCG121

  I am running Apache 2.2.12 and openssl 0.9.8g all of my Apache are in /etc/apache2/sites-available/default and i have 2 domains with certificates www.site.com & d7.site.com my <VirtualHost *:443> DocumentRoot /var/www/domain.com ServerAdmin [email protected] ServerName www.name.tld SSLStrictSNIVHostCheck off SSLVerifyClient None SSLEngine on SSLCertificateFile /var/www/sslcerts/name.tld/www_name_tld.crt SSLCertificateKeyFile /var/www/sslcerts/name.tld/private.key </VirtualHost> <VirtualHost *:443> DocumentRoot /var/www/d7 ServerAdmin [email protected] ServerName d7.domain.tld SSLStrictSNIVHostCheck off SSLVerifyClient None SSLEngine on SSLCertificateFile /var/www/sslcerts/d7.domain.tld/server.crt SSLCertificateKeyFile /var/www/sslcerts/d7.domain.tld/private.key </VirtualHost>

  Read the article

• Benefits of setting a webserver in Linux

  - by John Kent

  I wonder what main purposes and benefits can one get after he sets up a webserver running on Linux installed on a VM which is hosted by Windows and that this webserver can be used as a local host for windows ? That is, I have java application that is a webserver made on Linux, I set up the virtual machine for the windows client apps to listen to its (Linux)'s local IP address and port e.g 192.168.50.50:11111 When my webserver runs, I can use http://192.168.50.50/ as the windows's localhost address (instead of 127.0.0.1 as I usually do). Thank you

  Read the article

• Setting Up Local Repository with TortoiseSVN in Windows

  - by Teno

  I'm trying to set up a local repository so that all commitments are copied to the local destination, not a remote server. I followed this tutorial. What I did. Created a folder named "SVN_Repo" under C:\Documents and Settings[user-name]\My Documents\ Right clicked on the folder and chose TortoiseSVN -> Create repository here Clicked OK in the pop up dialog asking whether to create a directory structure. Created a folder named Repos for the local destination, under E:\ Right clicked on the SVN_Repo folder and chose SVN Checkout... Typed file:///E:\repos in the URL of repository field and clicked the OK button. What I got: Checkout from file:///E:/repos, revision HEAD, Fully recursive, Externals included Unable to connect to a repository at URL 'file:///E:/repos' Unable to open an ra_local session to URL Unable to open repository 'file:///E:/repos' I must be doing something wrong. Could somebody point it out? Thanks.

  Read the article

• best practices for setting up a new windows 2008 R2 server with ec2 AWS

  - by Alex

  Can someone comment what they would add to the following list of SOP in terms of best practices? This is being set up on AWS, and then after further testing, back in our datacenter. Standard Operation Procedure (SOP): Installation Part: 2 - Installation of Software Components in Windows 2008 R2 (Updated). Step: 1 Logon to the host through Remote Desktop. Strp: 2 Open Server Manager - Server Roles - Install Web Server IIS 7.5 with compatible of IIS 6 features and Management compatibility mode. Step: 3 Open IE/Mozilla to Download the below listed software's and save all installation files to folder called "AWS Server Install Files" for future reference.. Net Framework 2.0 (Download that from internet) Crystal reports for .Net Framework 2.0 (x64) (Download that from internet) SQL Server 2005 (AWS Image) Step: 4 Once all software's saved on local drive, then Install it one by one. Step: 5 Navigate to Desktop folder to install the below listed softwares. Microsoft Asp.net 2.0 AjaxExtention 1.0 (placed on Desktop \Softwares) WebEx recorder. (placed on Desktop \Softwares) Winrar(placed on Desktop \Softwares) Step: 6 Make sure all the software are working fine. Step: 7 Inspect the server once entirely. Step: 8 Logoff & Stop the Instance.

  Read the article

• Setting up port forwarding for web server

  - by Javier Badia

  This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

  Read the article

• Login error in phpMyAdmin, problem setting auth_type in config.inc.php

  - by sergiom

  I'm having a problem accessing phpMyAdmin. A few weeks ago I did succeed configuring it for auth_type = 'cookie', but I still receive an error stating that I should have to set blowfish_secret. That was strange because it was set. So I changed auth_type from cookie to http, but it didn't work. I changed it back to cookie, but it doesn't work anymore. this is the error. phpMyAdmin - Error Cannot start session without errors, please check errors given in your PHP and/or webserver log file and configure your PHP installation properly. this is my C:\wamp\apps\phpmyadmin3.2.0.1\config.inc.php <?php /* Servers configuration */ $i = 0; /* Server: localhost [1] */ $i++; $cfg['Servers'][$i]['verbose'] = 'localhost'; $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['port'] = ''; $cfg['Servers'][$i]['socket'] = ''; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['extension'] = 'mysqli'; $cfg['Servers'][$i]['auth_type'] = 'cookie'; $cfg['Servers'][$i]['user'] = ''; $cfg['Servers'][$i]['password'] = ''; $cfg['Servers'][$i]['AllowNoPassword'] = false; $cfg['Servers'][$i]['blowfish_secret'] = 'this is my passphrase'; /* End of servers configuration */ $cfg['DefaultLang'] = 'en-utf-8'; $cfg['ServerDefault'] = 1; $cfg['UploadDir'] = ''; $cfg['SaveDir'] = ''; ?> I changed the blowfish_secret, since I don't remember the old one, and I deleted the cookies in my browser and restartd all wamp services and the browser. After I enter username and password in the login page I get the error. I've tried searching into the log files, but I'm a newbie and I'm not sure I've searched the right ones. I'm using Wamp server 2.0 that has Apache Version : 2.2.11 PHP Version : 5.3.0 MySQL Version : 5.1.36 phpmyadmin : 3.2.0.1

  Read the article

• Setting up wifi router as a switch for Internet Connection Sharing

  - by William C

  Can my laptop with a 3G connection share its Internet via a Wifi router (Dlink DIR-615)? I turned Internet Connection Sharing on and Windows assigned 192.168.137.1 to my laptop's LAN adapter. Do I connect my laptop to the WAN port or to the LAN port of the router? What should I set as my router's IP address? Do I turn DHCP on my router on? Do I assign 192.168.137.x as static addresses on the other computers? If not, what? Is there anything else I need to set on my router? Thank you!

  Read the article

• Problem with setting cookies from Javascript running on nginx

  - by Aaron T.

  I can't seem to set cookies from the jquery.cookies plugin when running on nginx. My configuration is pretty standard, I'm just wondering if anyone else has had the same problem and knows how to fix it. I'm new to nginx, so take it easy on me :)

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• Setting up Debian squirrelmail

  - by Muazam

  I'm new to networking. I need to set up a email server and I also need to create an email address. ex. [email protected] I've installed squirrelmail and dovecot. http://www.mydomain.com/squirrelmail/src/login.php Shows a log in screen, but when I try to log in I get this error: Error connecting to IMAP server: 127.0.0.1. 111 : Connection refused I have no experience with squirrelmail and dovecote. Anyone can help me out, I really appreciate it. Thanks!

  Read the article

• Setting up podcasting for a non-tech user

  - by Force Flow

  I have a user who wants to start making podcasts, but they only have basic skills when it comes to technology. So, I was trying to get a process together that would be easy for them to follow. To upload files (the mp3's and rss feed files), I have an explorer shortcut for their FTP space. To record the podcast, I was going to either use audacity or PodProducer. For the RSS feed, I was looking for a podcast RSS generator of some sort. In my search for this, I've come across a lot of dead links and a lot of paid tools, so I haven't come up with anything too useful. Is there a free, reliable webservice or windows-based tool available that folks like to use?

  Read the article

• Setting up Gitosis, where to create the repos?

  - by ReynierPM

  I'm trying to setup Gitosis on CentOS 6.2 but have some doubts/problems about it. I read this docs here, here and here but it's unclear to me where to configure where repositories are created. My server has a partition /data where I create a directory and called /gitrepos. I want all the repos created under that directory. By default if I run the command: gitosis-init < /home/reynierpm/reynierpm.pub I get this Initialized empty Git repository in /root/repositories/gitosis-admin.git/ Reinitialized existing Git repository in /root/repositories/gitosis-admin.git/ And I want this repos created under /data/gitrepos, any help? Thanks in advance

  Read the article

• How to get started setting up IP security cameras

  - by dave

  I have just finished renovating my house. As part of the job, I have cat6 cable run through the house, including two external plugs. All cables terminate in the same location. My rough plan is to plug two IP cameras to monitor the front and rear, run POE from a central router to the two external cameras, plug my PC into the same router and run magic software X. Any machine plugged into the router or wirelessly connection should then be able to get a live feed and alerts based on motion detection. That's the plan, but I'm not sure how possible it is. What hardware to get and what monitoring software to get. Has anyone does something similar? What were your experiences?

  Read the article

• tomcat 6 start mode setting for production [windows]

  - by Ryan Fernandes

  Tomcat 6 (as a windows service) seems to have a 'Start Mode' with options of 'java, jvm or exe' which can be set via the Tomcat Monitor (system tray icon). if I set this to 'java', I can see a forked 'java.exe' process for tomcat, if I chose either of the other two, I dont see a separate process. Anyway, would like to know if anyone has any information about what these settings mean and which one would be most appropriate in production.

  Read the article

• Setting up Windows 2008 VPN Server

  - by Ivan Vovnenko

  Hi, i'm trying to setup windows 2008 server as a L2TP/IPSEC VPN server (PPTP is not secure), to receive windows (xp+) and Mac connections. The win2008 is behind the router. Can anyone provide easy step-by-step instructions? I tries several tutorial but no luck. Also VPN clients setup both on mac and windows would be very helpful. Thanks in advance.

  Read the article

• Setting up home DNS with Ubuntu Server

  - by Zeophlite

  I have a webserver (with static IP 192.168.1.5), and I want to have my machines on my local network to be able to access it without modifying /etc/hosts (or equivalent for Windows/OSX). My router has Primary DNS server 192.168.1.5 Secondary DNS server 8.8.8.8 (Google's public DNS). Nginx is set up to server websites externally as *.example.com Internally, I want *.example.local to point to the server. My webserver has BIND9 installed, but I'm unsure of the settings. I've been through various contradicting tutorials, and so most of my settings have been clobbered. I've stripped out the lines which I'm confused about. The tutorials I looked at are http://tech.surveypoint.com/blog/installing-a-local-dns-server-behind-a-hardware-router/ and http://ubuntuforums.org/showthread.php?t=236093 . They mostly differ on what should be put in /etc/bind/zones/db.example.local and /etc/bind/zones/db.192, so I've left the conflicting lines out below. Can someone suggest what the correct lines are to give my above behaviour (namely *.example.local pointing to 192.168.1.5)? /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.254 /etc/hostname avalon /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local zone "example.local" { type master; file "/etc/bind/zones/db.example.local"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.192"; }; /etc/bind/zones/db.example.local $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 5 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL /etc/bind/zones/db.192 $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 4 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; What do I need to add to the above files so that on a laptop on the internal network, I can type in webapp.example.local, and be served by my webserver? EDIT I made several changes to the above files on the webserver. /etc/network/interfaces (end of file) dns-nameservers 127.0.0.1 dns-search example.local /etc/bind/zones/db.example.local (end of file) @ IN NS avalon.example.local. @ IN A 192.168.1.5 avalon IN A 192.168.1.5 webapp IN A 192.168.1.5 www IN CNAME 192.168.1.5 /etc/bind/zones/db.192 (end of file) IN NS avalon.example.local. 73 IN PTR avalon.example.local. As a side note, my spare Win7 machine was able to connect directly to webapp.example.local, but for a Ubuntu 13.10 machine, I had to make the following changes as well (not on the webserver, but on a separate machine): /etc/nsswitch.conf before hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 after hosts: files dns /etc/NetworkManager/NetworkManager.conf before dns=dnsmasq after #dns=dnsmasq The issue remains that its not wildcard DNS, and so I have to add entries to /etc/bind/zones/db.example.local for webapp1, webapp2, ...

  Read the article

• Setting a wireless access point on Ubuntu server 11.10

  - by Solignis

  I am trying to setup a wifi access point with my Ubuntu server. I have managed to get my phone to connect the wireless and now it get a DHCP lease. Though it still cannot ping out or get pinged by anything on my network. I am prety sure my problem is iptables, but I not sure what would be wrong. Here is what my rules look like. (The ones pertaining to the bridge interface) # Allow traffic to / from wireless bridge interface iptables -A INPUT -i br0 -j ACCEPT iptables -A OUTPUT -o br0 -j ACCEPT I am guessing my rules are a little lean, the bridge exists on the same subnet as everything else on my network, I am using a 10.0.0.0/24 subnet. EDIT Oh yeah I should mention also, when I do a ping test, I get Destination Host Unreachable as the error.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >