Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 28/286 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Can't install the wireless driver in HP Pavilion dv2419us

    - by maqtanim
    I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

    Read the article

  • Wireless drivers

    - by Kencer
    The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • DD-WRT Router acting as a Switch and Wi-Fi AP

    - by dotnetchris
    Recently I upgraded to Comcast Business and their modem has a built-in router so I took off my DD-WRT router and moved to a location in my home where I needed more ports and Wi-Fi (preferably without running new Ethernet cables since it's 50-100 foot run through floor and ceilings). I have my network cable from my Comcast modem going into Port 1 of my DD-WRT router with Port 2 and 3 being networked PCs. I have DD-WRT setup as a DHCP forwarder with the firewall disabled. This lets my all of my devices access the network fine. Is the correct the way to do this? Or is this a less optimal solution and it should be done in a slightly different way?

    Read the article

  • Why did my Cisco router hang?

    - by Mike Pennington
    We have a Cisco 1841 in our storage IDF that was originally running a 12.4(1) IP-BASE image; I wanted to upgrade to an advancedservicesk9-mz image, but the flash did not have enough space, so I deleted the running image. Later I tried inserting a larger CF from a Catalyst4500, which crashed the 1841 router (now without a bootable image). Using another 1800 series router, I loaded the 12.4(25g) advancedservicesk9 image and verified the image checksums. I set the confreg to 0x2102 from rommon and booted the new image; however the 1841 now hangs indefinitely after printing the IOS export control banner. I have tried four other images, all with the same results. What is wrong with this router? UPDATE 1: I tried loading images from a FAT16-formatted USB, but this didn't work either. I also tried tftpdnld from rommon, but got a get_mac_address(): Search T_IDPROM_MACADDR (0xc3) failed Illegal MAC address. error and the file would not load.

    Read the article

  • Unable to access router even though internet works

    - by Tom Kaufmann
    I had access to my router and my internet was also working fine, but I was trying to do a port forward of 80 to my local machine and in the process I made a mistake. I went into Remote Management and for port 80 there were a few options like LAN, WAN, All. I accidently clicked "all" and then clicked "Disable". The problem is that I am no more able to access my router using 192.168.1.1, although my internet works. If I do a ping 192.168.1.1 I am able to receive the response, but I am no longer able to browse the internet. How can I fix this issue? I am using a zyxel p-660hn-t1a router given by my ISP.

    Read the article

  • Buffalo wireless router

    - by Walter White
    Hi all, I have a Buffalo wireless router and it appears to work fine, for the most part. However, printing out some debug information, I noticed that the Mode is reported as unknown/bug. In the DD-WRT configuration, I have selected AP which should be Master. I was having a problem earlier with my ESSID being a bunch of weird characters. I re-entered it and restarted the router and now the ESSID is correct. I tried re-entering the configuration for the router and it still is reported back as Unknown/bug via iwlist wlan0 scanning. Any ideas? Walter

    Read the article

  • Edimax wireless router is not providing DNS services correctly

    - by Nathan Fellman
    I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

    Read the article

  • DNS server at router level vs. computer level

    - by Craig
    I've three questions. Is it better/faster/optimal to set up your server's preferred and alternate DNS servers in your OS's network settings or in your router settings? Will it cause problems if it is set up in both places, both pointing to the same IPs? I am running Windows and I have my network assign a static IP to one of my computers. This doesn't allow me to obtain the DNS server addresses from my router automatically. Is there an IP I can put in that will cause it to take the DNS server addresses from the router?

    Read the article

  • How to open ports on router for better torrent performance

    - by Mehper C. Palavuzlar
    I've been using utorrent to download and upload torrents for a long time. Recently someone told me that I need to open port(s) for utorrent from my router settings for better downloading and uploading performance. Is it true? If yes, how can I do that? My utorrent version: 2.0 and the port used for incoming connections: 61829. My router: Yaksu S200 ADSL router modem and I can reach its settings via web interface. I looked at the settings but they seem a bit complicated to me. Other info you may need to know: I have dynamic IP. I'm using Win7 x64.

    Read the article

  • LinkSys router suddenly cannot get an IP address

    - by user43208
    I have a linksys router WRT54G2 connected to a cable broadband. Just last week, everything was working perfectly - I would be able to connect my laptop to the internet using WiFi. However, starting last week, I suddenly lost my internet connection. At first I thought something was wrong with my ISP. However, when I tried connecting the cable directly to my laptop, I found out that there was no problem with the internet connection after all. It appears that it is only my router that cannot get IP address. I have already tried cloning my MAC address and reconfiguring my router using the setup CD, but nothing worked. What could be the problem here? Thank you. Regards, Erwin

    Read the article

  • Restore access to Cisco Connect after changing router settings

    - by StasM
    I have recently bought Cisco Valet Plus (M20) wireless router (which I recognize now was a mistake, but nevermind). It has two setup options - Cisco Connect software and web-based setup. Cisco Connect software allows changing very small set of settings, web-based setup allows access to almost all settings, except settings for guest network. The problem is that when I use web-based setup, Cisco Connect after some changes refuses to talk to the router, so I can't change guest settings anymore (since web interface doesn't allow to change them). It must be because of some config parameter not matching or some password set wrong - but I don't know where Cisco Connect stores them. So, does anybody have any idea how to make Cisco Connect talk to the router again once I changed the settings through the web interface?

    Read the article

  • Facebook doesn't work on computer, but work on mobile device, both use the same router

    - by sasa
    I have a very strange problem and I'm thinking that can be problem with dns or something similar, but not sure and don't know how to solve. My computer is connected to router and every site works fine except facebook (Chrome and Firefox). Chrome shows "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset." But, on mobile device witch is connected to the same router facebook works fine (Fb application and Delphin browser). Pinging facebook works fine. Clearing cookies and cache didn't help. Also, I performed antivirus and antimalware scan and there is nothing. What can be a problem? Update: I'm also connect notebook on that wifi router, and on it works fine. nslookup facebook.com Server: UnKnown Address: 192.168.1.1 Non-authoritative answer: Name: facebook.com Addresses: 2a03:2880:2110:3f01:face:b00c:: 2a03:2880:10:1f02:face:b00c:0:25 2a03:2880:10:8f01:face:b00c:0:25 69.171.224.37 69.171.229.11 69.171.242.11 66.220.149.11 66.220.158.11

    Read the article

  • Port forwarding through a client bridge

    - by Gabe Tanenhaus
    I am having a problem with port forwarding with a client bridge. My main router is a 2wire router from AT&T using their firmware. It is a Router/Modem. In my room, there is a Linksys WRT54GL with DD-WRT on it. I have set up the DD-WRT one as a Client bridge for my PC. I can access the internet on my computer using it but when I try and port forward, the ports stay closed. I am port forwarding on my main router (2wire) and it doesn't work. I have checked online and all I see is that I should only need to forward on the main router since the client bridge has NAT disabled, but it seems to not work that way. Any ideas?

    Read the article

  • Belkin Wireless G router not working on Windows 7

    - by coore
    I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

    Read the article

  • Using a 3g usb dongle as Cisco router access point

    - by beakersoft
    We have an office opening, and we aren't going to have comms into the building when management want the building to open. Our only option (I think) Is to try and hook up a 3/4g dongle to something to act as the access point, and send all the traffic via that. The model of router we use wont support the usb dongle, so we need some sort of 'bridge' My idea was to build a Linux box, plug the dongle into that and then via the Ethernet ports plug the router in. We need the Cisco router in the equation as we create VPN connections over that back to head office. My question is will this work?

    Read the article

  • Data transfer speed to USB storage connected to wifi router very slow

    - by RonakG
    Here is my setup. A Linksys Cisco E3200 wifi router. A MacbookPro running OS X Lion 10.7.4. A Seagate GoFlex 1TB hard drive connected to wifi router via the USB port. When I try to transfer data from my MBP to the HDD, the data transfer rate is very low. I'm getting around 3MB/s write speed. This is very slow compared to the speed I get when HDD is directly connected to the MBP. The HDD is NTFS formatted. And the router provides access to HDD using Samba share. So I connect to the HDD using smb://. What is the limiting factor here affecting the data transfer rate?

    Read the article

  • How to limit router bandwidth?

    - by David
    Hello, Is there a way to configure my (D-Link DIR-615) router to throttle down the allowed bandwidth after a certain amount of bandwidth has been used? For instance, I want my router to operate normally up to 20GB. After 20GB I want the router to limit bandwidth to a fraction of the normal speed (perhaps 1/5th). I live in Canada, so in about a month, everyone is going to be billed based on the amount they used (usage based billing). Instead of the unlimited bandwidth that I am enjoying now, most people will be capped at 25GB and will have to fork out $2/GB of over usage. Thank you in advance for the help.

    Read the article

  • Wireless controllers vs wireless usb hub

    - by David Jensen
    For my htpc i currently only have a steerin wheel as a controller. This is wired and it looks really bad having extended usb wires from the tv to the table. However im thinking of bying some new Gamepads and now comes the question. Should i buy wireless ones or wired and connect them to a wireless usb hub? Having a wireless hub would let me manage my gamepads easily from the couch. A wireless hub also allows me to connect other things that are not input devices from the couch. However im wondering if wireless usb hubs may not be made for input devices in the way that they may not have 100% uptime and probably some delay. Am i right about this?

    Read the article

  • Router won't connect to computer over cable

    - by yyy
    I have a Thompson 784 router that connects to the Internet. It works nicely enough. What is wrong is that I have a shielded Cat 5e cable that goes from my room to the router that's in a another room (~30 metres). Both ends are the same; both ends are done nicely; I've tested it with a cable tester and every wire connects. However, when i connect my computer to my router neither one will find the other. So would anyone be nice and please explain what is wrong. p.s.: I have tried many different cable ends (currently it on standard/A), the cable is tested both ways (as it should be) and yes I'm at my wit's end =(

    Read the article

  • Can't connect to Internet through WiFi, but can with cable

    - by aldy505
    I'm using Windows 7 32-bit, Toshiba Portege laptop. I want to connect to the WiFi, usually I can do that easily. But, I don't know.. maybe when I tried to install a Microsoft Research: Mesh Virtual WiFi that could connect more than 2 wireless networks. I wanna try in connecting both Wireless router and my personal Ad-Hoc. Now, my laptop don't recognize my WiFi, well, I can connect to the WiFi but it says: "Limited access" and doesn't really connect to the internet. But when I plug the LAN cable, it works. I know the problem is in the laptop's wireless connection or in the properties. Any help for this? UPDATE: The IP and DNS settings, I set to automatic, and when I ran diagnostic, Windows tells me that the wireless network adapter is the problem, but they told me to insert the LAN cable, so how to fix the wireless? They didn't tell me how to fix that.

    Read the article

  • Belkin Wireless G router not working on Windows 7

    - by coore
    I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

    Read the article

  • Time Capsule + Ubee Router?

    - by Charlie
    I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Capsule hooked up to it from LAN1 (on the Ubee) to the WAN port on the TC. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TC IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TC says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

    Read the article

  • How to connect another computer to the router

    - by Call Me Dummy
    I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

    Read the article

  • find wireless-repeater ip (router)

    - by Brtrnd
    Really long time ago I set up my dd-wrt router up as a repeater. It works well; in the summer I place it near the garden and I have wifi in the garden. I would like to revisit te settings and see if it would be a good idea to install openvpn. The problem is: I don't remember the ip of the router. I probably followed the setup instructions on the dd wrt wiki. it doesn't show up on the management-console of my main router (a docsis3 modem); it doesn't show up if I do an IP scan of the whole class B; it doesn't show as the gateway when i connect to it (wired or wireless). Any ideas on how I could find the web-interface?

    Read the article

  • WiFi can't connect after suspend

    - by CyberOPS
    I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. After I installed Ubuntu 12.04.1 I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Basically here's what happens: I can see all the networks in my area. When I try to connect to one of them it never connects, it keeps disconnecting. After a little bit it asks for the password again but its already filled in correctly. If I hit okay it will do the exact same thing again. So does anyone know how I can get this fixed? INFO: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (*Not using Wubi*) Wireless Card Driver: iwlwifi UPDATE: I was about to reinstall with the DVD I made with the ISO from the official source but discovered the same issue happens on the disc's Ubuntu preview feature. I still was unable to fix it as before. I also tried the Xubuntu demo, and the same. Re installing the driver hasn't worked either.

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >