Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 281/1359 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

  • How do I access shared folders on Ubuntu server from Mac OS?

    - by Stephen
    I have an old dell desktop running ubuntu 11.04, I also have samba installed on it. I'm trying to access the shared folders on the Ubuntu machine from my Mac, so I go into 'Finder', click on 'Go' and 'Connect to Server'. I type in the ip address of the ubuntu machine smb://xxx.xxx.x.xx and click connect, I can then see the list of shared folders from the ubuntu machine so I know its making a connection. But when I access the 'Music' folder I get an error message stating: There was an error connecting to the server "xxx.xxx.x.xx". Check the server name or IP address, and try again. Any thoughts anyone ? EDIT I have a external hard drive attached to the server, and the folders I'm trying to access are located on that external hard drive. The location of the folder is /media/HD-CELU2/test, so I think the path from Finder should be smb://xxx.xxx.x.xx/media/HD-CELU2/test, but having tested this, I'm still not getting in. P.S. I'm using Samba as I have a Windows machine on my home network as well.

    Read the article

  • Networking works on Live CD but not after installation.

    - by user9054
    Hi Friends, I have got this issue with Ubuntu 10.10. I have been with ubuntu 8.04 and then decided to try out ubuntu 10.10 . I booted with a LiveCD and was able to configure the wireless network painlessly using the livecd, so happily I installed ubuntu 10.10. As soon as ubuntu came up it detected the wireless network and i was able to assign a static IP to eth1 (i dont use DHCP option on my ADSL router) and enter a wap key and use pppoeconf to configure the dialer. The net was on and i was able to surf the net. All hunky dory so far. However on the next boot the fun started . It did not detect the wireless network. I could not see the network manager icon in the systray. I used ifconfig and saw that the entry for eth1 was missing. I used ifup eth1 and it said that eth1 was already up. Then i installed wifi-radar. Wifi-Radar detected the wireless network. I configured wifi-radar for the detected wireless network , set the wap driver as wext and used the manual IP settings. However on clicking connect wifi-radar started looking for a DHCP IP. I cannot understand why wifi-radar is using DHCP when I have specified manual settings. Then I decided to use the wired network to surf the net looking for a solution. So I plugged in the network cable from my modem , configured eth0 , used pppoeconf and connected the net. Then I foolishly decided to reboot my PC. And wonders of wonders , the same problem appeared. I cannot see eth0 in my ifconfig anymore. I used pon and it said something about network error or something. Now my ifconfig shows only lo .Can anybody help me on this. PS : 1) I tried linux mint 10 and had the same issue . on rebooting wireless network was not getting detected. 2) I have made myself the administrator so that there is no issue of rights or anything.

    Read the article

  • Dell N7110 i7 overheats and doesn't boot when anything is plugged into the USB3 port

    - by Kostyantyn
    When i plug in any devices (mouse, keyboard) into usb 3.0 system dell n7110 overheats and fan goes crazy with terrible noise. So i'm using 1 usb 2.0 slot now with a usb hub. It doesn't solve the problem completely but system stays at a low fan rate for a longer time. I've tried to lower CPU frequency, but in my case (DELL INSPIRON N7110 i7 on Linux 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux) CPU was pretty cool (51 C) and still the same horrible fan noise. Looks like there is no such problems with ubuntu 10.04 (but there're some other problems). Ubuntu even doesn't boot if anything is plugged into usb 3.0

    Read the article

  • "Serious errors found HF checking the drive for /home" After Moving /home to external HFSplus partition

    - by Arctic Shadow
    I just installed Mac OS X 10.7 "Lion" and Ubuntu 11.10 on my MacBook Pro. Using these instructions: tuxation.com/creating-home-partition-mac-linux.html . After changing the location of my home folder to the new location, it gives me the error in the title, and my username no longer appears in the login screen. Using the "Other" option with my username seems to make it try to log in, but the screen quickly flashes between blank and a shell before kicking me back to the login screen without notice. I'm trying to share my home folder between Mac OS X and Ubuntu, using an hfsplus partition (unjournaled) between the two. The home partition seems to mount fine as /home, and I am able to modify it under Ubuntu. Below is the line I've added to fstab: /dev/sda3 /home hfsplus defaults 0 1 I should also note that I changed my account's username and home directory location to match this, though I've double checked that and everything seems in order there... Thank you in advance for any assistance. Edit: It seems that the /etc/passwd file didn't have my new home directory's location in it, so I changed that, and I am now able to log into my account, although I am still not listed in the login screen, and my username in the menu on the top right shows up as "[Invalid UTF-8]"...

    Read the article

  • Recipient address rejected: User unknown in local recipient table;

    - by Thufir
    I've gone through the guide for mailman with some difficulty, but seem to be nearly there. I'm able to navigate to the mailman web GUI, create lists and subscribe. I just subscribe my local FQDN, so [email protected] for testing purposes. This FQDN only works on localhost. However, e-mails to the list address, in this case [email protected], are rejected: root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 08:28:43 dur postfix/master[12208]: terminating on signal 15 Aug 28 08:28:44 dur postfix/postfix-script[12322]: starting the Postfix mail system Aug 28 08:28:44 dur postfix/master[12323]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:28:46 dur postfix/postfix-script[12332]: stopping the Postfix mail system Aug 28 08:28:46 dur postfix/master[12323]: terminating on signal 15 Aug 28 08:28:47 dur postfix/postfix-script[12437]: starting the Postfix mail system Aug 28 08:28:47 dur postfix/master[12438]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 08:29:29 dur postfix/smtpd[12460]: connect from localhost[127.0.0.1] Aug 28 08:29:30 dur postfix/smtpd[12460]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in local recipient table; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<dur.bounceme.net> Aug 28 08:29:33 dur postfix/smtpd[12460]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# ll /var/lib/mailman/data/ total 56 drwxrwsr-x 2 root list 4096 Aug 28 08:28 ./ drwxrwsr-x 8 root list 4096 Aug 27 19:58 ../ -rw-r--r-- 1 root list 0 Aug 28 04:36 aliases -rw-r--r-- 1 root list 12288 Aug 28 04:36 aliases.db -rw-r--r-- 1 root list 12288 Aug 28 08:28 aliases.db.db -rw-r----- 1 root list 41 Aug 27 21:04 creator.pw -rw-rw-r-- 1 root list 10 Aug 27 19:58 last_mailman_version -rw-r--r-- 1 root list 14100 Oct 19 2011 sitelist.cfg root@dur:~# root@dur:~# grep alias /etc/postfix/main.cf alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases alias_database = hash:/var/lib/mailman/data/aliases.db #alias_database = hash:/etc/aliases root@dur:~# root@dur:~# postconf -n alias_database = hash:/var/lib/mailman/data/aliases.db alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = $myhostname localhost.$mydomain localhost $mydomain myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.example.com relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# Why is this e-mail rejected? It seems to, maybe be related to the alias_maps and alias_database settings in postfix.

    Read the article

  • How to mount an external HDD?

    - by Slash
    I have Ubuntu Linux 12.04 version the latest right now.I want to mount an external HDD NTFS 1TB.I have followed many guides but still no success.The error I'm getting is this: Failed to read last sector (1953523119): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? Using Storage Device MAnager i get this error:Error mounting: mount exited with exit code 1: helper failed with: mount: only root can mount /dev/sdb1 on /media/Skliros_Diskos {external disk name} When I use sudo fdisk -l, this is the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e0bc6 Device Boot Start End Blocks Id System /dev/sda1 * 2048 618854399 309426176 83 Linux /dev/sda2 618856446 625141759 3142657 5 Extended /dev/sda5 618856448 625141759 3142656 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002093a Device Boot Start End Blocks Id System /dev/sdb1 2048 1953525167 976761560 7 HPFS/NTFS/exFAT

    Read the article

  • Jupiter seems to break multimonitor setup

    - by Philippe
    If Jupiter is in the startup my multimonitor setup will fail. Instead of two separate desktops the monitors will be mirrored, one over the other with the smaller notebook-desktop in the larger screen: After each new log-in I have to reset the Display settings in the "System Settings..." dialogue to two not mirrored screens, the changes don't seem to be saved. Given the the entry from xsession-errors /usr/lib/jupiter/scripts/resolutions: line 42: /var/jupiter/available_resolutions_LVDS: Permission denied I assumed that it's coming from Jupiter. Infact, if Jupiter is removed as startup application the desktop settings are fine. Any idea how to solve that issue?

    Read the article

  • Ubuntu/Xubuntu install freeze

    - by Daniel
    I've been trying to install (dual boot) Ubuntu on my HP PC, Link to my specs (click here) I've tried to install Ubuntu with both USB and DVD, same result. The installer will launch, it will load, but then all will freeze in the middle of the loading. Well, I thought it was something wrong with Ubuntu, so I tried Xubuntu instead. Same thing, the installer will go to the loading screen, but then, it'll just freeze at the point where the "loading cursor" appears. Any help would be very much appreciated!

    Read the article

  • Cannot install gnome extensions from gnome site. No switch appearing in firefox or chrome

    - by Andrew James Adams
    I have installed ubuntu 12.04, and installed gnome3 on my system. I am attempting to download the user theme extensions from extensions.gnome.org, but I can't see this "switch" everyone's talking about. I've tried both chromium and firefox browsers on the site. I found a similar subject here at askUbuntu. I followed the directions but I got a warning about gnome common dependencies. I installed gnome-extensions-common without an error but I still cannot install user-themes, and I can't find the mysterious "switch". Any ideas? Thanks in advance.

    Read the article

  • Recover personal PGP key from old home

    - by Oli
    Many lives ago, I created a GPG key to sign the Ubuntu Code of Conduct on Launchpad. I haven't really used it since. Some time later, I backed up my home and started fresh. That was all back in 2009. I still have the backup but now I'm starting to play around with Quickly and upload things to Launchpad, I could really do with having my PGP key back. I don't really know how the key is organised or where it's stored, but I'd like to recover my old key rather than generate a new one. Any idea where to start?

    Read the article

  • How do I stop icons appearing on the desktop in a particular area?

    - by Seamus
    When I download something to my desktop, or insert a CD or flash drive, the icon appears on my desktop. When I have conky running, the icon sometimes appears in the top right corner, underneath conky; where I can't see it. How do I stop this happening? My .conkyrc is pasted below. I didn't write it all myself, so I'm not entirely sure what I need to change, or what parts are relevant for this particular question... # UBUNTU-CONKY # A comprehensive conky script, configured for use on # Ubuntu / Debian Gnome, without the need for any external scripts. # # Based on conky-jc and the default .conkyrc. # INCLUDES: # - tail of /var/log/messages # - netstat shows number of connections from your computer and application/PID making it. Kill spyware! # # -- Pengo # # Create own window instead of using desktop (required in nautilus) own_window yes own_window_type override own_window_transparent yes own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager # Use double buffering (reduces flicker, may not work for everyone) double_buffer yes # fiddle with window use_spacer right # Use Xft? use_xft yes xftfont DejaVu Sans:size=8 xftalpha 0.8 text_buffer_size 2048 # Update interval in seconds update_interval 3.0 # Minimum size of text area # minimum_size 250 5 # Draw shades? draw_shades no # Text stuff draw_outline no # amplifies text if yes draw_borders no uppercase no # set to yes if you want all text to be in uppercase # Stippled borders? stippled_borders 3 # border margins border_margin 9 # border width border_width 10 # Default colors and also border colors, grey90 == #e5e5e5 default_color grey own_window_colour brown own_window_transparent yes # Text alignment, other possible values are commented #alignment top_left alignment top_right #alignment bottom_left #alignment bottom_right # Gap between borders of screen and text gap_x 10 gap_y 20 # stuff after 'TEXT' will be formatted on screen TEXT $color ${color orange}SYSTEM ${hr 2}$color $nodename $sysname $kernel on $machine ${color orange}CPU ${hr 2}$color ${freq}MHz Load: ${loadavg} Temp: ${acpitemp} $cpubar ${cpugraph 000000 ffffff} NAME ${goto 150}PID ${goto 200}CPU% ${goto 250}MEM% ${top name 1} ${goto 150}${top pid 1} ${goto 200}${top cpu 1} ${goto 250}${top mem 1} ${top name 2} ${goto 150}${top pid 2} ${goto 200}${top cpu 2} ${goto 250}${top mem 2} ${top name 3} ${goto 150}${top pid 3} ${goto 200}${top cpu 3} ${goto 250}${top mem 3} ${top name 4} ${goto 150}${top pid 4} ${goto 200}${top cpu 4} ${goto 250}${top mem 4} ${color orange}MEMORY / DISK ${hr 2}$color RAM: $memperc% ${membar 6}$color Swap: $swapperc% ${swapbar 6}$color Home: ${fs_free_perc /home}% ${fs_bar 6 /}$color Free Space: ${fs_free /home} ${color orange}NETWORK (${addr eth0}) ${hr 2}$color Down: $color${downspeed eth0} k/s ${alignr}Up: ${upspeed eth0} k/s ${downspeedgraph eth0 25,140 000000 ff0000} ${alignr}${upspeedgraph eth0 25,140 000000 00ff00}$color Total: ${totaldown eth0} ${alignr}Total: ${totalup eth0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} ${color orange}WIRELESS (${addr wlan0}) ${hr 2}$color Down: $color${downspeed wlan0} k/s ${alignr}Up: ${upspeed wlan0} k/s ${downspeedgraph wlan0 25,140 000000 ff0000} ${alignr}${upspeedgraph wlan0 25,140 000000 00ff00}$color Total: ${totaldown wlan0} ${alignr}Total: ${totalup wlan0} ${execi 30 netstat -ept | grep ESTAB | awk '{print $9}' | cut -d: -f1 | sort | uniq -c | sort -nr} Conky solutions have been offered, but perhaps these aren't the best way of approaching it. What I really want is to stop icons even appearing in that part of the desktop window: that is, I want to make part of the desktop real estate "off-limits" to new icons appearing on the desktop.

    Read the article

  • Cannot set monitor to native resolution

    - by S B
    problem is similar to so many other users, but solutions found do not work. Background: Fresh install of 12.04 (completely updated) on a Fit-PC2 (specs). Read in several places that the new 3.X kernel that 12.04 runs on has a new psb_gfx driver which supports the gma500 graphics card (poulsbo chipset). All's pretty much working (there are some glitches which are documented, so I won't raise them here), except for the screen resolution. My native monitor resolution is 1920X1080, but all I get is 1024x768. Output running xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* Although I read that Ubuntu does not come with an xorg.conf file anymore, I also tried running sudo X :1 -configure, and here's the end of the output: Number of created screens does not match number of detected devices. Configuration failed. When I look in the xorg.conf.new file created in my home directory, it seems that for some reason X thinks I have two screens. Don't know what to do with that. Ideas anyone? Thanks for your time.

    Read the article

  • Use Network-Manager to Connect to a wifi Access Point on the command-line

    - by Stefano Palazzo
    I'd like to connect to a wireless access point from the command-line. ideally, I'd only need the name of the AP. But the hardware-address would work as well. I know I can use nmcli to connect to a managed network connection, but in my case, the access point may not be configured for Network-Manager yet (See the difference between the output of nm-tool and nmcli con). Example output of nmcli: Auto pwln 3a3d62b1-bbdf-4f76-b4d2-c211fd5cfb03 802-11-wireless [...] Wired Network aa586921-accf-4932-98c4-c873c310f08e 802-3-ethernet [...] Cisco-UDP Uni 7f94847b-04dc-40b7-9955-5246fb77cc65 vpn [...] T-mobile (D1) 867f345a-cbbf-4bd4-b883-a5e5ae0932f0 gsm [...] Example output of nm-tool: State: connected - Device: eth1 [Auto pwln] ---------------------------------------------------- [...] Wireless Access Points (* = current AP) *pwln: Infra, [...], Freq 2472 MHz, Rate 54 Mb/s, Strength 80 WPA WPA2 WLAN: Infra, [...], Freq 2422 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 [...] How do I connect to an access point that may or may not be known to NM? Extra: Finding out if the connection needs a pass-phrase, and submitting it on the command-line as well would be great too (that is to say It'd be nice if network-manager wouldn't pop open any keyring dialogues or errors on the gui)

    Read the article

  • How do I stop my ethernet network connection from dropping?

    - by Sean Hill
    My ethernet-based network connection doesn't stay up consistently. I'm running a ping against the gateway and it will: Work for a minute Freeze, time out, or give multi-second response times Repeat If it's stuck and I disable/enable networking through the network manager applet everything will work fine again for a minute. After 280 packets transmitted I'm getting 41% packet loss. I've tried a different cable and connection to the gateway but this had no effect. The distance to the gateway is just about 3 feet. Seems to work fine if I switch over to Windows, but Ubuntu is my main OS and I can't even use it right now as I depend on the network. My setup... OS: Ubuntu 11.04, dual-booting Windows 7 Mobo: Gigabyte Z68X-UD4-B3 CPU: Intel Core i7 2600K Edit A little clarification... Network Manager is still showing me as connected, but I am unable to reach to gateway or anything beyond. At no point does NM suggest the connection is lost and calling ifconfig shows that I still have an IP address. I tried connecting to a different gateway with a different cable and the same problem arises. As requested: lspci | grep -i eth 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) dmesg | tail -f [ 14.024709] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.026443] EXT4-fs (sda7): re-mounted. Opts: commit=0 [ 14.176101] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. [ 23.917731] eth0: no IPv6 routers present [ 726.109697] r8169 0000:07:00.0: eth0: link up [ 733.169494] r8169 0000:07:00.0: eth0: link up [ 753.930119] r8169 0000:07:00.0: eth0: link up [ 880.787332] r8169 0000:07:00.0: eth0: link up [ 1159.161283] r8169 0000:07:00.0: eth0: link up [ 1406.623550] r8169 0000:07:00.0: eth0: link up Edit @roland-taylor: Network is always available under Windows. Pings do not timeout, applications do not complain of no network availability, large downloads are not interrupted or slowed.

    Read the article

  • How to force a new Notification in notify-osd to show up without waiting for the earlier one to exit?

    - by Nirmik
    I have made a script(and a .desktop shortcut leading to this script) for starting and stoping xampp... It checks the status of xampp and accordingly either starts or stops xampp. Now i have assigned a notification as soon as the script is started to display "Starting xampp..." or "Stopping xampp..." and then when xampp is started or stopped,it displays "Xampp started..." or "Xampp stopped..." I've used notify-send to show notification as seen in the script below Now the thing is that here,the second notification waits for the 1st one to disappear and then pops up even if xampp has started/stopped. I want the new notification to appear immediately by forcing the earlier one to exit before the completion of its life-cycle. This can be seen to take plce when you activate/deactivate wireless/networking immediately... For example the "Wireless enabled" comes up on selecting enable wireless and if you immediately select disable wireless,the "Wireless disabled" notification comes up without waiting for "Wireless enabled" notification to complete its life-cycle. So how do i achieve this? #!/bin/sh SERVICE='proftpd' if ps ax | grep -v grep | grep $SERVICE /dev/null then notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Stopping XAMPP..." && gksudo /opt/lampp/lampp stop && notify-send -i /opt/lampp/htdocs/xampp/img/logo- small.gif "XAMPP Stoped." else notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "Starting XAMPP..." && gksudo /opt/lampp/lampp start && notify-send -i /opt/lampp/htdocs/xampp/img/logo-small.gif "XAMPP Started." fi On the man page for notify-send I found --urgency=LEVEL or -u where levels are low, normal, critical. Is this of any use? making it critical? Also I tried it with the command- notify-send -u=critical"Testing" but that dint work...it gives the error- Unknown urgency criticalTesting specified. Known urgency levels: low, normal, critical. or if I give the command notify-send -u=LOW"Testing" it gives me error missing argument to -u Any relation??

    Read the article

  • How do I configure sound with PulseAudio and Multiseat?

    - by Anthony
    In the spirit of full disclosure, i just posted this question to the ubuntu forums, but i figure more heads working on it couldn't hurt. I have a multi-seat setup working quite well. Hot plugging input devices works as expected and such. The only issue I am still not able to resolve is getting the audio for each seat. Here is a summary of my attempts at getting audio to work: Make ~/.pulse/default.pa dynamically configured based on which $DISPLAY the user logs in at. See this pastebin for the details. Load pulseaudio as a system-wide instance. Couldn't get this to work. None of the audio hardware was accessible to the users. Use udev rules to mark seats in ConsoleKit. Following udev guidelines found here: http://www.freedesktop.org/wiki/Software/systemd/multiseat I didn't think this would work, although it was "guaranteed" to work by someone in irc.freenode #pulseaudio None of those attempts yielded success, which is why I now turn to the community for help. It is quite possible that the suggested methods work and I just messed some aspect of it up, idk. This is the last piece of the puzzle which is needed before I can go and update the MultiseatX page to include instructions for Ubuntu 12.04. My understandings on the situation: Access to pulseaudio is restricted to the active session as marked by ConsoleKit (something about an ACL). CK can only mark one session as active at a time. This simple little fact of life leads me to believe that the solution should involve pulseaudio being run as a system-wide instance. Each user should connect to the pulse server and be limited to a subset of all the hardware. Maybe each user connects to the pulse server via localhost, idk. I do know that regardless of my attempts and their failed results, I was always able to use sudo aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav to play something to any of the hardware. I'm grasping at straws and am now down to the last few hairs i can pull out of my head. Please, help me figure this out so we can share the wealth. Any additional information needed will be provided at your request.

    Read the article

  • Ubuntu install doesn't recognize kingston SSDnow sv 200 90g

    - by Quique Garcia
    I'm trying install Ubuntu 12.04 on my new Kingston SSD Now SVP200S3/90G, but the installer doesn't list this disk to be installed. However gparted let me do any partitioning operation correctly. I've tryed with Ubuntu Studio and Ubuntu Desktop on different machines: Lenovo ThinkPad T400, Lenovo ThinkStation C20, MoBo ASUS Crosshair V formula. SATA controller in all machines has been set to AHCI and IDE operation and different SATA ports with no luck. The firmware on the SSD has been updated to V.503xxx (latest on kingston page) Any help is appreciated, regards!

    Read the article

  • Ubuntu 11.10 mounting Synology DS212 problems

    - by Vigo
    I Have installed Ubuntu 11.10 and want to mount a synology ds212. I can see the diskstation in de filebrowser (before mounting with nfs) but can not open it. I've tried to mount it with nfs but no succes. Everything should be right at the Synology (nfs is on and maps are selected), and I've added a line in fstab. If I type sudo mount -a I dont't get an error. If I go to the mounted map I can't see anything in it..... What is going wrong? maybe router? Hope someone can help..!

    Read the article

  • Good PPA for ffmpeg

    - by teeks99
    Its annoying that the default ffmpeg in ubuntu's repositories is outdated and hobbled for legal reasons, however, there's a great page on the forums that walks you through building it from scratch: http://ubuntuforums.org/showthread.php?t=786095 (I also add in support for --enable-libdc1394 --enable-libgsm --enable-libopenjpeg --enable-libschroedinger --enable-libspeex when I build, which is nice, but not essential.) Anyway, I'm getting set to setup a computer lab running ubuntu for a multimedia class I'm teaching, and I was wondering if there was PPA out there that did something similar to what is available when building from scratch. The things I absolutely need from it are up-to-date libxvid, libx264, libfaac, and libmp3lame support plus the un-encumbered stuff (vorbis, theora, vpx). Is there a PPA out there that provides something like this?

    Read the article

  • About to smash my keyboard!! Ubuntu 13.1 issues with AMD driver & Audio

    - by DNex
    Let me preface with saying that this is my 2nd day on Linux. I really want to make it work but these issues are driving me up the wall! I've done exhaustive google searches but have not been able to figure anything out. I am on Ubuntu 13.10, my graphics card is AMD Radeon HD4200. My sound card is a realtek HDMI. I've tried downloading and installing both drivers but nothing works. Graphics card: When I run the .run file (from http://www2.ati.com/drivers/legacy/amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip) I get an error. I check the fglrx-install log and it says this: Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.11.0-12-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended. Audio: Since my first install I've had no audio. I've tried everything outlined in this site: http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/ to no avail. I've download the linux drivers from Realtek HDMI audio but have had no luck. Any help would be extremely appreciated.

    Read the article

  • Swap not available on System Monitor

    - by Zaki
    I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

    Read the article

  • malware in ubuntu 13.04

    - by user206189
    I have recently started using Ubuntu 13.04. The other day I found the Firefox browser blocked by malware. The website was from Europol and said that it had blocked the browser and that 'everything' had been encrypted. have uninstalled Firefox. I can still access files but I was wondering how I can eradicate this malware from my laptop. I have tried to install ClamAV, it did not work but the 2 do not have to be related.

    Read the article

  • set proxy for vpn server on ubuntu server 12.4

    - by Morteza Soltanabadiyan
    I have a vpn server with HTTPS, L2TP , OPENVPN , PPTP. i want to set proxy in the server so all connection that comes from vpn clients use the proxy that i set in my server. I made a bash script file for it , but proxy not working. gsettings set org.gnome.system.proxy mode 'manual' gsettings set org.gnome.system.proxy.http enabled true gsettings set org.gnome.system.proxy.http host 'cproxy.anadolu.edu.tr' gsettings set org.gnome.system.proxy.http port 8080 gsettings set org.gnome.system.proxy.http authentication-user 'admin' gsettings set org.gnome.system.proxy.http authentication-password 'admin' gsettings set org.gnome.system.proxy use-same-proxy true export http_proxy=http://admin:[email protected]:8080 export https_proxy=http://admin:[email protected]:8080 export HTTP_PROXY=http://admin:[email protected]:8080 export HTTPS_PROXY=http://admin:[email protected]:8080 Now , I don't know what to do to make a global proxy for server and all vpn clients use it automatically.

    Read the article

  • Item cannot be installed or removed until the package catalogue is repaired

    - by Alex Thorne
    After installing Microsoft Windows Compatibility Layer (meta-package) i receive an error Item cannot be installed or removed until the package catalogue is repaired. Do you want to repair it Ok, I thought... I'll just click repair and be done with it. After doing so I receive another error. The full text reads: installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 212945 files and directories currently installed.) Unpacking libasound2:i386 (from .../libasound2_1.0.25-1ubuntu10_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libasound2_1.0.25-1ubuntu10_i386.deb (--unpack): './usr/share/alsa/cards/ICE1712.conf' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libasound2_1.0.25-1ubuntu10_i386.deb Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) dpkg: dependency problems prevent configuration of wine1.4-i386:i386: wine1.4-i386:i386 depends on libasound2 (>= 1.0.23); however: Package libasound2:i386 is not installed. dpkg: error processing wine1.4-i386:i386 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine1.4: wine1.4 depends on wine1.4-i386 (= 1.4-0ubuntu4); however: Package wine1.4-i386 is not installed. Package wine1.4-i386:i386 is not configured yet. dpkg: error processing wine1.4 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine: wine depends on wine1.4; however: Package wine1.4 is not configured yet. dpkg: error processing wine (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine1.4-common: wine1.4-common depends on wine1.4 (= 1.4-0ubuntu4); however: Package wine1.4 is not configured yet. dpkg: error processing wine1.4-common (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine1.4-amd64: wine1.4-amd64 depends on wine1.4-common (= 1.4-0ubuntu4); however: Package wine1.4-common is not configured yet. dpkg: error processing wine1.4-amd64 (--configure): dependency problems - leaving unconfigured So I click OK and now I'm back to previous screen ("Item cannot be installed ...") I click on cancel and go to the red circle on the top right on my screen and try to update from there and receive this error After that I just get thrown these errors So now I can't add or remove any programs on my system. Does anyone have any idea how to fix this?

    Read the article

  • Config import on network-manager-openvpn

    - by Toki Tahmid
    I'm trying to use a free service using the OpenVPN protocol using OpenVPN's GUI module in the network manager. The config worked perfectly well as .ovpn on Windows. The behavior in Windows is such that I ran OpenVPN GUI and chose to connect to this particular VPN. It would then show the activity in the attempt to connect and opens a dialog box for username/password authentication. I've successfully imported all the configurations by changing the file type to .conf and using the import feature in network manager. However, attempting to connect would simply display the network manager's attempting to connect animation, but ultimately end with a notification of connection timing out. No prompt asking for authentication would appear at all, nor can I find any feature to prefix the authentication details. client dev tun proto tcp remote miami.proxpn.com 443 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key cipher BF-CBC keysize 512 comp-lzo verb 4 mute 5 tun-mtu 1500 mssfix 1450 auth-user-pass reneg-sec 0 # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] Needless to say, but I've downloaded all the required packages for setting up OpenVPN connections. By the way, as you can see above, .key and .crt files location are specified to be in the same directory as the config file. After importing the config file, if were to remove them, would it cause any problem? Note, I haven't removed them, so the problem I'm facing is not due to the absence of these files.

    Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >