Search Results

Search found 9900 results on 396 pages for 'hardware combination'.

Page 281/396 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• Intel 82576 Network card

  - by No1_Melman

  I have an Intel dual port pcie NIC card with two 82576 interfaces according to ubuntu 12.04. I run the command sudo lshw -html > /home/melman/Documents/hardware.html and it shows both of the interfaces but they're grayed out?! How can enable them? ifconfig output: bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.100.2 Bcast:192.168.100.255 Mask:255.255.255.0 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr e0:69:95:d1:db:ff inet addr:192.168.10.63 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::e269:95ff:fed1:dbff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2903 errors:0 dropped:0 overruns:0 frame:0 TX packets:2627 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1524738 (1.5 MB) TX bytes:430196 (430.1 KB) Interrupt:20 Memory:f7f00000-f7f20000 eth3 Link encap:Ethernet HWaddr 00:50:b6:50:a7:f9 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:1b:21:6e:99:77 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c00000-f7c20000 eth5 Link encap:Ethernet HWaddr 00:1b:21:6e:99:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Memory:f7c20000-f7c40000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:246 errors:0 dropped:0 overruns:0 frame:0 TX packets:246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:17584 (17.5 KB) TX bytes:17584 (17.5 KB)

  Read the article

• Acceptable sound quality: stereo needed for an Android game?

  - by Thomas Calc

  I have various simple short sound effects (damage sound, dying sound, thunderbolt, fanfare, breaking) for a game that is developed for Android currently. I use OGG files: 96kbps VBR, 44.1KHz, 2 channels (that means stereo, right?). I read the other stackexchange topics about "acceptable sound quality", but they're too general, address too many things. My experience is that even with 80kbps, my effects sound OK. But I tested it on a limited number of Android devices (including a Sony Ericsson Xperia Neo and a HTC Desire HD). My questions: For mobile phones and tablets, generally, what parameters are recommended? Won't my 80kbps sounds be bad on a newer device (such as a modern tablet)? I don't hear any difference between stereo and mono (2 channels vs. 1 channel, right?), is there any noticeable difference at all for mobile phones / tablets? (in terms of the player experience) May it worth it at all? I assume that stereo sounds take much more in memory (when they're decoded to PCM), despite of the fact that the compressed OGG size is practically the same. Reacting to Roy T.'s great comment: Actually, I couldn't measure the PCM size (Android decodes OGG internally), but I thought that stereo will take more space than mono when uncompressed After throwing out one of the WAV channels in Audacity, and re-exporting it: The new WAV file size is half than before The OGG file size is practically the same as before The sound effects and game music was recorded by my friend who is an experienced hobby musician/composer, but he knows little about computers & software so he just gave me some high-quality WAV files generated via his hardware.These were stereo, but if I check them in Audacity, both channels appear to be exactly the same.Can I consider them the same (= moving to mono), or might there be some unnoticeable differences to the human eye?

  Read the article

• Suitability of ground fog using layered alpha quads?

  - by Nick Wiggill

  A layered approach would use a series of massive alpha-textured quads arranged parallel to the ground, intersecting all intervening terrain geometry, to provide the illusion of ground fog quite effectively from high up, looking down, and somewhat less effectively when inside the fog and looking toward the horizon (see image below). Alternatively, a shader-heavy approach would instead calculate density as function of view distance into the ground fog substrate, and output the fragment value based on that. Without having to performance-test each approach myself, I would like first to hear others' experiences (not speculation!) on what sort of performance impact the layered alpha texture approach is likely to have. I ask specifically due to the oft-cited impacts of overdraw (not sure how fill-rate bound your average desktop system is). A list of games using this approach, particularly older games, would be immensely useful: if this was viable on pre DX9/OpenGL2 hardware, it is likely to work fine for me. One big question is in regards to this sort of effect: (Image credit goes to Lume of lume.com) Notice how the vertical fog gradation is continuous / smooth. OTOH, using textured quad layers, I can only assume that layers would be mighty obvious when walking through them -- the more sparse they were, the more obvious this would be. This is in contrast to where fog planes are aligned to face the player every frame, where this coarseness would be much less obvious.

  Read the article

• Using USB to Ethernet with Linux Ubuntu 12.04

  - by Sriram

  Being a newbie, Please excuse if the technical Jargon used is not an universally accepted one :) I have a particular device (say device A) whose USB2.0 driver is available from Linux community. Linux UBUNTU12.04 based PC is able to detect that device via the available driver. My requirement is to ensure that PC can exchange the command as well as data with the device A over TCP/IP packets (In other words, instead of just a USB Based driver, there should be a TCP/IP wrapper over the device USB driver and still does the same job as the USB driver was doing before) Bought an USB (Female) to RJ-45 adapter,connected Device A (male) USB to the USB Female end of the adapter and the Ethernet end connected to the router. PC also is connected to the same router so that both Device A and the PC have the IP address in the same subnet range. So the packets produced by the device A can be routed to the PC via some binding( not sure how I can achieve this, but conceptual idea) Here are the issues I can see as of now 1) USB to RJ-45 is just a hardware signal conversion and not a NIC in itself and hence no MAC/IP ADDRESS assigned. Can we bind a virtual NIC created in PC with this connector? 2) Any available USB TO IP command as well as data translation wrappers available? e.g. command for the device A on Ethernet converted to command for the device A on USB which is then acted upon the device as a command from the USB driver There is some missing link in my understanding and hence it would be of great help if you can bounce off some ideas on how I can take this forward so that Device A and PC exchange data over IP. Thanks and Regards, Sriram

  Read the article

• IoT? Time for Enterprise Architecture

  - by OTN ArchBeat

  Of course you've been listening to the latest OTN ArchBeat Podcast on the challenges and opportunities in the Internet of Things. If so, you'll also be interested in ZDNet blogger Joe McKendricks' recent post, Will the 'Internet of Things' make CIOs' jobs harder?. In that post McKendrick offers this important bit of advice that will certainly have architects saying "I told you so." Enterprises need to develop architectural approaches to the management of data. Meaning the development of repeatable processes to source, ingest, transform and store information. For years, IT managers simply bought more hardware and addressed data with on-off integration projects. Now it's time for enterprise architecture. IoT is an important new phase in the evolution of enterprise IT. Challenging? You bet! But meeting any such challenge requires big, broad thinking and planning. In that context Enterprise Architecture has always been important. But as IoT gains traction and speed, enterprise architecture should be top of mind for all concerned.

  Read the article

• Nvidia optimus and Steam (on 12.04)

  - by Seiryuu

  I've obtained a copy of the .deb for the Steam beta, but it was pretty disappointing to see that it simply doesn't run. Hardware - Dell XPS L502, with Nvidia Optimus I have bumblebee installed. Trying to run Steam with the Intel HD 3000 completely fails to start it. Message received Installing breakpad exception handler for appid(steam)/version(1352224866_client) followed by a crash with no other information provided. Trying to optirun steam runs the client, but as soon as it gets to the home screen, it says that the Nvidia drivers I am using are out of date (and Steam requires newer drivers to run). It's probably worth to note that it throws the same Installing breakpad... error when run with optirun, but it doesn't crash the client immediately. Any way to fix this? Also, is there a way of manually updating the drivers in bumblebee without breaking anything? Alternatively, is there a reliable way of completely disabling the Intel GPU (in order to use the Nvidia GPU exclusively)? Note: I am using Xmonad with gnome-fallback, if that makes a difference. However, when I tried everything mentioned with Unity (2d), everything was the same, so I guess it has nothing to do with the window manager in use.

  Read the article

• xorg, nvidia, log-in all hosed - how can I completely reset graphics set-up/settings?

  - by Fred Hamilton

  I just did a fresh install of Mythbuntu 12.04.1 on my Intel MB with nVidia 9500GT graphics card. Hardware's been working great with 10.10 for about 2 years. Background: (optional - feel free to skip to question) I was trying to get my component video output to generate 720p, messing around with the nvidia drivers, and now the entire display system is hosed. I can SSH in and get a terminal. Depending on which nvidia package I install/remove, I get: Garbage on screen (after I "apt-get remove nvidia*") A low-res graphical log-in screen where I can log in as fred or guest. If I log in as fred, it displays some text mode status line then goes right back to the log-in screen. If I log in as guest, I actually get the full Ubuntu desktop, but I need to be able to log in as fred. Other times I get an error: "API mismatch: the NVIDIA kernel module has version 304.43, but this NVIDIA driver component has version 295.49." I've googled around, including trying this thread with the same error message, but to no effect. Question: How can I just reset x settings, drivers, everything display-related to the exact same way it was after a fresh install?

  Read the article

• links for 2010-06-01

  - by Bob Rhubart

  Venkatakrishnan J: Oracle BI EE 10.1.3.4.1 -- Do we need measures in a Fact Table? Troubleshooting from Rittman Mead's Venkatakrishnan J. (tags: oracle otn businessintelligence datawarehouse) Grid container support : JavaFX Composer An overview how JavaFX Composer supports the grid container. (tags: oracle sun javafx) John Brunswick: Site Studio Mobile Example - WCM Reuse The example highlighted in John Brunswick's post takes advantage of dynamic conversion capabilities in Oracle UCM that allow site content to be created and updated via MS Office documents.  (tags: oracle otn enterprise2.0) @glassfish: GlassFish 3 in the EC2 Cloud powering Dutch and Belgian community polls "The infrastructure is Amazon's Elastic Cloud Computing (EC2) environment because of the dynamic provisioning (elasticity) required by such an online service. Requests are handled directly by the grizzly layer of GlassFish with no extra front-end HTTP layer and shows great performance and scalability." -- The Aquarium (tags: oracle java sun glassfish cloud) James Morle: Flash Storage Will Be Cheap: The End of the World is Nigh "We now need technologies that look more like Oracle Exadata v2, with low-latency RDMA interfaces directly into the Operating System/Database. However, they need to easily and natively support other types of storage (unstructured data such as files, VMware datastores and so forth). The Exadata architecture lends itself well to changes in this area in both hardware trends and access protocols." -- James Morle (tags: oracle otn exadata database architecture virtualization) Java / Oracle SOA blog: HTTP binding in Soa Suite 11g PS2 (tags: ping.fm) Confessions of a Software Developer: Some Tips for Installing Oracle BPM 11g on Windows XP (tags: ping.fm) SOA and Java using Oracle technology: Book review: Oracle Coherence 3.5: Create internet scale applications using Oracle's high-performance data grid (tags: ping.fm)

  Read the article

• Dummy output after upgrade from 12.04 to 12.10, even though sound card is detected

  - by user115441

  So I just recently upgraded my system from Ubuntu 12.04 to 12.10. However, when I booted into 12.10 for the first time, no sound comes out of my speakers. I checked the sound settings and the Dummy Output was the only thing showing up. I used "hwinfo --sound" to check to see if my sound card was actually installed, and it was installed. hwinfo --sound hal.1: read hal dataprocess 2687: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 11: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb._aiKlM91Nt0 SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2668 "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller" SubVendor: pci 0x107b "Gateway 2000" SubDevice: pci 0x4040 Revision: 0x04 Driver: "snd_hda_intel" Driver Modules: "snd_hda_intel" Memory Range: 0x50240000-0x50243fff (rw,non-prefetchable) IRQ: 44 (91 events) Module Alias: "pci:v00008086d00002668sv0000107Bsd00004040bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown I'm not sure what to do here. The only time the sound will actually work is when I boot into my Windows partition and then reboot into Ubuntu. I mean I don't want to have to do that every time I want to use Ubuntu. I would really appreciate any help I can get on here.

  Read the article

• Steam (via Wine) crashes after login - any troubleshooting tips?

  - by new Thrall

  The Steam client crashes after I login. After submitting my credentials, Steam displays a dialog box informing me the client is 'connecting'. I then see the Steam main page and news page displayed for roughly a second or so before the client crashes. I'm running Ubuntu 10.10 (I think..what's the best way to verify? uname only displays Linux) which I've installed on a usb flash drive using a capser-rw file for persistence. wine-1.3.14 I'm not sure how to troubleshoot. How do I identify if the problem is with wine or steam or the video card driver, or what? Any ideas? hardware: motherboard: ECS Elitegroup 945GCT-M sound: integrated audio video: ATI Radeon X1950 console output: ubuntu@ubuntu:~/.wine/drive_c/Program Files/Steam$ wine Steam.exe fixme:process:GetLogicalProcessorInformation ((nil),0x32e488): stub fixme:process:GetLogicalProcessorInformation (0x1010c00,0x32e488): stub fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub. fixme:urlmon:CoInternetSetFeatureEnabled 5, 0x00000002, 1, stub fixme:urlmon:CoInternetSetFeatureEnabled 10, 0x00000002, 1, stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 2, 0x32d334, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 3, 0x32d338, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x1009a, 4, 0x32d33c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 2, 0x32d964, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 3, 0x32d968, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100a2, 4, 0x32d96c, 4) stub err:ole:CoGetClassObject class {77f10cf0-3db5-4966-b520-b7c54fd35ed6} not registered err:ole:CoGetClassObject no class object {77f10cf0-3db5-4966-b520-b7c54fd35ed6} could be created for context 0x1 fixme:wbemprox:wbem_locator_ConnectServer 0x1ab5f0, L"ROOT\CIMV2", (null), (null), (null), 0x00000080, (null), (nil), 0x42bbee8) fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 2, 0x32d8cc, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 3, 0x32d8d0, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100ae, 4, 0x32d8d4, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 2, 0x32d80c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 3, 0x32d810, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100b6, 4, 0x32d814, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 2, 0x32d2e4, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 3, 0x32d2e8, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100c0, 4, 0x32d2ec, 4) stub fixme:winhttp:WinHttpGetIEProxyConfigForCurrentUser returning no proxy used fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 2, 0x32d94c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 3, 0x32d950, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x100dc, 4, 0x32d954, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 2, 0x32da8c, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 3, 0x32da90, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10118, 4, 0x32da94, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 2, 0x32d514, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 3, 0x32d518, 4) stub fixme:dwmapi:DwmSetWindowAttribute (0x10122, 4, 0x32d51c, 4) stub fixme:dbghelp:elf_search_auxv can't find symbol in module

  Read the article

• Product Update Bulletin: Oracle Solaris Cluster October 2013

  - by uwes

  Announcing new qualifications and general news for the Oracle Solaris Cluster product. Hardware Qualifications Sun Server X4-2 and X4-2L servers, Sun Blade X4-2B server module with Oracle Solaris Cluster 3.3 Sun Storage 16 Gb Fibre Channel ExpressModule Universal HBA, Emulex Oracle Dual Port QDR InfiniBand Adapter M3 Software Qualifications Oracle Database 12c Real Application Cluster with Oracle Solaris Cluster 4.1 Oracle Database 11.2.0.4 single instance and RAC with Oracle Solaris Cluster 4.1 Oracle VM server for SPARC 3.1 SAP Netweaver with new kernel versions ZFS Storage Appliance Kit version 2011.1.7.0 and 2013.1.0.0 Application monitoring in Oracle VM for SPARC failover guest domain Storage Partner Update Oracle Solaris Cluster 3.3 3/13 with the HDS Enterprise Storage arrays EMC SRDF for Oracle database 12c RAC in Oracle Solaris Cluster 4.1 geo cluster configuration Oracle Solaris Cluster References Korea Enterprise Data, HDFC Securities, Dealis Fund Operations Web Updates New blog entry: Oracle Solaris 10 Brand Zone cluster Solaris Application Engineering website now includes Oracle Solaris Cluster application support information Please read the Oracle Solaris Cluster Product Update Bulletin on Oracle HW TRC for more details. (If you are not registered on Oracle HW TRC, click here ... and follow the instructions..) _____________________________________________________________________ For More Information Go To:Oracle.com Oracle Solaris Cluster page Oracle Technology Network Oracle Solaris Cluster pageOracle Solaris Cluster mos communityPartner web Oracle Solaris Cluster pageOracle Solaris Cluster Blog Solaris.us.oracle.com page

  Read the article

• Very slow write access to SSD disks on some Asus P8Z77 motherboards

  - by lenik

  I have Asus P8Z77-V LK motherboard, that ran Mint 13 (based on Ubuntu 12.04) just perfectly, but recently I've tried to install Mint 17 and noticed abysmal write performance. Write speed on SSD disk was about 1.5MB/sec, when it's supposed to be in 150-250MB/sec range. For write testing I've used dd if=/dev/zero of=/dev/sda bs=10M count=10 while booted up from LiveCD. I have also tested the read speed with hdparm -tT /dev/sda and got about 440MB/sec -- that's normal. I can tell, the read performance has not degraded at all and is not an issue here. Since I had a few different SSD disks and few motherboards, I've tested and tested and here are results: Asus P8H77 works fine with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V LK works with Mint13, has very slow write speed starting from Mint14. Asus P8Z77-V PRO works with Mint13, and works just fine with Mint14, 15, 16 and 17. The only difference between "PRO" version and others is that it has extra SATA controller onboard (in addition to the Z77 chipset SATA controller) providing extra 2 SATA ports. SSD disks work fine with "PRO" version when connected to the native SATA ports as well as to the ports provided by extra SATA controller, so this does not look like a hardware issue. As far as I can tell, there's something changed in the kernel while going from 3.2 to 3.5, that affects the detection of onboard SATA controller for Asus P8*77 motherboards, that screws up the write speed for SSD drives. Could anyone shed some light on how to fix this issue or, possibly, give a pointer to a more suitable place to ask this question?

  Read the article

• Cinnamon Settings Panel Blank After v 2.0.6

  - by Cinnamon Challenge

  After cinnamon upgrade to 2.0.6-20131026040307-precise via synaptic, the "cinnamon settings" gui or window is broken. It appears blank, only showing the configuration category icons for "Appearance", "Preferences", "Hardware", and "Administration". The icons that should be within these categories are gone. I don't know if cinnamon-control-center was removed during the last cinnamon update, but this issue began on Oct. 25. When running cinnamon-settings from terminal, several errors appear such as this: Could not load screen module; is the cinnamon-control-center package installed? /usr/lib/cinnamon-settings/modules/cs_user.py:112: Warning: g_object_unref: assertion `G_IS_OBJECT (object)' failed file_icon = Gio.FileIcon().new(file) (cinnamon-settings.py:5471): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkMenuItem, but as a GtkBin subclass a GtkMenuItem can only contain one widget at a time; it already contains a widget of type GtkAccelLabel Could not find network module; is the cinnamon-control-center package installed? cinnamon-control-center is not installed in synaptic, and when the module is marked for installation, unity is selected for removal. Is there any way to get this function back without removing unity? Release: Ubuntu 12.04 (precise) Kernel: 3.2.0-55-generic Desktop: Cinnamon 2.0.6-20131026040307-precise Some settings are still accessible through terminal by appending the name of the function to the command: cinnamon-settings panel cinnamon-settings calendar cinnamon-settings themes cinnamon-settings applets cinnamon-settings windows cinnamon-settings fonts cinnamon-settings hotcorner

  Read the article

• Business Forecast: Cloudy with a Chance to Gain

  - by Oracle OpenWorld Blog Team

  Join us at Oracle OpenWorld to learn how Oracle’s cloud solutions are transforming how customers do business.  Whether you’re interested in public, private or managed clouds, Oracle has a cloud session for you.  The Oracle Cloud Computing track offers an in-depth look at Oracle’s comprehensive cloud offerings, with featured keynotes by Oracle executives Larry Ellison and Thomas Kurian, eight general sessions, and more than 300 sessions and demos. Catch these must-see sessions: Keynotes Hardware and Software, Engineered to Work Together: Why It’s A Different Approach (Larry Ellison, Sunday, September 30 at 5:00 p.m.) The Oracle Cloud: Oracle’s Cloud Platform and Applications Strategy (Thomas Kurian, Tuesday, October 2 at 8:00 a.m.) The Oracle Cloud: Where Social Is Built In (Larry Ellison, Tuesday, October 2 at 2:45 p.m.) General Sessions The Future of Development for Oracle Fusion - From Desktop to Mobile to Cloud (Monday, October 1 at 10:45 a.m.) Oracle Fusion Applications - Overview, Strategy, and Roadmap (Monday, October 1 at 10:45 a.m.) Overview of Oracle’s Public Cloud Strategy (Monday, October 1 at 12:15 p.m.) Overview of Oracle’s Public Cloud for Database and Application Developers (Monday, October 1 at 1:45 p.m.) Building and Managing a Private Oracle Database Cloud (Monday, October 1 at 3:15 p.m.) Building and Managing a Private Oracle Java and Middleware Cloud (Monday, October 1 at 4:45 p.m.) Building Mobile Applications with Oracle Cloud (Monday, October 1 at 4:45 p.m.) Using Enterprise Manager to Manage Your Own Private Cloud (Tuesday, October 2 at 11:45 a.m.) Breakthrough Efficiency in Private Cloud Infrastructure (Tuesday, October 2 at 1:15 p.m.) To stay in touch with Oracle Cloud announcements, follow us on Twitter @OracleCloudZone or Like us on Facebook.

  Read the article

• Iphone/Android app – chatroom development – what framework & hosting needs?

  - by MikaelW

  I have some experience regarding IPhone and Android development but I am now struggling to solve a new class of problem: apps that involve a client/server chatroom feature. That is, an app when people can exchange text over the internet, and without having the app to constantly “pull” content from the server. So that problem can’t be solved with a normal php/mysql website, there must be some kind of application running on a server that is able to send message from the server to the phone, rather than having the phone to check for new messages every 10 seconds… So I’m looking for ways to solve the different problems here: What framework should I use on the two sides (phone / server)? It should be some kind of library that doesn’t prevent me to write paid apps. It should also be possible to have the same server for the Iphone and android version of the app. What server / hosting solution do I need with what sort of features, I just have no experience regarding server application that can handle and initiate multiple connections and are hosted on hardware that is always online I tried to find resources online but couldn’t so far, either the libraries had the wrong kind of license/language or I just didn’t understand… Sometimes there were nice tutorial but for different needs such as peer2peer chat over local network… Same with the server and the hosting problem, not sure where to start really, I’m calling for help and I promise I will complete this page with notes about the experience I will get :-) Obviously the ideal would be to find a tutorial I missed that include client code, server code and a free scalable server… That being said, If I see something as good, it probably means that I have eaten the wrong kind of mushroom again… So, failing that, any pointer which might help me toward that quest, would be greatly appreciated. Thanks in advance. Mikael

  Read the article

• Need database selection advise

  - by jacknad

  I know this is considered a bad question since there is no correct answer, but I need to decide on a database for embedded linux (DaVinci 368 based) hardware and I've never had to produce a design with a database before. Each record will probably contain less than 1000 images with associated alpha-numeric data and the mass storage will be some kind of flash drive. Only one user needs access to the data at a time. MySQL claims to be "The world's most popular open source database" but SQLite claims to be "the most widely deployed SQL database engine in the world." Perhaps there is another that is also the best in the world? Which is easiest to use for a database newbie? Should I just flip a coin? Does it really matter which one I pick? Do I even need to use a database software package or should I roll my own? I won't need bells and whistles like sorting, but I'll probably need to delete the oldest records to make room for new ones if the storage fills up.

  Read the article

• Ubuntu 14.04, only wallpaper and a mouse cursor is showing

  - by Abhishek Verma

  I upgraded to Ubuntu 14.04 weeks ago, that was a fresh install. And as usual installed, Unity tweak tool, some themes, Chrome, eclipse etc. Today, while playing with Unity tweak tool, I mistakenly switched Window spread to off, and bang, no problem yet. After realizing what I did I switched it to on again and then, the title bar of all windows, the status bar (guessing it's called that), and the launcher disappeared. Now I was left with a mouse cursor and the Unity tweak tool window, without the title bar. I thought a restart is needed, but sadly no shutdown option to click on, moreover, the keyboard didn't worked, neither the hardware shutdown button. So, I pressed the reset button. After a mundane restart, I was welcomed by the wallpaper and the mouse cursor, moving, that's it. Searched everywhere for a working solution, found some solutions in AskUbuntu itself, but they where all old and required terminal to be used, but since my keyboard isn't working, no access to the terminal. So, ofcource the question isn't a dublicate, at least, IMHO. Also, I was working on an Android project and have got no backups, so I won't be going for a clean install, or else I will start crying watching my weeks of work being deleted, any solutions, please.

  Read the article

• SQLAuthority News – BI Quiz Question – How to Optimize Cube? – Hints

  - by pinaldave

  I earlier wrote about SQL BI Quiz over here. The details of the quiz is as following: Working with huge data is very common when it is about Data Warehousing. It is necessary to create Cubes on the data to make it meaningful and consumable. There are cases when retrieving the data from cube takes lots of the time. Let us assume that your cube is returning you data very quickly. Suddenly on one day it is returning the data very slowly. What are the three things will you to diagnose this. After diagnose what you will do to resolve performance issue. Participate in my question over here Here is a couple of hints what I am looking for in answer: How to reach to root of slow performance? Is hardware causing the problem or something else? Is slowness is due to how cube is build and its granularity? Is underlying tables require maintenance? Is there is chance to refractor the process? Are there any tool which can help diagnosis the slowness of the cube? It is not necessary to answer all the question – but something to start with. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• What FOSS solutions are available to manage software requirements?

  - by boos

  In the company where I work, we are starting to plan to be compliant to the software development life cycle. We already have, wiki, vcs system, bug tracking system, and a continuous integration system. The next step we want to have is to start to manage, in a structured way, software requirements. We dont want to use a wiki or shared documentation because we have many input (developer, manager, commercial, security analyst and other) and we dont want to handle proliferation of .doc around the network share. We are trying to search and we hope we can find and use a FOSS software to manage all this things. We have about 30 people, and don't have a budget for commercial software. We need a free solution for requirements management. What we want is software that can manage: Required features: Software requirements divided in a structured configurable way Versioning of the requirements (history, diff, etc, like source code) Interdependency of requirements (child of, parent of, related to) Rule Based Access Control for data handling Multi user, multi project File upload (for graph, document related to or so on) Report and extraction features Optional Features: Web Based Test case Time based management (timeline, excepted data, result data) Person allocation and so on Business related stuff Hardware allocation handling I have already play with testlink and now i'm playing with RTH, the next one i try is redmine.

  Read the article

• Carriers Holding Your OS Updates Hostage

  - by Tim Murphy

  Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/10/10/carriers-holding-your-os-updates-hostage.aspx Just a small rant here.  Today the Windows Phone 8 GDR2 update finally became available for Nokia handset users.  Now I’m not sure that it is AT&T fault entirely that Samsung and HTC users got their updates two months ago and we are just finally seeing it.  It may have something to do with the Nokia Amber update.  But every Windows Phone update on AT&T from 7.1 on seems to have been delayed.  How is it that the premiere Windows Phone carrier is always the last one to release updates? Smart phone ecosystems are a partnership between the OS provider, the hardware manufacturer and the carriers.  If any one of those partners does not hold up its responsibilities then everyone gets a black eye.  The goal for all involved should be to release updates as early as possible with reasonable assurance of stability.  This ensures the satisfaction of consumers and increases the likelihood of future sales. From what I have seen so far AT&T has been the one breaking the consumer’s trust in the Windows Phone ecosystem.  Aside from voicing our dissatisfaction we may need to start voting with our feet until they realize that they being a poor citizen has consequences. Technorati Tags: ATT,Windows Phone,Windows Phone 8,Microsoft,Nokia,GDR2

  Read the article

• How do I install windows wireless driver for TP-Link TL-WN7200ND

  - by Jim

  I'm using the TP-Link TL-WN7200ND USB wireless adapter. I have downloaded the Windows drivers and updated Ubuntu to 10.10 by manually connecting the computer to the router. I also installed ndiswrapper-gtk. I get a Windows Wireless Drivers in my Administration menu, and I was able to get it to read the Windows 7 .inf file. The .inf for XP does not work. It adds it and the driver appears in the list with "Hardware: present". I set up the wireless connection information (ESSID and WPA2-Personal key). Problem: I don't see the network manager icon in the top right of the screen. I managed to manually start it manually using sudo services network-manager restart but it shows no connections in the menu, saying that there's nothing to manage. In my /etc/network/interfaces file I have an entry for the loopback and the standard two-liner for eth0 with dhcp. From memory, something like: iface eth0 auto eth0 dhcp I had read somewhere that 10.10 would have standard support for my wireless adapter (TL-WN7200ND) but that seems not to be the case. However, I don't ever remember having the network-manager icon in the top-right and it does not auto-start at the moment. This was originally an Ubuntu 9.10 install that I've upgraded over time. I also used to use pppoeconf to connect to the net, which might affect the /etc/network/interfaces file?

  Read the article

• Creating a retro-style palette swapping effect in OpenGL

  - by Zack The Human

  I'm working on a Megaman-like game where I need to change the color of certain pixels at runtime. For reference: in Megaman when you change your selected weapon then main character's palette changes to reflect the selected weapon. Not all of the sprite's colors change, only certain ones do. This kind of effect was common and quite easy to do on the NES since the programmer had access to the palette and the logical mapping between pixels and palette indices. On modern hardware, though, this is a bit more challenging because the concept of palettes is not the same. All of my textures are 32-bit and do not use palettes. There are two ways I know of to achieve the effect I want, but I'm curious if there are better ways to achieve this effect easily. The two options I know of are: Use a shader and write some GLSL to perform the "palette swapping" behavior. If shaders are not available (say, because the graphics card doesn't support them) then it is possible to clone the "original" textures and generate different versions with the color changes pre-applied. Ideally I would like to use a shader since it seems straightforward and requires little additional work opposed to the duplicated-texture method. I worry that duplicating textures just to change a color in them is wasting VRAM -- should I not worry about that?

  Read the article

• Should I list this work experience on my resume? [closed]

  - by Phoenix

  I am currently working at a company. I did an internship before this job with a prestigious company and project itself was challenging but it was in the initial phases and hence there were no tight schedules and we ended up doing brainstorming for the first month and the 2nd month actually setting up our hardware, which is linux servers in lab and a cluster administrator for the servers. And then i wrote an addin task which runs on the server and uses existing API to collect some statistics from the the servers in the cluster and feeding them into another entity which is basically an algorithm that calculates how the load on the servers should be automatically balanced. Neither of these things went into production by the time I left the company and I'm not even sure of their current state. Does it make sense to include it in my resume then? I also worked as a software engineer right out of school at another prestigious company for 9 months. I was involved in some bug fixes before the product launched and I don't even recollect the exact fixes I made to the product. So, will it make sense to have these experiences on my resume ? Will people question me about them and will saying it was bug fixes and mentioning what kind of fixes suffice as enough to justify my work ex there ?

  Read the article

• Geek Chess: Nixie Tubes as Board Pieces [Video]

  - by Jason Fitzpatrick

  We’ve seen some geeky chessboards in our day, but this board is a masterpiece of geekiness. Check out the video to see the Nixie tubes in action. Courtesy of a tinker named Tony, we find this delightfully analog and geeky chess set. He writes: This developed as a spinoff from the hardware and controllers I’m designing for a range of nixie clocks and watches as a ‘simple’ project that wouldn’t need much software to complete it. All visible parts are made from materials contemporary with Nixie technology and no modern plastics or resins are used anywhere in its’ consruction (other than the electronic components and PCBs). The board and pieces are machined from phenolic resin laminate and assembled using brass fittings. The brown base pieces have been filled and wiped with gold and silver engravers wax, giving a ‘worn gilding’ appearance. The displays are ex-Soviet Nixie gas display tubes, manufactured in the early 1980s. No Chinese LEDs here… How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

  Read the article

• SL150 Modular Tape Library Demo Equipment Purchase Opportunity Limited Special Pricing on Demo Configuration

  - by Cinzia Mascanzoni

  Oracle is pleased to announce that, for a limited time, Oracle VADs may purchase special SL150 Modular Tape Library configurations for demonstration purposes at a significantly reduced price. Submit your order today for these special SL150 Modular Tape Library configurations and you can start showcasing these products in partner demonstrations and proof-of-concepts. VADs may also sell demo units to their VARs so that they may use them in their customer evaluations to help shorten the sales cycle. The offer also allows VARs to sell the demo configuration after a prescribed demonstration period to support the demo product’s cost of ownership. Why wait? Order today! Rules and Guidelines Only authorized VADs are allowed to purchase the special SL150 Modular Tape Library configurations. Purchase time frame is from now until February 28, 2013. Only the predetermined configurations are approved for purchase at the prescribed discounts. Supply is allocated per region and it’s limited. Order MUST be placed via the Oracle Partner Store* (OPS) where applicable. See below for online and offline order processes. If reselling to a VAR, VAD must include the Partner Demonstration Hardware Terms with the order (online via OPS or with offline VAD Ordering Document). Please mark your calendars for the SL150 Modular Tape Library Demo Program webcast on Sept 5th. The objective of this call is to share the details of this demo program with you. For details on how to connect to the webcast, contact your VAD Manager

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >