Search Results

Search found 7555 results on 303 pages for 'installing'.

Page 281/303 | < Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >

• ubuntu hardrive repartition without uninstalling ubuntu or windows 7 and losing data of hardrive

  - by user141692

  I have and asus r500v with 750 gb gpt system uefi motherboard core i7 3610qm, nvidia geforce gt, with ubuntu and w7 dual boot, I had problems installing ubuntu because of the grub but I fix it with https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/807801, but I still have the problem of "warning: the partition is misaligned by 3072 bytes. this may result iin very poor performance. Repartitioning is suggested" in every linux partitioin I made and my 750 gb is not being used at the maximun capacity it only uses 698 gb. I want to make partitions so that the warning doesnt show up and I can use the maximum capacity of the HDD, as I did with another dual boot laptop (compaq presario cq40). I have the following partitions: unknown 1.0Mb: partition type: lynux Basic DAta partition, device: /dev/sda2 Usage: --, Partition flags: --, partition label:-- warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -system 210 Mb FAt, usage: Filesystem, partition type: EFI system Partition, Partition Flags:--, Label: system, Device: /dev/sda1, partition label: EFI system partition, Capacity 210MB, avilable:--, Mount Point: mounted at /boot/efi -134 Mb NTFS, usage: filesystem, partition type: linux basic data partition, partition flags:.--, device: /dev/sda7, partition label: --, capacity: 134MB,available:--, mount point: not mounted -OS 250 GB NTFS, usage: file system, partititon type: linux basic data partition, partition flags: --, type: NTFS, label: OS, device: /dev/sda3, partition label: basic data partition, capacity: 250 GB, available:-, mount point: not mounted -10GB FAT 32, usage: filesystem, partition type: EFI system partition, partition flags:--, type: FAT 32, label: --, device: /dev/sda4, partition label: --, capacity: 10GB, available:--, mount point: not mounted warning: the partition is misaligned by 3072 bytes. this may result in very poor performance. repartitioning is suggested. -10gb ext 4, usage: file system, partition type: linux basic data partition, partition flags:--, type: EXT4(version1) label:--, device: /dev/sda9, partition label:--, capacity: 10 GB, available:--, mount point at / warning: the partition is misaligned by 1536 bytes. this may result in very poor performance. repartitioning is suggested. -478GB ext4, usage: filesystem, partition type: linux basic data partition, partition flags:--, type: EXT4, label:--, device: /dev/sda5, partition label:--, capacity: 478gb, available:--, mount point: mounted at /home warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. -2.0gb Swap 2.0Gb, usage: swap space, partition type: linux swap partitioin, partition flags:-, device: /dev/sda6, partition label: capacity: 2.0gb warning: the partition is misaligned by 512 bytes. this may result in very poor performance. repartitioning is suggested. and as you can see it is not well organized so please help me to organize the partitions witahout uninstalling the w7, and if possible the grub2

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• Windows 7 remains powered on when restarting

  - by BombDefused

  I'm running windows 7 x64 on an MSI P67A-GD53 motherboard, in an Antec P280 Super Midi Towercase with a Corsair 650w PSU. I've just installed a second instance of windows 7 x64 on a separate disk (this is to keep my games separate from my work OS). The problem is that it appears now that I cannot restart from either instance of Windows 7. The shut down command, and sleep commands work as expected. When I try to restart, the shutdown happens but the system never reboots. Everything remains powered on, until I hold down the power button to force the power off. Ithink (but am not 100% sure) this has only started since I installed the second OS, and am assuming this has something to do with the motherboard needing to know which OS to run up again? Some other forums I've read suggest that the PSU has a major role in restart and could be at fault. Changing the boot order of the disks in the BIOS does not change anything. Any suggestions greatfully recieved! Update: I now have a reproduceable issue: I think the secondary OS install may have been a red herring. It was when windows tried to reboot during the install that I noticed the issue. After playing around with installing drivers, and rebooting many many times, I have found that it is the OC genie setting on the MSI motherboard that seems to trigger the problem. This makes sense as I only started using the OC genie feature a couple of weeks ago, and probably hadn't used restart in that time. However... simply turning off OC genie does not make the issue go away. I have to turn off OC genie, shutdown, start enter bios, go to the "Save and Exit" menu "Restore Defaults" yes to "Load optimized defaults", which will reset to clear the problem. Now when the PC boots into windows, I can restart as normal (and from the OS on either HDD). I only know how to control the issue, and don't still know the root cause. I'd like to be able to use the OC genie function if anyone can suggest a why I'm seeing this problem. Could it be that I'm drawing too much power when using OC feature?

  Read the article

• Profiles and using the local profile for a domain user

  - by Harry

  I’m having some trouble with profiles and would like to reach out for some help. I’ve tried to do some research to help myself along, but I’m not making much progress on my own. I’ve pretty much taken over the sys admin duties for my small lab, I don’t have much experience to justify it besides I’m the only with the time and dedication to go at it (The environment was in a state of disrepair). My network and domain I look over are extremely small by most standards, about 10 users at a time. They are pretty intensive activity on the network, and we do work with fairly large files. None of the network is online, which is nice at the moment because it allows me not to have another headache. On to my profile problem, I have set up roaming profiles for the users in the network. Now after a little research, I think I will be switching this to a hybrid of folder redirection and roaming profiles as this seems to best practice. I also don’t want the users having to wait for a long time if they have a bloated profile. Now I’ve finally got a build working using MDT. We have Mac Pros, and it wasn’t fun getting everything to play nice. The way I did this was by setting up a reference computer and installing all the software and tools that each user would need and editing the settings preferences to how we would need them. I think used MDT to do a sys prep and capture to create the image of my reference computer. Using the reference image I can push out my images to the rest of the desktops in my environment. The issue I’m having is when we join the computer to domain. The user can login and operate fine on the computer, but I’d like a more. When the user is logged on with their domain user name they lose a lot of the icons I had on my reference image, as well as the desktop background and some other miscellaneous settings. I would love to have the user log on using their domain user name and see the icons and desktop environment as I had it setup on the reference computer. I’m not sure if it is possible, or something simple that I’m missing, but any help would be greatly appreciated!

  Read the article

• Ubuntu Natty: 32-bit userland, 64-bit kernel?

  - by dsimcha

  I'm trying to manually install a 64-bit kernel for 32-bit Ubuntu. I have my reasons for doing so, but they're too complicated to explain here. Prior to Natty, this worked fine. Now, on Natty, I get the following error message when I try doing it the same way: dsimcha@dsimcha-laptop:~$ sudo dpkg -i --force-architecture linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb [sudo] password for dsimcha: dpkg: error processing linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb (--install): cannot access archive: No such file or directory Errors were encountered while processing: linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb dsimcha@dsimcha-laptop:~$ cd Downloads/ dsimcha@dsimcha-laptop:~/Downloads$ sudo dpkg -i --force-architecture linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb dpkg: warning: overriding problem because --force enabled: package architecture (amd64) does not match system (i386) (Reading database ... 159153 files and directories currently installed.) Preparing to replace linux-image-2.6.38-8-server:amd64 2.6.38-8.42 (using linux-image-2.6.38-8-server_2.6.38-8.42_amd64.deb) ... Done. Unpacking replacement linux-image-2.6.38-8-server:amd64 ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.38-8-server /boot/vmlinuz-2.6.38-8-server run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.38-8-server /boot/vmlinuz-2.6.38-8-server dpkg: dependency problems prevent configuration of linux-image-2.6.38-8-server:amd64: linux-image-2.6.38-8-server:amd64 depends on initramfs-tools (>= 0.36ubuntu6). linux-image-2.6.38-8-server:amd64 depends on coreutils | fileutils (>= 4.0); however: Package coreutils:amd64 is not installed. linux-image-2.6.38-8-server:amd64 depends on module-init-tools (>= 3.3-pre11-4ubuntu3); however: linux-image-2.6.38-8-server:amd64 depends on wireless-crda; however: dpkg: error processing linux-image-2.6.38-8-server:amd64 (--install): dependency problems - leaving unconfigured Errors were encountered while processing: linux-image-2.6.38-8-server:amd64 When I try the dependencies manually, I get, for example: dsimcha@dsimcha-laptop:~/Downloads$ sudo dpkg -i --force-architecture coreutils_8.5-1ubuntu6_amd64.deb dpkg: warning: overriding problem because --force enabled: package architecture (amd64) does not match system (i386) dpkg: error processing coreutils_8.5-1ubuntu6_amd64.deb (--install): coreutils:amd64 8.5-1ubuntu6 (Multi-Arch: no) is not co-installable with coreutils:i386 8.5-1ubuntu6 (Multi-Arch: no) which is currently installed Errors were encountered while processing: coreutils_8.5-1ubuntu6_amd64.deb Has anyone had any success installing 64-bit kernels on 32-bit Natty? If so, how can this be done?

  Read the article

• DNS and DHCP dies after ~2 days of use on ClearOS

  - by TheLQ

  I'm using ClearOS (based on CentOS, so any info specific to it should apply here) as a gateway, DHCP, and DNS server. I had this server running perfectly for a month or two before replacing it with another server. However due DNS and DHCP failing 2 days in and a host of other performance issues (the box was a little underpowered), I changed back to the origional server. However 2 days in DHCP and DNS are failing again, and I'm out of idea's on why. In both cases to my knowledge no network or server changes occurred after installation. Right after installing (and at least a day in) DNS and DHCP was working just fine. However later (Day 2) I get a call saying their internet is down (translation: Nobody can get to websites because DNS is down) I've tried to fix the problem by checking if the dnsmasq is even running (it is), restarting the service, and restarting the server to no effect. I do have two internal servers that have static DHCP leases but one's lease must of expired as I can't connect to it anymore. I'm hesitant to do any dhcp testing on the last server as I'll not be able to connect to it anymore. Is there anything anyone can think of on why DNS and DHCP would fail 2 days in to running perfectly? More info: Running dnsmasq in debug mode. This is all that's displayed even when running nslookup quackwall. I'm not sure though if nslookup commands should show up in the log [root@quackwall ~]# /usr/sbin/dnsmasq -dq dnsmasq: started, version 2.49 cachesize 150 dnsmasq: compile time options: IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP dnsmasq-dhcp: DHCP, IP range 10.0.0.100 -- 10.0.0.254, lease time 12h dnsmasq: reading /etc/resolv.conf dnsmasq: using nameserver 74.128.17.114#53 dnsmasq: using nameserver 74.128.19.102#53 dnsmasq: read /etc/hosts - 5 addresses dnsmasq-dhcp: read /etc/ethers - 2 addresses On the other server DNS and the Gateway are all configured correctly (10.0.0.2 is quackwall) lordquackstar@quackgame:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.0.0 0.0.0.0 255.255.240.0 U 0 0 0 eth0 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth0 lordquackstar@quackgame:~$ cat /etc/resolv.conf nameserver 10.0.0.2 domain highwow.lan search highwow.lan

  Read the article

• Dual booting Windows 7 & 8.1, using the Windows 8 Startup Options Menu, when Windows 8.1 is already installed and you want to add Windows 7

  - by Josh

  There are many excellent guides out there that explain how to dual-boot Windows 7 & 8. However, they are written for people starting with a Windows 7 installation and add a Windows 8 installation to separate partition. From what I'm reading, following this procedure will result in Windows 8 installing and configuring the Startup Options Menu with an option to boot Windows 7 & 8. However, in my situation I have a Windows 8.1 machine that I want to install Windows 7 on, and enable dual-boot, where I can use the Startup Options Menu to select the OS to boot. I haven't been able to determine how to do this. From everything I've been able to find, it looks like if I install Windows 7, it is going to take over the boot loader process, and I won't have access to the Windows 8 "Startup Options Menu." This answer suggests I boot to VHD, but notes a drawback: You can't do this if the C:\drive is encrypted using ANY encryption shceme. Be that BitLocker or 3rd party. The location of the .VHD file you are booting to must reside on an unencrypted volume. Well, that's a bummer, because that's exactly what I wanted to do--I wanted my Windows 7 partition to be encrypted, and my Windows 8 partition to also be encrypted. The idea being that when OS was booted, it was completely locked out from accessing data on the other OS's partition. At this point, I'm thinking my only option is to install Windows 7, and then re-install Windows 8, which will give me the dual-boot option... am I right? Or is there a way to make this work. I'm thinking that I would need to figure out a process like this: Configure the Windows Startup Options Menu with a "blank" entry for Windows 7, pointing to an empty partition Insert the Windows 7 installation media, install Windows 7, and somehow restrict it to that partition (i.e., prevent it from "taking over" from the Startup Options Menu" Is this possible, and if so, how can I accomplish this? My concern is that if I simply install Windows 7 to a separate partition, Windows 7 will take over the entire boot process and I won't be able to get to my Windows 8 installation any more.

  Read the article

• VMWare ESXi virtual machine can contact the gateway but not the DNS server

  - by Nathan Palmer

  I am having a bit of a strange issue. I have a VMWare ESXi server with two virtual machines running on it. They are running just fine and can communicate on the network without a problem. I am now trying to add a third. I am installing Ubuntu 8.04 Server. I assign it a static IP address and it's a fresh installation. Once installed I can ping the gateway but I cannot ping the DNS server. It's on the same network with the other two VMs which are communicating just fine. I have tried to reinstall the operating system but it still fails to connect. Here is /etc/network/interfaces auto eth0 iface eth0 inet static address 192.168.1.23 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 208.67.222.222 #opendns dns-search mydomain.com Here is route Destination | Gateway | Genmask | Flags | Metric | Ref | Use | Iface localnet | * | 255.255.255.0 | U | 0 | 0 | 0 | eth0 default | 192.168.1.1 | 0.0.0.0 | UG | 100 | 0 | 0 | eth0 Since I'm running this behind a FortiGate this is what the sniff command gives me when I try to ping 208.67.222.222 arp who-has 192.168.1.1 tell 192.168.1.23 arp reply 192.168.1.1 is-at MAC 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request 192.168.1.23 -> 208.67.222.222: icmp: echo request As you can see it looks like I never get a response. One interesting thing I notice is the arp reply's MAC doesn't look right. I have cleared the FortiGate's ARP cache though and checked the entry and it seems correct. The MAC it lists is the one for the router. However if I ping from a different virtual machine that is also Ubuntu 8.04 with a nearly identical configuration I get this. 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply 192.168.1.22 -> 208.67.222.222: icmp: echo request 208.67.222.222 -> 192.168.1.22: icmp: echo reply So, what could I be missing? Thanks.

  Read the article

• USB mouse disconnecting and reconnecting randomly and often

  - by Marc

  Specs: Q6600, evga 780I sli mobo, 4gig RAM, logitech MX518, windows 7 64bit, evga gtx 260, 650W power supply (single rail) The problem I am having is my mouse will reconnect/disconnect (will even hear the sounds from windows) and the light on the bottom of the mouse will turn off/turn on as it starts working again. It really sucks to be playing a game (and happens on desktop as well) for the mouse to just die out for a few seconds and come back. Sometimes it will not happen for days and other times it will do it 2 or more times within 15 seconds. I have tried two different wired mice, have tried multiple USB ports (on front of computer, back of computer, have also used a USB hub and have also plugged in a card that connects to the USB connectors on the motherboard and adds a few usb ports to the back of the computer, and I also bought a USB 2.0 PCI card and that did not help). Nothing else seems to reconnect like this, my usb keyboard has never once cut out like the mouse does and neither have any of the other devices I have connected (webcam, usb hub, various devices sometimes connected through usb cables, and IR reciever for windows media center remote). I have disconnected all usb devices except for my keyboard and mouse and the problem still occurs. I guess it could be something wrong with my motherboard but since no other devices behave similarly I'm just hoping that it is some kind of driver conflict. Installing logitech's drivers has had no effect. It seemed at first that if I go to device manager and uninstall HID-compliant mouse (that and logitech mx518 are listed) that would fix it but it doesn't seem to work anymore or at least not every time (it keeps reinstalling). I have googled "usb mouse disconnects and reconnects" and it seems to be fairly common but none of those were resolved. To stick some easy steps: It happens with or without the drivers installed It has happened with multiple mice on the same computer Bios is the latest version (P08) Motherboard drivers are the latest version Device manager is listing no problems on any USB devices Happens with every usb port, even addon usb cards Happens when all usb devices aside from mouse and keyboard are unplugged I read that maybe it is an IRQ conflict and I tried to look into that but did not really know what was going on, but didn't see anything obviously wrong. Thanks for any help guys, its driving me crazy!

  Read the article

• samba 3.5 "force user" doesn't seem to be sticking

  - by myCubeIsMyCell

  After installing a new OS with newer version of samba, I'm having trouble accessing my shares. I can browse to the specific share, but only to the top level. As best I can tell from the logs, it seems the "force user" in the samba config isn't sticking beyond the initial connection. Details below. I installed a new version of CentOS on my storage server. My old CentOS (4?)install had samba version 3.0.33, new CentOS is using 3.5.10. No domain/AD involved ... just home workgroup. no real security... just some shares hidden & some defined as read-only. here's my config: [global] workgroup = WORKGROUP server string = Samba Server Version %v netbios name = luna security = share # logs split per machine log file = /var/log/samba/log.%m log level = 2 # max 50KB per log file, then rotate max log size = 50 winbind use default domain = Yes [strge] comment = please path = /storage browseable = yes read only = no force user = windowsguest force group = users guest ok = yes So... the problem I'm running into is that the 'force user' only seems to hold for the initial connection & I see all the top level folders fine. When I drill into a folder I get access denied - which appears to be due to my windows user info being sent (trys to authenticate xuser - a non-existant user to samba, so maps to nobody & fails). Here's the smb error msg: [2012/11/29 14:30:27.326195, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [xuser] -> [xuser] FAILED with error NT_STATUS_NO_SUCH_USER [2012/11/29 14:30:27.326251, 2] auth/auth.c:314(check_ntlm_password) check_ntlm_password: Authentication for user [nobody] -> [nobody] FAILED with error NT_STATUS_NO_SUCH_USER Most of the top level directories are 755, some 777. Either way, can not access them. If I do a chown -R windowsguest.users ... no change... but if I do a chmod -R to 777 or 755 they become browsable... but still can't create files (even for 777 ones). Not sure what role it plays if any... but had to recreate the user windowsguest under the new os install, uid & gid match old user. Seems the main issue as far as I can tell is that samba isn't maintaining the 'force user' - but I could be wildly off base. Client OS is win7 pro x64. Thanks for any suggestions or advice!

  Read the article

• Specifying network settings during SLES 11 auto installation

  - by banjer

  I'm setting up an autoinst.xml file for auto-installing SLES 11. I get prompted for the various interface settings per below, but they don't seem to stick once the server reboots. I don't think I have the xml defined correctly. I'm hoping someone has experience with this. <ask-list> <ask> <path>networking,dns,hostname</path> <question>Enter Hostname (server name)</question> <stage>initial</stage> <default>merkin</default> </ask> <ask> <path>networking,interfaces,interface,0,device</path> <question>Enter the primary ethernet device:</question> <stage>initial</stage> <default>eth0</default> </ask> <ask> <path>networking,interfaces,interface,0,ipaddr</path> <question>Enter the primary IP Address:</question> <stage>initial</stage> </ask> <ask> <path>networking,interfaces,interface,0,netmask</path> <question>Enter the Netmask Address:</question> <stage>initial</stage> </ask> <ask> <path>networking,routing,routes,route,0,gateway</path> <question>Enter the primary Gateway Address:</question> <stage>initial</stage> </ask> </ask-list> The first one for hostname seems to be sticking just fine, but the rest do not. As an alternative, is there a way to stop the autoinstall at the section where you configure the network devices so that the user can take over? I was able to show the partition proposal, but not sure how to do the same with the networking setup.

  Read the article

• Python install issue on Mac OS X

  - by Michael Waterfall

  I have been using the standard python that comes with OS X Lion (2.7.2) but I wanted to build a UCS-4 version to handle 4-byte unicode characters better. I had already installed pip and packages like pytz, virtualenv and virtualenvwrapper, etc., and these are installed in /Library/Python/2.7/site-packages. My $PATH is /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin. To build a new version of python on the machine (outside of any project specific virtual environments, that will come later), I followed the instructions on this article and managed to build it in /usr/local/bin. The problem is that when I launched a new bash window, I got the following virtualenvwrapper error: Traceback (most recent call last): File "<string>", line 1, in <module> ImportError: No module named virtualenvwrapper.hook_loader virtualenvwrapper.sh: There was a problem running the initialization hooks. If Python could not import the module virtualenvwrapper.hook_loader, check that virtualenv has been installed for VIRTUALENVWRAPPER_PYTHON=/usr/local/bin/python and that PATH is set properly. The instructions said to move /usr/local/bin to the top of the /etc/paths file, and since then I've noticed some strange issues. I installed pip into /usr/local/bin and now I have assumed that since I'm working in /usr/local/bin, and the newly installed python's site packages is now located in /usr/local/lib/python2.7/site-packages, when I do pip freeze, it should be empty as nothing is installed there yet. However, pip freeze still reports things installed in the old (OS X) site-packages folder. Here's some info after the build: $ which python /usr/local/bin/python $ which pip /usr/local/bin/pip $ echo $PATH /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin When I uninstall a python package with pip, it removes it from the old site-packages folder as expected. When I install it again, instead of installing it in /usr/local/lib/python2.7/site-packages, it installs it in /Library/Python/2.7/site-packages (verified by attempting to install it again and receiving Requirement already satisfied (use --upgrade to upgrade): pytz in /Library/Python/2.7/site-packages ). How is it getting that path for the old site-packages folder? Why won't it install it in the correct location for the python install it's using? I'm getting several other issues since promoting /usr/local/bin but I think if I understand this I'll be able to get somewhere. Can anyone see what's happening? If you need any more info I'll be happy to provide it.

  Read the article

• Internet connection sharing between Windows XP and Windows 7

  - by Dave

  I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

  Read the article

• How can Windows XP/7 users cleanly connect to Mac OS X Server 10.9.4 Mavericks with Active Directory integration?

  - by JakeGould

  I’m a Linux/Unix systems admin who also manages a Macintosh server infrastructure & there is a lone Mac Mini in the mix running 10.9.4 that I would like Windows XP & Windows 7 users to connect to with little or no hassle. The problem? Windows users can’t seem to even get to the point of a password prompt yet connect. Mind you this server replaced a Mac OS X 10.6.8 server that had issues, but never had issues with Windows users connected. The gist of this post is: The tons of different messages out there about Mac OS X 10.9.4 Samba support are mind-numbingly confusing. Can anyone share some solid specifics here? I’ve read pieces like this one here that suggest turning off file sharing & then adding a share with AFP/SMB enabled would work. But the suggestion seems to apply to 10.8. And from what I know a lot has changed in Samba support in 10.9 let alone the iterations to 10.9.4. Then I found this great tutorial here that explains things step-by-step. Which seems like it should work, but the problem is the example given applies to a local user created on the Mac when I would like users in an Active Directory group—which the Mac is bound to—access the Mac Mini shares. There are also tons of great tips here on MacWindows.com but nothing seems solid to the issue I am facing. So from what I am reading these are my options: Local User Versus Active Directory: Setup a common local user on the Mac OS X 10.9.4 server to be used for Samba sharing since Active Directory won’t work. Is this really the case? Because loss of AD integration is a major pain. Do Extended File Attributes Get Retained from Windows Users: If this were to work, how do extended attributes come into play? Loss of metadata & related info is not an option. How Fragile is Any of this to Updates: How does any of this shake out with Mac OS X updates as well as Windows updates? Installing Official, Open Source Samba: Would upgrading the Samba install on the server to the official open source Samba via a package like SMBUp or via the Hombrew method described here help or make the issue worse? I fully understand there have historically been issues in mixed environments, but nowadays Windows users connecting to a Mac seem to have a truly hellish road ahead of them. Unless I am missing something?

  Read the article

• Impossible to create/format install window 7 on unpartioned HD

  - by fra pet

  Hi guys i am getting nut reinstalling windows 7 on one of those Acer aspire all-in-one... The original OS(windows professional x64) was not starting, after the initial screen the bios was prompted. So step 1: i tried to access the system partition and reinstall everything but could not get at the point step 2: i set the bios to native ide and i tried to insert my original copy of windows professional and do a clean installation, but it does not allow me to format/create other partion form the installation mask step 3: my BAD, i tried to install ubuntu and i clean the whole hard drive, i was getting an error at some point during installation so i decided to get back to windows step 4: Windows 7 again, at the disk screen of the windows installation i entered into the prompt and played around with DISKPART... -i listed the disk and the HD was disk 0. -i selected disk 0. -i CLEAN disk 0 successfully. -i tried to create a CREATE PARTITION PRIMARY but gave an error cache corrupt and disk not up-to-date (after i try to create a partiton in disk 0 it disappear when i try LIST DISK and i have to restart before he can list DISK 0 again, RESCAN did not worked). -tried CLEAN ALL(2 hours) and succeeded. -try again to create primary partition and failed, same errors -try to install my old copy of windows xP pro and it seems to work, it create a partition, format(only quick worked, slow mode was at 0% after 1 hour so i stop), it start installing and around 90% installation said it could not copy a file and he stop -back on windows 7 again, it says that the hard drive has 490+gb unpartitioned but won't create a partition and format. -i tried again DISKPART as i though i messed up with the MBR when i installed ubuntu, so i did all of the instruction below http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html http://support.microsoft.com/kb/927392 the errors were: on bootsect: the systne partiton was not found, Data error cyclic redundancy check on bootrec /FixMbr: A device attached to the system is not functioning but did not worked, and still can not partiton/format/install on a blank HD i tried some bootable clean disk tool and start infinite loop on the same errors the bios setting are: sata: native ide. if i put AHCL(or something like that does not load the HD and the DVD). quick start/quite start: disabled. Are there any other option or tools i can try before i try change the HD(That is my last option)? Thanks to everyone.

  Read the article

• Slow wifi from Windows Server 2003 virtualized in XenServer

  - by John Clayton

  I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks! Update: The issue has been further narrowed down to Windows Server 2003, which Windows Home Server is based on, running in XenServer with the XenServer tools installed.

  Read the article

• Why is the installation of certain programs always such a pain in Linux [closed]

  - by Saif Bechan

  I am new to Linux and I am trying to set up a server. For this I sometimes to need to install special software, but the installation of this is always such a pain. For example I wanted to try the htscanner to see if it did the job for me. When i got to the page there is NO INSTALLATION guide. I had to search for the right one on google. Even on google its a pain to find the right method. Just try it - google search.After a long search and tried different things I finally found out that I had te install some more software before it will work. The website says that the version I used did not had any dependencies. Thats a lie. Release0.8.1: No dependencies registered. You do need certain things for it to work. After managing to set it up it still didn't work I can't figure out why because there is no official guide on the website. So I wanted to just uninstall it and find a better solution. Uninstalling. Uninstalling something in Linux is a real mystery how this actually works. The best answer I got is to manually look for the files and delete them. Whats up with that! There is never something said about uninstalling on the websites. Even on the website of CentOS itself it tels you how to install something like rpmforge packages (it's a miracle they tell you and not have to google it) but there is no mention of what to do when you want to uninstall. Why not? The forums you get on when trying to solve your problem are most of the time in plain text, and you have to scroll trough huge error logs before you see somethings that vaguely resembles your question if you are lucky. The Question My question is if there are any recommended websites / forums that explain the basic concepts of installing and uninstalling software on Linux. And explain other useful operations. And not Wikipedia or the first hits of Google, I have been there already. I am looking for some easy to read trough guides on these operations on Linux. I have been on a lot of websites that explain some Linux operation, but I bet its easier to get a degree in rocket science than to read trough the website and understand what they try to say.

  Read the article

• Run Flyff without elevating user to Admin or requiring Admin Password

  - by AnonJr

  Bottom Line: I need to set up one game on my little sister's laptop to run without requiring an admin password/account. Its the only game that seems to insist on it... so far. Detailed Version: I set up my 14-year-old sister as a regular user on her Windows 7 Home Premium laptop, and almost everything has been fine - until she found a new game (Flyff) that doesn't seem to want to run without an Admin Password (or being logged in as an Admin). For what should be obvious reasons, I'm not going to make her an Admin. or give her the Admin password (which she swears she'll only use to run this game... anyone else buying that? Bueller?) Also, the parents aren't admins on her laptop (they are on their own, but that's another discussion for another day) and I'm not going to set them up as one as I know from past experience that the 3rd time my sister asks them to put in their password, they'll just tell her what it is - at which point I might as well as have just set her up as an admin from the outset. This is a Win7 Home Premium (64-bit, but I doubt that makes a difference) laptop, so using GPEdit is out. I also tried an answer provided in a related (but less specific) question. The app has read/write permissions for its folder in Program Files (x86), yet that doesn't seem to make a difference. I have not yet dug through the registry as mentioned in another answer to the aforementioned question. Just to be thorough, I have checked the "Run as Admin" option on the shortcut's properties to no avail. Am I missing something? Addendum 2010-11-11: Re-Checked permissions as per Joel's answer, and it didn't make a difference. Followed Jane T's suggestion (and Aeo's second) and created a "Games" folder outside Program Files, installing the game there - and making sure regular users had all the permissions they would need. No joy. After the latter of the above two changes, it occurred to me that it may be a UAC issue, so for kicks I turned off UAC - still the damn message. Last item noted: could it be a result of the publisher not being specified/verified? I've been taking a closer look at the error message and it occurred to me that the missing/unverified publisher info could have been the problem all along... Correct me if I'm wrong, but if that's the case, that means there's nothing I can do short of giving her some sort of Admin privileges (i.e. elevating her account, or giving her the password to a separate Admin account) or giving Mom an Admin account.

  Read the article

• Having troubles connectiong Magento to external Windows Database Server using Windows Azure

  - by Kevin H

  "I tried to make this easy to read through" I am using Ubuntu 12.04 LTS for Magento and installed these commands onto the system: sudo apt-get install apache2 sudo apt-get install php5 libapache2-mod-php5 sudo apt-get install php5-mysql sudo apt-get install php5-curl php5-mcrypt php5-gd php5-common sudo apt-get install php5-gd I used Windows Server 2008 R2 August 2012 for Mysql Server For a reference, I used http://www.windowsazure.com/en-us/manage/windows/common-tasks/install-mysql/ When the server was setup, I added an empty disk to it Then, I added endpoints 3306 Next I accessed the server remotely After that, I formatted the empty disk and was inserted as F: Next I downloaded Mysql from http://*.mysql.com version Windows (x86, 64-bit), MSI Installer 5.5.28 In the installation process, I used these settings: Typical Setup - Clicked Next, install, next Chose Detailed Configuration - Clicked next Chose Dedicated MySQL Server Machine - Clicked Next Chose Transactional Database Only - Clicked Next Chose the "F:" Drive - Clicked Next Chose Online Transactional Processing (OLTP) - Clicked Next For Networking Options, I checkmarked 'Enable TCP/IP Networking" 'Add firewall exception for this port' 'Enable Strict Mode' - Clicked Next Chose Standard Character Set - Clicked Next For Windows Options, I checkedmarked 'Install as Window Service" 'Launch the MySQL Server automatically' 'Include Bin Directory in Windows PATH - Clicked Next For Security Options, I checkmarked 'Modify Security Settings' and set root password - Clicked Next Finally clicked Execute and Finish These are the Firewall Setting that I set I clicked inbound rules Properties Scope Allow IP Address and used the internal Address for Magento Server Clicked Apply and exited Next, I opened up MySQL 5.x Command Line Client Entered Root Password Then entered these commands mysql create database magento; mysql Create user magentouser identified by 'password'; mysql Grant select, insert, create, alter, update, delete, lock tables on magento.* to magentouser mysql exit Finally, I opened up the Magento Downloader Magento validation has approved all PHP version is right. Your version is 5.3.10-1ubuntu3.4. PHP Extension curl is loaded PHP Extension dom is loaded PHP Extension gd is loaded PHP Extension hash is loaded PHP Extension iconv is loaded PHP Extension mcrypt is loaded PHP Extension pcre is loaded PHP Extension pdo is loaded PHP Extension pdo_mysql is loaded PHP Extension simplexml is loaded These are all installed on Magento Server For the Database Connection, I used: The Database server only has MySQL 5.5 Server installed on it Host - Internal IP address User Name - The User I created when setting up database Password - The Password I created when setting up database For the password, I did some research and found out that Magento only accepts alphanumeric, so I went and set it up again and used only alphanumeric for the User password Now, I am still getting Accessed denied for database Connection. Also, I have tryed to setup mysql on independant Linux Server but kept getting errors. When, I found the solution. Wouldn't work, so I decided to try Windows. These is the questions, I have been asking and researching to debug this issue Is it because I am using Linux for magento and Windows for Database. I have had no luck in finding a reason why this wouldn't work There must be something, I am missing I also researched the difference between linux sql databases and windows sql databases but have not come to conclusion, if installing Mysql on windows would make a difference in syntax and coding. I have spent a lot of time looking into this and need some help with direction on how to complete my project. Any type of help would be appreciated.

  Read the article

• XP Pro product keys

  - by Bill

  I have a very serious problem. After my XP Home OS was trashed by rogue software - a trial of a thing named TuneUp - I did a clean install, including HDD reformat of Windows XP Pro from a purchased OEM disk. This was Service Pack 2, subsequently upgraded to SP3. I had conclusively mislaid the product key. I had to access data on the machine VERY urgently and I did not then know that under some circumstances Microsoft might agree to provide a replacement. I found what I now know must have been a pirate key on the Net which enabled installation but NOT activation. This of course left me functional but 30 days before meltdown - about 20 days left as I write this. Various retailers want around £100 for retail with matching product key. - this would be paying twice over just to continue use on the same computer. I have neither need nor intention of installing XP Pro on any other computer. I have tried a number of applications claiming to deal with this problem but none of them work. A Belarc profile shows that the pirate key has replaced the original one on the system. I have now found two keys, one of which might be the original, but neither work. I am about to upgrade the HDD and it looks like I will just be passing the problem on when I install XP. I have retrieved a key from the disk, but it is seemingly one Microsoft use in production and does not work. It is 76487-OEM-0015242-71798. The keys I have, one of which which might or might not be the original, are CD87T-HFP4G-V7X7H-8VY68-W7D7M and FC8GV-8Y7G7-XKD7P-Y47XF-P829W (or P819W - I believe it to be the latter, but the box will not accept it). The pirate key which has enabled this install and which is now stored on the system but will not activate is QQHHK-T4DKG-74KG7-BQB9G-W47KG. In these circumstances is it likely that Microsoft would issue a replacement? Is there any other solution? I am not trying to defraud anyone, just to keep on using the product I legitimately bought. Bill

  Read the article

• Permission denied install Joomla CiviCRM

  - by Tim

  Dear All, I am trying to install CiviCRM on a Joomla 1.5.17 web server running Ubuntu 9.10. Uploading the package to the tmp directory in /var/www/[site name]/tmp and installing creates this error: Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: fopen(/var/www/trbcp/administrator/components/com_civicrm/civicrm/templates/CRM/common/civicrm.settings.php.tpl) [function.fopen]: failed to open stream: Permission denied in /var/www/trbcp/libraries/joomla/filesystem/file.php on line 240 Warning: include_once(/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php) [function.include-once]: failed to open stream: Permission denied in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: include_once() [function.include]: Failed opening '/var/www/trbcp/administrator/components/com_civicrm/civicrm.settings.php' for inclusion (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 115 Warning: require_once(DB.php) [function.require-once]: failed to open stream: No such file or directory in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Fatal error: require_once() [function.require]: Failed opening required 'DB.php' (include_path='.') in /var/www/trbcp/administrator/components/com_civicrm/configure.php on line 140 Initially I got a permissions denied error and thought that Joomla did not have permissions to all its directories but looking at Help-System information all the necessary directories are writable. I then decided to chmod 777 all the directories and try again but it still fails. Looking at the directories afterwards it seems that the new directories being created are not being created 777. By changing them I can get at least one step further before the error appears again. My question is does anyone know how to get round this? I am thinking that the new directories being created will require sudo privileges to have mv and create actions carried out, hence the permission denied errors. Can this be configured in Joomla? Or is there a way to specify that new directories created in /var/www/[site name] take 777 by default? any help greatly appreciated! EDIT: P.S. if anyone could give me a clue as to how the insert code feature works as well that would be great! Might make this post a bit more readable! EDIT2: Well I have had a bash at changing the permissions and ownership. sudo chown -R www-data:www-data /var/www/trbcp I then tried changing the whole /var directory (insecure I know but this is a test and dev server for me to find my feet on) to 777 and still getting permission errors. It seems to be error opening stream? Not a php guy so not sure what that is but could it be that permissions to run php script need to change? any thoughts greatly appreciated.

  Read the article

• how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

  - by matchew

  I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

  Read the article

• Windows Setup could not configure Windows to run on this computer's hardware

  - by Hello71

  The whole installation goes smoothly up to the point of "Completing installation ...". The monitor changes resolution, after which a standard dialog box pops up saying Windows Setup could not configure Windows to run on this computer's hardware Then, in a few seconds, the whole machine powers down. Trying to restart produces the message: STOP: c000021a {Fatal System Error} 0x00000000 (0xc0000001 0x00100448) OR it boots into Setup and comes up with the message: Windows Setup encountered an unexpected error... (This is not the actual error, just paraphrasing) I tried using the OEM restore instead of a regular install, but it fails with the same error. (Even though it worked before...) General specs: HP Pavilion Elite e9262f Intel Core i5-750 Processor ATI Radeon HD 4650 Hitachi HDT721010SLA360 ATA Device 6GB DDR3 RAM SuperMulti DVD Burner with LightScribe Some built-in Wi-Fi module http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01916917 I've tried disconnecting the wireless card and disabling the built-in Ethernet and Firewire via the BIOS, and replacing the wireless keyboard and mouse with wired USB ones. Didn't work. I've also tried changing the SATA controller settings in the BIOS to RAID, AHCI, and IDE, reinstalling each time I changed. Still not working. I think the reason why it is showing the Fatal System Error is because it didn't finish installing before it errored out and shut down, so the system is left in an inconsistent state. I've tried 3 different copies (including the OEM restore) of Windows 7 now, and they're all failing at the same point, with the same error message. I've tried to install Windows 7 maybe 10 times already, with the exact same error message at the exact same location. Hm... Interestingly, the 32-bit version of Windows 7 works, but the 64-bit version doesn't. Perhaps it was a badly burned disk? Reburning the 64-bit version still comes up with the same error. Here's a picture of the side of the case that clearly says it came with Windows 7 64-bit, along with the model number and CPU. sudo fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009896f Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 7 HPFS/NTFS /dev/sda2 14 94119 755906445 7 HPFS/NTFS /dev/sda3 119922 121602 13492224 7 HPFS/NTFS /dev/sda4 94120 119922 207257740+ 5 Extended /dev/sda5 119527 119922 3170769 82 Linux swap / Solaris /dev/sda6 107174 119526 99225441 83 Linux /dev/sda7 94120 107173 104856192 7 HPFS/NTFS Partition table entries are not in disk order

  Read the article

• Avoid read-write access to bad sectors on HDD to continue working on the HDD

  - by goldenmean

  I have a HP Pavilion dv6446 notebook. It had Windows Vista Home premium. After 4.5+ years of usage, just recently it started malfunctioning. While working fine, its screen goes white or sometimes some thin black lines horizontally. Laptop freezes. Hard reboot works. Again it works for some 2 hrs or so, same error. To diagnose I did run the Memory and Hard disk check which is present in the Bios Setup. Memory test passed. Hard disk test returned an error saying something like - "Replace the hard disk". Bad.. Some sectors or platters have gone bad on the disk. (I confirmed this later by further tests mentioned below) Then I tried installing a Ubuntu 11.10. It listed 3 partitions /dev/sda1, sda2, sda2. It again gave error and could not install grub loader on /dev/sda1. Bad sectors. Then redid the Ubuntu installation, this time asked to to install the Ubuntu on /dev/sda3. and kept /dev/sda1 for /home. Installed fine, and works fine as well. Due to unavailability of WiFi/ Ethernet driver for that adapters under Ubuntu( at least I could not configure them and get the networking working at all), I decided to go back to reinstall windows Vista. It did install fine. I did not have to format one data partition which has my data. I just formatted one partition which installed Windows So in effect HDD has not undergone a full format here. Worked ok for 1 day. But same white screen and freeze happened. Looks like while it is in use, it accesses the bad sectors for storing some data and that's when it bombs. I am inclined to think HDD has not failed fully or crashed but has developed bad sectors. Else if it was a HDD crash, it would have refused to boot at all let alone install on it. Questions: Is there any HDD test check under windows or any such tools windows/linux based ewhere which can identify the bad sectors of the HDD and 'lock/isolate' them from further read-write access of any kind. If not what are my options, if any to salvage this laptop HDD without replacing it. EDIT: Would the Disk Error checking tool under windows help in any way?

  Read the article

• SQL 2008 R2 Named Instance Client Connectivity Issues?

  - by Jerry Dodge

  We're upgrading our software from using SQL 2000 to 2008 R2. Our customers will be installing an update which uninstalls 2000 and installs 2008 R2 under the same instance. So if no instance existed, then no instance name will be set (default). However, the problem starts with the customers which have a named SQL instance. Starting in 2008 R2 (not sure of ones before), for some reason, a client connecting to the server by its instance name is unsuccessful. I'm testing from the Management Studio - if I can't connect this, then nothing can connect. I browse network servers, and find the specific server\instance in the list. But, upon trying to connect to an instance name like MyServer\INST, I get: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) I do in fact have TCP/IP and Named Pipes protocols enabled, this is the first thing I did. When I connect to the server using a comma (,) and port number like MyServer, 49195, it works just fine. So it appears that client computers are just unable to identify the instance names. This has happened on all our installations of SQL 2008 R2 and from all client computers, including Win 7, XP, Vista, Server 2008, and Server 2003. We never experienced such issues on earlier versions of SQL. The problem even persists if the firewalls and antiviruses are all disabled. Now, this is a large update which we will be distributing soon to all our customers, and we want to minimize the interaction they need with us to get this installed. We absolutely hate the idea of using a port number, because it will always be different, and we would have to modify each client to point to this server/port. Some of our customers may have hundreds of client computers. How do I make client connections to a named SQL instance work again? After all, this is the whole purpose of named instances, and if a client can't connect to this instance by its name, then what is it even named for? EDIT It was mentioned to make sure SQL Browser is running, so I checked, and it is running. The server is also able to connect to its self (locally) - just external connections are refused. UPDATE After more careful checking, I learned the firewall wasn't completely disabled when testing, and upon disabling it completely, this works. So it appears that SQL Browser is being blocked by the firewall from external clients from accessing.

  Read the article

< Previous Page | 277 278 279 280 281 282 283 284 285 286 287 288  | Next Page >