Search Results

Search found 10313 results on 413 pages for 'hardware sharing'.

Page 282/413 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• AHCI and Memtest86+

  - by satanicpuppy

  I've got a motherboard with SATA AHCI enabled, and I need to disable it to run Memtest86+ (because Window's built-in RAM diagnostic tool isn't worth a barrel of warm snot), and because the Memtest developers are too lazy to fix the bootloader problem. Fine, I know how to do that. The problem is, I, in a moment of insanity driven by the fact that I work with hardware RAID cards all the time, felt the need to enable the onboard RAID. In retrospect, this was stupid: the onboard raid is a joke, but I'm stuck with it. My question is, if I disable AHCI am I going to lose the RAID information? I haven't been able to find a definitive yes or no anywhere, and I'm not in the mood to find out the hard way.

  Read the article

• windows seven disk check error

  - by crazybmanp

  i have gotten the error in the microsoft KB article 975778 (http://support.microsoft.com/kb/975778/en-us) i was able to get onto my computer luckily, but when i went on to get the hotfix that is stated in the article, it gave me this error when i ran it: "the update is not applicable to your computer." is there any way of getting the disk check error to stop, or to get this fix to work. i will answer any questions on hardware if you post the questions in the comments. answers to questions this is the a full version that i got from ASUS as an upgrade disk from windows vista (hopefully more specific than you were asking)

  Read the article

• BSOD 0x000000f4(Probably caused by : wininit.exe)

  - by vacuum

  I have BSOD with 0x000000f4 code. It appears when system is not loaded at all. No new hardware where intalled. Only nvidia drivers where updated 3 days ago and they are up to date for now(version 296.10). System Health Report(perfmon /report) shows nothing interesting(only complained on disabled UAC) System is on SSD disk(WDC SSC-D0064SC-2100 B) Dump Spec: OS Name Microsoft Windows 7 Ultimate Version 6.1.7601 Service Pack 1 Build 7601 System Manufacturer Gigabyte Technology Co., Ltd. System Model P31-DS3L System Type x64-based PC Processor Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Award Software International, Inc. F9, 10.07.2008 Any suggestions?

  Read the article

• Right Drag on Mac

  - by Mafuba

  How do you perform a right-click-drag operation on Mac hardware? I know you can right click, but there does not seem to be a right click drag gesture. In my specific case I am using a MacBook Pro, and I am in a Windows environment. The question is more than just theoretical. I ask because there is functionality that uses this gesture, at least in the Windows world. For example, right now I'm trying to do a copy and rename in the TortoiseSVN repository browser. I think there are things you can do with a right drag in graphical editors like Photoshop as well. In windows you get a context menu when you right drag files. For those familiar with the software, I know I can do it in other ways; I'm not looking for workarounds to specific problems.

  Read the article

• Xen on bare metal, Mac OS X 10.6, Vista, Debian as guest OSes

  - by Mischa Arefiev

  I have: a desktop PC (Athlon 64, 2 cores) ...that came with Windows Vista, and a retail DVD of Mac OS X 10.6 I want: to install Mac OS X through Hackintosh (I believe my hardware is suitable), to also run Windows Vista with full 3D support for video games and Youtube, to also run Debian GNU/Linux with optional 3D for work. I don't think my CPU supports VT-x, but it should have AMD-V. So the question is: Can all of this be done with Xen (Xen on bare metal, all three OSes as guests)? Or should I just try to install OS X first and then run Vista and Debian in Parallels?

  Read the article

• Hot video card in server

  - by DougN

  Not sure if this belongs here or Superuser (I looked at Superuser -- suspect there are more hardware gurus here). I have a server that sits in a cabinet. It's connected to a small screen that is normally off. However, the video card is running at about 210 F all the time. The rest of the PC is pretty cool (getting temps from SpeedFan). Any thoughts on a way to quiet/calm/cool the video card since it's never really doing anything anyway? I'm usually logged out on the server, and no screen saver defined. Windows is already set to turn off the screen for power saving at 5 minutes.

  Read the article

• Nokia Pc Suite problems with bluetooth (win7)

  - by wurlog

  I have a new Nokia C5-00 and a HP 620. The Bluetoothdriver are installed and the windows Bluetoothstack finds the mobile. After installing Nokia PC Suite I am asked to choose a connection method. As I click on Bluetooth the Nokia PC Suite shows an error message: "Cannot use the connection type.Check that all the needd hardware,software and drivers are available. (Code: OpenMedia)" I tried to switch it on and off via the "wireless" key on the laptop. The HP Software for the button shows that the Bluetooth is deactivated and advices me to go to the device manager and activate the Bluetooth device. Strangely the Bluetooth symbol (I guess from the windows Bluetoothstack) pops up at the same time and I can use the Bluetooth in it's basic windows features, but still nokia suite won't work. ideas????

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  Hello, I tried installing MediaPortal (http://www.team-mediaportal.com) on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3; 512mb DDR; 80GB IDE; K-World PVR-TV7131 Analog TV-Tuner; Inno3d FX5500 128mb 64bit; When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Can using higher rated battery damage device?

  - by Anwar Shah

  I am in need of a battery for my Lenovo 3000 Y410 Laptop. It's installed battery has voltage rating of 10.8v. But the shop i've consulted has only a battery of 11.1v rating. Should I buy the battery? I mean, Does using that battery can damage my laptop? An answer with some good source from hardware vendor will be very much helpful. Please do not just put your opinion. Because I do not see any difference in your opinion and my opinion. My opinion is also "It is bad". But I need some reliable source.

  Read the article

• Latitude E6410 - Screen flickering on Windows 8

  - by Martin

  On Windows 8, my Latitude E6410 screen (1440x900 - 60Hz - NVidia NVS3100M) is flickering. If I turn off the laptop for 30 minutes and turn it back on, there's no flickering but it eventually start again after 10-15 minutes. The flickering seems more present at the top and bottom of the screen. I already updated the graphic card drivers, bios, etc. Nothing seems to fix the issue. To prove that it isn't a hardware issue, when I reinstalled Windows 7 I couldn't reproduce the issue. Any idea what could cause this?

  Read the article

• Hosting provider that allows you to host your own VM image?

  - by Timo Geusch

  I've already looked at the 'Best Hosted VM Provider' question and checked the recommendations there, but I seem to have slightly odd requirements. Basically, I am looking for a host that allows me to host a VM image I supply (FreeBSD, which most of the suggested hosters don't support, they only seem to support various Linuxes) instead of one of their standard images. I'm a long time BSD user and have had colo BSD servers in the past so I'm pretty sure that i don't need much in the way of software support, but I'd basically like to run my server on managed hardware without having to rent the whole server. For the usage I have that would way OTT as we're talking a couple of small apps with very few users, a couple of blogs and (most importantly) email hosting for about 6-10 domains with moderate traffic levels. Oh, and reliability trumps cost to a certain extent.

  Read the article

• How can I easily identify all keyboard shortcuts (hotkeys) on OS X and current running Applications

  - by Michael Prescott

  By default, the function keys on my MacBook Pro control various hardware features and native operating system applications like the brightness of the LCD, Expose, or iTunes. I like these buttons and can use the fn button to take advantage of application Function keys when working with certain applications. Some service-type, background applications also have useful keyboard shortcuts. I tend to forget which keys are active at the moment and sometimes launch the wrong processes. Is there an application or operating system, native way of identifying all of the currently available keyboard shortcuts?

  Read the article

• Commercial version of Freenet6

  - by grnbeagle

  I've been using Freenet6 from gogoNET to make my mobile device publicly accessible via IPv6. It works quite well except that the service is not as stable because it's non-commercial usage only as their servers are hosted for free by different operators around the world. Apparently gogoNET sells hardware called gogoSERVER which allows one to build a service similar to Freenet6. I've inquired their sales team, but they were unable to tell me which companies have a commercial, production-quality implementation of Freenet6. Specifically I'm looking for the following features in IPv6 service provider: Client-based IPv6 connectivity for mobile devices: gogoCLIENT (gw6c) is ideal for mobile devices since it allows a device to go online regardless of the device's location. API for account maintenance: so that we can create device accounts from our software Static IPv6 address: (or maybe I mean IPv4 address) by this I mean, just like gogoNET6 service (username.broker.freenet6.net), we want to provide our users with a permanent URL for their device Any info on commercial IPv6 service provider utilizing gogoSERVER is appreciated. Thanks.

  Read the article

• What could explain my partitions disappearing on a new SSD with Windows 7?

  - by charlesrandall

  So this morning, I had a fresh install of Windows 7 pro, on a new SSD (Patriot TorqX 128gb), which I just put in to a new Dell Studio XPS 9000. Everything was fine. I booted to windows, no problem. I go to work. 8 hours later, I come home, and I'm greeted by my boot screen complaining about no bootable devices. Windows repair from the Windows 7 pro disk says it can't fix the problem. It doesn't see any windows installs. I boot up GParted, and my SSD is completely unallocated. No space used, no partitions. Perhaps this is related to allowing windows 7 to create a utility partition when I installed? Only thing I can think of. Is there some kind of known hardware issue that can result in an SSD completely wiping itself?

  Read the article

• msi netbook refuses to connect to home wireless network (windows xp)

  - by sa125

  Hi - I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• PS/2 vs USB keyboards: performance and energy consumption

  - by Mister Smith

  As far as I know, PS/2 keyboards are interrupt driven, while USB are polled. Typically a PS/2 keyboard was assigned IRQ_1 on Windows. I'm no hardware expert, but at a first glance seems like the PS/2 keyboards are more efficient. So here are my questions: On modern day computers, are PS/2 keyboard better (or faster), and if so, would it be noticeable at all? (e.g.: in gaming) Since they don't need polling, do PS/2 keyboards save energy compared to USB? (notice I'm not talking only about the peripheral here, but about the overall computer energy consumption). In case PS/2 had any advantage over USB, would adding a PS/2 adapter to my USB keyboard make the device as good as an actual PS/2 keyboard? Conversely, would adding a USB adapter to a PS/2 make it as bad as a USB KB? Thanks in advance.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• How to reset video/display drivers in Vista without restarting OS?

  - by jdk

  Currently I have to reboot my system if an external monitor is hooked up for it to be correctly detected and used. I think it would be faster to restart/reset the video or display drivers instead. How do I do this under Vista? I seem to remember from an old laptop using a Windows command-line command that would restart the wireless networking card device when it crashed. Is there something like that for video drivers? Background/Reason Because people rightfully ask why? - This is part of a larger problem which I'm waiting for resolution on from the manufacturer. In the meantime I'm looking for the above quick fix. Actually my video card often crashes my laptop when attaching an external monitor and trying to detect or use it. No solution from vendor yet and latest drivers do the same irksome behaviour. Windows says: A problem with your video hardware caused Windows to stop working correctly.

  Read the article

• Going from dev to sysadmin advice [on hold]

  - by dotnetdev

  I've seen the threads on here about transitions to/from sysadmin. My story is I am a dev (technology is irrelevant), but in learning that technology it required a lot of server infrastructure. In the last few years, I thus had to setup a lot of infrastructure (AD, DNS, SQL etc) to learn said technology. I've noticed that I've enjoyed doing sysadmin and got quite good at it, and find it even engrossing (e.g. I am amazed by how decievingly complicated AD is, under the hood). I'm now thinking of moving into IT infrastructure after about 4 years in various dev (.NET) roles. Any advice? My concern is that I don't have any experience with hardware load balancers and firewalls like F5 etc, which some jobs require. How could I compensate for that? Also, I'm rubbish with my hands, would this be a factor? (i.e. maintaining physical kit)? Thanks

  Read the article

• Computer not acknowledging sound card after move

  - by Angela

  We just got our computer back from having moved and when I tried to hook our speaker system, the computer keeps telling me that I don't have a sound system installed. It's a Dell computer with the original surround/subwoofer system that it came with and was working fine before the move. I tried buying a new speaker system (Logitech) to see if it would work, but still saying I have no audio device installed and it's not showing up in my device manager. I opened up the computer and unplugged the sound card, then plugged it back in, still nothing. I put the install disc from the sound card in the cd-rom, but it's saying that I have no sound device hardware in my system.

  Read the article

• Is it possible to rate-limit an scp/sftp/rsync transfer from the command-line? ie, manual QoS on a s

  - by warren

  Specifically, I am looking to rate-limit an scp or sftp session in the call itself. For example, let's say I want to copy 100MB to one server, and 1GB to another. I'd like to be able to run both of these at the same time, but maintain a QoS for "normal" computer usage - somewhat similar to how you can rate-limit bittorrent. Is there a way to do this without touching the networking hardware? I'm envisioning something akin to: magic-qos-tool 'scp file user@host:/path/to/file' Or.. scp -rate 40kbps file user@host:/path/to/file

  Read the article

• How can I be sure that the motherboard is dead and it's not another issue?

  - by Peter

  So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

  Read the article

• How to make phone calls using a phone

  - by user18151

  Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

  Read the article

• Installing VMware ESXi 4.0 on Dell 1950: Cannot open vmkboot.gz

  - by rlandster

  I am trying to install VMware ESXi 4.0.0 U1 on a Dell 1950 server via a bootable CD-ROM. I keep getting this error right at the start: Cannot open vmkboot.gz I checked that the CD-ROM drive is not to blame by installing Debian Etch using that drive. I tried several different versions of ESXi (3.5, 3.5 Dell edition, 4.0 Dell edition) and they all give me an error at the same place. I also tried installing from a USB "thumb" drive but got the same error. I checked with the VMware HCL (Hardware Compatibility List) and the Dell 1950 is listed as being compatible. Here are some server details: Two 1.6 GHz Xeon 5110 CPUs (ID: 06-0F-B) BIOS version 2.2.6 Any ideas on what might be the issue?

  Read the article

• How to check for bottlenecks in Windows Server 2008 R2

  - by Phil Koury

  I recently switched out a 10 year old server for a brand new server in a small office and upgraded from Windows Server 2000 to Windows Server 2008 R2. After the switch was complete and some configurations were changed around we are running into what appear to be some bottlenecks in the network speed. Accessing programs on the server is slower (resulting in long loading times, slower report generation, etc.) than it was on the old server hardware. I am wondering what options or tools I have, if there are any at all, to find out exactly where these hang ups might be coming from.

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >