Search Results

Search found 13537 results on 542 pages for 'installation failure'.

Page 282/542 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

  • Distributed website server redundancy

    - by Keith Lion
    Assume a website infrastructure is very complicated and is fully distributed (probably like most large web companies). Am I right in thinking that although there are all these extra web servers to handle multiple client requests, there is still a single "machine" whereby users must enter? I am guessing this machine will be the one physically associated to the IP address? I ask because I need to know whether, in places where distributed systems exist, there is still a single point of failure- usually the control node or, in this example, the machine connected to the public internet? Surely there cannot be two machines connected to the internet, as they would have to have different IP addresses? This "machine" may not be a server per se, but maybe it is a piece of cisco equipment. I just need to know whether, in the real world, these distributed systems still have a particular section where they depend on the integrity of one electronic device?

    Read the article

  • Server rack recommendations

    - by Dan
    I'm putting servers on a rack for the first time, and am thinking a 4-post open frame rack is adequate for my needs. I'm putting in a few HP DL 385's and a few other things. What I'm wondering is if there's reason to be picky about the rack selection. I'm not concerned about heat or size - just installation and fit. Any recommendations or considerations?

    Read the article

  • Failing RAM, or something else? [closed]

    - by Thanatos
    I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

    Read the article

  • Server with 3 Disk, what's the best HD Configuration?

    - by aleroot
    I Have an HP Server with a quad core Opteron and 3 Disk 250Gb S-ATA Disk, i'm thinking about what's the best configuration of the disk for performance and reliability. There is mainly 2 scenario : -RAID 5 with these 3 HD (on the the array 100GB Partition for OS, Other Space for Data Partition) -RAID 1 + 1 Disk for OS (one single Disk OS Installation, RAID 1 Array for a Data Partition) What's the best configuration ? In the Server Run MySQL and Small Document File server, the OS to be installed is Windows Server 2008 ...

    Read the article

  • What is the fastest RAID in practise?

    - by Luke
    I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

    Read the article

  • Error installing Google Chrome on Windows XP (on VirtualBox)

    - by Ognjen
    I am having some problems with my freshly installed Windows XP on VirtualBox. I tried installing Google Chrome on it, and the error I get is: Google Update installation failed with error 0x80040890 It is genuine Windows with SP3. I also tried using VMware player, but it has the same problem. When the same Windows is installed on a real machine, there is no problem. Any ideas what might be the cause?

    Read the article

  • install mingw and msys to run c programs on windows

    - by Hesham Abouelsoaod
    I installed MinGW by using mingw-get-inst-20111118.exe and it works but it is very slow! i don't want to install it online, i remember that i have previously installed MinGW and msys by using two files mingw.exe and msys.exe without using the internet and it was great, but now i cant repeat what i have done and i cant find a link to mingw.exe! please i want a simple steps for offline better installation? thanks

    Read the article

  • Laptop crashes when connecting to external harddisk

    - by Gnot
    I recently had a problem with my laptop. when I booted up the machine, I would get a SMART failure error message and when I pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. Thinking that my hard disk was dying, I bought a new hard disk and installed on my laptop and so now my laptop is alright. However I need to recover data from that old hard disk, so I bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. The first few times when I connected, I could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. But now whenever I connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. Do you think my old hard disk is dead beyond repair? Or you can offer some help here? Any assistance would be appreciated!

    Read the article

  • Creating rescue / install USB flash disk for CentOS

    - by wwwpanda
    For CentOS installation CDs, you can install OS, as well as booting into "rescue" mode so that you can do a chroot mount on the system partition for problem solving, even the system is installed in hardware RAID drives. How can we create a similar thing but on usb flash drive? I tried to do it with unetbootin, but when booting into the USB, eventually the CentOS setup still requires presence of CDs. Ultimately, I want to use this usb flash drive for remote disaster recovery through say HP iLo remote console / Dell iDrac etc.

    Read the article

  • MYSQL Permission: Access denied for user 'debian-sys-maint'@'localhost

    - by Jannemans
    Got a problem with a mysql server installation on Debian. (Not my server so I have no idea what caused this...) Installing new applications that add a database fail with error: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) I can log in with the user, I've flushed permissions... Then I can across this question: http://stackoverflow.com/questions/1709078/how-can-i-restore-the-mysql-root-users-full-privileges But when I try to stop mysql, it fails with error: 'Access denied for user 'debian-sys-maint'@'localhost' (using password: YES)'

    Read the article

  • using wbadmin to backup and recover

    - by g7rpo
    HI I am using wbadmin to perform backups of a specific folder, primarily to backup my VHD files this is working fine but I tried to recover the files today using a different machine to the one which created the backup and couldnt get the machine doing the recovery to 'see' the backups. Is there a way to do this as my worry is that if I have a failure on the host which is perfmorming the backups I need to be able to install hyper-v on another host and recover the backed up VMs to there until I can rebuild the host. It appears that this isnt possible, I am hoping I am missing something. Any help would be greatly appreciated.

    Read the article

  • How do I fix cfdisk error: "Partition ends in final partial cylinder"?

    - by Laurens
    The problem I want to install Arch Linux on my desktop, it is going to be a dual boot with Windows. I booted into the installation CD, but when I started cfdisk to partition my hard drive it gave me the following error: FATAL ERROR: Primairy parititon 1, partition ends in the final partial cylinder. The Question How can I troubleshoot and fix this? Additional details These will be added if asked for.

    Read the article

  • Cannot use `su` or `sudo` after set up key-based access to SSH

    - by OrangeTux
    I'm following this tuturial to setup key-based access to the SSH I created a user. I add copy the key to the client via ssh-copy-id <username>@<host> Becasuse ssh <username>@<host> still prompts for a password I run ssh-add on the local machine. The terminal doens't prompt for a password, I can login without using a password. But I cannot run su anymore. Every input for the password results in Authentication failure. I tried it again. But before coping the key, I added to the sudoer file. Copied key, ssh-add. But now I cannot login to my SSH shell att all? How can I setup a key-based SSH access with the possibiluty to use su or sudo?

    Read the article

  • Can I copy a cross compiler tool chain between systems (I did before)?

    - by Jamie
    I tested fairly extensively with Ubuntu 10.04 Beta 2 Server in a VM, and was able to simply copy (read tar x) a cross compiled tool chain from an Ubuntu 8.10 VM. I created the tar myself, which is essentially a lot of stuff in \usr\local. Now that I've got a bare metal installation of Ubuntu 10.04 proper, the copy isn't working. In particularly, I'm getting the error: $ arm-linux-gcc -bash: /usr/local/bin/arm-linux-gcc: No such file or directory I've got the systems side by side in SSH windows ... any suggestions?

    Read the article

  • How to backup mirror copies of C: drive?

    - by metal gear solid
    I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

    Read the article

  • Win Server 2008 R2 SP1 Repair Disk

    - by Horst Walter
    Is there nothing like "creating a repair disk" for Win Server 2008 R2 SP1. Or am I just missing it? Under Win7 I do just enter "Repair" and it finds "create a repair disk". Sorry - but I am not a professional Admin. Just using the server for my development environment. If there is no repair disk, is there something similar or something I should create in case I do have a system failure? Sure, a full backup is done, but anything else?

    Read the article

  • reconfiguring php? or do I have to reinstall?

    - by matthewsteiner
    Alright, so I need the soap extension enabled in php. When I run phpinfo(), it's not there, so I'm guessing I have to recompile? I can follow tutorials online to recompile the most recent php version for centos, but will it generally just work after that? Or does apache need to know to use the new installation? Thanks for any direction you can give me.

    Read the article

  • New power supply, now computer doesn't recognise hard drive?

    - by Mike
    Ok, I bought a new power supply, because my old one was too damn loud. I hooked it up to my PC, turned it on, everything is looking fine, start up detects my DVD drive, 2 hard disks.. then I get the message "BOOT FAILURE INSERT SYSTEM DISK". Now I've seen some other people talk about going into BIOS and changing the start up to the HDD and not the CD.. well I've done that and it doesn't help. If I let windows load up and it asks me to which partition I wish to install windows, no partition is present. It's as if after the initial start up the drives arn't being found. I plugged my old (but loud) PSU back in, connected up all the cables, and it works perfectly. Why does the new PSU not detect my HDD's after the first BIOS screen start up? Any ideas? :)

    Read the article

  • Why specifying keyboard layout?

    - by amyassin
    Most operating systems (if not all) asks about the keyboard layout during installation. Why do they need to know the layout? I mean, when pressing key, does the keyboard send a specific signal indicating what it represents (if so, why needing to specify the layout?) or it sends a signal indicating its position (the second raw, third key) and then the OS detects what key is that from the layout specified?

    Read the article

  • Missing WYSIWYG controls in Trac

    - by 01es
    I'm not sure whether this was the case right after the Trac installation or as the result of some misconfiguration. Below is a screecapture of a wikipage in the edit mode, where the standard WYSIWYG controls (expected to be present just above the text input in the left corner) are missing. In an attempt to solve the issue, TracWysiwygPlugin was installed, but this has not changed the situation. What could be the reason for missing WYSIWYG controls and how could it be fixed?

    Read the article

  • Nginx bad gateway and connection errors

    - by r2b2
    I've followed this tutorial for a basic installation of nginx. I always get bad gateway errors and when i look at the logs i see : [error] 3226#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client Here is my nginx.conf and contents of my sites-available/defaults nginx.conf, defaults I am also seeing this error : conflicting server name "explorable.com" on 0.0.0.0:80, ignored I am using Ubuntu 12.04, PHP5-FPM Thank you!

    Read the article

  • How do you create a SQL query in Excel 2007 with a dynamic date range?

    - by Jordan
    I am trying to create a reporting spreadsheet that can print reports for a given time period. The query below works, but when I try to use a "?" parameter in place of the date, I get an error after selecting a cell containing my date. If I use single quotes ('?') I get a conversion from string to date/time failure, if I don't (?) I get a syntax error near @p1. Eventually I will need either a start and end date or a formula adding a month or shift to the starting date/time to filter the data down to important information. The query was built in Microsoft Query. SELECT FloatTable.DateAndTime, TagTable.TagName FROM master.dbo.FloatTable FloatTable, master.dbo.TagTable TagTable WHERE FloatTable.TagIndex = TagTable.TagIndex AND ((FloatTable.DateAndTime={ts '2012-06-01 00:00:00'})) Any assistance would be much appreciated. Thanks in advance.

    Read the article

  • How can I uninstall Fedora on a dual boot system without a Windows CD?

    - by David B
    I'm running a dual boot system with Windows XP and Fedora 13. I would like to uninstall Fedora 13 and remain with Windows XP only. This fedora document says I need to boot from a Windows XP installation CS to fix the MBR. Is there a way to do that without using the CD (I'm working in a company where I got my computer up and running with XP. Getting the CD will require me contact the system admins which might take some time).

    Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >