Search Results

Search found 10244 results on 410 pages for 'space complexity'.

Page 282/410 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

• What's a good bit of JS or JQuery for horizontally scrolling news ticker

  - by Graphain

  Hi, I am looking for a little bit of JQuery or JS that allows me to produce a horizontally scrolling "news ticker" list. The produced HTML needs to be standards compliant as well. I have tried liScroll but this has a habit of breaking (some content ends up on a second line at the start of the scroll), especially with longer lists. I have also tried this News Ticker but when a DOCTYPE is included the scrolling will jolt rather than cycle smoothly at the end of each cycle. Any suggestions are appreciated. Edit So thanks to Matt Hinze's suggestion I realised I could do what I wanted to do with JQuery animate (I require continuous scrolling not discrete scrolling like the example). However, I quickly ran into similar problems to those I was having with liScroll and after all that realised a CSS issue (as always) was responsible. Solution: liScroll - change the default 'var stripWidth = 0' to something like 100, to give a little space and avoid new line wrapping.

  Read the article

• Huge dataset point in polygon in .net (collision detection)

  - by Rickard Liljeberg

  I have a pretty big mesh with polygons, usually triangles but sometimes rectangles. Each point in my mesh has a value (value has nothing to do with coordinates). Now I am creating a second mesh in the same coordinate-space as the old mesh. I now want to interpolate out values for all points (vertices) in the new mesh using the values from the old mesh. Now I could loop each polygon in the new mesh and detect which old vertices are in each polygon by making 2d collision detection (altho even this I don't get to function properly so if anyone has simple and fast code for 2d collision detection (triangle is enough) I would gladly see it). However to my main point again. looping each old vertice for each new polygon seems less than efficient. is there a better way?

  Read the article

• Mix RGB colors (L*a*b*)

  - by Samuel

  Hello! Basically I want two mix two colours color1 and color2. Since simple calculation's bring up stuff like blue+yellow = grey ((color1.r + color2.r)/2 etc) i did some research and found that apparently mixing colors in order for the mixed color to look like we expect it too (e.g. blue+yellow = green) isn't that straight forward. What another stackoverflow post taught me was that in order two achieve the mixture correctly i'd have to use the L*a*b* space / CIELAB and linked to the wikipedia page about this topic. I found it informative but i couldn't really understand how to convert RGB to (sRGB and than to) L*a*b* - how to mix the obtained colors and how to convert back I hope somebody here can help me Thanks, Samuel

  Read the article

• How to connect an existing wizard generated data set to a different server(same database) at run tim

  - by Kiril

  Hello, I am coding a simple space empire management game in Visual C# 2008, which relies on connecting to a remote SQL server database to get/store data. I would like the user to be able to connect to a user-specified SQL server from the login screen(he specifies IP address, port, database name, ID, password and presses "connect" button). However, I found out that the Dataset connection string property is read only and cannot be changed. Is there any way to guide the wizard-generated DataSet to a user-specified server at run time? Thanks in advance.

  Read the article

• Prevent line break between two elements in CSS

  - by Paul Alexander

  For some basic layout work I'm doing, I'd like links that immediately follow a price to always be shown on the same line as the price. The price text is wrapped in a <span class="price"> tag while the link uses the buy-link class as in <a href="/buy" class="buy-link">Buy Now</a>. I'm looking for CSS that will automatically prevent line breaking between the span and a tag but I'm either missing something or it can't be done. I can easily prevent line breaks within the two tags - but not between them. I want to avoid wrapping both tags in a span with a white-space: nowrap manually and use pure CSS if possible.

  Read the article

• On-the-fly lossless image compression

  - by geschema

  I have an embedded application where an image scanner sends out a stream of 16-bit pixels that are later assembled to a grayscale image. As I need to both save this data locally and forward it to a network interface, I'd like to compress the data stream to reduce the required storage space and network bandwidth. Is there a simple algorithm that I can use to losslessly compress the pixel data? I first thought of computing the difference between two consecutive pixels and then encoding this difference with a Huffman code. Unfortunately, the pixels are unsigned 16-bit quantities so the difference can be anywhere in the range -65535 .. +65535 which leads to potentially huge codeword lengths. If a few really long codewords occur in a row, I'll run into buffer overflow problems.

  Read the article

• Bounding Boxes for Circle and Arcs in 3D

  - by David Rutten

  Given curves of type Circle and Circular-Arc in 3D space, what is a good way to compute accurate bounding boxes (world axis aligned)? Edit: found solution for circles, still need help with Arcs. C# snippet for solving BoundingBoxes for Circles: public static BoundingBox CircleBBox(Circle circle) { Point3d O = circle.Center; Vector3d N = circle.Normal; double ax = Angle(N, new Vector3d(1,0,0)); double ay = Angle(N, new Vector3d(0,1,0)); double az = Angle(N, new Vector3d(0,0,1)); Vector3d R = new Vector3d(Math.Sin(ax), Math.Sin(ay), Math.Sin(az)); R *= circle.Radius; return new BoundingBox(O - R, O + R); } private static double Angle(Vector3d A, Vector3d B) { double dP = A * B; if (dP <= -1.0) { return Math.PI; } if (dP >= +1.0) { return 0.0; } return Math.Acos(dP); }

  Read the article

• Zend currency custom format like "$ 1,234.56 USD"

  - by Jorre

  I'm using the zend currency module to manage currencies in a web app. I can't figure out how to create a custom format for my currencies, since there are no examples on the documentation pages: http://framework.zend.com/manual/en/zend.currency.options.html From what I read there, I could use the format parameter to set a format, but I can't find a way how. Does anyone have a good code example for this problem? currently I do the following: $currency->setFormat(array (display' => Zend_Currency::USE_SYMBOL)); That works to display only the symbol, but I'm also interested in putting an extra space after or before the symbol and to display currencies like this: "$ 1,234.56 USD" "€ 1.234,56 EUR"

  Read the article

• Storing index values in FAST-ESP without modifications

  - by Abel Morelos

  Hi, first of all I'm totally new to FAST but I already have a couple of issues I need to solve, so I'm sorry if my questions are very basic =) Well, the problem is that I have a field in the FAST index which in the source document is something like "ABC 12345" (please note the intentional whitespaces) but when stored in the index is in the form "ABC 123456" (please note that now there is a single space). If I retrieve all the document values then this specific value is OK (with all the whitespaces), my only problem is with the way the value is stored in the index since I need to retrieve and display it to my user just like it appears in the original document, and I don't want to go to the full document just for this value, I want the value that I already have in the index. I think I need to update one of the FAST XML configuration files but I don't have enough documentation at hand in order to decide where to perform the change, index_profile.xml? in the XMLMapper file?

  Read the article

• [C#] how do I get the height of a rich text content after word wrap?

  - by Led

  Question A. Given 1. A string in rich text format that may have paragraph, tabs, space, line break, indentation, (or even image?) 2. A width for the word wrapping rich text control/editor How do I know the height of the content after it have performed all the word wrapping? Is there something like int MeasureRichTextHeightAfterWordWrap(string aRichTextContent, int aWidth)? Otherwise how does those rich text control know how much to autosize? Do I have to actually place the content on a dummy rich text control and get its height afterwards? Question B. Similar to question A but in plain text onto a plain text memo/control/editor. And manually draw string with manually calculated indentations, breaks, word wrappings. Is it easier or harder?

  Read the article

• Indexing only one MySQL column value

  - by BrainCore

  I have a MySQL InnoDB table with a status column. The status can be 'done' or 'processing'. As the table grows, at most .1% of the status values will be 'processing,' whereas the other 99.9% of the values will be 'done.' This seems like a great candidate for an index due to the high selectivity for 'processing' (though not for 'done'). Is it possible to create an index for the status column that only indexes the value 'processing'? I do not want the index to waste an enormous amount of space indexing 'done.'

  Read the article

• Why did my flash drive become "read only" and (how) can I fix it?

  - by Bob

  I have a brand new flash drive (one week old) that has become marked as read only, by Windows, Kubuntu and a bootable partitioner. Why did this happen? Is it fixable? If it is, how can I fix this? The problem Firstly, this drive is new. It's certainly not been used enough to die from normal wear and tear, though I would not discount defective components. The drive itself has somehow become locked in a read only state. Windows' Disk management: Diskpart: Generic Flash Disk USB Device Disk ID: 33FA33FA Type : USB Status : Online Path : 0 Target : 0 LUN ID : 0 Location Path : UNAVAILABLE Current Read-only State : Yes Read-only : No Boot Disk : No Pagefile Disk : No Hibernation File Disk : No Crashdump Disk : No Clustered Disk : No What really confuses me is Current Read-only State : Yes and Read-only : No. Attempted solutions So far, I've tried: Formatting it in Windows (in Disk management, the format options are greyed out when right clicking). DiskPart Clean (CLEAN - Clear the configuration information, or all information, off the disk.): DISKPART> clean DiskPart has encountered an error: The media is write protected. See the System Event Log for more information. There was nothing in the event log. Windows command line format >format G: Insert new disk for drive G: and press ENTER when ready... The type of the file system is FAT32. Verifying 7740M Cannot format. This volume is write protected. Windows chkdsk: see below for details Kubuntu fsck (through VirtualBox USB passthrough): see below for details Acronis True Image to format, to convert to GPT, to destroy and rebuild MBR, basically anything: failed (could not write to MBR) Details (and a nice story) Background This was a brand new, generic, 8GB flash drive I wanted to create a multiboot flash drive with. It came formatted as FAT32, though oddly a little larger than most 8 GIGAbyte flash drives I've come across. Approximately 127MB was listed as "used" by Windows. I never discovered why. The end usable space was about what I normally expect from a 8GB drive (approx 7.4 GIBIbytes). I had thrown quite a few Linux distros on, along with a copy of Hiren's. They would all boot perfectly. They were put on with YUMI. When I tried to put the Knoppix DVD on, YUMI added an odd video option to its boot comman which caused Knoppix to boot with a black screen on X. ttys 1 through 6 still worked as text only interfaces. A few days later, I took some time to take that odd video option off, making the boot command match the one that comes with Knoppix. On the attempt to boot, Knoppix reported some form of LZMA corruption. Leading up to the current issue I was thinking the Knoppix files may have been corrupted somehow, so I tried reloading it. The drive was nearly full (45MB free), so I deleted a generic ISO that also was not booting. That went fine. I then went through YUMI to 'uninstall' Knoppix, i.e. delete files and remove from the menus. The files went first, then the menus were cleared successfully. However, the free space was stuck at about 700MB, same as it was before removing Knoppix. In the old Knoppix folder, there was a 0 byte file named KNOPPIX that could not be deleted. I tried reinserting the drive to delete this file - without safely removing, if that made a difference (hey, first time for everything). Running the standard Windows chkdsk scan without /r or /f reported errors found. Running with /r just got it stuck. I decided to give fsck a shot, so I loaded up my Kubuntu VM and attached the drive to it with VirtualBox's USB 2.0 passthrough. I umounted it (/dev/sda1) and ran a fsck. There are differences between boot sector and its backup. I chose No action. It told me FATs differ and asked me to select either the first or second FAT. Whichever I selected, I got a notice of Free cluster summary wrong. If I chose Correct, it gave a list of incorrect file names. To try to fix something, at least, I ran it with the -p option. Halfway through fixing the files, the VM froze - I ended its process about ten minutes later. Cause? My next attempt was to use YUMI, again, to rebuild the whole drive. I used YUMI's built in reformat (to FAT32) option and installed a Kubuntu ISO (700MB). The format was successful, however, the extract and copy of Kubuntu (which YUMI uses a 7zip binary for) froze at about 60% done. After waiting for about fifteen minutes (longer than the 3.5GB Knoppix ISO took last time), I pulled the drive out. The drive at this point was already formatted, SYSLINUX already installed, just waiting on the unpacking of an ISO and the modifying of the boot menus. Plugging it back in, it came up as normal - however, any write action would fail. Disk management reported it as read only. On reconnect, it would come up as normal but a write operation would cause it to go read only again. After a few attempts, it started coming up as read only on insertion. Attempts to fix This is when I ran through the attempts listed above, to try and reformat it in case of a faulty format. However the inability to do so even on a bootable disk indicated something more serious is wrong. chkdsk now reports nothing is wrong, and fsck still reports MBR inconsistencies, but now always chooses first FAT automatically after telling me FATs differ. It still does the same Free cluster summary wrong afterwards. I cannot run with -p anymore because it is now marked as read only. It also managed to corrupt my VM's disk somehow on the first attempt (yes, I'm sure I chose sda, which is mapped to a 7.4GB drive - I triple checked). Thank god for snapshots? I'm just about out of ideas. To my inexperienced mind it looks like something in the drive's firmware set it to read only "permanently" somehow - is there any way to reset this? I don't particularly care about keeping data, considering I've reformatted it twice. Also, fixes that keep me in Windows are better; it reduces the risk of me accidentally nuking my main hard drive. Update 1: I pulled apart the drive out of curiosity. As you can see, there are no obvious write protect switches. There is an IC on the other side, ALCOR branded labelled AU6989HL, if that matters. If there appears to be no way to fix this, I'll probably pull out the (glued down) card and put it in a card reader to check if it's the card or the controller that died. Update 2: I've pulled the card off, Windows detects the drive as a card reader now. The contacts on the card don't appear to be used, and there are several rows of holes on the card itself. Putting it into the card reader only detects about 30MB total, RAW. It's probably either the reader incorrectly reporting the card as faulty (as if a real SD card's write protect was switched on) or a bad contact somewhere. If nothing else, I have a spare 8GB Micro SD card now... as soon as I figure out how to format it as 8GB.

  Read the article

• Regular expression replace in PL/pgSQL

  - by dreamlax

  If I have the following input (excluding quotes): "The ancestral territorial imperatives of the trumpeter swan" How can I collapse all multiple spaces to a single space so that the input is transformed to: "The ancestral territorial imperatives of the trumpeter swan" This is going to be used in a trigger function on insert/update (which already trims leading/trailing spaces). Currently, it raises an exception if the input contains multiple adjacent spaces, but I would rather it simply transforms it into something valid before inserting. What is the best approach? I can't seem to find a regular-expression replace function for PL/pgSQL. There is a text_replace function, but this will only collapse at most two spaces down to one (meaning three consecutive spaces will collapse to two). Calling this function over and over is not ideal.

  Read the article

• Extracting a string starting with x and ending with y

  - by DMan

  First of all, I did a search on this and was able to find how to use something like String.Split() to extract the string based on a condition. I wasn't able to find however, how to extract it based on an ending condition as well. For example, I have a file with links to images: http://i594.photobucket.com/albums/tt27/34/444.jpghttp://i594.photobucket.com/albums/as/asfd/ghjk6.jpg You will notice that all the images start with http:// and end with .jpg. However, .jpg is succeeded by http:// without a space, making this a little more difficult. So basically I'm trying to find a way (Regex?) to extract a string from a string that starts with http:// and ends with .jpg

  Read the article

• How do I design the file storage issue?

  - by user102533

  I am working on an application that creates video files and stores them in a folder in the C:\ drive. I speculate that there will be a large number of these files in the future and we would run out of disk space at some point of time (on our VPS). When the time comes that we have to upgrade, we either plan to use one of the Cloud providers to store files or our existing provider can add another disk (say D:\ drive). Either way, I would want to design the app now in a way that in future, moving to different locations would not be an issue and would be transparent to the end user. The code that creates these files supports 2 ways: myObj.SetOutputToDisk(<path to store>); or myObj.SetOutputToMemoryStream(ms); If we go with the Cloud architecture, I assume we might have the following combination: Cloud Files + Existing VPS or Cloud Files + Cloud Windows Server Given the unknowns at this time, how would I go about designing this?

  Read the article

• Unit Testing Codeigniter Classes with fooStack - clashes

  - by DrPep

  I'm having 'fun' testing interactions in a CodeIgniter based web app. It seems when running the entire test suite "phpunit AllTests.php" it loads all of the test classes, their targets (Systems under Test) and creates a PHPUnit_Framework_TestSuite instance which presumably iterates over the classes which extend CIUnit_TestCase and runs them. The problem comes where you have multiple classes referencing another class (such as a library). As all the classes are loaded into the same process space, PHP reports "cannot redefine class xyz". Have I missed something here or doing something haenously wrong? In my test class i'm doing something like: include_once dirname(__FILE__).'/../CIUnit.php'; include_once dirname(__FILE__).'/../../libraries/ProductsService.php'; class testProductsService extends CIUnit_TestCase { public function testGetProducts_ReturnsArrayOfProducts(){ $service = new ProductsService(); $products = $service->getProducts(); $this->assertTrue(is_array($products)); } } The problem manifests as I have a controller which does: $this->load->library('ProductsService');

  Read the article

• Default Values in XForms Input

  - by Josh

  I have an XForm that has certain fields that may often be left blank (optional street address). Is there is technique to set a default value for that field, preferably a space (I am running into weird formatting issues with CSS). The html form way of value="" doesn't work, neither does setting a default value in the XML schema. EXAMPLE: <xforms:input ref="clientaddress/streetaddress2" model="model_inventory" > <xforms:label>Street Address (Line 2)</xforms:label> Leaving this field blank results in <streetaddress2/> in the resulting xml document I want <streetaddress> </streetaddress>

  Read the article

• redoing object model construction to fit with asynchronous data fetching

  - by Andrew Patterson

  I have a modeled a set of objects that correspond with some real world concepts. TradeDrug, GenericDrug, TradePackage, DrugForm Underlying the simple object model I am trying to provide is a complex medical terminology that uses numeric codes to represent relationships and concepts, all accessible via a REST service - I am trying to hide away some of that complexity with an object wrapper. To give a concrete example I can call TradeDrug d = Searcher.FindTradeDrug("Zoloft") or TradeDrug d = new TradeDrug(34) where 34 might be the code for Zoloft. This will consult a remote server to find out some details about Zoloft. I might then call GenericDrug generic = d.EquivalentGeneric() System.Out.WriteLine(generic.ActiveIngredient().Name) in order to get back the generic drug sertraline as an object (again via a background REST call to the remote server that has all these drug details), and then perhaps find its ingredient. This model works fine and is being used in some applications that involve data processing. Recently however I wanted to do a silverlight application that used and displayed these objects. The silverlight environment only allows asynchronous REST/web service calls. I have no problems with how to make the asychhronous calls - but I am having trouble with what the design should be for my object construction. Currently the constructors for my objects do some REST calls sychronously. public TradeDrug(int code) { form = restclient.FetchForm(code) name = restclient.FetchName(code) etc.. } If I have to use async 'events' or 'actions' in order to use the Silverlight web client (I know silverlight can be forced to be a synchronous client but I am interested in asychronous approaches), does anyone have an guidance or best practice for how to structure my objects. I can pass in an action callback to the constructor public TradeDrug(int code, Action<TradeDrug> constructCompleted) { } but this then allows the user to have a TradeDrug object instance before what I want to construct is actually finished. It also doesn't support an 'event' async pattern because the object doesn't exist to add the event to until it is constructed. Extending that approach might be a factory object that itself has an asynchronous interface to objects factory.GetTradeDrugAsync(code, completedaction) or with a GetTradeDrugCompleted event? Does anyone have any recommendations?

  Read the article

• Useful Eclipse Java Code Templates

  - by Jon

  You can create various Java code templates in Eclipse via the Window->Preferences->Java -> Editor -> Templates e.g. sysout is expanded to: System.out.println(${word_selection}${});${cursor} You can activate this by typing sysout followed by CTRL+SPACE What useful Java code templates do you currently use? Include the name and description of it and why it's awesome. There's an open bounty on this for an original/novel use of a template rather than a built-in existing feature. Create Log4J logger Get swt color from display Syncexec - Eclipse Framework Singleton Pattern/Enum Singleton Generation Readfile Const Traceout Format String Comment Code Review String format Try Finally Lock Message Format i18n and log Equalsbuilder Hashcodebuilder Spring Object Injection Create FileOutputStream

  Read the article

• MS Word paste into tinymce - retain tabulators

  - by jdog

  Hi, I have a 5 year old web application which runs tinymce 2.0.5.1 In this version it is possible - in IE 6,7,8 only to paste from MS Word and retain the tab characters. What we have done is to add a callback: paste_insert_word_content_callback : "findtabs" function findtabs(type, content) { if (type == "before"){ content = content.replace(/( This functionality is important to the client as they have 100s of MS Word documents of quote templates which use tabulators for formatting. Because of another problem suspected to be caused by TinyMCE, we'd like to upgrade to the current TinyMCE version 3.2.7 However in this version the resulting paste code does not contain anything that seems to 100% link to a tabulator. If pasted into an empty textarea, I get something like , if pasted into a I simply a space character. Can anyone recommend how to detect tabulators when pasting from MS Word?

  Read the article

• NSTimer as a self-targeting ivar.

  - by Matt Wilding

  I have come across an awkward situation where I would like to have a class with an NSTimer instance variable that repeatedly calls a method of the class as long as the class is alive. For illustration purposes, it might look like this: // .h @interface MyClock : NSObject { NSTimer* _myTimer; } - (void)timerTick; @end - // .m @implementation MyClock - (id)init { self = [super init]; if (self) { _myTimer = [[NSTimer scheduledTimerWithTimeInterval:1.0f target:self selector:@selector(timerTick) userInfo:nil repeats:NO] retain]; } return self; } - (void)dealloc { [_myTimer invalidate]; [_myTImer release]; [super dealloc]; } - (void)timerTick { // Do something fantastic. } @end That's what I want. I don't want to to have to expose an interface on my class to start and stop the internal timer, I just want it to run while the class exists. Seems simple enough. But the problem is that NSTimer retains its target. That means that as long as that timer is active, it is keeping the class from being dealloc'd by normal memory management methods because the timer has retained it. Manually adjusting the retain count is out of the question. This behavior of NSTimer seems like it would make it difficult to ever have a repeating timer as an ivar, because I can't think of a time when an ivar should retain its owning class. This leaves me with the unpleasant duty of coming up with some method of providing an interface on MyClock that allows users of the class to control when the timer is started and stopped. Besides adding unneeded complexity, this is annoying because having one owner of an instance of the class invalidate the timer could step on the toes of another owner who is counting on it to keep running. I could implement my own pseudo-retain-count-system for keeping the timer running but, ...seriously? This is way to much work for such a simple concept. Any solution I can think of feels hacky. I ended up writing a wrapper for NSTimer that behaves exactly like a normal NSTimer, but doesn't retain its target. I don't like it, and I would appreciate any insight.

  Read the article

• how to better use of eclipse code templates (PHP)?

  - by pocketfullofcheese

  One particular problem I was having was using ${word_selection} in an Eclipse PDT template. I was recently trying to use some code templates with Eclipse PDT 2.1 to speed up some common tasks. We use a lot of getters/setters, so I wrote the following template. function get${word_selection}() { return $$this->getData('${word_selection}'); } function set${word_selection}($$${word_selection}) { $$this->setData('${word_selection}', $$${word_selection}); } I named the template "getset" and the only way I know to use the Code Assist is to type: "getset" then hit my code assist keys (I have it set to Esc, but I think the default was Ctrl+Space). The problem is, this doesn't actually let me select a word to be used by the ${word_selection}. how do I type in my template name, hit the key combo, and have a word selected all at the same time? I also want to know what kinds of templates people have set up and any other tips for using templates to speed of programming.

  Read the article

• Are jQuery and GWT comparable frameworks?

  - by lomaxx

  At work there's a bit of discussion around what client side framework we should use for our front end web applications. Currently it's a showdown between GWT and jQuery and I'm kind of on the fence but leaning towards jQuery. From what I can tell, GWT and jQuery are trying to solve different problems but are compared to each other because they both end up existing in the web applications space. I suspect that if this is the case, then comparing the two may be fruitless so what I'm trying to get my head around is if comparing jQuery to GWT is even an apples to apples comparison in the same way that jQuery and ExtJS can be compared, or would it be more beneficial for our team to ask certain questions of our application and use the answers to determine which framework is a better fit for us?

  Read the article

• Opposite of nl2br? Is it str_replace?

  - by Julian H. Lam

  So the function nl2br is handy. Except in my web app, I want to do the opposite, interpret line breaks as new lines, since they will be echoed into a pre-filled form. str_replace can take <br /> and replace it with whatever I want, but if I put in \n, it echoes literally a backslash and an n. It only works if I put a literal line break in the middle of my script, and break the indentation (so there are no trailing space). See: <?=str_replace('<br />',' ',$foo)?> Am I missing escape characters? I think I tried every combination...

  Read the article

• OutOfMemoryError trying to upload to Blobstore locally

  - by jeanh

  Hi all, I am trying to set up a basic file upload to blobstore, but I get this OutOfMemoryError: WARNING: Error for /_ah/upload/ aghvbWdkcmVzc3IcCxIVX19CbG9iVXBsb2FkU2Vzc2lvbl9fGMACDA java.lang.OutOfMemoryError: Java heap space at java.util.Arrays.copyOf(Arrays.java:2786) at java.io.ByteArrayOutputStream.write(ByteArrayOutputStream.java:71) at javax.mail.internet.MimeMultipart.readTillFirstBoundary(MimeMultipart.java: 316) at javax.mail.internet.MimeMultipart.parse(MimeMultipart.java:186) at javax.mail.internet.MimeMultipart.getCount(MimeMultipart.java:109) at com.google.appengine.api.blobstore.dev.UploadBlobServlet.handleUpload(UploadBlobServlet.java: 135) at com.google.appengine.api.blobstore.dev.UploadBlobServlet.access $000(UploadBlobServlet.java:72) at com.google.appengine.api.blobstore.dev.UploadBlobServlet $1.run(UploadBlobServlet.java:100) at java.security.AccessController.doPrivileged(Native Method) at com.google.appengine.api.blobstore.dev.UploadBlobServlet.doPost(UploadBlobServlet.java: 98) at javax.servlet.http.HttpServlet.service(HttpServlet.java:713) at javax.servlet.http.HttpServlet.service(HttpServlet.java:806) at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java: 511); I used the Memory Analyzer on Eclipse and it said that the memory leak suspect is QueuedThreadPool. I found this information about a memory leak bug: http://jira.codehaus.org/browse/JETTY-1188 Has anyone else had this issue? Thanks, Jean

  Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >