Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 283/1027 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• Network Load Balancing, intermittent port problem on Windows Server 2008

  - by Jimmy Chandra

  Trying to troubleshoot an intermittent problem on a Windows Server 2008 NLB. I think it might be related to an NLB issue. We are using Windows Network Load Balancing to balance load for our multiserver SharePoint front ends. Say... Web Front End 1 IP is 192.168.1.100 and Web Front End 2 IP is 192.168.1.101, the NLB is setup to load balance both WFE servers on any incoming traffic to the IP 192.168.1.200. Sometimes we got an intermittent issue where when we try to access the SharePoint site using 192.168.1.200:8080 (say the site is set up to run on port 8080) from a remote client, it will display page not found. Pinging the 192.168.1.200 will give responses, but when trying to telnet to 192.168.1.200:8080 it just won't connect. However, browsing the SharePoint site directly on individual WFE (192.168.1.100 and 192.168.1.101) show no problem whatsoever. My guess also (we didn't get a chance to try it yet, but I think it should work), if I try connecting remotely to individual server, it will respond just fine. But any attempt on trying to connect using the virtual IP (192.168.1.200) will fail miserably. Funny thing is, after a while it will return back to normal. Anyone had similar experience with this type of problem while implementing NLB before? We are doing this in a virtual environment.

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• Beeping Hard Disk - Seagate 250GB Momentus 5400.6

  - by Pez Cuckow

  I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to a recording below: http://www.pezcuckow.com/files/BeepingHardDisk.m4a This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

  Read the article

• IIS 7.5 stops serving requests for no apparent reason

  - by Steffen

  We're running a site on 4 virtual Win 2008 R2 64 bit servers. This is the only site on the IIS, and we use Windows Network Load Balancing to share the load between our 4 virtual servers. We've used these virtual servers for approximately a week, and we're starting to see some issues. For no apparent reason the IIS stops serving pages, and doesn't even respond with an error. So upon requesting a page from the server, the browser just waits infinitely (or until it decides to give up clientside) Sometimes an iisreset fixes the issue, other times we have to reboot the entire virtual server. There are no traces in the eventlog of why this happens, and there's no traces in our applications exception log neither. Furthermore this happens even when there's a very small load on the server, so it doesn't seem to be because it's flooded with requests. So frankly I'm at a loss here - I have no idea where to start debugging this issue :-( I'm quite certain we never had these issues on our physical servers, however they were running Win 2003 32bit, so there are quite a few differences between them and the virtual ones. (Which obviously makes it difficult to tell what exactly causes this)

  Read the article

• winbind failing after a semi-random amount of time

  - by The Digital Ninja

  I have winbind set up to authenticate to our AD for samba shares. This is the third such server, and the only one having any issues. It seems after a random amount of time samba shares will just stop working. Winbind processes seem to be running but restarting them seems to fix the issue for a while. Looking at the logs have been kind of hit an miss and I don't know exactly when it fails. One interesting thing is that it seems to be pulling from another domain controller that it shoudlnt. I censored out the domain name in this example. But isnt there some way to block authentication to a domain? I'm not sure if this is a symptom or a cause of the issue. [2010/10/18 08:02:10, 0] winbindd/winbindd_cache.c:initialize_winbindd_cache(2577) initialize_winbindd_cache: clearing cache and re-creating with version number 1 [2010/10/18 09:15:54, 1] libsmb/clikrb5.c:ads_krb5_mk_req(686) ads_krb5_mk_req: krb5_get_credentials failed for [email protected] (Cannot find KDC for requested realm) [2010/10/18 09:15:54, 1] libsmb/cliconnect.c:cli_session_setup_kerberos(624) cli_session_setup_kerberos: spnego_gen_negTokenTarg failed: Cannot find KDC for requested realm [2010/10/18 09:15:54, 0] lib/util_sock.c:write_data(1139) write_data: write failure. Error = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:write_socket(242) write_socket: Error writing 108 bytes to socket 18: ERRNO = Connection reset by peer [2010/10/18 09:15:54, 0] libsmb/clientgen.c:cli_send_smb(290) Error writing 108 bytes to client. -1 (Connection reset by peer)

  Read the article

• How To Find Reasons of Why Site Goes Online/Offline

  - by HollerTrain

  Seems today a website I manage has been going online and offline throughout the entire day. I have no idea what is causing the issue so I am seeking guidance on where to start. It is a Wordpress based site. So here is what I DO know: I use a program that pings the server every minute and when the server is not responding me it emails me, so I can know exactly when the site is online and offline. The site between 8pm to 12pm 12.28, and around the 1a hour early morning 12.29 (New York City timezone, and all times below are in same timezone). At the time of the ups/downs I see a lot of strain on the memory usage. Look at the load average when the site is going online/offline (http://screencast.com/t/BRlfXkqrbJII). Then I ran this command to restart http (http://screencast.com/t/usVtYWZ2Qi) and the memory usage then goes down to this (http://screencast.com/t/VdTIy3bgZiQB). An hour after I restarted http, the site then went offline/online so restarting the http didn't do much help. When the site is going offline/online, I ran the top command and get this (http://screencast.com/t/zEwr7YQj3). Here is a top command when the site is at it's lowest (http://screencast.com/t/eaMfha9lbT - so this would be dubbged "normal"). Here is a bandwidth report (http://screencast.com/t/AS0h2CH1Gypq). The traffic doesn't seem to be that much (http://screencast.com/t/s7hrWNNic1K), but looking at my times the site is going up/down this may be one of the reasons? I have the dvp Nitro package at Media Temple (http://mediatemple.net/webhosting/nitro/). So at this point I would request some help in trying to figure out what the cause of this is, and how I can go about pinpointing this issue. ANY HELP is greatly appreciated.

  Read the article

• Can't connect to MySQL on CentOS 5 Error 13 - Permission Denied

  - by abszero

  Ok, I have an install of CentOS 5 running as a GuestOS in VirtualBox. The network card for the Cent box is bridged with that of my host OS so that the boxes can see each other. Cent has an IP of 192.168.1.108 and my Host box has an IP of .104. Everything, with regard to networking, seems to be working properly as I can access the Drupal install that is on the Cent box from a web browser on my host box by navigating to http://192.168.1.108 however when I try to configure the database for Drupal through the Drupal install interface I am getting the Can't connect to MySQL error. First I thought this might of been a Firewall issue so I stopped iptables but that had no effect. I thought maybe the user I had setup did not have access to the server so I tried root and that did not work. Searching on the net said that I needed to provide a bind-address parameter to my.cnf so I did that with no change. (As a side note the length of my my.cnf file was MUCH shorter than the ones presented online. In fact under mysqld all I have are datadir, socket, user, and bind-address. Is this normal or should the file be more verbose?) After a few hours of messing with permissions and such I tried using 'localhost' as the value for the database server, from my HOST OS, and the Drupal install kicked off without a problem. So while my issue is resolved I am curious as to why 'localhost' works and why 192.168.1.108 did not? Is there something i need to do to specifically access the MySQL box via the aforementioned IP? Thanks.

  Read the article

• Why can't I update Adobe Creative Suite?

  - by Lynda

  I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error: The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked. I am not sure what else to try or do at this point. Are there any other recommendations to solve this issue? Notes: I am running Windows 8 Pro using the Creative Cloud Version of CS6. I check for updates by choosing Help Updates from within any Adobe Application This issue was not present in Windows 7 before I upgraded to Windows 8 I originally posted this question on the Adobe Forums and received no help there.

  Read the article

• Would an invalid certificate cause an 0x8004010F sync error?

  - by hydroparadise

  We just migrated from Exchange 2003 to 2007 which was a combo primary AD/DNS server and it has not gone smoothly. We are now down to getting a new certificate (a bureaucratic process thats out of my hands) and users getting the 0x8004010F sync issue. We are only using Outlook 2007 as our email client and the sync error appears exactly as so: 9:21:44 Synchronizer Version 12.0.6562 9:21:44 Synchronizing Mailbox '<User>' 9:21:44 Done 9:21:44 Microsoft Exchange offline address book 9:21:44 0X8004010F Now, I have read a number of technet articles on this issue anywhere from adding an A record in the DNS for autodiscover.domain.com to syncing the old OAD to the new OAD. In otherwords, theres lots of thing to try, but trial and error at this point might be hazardous to ther server's health and I am trying to narrow down the list of things to try. What has me thinking that the sync error could be related to the certificate is an event error message that says the following: Microsoft Exchange could not find a certificate that contains the domain name mail.ccufl.org in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Internet Mail with a FQDN parameter of mail.ccufl.org. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. I am not fully clear on how the Exchange Transport Service is related to Syncronization, but my hunch is that it probably not related to there not being a valid certificate. So to recap, would an invalid certificate cause an 0x8004010F sync error?

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• Which is more secure: Tomcat standalone or Tomcat behind Apache?

  - by NoozNooz42

  This question is not about performance, nor about load-balancing, etc. Which would be more secure: running Tomcat in standalone mode or running Tomcat behind apache? The thing is, Tomcat is written in Java and hence it is pretty much immune to buffer overrun/overflow (unless a buffer overrun in a C-written lib used by Tomcat can be triggered, but they're rare [the last I remember was in zlib, many many moons ago] and one heck of a hack to actually exploit), which gets rid of a lot of potential exploits. This page: http://wiki.apache.org/tomcat/FAQ/Security has this to say: There have been no public cases of damage done to a company, organization, or individual due to a Tomcat security issue... there have been only theoretical vulnerabilities found. All of those were addressed even though there were no documented cases of actual exploitation of these vulnerabilities. This, combined with the fact that buffer overrun/overflow are pretty much non-existent in Java, makes me believe that Tomcat in standalone mode is pretty secure. In addition to that, I can install both Java and Tomcat on Linux without needing to be root. The only moment I need to be root is to set up a transparent port 8080 to port 80 forwarding (and 8443 to 443). Two iptables line as root, that's all root is needed for. (I don't know for Apache). Apache is much more used than Tomcat and definitely does not have a security track record as good as Tomcat. What would make Tomcat + Apache more secure? What would make Tomcat + Apache less secure? In short: which is more secure, Tomcat standalone or Tomcat with Apache? (remembering that performance aren't an issue here)

  Read the article

• dd clone hard drive: Input/Output Error though "chkdsk" says OK

  - by unknown (google)

  Hi, I've used dd to clone hard drives before using 'dd' and a live cd, but have run into a problem. The issue: dd fails with an "Input/Output Error" on /dev/sda3 , even though windows "check disk" (chkdsk) says it's ok. Context: Trying to replace my laptop hard drive w/ a faster one of the same size Laptop has NTFS on a 320gb hard drive Booting into knoppix Knoppix recognizes 'original' drive (/dev/sda) I am using a usb connection for ‘new' drive (irrelevant, but just an fyi) Knoppix recognizes the usb drive as /dev/sdb Using dd, as follows: dd if=/dev/sda of=/dev/sdb "dd" gives the I/O error above at 82Gb (out of 320Gb) I then tried checking each partition as follows and found it failed on /dev/sda3: dd if=/dev/sda1 of=/dev/null dd if=/dev/sda2 of=/dev/null dd if=/dev/sda3 of=/dev/null I have ran windows xp chkdsk on the offending drive in both "find only" and "find and fix" mode and it reports no errors Question How can I find and fix the error on my original hard drive partition (i.e. /dev/sda3) so that dd reads it successfully?

  Read the article

• Ubuntu 9.10 x64 has no sound, while Ubuntu 9.04 32 bit does.

  - by Macha

  I installed Ubuntu 9.10 x64 recently. Up until now I've been on 32 bit Ubuntu. For the first time since installing it, I went and tried to play a Youtube video. There was no sound. So a quick test to the system reveals that nothing will play sound (And I've tried turning the volume too full, as some have said output is quite quiet, but there is no sound at all). Further research shows that in sound preferences, the only output device listed was Dummy Output. Why would it work in 9.04 x86 and not 9.10 x64? While booting up, and occasionally with the sound preferences dialog open, I get a loud click (even though it isn't recognising my sound card). It's a Dell Studio 17 laptop. I'm not sure what the exact model of sound card is.

  Read the article

• Laptop harddisk produces clicking sound

  - by Alfred James

  This happens when I am booting up into windows, shutdown or things in which I access the harddrive excessively. It doesn't happen all the time. I have checked it with "Crystal disk Info" and it displays no problem, and shows HDD to perfectly fine. Should I be worried about my HDD? I have Hitachi HDD in laptop. Some times my harddrive temps reach upto 43C while watching movies or playing games. What are the normal temps, which are safe for HDD to operate and increase the lifetime of HDD. Thanks

  Read the article

• Testing realistic loads for new versions of existing web app

  - by David Cournapeau

  Assuming I have a relatively complex web application, I am interested in testing performances of a new version using a traffic as realistic as possible. Traffic is relatively complex (session-based, lots of internal logic which depends on incoming requests). The webapp depends on many servers (databases, frontends, etc...). I can think of two basic directions: Recording every incoming request with its timestamp in production in a centralized manner and replaying it from N clients to reproduce a load as close as possible as the original. Issue: because we have many servers, getting the centralized log is not trivial. having a system duplicating requests to a staging area so that I could "plug" a dev version of my webapp to it at anytime without affecting the production. Issue: I have not found much information about it expect this, which suggests to me that may not be the best solution. OTOH, it is realistic by definition. What is the standard way of doing this kind of testing ? I did not find much information about load testing with complex, realistic traffic.

  Read the article

• PC doesn't boot PC-BSD from USB

  - by turlando

  I've got a problem with a friend's PC: I'm installing a FreeBSD server and to make easier the installation for my friend I'm using the PC-BSD DVD. Surprise! The CD reader doesn't read DVDs, so I'm using a USB stick to perform the install. The PC seems supporting USB boot because I can choose it in the boot sequence, but the PC-BSD installation doesn't start, booting the OS installed in the primary HD. I have not physic access to the PC and I can't have at the moment more informations. What do you think about? Thanks and sorry for my terrible English. Tancredi Orlando.

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• PhpMyAdmin import/export - strange character encoding issues.

  - by John Hunt

  Hello, I'm migrating a site to a new host, and there are a couple of databases on there. There's no SSH access so I'm stuck with phpmyadmin. The issue is that certain characters (namely just whitespace) seems to being corrupt on the new site (same html, and apache doesn't seem to be messing with any encodings - you can see the strange characters have changed when I use less on my linux machine after downloading a table dump from both servers.) The issue isn't as bad if I import into the new database as utf-8 - whitespace characters only have one funny A type symbol instead of two. I've been trying various combinations of character encoding etc to no avail. Exporting from: phpMyAdmin 2.6.2 MySQL 4.1.20 MySQL connection collation: utf8_general_ci MySQL charset: UTF-8 Unicode (utf8) Collation on tables and their fields is: latin1_swedish_ci Importing to: phpMyAdmin - 2.11.9.2 MySQL client version: 5.0.45 MySQL charset: UTF-8 Unicode (utf8) MySQL connection collation: utf8_general_ci The import sql has this kind of thing in it: ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=192 ; I get the impression this is actually a bug or something with mysqldump as nothing seems to work.. does anyone have any insight into this? Cheers, John.

  Read the article

• What is the best way to recover from a mysql replication fail?

  - by Itai Ganot

  Today, the replication between our master mysql db server and the two replication servers dropped. I have a procedure here which was written a long time ago and i'm not sure it's the fastest method to recover for this issue. I'd like to share with you the procedure and I'd appreciate if you could give your thoughts about it and maybe even tell me how it can be done quicker. At the master: RESET MASTER; FLUSH TABLES WITH READ LOCK; SHOW MASTER STATUS; And copy the values of the result of the last command somewhere. Wihtout closing the connection to the client (because it would release the read lock) issue the command to get a dump of the master: mysqldump mysq Now you can release the lock, even if the dump hasn't end. To do it perform the following command in the mysql client: UNLOCK TABLES; Now copy the dump file to the slave using scp or your preferred tool. At the slave: Open a connection to mysql and type: STOP SLAVE; Load master's data dump with this console command: mysql -uroot -p < mysqldump.sql Sync slave and master logs: RESET SLAVE; CHANGE MASTER TO MASTER_LOG_FILE='mysql-bin.000001', MASTER_LOG_POS=98; Where the values of the above fields are the ones you copied before. Finally type START SLAVE; And to check that everything is working again, if you type SHOW SLAVE STATUS; you should see: Slave_IO_Running: Yes Slave_SQL_Running: Yes That's it! At the moment i'm in the stage of copying the db from the master to the other two replication servers and it takes more than 6 hours to that point, isn't it too slow? The servers are connected through a 1gb switch.

  Read the article

• Can't connect remotely to Windows Server 2008 R2

  - by JohnyD

  I have a new Dell R710 server running Windows Server 2008 R2. I one of it's 4 nic's set up and the rest are not being used. I have successfully given it an ip address, network mask, and dns servers. I can ping and resolve this machine from anywhere else in the network. However, when I try to connect to it via RDP it does several things: 1) it might just outright refuse me with the message, "This computer can't connect to the remote computer. Try connecting again." 2) it might connect me and let me chose the account I would like to log on as... but when you select an account then you receive the same message as in #1 3) it might actually allow you to connect but only for about 1 minute and then you receive the same message and it closes your session. I have configured the firewall service to allow for RDP over the domain network connection. This didn't have any noticible effect. I have now disabled the firewall for all 3 networks and have even stopped the Windows Firewall service. I am still having the same issue. I am new to Server 2008 R2 and things are very different. Please give me any advice you can on how to resolve this issue and/or any other gotchas that are sure to come my way. The 2003 - 2008 learning curve seems steep. Thanks

  Read the article

• How do I boot a virtual machine image from my network?

  - by Haabda

  I have many machines which require the same configurations. My goal is to boot them all from the network and load a virtual machine. It would be wonderful to have one image for all of our customer service machines. That way, I could load the virtual image, perform updates, and know the next time they boot up they will have all the changes. Ideally, the machines would store the image locally and only download a new image if there has been a change. With all the information out there on "desktop virtualization", "PXE booting", and "virtual machines", I feel lost. I have been reading for hours and feel like I have only just scratched the surface. I would like to do this using open source or free software. Any suggestions?

  Read the article

• Autodiscover service seems to reply with User Principal Name instead of email address

  - by Jeff McJunkin

  After this latest round of Windows updates (on 1/11/11, in fact) my Exchange 2007 server of course rebooted. This may have had the side effect of making any changes I'd inadvertently made take effect. Since then, the Autodiscover service in Exchange 2007 from Outlook 2007 seems to reply with the User Principal Name ([email protected] instead of [email protected]). I'm specifically seeing this from within the "Test Email AutoConfiguration" tool in Outlook (the UPN appears in the first text box labeled "E-mail") and when creating a new profile in Outlook. If I disregard the UPN and instead fill in my email address, Autodiscover works as expected and I can connect without issue. I've confirmed using ADSI Edit that the SMTP email address is properly set for my users. I even went a bit crazy and set the UPN to the email address using ADSI Edit. I've re-installed the Client Access role on the server in question. Exchange server is Server 2008, 64-bit of course. Clients are mostly XP 32-bit, though the issue happens from a Windows 7 machine as well.

  Read the article

• Xenserver boot error

  - by Adrian

  I'm trying to get Xenserver 5.5 running on a spare computer here, hardware specs: Intel Q6600, 4GB Ram, and Gigabyte GA-P35-DS3R motherboard Xenserver itself installs fine onto a 150GB sata hdd, however it fails to boot whatsoever, giving this garbled mess: http://img697.imageshack.us/img697/9918/biosi.jpg it's not frozen because if I press enter it just prints a different garble and it also says "could not find kernel image". The strangest thing is if I put that hdd in my desktop and assign it to a VMWare desktop vm (under the ESX profile no less) it boots perfectly... leading me to believe there are no problems with the install or the hdd itself. From what I can tell the error seems to be occuring completely seperately to Xenserver, in the bootloader extlinux?. If there was a motherboard compatibility issue I would think it would also have manifested during installation, and the fact the problem seems to be with the booting into Xen makes me doubt this. Any ideas guys? (I'm using Xen because it can do PCI passthrough without VT-d.)

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• Cannot properly read files on the local server

  - by Andrew Bestic

  I'm running a RedHat 6.2 Amazon EC2 instance using stock Apache and IUS PHP53u+MySQL (+mbstring, +mysqli, +mcrypt), and phpMyAdmin from git. All configuration is near-vanilla, assuming the described installation procedure. I've been trying to import SQL files into the database using phpMyAdmin to read them from a directory on my server. phpMyAdmin lists the files fine in the drop down, but returns a "File could not be read" error when actually trying to import. Furthermore, when trying to execute file_get_contents(); on the file, it also returns a "failed to open stream: Permission denied" error. In fact, when my brother was attempting to import the SQL files using MySQL "SOURCE" as an authenticated MySQL user with ALL PRIVILEGES, he was getting an error reading the file. It seems that we are unable to read/import these files with ANY method other than root under SSH (although I can't say I've tried every possible method). I have never had this issue under regular CentOS (5, 6, 6.2) installations with the same LAMP stack configuration. Some things I've tried after searching Google and StackExchange: CHMOD 0777 both directory and files, CHOWN root, apache (only two users I can think of that PHP would use), Importing SQL files with total size under both upload_max_filesize and post_max_size, PHP open_basedir commented out, or = "/var/www" (my sites are using Apache VirtualHosts within that directory, and all the SQL files are deep within that directory), PHP safe mode is OFF (it was never ON) At the moment I have solved this issue with the smaller files by using the FILE UPLOAD method directly to phpMyAdmin, but this will not be suitable for uploading my 200+ MiB SQL files as I don't have a stable Internet connection. Any light you could shed on this situation would be greatly appreciated. I'm fair with Linux, and for the things that do stump me, Google usually has an answer. Not this time, though!

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >