Search Results

Search found 10388 results on 416 pages for 'hardware selection'.

Page 283/416 | < Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >

• SATA controller installed but not working? (No drives show up/Don't see card's BIOS)

  - by johnnycakes

  Hi, I have an old Promise FastTrak S150 TX4 SATA controller card. I put it in an old machine running Windows Server 2003. I booted the machine. The new hardware was detected. I installed the drivers. So now in Device Manager under "SCSI and RAID Controllers" I see "Win Server 2003 Promise FastTrak S150 TX4 Controller" and "Win Server 2003 Promise RAID Console SCSI Processor Device" I previously had the card in a machine that is now dead. When I booted that machine, during the boot process I would see the card info displayed and the drives that were attached. Boot would finish and my drives would be available. When I boot this new machine I never see that screen/text. No hard drives are available/visible. What am I missing? Thanks.

  Read the article

• Transfer Raid Drives to External Enclosure

  - by dubbeat

  I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

  Read the article

• Is HDCP working for ATI/AMD cards on windows 8?

  - by Joel Barsotti

  I have an AMD 6950 and am running windows 8 RTM. I've tried the Catalyst 12.8 drivers and the 12.9 beta drivers. With either drive HDCP seems to be non operational. I've got two dell monitors, one a u2410 and the other a 2408wfp. Both were previously identified as supporting HDCP in windows 7 with the same hardware. I've tested the monitors individual on both DVI and display port, and neither one works. I'm using cyberlinks BD-Advisor to test. My end goal is getting the DirecTv2PC app working again, which is by cyberlink for DirecTV, and requires HDCP. Currently it shuts off when you start playing a recording.

  Read the article

• Client side certificates in client browsers with unix server for management

  - by user146253

  We are currently running Unix dedicated servers for everything (Web cluster, database, FTP, batch, ...) except for a Microsoft Active Directory Certificate Services. The sole purpose of this Windows box is to provide client side certificates to our clients browsers. All our clients are required to install a client side certificate on order for them to be able to access our website. Is there an alternative in the Unix space? The purpose is to make sure only the approved hardware of an approved client can access our website. I'm open for any solution that provides me with this level of security. We are however talking about thousands of certified computers just so you can factor that in in a proposed solution. Optionally we would also like to be able to revoke access. With Regards.

  Read the article

• Why such a dramatic difference in wireless router max. simultaneous connections?

  - by Jez

  Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

  Read the article

• How would you measure the amount of atmospheric dust in a server room?

  - by Tom O'Connor

  We've been advised by our tape library vendor that one of the reasons we might be seeing lots of errors is if our server room is particularly dusty. It doesn't look dusty, but that's not to say it's not there. We've got an environment sensor cluster which measures Temperature, Airflow and Relative Humidity. I should probably point out that the low-hanging fruit solution I came up with is to use Sellotape (scotch tape) in a loop, one side stuck to the server cabinet, the other side free-hanging. I've also put a couple of other tape loops by the exit and intake fans of the hardware (not blocking airflow, naturally). How can we (electronically, ideally) measure dust levels?

  Read the article

• Why some recovery tools are still able to find deleted files after I purge Recycle Bin, defrag the disk and zero-fill free space?

  - by Ivan

  As far as I understand, when I delete (without using Recycle Bin) a file, its record is removed from the file system table of contents (FAT/MFT/etc...) but the values of the disk sectors which were occupied by the file remain intact until these sectors are reused to write something else. When I use some sort of erased files recovery tool, it reads those sectors directly and tries to build up the original file. In this case, what I can't understand is why recovery tools are still able to find deleted files (with reduced chance of rebuilding them though) after I defragment the drive and overwrite all the free space with zeros. Can you explain this? I thought zero-overwritten deleted files can be only found by means of some special forensic lab magnetic scan hardware and those complex wiping algorithms (overwriting free space multiple times with random and non-random patterns) only make sense to prevent such a physical scan to succeed, but practically it seems that plain zero-fill is not enough to wipe all the tracks of deleted files. How can this be?

  Read the article

• Still no external sound after installing ubuntu 10.04

  - by Walter

  As suggested I upgraded. Same as before except now not even the speaker control in the application bar. Please help. Background: I have Ubuntu 9.10. Headphones appear to work fine. External speakers - nothing. There are so many sound preferences I have no idea what or which combination. Went to terminal and ran alsamixer which seems to recognize my sound card, though the driver is not listed in System Administration Hardware Drivers; the only driver listed is my graphics card. Setup: I have a Dell 8250. Speakers are plugged into the SB live card. Woofer and 2 speakers using transformer.

  Read the article

• monitoring load on AWS EC2

  - by hortitude

  I'm interesting in monitoring our EC2 instances to ensure we scale up when necessary. Right now we are monitoring idle CPU time as our metric. We aren't measuring disk IO as we are not a very disk intensive application. When running on our own hardware in a datacenter I also usually monitor "load" from the top command. My question is: Does it make sense to monitor "load" on a shared env such as EC2? If so, how do you interpret the results?

  Read the article

• How can I combine non-identical disks efficiently?

  - by Odys

  There are some not-identical disk of various capacities that I want to combine (somehow). Since there are no duplicate models, I can't use raid between none of them. Is there a way to use them efficiently while being safe? What I have in mind is a software that will use them as if it were Raid-5 or something. I really don't care about max speed. I want in the end to have as less logical drives as possible. Also, I don't mind spending some money on hardware, if needed.

  Read the article

• Windows Proxy Server advice

  - by Scott

  I have a webserver that currently has about 10 IP addresses. I have various clients that require a proxy server to route their internal traffic through. The load is not that great, so I'd like to have this ONE server act as a proxy server for 10 different clients, each client having their own unique IP on the server. The hardware is already setup, but I'm wondering what software solutions you guys recommend? I've looked at WinGate, Squid-Proxy, etc...but am pretty green with this. Maybe there's even a way to have Windows do this natively? I'm running Windows Server 2008, 32 bit.

  Read the article

• Windows DFS Limitations

  - by Phil

  So far I have seen an article on performance and scalability mainly focusing on how long it takes to add new links. But is there any information about limitations regarding number of files, number of folders, total size, etc? Right now I have a single file server with millions of JPGs (approx 45 TB worth) that are shared on the network through several standard file shares. I plan to create a DFS namespace and replicate all these images to another server for high availability purposes. Will I encounter extra problems with DFS that I'm otherwise not experiencing with plain-jane file shares? Is there a more recommended way to replicate these millions of files and make them available on the network? EDIT: I would experiment on my own and write a blog post about it, but I don't have the hardware for the second server yet. I'd like to collect information before buying 45 TB of hard drive space...

  Read the article

• Looking at desktop virtualization, but some users need 3D support. Is HP Remote Graphics a viable solution?

  - by Ryan Thompson

  My company is looking at desktop virtualization, and are planning to move all of the desktop compute resources into the server room or data center, and provide users with thin clients for access. In most cases, a simple VNC or Remote Desktop solution is adequate, but some users are running visualizations that require 3D capability--something that VNC and Remote Desktop cannot support. Rather than making an exception and providing desktop machines for these users, complicating out rollout and future operations, we are considering adding servers with GPUs, and using HP's Remote Graphics to provide access from the thin client. The demo version appears to work acceptably, but there is a bit of a learning curve, it's not clear how well it would work for multiple simultaneous sessions, and it's not clear if it would be a good solution to apply to non-3D sessions. If possible, as with the hardware, we want to deploy a single software solution instead of a mishmash. If anyone has had experience managing a large installation of HP Remote Graphics, I would appreciate any feedback you can provide.

  Read the article

• xinet vs iptables for port forwarding performance

  - by jamie.mccrindle

  I have a requirement to run a Java based web server on port 80. The options are: Web proxy (apache, nginx etc.) xinet iptables setuid The baseline would be running the app using setuid but I'd prefer not to for security reasons. Apache is too slow and nginx doesn't support keep-alives so new connections are made for every proxied request. xinet is easy to set up but creates a new process for every request which I've seen cause problems in a high performance environment. The last option is port forwarding with iptables but I have no experience of how fast it is. Of course, the ideal solution would be to do this on a dedicated hardware firewall / load balancer but that's not an option at present.

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• Ideal laptop specs for a Computer Science Masters student?

  - by Ayush

  I have a HP pavillion core 2 duo 2 GHz and 4 GB RAM, and it is painful to use this machine for any kind of coding. Eclipse (especially Juno) literally takes 5 minutes to load. And even after that, everything is lagy. Apart from school stuff, I also use my computer as a television. I watch Hulu, Netflix, YouTube etc in 720p, and this laptop gets hot as hell and the fans are loud enough to wake somebody up from deep sleep. I DON'T use my laptop for Gaming or Video/Photo Editing. I'm looking to buy a new laptop (in which most widely used IDEs would work smoothly and playing hi-def videos wouldn't be too much for the machine to handle) any suggestions (on hardware specs) would be greatly appreciated. Thanks

  Read the article

• How do I swap audio output of the left and right speakers?

  - by Manga Lee

  I have two speakers stereo speakers but when I use the sound control panel applet to test my audio configuration I get sound in the right speaker when the user interface indicates the right speaker and vice versa. Is there a way to swap the audio output from left to right and right to left? UPDATE: The reason for this question is that I've recently rearranged my workspace and because of physical constraints the left speaker has to go on the right side and vice versa. I could of course solve this problem with a hardware solution but I'd rather use a software solution if one is available.

  Read the article

• Need help upgrading MacBookPro3,1 RAM to 4GB.

  - by Fantomas

  My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

  Read the article

• Is there a free tool/package that can monitor web traffic and display URLS accessed? [closed]

  - by Anthony

  I couldn't find a similar question but then maybe I am searching for the wrong terms. A few years ago I used a router like device, I'm pretty sure it was a SonicWall, that did this on a clients site. Basically all traffic would be routed through this device and it allowed the manager/administrator to inspect web usage of the workers, determine how often certain resources were accessed and block them if necessary (much like content filter). It showed reports based on domain name reached etc. Facebbok.com, Bebo.com and so on. It also displayed the usual IP traffic information etc. it was a UTM also. I have tried Endian firewall, with it's NTOP install, but I don't think that will show URLs browsed. Maybe I just haven't found it in NTOP yet? I need this to troubleshoot connection and traffic issue at my home, with about twenty devices/users so didn't want to buy a dedicated solution and have spare hardware to use a community product.

  Read the article

• PC cannot see Clonezilla server when using PXE Boot

  - by r2b2

  Hi I have about 15 workstations, all have the same hardware specs so I figured clonezilla is perfect for cloning them. So I followed everything this guide says :cloning groups of school computers That guide above makes it all look easy but when I tried setting up Clonezilla Server Edition on my laptop (Kubuntu 10.10) and configured the master computer for PXE boot, the master computer could not see the Clonezilla server. It just shows 'DHCP...' which seems it trying to grab an IP address but to no avail. Please help. Thanks!

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• Windows 8 will only recognize the Blu-Ray drive, if the Windows 8 disc is present at boot time

  - by aceinthehole

  If I have the install disc in the Blu-Ray ROM drive at boot time and subsequently remove the disc and replace it with Blu-Ray media, everything functions as I’d expect. However, if I have no media present, or another disc in the drive at boot time, then Windows 8 does not seem to recognize that the Blu-Ray player is even present in the computer. It is not present in My Computer, the Device Manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expected, but what is it about having the Windows 8 install disc in the drive or not that would cause this kind of behavior?

  Read the article

• Duplicate name exists solution

  - by user978733

  I have about 70 pc's with exactly same hardware. I decided to automate turning on and off. I took 1 PC. Here is what I've done: Changed bios configuration so that now pc's waking when I turn on AC switch Installed Windows XP and configured so that I can turn off remotelly, changed workgroup name to "WG1", and pc name to "ExamPC" Then created acronis backup image of this pc I installed this image in several PC's and tried to test All worked well till windows opened. The problem is, all tested PC's started Windows nearly at the same time, and all of them popped up error Duplicate name exist. I can't figure out any solution. Any suggestions?

  Read the article

• Make laptop boot to external monitor

  - by Ozzy

  Hi all. Heres my setup: Dell 1737 2x Dell U2311H The laptop lid is always closed and is wall mounted behind the monitors. Every time i boot the laptop, i have to open the lid a little until it goes to the win 7 logon screen. Once there, i close the lid and both monitors get detected and the laptop screen switches off. As the laptop is wall mounted how ever, its really tedious to keep opening and closing the lid. Is there any way i can make it default to the external monitors permanently? Any suggestions are welcome, even hardware mods. Im willing to rip apart the laptop to install a switch or something if needs be lol

  Read the article

• Cannot connect to IIS 7 from localhost

  - by Wout

  I cannot connect to the local IIS 7 using "http://localhost" in IE. "http://127.0.0.1" doesn't work either. The strange thing is that if I add a binding on e.g. port 81, then I can reach "http://localhost:81". Also turning off the firewall on the local machine doesn't help. The site is reachable from the internet. The local requests don't seem to hit IIS (no entries in the IIS log files). IIS is hosted on Windows Server 2008 R2 from behind a hardware firewall device. Note that I'm a programmer, not a network administrator, so I'm having a hard time trouble shooting this.

  Read the article

< Previous Page | 279 280 281 282 283 284 285 286 287 288 289 290  | Next Page >