Search Results

Search found 10388 results on 416 pages for 'hardware selection'.

Page 287/416 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

  • How to use 2 or more internet connections on the same network?

    - by Rogue
    Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

    Read the article

  • how to debug BSOD irql_not_less_or_equal error

    - by Sev
    So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

    Read the article

  • Start Menu freezes when highlighting 'All Programs'

    - by gergesi
    Hey all, A friends machine is lagging for about 30 seconds when they highlight 'All Programs'. A gray box popus up where the program menu would be, but it doesnt populate for nearly 30 seconds. This seems to happen if he hasn't open the start menu for a bit.. but if he get's it working once, doing it immediatly afterwards will usually not have the same lag. Assuming computer hardware isn't an issue, any ideas what the problem may be? Sidenote: He mentioned making desktop shortcuts is taking long as well, does that give any clues?

    Read the article

  • Is it possible to re-create the Windows 8.1 install image after the upgrade

    - by rossmcm
    I have downloaded and installed the Windows 8.1 upgrade from the Windows store. The hardware was a 64-bit Toshiba P50 laptop. I need to upgrade a second P50 and wish to do so without another 3.6Gb download (I tried the instructions here but never got the chance to create the installation media, nor was I asked for a product key). I saw mention on superuser of creating USB rescue media after installation and using that to clone the upgrade onto another machine. Is this likely to be a viable option?

    Read the article

  • Iozone: sensible settings for a server with lots of RAM

    - by Frank Brenner
    I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

    Read the article

  • Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

    - by 31eee384
    I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do.

    Read the article

  • My Network adapter "D-Link DWA-547" is causing windows 7 to freeze up.

    - by Anders
    Any audio playing, and sometimes the program i am using is constantly stuttering and freezing up. I have narrowed the offending hardware down to my: D-Link DWA-547 RangeBooster N650 Desktop Adapter If i disable it in the device manager everything runs fine and smooth. The card works, and gives me super fast internet. But the rest of the system hangs. I have tried installing the card with the drivers from the cd that came with it, i also tried the lates beta drivers from the d-link webpage, but the problem persists. What do i do? I am running windows 7 x64 on a asus p5b motherboard with 2 intel processors.

    Read the article

  • Install Windows with QEMU

    - by Radium
    I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

    Read the article

  • Taking over and Moving a PHP site

    - by KCavon
    I have a internal use PHP site at my new position. It only runs a few days a year off site so we keep it on laptops. The hardware it has been on, a 8 year IBM Thinkpad running Fedora, is dying. I have new Lenovo Thinkpad's running latest and greatest Ubuntu. I have copied the contents of var to a shared drive, renamed the old www folder in var on the new machine and copied over the old www folder. I can get to the login page and into the site, but when I look something up it returns Cannot Open. I know I cannot get to the MySQL in the new machine because users and passwords dont match. The version of the PHP from the old machine is before the setup script was included. I know very little about PHP. I am looking for input on the proper way to link the old PHP files to my mysql instance. Any help, much appreciated.

    Read the article

  • Please define: "Maximum Memory Supported - 10GB, Service Upgradable Only"

    - by Droogans
    I am assuming this means that the RAM modules can only be inserted/removed from some place very inconvenient? Maybe under the keyboard? Or does this mean something more strict, as in the only way to get an upgraded module in the laptop is via some special toolset, or verified through the hardware to allow the system to recognize the new memory? I ask because I'd want to know if I need to buy my own additional RAM, since I can't seem to find a way to get to 8GB. A Google search result turned up very little other than hits for shopping. Here is the laptop in question: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4817549&sku=T78-144301

    Read the article

  • How to achieve redundancy across data centers?

    - by BrandonBT
    I have a LAMP server with a lot of hardware redundancy built in. I am not worried about the server becoming unavailable. What I am worried about, however, are potential network issues in the data center the server is in. What I would like to have is another server in another data center for redundancy. Load balancing is less of a concern. With that said, I am relatively clueless on two points: How to have two servers in two geographically separate data centers that have exactly the same data, in terms of both files and MySQL databases. How to ensure that all traffic coming into one data center are automatically transferred to the other database in the case of a network or server failure at the first data center. Any guidance on how to accomplish the above two problems would be greatly appreciated.

    Read the article

  • Portable Display doesn't work anymore

    - by RipCord
    My USB portable monitor will not work since I installed the hard drive onto an HP laptop. I have installed all the new hardware drivers and do not have any more device issues in device manager view. My old laptop was a lenovo. The new one is an HP. The system seems to recognize devices that I connect via, usb but the portable display still does not show anything on the screen. It is probably a conflict in the registry but I'm not sure how to find it and the Power User does not have the luxury of letting me troubleshoot for hours to isolate the problem.

    Read the article

  • Can't unlock locked screen, in Ubuntu 12

    - by Camille Goudeseune
    After locking the screen (with a keystroke bound to xlock -nice 8 -mode blank), I can unlock the screen as expected, but only within a few minutes. After being locked overnight, when I hit a key (even Ctrl+Alt combos), the screen stays black with just a brief white flash across the middle of both monitors. The workaround is to ssh in from another host and restart X. Some months ago, this happened every few weeks. By now it happens almost every morning. How do I even start to diagnose this? What might I look for in log files? (The intermittency is particularly troubling.) Failing that, is there an alternative to xlock aka xlockmore? Hardware: 3-year-old HP minitower, GEForce 9800 GT, two Asus LCD monitors. Software: Ubuntu 12.04.2 LTS. Window manager awesome-wm. NVidia driver 304.88. XLock version xlockmore-5.31.

    Read the article

  • Windows 7 automatically install usb driver

    - by Dan
    I have tried to install usb driver for Samsung arndale on Windows 7. Now it has two entries in Device Manager. I can not uninstall the one with question mark. If I uninstall both of them, when I plug in the hardware, Windows 7 will automatically install both of the entries when the circuit pulg in. I don't get the chance to choose the right driver. When I try to update the wrong driver, it says found the driver but can not install it.

    Read the article

  • win2003 server problem

    - by Tavo
    I used to have a server with win2000 OS. Yesteday I updated it to win2003 server R2 service pack 2. My problem now is that in a particular moment nobody can access the server. All of the shared resource of the server are unavailable. The only solution is to restart the server although the server is running fine. I don't think that is a connection problem of the LAN, because with the win2000 this problem didn't happend. The PC is connected to the same switch and the PC have the same exact hardware.

    Read the article

  • What should a hosting company do to prepare for IPv6?

    - by Josh
    At the time of writing The IPv4 Depletion Site estimates there are 300 days remaining before all IPv4 addresses have been allocated. I've been following the depletion of IPv4 addresses for some time and realize the "crisis" has been going on for many years and IPv4 addresses have lasted longer than expected, however... As the systems administrator for a small SaaS / website hosting company, what steps should I be taking to prepare for IPv6? We run a handful of CentOS and Ubuntu Linux systems on managed hardware in a remote datacenter. All our servers have IPv6 addresses but they appear to be link local addresses. Our primary business function is website hosting on a proprietary website CMS system. One of my concerns is SSL certificates; at the moment every customer with an SSL certificate gets a dedicated IPv4 IP address. What else should I be concerned about / what action should I take to be prepared for IPv4 depletion?

    Read the article

  • BSODs after Windows 8.1 Upgrade

    - by Techrocket9
    I just upgraded my system to Windows 8.1, and I have been getting BSODs that I did not get before the 8.1 upgrade. Though I cannot conclude that running the Android Emulator with Intel's HAXM is the cause, both crashes have occurred while the emulator was running. I get CRITICAL_STRUCTURE_CORRUPTION, the same error as this guy, except I don't have the hardware/software that he has that caused his problem. Minidumps here. Output of verifier.exe /all and then a reboot and then verifier /query: http://sdrv.ms/17CPVu9 Edit: According to software.intel.com/en-us/forums/topic/475129 (can't link due to lack of rep) it is being caused by HAXM. Will close question when I find a solution.

    Read the article

  • Best Linux Distro for web services (Nginx & node.js) on laptop: Compaq 6710b?

    - by tomByrer
    I haven't used Linux in 5+ years, aside from d/l occasional system recovery CDs off DistroWatch, so I don't know the current landscape. Related postings on this forum are several years old & may not relate to my hardware (Compaq 6710b laptop, Core2Duo Centrino). Requirements: Use the Compaq 6710b laptop's WiFi out of the box enough frequently updated pre-made packages for web hosting & development (Nginx & node.js are biggest concerns, everyone has Apache & PHP, & I'm not crazy about building from source) prefer be easy enough to use, but outside help available (so a small user-base distro is only OK if the community is active & a major disto's packages are compatable) configuration easy to transfer to outside web hosts. You have actually installed/used recommended disto (don't have to be expert) TIA!

    Read the article

  • How can I re-create Microsoft Cluster Service resource groups on a different cluster?

    - by PersonalNexus
    I use Microsoft Cluster Service on a cluster of Windows Server 2003 machines containing several dozen resource groups. In the process of migrating to newer hardware, I would like move resources to the new machines on resource group at a time spread out over a few days to ease the migration and minimize risk. I was wondering of there was a smarter way to do this than manually re-creating resources on the new and then deleting them on the old cluster? The cluster has already been set up properly, the only missing is the resource groups and the resources they contain (IP, network names, services...). I have looked through the options of the cluster admin GUI and cluster.exe's commandline options, but haven't found anything like an import/export feature to copy over the configuration of a resource or entire resource group. Does something like this exist?

    Read the article

  • Does Windows 8 Need New, Specialized Drivers?

    - by Synetech
    It seems like an obvious question, but I’m having a difficult time finding out if Windows 8, with all its changes, will require new, specialized drivers. I see that a lot of manufacturers have started releasing Windows 8-specific drivers for their hardware, but what about those that are not, will Windows XP or 7 drivers work or have they changed the driver/system/security architecture again, thus requiring new drivers? The closest thing I could find to an answer was a thread in which it was mentioned that the display driver model was again updated, thus requiring new display drivers, but not much else (e.g., audio cards, printers, chipsets, etc.)

    Read the article

  • Is there a software like AutoCAD, but only 2D, not 3D?

    - by Saeed Neamati
    I love AutuCAD. It's powerful, easy to use, and fits engineering mind. It rocks when you want to draw 2D diagrams and shapes and one the cool features I like about it, is its snapping power. You draw a simple rectangle, then you can very easily create a circumscribe circle around it. However, new version of it are becoming really heavy (in size) and need high tech hardware, because of its powerful 3D capabilities, and rendering engines coming with it. I only want the 2D part of AutoCAD. Is there any software out there, which resembles AutoCAD (like having a console, where you can type L and get the line tool, or having snapping capability, etc.), but is small in size? In other words, what software can be named as AutoCAD 2D alternative?

    Read the article

  • Windows 7 x64 Hard Freezing (again)

    - by Lanissum
    Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

    Read the article

  • migrating storage to a different controller

    - by bellocarico
    Hello, I've just purcheased a couple of adaptec controller (2405/5405) for my ESXi 4.0 U1 servers. Currently ESXi and a couple of VMs are hosted on single sata boot disk connected to a nvidia on board non-RAID controller. I know that it's possible to migrate from single disk to RAID 1 with adaptec and I'm pleased with that, but I'm not sure if ESXi has already the right drivers installed/loaded for this controller. Is there any way I can check this? Is ESXi clever enough to recognize the new hardware and load the right module? Thanks

    Read the article

  • Strange Intermittent Background Sound in Windows 7

    - by NoCarrier
    Ok, this is very strange. Recently, i noticed that every 10-15 seconds, there would be this faint, annoying duh-dum sound coming out of my speakers. (hard to describe. sounds somewhat like the sound windows makes when you unplug a USB device, but not as pronounced and much quieter). I closed every app and ended as many processes as I could, but the sound persists. I look at the volume mixer and sure enough, when the sound occurs, there is a little spike in the level under "System Sounds". I haven't installed any hardware or software in the last several weeks. This started recently - completely out of the blue. Does anyone have any insight?

    Read the article

  • Running RAID on an internal storage drive

    - by Johnny W
    I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

    Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >