Search Results

Search found 7545 results on 302 pages for 'backup restore'.

Page 285/302 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

  • What is it that kills laptop batteries?

    - by Mala
    There are many superstitions on what you must never do lest your battery become worthless - and by worthless I mean hold about 16 - 24 seconds of charge. This has happened to every laptop I have ever owned, and I just got a new one, so please help me sort out fact from fiction. Here are some of the things I've heard: Do not keep your laptop fully charged. You must run it completely down every so often. Do not use your laptop plugged in to the wall. Only plug it in when it needs charge. If you will not be using your laptop for a long period of time, don't leave it at full charge. Do not leave your laptop running 24/7. The first two I know to be complete fiction: this was true of old batteries such as you might have had in an iPod in 2003, but modern batteries function better when kept at or near full charge. Devices even have circuitry to prevent you from completely depleting your battery, as this is dangerous. The third point sounds probable, and I'd be interested to know if it was true. However, it doesn't really apply to me because I'm not really the type to leave my laptop alone for a day, much less a "long period of time" The fourth seems most likely of the above, but only because of causality: I have always done this, and my batteries have always crapped out on me. I've generally treated a laptop like a desktop with a battery backup, and that I can move from one room to another if necessary. The fact that my batteries tend to last less than 30 seconds has further entrenched this behavior. Should I be trying to break this habit? Are there any other things that ruin laptop batteries? I love that I can actually use my new laptop unplugged :) I'd like to keep it that way. Update: Additional question: If the computer will be used for an extended period of time plugged in, does it make sense to remove the battery first? Update 2: I know people with laptops older than mine, who actively use their laptops as much as I do, and their batteries still hold about an hours' charge while mine holds less than 30 seconds, hence my belief that something I'm doing kills them.

    Read the article

  • UCARP: prevent the original master from taking over the VIP when it comes back after failure?

    - by quanta
    Keepalived can do this by combining the nopreempt option and the BACKUP state on the both nodes: Prevent VRRP Master from becoming Master once it has failed Prevent master to fall back to master after failure How about the UCARP? Name : ucarp Arch : x86_64 Version : 1.5.2 Release : 1.el5.rf Size : 81 k Repo : installed Summary : Common Address Redundancy Protocol (CARP) for Unix URL : http://www.ucarp.org/ License : BSD Description: UCARP allows a couple of hosts to share common virtual IP addresses in order : to provide automatic failover. It is a portable userland implementation of the : secure and patent-free Common Address Redundancy Protocol (CARP, OpenBSD's : alternative to the patents-bloated VRRP). : Strong points of the CARP protocol are: very low overhead, cryptographically : signed messages, interoperability between different operating systems and no : need for any dedicated extra network link between redundant hosts. If I don't use the --preempt option and set the --advskew to the same value, both nodes become master. /etc/sysconfig/carp/vip-010.conf # Virtual IP configuration file for UCARP # The number (from 001 to 255) in the name of the file is the identifier # $Id: vip-001.conf.example 1527 2004-07-09 15:23:54Z dude $ # Set the same password on all mamchines sharing the same virtual IP PASSWORD="pa$$w0rd" # You are required to have an IPADDR= line in the configuration file for # this interface (so no DHCP allowed) BIND_INTERFACE="eth0" # Do *NOT* use a main interface for the virtual IP, use an ethX:Y alias # with the corresponding /etc/sysconfig/network-scripts/ifcfg-ethX:Y file # already configured and ith ONBOOT=no VIP_INTERFACE="eth0:0" # If you have extra options to add, see "ucarp --help" output # (the lower the "-k <val>" the higher priority and "-P" to become master ASAP) OPTIONS="-z -k 255" /etc/sysconfig/network-scripts/ifcfg-eth0:0 DEVICE=eth0:0 ONBOOT=no BOOTPROTO= IPADDR=192.168.6.8 NETMASK=255.255.255.0 USERCTL=yes IPV6INIT=no node 1: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether c6:9b:8e:af:a7:69 brd ff:ff:ff:ff:ff:ff inet 192.168.6.192/24 brd 192.168.6.255 scope global eth0 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth0:0 inet6 fe80::c49b:8eff:feaf:a769/64 scope link valid_lft forever preferred_lft forever node 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:f7:0f:81 brd ff:ff:ff:ff:ff:ff inet 192.168.6.38/24 brd 192.168.6.255 scope global eth1 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth1:0 inet6 fe80::230:48ff:fef7:f81/64 scope link valid_lft forever preferred_lft forever

    Read the article

  • Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

    - by ThinkerIV
    I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

    Read the article

  • Impact of the L3 cache on performance - worth a dual-processor system?

    - by Dan Nissenbaum
    I will be purchasing a new high-end system, and I would like to have a better sense of whether a dual-processor Xeon system (I am looking at the new, high-end Xeon E5-2687W) might, realistically, provide a noticeable performance improvement due to the doubling of the L3 cache (20 MB per CPU). (This is in addition to the occasional added advantage due to the doubling of cores and RAM.) My usage scenario is, roughly, that I have many background applications running at any time - 3 or 4 data compression/backup applications, a low-impact web server, one or two virtual machines at any given time (usually fairly idle), and perhaps 20 utility programs that utilize a noticeable (but small) portion of the CPU cores. In total, when I am not actively using the computer, about 25% of the total CPU power is utilized in my current i7-970 6-core (12 thread) system. When I am doing routine work, the CPU utilization often exceeds 50%, and occasionally hits 75%-80%. The Xeon E5-2687W is not only a second-generation i7 (so should improve performance for that reason), but also has 8 cores (16 threads), rather than 6 cores. For this reason, I expect to run into the 75% CPU range even less frequently. Nonetheless, the ability to double the cores and the RAM is a consideration. However, in the end, I believe this decision comes down to whether the doubling of the L3 cache will provide a noticeable improvement. There are many benchmarks, and a lot of discussion, regarding CPU power. However, I find very little discussion of L3 cache utilization, and how increases in the L3 cache (such as doubling it with dual processors) affect performance. For example: If there are only two processes running, but each benefits from a large L3 cache (such as might be the case for background processes that frequently scan the file system), perhaps the overall system performance might noticeably improve with dual CPU's - even if only a single core is active on each CPU - due to each process having double the effective L3 cache. I am hoping that someone has a sense of the benefits of increasing (or doubling) the L3 cache size. Note: the CPU I am considering (the Xeon E5-2687W) has 20 MB L3 cache, so a system with dual CPU's would have 40 MB L3 cache.

    Read the article

  • What part of SMF is likely broken by a hard power down?

    - by David Mackintosh
    At one of my customer sites, the local guy shut down their local Solaris 10 x86 server, pulled the power inputs, moved it, and now it won’t start properly. It boots and then presents a prompt which lets you log in. This appears to be single user milestone (or equivalent). Digging into it, I think that SMF isn’t permitting the system to go multi-user. SMF was generating a ton of errors on autofs, after some fooling with it I got it to generate errors on inetd and nfs/client instead. This all tells me that the problem is in some SMF state file or database that needs to be fixed/deleted/recreated or something, but I don’t know what the actual issue is. By “generate errors”, I mean that every second I get a message on the console saying “Method or service exit timed out. Killing contract <#.” This makes interacting with the computer difficult. Running svcs –xv shows the service as “enabled”, in state “disabled”, reason “Start method is running”. Fooling with svcadm on the service does nothing, except confirm that the service is not in a Maintenance state. Logs in /lib/svc/log/$SERVICE just tell you that this loop has been happening once per second. Logs in /etc/svc/volatile/$SERVICE confirm that at boot the service is attempted to start, and immediately stopped, no further entries. Note that system-log isn’t starting because system-log depends on autofs so I have no syslog or dmesg. Googling all these terms ends up telling me how to debug/fix either autofs or nfs/client or inetd or rpc/gss (which was the dependency that SMF was using as an excuse to prevent nfs/client from “starting”, it was claiming that rpc/gss was “undefined” which is incorrect since this all used to work. I re-enabled it with inetadm, but inetd still won’t start properly). But I think that the problem is SMF in general, not the individual services. Doing a restore_repository to the “manifest_import” does nothing to improve, or even detectibly change, the situation. I didn’t use a boot backup because the last boot(s) were not useful. I have told the customer that since the valuable data directories are on a separate file system (which fsck’s as clean so it is intact) we could just re-install solaris 10 on the / partition. But that seems like an awfully windows-like solution to inflict on this problem. So. Any ideas what piece is broken and how I might fix it?

    Read the article

  • Monitoring tools that can take high rate and high volume?

    - by Jon Watte
    We're using Cacti with RRDTool to monitor and graph about 100,000 counters spread across about 1,000 Linux-based nodes. However, our current setup generally only gives us 5-minute graphs (with some data being minute-based); we often make changes where seeing feedback in "near real time" would be of value. I'd like approximately a week of 5- or 10-second data, a year of 1-minute data, and 5 years of 10-minute data. I have SSD disks and a dual-hexa-core server to spare. I tried setting up a Graphite/carbon/whisper server, and had about 15 nodes pipe to it, but it only has "average" for the retention function when promoting to older buckets. This is almost useless -- I'd like min, max, average, standard deviation, and perhaps "total sum" and "number of samples" or perhaps "95th percentile" available. The developer claims there's a new back-end "in beta" that allows you to write your own function, but this appears to still only do 1:1 retention (when saving older data, you really want the statistics calculated into many streams from a single input. Also, "in beta" seems a little risky for this installation. If I'm wrong about this assumption, I'd be happy to be shown my error! I've heard Zabbix recommended, but it puts data into MySQL or some other SQL database. 100,000 counters on a 5 second interval means 20,000 tps, and while I have an SSD, I don't have an 8-way RAID-6 with battery backup cache, which I think I'd need for that to work out :-) Again, if that's actually something that's not a problem, I'd be happy to be shown the error of my ways. Also, can Zabbix do the single data stream - promote with statistics thing? Finally, Munin claims to have a new 2.0 coming out "in beta" right now, and it boasts custom retention plans. However, again, it's that "in beta" part -- has anyone used that for real, and at scale? How did it perform, if so? I'm almost thinking about using a graphing front-end (such as Graphite) and rolling my own retention backend with a simple layer on top of mmap() and some stats. That wouldn't be particularly hard, and would probably perform very well, letting the kernel figure out the balance between frequency of flushing to disk and process operations. Any other suggestions I should look into? Note: it has to have shown itself able to sustain the kinds of data loads I'm suggesting above; if you can point at the specific implementation you're referencing, so much the better!

    Read the article

  • Mysql innoDB corruption after server crash

    - by Ward Loockx
    Yesterday my server died because an outage in the data center. Today it's back up, but having some problems with mysql. First of all my mysql server was not able to start. For this reason I deleted the files ib_logfile0 and ib_logfile1 in /var/lib/mysql folder (I still have the old failing files). After this my server was able to startup again. But now I see a lot of issues in the mysql log file. Sep 1 09:43:55 * mysqld: 120901 9:43:55 InnoDB: Error: page 70944 log sequence number 8 1483471899 Sep 1 09:43:55 * mysqld: InnoDB: is in the future! Current system log sequence number 5 612394935. Sep 1 09:43:55 * mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 09:43:55 * mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 09:43:55 * mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html When I check the docs on mysql.com, I found that I need to recover my database with backups. I have a backup but not sure what's the good way on importing it. Or is there a way to recover without having to re-import the database again? So if I'm correct I need to put innodb_force_recovery to 4 in mysql and delete all current data and re-import? Is there a way to do this without having downtime? I also have one slave running. This slave has the current status now: Last_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master's binary log is corrupted (you can check this by running 'mysqlbinlog' on the binary log), the slave's relay log is corrupted (you can check this by running 'mysqlbinlog' on the relay log), a network problem, or a bug in the master's or slave's MySQL code. If you want to check the master's binary log or slave's relay log, you will be able to know their names by issuing 'SHOW SLAVE STATUS' on this slave. How can I totally reset the slave after the new import on the master has happend? Hopefully we can find a solution without not to much downtime. Thanks!

    Read the article

  • Windows Media Player won't launch on Vista - how to repair or reinstall it?

    - by rpm1200
    My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

    Read the article

  • My network drive disappears from Mac OS Finder

    - by Mariusz
    I have recently bought a Netgear WNDR3800 router to use it in my home network. But just the same day I installed it, I noticed a strange behaviour of Finder and iTunes. Let me explain it further. There is a Synology DS111 NAS attached to that router and two Macs with Mac OS X Lion. One of them is connected by a cable and the second one wirelessly. Before I changed my router to the new one I mentioned above, Finder always used to display my NAS on its sidebar. So I could just click its network name to access shared folders existing on it. But after I installed WNDR3800, I can no longer access the NAS that way. It is no longer displayed. I always have to mount it manually by typing its IP address using the Finder's 'connect to server' option. The same NAS supports TimeMachine backups and has an inbuilt DLNA server. And the same situation here. I can't perform a backup because my NAS is no longer accessible in TimeMachine preferences. iTunes does not display it as well (as a multimedia server) even though it used to before I installed that router. What's important, everything works fine for a couple of minutes after I restart the router or the NAS. Or even when I change the NAS's IP address it becomes accessible again in Finder, TimeMachine and iTunes, but only for some time. Both the Mac computers I mentioned behave the same way. And all those issues have been taking place sice I installed that new router. Before I did that, everything had worked fine. My old router was Netgear WGR614v10. Would you be so kind to tell me what you think could possibly be the reason of that behaviour? What settings of the router should I look closer at? I'm not a network specialist, but is it possible that some network packets are blocked for some reason? I will be grateful for any clues you give me. Thank you.

    Read the article

  • Multiple OS's and GRUB chainloading

    - by Kent
    Hi, I want to have multiple OS installations and I have been advised that chain loading using GRUB is a good way to handle this. I have looked at tutorials on the web but I still have some questions before I can start. I want: Windows XP: 20 GB. For running some school stuff and a game which does not work through WINE. Xubuntu 9.04: 85 GB. My main OS. Another Linux distribution: 15 GB . For experimenting and trying Linux distributions out. I will: Wipe and install various distributions quite often on the 15 Use dd to make a copy of my Windows partition after installing it and getting things to work as I like. My experience is that Windows needs to be re-installed maybe once per year to not get bloated and slow. I have been told: To use GRUB chain loading. It will make it easier when kernel upgrades are made in the Linux distributions, as they modify the GRUB boot-menu. To my understanding I need to: (I might very well be mistaken) Install Windows first. Then install Xubuntu and let it write over the MBR with GRUB (I guess this is the default). Get the GRUB on the MBR start Windows XP if I want to (it's done by default), start Xubuntu using the kernel of my choice or defer execution to the boot sector of my other Linux distribution. The actual chain loading will only occur when I want to start my experimental install of Linux. I wonder: Is step 3 above correct and a good way to handle this? Is it also a good way to use chain-loading for both Xubuntu and my experimental Linux installation? How do I get a Linux distribution to install the boot loader it comes with to the boot sector of its partition and not to the MBR? If I can't get it to not touch the MBR. Then I could make a backup of the MBR using dd and then write it back after installing my experimental Linux installation. But then, how would I get the boot loader (lets say GRUB) into the boot sector of the experimental Linux installation? How would it work if said Linux installation gets a new kernel update and needs to update the GRUB menu?

    Read the article

  • Linux software Raid 10 no superblock

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

    Read the article

  • Can this USB3 behaviour be anything else than a hardware failure?

    - by Jonas Wielicki
    While my motherboard is half a year old now (ASUS M5A99X EVO), I only recently made use of the USB3 boards (after purchase of USB3 external harddrive). However, I am encountering issues. I am running linux 3.6.7-4.fc16.x86_64. Initially, the harddrive worked fine with USB3 (amazing ˜160MB/s), but I had some problems after putting after putting the harddrive to sleep manually after use (backup) with hdparm -Y. After some time, the device disappears from lsusb and i see the following in dmesg: [ 1924.091107] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command. [ 1924.091114] xhci_hcd 0000:05:00.0: Assuming host is dying, halting host. [ 1924.091147] xhci_hcd 0000:05:00.0: HC died; cleaning up [ 1924.091233] usb 11-1: USB disconnect, device number 2 [ 1924.091272] sd 6:0:0:0: Device offlined - not ready after error recovery Testing with my (USB3 capable) notebook, I could not immediately reproduce the behaivour. I put the drive to sleep with hdparm -Y and waited for like an hour, but it was still listed in lsusb and responded after a few seconds delay when I tried after the hour of waiting. After an hour, on the desktop, the device would've usually vanished. Googling for this issue, I came across hints that playing around with IOMMU settings and upgrading the BIOS might help. I upgraded the BIOS and tried both with and without IOMMU enabled, got similar results. Most disturbing is, that one of the two USB 3.0 hubs sometimes also disappears from lsusb (or does not show up after boot at all). I've also heard that there are some hardware issues with ASUS USB3 ports. Applying mechanic force to the capble doesn't push the issue to one side or the other. Also, udev seems to reenumerate all devices if I plug the HDD into the USB 3.0 port without success (I can notice from my keyboard layout being changed to the default, which I do not use normally). The drive is externally powered and the external power supply is plugged in (it also stays powered when unplugging from USB, although it will spin down then). So before I try to return the board, I wanted to find out whether this can be anything else than a failure on the motherboard?

    Read the article

  • Vista 64-bit, DISK BOOT FAILURE

    - by weka
    So I have this Acer Aspire AX3200-U3600A with Windows Vista (64-bit). Every night I turn it off and turn it back on in the morning. Around three weeks ago, I did a fresh factory reimage. Good as new. Then around two days ago, when I turned it on, I noticed it was running extremly slow. As in, it would often freeze up while I had multiple applications open when it usually never froze up. So I decided to restart my computer. Big mistake. My computer froze right after I clicked shut-down. I waited a while. Nothing. Waited some minutes. Nope. I decided to shut it down by pressing the power button. Here is where the problems begin. When I turned it back on, I saw the Windows logo and loading bar and then it loaded to black. I turned it off again forcefully by power button and then once more... then I got: AMD Data Change... Update New Data to DMI! then later the screen clears and I get: AHCI Option ROM BIOS Revision: 01.05.92 Date: 02-19-2008 Copyright (c) 2006-2008 Phoenix Technologies, LTD Port 01: Reset Port Error!! Port 02: then the screen clears again but this time, this loads from the bottom: Nvidia Boot Agent 249.0542 (copyright stuff... blah blah) PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Nvidia Boot Agent DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. So I try to go into Safe Mode. Well, first of all it doesn't load as fast. After it loads disk.sys from windows/drivers, it will wait a while (2-3 mins) THEN load. However it loads the Acer eRecovery Management Tool. I have three options: Reset computer to factory default, Restore computer from user's backup, or Exit. However, the top two options are gray and disabled where as the Exit is in blue and definitely clickable. So obviously safe mode is not there... A strong thing to note: In the beginning when all of this started, I did a Boot Windows Normal from pressing f8 and I got to my desktop! It logged me in. I could see the icons on my files. However my desktop was extremely slow as in when I clicked on the Start menu, it would wait a while, then load up the menu with JUST the gradient, no text or icons... so as you can see... it saw my HDD? Also, before anyone says, I have NO USB plugged in. My mouse and keyboard are not USB inputs, I assure you. And this came without a recovery CD AND when I went in BIOS, to change the BOOT ORDER, I did NOT see a CD-ROM option. And when I tried pressing ALT+F10 to get into Acer eRecovery Management, the top two options were disabled as well. But sometimes on start-up, I get: Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removeable storage is properly connected and then restart your computer. If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occured. Then I tried Last Known Good Configuration Settings, that gives me a BSOD. What should I do/

    Read the article

  • I am starting to think that Prevx.com isnt a legit site...but heres my long-winded question

    - by cop1152
    I apologize in advance for the long-winded post. I posted it all because I believe its informative and may be useful. Also, I posted my question at the end. Moments ago I was RDC to a file server in my home (from inside my home). I had opened Firefox and Googled for a manufacturers website. Immediately after clicking the link, Firefox abruptly closed. This seemed odd to me to so I checked the running processes and discovered d.exe, e.exe, and f.exe running. I Googled these processes on a different machine and found them belonging to a key-logger/screen-capturer/trojan called defender.exe, which according to the Prevx lives in c:\documents and settings\user\local settings\temp. (Prevx link http://www.prevx.com/filenames/147352809685142526-X1/DEFENDER32.EXE.html) Simultaneously, an obviously-spoofed Windows Firewall popup appeared on the server asking me to click ‘yes’ to update Windows Firewall. At this time I ended all rogue processes, emptied the temp folder, removed defender.exe from startup, and checked my registry and a few other locations. Before deleting Defender.exe I noted that it was created moments ago, just before Firefox crashed. I believe that I was ‘almost’ infected with this malware. I believe that it needed me to click the phony popup in order to complete infection because it wasn’t allowed to execute processes from the temp folder. After cleaning the machine, I restarted it and have been monitoring it for over an hour. I am debating on whether or not to restore the Windows partition (a separate physical drive from the data) or to just watch it for awhle. I should mention that, because of the specs on this machine, I do not run antivirus software, but I know it well and inspect it regularly. It is a very old Compaq with a 400mhz processer and 512mb of ram. I have a static IP and the server is in the DMZ running an FTP client and some HTTP server software. All files transferred to and stored on this machine are scanned for malware before transferring. Usually the machine only runs 19 processes and performs pretty well for its intended purpose. I posted the story so that you could be aware of a possible new piece of malware and how it acts, but I also have a question or two. First, over the last few months I have noticed that PREVX is listed at the top of most of my Google searches when researching malware, especially for new or obscure malware…and they always want you to purchase something. I don’t think they are one of the top AV companies, so it seems odd that they are always the top Google result. Does anyone have any experience with any of their products? Also, what sites do you rely on for malware researching? Recently, I have found it difficult to find good info because of HijackThis-logs and other deadend info cluttering up my searches. And lastly, besides antivirus, third-party firewall, etc, what settings would you use to lock down a machine to make it more secure in instances where a stubborn admin like myself refuses to run AV? Thanks.

    Read the article

  • 20GB+ worth of emails in my /home what is a better solution for that?

    - by Skinkie
    My email storage requirements are outgrowing anything reasonable with respect to local mail storage. As we speak 99% of my home partition is filled with personal mail in Thunderbirds mail dirs. Needless to say, this is just painful, badly searchable and as history has proven me that backups work, but Thunderbird is capable of loosing a lot of mail very easily. Currently I have an remote IMAPS server (Dovecot) running for my daily mail, accessible from anywhere, which from my own practice works efficiently up to about 1000 emails. Then some archive directories should be used to move mail around. I have been looking into DBMail, but I wonder if I make my case worse or better which such solution. None of the supported database employ string deduplication or string compression out of the box, so is this going to help me with 20GB+ mail? What about falling back to a plain old IMAP server? A filesystem like ZFS would support stuff like GZIP transparently, which could help. Could someone share their thoughts? The 20GB mostly consists of mailinglists, and normal mail. Not things like attachments. To add some clarifications; As we speak, my mail is not server side indexed at all - only my new mail arrives at a remote IMAP server. It is all local storage from former POP3 accounts, local mirrored Gmail and IMAP accounts. In my perspective it is not Thunderbird that sucks, its fileformat that sucks. Regarding the 1000 mails. On the road I am using Alpine and MobileMail, quite happy with both of them, but some management is required to actually manage the mail. Sieve helps a lot with that, but browing through 10.000 e-mails is not fun, especially not on a mobile client. I am quite happy with Dovecot, never had any issues with it. I just wonder if this is the way to go. Or if there are any other better solutions. What my question is: what is the best practice solution that allows 20GB+ mails and is -on demand remotely accessible, easy to backup and archive worthy. It doesn't need to be available 24x7. The final approach I took was installing a local IMAP server (Dovecot), configured it for being my archive, using the following guide: http://en.gentoo-wiki.com/wiki/Dovecot/InstallThunderbird

    Read the article

  • How to make Windows 7 use the internet connection that I specify

    - by user138957
    I have a LAN adapter and a USB wireless internet connection. When both connected windows 7 always uses the USB. I tried changing the metric values but no luck. Let me explains the steps I took. Currently automatic metric on all adapters. LAN connected. ipconfig shows that it is connected to the correct ip/dns/gateway etc. IPv4 Route table shows Metric 24 Then connected USB. ipconfig shows USB connectivity then LAN in that order. Internet is now through USB. IPv4 Route table shows Metric 4249 for LAN and USB is 41. Gateway for USB shows "on-link". netstat -rn shows USBDEVICE on top. Changed LAN metric to 5 and now the route table shows LAN as 9 (not sure why it added 4) and USB as 41. netstat shows LAN then USB. ipconfig shows LAN then USB. But still connection is through USB. How do I know? Task manager shows utilization only through USB as well as speed is showing around 1mbps rather than LANs 10mbps. How can I get win7 use LAN while USB is connected. I am just trying to use USB as a backup just in case I lose LAN connection. Please help!! I thought i will make USB metric manually to say 10. But it says I have to reconnect for it to be effective. Currently USB still shows below LAN and still has 9 and 41 in the table. Disconnected USB. Table shows LAN metric as 24 (Not sure why it got changed from 9 and setting got reverted by to automatic) Reconnected USB. Now in the setting still shows 10 and the route table shows 11 for USB and LAN shows 4249 (settings shows 4245, 4 less)) For some reason restarting USB is resetting LAN setting when reconnected. Thanks

    Read the article

  • Windows Media Player won't launch on Vista - how to repair or reinstall it?

    - by rpm1200
    My friend asked me to look at her Acer Aspire laptop with Vista Home Premium as it is no longer playing DVDs. I found that Windows Media Player would not launch. I found this thread, which contained a number of suggestions, none of which solved the problem. Here is what I tried: Tried running WMP via desktop shortcut, QuickLaunch bar or going to Program Files\Windows Media Player\wmplayer.exe. In all cases, wmplayer would launch then terminate immediately (verified through the Processes tab in Task Manager). Tried running wmplayer.exe as Administrator. The UAC dialog would come up, I'd approve, then wmplayer would launch and terminate immediately. Uninstalled all non-Microsoft media programs except RealPlayer, iTunes, QuickTime, Acer Arcade (the laptop owner uses all those apps). Tried running Program Files\Windows Media Player\setup_wm.exe as Administrator, it launched but said that a newer version of WMP was already installed. Deleted the "Windows Media" folder located under %userprofile%\appdata\local\Microsoft then tried starting WMP - wmplayer would launch and terminate immediately. Register wmp.dll by typing "regsvr32 wmp.dll" in an Administrator cmd window then tried starting WMP - wmplayer would launch and terminate immediately. Run "SFC /SCANFILE" in an Administrator cmd window - get an error message that it found invalid system files and could not fix them, so look at the log file cbs.log. The log file shows that there are broken files associated with Windows Sidebar (which the user does not use) but none relating to WMP. Log off to safe mode and run "SFC /SCANFILE" in an Administrator cmd window again - same results. Try to download and install XP WMP - the microsoft.com site recognizes the OS as Genuine and allows the download, but when I launch the installer it says the system is not Genuine. Clicking the link directs me back to IE where I can authenticate the system as Genuine. The installer still fails to recognize the system as Genuine. It is a Genuine Vista installation. Try to run this update (KB931621). The installer said it did not apply to the system. Set Windows Media Player as default in Program Access and Defaults. Same results. Tried running "for %a in (%systemroot%\system32\wm*.dll) do regsvr32 /s %a" in an Administrator cmd window - same results. Went to this Knowledge Base article (947541) and ran the Microsoft Fix It. The Fix It ran successfully, but WMP would still launch and terminate immediately. Multiple reboots in the process of doing all of these steps. After all this, looked in the Application and Security logs. No events pertaining to WMP were logged. The computer was preinstalled with Vista Home Premium and I have the Acer backup DVDs which will reimage the drive. I do not have Vista install DVDs. Reimaging the system is not an option. I'd also rather not restore the system to an earlier point unless it's absolutely necessary. What else can I do to repair or reinstall WMP?

    Read the article

  • My server's been hacked EMERGENCY

    - by Grant unwin
    I'm on my way into work at 9.30 p.m. on a Sunday because our server has been compromised somehow and was resulting in a DOS attack on our provider. The servers access to the Internet has been shut down which means over 5-600 of our clients sites are now down. Now this could be an FTP hack, or some weakness in code somewhere. I'm not sure till I get there. How can I track this down quickly? We're in for a whole lot of litigation if I don't get the server back up ASAP. Any help is appreciated. UPDATE Thanks to everyone for your help. Luckily I WASN'T the only person responsible for this server, just the nearest. We managed to resolve this problem, although it may not apply to many others in a different situation. I'll detail what we did. We unplugged the server from the net. It was performing (attempting to perform) a Denial Of Service attack on another server in Indonesia, and the guilty party was also based there. We firstly tried to identify where on the server this was coming from, considering we have over 500 sites on the server, we expected to be moonlighting for some time. However, with SSH access still, we ran a command to find all files edited or created in the time the attacks started. Luckily, the offending file was created over the winter holidays which meant that not many other files were created on the server at that time. We were then able to identify the offending file which was inside the uploaded images folder within a ZenCart website. After a short cigarette break we concluded that, due to the files location, it must have been uploaded via a file upload facility that was inadequetly secured. After some googling, we found that there was a security vulnerability that allowed files to be uploaded, within the ZenCart admin panel, for a picture for a record company. (The section that it never really even used), posting this form just uploaded any file, it did not check the extension of the file, and didn't even check to see if the user was logged in. This meant that any files could be uploaded, including a PHP file for the attack. We secured the vulnerability with ZenCart on the infected site, and removed the offending files. The job was done, and I was home for 2 a.m. The Moral - Always apply security patches for ZenCart, or any other CMS system for that matter. As when security updates are released, the whole world is made aware of the vulnerability. - Always do backups, and backup your backups. - Employ or arrange for someone that will be there in times like these. To prevent anyone from relying on a panicy post on Server Fault. Happy servering!

    Read the article

  • My PC suddenly doesn't detect the primary drive (SSD)

    - by smoth190
    My computer has been working fine for months, and it worked today, but tonight I went to start it up to find that my OCZ Vertex 2 isn't being found. When I turn on my computer, the loading screen gets stuck at "Detecting IDE drives...". After a while, it keeps going and lists the drives it finds. The first one in the list should be my Vertex 2, but it just says "None". The computer proceeds to get stuck on "Loading operating system...", which is understandable because the drive with the OS is "gone". My first thought was drive failure, but every time drives have crashed on me, they're still detected--they just don't work. This drive is an SSD, it's pretty new, and I had no problems beforehand. I find it hard to believe it failed. I'm sure it's possible, but I hope this isn't the case. There has been nothing strange going on at all with my PC, it's been running perfect until now. I was just about to do my monthly dskchk and defrag today. I popped in my Windows 7 Home Premium disk and booted from it. When I launched the repair tool, it didn't list any operating systems (because the drive is 100% missing...). When I've had disks crash before, it still listed the OS, you just couldn't do anything with it. I tried to restore from an image, but I don't have any of those, either. I opened the command console and listed the drivers with wmic logicaldisk get name. Only C: and D: came up. C: was my 1TB storage driver (luckily, all my stuff is here--only the OS is on the SSD!) and D: was the disk driver. So I still had an MIA drive... The SSD didn't come with any driver disks, so I can't install drivers. If there's a way to do this from a CD I can burn with my other PC, please let me know. What the heck do I do? Although only the OS is on my SSD, a new SSD is expensive. I'll probably also have to buy a new copy of Windows (an upgrade would be nice, though...) because I've found it eats my registration key when my PC crashes (and my thousands of dollars of Adobe programs, I'll be on the phone with tech support for a week to get those keys back). And I'll lose my registry, all my settings, all sorts of other stuff that I'll spend weeks restoring. My computer is a pain in the butt to take out and open up, so if I can't fix it, I'll try fiddling with the plug or putting it into a new computer, but not right now. Any help is greatly appreciated! The day when they make crash-less drives will be the day I live without worry.

    Read the article

  • What router hardware or software should be used when multiple public IPs are routed into the same LAN?

    - by lcbrevard
    I am looking for recommendations to replace a set of consumer grade (Linksys, Netgear, Belkin) routers with something that can handle more traffic while routing more than one static public IP into the same LAN address space. We have a block of static public IPs, 5 usable, with Comcast Business. Currently four of them are in use for: General office access Web server Mail and DNS servers Download and backup web server for separate business All systems (a mixture of physical and virtual) are in the same LAN address space (10.x.y.0/24) to enable easy access between them inside the office. There are 30 or more systems in use depending on which virtual machines are currently active. We have a mixture of Windows, Linux, FreeBSD, and Solaris. Currently a separate consumer grade router is used for each of the four static addresses, with its WAN address set to the specific static address and a different gateway address for each: uses 10.x.y.1 - various ports are forwarded to various LAN IPs on systems with gateway 10.x.y.1 uses 10.x.y.254 - port 80 is forwarded to a server with gateway 10.x.y.254 uses 10.x.y.253 - ports for mail and dns are forwarded to a server with gateway 10.x.y.253 uses 10.x.y.252 - ports as needed are forwarded to server with gateway 10.x.y.252 Only router 1. is allowed to serve DHCP and address reservation based on the MAC is used for most of the internal "server" IP addresses so they are at fixed values. [Some are set static due to limitations in the address reservation capabilities of router 1.] And, yes, this really does work! But... I am looking for: better DHCP with more capable address reservation higher capacity so I don't have to periodically power cycle the routers One obvious improvement would be to have a real DHCP server and not use a consumer grade router for that purpose. I am torn between buying a "professional" router such as Cisco or Juniper or Sonic Wall verus learning to configure some spare hardware to perform this function. The price goes up extremely rapidly with capabilities for commercial routers! Worse, some routers require licensing based on the number of clients - a disaster in our environment with so many virtual machines. Sorry for such a long posting but I am getting tired of having to power cycle routers and deal with shifting IP addresses afterwards!

    Read the article

  • Can't ping Ip over bridge

    - by tmn29a
    I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

    Read the article

  • Linux software RAID6: 3 drives offline - how to force online?

    - by Ole Tange
    This is similar to 3 drives fell out of Raid6 mdadm - rebuilding? except that it is not due to a failing cable. Instead the 3rd drive fell offline during rebuild of another drive. The drive failed with: kernel: end_request: I/O error, dev sdc, sector 293732432 kernel: md/raid:md0: read error not correctable (sector 293734224 on sdc). After rebooting both these sectors and the sectors around them are fine. This leads me to believe the error is intermittent and thus the device simply took too long to error correct the sector and remap it. I expect that no data was written to the RAID after it failed. Therefore I hope that if I can kick the last failing device online that the RAID is fine and that the xfs_filesystem is OK, maybe with a few missing recent files. Taking a backup of the disks in the RAID takes 24 hours, so I would prefer that the solution works the first time. I have therefore set up a test scenario: export PRE=3 parallel dd if=/dev/zero of=/tmp/raid${PRE}{} bs=1k count=1000k ::: 1 2 3 4 5 parallel mknod /dev/loop${PRE}{} b 7 ${PRE}{} \; losetup /dev/loop${PRE}{} /tmp/raid${PRE}{} ::: 1 2 3 4 5 mdadm --create /dev/md$PRE -c 4096 --level=6 --raid-devices=5 /dev/loop${PRE}[12345] cat /proc/mdstat mkfs.xfs -f /dev/md$PRE mkdir -p /mnt/disk2 umount -l /mnt/disk2 mount /dev/md$PRE /mnt/disk2 seq 1000 | parallel -j1 mkdir -p /mnt/disk2/{}\;cp /bin/* /mnt/disk2/{}\;sleep 0.5 & mdadm --fail /dev/md$PRE /dev/loop${PRE}3 /dev/loop${PRE}4 cat /proc/mdstat # Assume reboot so no process is using the dir kill %1; sync & kill %1; sync & # Force fail one too many mdadm --fail /dev/md$PRE /dev/loop${PRE}1 parallel --tag -k mdadm -E ::: /dev/loop${PRE}? | grep Upda # loop 2,5 are newest. loop1 almost newest => force add loop1 Next step is to add loop1 back - and this is where I am stuck. After that do a xfs-consistency check. When that works, check that the solution also works on real devices (such a 4 USB sticks).

    Read the article

  • Correcting tree from messed up file tree in NTFS partition

    - by Fullmooninu
    It's a real messed situation, but I'm quite at the end of my options. It's my personal hardrive, so it's very important for me, and yes, I have no backup =( The short story: 1) I have two discs. One with Windows, and another where I had a bit of empty space at the front of the disk, so i could install Linux. The rest was occupied by a 1.8TB NTFS partition filled with data. 2) I installed Linux, and after a while realized there was not enough space for everything, so I tried using Gparted, and told it to re-size the NTFS partition, to a lesser size. 3) The system jammed. I had to reboot and broke the Resizing operation. Here's what I did to fix it: a) Rebooted into Linux Live, and used Testdisk,to deep analyze the disk, and recover the possible partitions. It found several versions of the NTFS partitions, probably made during the resizing. I told Testdisk to open every one of them, and only one could list its files. When trying to open the other options on Testdisk, it showed an error message. I assumed the one without errors, to be the correct one, and I told Testdisk to recover the partition, and write a new MBR. b) The partition had errors, and Linux has a NTFS fixing tool, used it, but the system still had errors. c) So I booted into windows and use chkdsk to correct all errors in the partition. d) Everything seems fine, but now, back in Windows, when I open one file, it opens another file, or part of another file. As in, some files took up the position of other files. What I think happened is that I recovered an old tree, and not the most current one. And that one just happened to be intact, while the most recent one was damaged. As such, the files that were moved during the failed resizing, were now, during the automatic correction, assumed wrongly to be in their correct places. So when I open a file, it tries to open another one. Radiohead - Creep.mp3 will open and it will actually be a bit from another song, or even code from a jpg. Some files seem to be all right, but others have seemed to have had their position taken by others. Anyone knows of something really powerful that can help me solve this?

    Read the article

  • VLAN issues between linux kernels 2.6 / 3.3 in an ESX / Cisco environment

    - by David Griffith
    I shall attempt to explain an issue I have encountered - I have a VM running on esx 4.1 with an interface connected to VLAN800 via an access port on a cisco 3750. It runs linux - kernel 2.6.24, and has about 5 to 10 Mbit of chatter on 10.10.0.0/16 and various multicast addresses to look after. I needed to isolate certain devices from certain other devices on the network, with all of them having to talk to that one VM. No, the address space can't be separated, nor can the networks be easily vlan'd apart. The software on the VM listens to one interface only. Private vlans appear to be the way to go. So as a test, I built a bridge on the VM that globs together the vlans as needed. All good, everything works as expected. But occasionally (sigh) there's some latency that trips up a couple of profinet devices on the network because, you know, you're not really supposed to trunk real-time protocols around the place willy-nilly. I shift it to our test/backup server - works nicely, but I don't want it to be running on the test server as we muck around with that a lot. So I says to myself, "I'll put it on a new VM for testing and tweaking." I download a small linux distro with kernel 3.3, and install as a new VM with a the vlans as separate interfaces for testing. I power up the testing VM - ok. I bring up all the separate interfaces - ok. I can ping the production VM, see all sorts of traffic going past with tshark, etc. I build a bridge and put the primary vlan on it - the production VM running 2.6 immediately loses its multicast traffic - Unicast is fine. (?) I shut down the bridge - still no multicast traffic (!?) I power-cycle the production VM(!?!?) - multicast traffic returns. I trunk everything into the testing VM and create vlan interfaces under linux instead - same result, as soon as I start the bridge.... no multicast on the production VM. Ok, so I take a break and leave things alone. I decide to play with a couple of ubiquiti bullet radios - I'm testing various firmware as a side project. I flash a radio with Open-wrt-12.09. I enable a trunk on a port on a cisco on our network so I can muck around with multiple vlans and SSIDs I power up the radio and connect - ok. I create a vlan interface from the trunk.... the same vlan as the production VM wayyyyy over there, three cisco routers away. Ok. I bridge the vlan interface to the wifi interface and immediately get a phone call. The production VM has (suprise!) lost its multicast traffic. Again, nothing comes back until I power-cycle the VM. What the hell is going on?

    Read the article

  • Repair corrupt hard disk on Mac without install CD

    - by Sarah
    The hard disk of my late 2009 MacBook Pro appears to have become corrupted. I am traveling and do not have my install CD (and won't for several weeks, nor will I be anywhere near an Apple store). The hard disk is not the original, which failed in June 2011. It's some Hitachi replacement installed by IT. History: I was typing an email this afternoon, my computer suddenly started making soft clicking sounds and then froze. I was not moving around. I rebooted, which took a while. I heard more clicking sounds and the computer froze at least once again. It's now kind of working, with mdworker sucking up one CPU. There are no awkward hard drive sounds when I run Chrome or play music. However, when I launched Stickies, I found no trace of my saved Stickies. I ran a live disk verification from within Disk Utility, and it reported Problem: As reported, I don't have access to an installation disc and am nowhere near an area where I can get one for at least two weeks. I have the option of asking someone to go to some trouble and expense to get one for me, but I'm not sure it's worth it: I've read that I can use fsck from single-user mode to repair the disk. Should I just try this? Is it risky? I'm concerned that the clicky sound portends imminent (mechanical) hard drive failure, so it's not worth doing a silly repair. This hard disk is backed up, but I definitely won't be able to access the backup while traveling. I'd like to maximize the probability that I can keep using my computer (and all its current files) while traveling. Update I bit the bullet and ran fsck -fy from single-user mode. It only needed one pass (modification) to reach the "okay" stage. However, rebooting took nearly 5 min and involved several rounds of scratchy sounds and a few bad clicks. I'm now back to kind of using my computer (the same files are missing as before). When I ran live disk verification from Disk Utility this time, however, it reported that the volume appears to be OK. Am I right to infer from the scratchy sounds, however, that my hard drive is still rapidly on its way out? Is there anything else I can do to increase its functionality over the next few weeks?

    Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >