Search Results

Search found 17382 results on 696 pages for 'computer science'.

Page 285/696 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• Extract a section of a tgz file

  - by TRiG

  I have a 28.5 GB .tgz file which was created on the command line of a Linux computer, compressing one folder and all its many many subfolders. I now want to extract a single sub-sub folder from that .tgz file, using 7zip on Windows Vista. I can't see a way to do it. Opening the .tgz file in 7zip just shows the .tar file inside it. There doesn't seem to be any way to browse that .tar file and extract the section I want. I assume there is a way to do this, but I can't see it. Simply double-clicking on the .tar file brings up a progress bar which runs slowly till my computer complains it's running out of space; I imagine it's trying to extract the whole thing. Searching for "extract section of tgz" and "extract tgz subfolder" and similar found me a way to do it on the Linux command line, but no obvious way to do it on Windows. (Most results found were about extracting into a subfolder, not extracting a subfolder out of the archive.)

  Read the article

• Very slow connection to xserve via afp or smb

  - by Mhoffman13

  Help. File transfer and connection speed to our Xserve are painfully slow from newly purchased iMacs. The Xserve is only used as a file server, its running 10.4.11. The problem seems to be only happening on brand new iMacs running 10.6.3. When connected either over afp or smb copying files is many times slower than usual. Other machines on the network running either 10.4 or 10.5 have a normal connection speed. To try to rule out OS incompatibility I connected the new iMac running 10.6 to another computer running 10.4 over the network. The file transfer speed was fast as normal. So it seems the problems lies with the X serve (maybe). The afp logs either access or error don't show anything unusual. One thing that did look different was when the imac was connected to the Xserve the user had its id listed as its IP address. The other machines connected, had the id of broadcasthost. I also noticed that when connected from the new iMac I can only see one of the mirrors. When any other computer connects both mirrors are shown. Tried a restart of the Xserve but the problem persists. Thanks in advance for any advice

  Read the article

• Why do disk images hosted on a read-only HFS+ partition behave differently?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• Files deleted. What could have happened?

  - by jjfine

  I'm having a weird issue today. I was writing and testing out some simple cgi scripts this morning when I realized that I couldn't run them from one of the other computers on the (windows) network. So I had my network admin come in and take a look at what was going on. A few minutes later a co-worker came in and told me that a bunch of files he was working with as well as a bunch of others (all *.c files) on the network drive got deleted. He also noticed some strange apache_dump_500.log.txt files in the same directories where the files got deleted. The apache_dump_500.log.txt files all look like this: REDIRECT_HTTP_ACCEPT=*/*, image/gif, image/x-xbitmap, image/jpeg REDIRECT_HTTP_USER_AGENT=Mozilla/1.1b2 (X11; I; HP-UX A.09.05 9000/712) REDIRECT_PATH=.:/bin:/usr/local/bin:/etc REDIRECT_QUERY_STRING= REDIRECT_REMOTE_ADDR=<my computer's local ip> REDIRECT_REMOTE_HOST= REDIRECT_SERVER_NAME=<my computer's domain url> REDIRECT_SERVER_PORT= REDIRECT_SERVER_SOFTWARE= REDIRECT_URL=/cgi-bin/trojan.py I looked and I don't have any trojan.py in my cgi-bin folder. And all my apache logs are clean. Windows event logger seems to not have any traces of what happened either. My httpd.conf: http://pastebin.com/Yny2Yh8v I think we've got some kind of virus that added this trojan.py file to my cgi-bin, ran the script, and deleted the script and any traces from the logs. Is this a thing that happens? Any ideas whatsoever would be much appreciated!

  Read the article

• Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

  - by Steve

  I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

  Read the article

• Organizing automatically Windows Files and Folders

  - by Kiquenet

  For Windows only, Organizing the eleventy-billion files you've got stuffed into folders on your hard drive is very "hard". For example, I have one folder on my computer that I save all web downloads to, regardless of file type, size or purpose. Many of the files are only temporary downloads, for instance setup files of applications that I test, demonstration videos that I watch once or documents that I want to read. Some files on the other hand are there to stay, and I used to move them out of the download folder manually in the past. Another files in folders in my computer: many source code, tests, programs, tools, ... I need tecnology for organize billion files. Which best tools for organize, sort, etc automatically your files-folders? Digital Janitor http://davidevitelaru.com/software/digital-janitor/ Belverede http://lifehacker.com/5510961/how-to-automatically-clean-and-organize-your-desktop-downloads-and-other-folders Download Mover http://www.neoteo.com/download-mover-reorganiza-tus-descargas-14188 File/Folder Date Organizer http://seedling.dcmembers.com/other/ffdorg.zip DropIt http://www.lupopensuite.com/db/dropit.htm Others issues about organization files, desktop, etc How to automate the process of organizing audio files on Windows Organizing My Windows Desktop What's a good way for organizing PDF documents on Windows? Folksonomy tagging for files What is your method of “folksonomy” tagging for files on your local machine?

  Read the article

• How do I fix error 1303 during TI Connect install?

  - by smoth190

  I recently purchased a TI-84 Plus graphing calculator, and I'm trying install the TI Connect software in order to connect the calculator to my computer via the USB cable. Unfortunately, I'm getting this error while trying to install the program: Error 1303. The installation has insufficient privileges to access this directory: E:\Data\Timothy\Documents\MyTIData. The installation cannot continue. Log on as administrator or contact your system administrator. However, my account is the only account on my PC, and it has administrative privileges. I've also tried running the installer with Run as Administrator, but with no luck. If I create the folder MyTIData manually, I receive this error: Error 1317. An error occurred while attempting to create the directory: E:\Data\Timothy\Documents\MyTIData I've reapplied the security settings to the E:\Data folder (and all its sub-directories) to Full for my account. I've also gone into Computer Management, and given SYSTEM full privileges for the entire disk. I've also logged out, logged back in, restarted, etc. but still, no luck. Now, I should mention that my Documents folder is not at the default location. I changed it due to my C: disk being a 90GB SSD, so I moved all my personal data onto the extra storage disk (which is ~1TB). I don't know if that is causing the issue, but it can't hurt throwing it out there. So why can't I install this program? Google'ing the problem brings up this error for various other installers (such as Visual Studio and Microsoft Office), but nothing for TI Connect. All the solutions are the same: Give the folder Full privileges...but I've already done this! I've also tried running the installer with and without the calculator plugged in, but it didn't change anything. In the prompt that contains the error, repeatedly clicking Retry or waiting a few moments before clicking Retry also produces no result.

  Read the article

• VLAN Tagging Traffic on Cisco Switch

  - by David W

  I have a situation where I'm setting up multiple VLANS on a pfSense firewall on the same physical interface for a client. So in pfSense, I now have VLAN 100 (employees) and VLAN 200 (students - student computer lab). Downstream from pfSense, I have a Cisco SG200 switch, and coming off of the SG200 is the student lab (running on a Catalyst 2950. Yes, that's old, but it works, and this is a poor nonprofit we're talking about). What I'd like to do is tag everything on the network as VLAN 100, except for the student computer lab. Earlier today when I was on-site with the client, I went into to the old Catalyst 2950, and assigned all of its ports to access VLAN 200 (switchport mode access vlan 200) without setting up a trunk on the Catalyst or on the SG200. Looking back on it, I now understand why internet in the lab broke. I reverted the lab back to the default VLAN1 (we're still running on a different firewall - we haven't deployed pfSense -, and the traffic is still separated physically). So my question is, what do I need to do in order to properly deploy this scenario? I believe the correct answer is: Ensure VLANs 100 and 200 are setup in pfSense, and that DHCP is operating correctly (on separate subnets) Setup a trunkport VLAN that allows both 100 & 200 traffic, and plug that port directly into pfSense. Setup a VLAN 200 trunkport on the SG200 (It's not running iOS, but if it were, the command would be switchport trunk native vlan 200), which will then plug into the Catalyst 2950. Setup a VLAN 200 trunkport on the Catalyst 2950 (that is plugged into the SG200 VLAN200 port with the same command - switchport trunk native vlan 200) Setup the rest of the ports on the old Catalyst 2950 in the lab to be access ports on VLAN200. Is there anything that I'm missing, or do I need to tweak any of these steps, in order to properly segment the network traffic?

  Read the article

• Will wear induced by turning computers off in the evening be offset by energy savings?

  - by sharptooth

  I'm asking this here because this is primarily a huge office scenario and administrators will more likely have the answer I'm looking for. Employees' desktop computers can be either left turned on for the whole night or switched off in the evening and turned back on in the morning. The latter will surely save energy. In the same time turning on and off is very harmful for the equipment - hardware often breaks specifically when turned on. Both energy and hardware replacements cost money. With energy it's quite obvious - you pay every month according to what your power meter shows. With hardware replacements it's worse - you need qualified stuff to quickly diagnose the problems and once something breaks the affected employee will have to wait for some time while his computer is fixed/replaced and the data is recovered. So the company has to choose between saving money on energy and saving money on computer maintaince and lost hours. Such decisions must be well though. Is there any detailed study of how turning computers off each evening affects their lifetime?

  Read the article

• Setting up port forwarding for web server

  - by Javier Badia

  This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

  Read the article

• ubuntu 9.04 pptp broken after a power failure

  - by kevin42

  I have a small Ubuntu 9.04 router setup as a NAT box and a PPTP server. After a power failure everything except the PPTP server still works. A windows client gets to "registering your computer on the network" but then says Error 742: The remote computer does not support the required data encryption type. I did some research and I think the problem is with the ppp_mppe module. When I try to run 'modprobe ppp_mppe' it hangs indefinitely. What would cause this hang? Any ideas how I can troubleshoot this further? Thanks for the help! UPDATE: I am still having the problem, however I have found some more information. When the first user tries to connect to pptp, the process list shows modprobe sha1 running, and one instance of modprobe ppp_mppe for each connection attempt. If I killall modprobe at this point the next connection attempt works, and everything is fine until the next reboot. I'm planning to do a clean install at some point in the future but I'd really like to get to the real cause of this.

  Read the article

• Dell XPS 1530 DVD-RW firmware problem

  - by josecortesp

  Hello everyone. I have this XPS laptop since a year and a half ago. About 2 months ago, with the waranty expired, i tried to run the optiarc slot load DVD-RW firmware update, and said everything was okay. Then I restarted it and the problem started: Now, every single time I turn on my computer, it get stuck at the BIOS POST until the drive sounds like "ready" and then the computer starts normally. And this happen EXACTLY the same when it's getting back from sleep. I'm pretty sure is not a software issue, because I tried with Vista Home Premiun 32 bits, Ubuntu (from 8.10+)32 & 64, and with W7 64. Already tried to run the firmware installer like a million time, in case it is a failing install with no luck. Also, google it to see if someone has the same problem, and again, no. The Drive performs pretty okay once the System is on, but waiting to the drive to be ready everytime is really annoying. The Firmware I updated was this, and the drive is: K937C Assembly, Dvd+/-rw, 8, SLOT, 1530 Sony Nec Optiarc Inc. I'll apreciate any help you can give me

  Read the article

• How can laptop keyboard keys be removed and replaced?

  - by Lord Torgamus

  I'm trying to fix a laptop keyboard that has issues with keys on its left side. Just by feel, it's clear that something sticky got under there. There could be something crunchy too, but that might just be the sound of the key's spring releasing itself from the sticky. I don't know the cause because it's not my computer and the owner isn't sure, but I'm guessing soda spill for now. The computer is an HP dv2500. I've removed the keyboard and blown under it but that hasn't helped. I didn't use compressed air because I just don't have any available, but I suspect it wouldn't help with sticky. So, I'd like to pop they keys off and clean with damp cotton swabs or similar. Is there a proper way to remove the keys? I've found some instructions via Google for non-laptop keyboards, but they don't seem like they'd work for me. Alternate solutions to the problem also welcome, but I've been curious about how to remove the keys for some time for other reasons.

  Read the article

• Internet Explorer not working after establishing a SSTP VPN connection

  - by Massimo

  I have a problem which is constantly appearing on each Windows 7 computer I'm using, whenever I establish a SSTP VPN connection to a ForeFront TMG 2010 firewall; it only happens with SSTP connections, not PPTP/L2TP ones. The problem appears only if using a proxy server for Internet access; it doesn't happen when directly accessing the Internet (with or without NAT). It doesn't seem to depend on a specific proxy software being used (I've seen it happening with various ones). The problem is: as soon as I start the VPN connection, Internet Explorer can't access anything anymore. I'm not using the VPN connection as a default gateway, and I can succesfully ping the proxy server after the VPN connection is esatablished (and even telnet to its 8080 TCP port), so this is definitely not a routing problem. Also, the problem is specifically related to Internet Explorer: while it seems not able to connect to any site, other programs (such as FireFox) have no problem accessing the Internet through the same proxy. This behaviour can be easily reproduced on any Windows 7 computer (the service pack and patch level doesn't seem to matter at all). Have IE connect through a proxy, establish a SSTP VPN connection... and IE will just not work anymore until the VPN connection is dropped.

  Read the article

• Xampp can't start apachem windows xp

  - by jribeiro

  I formatted my computer a week ago. Installed wampp on windows xp, git and everything I needed. When I run git for the first time it told me it had a problem with my user folder (because of the accents) so I created a new user and migrated everything to the new one. After this wampp wouldn't start anymore. I uninstalled it and installed xampp which is what I'm using now. My problem is that even though I requesed xampp to install Apache as a service it isn't installed. It doesn't show in windows services screen. Xampp control panel shows mysql service running ok. When I click to install apache as a service it returns no error. When I click start apache no error is outputed. No file and no errors under c:/xampp/apache/log/ If I restart computer it says that apache service is not installed. I tried to reinstall wampp and the same problem occurs. If I run netstat -a -no nothing is running on port 80! What can I do??

  Read the article

• Problems installing Windows service via Group Policy in a domain

  - by CraneStyle

  I'm reasonably new to Group Policy administration and I'm trying to deploy an MSI installer via Active Directory to install a service. In reality, I'm a software developer trying to test how my service will be installed in a domain environment. My test environment: Server 2003 Domain Controller About 10 machines (between XP SP3, and server 2008) all joined to my domain. No real other setup, or active directory configuration has been done apart from things like getting DNS right. I suspect that I may be missing a step in Group Policy that says I need to grant an explicit permission somewhere, but I have no idea where that might be or what it will say. What I've done: I followed the documentation from Microsoft in How to Deploy Software via Group Policy, so I believe all those steps are correct (I used the UNC path, verified NTFS permissions, I have verified the computers and users are members of groups that are assigned to receive the policy etc). If I deploy the software via the Computer Configuration, when I reboot the target machine I get the following: When the computer starts up it logs Event ID 108, and says "Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was: An operations error occurred." There are no previous log entries to check, which is weird because if it ever actually tried to invoke the windows installer it should log any sort of failure of my application's installer. If I open a command prompt and manually run: msiexec /qb /i \\[host]\[share]\installer.msi It installs the service just fine. If I deploy the software via the User Configuration, when I log that user in the Event Log says that software changes were applied successfully, but my service isn't installed. However, when deployed via the User configuration even though it's not installed when I go to Control Panel - Add/Remove Programs and click on Add New Programs my service installer is being advertised and I can install/remove it from there. (this does not happen when it's assigned to computers) Hopefully that wall of text was enough information to get me going, thanks all for the help.

  Read the article

• Wake on Demand for Apache server in OS X 10.8

  - by Gary

  Mac OS X Mountain Lion does not have a Web Sharing box in the Sharing system prefs menu. It is thoroughly discussed on the web that the Apache server is available, and that it can be turned on manually in the command line, or by using a convenient Prefs Pane. That works while the computer is awake. But, when my computer goes to sleep, the server stops working, even though Wake for Network Access is checked in the Energy Saver Pref Pane. From the discussion on Bonjour, I see that this problem probably results from the fact that Apache isn't registered with Bonjour. Does that sound likely? If not, please make some suggestions. The connection is via hard-wired ethernet. If registration with Bonjour is the problem, I'd like to know how to register it. You gave a nice description of dns-sd, and the command description says dns-sd -R Name Type Domain Port [TXT...] (Register a service)", but I don't know what to use for "Name" or "Type", or the format of the domain. I tried some dns-sd -B searches and found nothing I could use as a model, and it doesn't show up in Bonjour Browser. Any suggestions would be appreciated.

  Read the article

• How can I get Windows 8 to automatically disable touch when I am using my Wacom pen and turn it back on when I am not

  - by Robert

  I have an HP convertible tablet computer which I just upgraded to Windows 8. The problem (which existed under Windows 7 as well) is that this tablet has both a capacitive touch screen (with multi-touch) AND a wacom-type tablet built in to the screen that works using electro-magnetic resonance with the provided stylus. My Use Case: Most of the time I am happy using my fingers and the touch interface for navigation and whatnot. However, when I want to get down to serious note-taking/drawing, I want to use the wacom functionality. The problem is that any comfortable writing position has me resting my arm/hand on the screen, which activates the touch technology (despite supposed palm-detection algorithms) and completely screws up my input paradigm. My Ideal Solution: Ideallly, since wacom technology senses when the pen is "close" to the screen, I would love to have touch be automatically disabled whenever the wacom pen is detected, and turned back on when it is out of range. this would allow me to seamless switch between the two input methods, and since I NEVER want to use both at once would work perfectly for me. An acceptable alternative: As a next best option, It would be great to be able to turn off the touch functionality (leaving the wacom in place) whenever I entered specific apps (e.g. OneNote, Photoshop, Gimp, Pencil, etc.) and then have it turn back on when I left that app.... As a worst case at least lets me use my PC option: If I could create a shortcut (tile or otherwise) that flips the touch on and off without going all the way through the nested computer settings, that would be better than nothing. Thanks in advance for the help with 1 or more of the above.

  Read the article

• Recover hard disk from Raw format

  - by user1632736

  I have been all over the web today with no results. So my drive was encrypted (truecrypt) the whole drive where windows resided. I decided to partition it to install W8 and forgot it was encrypted. So the drive got damaged and not accessible. When connected to a computer it asks for formatting. Somehow I enabled the drive through TrueCrypt on another computer and I could see and get all the files. Then I decided to decrypt the drive thinking that everything would be back to normal. After decryption my drive is not NTFS it is in RAW format. I am trying every possible way to recover, and I am desperate enough to ask lol. I tried: ddrescue (linux) (not mountable, no signature, ntfsfix no good) testdisk (linux and windows) Sees the partitions but cant do anything Many recovery applications. etc etc. I read in different places that doing a quickformat to NTFS and then doing a data recovery might help. I would definitely like a second opinion. Any suggestion would be really helpful

  Read the article

• Super slow opening my downloads folder

  - by Mark

  I have an exe file in my download folder that I half downloaded through utorrent (it's not piracy, a legit file from people who use bittorrent to distribute large files). I think I tried to open it while it was still sharing, that is, did not stop the upload. That actually froze my computer. When I restart in utorrent I set the file to be deleted. Unfortunately even though utorrent doesn't see that file anymore, it's still visible in my download folder. Whenever I try to open my download folder it literally takes 10 minutes or more. It opens, but is empty and the blue progress bar needs a long time to complete. After completion I can use the download folder normally, but opening and closing things in that folder takes a long time. I see the exe that I tried to download. I tried to delete it. But it was taking so long 30+ minutes that I eventually just hit cancel. That doesn't even work, and it was slowing down the computer. Couldn't figure out how to stop the delete so I just pulled the plug. Should I just forget about that dl folder and set a new one? Is there something I can do? Thanks.

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• Printer spooler service stop running when sent print job

  - by Hanan N.

  Every time i am sending a print job to the printer, i am don't get any response from the printer, and at the printer job list at the status of the job, i see that there was an Error, but it don't give me any clue on what could be the problem. After some investigation i found that every time that i send the print job to the printer the printer spooler service stops to run, then after a second or two it start again (i think that this behavior is related to the printer spooler settings to rerun it self after it stops). Things that i have tried so far: Remove and Install again the Driver. After removing the driver, i have removed the unnecessary registry keys according to this article from Microsoft, these are: Rename all files and folders in: c:\windows\system32\spool\drivers\w32x86 Remove anything but Drivers Print and Processors: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x86 Remove anything in here: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors but: BJ Language Monitor Local Port Microsoft Document Imaging Writer Monitor Microsoft Shared Fax Monitor Standard TCP/IP Port USB Monitor WSD Port Disconnect and Reconnect the Printer. Clean the computer from Viruses & Spywares. Currently i am stuck, i have no more things to try, if anybody know about any kind of solution please let me know about it. Since i am want to keep this post as general problem that relate to the printer spooler, and not just my particular problem, i didn't included inside the windows version & the printer model, they are (although i think that it isn't relate just for that particular model): Windows 7 32bit, HP Officejet 4500 G510g-m (connect to the computer via USB). Thanks.

  Read the article

• Index a low-cost NAS on Windows 7

  - by JcMaco

  Has anyone found a way to index the files stored on a Networked Attached Storage on Windows 7 so that the files can be available in Windows Search and Libraries? I am referring to the cheap and available NAS like the Western Digital My Book series that use an embedded linux server. Similar question: http://windows7forums.com/windows-7-networking/6700-indexing-nas-drive-libraries.html EDIT Windows help proposes to make the files stored on the NAS available offline. This is obviously not a good solution if the NAS has more data than what the client can store. If the folder is on a network device that is not part of your homegroup, it can be included as long as the content of the folder is indexed. If the folder is already indexed on the device where it is stored, you should be able to include it directly in the library. If the network folder is not indexed, an easy way to index it is to make the folder available offline. This will create offline versions of the files in the folder, and add these files to the index on your computer. Once you make a folder available offline, you can include it in a library. When you make a network folder available offline, copies of all the files in that folder will be stored on your computer's hard disk. Take this into consideration if the network folder contains a large number of files.

  Read the article

• Routing for remote gateway over VPN in Vista/7 broken?

  - by Raymond

  Hi, Situation is as follows. Home computer running Windows 7, sets up VPN connection (LT2P + IPSec, "use remote gateway" disabled) to office. Subnet is 192.168.64.x Office has Draytek Vigor 2920 router, subnet is 192.168.32.x What happens? - VPN connection itself works fine - Can ping any machine on the remote network - When trying to open a webpage from a host in the remote network, the remote server logs the incoming request, but the browser hangs on "waiting for..." and eventually times out. I have observed this problem on Windows Vista and Windows 7. On Windows XP however there is no problem like described above. The only clue I have is that there is a difference in the routing between XP and Vista/7. The output of "route print" on Windows XP looks like this: (See www.latunyi.com/routing_xp.png) So here the gateway for the 192.168.32.x subnet is the IP address that the local computer has in the remote network. The output of "route print" on Windows 7 (and Windows Vista) looks like this: (See www.latunyi.com/routing_win7.png") Now the gateway for the 192.168.32.x subnet is the IP address of the VPN router (32.1). I don't know if that causes this trouble, but it seems a bit strange. Enabling "use default gateway on remote network" doesn't make a difference. Using the new option "Disable class based route addition" in Windows 7 only makes the route to the VPN router disappear. I am really puzzled here. I assume the VPN routing can't be broken in both Vista and Windows 7, and this should just work without manually adding routes. I hope someone has a solution for this problem :-). Thanks!

  Read the article

• Looking for a real DisplayPort hub/splitter

  - by squircle

  In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks! Edit: I've checked out the similar-looking Cirago DisplayPort splitter, but I have extreme doubts as to whether or not it's a genuine displayport splitter, or just another monitor-conglomerate. Their DVI solution looks identical to Dell's, which I'm pretty sure won't do what I want. I also don't want to order this DisplayPort "hub" and find that it doesn't do what I want it to.

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >