Search Results

Search found 10406 results on 417 pages for 'device'.

Page 285/417 | < Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >

• MacBook repeatedly disconnects from WiFi

  - by redwall_hp

  I have an early 2008-model MacBook (2.4GHz). The WiFi router I have at home is a Linksys WRT54GX2 that I have had for a few years. My MacBook has recently started disconnecting from the router every few minutes, which is rather annoying. I can reconnect again without having to restart the router or anything, as it seems that the MacBook is just dropping the connection. I have tried changing the channel on the router, and upgrading the laptop from Leopard to Snow Leopard made no difference either. I'm only about six feet from the linksys device, so distance isn't an issue. This only happens with the Linksys router, while I can use the local library's open network without issue. The problem also seemingly becomes more pronounced after midnight. Any ideas as to what the problem could be?

  Read the article

• Is A Managed Switch With VLAN Support Required

  - by Justin

  Hello, I am wondering if I need to buy a switch which is managed (VLAN support) for my configuration, or will a cheaper unmanaged switch work? I have servers with two NICS each. The first NIC is public and the second NIC is private. The router will plug into the switch port 1 let's say (public). Then server 1 public plugs into port 2 on the switch, and sever 1 private plugs into port 3 on the switch. The public interface is: 192.168.X.X / 255.255.0.0 and the private interface is 10.0.X.X / 255.255.0.0. So looks like: ** SWITCH ** Port Device Network 1 Router/Firewall 192.168.X.X 2 Server 1 Public 192.168.X.X 3 Server 1 Private 10.0.X.X 4 Server 2 Public 192.168.X.X 5 Server 2 Private 10.0.X.X 6 Server 3 Public 192.168.X.X 7 Server 3 Private 10.0.X.X Thanks.

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• arp across subnets which devices can be detected?

  - by Gobliins

  i have some devices connected in the same physical network (LAN) but in different subnets. I want to detect them all with the ARP from my computer. My Computer is also in the same physical network but on a different subnet. ! The devices have no arp protocol installed (yet). Is it possible to detect the devices (with or withour ARP installed on every device)? If the devices have a MAC-address but no IP-address, can ARP still detect the machines?

  Read the article

• How to install Windows on a laptop with no CDROM drive?

  - by Jason Kester

  I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

  Read the article

• Volume expanded in Volume Group, old disk reduced but still in use in system

  - by Yurij73

  Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

  Read the article

• Windows 7 - Static DHCP server address with dynamic IP Address

  - by mkstreet

  Is this possible? On my LAN, I would like to setup the network properties such that the DHCP server's address is static. However, I want that server to hand out the IP Addresses and DNS addresses dynamically. The reason is that some devices on the LAN will try to behave like a DHCP server. For example, we use software to push images to computers on the LAN (our computer software configurations are centrally managed). When that imaging distribution software happens to be running, the machines being imaged will get confused as to which device is the DHCP -- the real one or the machine that is sending them the image. So, to remove the confusion, I would like to setup my Windows 7 images such that the DHCP server address is statically assigned. And then that server would assign the IP Addresses and the DNS addresses dynamically.

  Read the article

• SATA Devices not showing up when in UEFI mode

  - by Dan Barzilay

  I'm trying to install Windows and the bios should be set to UEFI mode. The problem is that all SATA devices aren't showing up (shows as if there aren't any) so I can't boot from the installation CD (it's just not there). The weird thing is that when set to LEGACY mode they all show up.. SATA mode is set to AHCI and I'm on Lenovo Y510P. I have a Linux OS installed that is accessible only when BIOS is in LEGACY mode (otherwise the hard drive it's on is not available) I also tried reseting the BIOS settings which didn't help.. Comment please if more details needed Extra details: Computer model: Lenovo IdeaPad Y510P (not overcloacked) Installed Linux OS version: Linux 3.7-trunk-amd64 x86_64 Trying to install Windows: Windows 7 Ultimate 64bit BIOS Information: Vendor: LENOVO Version: 74CN26WW(V1.07) Update: Using user1608638 answer and suggestion of using the USB flash drive as the boot device instead of the CD/DVD method I succeeded in installing Windows 7! (Thanks alot user1608638)

  Read the article

• In VirtualBox, how can I access host localhost from guest (Visual Studio Dev Server from IE7 testing VM)?

  - by Seth

  Host OS is Win7 running MyApp in the Visual Studio Development Server, bound to localhost:51227, VM is VirtualBox configured with NAT. Guest OS is Win XP with IE7 installed. My goal is to debug MyApp (running on host) from within IE7 (running on guest). Visual Studio Development server only binds to the loopback network device (i.e. localhost). It does not bind to the external IP address of my host. I've tried access 10.0.2.2:51227 from IE7 on the guest (and confirmed that 10.0.2.2 is the gateway address using ipconfig), but it appears that 10.0.2.2 binds to the external IP of the Host, NOT the loopback IP (localhost), so this does not work. Any suggestions?

  Read the article

• What SATA drive should I install FreeBSD onto? i.e. ar0 vs da0 vs ad4/5

  - by Matt

  I'm installing FreeBSD 8.0 on a server that has hardware SATA Raid. I'm just wondering. What is the difference between these devices. i.e. ar0, da0, ad4, ad5 I take it that ad4 & 5 are my two disks. Somehow the OS can see them individually even though it's one logical mirrored drive. Should I be installing it onto ar0 or one of the adX disks. What is da0? it's smaller than the others. ar0 is not some kind of software raid device is it? Just want to make sure I don't mess this up right from the get go.

  Read the article

• insert, delete etc. keys not working on Cherry Strait keyboard

  - by Brabster

  Hey folks, I got a Cherry Strait USB wired keyboard for xmas and I've been unable to get several keys working under Ubuntu 10.10 or Win XP. There are a few keys. including the Print Screen key, insert, end, delete, pg up, pg down and home. I've not been able to identify any others that aren't working. I'm not sure as to the best approach to determine what's wrong. Is there any way to confirm whether there is any output from the keyboard in response to pressing those keys, ideally in Ubuntu as that's where I spend most of my time so that I know if it's a fault with the device itself? (I've tried different USB ports and also hitting those keys whilst in the Keyboard Shortcuts app, no response to these keys)

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Where are messages on Windows Mobile stored? [closed]

  - by user553702

  Where does Windows Mobile 6.0 store text messages that are in Outlook Mobile? I have not been able to find any information on the Web about where physically in the phone's filesystem the mailbox data is stored. I need to back up certain saved text messages before they are automatically overwritten, yet Microsoft provides no way at all to liberate the data. The device is a Palm Treo, and I can connect with Windows through ActiveSync and browse the filesystem, but I have no idea where to start. I may need to use some of this message history for legal purposes and it is important that I be able to preserve it. The normal Outlook on PCs uses .pst files to store a mailbox; is there something similar in Outlook Mobile?

  Read the article

• Newly installed DIR-615 - how to connect to the wireless?

  - by JK123

  I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

  Read the article

• Wyse Simple Imager. Unable to Create Product Directory

  - by Steve

  I am trying to submit a post on www.technicalhelp.de, but I receive an error: Invalid Session. Please resubmit the form. This happens if I delete temporary internet files and log out and back in, and if I use a different browser, and if I use a proxy browser. Perhaps someone on this forum can help I am trying to push a Wyse device image to a USB thumb drive. The image is on a remote server, and the thumb drive is connected to my desktop PC. I am using Wyse Simple Imager to do this. When I select the following: Product: V90 Image Version: 5.010627.512 Image File: \servername\folder\OLD_Rapport\V90-withusb\9V90.i2d Almost instantly, without attempting any action, I receive the message: WyseImager Unable to Create Product Directory. Add Image Failed I have completely formatted the USB drive with FAT32. It is new out of the fox, and I can create folders in it. How do I fix this?

  Read the article

• What is the "real" difference between a NAS and NFS?

  - by warren

  From an end-user perspective, what is the difference between a NAS device and using NFS exports from a file server? They seem to accomplish the same end result. The difference between a SAN and other file storage is related (in my experience) to how they are connected to the server infrastructure. However, the difference between a NAS, connecting over standard ethernet, and NFS (sharing storage off specific servers, also over the network), seems more nebulous. Is there a good reason to pick a NAS filer over NFS on servers?

  Read the article

• cdrom drive doesn't work on laptop

  - by bozdoz

  Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

  Read the article

• Automatically make or update a copy real-time on another hard drive volume whenever files are saved to a particular folder

  - by mrblint

  Whenever I save or update a file to a particular designated folder on my C:\drive I would like to make or update a copy on my network-attached storage device, ideally saving the copy to the NAS as a version rather than overwriting a copy there, if possible. I have Windows 7 x64 Ultimate. Is there any feature built-in that can accomplish this? It has to be a real copy, not merely a pointer. I'm trying to achieve some redundancy for especially critical documents (in a variety of formats) that change frequently throughout the day. P.S. I am looking for folder-level granularity; I wouldn't want this to happen for every file on the C: volume.

  Read the article

• D-link Local wireless

  - by Filippo

  I created a wireless network inside a D-Link DIR-301 connected to a Mac, What I want is that every device to connect to this network if the browser automatically opens instead of the default homepage, it redirects to my website already set in the localhost of the machine which also has the router attached. I'd also like to see that instead of the IP to connect to the site, there will be a "fake" link. What do you advise me? how can I proceed? I state that I am a bit novice in this field, being more a web programmer.

  Read the article

• How can I have a Windows 7 VMware guest without mouse support?

  - by Matthew Read

  Despite having vmmouse.present = "FALSE" mouse.vusb.absDisabled = "TRUE" pref.motionUngrab = "FALSE" in my .vmx file and a customized VMware Tools installation on the guest that does not include the mouse driver, I somehow have fully integrated mouse support for my Windows 7 VM. I can smoothly mouse from the host into the guest without needing to click or Ctrl+G in and Ctrl+Alt out. I don't want this because of the issues it causes with games. How can I get the VM to have no special mouse support while still having VMware Tools installed for its other functions (network, graphics, etc.)? The mouse works as I want without VMware Tools but not otherwise — again, despite not installing the mouse driver and having all those settings trying to disable it. Device Manager shows that the generic Windows PS/2 mouse driver is being used and not the virtual mouse driver. Guest and host are both Windows 7 Ultimate SP1, x86 and x64 respectively. I'm using VMware Player 3.1.4 and the VMware Tools installed is the latest, 8.4.6.16648.

  Read the article

• How to switch easily between a 5.1 headset and 2.1 speakers ?

  - by Wookai

  I have a 5.1 headset that I mostly use for gaming and watching movies. It is connected using 3 jacks to the rear panel of my motherboard (plus one for the microphone). I also have some small 2.1 speakers that I sometimes use to listen to music or to share a video/movie with someone. For now, what I do is crawl under my desk, and switch the cables. As my motherboard has 7.1 capabilities, I am wondering if there could be a way of having all 4 jack cables always plugged in, and switching on which device to output the sound programmatically. Has anybody had a similar problem, and how did you solve it ?

  Read the article

• Software to create a virtual parallel port in Windows XP?

  - by drknexus

  I am writing a program that will eventually be used on a computer with a physical parallel port and will need to set certain pins high or low in order to signal to an external device. However, the development laptop I am using does not have any physical parallel ports and is too low powered to run a virtual machine. Is there any option available that will create a virtual parallel port within Windows XP? Ideally it would include a debug mode that would allow me to see what values have been pushed out on the parallel port.

  Read the article

• Is there a way to share a scanner with an Airport Extreme?

  - by Electrons_Ahoy

  I've got an Airport Extreme as my home network's router. (Sidebar: I love it.) The printer sharing is pretty phenomenal - I've got my printer hooked up to the base station and all the machines in the house can print to it just fine. However, I have one of those combined scanner/printers, and nothing on the lan seems to be able to see the scanner. Is there a way to get the Airport Extreme / Bonjour to also share the scanner half of the device? For the record, this is an all Windows LAN, so I'm using Bonjour for Windows to get the print sharing to work. Also, I'm hoping to not add a whole stack of extra software to the ecosystem - only one machine in the house needs the scanner, so I can just plug the printer back into that machine and share the printer that way. Still, the Airport and Bonjour seem fancy enough that this seems like it should be doable.

  Read the article

• What would prevent a .BAT file from being run on a mapped drive?

  - by JBurace

  In WinXP SP3, I have a .BAT file on a mapped drive. When I try to run this .BAT file (or even right click-edit) it gives me: --------------------------- Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item. --------------------------- OK --------------------------- This happens with any .BAT file, no matter what is within the file. If the file is on my local computer (like C:) it will run just fine. If someone else runs it from another computer (on the same mapped drive), it runs just fine. I have full permissions on the drive; I can edit/delete/save/write/create in that folder and/or .BAT file and I've ruled out permissions being the issue. It seems like a security prevention, but I can't tell what it would be. It would have to be something on my PC, but I don't use any 3rd party software. What would cause this error?

  Read the article

< Previous Page | 281 282 283 284 285 286 287 288 289 290 291 292  | Next Page >