Search Results

Search found 13968 results on 559 pages for 'device dependent routing'.

Page 286/559 | < Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >

  • An alternative to Google Talk, AIM, MSN, et al [closed]

    - by mkaito
    I'm not entirely sure whether this part of stack exchange is the most adequate for my question, but it would seem to me that people sharing this kind of concern would converge either here, or possibly on a more unix-specific sub site. Either way, here goes. Background Feel free to skip to The Question, below. This should, however, help those interested understand where I'm coming from, and where I expect to get, messaging-wise. My online talking place-to-go has been IRC for the last fifteen years. I think it's a great protocol, and clients out there are very good. I still use, and will always continue to use IRC for most of my chat needs. But then, there is private instant messaging. While IRC can solve this with queries and DCC chats, the protocol just isn't meant to work too well on intermittent connections, such as a mobile device, where you can often walk around places with low signal. I used MSN for a while, but didn't like it. The concept was awesome, but I think Microsoft didn't get the implementation quite right. When they started adding all that eye candy, and my buddies started flooding me with custom icons and buzzing my screen to it's knees, I shut my account and told folks that missed me to just email or call me. Much whining happened, I got called many weird things for not using MSN, but folks eventually got over it. Next, Google Talk came along, and seemed to be a lot better than MSN ever was. The protocol was open, so I could use whatever client I felt a fancy for. With the advent of smart phones, I just got myself a gtalk client on the phone, and have had a really decent integrated mostly-universal IM solution. Over the last few months, all Google services have been feeling flaky. IMs will often arrive anywhere between twenty minutes and one hour after being sent, clients will randomly disconnect, client priorities seem to work sometimes, and sometimes just a random device of those connected will get an IM. I think the time has come to look for greener grass. The Question It's rather hard to put what I'm looking for into precise words. I guess I just want something that is kind of like MSN/Gtalk, but that doesn't let me down when I need it. IRC is pretty much perfect, but the protocol just isn't designed to work well on mobile devices. Really, at this point I'm considering sticking to IRC for desktop messaging, and SMS/email on the phone, but I hope that in this day and age there is something better out there.

    Read the article

  • Error while creating a VM using KVM

    - by Karan Gurnani
    I am trying to set up a VM on my Ubuntu 13.04 Desktop and it's giving me error when I try to start the VM. The error states: virsh # start vm1 error: Failed to start domain vm1 error: internal error process exited while connecting to monitor: W: kvm binary is deprecated, please use qemu-system-x86_64 instead char device redirected to /dev/pts/2 (label charserial0) qemu: at most 2047 MB RAM can be simulated What is the workaround for this, if any?

    Read the article

  • NTPD seems to delete all network interfaces

    - by Aurelin
    We have a couple of virtual interfaces configured on eth0 on a CentOS, and every now and then, they went down seemingly out of the blue. Now after going through the log files, I found out that apparently ntpd deletes all eth0 interfaces, and that dhclient automatically brings eth0 back up. The virtual interfaces, however, stay down which causes several of our websites to be inaccessible. Can someone explain to me why ntpd deletes interfaces? Can / should that be turned off, or can / should I configure dhclient to bring the virtual interfaces back up automatically, too? EDIT// The log files that I should've posted : Nov 12 13:10:28 raptor dhclient[20048]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x6a825e97) Nov 12 13:10:42 raptor dhclient[20048]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 (xid=0x24554092) Nov 12 13:10:42 raptor dhclient[20048]: DHCPOFFER from 96.126.108.78 Nov 12 13:10:42 raptor dhclient[20048]: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x24554092) Nov 12 13:10:42 raptor dhclient[20048]: DHCPACK from 96.126.108.78 (xid=0x24554092) Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #31 eth0, 50.116.50.97#123, interface stats: received=3255, sent=3256, dropped=0, active_time=1559394 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #32 eth0:0, 50.116.53.56#123, interface stats: received=3, sent=0, dropped=0, active_time=1559391 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #33 eth0:1, 66.175.211.192#123, interface stats: received=2, sent=0, dropped=0, active_time=1559389 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #34 eth0:2, 50.116.53.95#123, interface stats: received=3, sent=0, dropped=0, active_time=1559387 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #35 eth0:3, 97.107.132.32#123, interface stats: received=2, sent=0, dropped=0, active_time=1559385 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #36 eth0:4, 50.116.56.201#123, interface stats: received=2, sent=0, dropped=0, active_time=1559383 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #37 eth0:5, 66.175.212.121#123, interface stats: received=2, sent=0, dropped=0, active_time=1559381 secs Nov 12 13:10:42 raptor ntpd[2109]: Deleting interface #38 eth0:6, 66.175.215.137#123, interface stats: received=2, sent=0, dropped=0, active_time=1559379 secs Nov 12 13:10:44 raptor NET[1573]: /sbin/dhclient-script : updated /etc/resolv.conf Nov 12 13:10:44 raptor dhclient[20048]: bound to 50.116.50.97 -- renewal in 32692 seconds. Nov 12 13:10:45 raptor ntpd[2109]: Listening on interface #39 eth0, 50.116.50.97#123 Enabled The eth0 config : DEVICE="eth0" ONBOOT="yes" BOOTPROTO="dhcp" IPV6INIT="no" IPADDR=50.116.50.97 NETMASK=255.255.255.0 GATEWAY=50.116.50.1 And the virtual interfaces (I posted the first one only, they look the same for the most part) : # Configuration for eth0:0 DEVICE=eth0:0 BOOTPROTO=none # This line ensures that the interface will be brought up during boot. ONBOOT=yes # eth0:0 IPADDR=50.116.53.56 NETMASK=255.255.255.0

    Read the article

  • On Windows how can I prevent login until a software package has been installed?

    - by Phil Hannent
    I have an MSI which is configured for machine level installation because it is a device driver. I can deploy it via Active Directory and Group Policy just fine. However on a newly booted machine a user can login before the installation has a chance to complete and I get an warning in the event log saying it couldn't complete and will be tried at next reboot. How can I make the login screen wait for the installation to be completed?

    Read the article

  • Cant route VLAN over VPN between Cisco ASA 5505 and Cisco 870

    - by user60984
    We've had an existing VPN between a 5505 and 870 for some time. We've just added VLANs to the network on the 5505 side. We can't seem to figure out how to get devices on the VLANs to communicate with devices on the 870 network which have no VLANs. We're thinking we might have to use a router of sorts to handle the routing before hitting the ASA. We thought PFsense might work well. We've been banging our heads against this thing for 2 days so any immediate help would be great. We're up against a deadline. Thanks!!!

    Read the article

  • How can I filter packets from a port monitor?

    - by engineerchuan
    I have some data going from Point A to Point B. I have a SPAN monitor set up to a monitoring device C. To recreate some real world scenarios, I want to filter out all traffic which is a certain type (H.323 VoIP Signaling Packets) so that C sees a subset of the information that is flowing from A to B. What would the easiest way to do this be? I assume I would need a computer with 2 NIC cards and some software to examine each packet and chuck out the H.323 VoIP packets? Thanks!

    Read the article

  • How to scan local network (LAN) for connected devices (Mac OS)

    - by smotchkkiss
    I'm basically looking for something like this but available on Mac. I am trying to connect a new workstation to our wireless multifunction printer and I'm having a hell of a time getting the device to spit out an IP for me to connect to. Is there a way I can scan the network somehow? If it makes a difference, the new workstation is using Mac OS X 10.6 Thanks in advance :)

    Read the article

  • Opensuse on Acer Aspire One AOA 150

    - by iceman
    Has anyone managed to get Opensuse (any version) with KDE3 running on Acer Aspire One AOA 150 with all the device drivers? References: http://en.opensuse.org/Live_USB_stick http://news.opensuse.org/2009/01/09/unofficial-kde-35-live-cd-for-opensuse-111/

    Read the article

  • Wireless Access Point - Can't ping other machines on the wireless network

    - by Surfer513
    I have a wireless access point (Netgear), and I have it setup so that it has an IP address in the current subnet (let's say 192.168.2.0, subnet mask of 255.255.255.0). The machine that it is connected to via ethernet cable has an IP in the same subnet as the AP. The machines that are connected to the AP via the wireless connection also have an IP address in the same subnet as the rest of the network (192.168.2.0). All machines can ping the access point, but they cannot ping each other. I don't totally understand why, because there is connection and all of the machines are in the same subnet. I realize this is a layer 3 device, but is there an issue because of this AP's lack of gateway capabilities? (i.e. no routing table, etc.)

    Read the article

  • Will being a VPN Client interrupt web pages hosted by IIS?

    - by f1gm3nt3d
    We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

    Read the article

  • How do I stop IIS from sending minutely GET requests to my proxied mongrel server?

    - by brad
    I have a rails application running on Windows Server 2008 running IIS7.5. I am using Application Request Routing to send requests to the Mongrel server via IIS (I didn't want to set it up like this but this was the environment I have been forced to use). IIS seems to send a GET request to the Mongrel server once every minute. This is not a huge deal but it does cause a lot of pollution in my logs and also creates a large amount of unwanted session data. I would really like to stop it from doing this. Is there a way?

    Read the article

  • Sonicwall networking

    - by Syed
    My Sonicwall LAN subnet is 192.168.1.0/24 X0: LAN IP 192.168.1.253 I also have intranet router 192.168.1.108 routing to 192.168.2.0/24 network. Internet is through WAN (X1) is all working fine. My LAN PC's can connect to intranet 192.168.2.0/24 via static route from LANsubnet to 192.168.2.0/24 as 192.168.1.108 as gateway. Now I have LAN2 10.2.1.254 (10.2.1.0/24)on X4 port. I can access Internet from LAN2, now I want to allow intranet from LAN2. What static routes do I need to make this work?

    Read the article

  • Determining the health of a Cisco switch port?

    - by ewwhite
    I've been chasing a packet-loss and network stability issue for a handful of end-users on an internal network for the past few days... These issues surfaced recently, however, the location was struck by lightning six weeks ago. I was seeing 5-10% packet loss between a stack of four Cisco 2960's and several PC's and phones on the other side of a 77-meter run. The PC's were run inline with the phones over a trunked link. We were seeing dropped calls and interruptions in client-server applications and Microsoft Exchange connectivity. I tried the usual troubleshooting steps remotely, having a local technician do the following during breaks in user and production activity: change cables between the wall jack and device. change patch cables between the patch panel and switch port(s). try different switch ports within the 2960 stack. change end-user devices with known-good equipment (new phones, different PC's). clear switch port interface counters and monitor incrementing errors closely. (Pastebin output of sh int) Pored over the device logs and Observium RRD graphs. No link up/down issues from the switch side. change power strips on the end-user side. test cable runs from the Cisco 2960 using test cable-diagnostics tdr int Gi4/0/9 (clean)* test cable runs with a Tripp-Lite cable tester. (clean) run diagnostics on the switch stack members. (clean) In the end, it took three changes of switch ports to find a stable solution. The only logical conclusion is that a few Cisco 2960 switch ports are bad or flaky... Not dead, but not consistent in behavior either. I'm not used to seeing individual ports die in this manner. What else can I test or check to determine if these devices are bad? Is it common for single ports to have problems, rather than a contiguous bank of ports? BTW - show cable-diagnostics tdr int Gi4/0/14 is very cool... Interface Speed Local pair Pair length Remote pair Pair status --------- ----- ---------- ------------------ ----------- -------------------- Gi4/0/14 1000M Pair A 79 +/- 0 meters Pair B Normal Pair B 75 +/- 0 meters Pair A Normal Pair C 77 +/- 0 meters Pair D Normal Pair D 79 +/- 0 meters Pair C Normal

    Read the article

  • Transfer VLAN tagged packets over WLAN?

    - by stefan.at.wpf
    I have the following composition of devices: [selfmade router] - ethernet - [WLAN router 1] ----- wlan ------ [WLAN router 2] WLAN router 2 has 5 ethernet ports, each as an own VLAN, so 5 VLANs. I want to manage the routing and firewalling between those VLANs at selfmade router. What technique would I use to pass the tagged vlan packets from WLAN router 2 to selfmade router? Could I use a bridge from WLAN router 2 to WLAN router 1 which itself has a bridge from WLAN router 1 to selfmade router or do I have a wrong understanding of a bridge? Thanks for any hint on this :-)

    Read the article

  • SBS 2003 Event ID 3005 (ActiveSync Related)

    - by lance-gallant
    I've recently noticed the following Error in my Server logs. Happens whenever Mobile device user attempts to syncrhonise using OMA. The error is logged on the server, but the user is able to sync, albeit slowly. Event Type: Error Event Source: Server ActiveSync Event Category: None Event ID: 3005 Date: 16/03/2010 Time: 01:22:20 PM User: xxxxxx Computer: xxxxxx Description: Unexpected Exchange mailbox Server error: Server: xxxxxx User: xxxxxx HTTP status code: [409]. Verify that the Exchange mailbox Server is working correctly.

    Read the article

  • Windows Movie Maker 2012 No Sound issue with Windows 8.1

    - by zzlalani
    I've windows 8.1 pro Build 9600 x64 installed, I have recently installed Windows Movie Maker 2012 (Latest) via Windows Live Essential, Now when I run Movie Maker it disable Movie Maker sound as well as all windows sound and keeps it mute until I close Movie Maker, as per their suggestion Huge Problems With Movie Maker Sound I have also updated my audio drivers, I'm using Dell Inspiron 15R 5520, and I have this audio device/driver Conexant HD CX20672-21Z Audio Driver with Version 8.54.37.0,A03 Last Updated 12/20/2013 I need to edit and create a video by this weekend and this is the only tool I know how to use,

    Read the article

  • Gre Tunnel Cisco Linux traffic forwarding

    - by mezgani
    I setup a gre tunnel a cisco router and a Linux machine, the tunnel interface in the Linux box named pic. Well i have to forward traffic coming from cisco through the Linux box. the rules i've set in the Linux box is described as follow: echo "1" /proc/sys/net/ipv4/ip_forward iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -j ACCEPT iptables -A FORWARD -i pic -o ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i ppp0 -o pic -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE I see the traffic coming from tunnel and forwarded to internet but no reply from sent packet. May i miss something like a routing rule.

    Read the article

  • What is a reasonable range for signal strength when next to my router?

    - by Jeff
    I know that these things depend largely on specific hardware but I don't even know if I am in the neighborhood. What would a reasonable range of signal strength be when my device is less than 5 feet from my router? House3 is my main router at 61% strength and that seems very low! Repeater is my... repeater which is 50' away in the next room. I'm not terribly concerned with the Repeater until I get my main router settled.

    Read the article

  • Ubuntu hardy to intrepid upgrade hung on starting bluetooth

    - by srboisvert
    I have no bluetooth. Preliminary googling indicates that is probably an issue with some usb devices. I had an external drive, a mouse and a network dongle attached. It is just stalled during the Installing the Upgrades phase - the last commands were "Creating device nodes" Cancel will leave the system in a broken state. What next?

    Read the article

  • Bonjour/mDNS Broadcast across subnets

    - by Matthew Savage
    I have just setup a new OSX Server in our office and verified that everything is working fine over our wired network (192.168.126.0/24). The problem that I am having is that our clients (Mac Laptops) are mainly connected via Wireless, which are running on a different subnet (192.168.1.0/24), and the mDNS Broadcast isn't reaching this subnet. The network configuration is somewhat foreign to myself (I don't manage the network in this location, but as of just recently the servers), however I don't believe there is any firewalls or routing rules between the two subnets which might cause the traffic to be rejected. I'm wondering if this is simply the mDNS broadcast not able to broadcast over the two different subnets (I'm still reading up on broadcast to understand it more) or there is something else which I might be able to try.

    Read the article

  • SSD redundancy via HDD

    - by Mascarpone
    Is there a way to guarantee redundancy to an SSD using an HDD? Raid 1 is the best choice to guarantee redundancy in HDDs, but SSDs are too expensive to guarantee redundancy via RAID. If I was to couple an SSD with an HDD, could I guarantee redundancy using the HDD as a failover device, and lazily mirroring the data on the HDD? (e.g.: every 5 minutes the data should be synchronized, rather than in real time like with Raid 1).

    Read the article

  • Is post-sudden-power-loss filesystem corruption on an SSD drive's ext3 partition "expected behavior"?

    - by Jeremy Friesner
    My company makes an embedded Debian Linux device that boots from an ext3 partition on an internal SSD drive. Because the device is an embedded "black box", it is usually shut down the rude way, by simply cutting power to the device via an external switch. This is normally okay, as ext3's journalling keeps things in order, so other than the occasional loss of part of a log file, things keep chugging along fine. However, we've recently seen a number of units where after a number of hard-power-cycles the ext3 partition starts to develop structural issues -- in particular, we run e2fsck on the ext3 partition and it finds a number of issues like those shown in the output listing at the bottom of this Question. Running e2fsck until it stops reporting errors (or reformatting the partition) clears the issues. My question is... what are the implications of seeing problems like this on an ext3/SSD system that has been subjected to lots of sudden/unexpected shutdowns? My feeling is that this might be a sign of a software or hardware problem in our system, since my understanding is that (barring a bug or hardware problem) ext3's journalling feature is supposed to prevent these sorts of filesystem-integrity errors. (Note: I understand that user-data is not journalled and so munged/missing/truncated user-files can happen; I'm specifically talking here about filesystem-metadata errors like those shown below) My co-worker, on the other hand, says that this is known/expected behavior because SSD controllers sometimes re-order write commands and that can cause the ext3 journal to get confused. In particular, he believes that even given normally functioning hardware and bug-free software, the ext3 journal only makes filesystem corruption less likely, not impossible, so we should not be surprised to see problems like this from time to time. Which of us is right? Embedded-PC-failsafe:~# ls Embedded-PC-failsafe:~# umount /mnt/unionfs Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Invalid inode number for '.' in directory inode 46948. Fix<y>? yes Directory inode 46948, block 0, offset 12: directory corrupted Salvage<y>? yes Entry 'status_2012-11-26_14h13m41.csv' in /var/log/status_logs (46956) has deleted/unused inode 47075. Clear<y>? yes Entry 'status_2012-11-26_10h42m58.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47076. Clear<y>? yes Entry 'status_2012-11-26_11h29m41.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47080. Clear<y>? yes Entry 'status_2012-11-26_11h42m13.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47081. Clear<y>? yes Entry 'status_2012-11-26_12h07m17.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47083. Clear<y>? yes Entry 'status_2012-11-26_12h14m53.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47085. Clear<y>? yes Entry 'status_2012-11-26_15h06m49.csv' in /var/log/status_logs (46956) has deleted/unused inode 47088. Clear<y>? yes Entry 'status_2012-11-20_14h50m09.csv' in /var/log/status_logs (46956) has deleted/unused inode 47073. Clear<y>? yes Entry 'status_2012-11-20_14h55m32.csv' in /var/log/status_logs (46956) has deleted/unused inode 47074. Clear<y>? yes Entry 'status_2012-11-26_11h04m36.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47078. Clear<y>? yes Entry 'status_2012-11-26_11h54m45.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47082. Clear<y>? yes Entry 'status_2012-11-26_12h12m20.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47084. Clear<y>? yes Entry 'status_2012-11-26_12h33m52.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47086. Clear<y>? yes Entry 'status_2012-11-26_10h51m59.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47077. Clear<y>? yes Entry 'status_2012-11-26_11h17m09.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47079. Clear<y>? yes Entry 'status_2012-11-26_12h54m11.csv.gz' in /var/log/status_logs (46956) has deleted/unused inode 47087. Clear<y>? yes Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Couldn't fix parent of inode 46948: Couldn't find parent directory entry Pass 4: Checking reference counts Unattached inode 46945 Connect to /lost+found<y>? yes Inode 46945 ref count is 2, should be 1. Fix<y>? yes Inode 46953 ref count is 5, should be 4. Fix<y>? yes Pass 5: Checking group summary information Block bitmap differences: -(208264--208266) -(210062--210068) -(211343--211491) -(213241--213250) -(213344--213393) -213397 -(213457--213463) -(213516--213521) -(213628--213655) -(213683--213688) -(213709--213728) -(215265--215300) -(215346--215365) -(221541--221551) -(221696--221704) -227517 Fix<y>? yes Free blocks count wrong for group #6 (17247, counted=17611). Fix<y>? yes Free blocks count wrong (161691, counted=162055). Fix<y>? yes Inode bitmap differences: +(47089--47090) +47093 +47095 +(47097--47099) +(47101--47104) -(47219--47220) -47222 -47224 -47228 -47231 -(47347--47348) -47350 -47352 -47356 -47359 -(47457--47488) -47985 -47996 -(47999--48000) -48017 -(48027--48028) -(48030--48032) -48049 -(48059--48060) -(48062--48064) -48081 -(48091--48092) -(48094--48096) Fix<y>? yes Free inodes count wrong for group #6 (7608, counted=7624). Fix<y>? yes Free inodes count wrong (61919, counted=61935). Fix<y>? yes embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: ********** WARNING: Filesystem still has errors ********** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite contains a file system with errors, check forced. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Directory entry for '.' in ... (46948) is big. Split<y>? yes Missing '..' in directory inode 46948. Fix<y>? yes Setting filetype for entry '..' in ... (46948) to 2. Pass 3: Checking directory connectivity '..' in /etc/network/run (46948) is <The NULL inode> (0), should be /etc/network (46953). Fix<y>? yes Pass 4: Checking reference counts Inode 2 ref count is 12, should be 13. Fix<y>? yes Pass 5: Checking group summary information embeddedrootwrite: ***** FILE SYSTEM WAS MODIFIED ***** embeddedrootwrite: 657/62592 files (24.4% non-contiguous), 87882/249937 blocks Embedded-PC-failsafe:~# Embedded-PC-failsafe:~# e2fsck /dev/sda3 e2fsck 1.41.3 (12-Oct-2008) embeddedrootwrite: clean, 657/62592 files, 87882/249937 blocks

    Read the article

  • How to identify specific chipset driver on client to add to WDS driver database?

    - by Sandy
    I have two new models to support, Optiplex 790 and Lenovo L520. I need to add their chipset drivers to the Windows Deployment server and Intel's driver package is a suite of chipset drivers. WDS discovers way too many: Prior to installing the chipset, SM_Bus shows a yellow exclamation in the Device Manager. When I install Intel's suite, the drivers are installed and SM_Bus is gone. How can I identify which drivers are being used?

    Read the article

< Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >