Search Results

Search found 37647 results on 1506 pages for 'sql performance'.

Page 286/1506 | < Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >

• OpenGL : sluggish performance in extracting texture from GPU

  - by Cyan

  I'm currently working on an algorithm which creates a texture within a render buffer. The operations are pretty complex, but for the GPU this is a simple task, done very quickly. The problem is that, after creating the texture, i would like to save it. This requires to extract it from GPU memory. For this operation, i'm using glGetTexImage(). It works, but the performance is sluggish. No, i mean even slower than that. For example, an 8MB texture (uncompressed) requires 3 seconds (yes, seconds) to be extracted. That's mind puzzling. I'm almost wondering if my graphic card is connected by a serial link... Well, anyway, i've looked around, and found some people complaining about the same, but no working solution so far. The most promising advise was to "extract data in the native format of the GPU". Which i've tried and tried, but failed so far. Edit : by moving the call to glGetTexImage() in a different place, the speed has been a bit improved for the most dramatic samples : looking again at the 8MB texture, it knows requires 500ms, instead of 3sec. It's better, but still much too slow. Smaller texture sizes were not affected by the change (typical timing remained into the 60-80ms range). Using glFinish() didn't help either. Note that, if i call glFinish() (without glGetTexImage), i'm getting a fixed 16ms result, whatever the texture size or complexity. It really looks like the timing for a frame at 60fps. The timing is measured for the full rendering + saving sequence. The call to glGetTexImage() alone does not really matter. That being said, it is this call which changes the performance. And yes, of course, as stated at the beginning, the texture is "created into the GPU", hence the need to save it.

  Read the article

• SQL error - Cannot convert nvarchar to decimal

  - by jakesankey

  I have a C# application that simply parses all of the txt documents within a given network directory and imports the data to a SQL server db. Everything was cruising along just fine until about the 1800th file when it happend to have a few blanks in columns that are called out as DBType.Decimal (and the value is usually zero in the files, not blank). So I got this error, "cannot convert nvarchar to decimal". I am wondering how I could tell the app to simply skip the lines that have this issue?? Perhaps I could even just change the column type to varchar even tho values are numbers (what problems could this create?) Thanks for any help! using System; using System.Data; using System.Data.SQLite; using System.IO; using System.Text.RegularExpressions; using System.Threading; using System.Collections.Generic; using System.Linq; using System.Data.SqlClient; namespace JohnDeereCMMDataParser { internal class Program { public static List<string> GetImportedFileList() { List<string> ImportedFiles = new List<string>(); using (SqlConnection connect = new SqlConnection(@"Server=FRXSQLDEV;Database=RX_CMMData;Integrated Security=YES")) { connect.Open(); using (SqlCommand fmd = connect.CreateCommand()) { fmd.CommandText = @"SELECT FileName FROM CMMData;"; fmd.CommandType = CommandType.Text; SqlDataReader r = fmd.ExecuteReader(); while (r.Read()) { ImportedFiles.Add(Convert.ToString(r["FileName"])); } } } return ImportedFiles; } private static void Main(string[] args) { Console.Title = "John Deere CMM Data Parser"; Console.WriteLine("Preparing CMM Data Parser... done"); Console.WriteLine("Scanning for new CMM data..."); Console.ForegroundColor = ConsoleColor.Gray; using (SqlConnection con = new SqlConnection(@"Server=FRXSQLDEV;Database=RX_CMMData;Integrated Security=YES")) { con.Open(); using (SqlCommand insertCommand = con.CreateCommand()) { Console.WriteLine("Connecting to SQL server..."); SqlCommand cmdd = con.CreateCommand(); string[] files = Directory.GetFiles(@"C:\Documents and Settings\js91162\Desktop\CMM WENZEL\", "*_*_*.txt", SearchOption.AllDirectories); List<string> ImportedFiles = GetImportedFileList(); insertCommand.Parameters.Add(new SqlParameter("@FeatType", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@FeatName", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@Axis", DbType.String)); insertCommand.Parameters.Add(new SqlParameter("@Actual", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@Nominal", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@Dev", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@TolMin", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@TolPlus", DbType.Decimal)); insertCommand.Parameters.Add(new SqlParameter("@OutOfTol", DbType.Decimal)); foreach (string file in files.Except(ImportedFiles)) { var FileNameExt1 = Path.GetFileName(file); cmdd.Parameters.Clear(); cmdd.Parameters.Add(new SqlParameter("@FileExt", FileNameExt1)); cmdd.CommandText = @" IF (EXISTS (SELECT * FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_SCHEMA = 'RX_CMMData' AND TABLE_NAME = 'CMMData')) BEGIN SELECT COUNT(*) FROM CMMData WHERE FileName = @FileExt; END"; int count = Convert.ToInt32(cmdd.ExecuteScalar()); con.Close(); con.Open(); if (count == 0) { Console.WriteLine("Preparing to parse CMM data for SQL import..."); if (file.Count(c => c == '_') > 5) continue; insertCommand.CommandText = @" INSERT INTO CMMData (FeatType, FeatName, Axis, Actual, Nominal, Dev, TolMin, TolPlus, OutOfTol, PartNumber, CMMNumber, Date, FileName) VALUES (@FeatType, @FeatName, @Axis, @Actual, @Nominal, @Dev, @TolMin, @TolPlus, @OutOfTol, @PartNumber, @CMMNumber, @Date, @FileName);"; string FileNameExt = Path.GetFullPath(file); string RNumber = Path.GetFileNameWithoutExtension(file); int index2 = RNumber.IndexOf("~"); Match RNumberE = Regex.Match(RNumber, @"^(R|L)\d{6}(COMP|CRIT|TEST|SU[1-9])(?=_)", RegexOptions.IgnoreCase); Match RNumberD = Regex.Match(RNumber, @"(?<=_)\d{3}[A-Z]\d{4}|\d{3}[A-Z]\d\w\w\d(?=_)", RegexOptions.IgnoreCase); Match RNumberDate = Regex.Match(RNumber, @"(?<=_)\d{8}(?=_)", RegexOptions.IgnoreCase); string RNumE = Convert.ToString(RNumberE); string RNumD = Convert.ToString(RNumberD); if (RNumberD.Value == @"") continue; if (RNumberE.Value == @"") continue; if (RNumberDate.Value == @"") continue; if (index2 != -1) continue; DateTime dateTime = DateTime.ParseExact(RNumberDate.Value, "yyyyMMdd", Thread.CurrentThread.CurrentCulture); string cmmDate = dateTime.ToString("dd-MMM-yyyy"); string[] lines = File.ReadAllLines(file); bool parse = false; foreach (string tmpLine in lines) { string line = tmpLine.Trim(); if (!parse && line.StartsWith("Feat. Type,")) { parse = true; continue; } if (!parse || string.IsNullOrEmpty(line)) { continue; } Console.WriteLine(tmpLine); foreach (SqlParameter parameter in insertCommand.Parameters) { parameter.Value = null; } string[] values = line.Split(new[] { ',' }); for (int i = 0; i < values.Length - 1; i++) { if (i = "" || i = null) continue; SqlParameter param = insertCommand.Parameters[i]; if (param.DbType == DbType.Decimal) { decimal value; param.Value = decimal.TryParse(values[i], out value) ? value : 0; } else { param.Value = values[i]; } } insertCommand.Parameters.Add(new SqlParameter("@PartNumber", RNumE)); insertCommand.Parameters.Add(new SqlParameter("@CMMNumber", RNumD)); insertCommand.Parameters.Add(new SqlParameter("@Date", cmmDate)); insertCommand.Parameters.Add(new SqlParameter("@FileName", FileNameExt)); insertCommand.ExecuteNonQuery(); insertCommand.Parameters.RemoveAt("@PartNumber"); insertCommand.Parameters.RemoveAt("@CMMNumber"); insertCommand.Parameters.RemoveAt("@Date"); insertCommand.Parameters.RemoveAt("@FileName"); } } } Console.WriteLine("CMM data successfully imported to SQL database..."); } con.Close(); } } } }

  Read the article

• Migrating SQL Server Databases – The DBA’s Checklist (Part 3)

  - by Sadequl Hussain

  Continuing from Part 2 of the Database Migration Checklist series: Step 10: Full-text catalogs and full-text indexing This is one area of SQL Server where people do not seem to take notice unless something goes wrong. Full-text functionality is a specialised area in database application development and is not usually implemented in your everyday OLTP systems. Nevertheless, if you are migrating a database that uses full-text indexing on one or more tables, you need to be aware a few points. First of all, SQL Server 2005 now allows full-text catalog files to be restored or attached along with the rest of the database. However, after migration, if you are unable to look at the properties of any full-text catalogs, you are probably better off dropping and recreating it. You may also get the following error messages along the way: Msg 9954, Level 16, State 2, Line 1 The Full-Text Service (msftesql) is disabled. The system administrator must enable this service. This basically means full text service is not running (disabled or stopped) in the destination instance. You will need to start it from the Configuration Manager. Similarly, if you get the following message, you will also need to drop and recreate the catalog and populate it. Msg 7624, Level 16, State 1, Line 1 Full-text catalog ‘catalog_name‘ is in an unusable state. Drop and re-create this full-text catalog. A full population of full-text indexes can be a time and resource intensive operation. Obviously you will want to schedule it for low usage hours if the database is restored in an existing production server. Also, bear in mind that any scheduled job that existed in the source server for populating the full text catalog (e.g. nightly process for incremental update) will need to be re-created in the destination. Step 11: Database collation considerations Another sticky area to consider during a migration is the collation setting. Ideally you would want to restore or attach the database in a SQL Server instance with the same collation. Although not used commonly, SQL Server allows you to change a database’s collation by using the ALTER DATABASE command: ALTER DATABASE database_name COLLATE collation_name You should not be using this command for no reason as it can get really dangerous.  When you change the database collation, it does not change the collation of the existing user table columns.  However the columns of every new table, every new UDT and subsequently created variables or parameters in code will use the new setting. The collation of every char, nchar, varchar, nvarchar, text or ntext field of the system tables will also be changed. Stored procedure and function parameters will be changed to the new collation and finally, every character-based system data type and user defined data types will also be affected. And the change may not be successful either if there are dependent objects involved. You may get one or multiple messages like the following: Cannot ALTER ‘object_name‘ because it is being referenced by object ‘dependent_object_name‘. That is why it is important to test and check for collation related issues. Collation also affects queries that use comparisons of character-based data.  If errors arise due to two sides of a comparison being in different collation orders, the COLLATE keyword can be used to cast one side to the same collation as the other. Continues…

  Read the article

• Configuration "diff" across Oracle WebCenter Sites instances

  - by Mark Fincham-Oracle

  Problem Statement With many Oracle WebCenter Sites environments - how do you know if the various configuration assets and settings are in sync across all of those environments? Background At Oracle we typically have a "W" shaped set of environments.  For the "Production" environments we typically have a disaster recovery clone as well and sometimes additional QA environments alongside the production management environment. In the case of www.java.com we have 10 different environments. All configuration assets/settings (CSElements, Templates, Start Menus etc..) start life on the Development Management environment and are then published downstream to other environments as part of the software development lifecycle. Ensuring that each of these 10 environments has the same set of Templates, CSElements, StartMenus, TreeTabs etc.. is impossible to do efficiently without automation. Solution Summary  The solution comprises of two components. A JSON data feed from each environment. A simple HTML page that consumes these JSON data feeds.  Data Feed: Create a JSON WebService on each environment. The WebService is no more than a SiteEntry + CSElement. The CSElement queries various DB tables to obtain details of the assets/settings returning this data in a JSON feed. Report: Create a simple HTML page that uses JQuery to fetch the JSON feed from each environment and display the results in a table. Since all assets (CSElements, Templates etc..) are published between environments they will have the same last modified date. If the last modified date of an asset is different in the JSON feed or is mising from an environment entirely then highlight that in the report table. Example Solution Details Step 1: Create a Site Entry + CSElement that outputs JSON Site Entry & CSElement Setup  The SiteEntry should be uncached so that the most recent configuration information is returned at all times. In the CSElement set the contenttype accordingly: Step 2: Write the CSElement Logic The basic logic, that we repeat for each asset or setting that we are interested in, is to query the DB using <ics:sql> and then loop over the resultset with <ics:listloop>. For example: <ics:sql sql="SELECT name,updateddate FROM Template WHERE status != 'VO'" listname="TemplateList" table="Template" /> "templates": [ <ics:listloop listname="TemplateList"> {"name":"<ics:listget listname="TemplateList"  fieldname="name"/>", "modified":"<ics:listget listname="TemplateList"  fieldname="updateddate"/>"}, </ics:listloop> ], A comprehensive list of SQL queries to fetch each configuration asset/settings can be seen in the appendix at the end of this article. For the generation of the JSON data structure you could use Jettison (the library ships with the 11.1.1.8 version of the product), native Java 7 capabilities or (as the above example demonstrates) you could roll-your-own JSON output but that is not advised. Step 3: Create an HTML Report The JavaScript logic looks something like this.. 1) Create a list of JSON feeds to fetch: ENVS['dev-mgmngt'] = 'http://dev-mngmnt.example.com/sites/ContentServer?d=&pagename=settings.json'; ENVS['dev-dlvry'] = 'http://dev-dlvry.example.com/sites/ContentServer?d=&pagename=settings.json';  ENVS['test-mngmnt'] = 'http://test-mngmnt.example.com/sites/ContentServer?d=&pagename=settings.json';  ENVS['test-dlvry'] = 'http://test-dlvry.example.com/sites/ContentServer?d=&pagename=settings.json';   2) Create a function to get the JSON feeds: function getDataForEnvironment(url){ return $.ajax({ type: 'GET', url: url, dataType: 'jsonp', beforeSend: function (jqXHR, settings){ jqXHR.originalEnv = env; jqXHR.originalUrl = url; }, success: function(json, status, jqXHR) { console.log('....success fetching: ' + jqXHR.originalUrl); // store the returned data in ALLDATA ALLDATA[jqXHR.originalEnv] = json; }, error: function(jqXHR, status, e) { console.log('....ERROR: Failed to get data from [' + url + '] ' + status + ' ' + e); } }); } 3) Fetch each JSON feed: for (var env in ENVS) { console.log('Fetching data for env [' + env +'].'); var promisedData = getDataForEnvironment(ENVS[env]); promisedData.success(function (data) {}); }  4) For each configuration asset or setting create a table in the report For example, CSElements: 1) Get a list of unique CSElement names from all of the returned JSON data. 2) For each unique CSElement name, create a row in the table  3) Select 1 environment to represent the master or ideal state (e.g. "Everything should be like Production Delivery") 4) For each environment, compare the last modified date of this envs CSElement to the master. Highlight any differences in last modified date or missing CSElements. 5) Repeat...    Appendix This section contains various SQL statements that can be used to retrieve configuration settings from the DB.  Templates  <ics:sql sql="SELECT name,updateddate FROM Template WHERE status != 'VO'" listname="TemplateList" table="Template" /> CSElements <ics:sql sql="SELECT name,updateddate FROM CSElement WHERE status != 'VO'" listname="CSEList" table="CSElement" /> Start Menus <ics:sql sql="select sm.id, sm.cs_name, sm.cs_description, sm.cs_assettype, sm.cs_assetsubtype, sm.cs_itemtype, smr.cs_rolename, p.name from StartMenu sm, StartMenu_Sites sms, StartMenu_Roles smr, Publication p where sm.id=sms.ownerid and sm.id=smr.cs_ownerid and sms.pubid=p.id order by sm.id" listname="startList" table="Publication,StartMenu,StartMenu_Roles,StartMenu_Sites"/>  Publishing Configurations <ics:sql sql="select id, name, description, type, dest, factors from PubTarget" listname="pubTargetList" table="PubTarget" /> Tree Tabs <ics:sql sql="select tt.id, tt.title, tt.tooltip, p.name as pubname, ttr.cs_rolename, ttsect.name as sectname from TreeTabs tt, TreeTabs_Roles ttr, TreeTabs_Sect ttsect,TreeTabs_Sites ttsites LEFT JOIN Publication p  on p.id=ttsites.pubid where p.id is not null and tt.id=ttsites.ownerid and ttsites.pubid=p.id and tt.id=ttr.cs_ownerid and tt.id=ttsect.ownerid order by tt.id" listname="treeTabList" table="TreeTabs,TreeTabs_Roles,TreeTabs_Sect,TreeTabs_Sites,Publication" />  Filters <ics:sql sql="select name,description,classname from Filters" listname="filtersList" table="Filters" /> Attribute Types <ics:sql sql="select id,valuetype,name,updateddate from AttrTypes where status != 'VO'" listname="AttrList" table="AttrTypes" /> WebReference Patterns <ics:sql sql="select id,webroot,pattern,assettype,name,params,publication from WebReferencesPatterns" listname="WebRefList" table="WebReferencesPatterns" /> Device Groups <ics:sql sql="select id,devicegroupsuffix,updateddate,name from DeviceGroup" listname="DeviceList" table="DeviceGroup" /> Site Entries <ics:sql sql="select se.id,se.name,se.pagename,se.cselement_id,se.updateddate,cse.rootelement from SiteEntry se LEFT JOIN CSElement cse on cse.id = se.cselement_id where se.status != 'VO'" listname="SiteList" table="SiteEntry,CSElement" /> Webroots <ics:sql sql="select id,name,rooturl,updatedby,updateddate from WebRoot" listname="webrootList" table="WebRoot" /> Page Definitions <ics:sql sql="select pd.id, pd.name, pd.updatedby, pd.updateddate, pd.description, pdt.attributeid, pa.name as nameattr, pdt.requiredflag, pdt.ordinal from PageDefinition pd, PageDefinition_TAttr pdt, PageAttribute pa where pd.status != 'VO' and pa.id=pdt.attributeid and pdt.ownerid=pd.id order by pd.id,pdt.ordinal" listname="pageDefList" table="PageDefinition,PageAttribute,PageDefinition_TAttr" /> FW_Application <ics:sql sql="select id,name,updateddate from FW_Application where status != 'VO'" listname="FWList" table="FW_Application" /> Custom Elements <ics:sql sql="select elementname from ElementCatalog where elementname like 'CustomElements%'" listname="elementList" table="ElementCatalog" />

  Read the article

• Checking who is connected to your server, with PowerShell.

  - by Fatherjack

  There are many occasions when, as a DBA, you want to see who is connected to your SQL Server, along with how they are connecting and what sort of activities they are carrying out. I’m going to look at a couple of ways of getting this information and compare the effort required and the results achieved of each. SQL Server comes with a couple of stored procedures to help with this sort of task – sp_who and its undocumented counterpart sp_who2. There is also the pumped up version of these called sp_whoisactive, written by Adam Machanic which does way more than these procedures. I wholly recommend you try it out if you don’t already know how it works. When it comes to serious interrogation of your SQL Server activity then it is absolutely indispensable. Anyway, back to the point of this blog, we are going to look at getting the information from sp_who2 for a remote server. I wrote this Powershell script a week or so ago and was quietly happy with it for a while. I’m relatively new to Powershell so forgive both my rather low threshold for entertainment and the fact that something so simple is a moderate achievement for me. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server # connection and query stuff         $ConnectionStr = "Server=$Server;Database=Master;Integrated Security=True" $Query = "EXEC sp_who2" $Connection = new-object system.Data.SQLClient.SQLConnection $Table = new-object "System.Data.DataTable" $Connection.connectionstring = $ConnectionStr try{ $Connection.open() $Command = $Connection.CreateCommand() $Command.commandtext = $Query $result = $Command.ExecuteReader() $Table.Load($result) } catch{ # Show error $error[0] | format-list -Force } $Title = "Data access processes (" + $Table.Rows.Count + ")" $Table | Out-GridView -Title $Title $Connection.close() So this is pretty straightforward, create an SMO object that represents our chosen server, define a connection to the database and a table object for the results when we get them, execute our query over the connection, load the results into our table object and then, if everything is error free display these results to the PowerShell grid viewer. The query simply gets the results of ‘EXEC sp_who2′ for us. Depending on how many connections there are will influence how long the query runs. The grid viewer lets me sort and search the results so it can be a pretty handy way to locate troublesome connections. Like I say, I was quite pleased with this, it seems a pretty simple script and was working well for me, I have added a few parameters to control the output and give me more specific details but then I see a script that uses the $SMOServer object itself to provide the process information and saves having to define the connection object and query specifications. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server $Processes = $SMOServer.EnumProcesses() $Title = "SMO processes (" + $Processes.Rows.Count + ")" $Processes | Out-GridView -Title $Title Create the SMO object of our server and then call the EnumProcesses method to get all the process information from the server. Staggeringly simple! The results are a little different though. Some columns are the same and we can see the same basic information so my first thought was to which runs faster – so that I can get my results more quickly and also so that I place less stress on my server(s). PowerShell comes with a great way of testing this – the Measure-Command function. All you have to do is wrap your piece of code in Measure-Command {[your code here]} and it will spit out the time taken to execute the code. So, I placed both of the above methods of getting SQL Server process connections in two Measure-Command wrappers and pressed F5! The Powershell console goes blank for a while as the code is executed internally when Measure-Command is used but the grid viewer windows appear and the console shows this. You can take the output from Measure-Command and format it for easier reading but in a simple comparison like this we can simply cross refer the TotalMilliseconds values from the two result sets to see how the two methods performed. The query execution method (running EXEC sp_who2 ) is the first set of timings and the SMO EnumProcesses is the second. I have run these on a variety of servers and while the results vary from execution to execution I have never seen the SMO version slower than the other. The difference has varied and the time for both has ranged from sub-second as we see above to almost 5 seconds on other systems. This difference, I would suggest is partly due to the cost overhead of having to construct the data connection and so on where as the SMO EnumProcesses method has the connection to the server already in place and just needs to call back the process information. There is also the difference in the data sets to consider. Let’s take a look at what we get and where the two methods differ Query execution method (sp_who2) SMO EnumProcesses Description - Urn What looks like an XML or JSON representation of the server name and the process ID SPID Spid The process ID Status Status The status of the process Login Login The login name of the user executing the command HostName Host The name of the computer where the  process originated BlkBy BlockingSpid The SPID of a process that is blocking this one DBName Database The database that this process is connected to Command Command The type of command that is executing CPUTime Cpu The CPU activity related to this process DiskIO - The Disk IO activity related to this process LastBatch - The time the last batch was executed from this process. ProgramName Program The application that is facilitating the process connection to the SQL Server. SPID1 - In my experience this is always the same value as SPID. REQUESTID - In my experience this is always 0 - Name In my experience this is always the same value as SPID and so could be seen as analogous to SPID1 from sp_who2 - MemUsage An indication of the memory used by this process but I don’t know what it is measured in (bytes, Kb, Mb…) - IsSystem True or False depending on whether the process is internal to the SQL Server instance or has been created by an external connection requesting data. - ExecutionContextID In my experience this is always 0 so could be analogous to REQUESTID from sp_who2. Please note, these are my own very brief descriptions of these columns, detail can be found from MSDN for columns in the sp_who results here http://msdn.microsoft.com/en-GB/library/ms174313.aspx. Where the columns are common then I would use that description, in other cases then the information returned is purely for interpretation by the reader. Rather annoyingly both result sets have useful information that the other doesn’t. sp_who2 returns Disk IO and LastBatch information which is really useful but the SMO processes method give you IsSystem and MemUsage which have their place in fault diagnosis methods too. So which is better? On reflection I think I prefer to use the sp_who2 method primarily but knowing that the SMO Enumprocesses method is there when I need it is really useful and I’m sure I’ll use it regularly. I’m OK with the fact that it is the slower method because Measure-Command has shown me how close it is to the other option and that it really isn’t a large enough margin to matter.

  Read the article

• VBA - Access 03 - Iterating through a list box, with an if statement to evaluate

  - by Justin

  So I have a one list box with values like DeptA, DeptB, DeptC & DeptD. I have a method that causes these to automatically populate in this list box if they are applicable. So in other words, if they populate in this list box, I want the resulting logic to say they are "Yes" in a boolean field in the table. So to accomplish this I am trying to use this example of iteration to cycle through the list box first of all, and it works great: dim i as integer dim myval as string For i = o to me.lstResults.listcount - 1 myVal = lstResults.itemdata(i) Next i if i debug.print myval, i get the list of data items that i want from the list box. so now i am trying to evaluate that list so that I can have an UPDATE SQL statement to update the table as i need it to be done. so, i know this is a mistake, but this is what i tried to do (giving it as an example so that you can see what i am trying to get to here) dim sql as string dim i as integer dim myval as string dim db as database sql = "UPDATE tblMain SET " for i = 0 to me.lstResults.listcount - 1 myval = lstResults.itemdata(i) If MyVal = "DeptA" Then sql = sql & "DeptA = Yes" ElseIF myval = "DeptB" Then sql = sql & "DeptB = Yes" ElseIf MyVal = "DeptC" Then sql = sql & "DeptC = Yes" ElseIf MyVal = "DeptD" Then sql = sql & "DeptD = Yes" End If Next i debug.print (sql) sql = sql & ";" set db= currentdb db.execute(sql) msgbox "Good Luck!" So you can see why this is going to cause problems because the listbox that these values (DeptA, DeptB, etc) automatically populate in are dynamic....there is rarely one value in the listbox, and the list of values changes per OrderID (what the form I am using this on populates information for in the first place; unique instance). I am looking for something that will evaluate this list one at a time (i.e. iterate through the list of values, and look for "DeptA", and if it is found add yes to the SQL string, and if it not add no to the SQL string, then march on to the next iteration). Even though the listbox populates values dynamically, they are set values, meaning i know what could end up in it. Thanks for any help, Justin

  Read the article

• Unable to connect SQL Server instance from Visual Studio 2008 Version 9.0

  - by salvationishere

  I am getting the below error from VS on an 32-bit XP Professional server even though I set Tools-Options-Database Tools-Data Connections to "SIDEKICK", which is the name of my computer. In other words SIDEKICK should default to the full SQLSERVER. In other words, I want VS to use SQLSERVER instead of SQLSERVER EXPRESS. And I can clearly see my database both from VS in the Server Explorer and also in SSMS 2008. Furthermore, I can view the tables of this database in Server Explorer from VS. I do not get any build errors. And it looks like all of the naming is consistent in my web.config file. I am developing my website according to a Microsoft tutorial, so I should not be getting an error. Yet I get the following exception when I run this code below: CreateAccounts.aspx.cs file protected void CreateAccountButton_Click(object sender, EventArgs e) { MembershipCreateStatus createStatus; //This line below is where the exception occurs MembershipUser newUser = Membership.CreateUser(Username.Text, Password.Text, Email.Text, passwordQuestion, SecurityAnswer.Text, true, out createStatus); And here is what the exception looks like: System.Web.HttpException was unhandled by user code Message="Unable to connect to SQL Server database." Source="System.Web" ErrorCode=-2147467259 StackTrace: at System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) at System.Web.DataAccess.SqlConnectionHelper.EnsureSqlExpressDBFile(String connectionString) at System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) at System.Web.Security.SqlMembershipProvider.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) at System.Web.Security.Membership.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) at System.Web.Security.Membership.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, MembershipCreateStatus& status) at Membership_CreatingUserAccounts.CreateAccountButton_Click(Object sender, EventArgs e) in c:\Documents and Settings\Admin\My Documents\Visual Studio 2008\WebSites\WebSite2\Membership\CreatingUserAccounts.aspx.cs:line 24 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) InnerException: System.Web.HttpException Message="Unable to connect to SQL Server database." Source="System.Web" ErrorCode=-2147467259 StackTrace: at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) at System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install) at System.Web.Management.SqlServices.Install(String database, String dbFileName, String connectionString) at System.Web.DataAccess.SqlConnectionHelper.CreateMdfFile(String fullFileName, String dataDir, String connectionString) InnerException: System.Data.SqlClient.SqlException Message="The user instance login flag is not supported on this version of SQL Server. The connection will be closed." Source=".Net SqlClient Data Provider" ErrorCode=-2146232060 Class=14 LineNumber=65536 Number=18493 Procedure="" Server="." State=1 StackTrace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) InnerException: The web.config connection string looks like: <connectionStrings> <add name="SecurityTutorialsConnectionString" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|SecurityTutorialsDatabase3.mdf;User Instance=true" providerName="System.Data.SqlClient"/> </connectionStrings> <system.web> <membership defaultProvider="SecurityTutorialsSqlMembershipProvider"> <providers> <add name="SecurityTutorialsSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="SecurityTutorialsConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="SecurityTutorials" requiresUniqueEmail="true" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership>

  Read the article

• Right code to retrieve data from sql server database

  - by HasanGursoy

  Hi, I have some problems in database connection and wonder if I have something wrong in my code. Please review. This question is related: Switch between databases, use two databases simultaneously question. cs="Data Source=mywebsite.com;Initial Catalog=database;User Id=root;Password=toor;Connect Timeout=10;Pooling='true';" using (SqlConnection cnn = new SqlConnection(WebConfigurationManager.ConnectionStrings["cs"].ConnectionString)) { using (SqlCommand cmmnd = new SqlCommand("", cnn)) { try { cnn.Open(); #region Header & Description cmmnd.Parameters.Add("@CatID", SqlDbType.Int).Value = catId; cmmnd.CommandText = "SELECT UpperID, Title, Description FROM Categories WHERE CatID=@CatID;"; string mainCat = String.Empty, rootCat = String.Empty; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { if (rdr.Read()) { mainCat = rdr["Title"].ToString(); upperId = Convert.ToInt32(rdr["UpperID"]); description = rdr["Title"]; } else { Response.Redirect("/", false); } } if (upperId > 0) //If upper category exists add its name { cmmnd.Parameters["@CatID"].Value = upperId; cmmnd.CommandText = "SELECT Title FROM Categories WHERE CatID=@CatID;"; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { if (rdr.Read()) { rootCat = "<a href='x.aspx'>" + rdr["Title"] + "</a> &raquo; "; } } } #endregion #region Sub-Categories if (upperId == 0) //show only at root categories { cmmnd.Parameters["@CatID"].Value = catId; cmmnd.CommandText = "SELECT Count(CatID) FROM Categories WHERE UpperID=@CatID;"; if (Convert.ToInt32(cmmnd.ExecuteScalar()) > 0) { cmmnd.CommandText = "SELECT CatID, Title FROM Categories WHERE UpperID=@CatID ORDER BY Title;"; using (SqlDataReader rdr = cmmnd.ExecuteReader()) { while (rdr.Read()) { subcat.InnerHtml += "<a href='x.aspx'>" + rdr["Title"].ToString().ToLower() + "</a>\n"; description += rdr["Title"] + ", "; } } } } #endregion } catch (Exception ex) { HasanG.LogException(ex, Request.RawUrl, HttpContext.Current); Response.Redirect("/", false); } finally { cnn.Close(); } } } The random errors I'm receiving are: A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Timeout expired. The timeout period elapsed prior to obtaining a connection from the pool. This may have occurred because all pooled connections were in use and max pool size was reached. Cannot open database "db" requested by the login. The login failed. Login failed for user 'root'.

  Read the article

• (SQL) Selecting from a database based on multiple pairs of pairs

  - by Owen Allen

  The problem i've encountered is attempting to select rows from a database where 2 columns in that row align to specific pairs of data. IE selecting rows from data where id = 1 AND type = 'news'. Obviously, if it was 1 simple pair it would be easy, but the issue is we are selecting rows based on 100s of pair of data. I feel as if there must be some way to do this query without looping through the pairs and querying each individually. I'm hoping some SQL stackers can provide guidance. Here's a full code break down: Lets imagine that I have the following dataset where history_id is the primary key. I simplified the structure a bit regarding the dates for ease of reading. table: history history_id id type user_id date 1 1 news 1 5/1 2 1 news 1 5/1 3 1 photo 1 5/2 4 3 news 1 5/3 5 4 news 1 5/3 6 1 news 1 5/4 7 2 photo 1 5/4 8 2 photo 1 5/5 If the user wants to select rows from the database based on a date range we would take a subset of that data. SELECT history_id, id, type, user_id, date FROM history WHERE date BETWEEN '5/3' AND '5/5' Which returns the following dataset history_id id type user_id date 4 3 news 1 5/3 5 4 news 1 5/3 6 1 news 1 5/4 7 2 photo 1 5/4 8 2 photo 1 5/5 Now, using that subset of data I need to determine how many of those entries represent the first entry in the database for each type,id pairing. IE is row 4 the first time in the database that id: 3, type: news appears. So I use a with() min() query. In real code the two lists are programmatically generated from the result sets of our previous query, here I spelled them out for ease of reading. WITH previous AS ( SELECT history_id, id, type FROM history WHERE id IN (1,2,3,4) AND type IN ('news','photo') ) SELECT min(history_id) as history_id, id, type FROM previous GROUP BY id, type Which returns the following data set. history_id id type user_id date 1 1 news 1 5/1 2 1 news 1 5/1 3 1 photo 1 5/2 4 3 news 1 5/3 5 4 news 1 5/3 6 1 news 1 5/4 7 2 photo 1 5/4 8 2 photo 1 5/5 You'll notice it's the entire original dataset, because we are matching id and type individually in lists, rather than as a collective pairs. The result I desire is, but I can't figure out the SQL to get this result. history_id id type user_id date 1 1 news 1 5/1 4 3 news 1 5/3 5 4 news 1 5/3 7 2 photo 1 5/4 Obviously, I could go the route of looping through each pair and querying the database to determine it's first result, but that seems an inefficient solution. I figured one of the SQL gurus on this site might be able to spread some wisdom. In case I'm approaching this situation incorrectly, the gist of the whole routine is that the database stores all creations and edits in the same table. I need to track each users behavior and determine how many entries in the history table are edits or creations over a specific date range. Therefore I select all type:id pairs from the date range based on a user_id, and then for each pairing I determine if the user is responsible for the first that occurs in the database. If first, then creation else edit. Any assistance would be awesome.

  Read the article

• Will TSQL become useless because of new ORMs? [closed]

  - by Saeed Neamati

  By introducing LINQ to SQL, I found myself and my .NET developer colleagues gradually moving from TSQL to C# to create queries on the database. Entity Framework made that shift almost permanent. Now it's nearly 2 years that I use LINQ to SQL and LINQ to Entities and haven't used TSQL that much. Yesterday, a colleague encountered a problem (he had to create a SP) and we went to help him. But we all found that our TSQL knowledge was diminished for sure, and a simple SP that seemed trivial to us 2 or 3 years ago, was a challenge to be solved yesterday. Thus it came to my mind that while TSQL's life is attached to SQL Server, and logically as long as SQL Server lives and doesn't change it's SQL language, TSQL would also live, practically it might die, and soon very few people might know it. Am I right? Do existence of ORMs like Entity Framework threaten TSQL's life and usability?

  Read the article

• SQL Saturday #44 Huntington Beach Recap

  What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach.  It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location.  I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis).  It made me think about this: Price of all those cars: $ 150,000+.  Impacting the ability of people to learn: Priceless.  We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well.  That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• SQL 2005 Transaction Rollback Hung–unresolved deadlock

  - by steveh99999

  Encountered an interesting issue recently with a SQL 2005 sp3 Enterprise Edition system. Every weekend, a full database reindex was being run on this system – normally this took around one and a half hours. Then, one weekend, the job ran for over 17 hours  - and had yet to complete... At this point, DBA cancelled the job. Job status is now cancelled – issue over…   However, cancelling the job had not killed the reindex transaction – DBCC OPENTRAN was still showing the transaction being open. The oldest open transaction in the database was now over 17 hours old.  Consequently, transaction log % used growing dramatically and locks still being held in the database... Further attempts to kill the transaction did nothing. ie we had a transaction which could not be killed. In sysprocesses, it was apparent the SPID was in rollback status, but the spid was not accumulating CPU or IO. Was the SPID stuck ? On examination of the SQL errorlog – shortly after the reindex had started, a whole bunch of deadlock output had been produced by trace flag 1222. Then this :- spid5s      ***Stack Dump being sent to   xxxxxxx\SQLDump0042.txt spid5s      * ******************************************************************************* spid5s      * spid5s      * BEGIN STACK DUMP: spid5s      *   12/05/10 01:04:47 spid 5 spid5s      * spid5s      * Unresolved deadlock spid5s      * spid5s      *   spid5s      * ******************************************************************************* spid5s      * ------------------------------------------------------------------------------- spid5s      * Short Stack Dump spid5s      Stack Signature for the dump is 0x000001D7 spid5s      External dump process return code 0x20000001. Unresolved deadlock – don’t think I’ve ever seen one of these before…. A quick call to Microsoft support confirmed the following bug had been hit :- http://support.microsoft.com/kb/961479 So, only option to get rid of the hung spid – to restart SQL Server… Fortunately SQL Server restarted without any issues. I was pleasantly surprised to see that recovery on this particular database was fast. However, restarting SQL Server to fix an issue is not something I would normally rush to do... Short term fix – the reindex was changed to use MAXDOP of 1. Longer term fix will be to apply the correct CU, or wait for SQL 2005 sp 4 ?? This should be released any day soon I hope..

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 19 (sys.dm_exec_query_stats)

  - by Tamarick Hill

  The sys.dm_exec_query_stats DMV is one of the most useful DMV’s out there when it comes to performance tuning. If you have been keeping up with this blog series this month, you know that I started out on Day 1 reviewing many of the DMV’s within the ‘exec’ namespace. I’m not sure how I missed this one considering how valuable it is, but hey, they say it’s better late than never right?? On Day 7 and Day 8 we reviewed the sys.dm_exec_procedure_stats and sys.dm_exec_trigger_stats respectively. This sys.dm_exec_query_stats DMV is very similar to these two. As a matter of fact, this DMV will return all of the information you saw in the other two DMV’s, but in addition to that, you can see stats for all queries that have cached execution plans on your server. You can even see stats for statements that are ran Ad-Hoc as long as they are still cached in the buffer pool. To better illustrate this DMV, let have a quick look at it: SELECT * FROM sys.dm_exec_query_stats As you can see, there is a lot of information returned from this DMV. I wont go into detail about each and every one of these columns, but I will touch on a few of them briefly. The first column is the ‘sql_handle’, which if you remember from Day 4 of our blog series, I explained how you can use this column to extract the actual SQL text that was executed. The next columns statement_start_offset and statement_end_offset provide you a way of extracting the exact SQL statement that was executed as part of a batch. The plan_handle column is used to extract the Execution plan that was used, which we talked about during Day 5 of this blog series. Later in the result set, you have columns to identify how many times a particular statement was executed, how much CPU time it used, how many reads/writes it performed, the duration, how many rows were returned, etc. These columns provide you with a solid avenue to begin your performance optimization. The last column I will touch on is the query_plan_hash column. A lot of times when you have Dynamic SQL running on your server, you have similar statements with different parameter values being passed in. Many times these types of statements will get similar execution plans and then a Binary hash value can be generated based on these similar plans. This query plan hash can be used to find the cost of all queries that have similar execution plans and then you can tune based on that plan to improve the performance of all of the individual queries. This is a very powerful way of identifying and tuning Ad-hoc statements that run on your server. As I stated earlier, this sys.dm_exec_query_stats DMV is a very powerful and recommended DMV for performance tuning. You are able to quickly identify statements that are running on your server and analyze their impact on system resources. Using this DMV to track down the biggest performance killers on your server will allow you to make the biggest gains once you focus your tuning efforts on those top offenders. For more information about this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms189741.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• Import and Export data from SQL Server 2005 to XL Sheet

  - by SAMIR BHOGAYTA

  For uploading the data from Excel Sheet to SQL Server and viceversa, we need to create a linked server in SQL Server. Expample linked server creation: Before you executing the below command the excel sheet should be created in the specified path and it should contain the name of the columns. EXEC sp_addlinkedserver 'ExcelSource2', 'Jet 4.0', 'Microsoft.Jet.OLEDB.4.0', 'C:\Srinivas\Vdirectory\Testing\Marks.xls', NULL, 'Excel 5.0' Once you executed above query it will crate linked server in SQL Server 2005. The following are the Query from sending the data from Excel sheet to SQL Server 2005. INSERT INTO emp SELECT * from OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:\text.xls','SELECT * FROM [sheet1$]') The following query is for sending the data from SQL Server 2005 to Excel Sheet. insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=c:\text.xls;', 'SELECT * FROM [sheet1$]') select * from emp

  Read the article

• SQL Azure maximum database size rises from 10GB to 50GB in June

  - by Eric Nelson

  At Mix we announced that we will be offering a new 50gb size option in June. If you would like to become an early adopter of this new size option before generally available, send an email to [email protected]  and it will auto-reply with instructions to fill out a survey to nominate your application that requires greater than 10gb of storage. Other announcements included: MARS in April: Execute multiple batches in a single connection Spatial Data in June: Geography and geometry types SQL Azure Labs: SQL Azure Labs provides a place where you can access incubations and early preview bits for products and enhancements to SQL Azure. Currently OData Service for SQL Azure. Related Links: SQL Azure Announcements at MIX http://ukazure.ning.com

  Read the article

• How to clear the resent server name list in SQL Server Management Studio

  - by Pavan Kumar Pabothu

  If you are using SQL Server management Studio much the we can observer that the list of server names in the log in of it. As you can imagin a period of time after 6 month or 1 year you will see a long list of server names in the login dialog. How to clear this list...? I doesn't provide a mechanism to clean nor clear the list, so you'll have to do a little browsing through your file system. For SQl Server 2005 Management Studio, we should delete the below file C:\Documents and Settings\<user>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\Shell\mru.dat. For SQl Server 2008 Management Studio, we should delete the below file C:\Documents and Settings\<user>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\Shell\SQLStudio.bin. After deletion we can re-login the Management studio and can see the empty list.

  Read the article

• A Warning to Those Using sys.dm_exec_query_stats

  - by Adam Machanic

  The sys.dm_exec_query_stats view is one of my favorite DMVs. It has replaced a large chunk of what I used to use SQL Trace for--pulling metrics about what queries are running and how often--and it makes this kind of data collection painless and automatic. What's not to love? But use cases for the view are a topic for another post. Today I want to quickly point out an inconsistency. If you're using this view heavily, as I am, you should know that in some cases your queries will not get a row. One...(read more)

  Read the article

• White Paper on Parallel Processing

  - by Andrew Kelly

    I just ran across what I think is a newly published white paper on parallel  processing in SQL Server 2008 R2. The date is October 2010 but this is the first time I have seen it so I am not 100% sure how new it really is. Maybe you have seen it already but if not I recommend taking a look. So far I haven’t had time to read it extensively but from a cursory look it appears to be quite informative and this is one of the areas least understood by a lot of dba’s. It was authored by Don Pinto...(read more)

  Read the article

• Utility to Script SQL Server Configuration

  - by Bill Graziano

  I wrote a small utility to script some key SQL Server configuration information. I had two goals for this utility: Assist with disaster recovery preparation Identify configuration changes I’ve released the application as open source through CodePlex. You can download it from CodePlex at the Script SQL Server Configuration project page. The application is a .NET 2.0 console application that uses SMO. It writes its output to a directory that you specify.  Disaster Planning ScriptSqlConfig generates scripts for logins, jobs and linked servers.  It writes the properties and configuration from the instance to text files. The scripts are designed so they can be run against a DR server in the case of a disaster. The properties and configuration will need to be manually compared. Each job is scripted to its own file. Each linked server is scripted to its own file. The linked servers don’t include the password if you use a SQL Server account to connect to the linked server. You’ll need to store those somewhere secure. All the logins are scripted to a single file. This file includes windows logins, SQL Server logins and any server role membership.  The SQL Server logins are scripted with the correct SID and hashed passwords. This means that when you create the login it will automatically match up to the users in the database and have the correct password. This is the only script that I programmatically generate rather than using SMO. The SQL Server configuration and properties are scripted to text files. These will need to be manually reviewed in the event of a disaster. Or you could DIFF them with the configuration on the new server. Configuration Changes These scripts and files are all designed to be checked into a version control system.  The scripts themselves don’t include any date specific information. In my environments I run this every night and check in the changes. I call the application once for each server and script each server to its own directory.  The process will delete any existing files before writing new ones. This solved the problem I had where the scripts for deleted jobs and linked servers would continue to show up.  To see any changes I just need to query the version control system to show many any changes to the files. Database Scripting Utilities that script database objects are plentiful.  CodePlex has at least a dozen of them including one I wrote years ago. The code is so easy to write it’s hard not to include that functionality. This functionality wasn’t high on my list because it’s included in a database backup.  Unless you specify the /nodb option, the utility will script out many user database objects. It will script one object per file. It will script tables, stored procedures, user-defined data types, views, triggers, table types and user-defined functions. I know there are more I need to add but haven’t gotten around it yet. If there’s something you need, please log an issue and get it added. Since it scripts one object per file these really aren’t appropriate to recreate an empty database. They are really good for checking into source control every night and then seeing what changed. I know everyone tells me all their database objects are in source control but a little extra insurance never hurts. Conclusion I hope this utility will help a few of you out there. My goal is to have it script all server objects that aren’t contained in user databases. This should help with configuration changes and especially disaster recovery.

  Read the article

• SQL Server MCM Changes and Readiness Videos

  - by Enrique Lima

  Towards the end of 2010, Microsoft made some changes to the Microsoft Certified Master for SQL Server 2008 program. The process to certification required to have a 3 week bootcamp/course in Redmond. This has changed now.  It has been mapped to 2 exams. Get information from Microsoft Learning with regards to the changes, process, resources and pricing for the certification exams.  http://www.microsoft.com/learning/en/us/certification/master-sql-path.aspx What has happened here too, is some SQL MCM rotation Instructors and SQL MCMs  have created materials to prep for those exams.  I see this as a huge benefit for individuals who are planning to take on the MCM, but really it is of huge benefit for all individuals who deal with working around SQL Server on a regular basis. Check the Readiness Videos as a great starting point http://technet.microsoft.com/en-us/sqlserver/ff977043.aspx

  Read the article

• SQL Server Express Profiler

  - by David Turner

  During a recent project, while waiting for our Development Database to be provisioned on the clients corporate SQL Server Environment (these things can sometimes take weeks or months to be setup), we began our initial development against a local instance on SQL Server Express, just as an interim measure until the Development database was live.  This was going just fine, until we found that we needed to do some profiling to understand a problem we were having with the performance of our ORM generated Data Access Layer.  The full version of SQL Server Management Studio includes a profiler, that we could use to help with this kind of problem, however the Express version does not, so I was really pleased to find that there is a freely available Profiler for SQL Server Express imaginatively titled ‘SQL Server Express Profiler’, and it worked great for us.  http://sites.google.com/site/sqlprofiler/

  Read the article

• What are the Crappy Code Games - Who can enter?

  - by simonsabin

  This is part of a series on the Crappy Code Games The background Who can enter? What are the challenges? What are the prizes? Why should I attend? Tips on how to win Who can enter? Anyone can enter the competition, whats more anyone can just come along for the evening. All the evenings are aimed at being a social evening with food and drink. So just think of them as usergroup meetings with The evening will have lots of SQL bods in attendance and I'll be trying to help out anyone that wants some...(read more)

  Read the article

• What are the Crappy Code Games - What are the challenges?

  - by simonsabin

  This is part of a series on the Crappy Code Games The background Who can enter? What are the challenges? What are the prizes? Why should I attend? Tips on how to win What are the challenges? There are 4 games that you can enter. Each one is to test a different aspect of SQL Server. The High Jump: Generate the highest I/O per second The 100 m dash: Cumulative highest number of I/O’s in 60 seconds The SSIS-athon: Load one billion row fact table in the shortest time The Marathon: Generate the highest...(read more)

  Read the article

• Linq to SQL EntitySet Binding the MVVM way

  - by Savvas Sopiadis

  Hi everybody! In a WPF application i'm using LINQ to SQL classes (created by SQL Metal, thus implementing POCOs). Let's assume i have a table User and a Table Pictures. These pictures are actually created from one picture, the difference between them may be the size, coloring,... So every user may has more than one Pictures, so the association is 1:N (User:Pictures). My problems: a) how do i bind, in a MVVM manner, a picture control to one picture (i will take one specific picture) in the EntitySet, to show it up? b) everytime a user changes her picture the whole EntitySet should be thrown away and the newly created Picture(s) should be a added. Is this the correct way? e.g. //create the 1st piture object UserPicture1 = new UserPicture(); UserPicture1.Description = "... some description.. "; USerPicture1.Image = imgBytes; //array of bytes //create the 2nd piture object UserPicture2 = new UserPicture(); UserPicture2.Description = "... another description.. "; UserPicture2.Image = DoSomethingWithPreviousImg(imgBytes); //array of bytes //Assuming that the entityset is called Pictures //add these pictures to the corresponding user User.Pictures.Add(UserPicture1); User.Pictures.Add(UserPicture2); //save changes datacontext.Save() Thanks in advance

  Read the article

• How to populate a generic list of objects in C# from SQL database

  - by developr

  I am just learning ASP.NET c# and trying to incorporate best practices into my applications. Everything that I read says to layer my applications into DAL, BLL, UI, etc based on separation of concerns. Instead of passing datatables around, I am thinking about using custom objects so that I am loosely coupled to my data layer and can take advantage of intellisense in VS. I assume these objects would be considered DTOs? First, where do these objects reside in my layers? BLL, DAL, other? Second, when populating from SQL, should I loop through a data reader to populate the list or first fill a data table, then loop through the table to populate the list? I know you should close the database connection as soon as possible, but it seems like even more overhead to populate the data table and then loop through that for the list. Third, everything I see these days says use Linq2SQL. I am planning to learn Linq2SQL, but at this time I am working with a legacy database that doesn't have foreign keys setup and I do not have the ability to fix it atm. Also, I want to learn more about c# before I start getting into ORM solutions like nHibernate. At the same time I don't want to type out all the connection and SQL plumbing for every query. Is it ok to use the Enterprise DAAB for now?

  Read the article

< Previous Page | 282 283 284 285 286 287 288 289 290 291 292 293  | Next Page >