Search Results

Search found 9276 results on 372 pages for 'chris driver'.

Page 287/372 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

• Windows 7 Audio tracks messed up

  - by Crash893

  I'm not an audio guy so it might not be the most articulate description of the problem I'm having but it seems like ever since I went to Windows 7 some video (netflix and some youtube) the background track (music sound effects etc) plays appropriately but the foreground track (i.e. the actors and/or narrator) barely comes in at all Right now I have just a simple set of PC speakers and some times a pair of headphones that plug into the PC speakers (no fancy 5.1) I've looked at every setting I can think of but I can't find anything that could be causing this Ive uninstalled the driver and reinstalled and I still get the same results so I think its a software issue any ideas?

  Read the article

• Having issues with flickering output to TV from Windows 7 laptop

  - by Nimmy Lebby

  I cannot tell why this is happening. I cannot get a pattern as to when it happens. Sometimes, I watch entire Hulu content without any interruptions. Other times, it happens 2-3 times in a span of 3 minutes. Then it stops for 10-15 minutes. Lenovo T410s Integrated graphics: Intel HD Graphics (Driver=8.15.10.2253, Video BIOS=2026.1) TV is a Zenith (does not happen with other laptop so doubt it's TV) TV connected to laptop using HDMI-to-DVI cable (previously was connected directly via DVI but I bought a new cable and it's still happening) Anyone could help me troubleshoot this? I'd greatly appreciate it. If you need more information, I'll be glad to provide it.

  Read the article

• GeForce 9600GT support for dual monitor setup

  - by Theo

  I have a NVIDIA GeForce 9600 GT (point of view, link) on an Asus M2V-MX motherboard. The card has one DVI, HDMI and S-Video output. The graphics card does not seem to support dual monitors: the driver control panel for the graphics card does not detect a second monitor that is attached via S-Video (which leads me to believe that it doesn't support dual monitors with DVI and the other connections). Would it be possible to use a VGA/DVI splitter to attach two monitors to the single DVI output on the graphics card? Would this allow for a dual monitor setup, or only mirroring? How do I know if the graphic card supports this? With this particular motherboard, would it be possible to use the onboard video for another monitor?

  Read the article

• Linux Ubuntu: Updating the GRUB menu

  - by Mr X

  So apparently there are 2 versions of Linux on my laptop(I have a dual boot system with Linux and Windows 8 but Linux is the master OS). One of them uses the Kernel version 3.11.0 whose headers + source code are incompatible with my wireless driver. My laptop is a Toshiba Satellite with a Realtek RTL8188CE wireless lan.So the newer kernel version is still the first option on the menu and to get to Linux I use the "Previous versions of linux" which is running Kernel version 3.2.0-55. What can I do to update the grub menu so that Linux version with the 3.2.0-55 Kernel appears as the primary option? Do I need to get rid of/uninstall the newer kernel version? How can I do this without screwing up Linux entirely?

  Read the article

• Acer Aspire ASE700-UQ660A will not respond to power button

  - by Tim R.

  This is something of a continuation of this question. I am now completely unable to boot this computer. The last time I used it, I used hibernation mode. When I needed to use it again, it would not respond at all to the power button, keyboard, or mouse. I tried: Holding down the power button for 15 seconds pressing the power button Unplugging the power cord for 30 seconds, plugging it back in, and trying again Removing the motherboard battery for over a minute and reinstalling it Before removing the motherboard battery, none of the lights on the front of the computer lit up. After reinstalling the battery and plugging the power cord back in, the light behind the power button is constantly illuminated (without even pressing the power button), but there is still no response to the power button, no fans turned on, nothing else that would indicate that it is running. System: Acer Aspire ASE700-UQ660A (Specs should be all factory defaults except:) 4 GB RAM Nvidia GeForce 8600 GT with driver version 197.45 Windows 7 Professional 64 bit

  Read the article

• Windows 7 MSDN version

  - by Larry Branham

  I recently purchased a copy of Windows 7 online. Upon trying to install, it stopped and I was told that it could not find a 64 bit driver for my CD/DVD and I could not finish install. I contacted Microsoft and was told that this was something called an MSDN version according to the product key and that was the reason for the problem. They also said is was illegal to sell it to me. The company I bought it from never returned my calls or emails and luckily I got money back through Amazon. Amazon didn't even want me to send it back. Anyway my question is, is there anyway to load this onto my system and will I have problems or should I just throw it out? Any help would be great. Thanks

  Read the article

• Why is this LTO4 Tape-drive not working

  - by Tim Haegele

  # modprobe mptsas # dmesg [ 4274.796796] scsi target7:0:0: mptsas: ioc1: delete device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4274.939579] mptsas 0000:01:00.0: PCI INT A disabled [ 4280.934531] Fusion MPT SAS Host driver 3.04.12 [ 4280.934552] mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4280.934692] mptbase: ioc2: Initiating bringup [ 4281.490183] ioc2: LSISAS1064E B3: Capabilities={Initiator} [ 4281.490203] mptsas 0000:01:00.0: setting latency timer to 64 [ 4293.555274] scsi8 : ioc2: LSISAS1064E B3, FwRev=011e0000h, Ports=1, MaxQ=277, IRQ=16 [ 4293.574906] mptsas: ioc2: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x50050763124b29ac [ 4293.576471] scsi 8:0:0:0: Sequential-Access IBM ULTRIUM-HH4 B6W1 PQ: 0 ANSI: 6 [ 4293.578549] st 8:0:0:0: Attached scsi tape st0 [ 4293.578550] st 8:0:0:0: st0: try direct i/o: yes (alignment 512 B) [ 4293.578577] st 8:0:0:0: Attached scsi generic sg5 type 1 # mt -f /dev/st0 status mt -f /dev/st0 status mt: /dev/st0: rmtopen failed: Input/output error # dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 dd: opening `/dev/nst0': Input/output error I am running debian squeeze 2.6.32-5-amd64 #1 SMP Sun May 6 04:00:17 UTC 2012 x86_64 GNU/Linux Server is Fujitsu TX140 with Controller Symbios Logic SAS1064ET PCI-Express Fusion-MPT SAS Tape+Hardware is new.

  Read the article

• Windows lowers volume because of "communication"

  - by SnippetSpace

  Randomly, or at system sound (usb connect for example) Windows 8 lowers the volume of all other sources. (Same problem can exist on windows 7, just look online). This is happening because of the "communication detection" made to detect phone calls and then lower volume. But in my case it happens all the time without reason as if windows always considers myself in a call. Do any of you have the same problem? is this a driver issue or a windows issue? I know this has been posted many times but they usually just tell you to turn off the setting above. I'm looking for an explanation or a solution :). Thanks for your feedback and ideas.

  Read the article

• WinXP How to Tunnel LPT over USB

  - by Michael Pruitt

  I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

  Read the article

• Can't set 1280x1024 on Ubuntu with Nvidia Geforce 8400 GS

  - by torbengb

  Ubuntu doesn't offer 1280x1024 but that's what my monitor has -- I want to set that resolution but need help doing so. Ubuntu offers 1360x768, 1152x864, 1024x768 when using the Nvidia driver version 180. This is Ubuntu 9.04 installed as "Wubi" through Windows, I believe it's the amd64 version. Google gave me this precise explanation which is complete latin to me; I'm a Windows guy and not familiar with Terminal. These SU questions also don't provide answers, hence this new question. I hope you can help, and I will provide additional info if required.

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• WHEA_UNCORRECTABLE_ERROR BSOD - what is wrong?

  - by Arcane

  Hello I have a problem with my PC getting the WHEA_UNCORRECTABLE_ERROR bsod. It is a few months old pc. I am not overclocking or changing anything in bios, but sometimes (this is my third time) I get this bsod out of nowhere. This last time I was just watching some stream on twitch when the pc suddenly crashed. I have everything up to date in windows update and every other driver as well. Everything in Open hardware Monitor seems ok. Right now as of 10 min after the crash, the CPU temp is at 38°C, fans are at 1400RPM I am using Windows 8.1 Pro 64b. Here are my spec: Intel i5-4570 CPU @ 3.20GHz, Kingston HyperX 8GB DDR3 1600 XMP, GeForce GTX 660 with 340.52 drivers, Corsair VS450 power supply, Gigabyte GA-H87-HD3 you can see the BSOD dump here: https://www.dropbox.com/s/88i1q2nnqnpzux1/082514-29656-01.dmp?dl=0 Can anybody tell me what is wrong?

  Read the article

• How to tell X.org to reload input device module?

  - by Vi

  When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again. Xorg.0.log: ... (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD) (--) Synaptics Touchpad: touchpad found # { rmmod psmouse && echo mem /sys/power/state && modprobe psmouse; } (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/input/mice" ... How to tell X.org to try it's InputDevice again (without restarting X server)? P.S. rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Update: Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.

  Read the article

• Horizontal scrolling not working in Windows 7 running on MBP using Boot Camp

  - by Rubicon

  Is there a way to enable horizontal scrolling on Windows installed on a bootcamp partition of MBP 13" Core 2 Duo, using a trackpad? I had a look into the Boot Camp Control panel settings, but could not find a setting that suggested this. I used the Boot Camp drivers that came with the MBP in the Mac OS X Install disk. The vertical scroll is working fine, and the horizontal scroll works fine in the Mac world of things, so the hardware is fine. I think maybe there might be an additional install for a driver that we may have to install? Or any update? Thanks in advance for all your help. :)

  Read the article

• Lenovo DVD Drive Disabled After Windows 7 Install

  - by David Lacher

  Upgraded hard drive in Lenovo T61P; decided to start fresh with Windows 7 Pro. Windows installed, so DVD drive was working. All of a sudden, driver is not recognized. Device is "HL-DT-ST DVDRAM GSA-U10N ATA Device". It appears on device manager but with the yellow tag; have tried uninstalling, searching for drivers, everything I can think of. Cannot even start over with Windows 7 installation disk because disk spins but then stops and My Computer does not recognize the drive. Help please. thank you. David Lacher

  Read the article

• How to tell X.org to reload input device module? (Working around suspend-to-ram crash on Acer laptop

  - by Vi

  When X.org boots up, Synaptics touchpad works well. But when I remove the module it falls back to /dev/input/mice and don't use normal driver even when touchpad is available again. Xorg.0.log: ... (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD) (--) Synaptics Touchpad: touchpad found # { rmmod psmouse && echo mem /sys/power/state && modprobe psmouse; } (WW) : No Device specified, looking for one... (II) : Setting Device option to "/dev/input/mice" ... How to tell X.org to try it's InputDevice again (without restarting X server)? P.S. rmmod psmouse is needed to prevent crashing of Acer Extensa 5220 when resuming from suspend-to-ram. Update: Found answer myself: Doing xinput set-int-prop "Synaptics Touchpad" "Device Enabled" 8 1 after reloading the kernel module reloads touchpad. Now suspend-to-ram works OK.

  Read the article

• List all devices of system

  - by pareshverma91

  In my understanding linux can list only those devices which it can understand, i.e. for which the drivers have been installed. I think lspci is the command for that. But how can one figure out if there exists some device in the system for which the drivers are not installed and perhaps some hint about what that device is for and what driver would suffice for it. I would like to know this info so as to be able to recompile my linux kernel to a minimum and would like to avoid a hit and trial approach.

  Read the article

• How to debug xsane "no devices available" error on 64 bit Ubuntu 10.04

  - by BD at Rivenhill

  I have a Brother MFC-J615W printer/scanner and I wish to use the scanning feature across a network with a computer running 64-bit Ubuntu 10.04. I have installed the drivers from the Brother website and followed all of the instructions, and printing works fine, but xsane (installed from repositories) produces a popup with the message "no devices available" on startup. I recently had success with a similar approach when installing drivers for a Brother MFC-495CW on 32-bit Unbuntu 9.10, so I am aware of issues such as requiring root access if the driver permissions are not set correctly, but running xsane as root does not solve this problem. Are there any tools available to debug this problem further or does anyone have advice on how to proceed?

  Read the article

• Lenovo DVD Drive Disabled After Windows 7 Install

  - by David Lacher

  Upgraded hard drive in Lenovo T61P; decided to start fresh with Windows 7 Pro. Windows installed, so DVD drive was working. All of a sudden, driver is not recognized. Device is "HL-DT-ST DVDRAM GSA-U10N ATA Device". It appears on device manager but with the yellow tag; have tried uninstalling, searching for drivers, everything I can think of. Cannot even start over with Windows 7 installation disk because disk spins but then stops and My Computer does not recognize the drive. Help please. thank you. David Lacher

  Read the article

• Windows-Server-2003 setup on Dell-PowerEdge R310 is hanging [closed]

  - by Robert Rose

  Possible Duplicate: Problems installing OS on Dell PowerEdge R410 I am trying to configure a Dell PowerEdge R310 server with Windows Server 2003. I've already configured the two hard drives as RAID1. The HD controller is PERC H700 Integrated and Adapter. Trying to stay with Windows Server 2003 on this fairly new server to save on cost and keep the configuration the same as my old server, which has been running like a champ for five years. Problem: During the OS installation, after everything has been copied from the installation CD, the installation hangs at a window labeled 'Windows Setup' with the message 'Setup is starting Windows' at the bottom. I'm wondering if this is a driver problem and if so, where can I get the drivers for the R310 or where can I get the media for the latest version of Windows Server 2003 which may include the necessary drivers? Will certainly appreciate some help here.

  Read the article

• Why do my speakers get distorted randomly on Windows 7?

  - by Daniel Fischer

  I have a studio monitor setup. I have 2 KRK 6's and a Focusrite Firewire Pro 24. Every few hours my speakers sound distorted and my solution has been go to sound levels Properties of Saffire Audio Device Advanced Default Format Toggle to 16 bit then back to 24bit. Why does it screw up every few hours? Sometimes one speaker doesn't output too and this same process resets it but that's more rare. Is this a OS issue or Focusrite Driver Issue?

  Read the article

• NIC models for HVM guests in Xen 4.0

  - by Jed Daniels

  Is there a list of NIC models that I should use with various HVM guests in Xen 4.0? Is there even a list of possible choices for the model=field? I'm planning on running both Windows and FreeBSD guests on the particular Xen box that I'm configuring now, and ideally I'd like a setting that can work on both of them and get me gigabit speeds without a lot of extra hassle loading special drivers (similar to VMware's e1000 NIC option). Any suggestions? The vif line I'm currently using in my config is: vif = [ 'type=ioemu,bridge=eth0,model=ne2k_pci,script=vif-ovs' ] This works in my Windows XP SP3 VM, but is only recognized as a 10Mbit interface. Changing to model=e1000 or model=i82557b resulted in Windows not being able to find a driver for the NIC.

  Read the article

• eSATA hotswap using Jmicron JMB363 controller

  - by Stephen

  I have tried both IDE and AHCI modes in the BIOS. Also tried many different driver revisions. I can't seem to hot swap an external SATA drive. I can use the wizard to safely remove it, but reconnecting doesn't do anything unless I reboot. I use a thermaltake dock, and I would like to swap in my backup drive sometimes to do images (they take all day over USB). I can reboot, but I'd like to use hot swap. The controller is a Jmicron JMB363. I'm using the latest BIOS on my motherboard, as well.

  Read the article

• High Apache CPU usage, but low nginx - Configured correctly?

  - by Buckers

  We've just moved a website of ours over to a brand new high-spec Linux server (1x Intel Xeon E3-1230 v2 @ 3.30GHz, 8GB DDR3 ECC, 2x 128GB SATA SSD RAID1). The server has been configured to use nginx but we're not sure if its working correctly. The site always loads very fast to us (http://www.onedirection.net), but Plesk often sends us reports that the Apache CPU usage percentage reaches high leves, yet when we look at the nginx percentage it's always very low. We've come from a Windows background so are very new to Linux, but shouldn't nginx run INSTEAD of apache? Here's a screenshot from Plesk showing the CPU usage: http://www.pixelkicks.co.uk/_download/plesk.JPG The website gets around 20,000 visitors per day, and we use W3 Total Cache to get it running as fast as possible. MySQL has been optimised well. Memory usage is only running at 2GB of the 8GB. Does this look right? How can we tell that nginx is doing most of the work? Thanks, Chris.

  Read the article

• no display on tv when connecting pc via hdmi in win7

  - by Kane

  The system of pc is win7 32bit, the video card is ATI 4670. The tv is philips 74xx series. And the monitor is Dell 19' that connect with pc via VGA. The tv can receive the singal and show the pictures when booting the pc(bios self checking, the logo of windows 7), however the tv says there is no signal after the win7 login window shows. I have installed the latest CCC and driver of ATI video card. Does anyone have idea for it?

  Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >