Search Results

Search found 15408 results on 617 pages for 'import module'.

Page 287/617 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

  • Reconciling the Boy Scout Rule and Opportunistic Refactoring with code reviews

    - by t0x1n
    I am a great believer in the Boy Scout Rule: Always check a module in cleaner than when you checked it out." No matter who the original author was, what if we always made some effort, no matter how small, to improve the module. What would be the result? I think if we all followed that simple rule, we'd see the end of the relentless deterioration of our software systems. Instead, our systems would gradually get better and better as they evolved. We'd also see teams caring for the system as a whole, rather than just individuals caring for their own small little part. I am also a great believer in the related idea of Opportunistic Refactoring: Although there are places for some scheduled refactoring efforts, I prefer to encourage refactoring as an opportunistic activity, done whenever and wherever code needs to cleaned up - by whoever. What this means is that at any time someone sees some code that isn't as clear as it should be, they should take the opportunity to fix it right there and then - or at least within a few minutes Particularly note the following excerpt from the refactoring article: I'm wary of any development practices that cause friction for opportunistic refactoring ... My sense is that most teams don't do enough refactoring, so it's important to pay attention to anything that is discouraging people from doing it. To help flush this out be aware of any time you feel discouraged from doing a small refactoring, one that you're sure will only take a minute or two. Any such barrier is a smell that should prompt a conversation. So make a note of the discouragement and bring it up with the team. At the very least it should be discussed during your next retrospective. Where I work, there is one development practice that causes heavy friction - Code Review (CR). Whenever I change anything that's not in the scope of my "assignment" I'm being rebuked by my reviewers that I'm making the change harder to review. This is especially true when refactoring is involved, since it makes "line by line" diff comparison difficult. This approach is the standard here, which means opportunistic refactoring is seldom done, and only "planned" refactoring (which is usually too little, too late) takes place, if at all. I claim that the benefits are worth it, and that 3 reviewers will work a little harder (to actually understand the code before and after, rather than look at the narrow scope of which lines changed - the review itself would be better due to that alone) so that the next 100 developers reading and maintaining the code will benefit. When I present this argument my reviewers, they say they have no problem with my refactoring, as long as it's not in the same CR. However I claim this is a myth: (1) Most of the times you only realize what and how you want to refactor when you're in the midst of your assignment. As Martin Fowler puts it: As you add the functionality, you realize that some code you're adding contains some duplication with some existing code, so you need to refactor the existing code to clean things up... You may get something working, but realize that it would be better if the interaction with existing classes was changed. Take that opportunity to do that before you consider yourself done. (2) Nobody is going to look favorably at you releasing "refactoring" CRs you were not supposed to do. A CR has a certain overhead and your manager doesn't want you to "waste your time" on refactoring. When it's bundled with the change you're supposed to do, this issue is minimized. The issue is exacerbated by Resharper, as each new file I add to the change (and I can't know in advance exactly which files would end up changed) is usually littered with errors and suggestions - most of which are spot on and totally deserve fixing. The end result is that I see horrible code, and I just leave it there. Ironically, I feel that fixing such code not only will not improve my standings, but actually lower them and paint me as the "unfocused" guy who wastes time fixing things nobody cares about instead of doing his job. I feel bad about it because I truly despise bad code and can't stand watching it, let alone call it from my methods! Any thoughts on how I can remedy this situation ?

    Read the article

  • C# 4.0: COM Interop Improvements

    - by Paulo Morgado
    Dynamic resolution as well as named and optional arguments greatly improve the experience of interoperating with COM APIs such as Office Automation Primary Interop Assemblies (PIAs). But, in order to alleviate even more COM Interop development, a few COM-specific features were also added to C# 4.0. Ommiting ref Because of a different programming model, many COM APIs contain a lot of reference parameters. These parameters are typically not meant to mutate a passed-in argument, but are simply another way of passing value parameters. Specifically for COM methods, the compiler allows to declare the method call passing the arguments by value and will automatically generate the necessary temporary variables to hold the values in order to pass them by reference and will discard their values after the call returns. From the point of view of the programmer, the arguments are being passed by value. This method call: object fileName = "Test.docx"; object missing = Missing.Value; document.SaveAs(ref fileName, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing); can now be written like this: document.SaveAs("Test.docx", Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value, Missing.Value); And because all parameters that are receiving the Missing.Value value have that value as its default value, the declaration of the method call can even be reduced to this: document.SaveAs("Test.docx"); Dynamic Import Many COM methods accept and return variant types, which are represented in the PIAs as object. In the vast majority of cases, a programmer calling these methods already knows the static type of a returned object form the context of the call, but has to explicitly perform a cast on the returned values to make use of that knowledge. These casts are so common that they constitute a major nuisance. To make the developer’s life easier, it is now possible to import the COM APIs in such a way that variants are instead represented using the type dynamic which means that COM signatures have now occurrences of dynamic instead of object. This means that members of a returned object can now be easily accessed or assigned into a strongly typed variable without having to cast. Instead of this code: ((Excel.Range)(excel.Cells[1, 1])).Value2 = "Hello World!"; this code can now be used: excel.Cells[1, 1] = "Hello World!"; And instead of this: Excel.Range range = (Excel.Range)(excel.Cells[1, 1]); this can be used: Excel.Range range = excel.Cells[1, 1]; Indexed And Default Properties A few COM interface features are still not available in C#. On the top of the list are indexed properties and default properties. As mentioned above, these will be possible if the COM interface is accessed dynamically, but will not be recognized by statically typed C# code. No PIAs – Type Equivalence And Type Embedding For assemblies indentified with PrimaryInteropAssemblyAttribute, the compiler will create equivalent types (interfaces, structs, enumerations and delegates) and embed them in the generated assembly. To reduce the final size of the generated assembly, only the used types and their used members will be generated and embedded. Although this makes development and deployment of applications using the COM components easier because there’s no need to deploy the PIAs, COM component developers are still required to build the PIAs.

    Read the article

  • How can I back up my ubuntu system?

    - by Eloff
    I'm sure there's a lot of questions on here similar to this, and I've been reading them, but I still feel this warrants a new question. I want nightly, incremental backups (full disk images would waste a lot of space - unless compressed somehow.) Preferably rotating or deleting old backups when running out of space or after a fixed number of backups. I want to be able to quickly and painlessly restore my system from these backups. This is my first time running ubuntu as my main development machine and I know from my experience with it as a server and in virtual machines that I regularly manage to make it unbootable or damage it to the point of being unable to rescue it. So how would you recommend I do this? There are so many options out there I really don't know where to start. There seems to be a vocal school of thought that it's sufficient to backup your home directory and the list of installed packages from the package manager. I've already installed lots of things from source, or outside of the package manager (development tools, ides, compilers, graphics drivers, etc.) So at the very least, if I do not back up the operating system itself I need to grab all config files, all program binaries, all created but required files, etc. I'd rather backup too much than too little - an ubuntu install is tiny anyway. Also this drastically reduces the restore time, which would cost me more in my time than the extra storage space. I tried using Deja Dup to backup the root partition, excluding some things like /mnt /media /dev /proc etc. Although many websites assured me you can backup a running linux system this way - that seems to be false as it complained that it could not backup the following files: /boot/System.map-3.0.0-17-generic /boot/System.map-3.2.0-22-generic /boot/vmcoreinfo-3.0.0-17-generic /boot/vmlinuz-3.0.0-17-generic /boot/vmlinuz-3.2.0-22-generic /etc/.pwd.lock /etc/NetworkManager/system-connections/LAN Connection /etc/apparmor.d/cache/lightdm-guest-session /etc/apparmor.d/cache/sbin.dhclient /etc/apparmor.d/cache/usr.bin.evince /etc/apparmor.d/cache/usr.lib.telepathy /etc/apparmor.d/cache/usr.sbin.cupsd /etc/apparmor.d/cache/usr.sbin.tcpdump /etc/apt/trustdb.gpg /etc/at.deny /etc/ati/inst_path_default /etc/ati/inst_path_override /etc/chatscripts /etc/cups/ssl /etc/cups/subscriptions.conf /etc/cups/subscriptions.conf.O /etc/default/cacerts /etc/fuse.conf /etc/group- /etc/gshadow /etc/gshadow- /etc/mtab.fuselock /etc/passwd- /etc/ppp/chap-secrets /etc/ppp/pap-secrets /etc/ppp/peers /etc/security/opasswd /etc/shadow /etc/shadow- /etc/ssl/private /etc/sudoers /etc/sudoers.d/README /etc/ufw/after.rules /etc/ufw/after6.rules /etc/ufw/before.rules /etc/ufw/before6.rules /lib/ufw/user.rules /lib/ufw/user6.rules /lost+found /root /run/crond.reboot /run/cups/certs /run/lightdm /run/lock/whoopsie/lock /run/udisks /var/backups/group.bak /var/backups/gshadow.bak /var/backups/passwd.bak /var/backups/shadow.bak /var/cache/apt/archives/lock /var/cache/cups/job.cache /var/cache/cups/job.cache.O /var/cache/cups/ppds.dat /var/cache/debconf/passwords.dat /var/cache/ldconfig /var/cache/lightdm/dmrc /var/crash/_usr_lib_x86_64-linux-gnu_colord_colord.102.crash /var/lib/apt/lists/lock /var/lib/dpkg/lock /var/lib/dpkg/triggers/Lock /var/lib/lightdm /var/lib/mlocate/mlocate.db /var/lib/polkit-1 /var/lib/sudo /var/lib/urandom/random-seed /var/lib/ureadahead/pack /var/lib/ureadahead/run.pack /var/log/btmp /var/log/installer/casper.log /var/log/installer/debug /var/log/installer/partman /var/log/installer/syslog /var/log/installer/version /var/log/lightdm/lightdm.log /var/log/lightdm/x-0-greeter.log /var/log/lightdm/x-0.log /var/log/speech-dispatcher /var/log/upstart/alsa-restore.log /var/log/upstart/alsa-restore.log.1.gz /var/log/upstart/console-setup.log /var/log/upstart/console-setup.log.1.gz /var/log/upstart/container-detect.log /var/log/upstart/container-detect.log.1.gz /var/log/upstart/hybrid-gfx.log /var/log/upstart/hybrid-gfx.log.1.gz /var/log/upstart/modemmanager.log /var/log/upstart/modemmanager.log.1.gz /var/log/upstart/module-init-tools.log /var/log/upstart/module-init-tools.log.1.gz /var/log/upstart/procps-static-network-up.log /var/log/upstart/procps-static-network-up.log.1.gz /var/log/upstart/procps-virtual-filesystems.log /var/log/upstart/procps-virtual-filesystems.log.1.gz /var/log/upstart/rsyslog.log /var/log/upstart/rsyslog.log.1.gz /var/log/upstart/ureadahead.log /var/log/upstart/ureadahead.log.1.gz /var/spool/anacron/cron.daily /var/spool/anacron/cron.monthly /var/spool/anacron/cron.weekly /var/spool/cron/atjobs /var/spool/cron/atspool /var/spool/cron/crontabs /var/spool/cups

    Read the article

  • Help trying to get two-finger scrolling to work on Asus UL80VT

    - by Dan2k3k4
    Multi-touch works fine on Windows 7 with: two-fingers scroll vertical and horizontally, two-finger tap for middle click, and three-finger tap for right click. However with Ubuntu, I've never been able to get multi-touch to "save" and work, I was able to get it to work a few times but after restarting - it would just reset back. I have the settings for two-finger scrolling on: Mouse and Touchpad Touchpad Two-finger scrolling (selected) Enable horizontal scrolling (ticked) The cursor stops moving when I try to scroll with two fingers, but it doesn't actually scroll the page. When I perform xinput list, I get: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ETPS/2 Elantech ETF0401 id=13 [slave pointer (2)] I've tried to install some 'synaptics-dkms' bug-fix (from a few years back) but that didn't work, so I removed that. I've tried installing 'uTouch' but that didn't seem to do anything so removed it. Here's what I have installed now: dpkg --get-selections installed-software grep 'touch\|mouse\|track\|synapt' installed-software libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install printer-driver-ptouch --- install ptouch-driver --- install xserver-xorg-input-multitouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-vmmouse --- install libnetfilter-conntrack3 --- install libxatracker1 --- install xserver-xorg-input-synaptics --- install So, I'll start again, what should I do now to get two-finger scrolling to work and ensure it works after restarting? Also doing: synclient TapButton1=1 TapButton2=2 TapButton3=3 ...works but doesn't save after restarting. However doing: synclient VertTwoFingerScroll=1 HorizTwoFingerScroll=1 Does NOT work to fix the two-finger scrolling. Output of: cat /var/log/Xorg.0.log | grep -i synaptics [ 4.576] (II) LoadModule: "synaptics" [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.577] (II) Module synaptics: vendor="X.Org Foundation" [ 4.577] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech ETF0401' [ 4.577] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: x-axis range 0 - 1088 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: y-axis range 0 - 704 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: pressure range 0 - 255 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: finger width range 0 - 16 [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: buttons: left right middle double triple scroll-buttons [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: Vendor 0x2 Product 0xe [ 4.584] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: (accel) MinSpeed is now constant deceleration 2.5 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: MaxSpeed is now 1.75 [ 4.588] (**) synaptics: ETPS/2 Elantech ETF0401: AccelFactor is now 0.154 [ 4.589] (--) synaptics: ETPS/2 Elantech ETF0401: touchpad found Tried installing synaptiks but that didn't seem to work either, so removed it. Temporary Fix (works until I restart) Doing the following commands: modprobe -r psmouse modprobe psmouse proto=imps Works but now xinput list shows up as: Virtual core pointer id=2 [master pointer (3)] ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ImPS/2 Generic Wheel Mouse id=13 [slave pointer (2)] Instead of Elantech, and it gets reset when I reboot. Solution (not ideal for most people) So, I ended up reinstalling a fresh 12.04 after indirectly playing around with burg and plymouth then removing plymouth which removed 50+ packages (I saw the warnings but was way too tired and assumed I could just 'reinstall' them all after (except that didn't work). Right now xinput list shows up as: ? Virtual core pointer --- id=2 [master pointer (3)] ? ? Virtual core XTEST pointer --- id=4 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad --- id=13 [slave pointer (2)] grep 'touch\|mouse\|track\|synapt' installed-software libnetfilter-conntrack3 --- install libsoundtouch0 --- install libutouch-evemu1 --- install libutouch-frame1 --- install libutouch-geis1 --- install libutouch-grail1 --- install libxatracker1 --- install mousetweaks --- install printer-driver-ptouch --- install xserver-xorg-input-mouse --- install xserver-xorg-input-synaptics --- install xserver-xorg-input-vmmouse --- install cat /var/log/Xorg.0.log | grep -i synaptics [ 4.890] (II) LoadModule: "synaptics" [ 4.891] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.892] (II) Module synaptics: vendor="X.Org Foundation" [ 4.892] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad' [ 4.892] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 4.956] (II) synaptics: ETPS/2 Elantech Touchpad: ignoring touch events for semi-multitouch device [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 1088 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 704 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15 [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe [ 4.956] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 4.980] () synaptics: ETPS/2 Elantech Touchpad: MaxSpeed is now 1.75 [ 4.980] (**) synaptics: ETPS/2 Elantech Touchpad: AccelFactor is now 0.154 [ 4.980] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found So, if all else fails, reinstall Linux :/

    Read the article

  • SQL Server source control from Visual Studio

    - by David Atkinson
    Developers have long since had to context switch between two IDEs, Visual Studio for application code development and SQL Server Management Studio for database development. While this is accepted, especially given the richness of the database development feature set in SSMS, loading a separate tool can seem a little overkill. This is where SQL Connect comes in. This is an add-in to Visual Studio that provides a connected development experience for the SQL Server developer. Connected database development involves modifying a development sandbox database, as opposed to offline development, where SQL text files are modified independently of the database. One of the main complaints of Data Dude (VS DBPro) is that it enforces the offline approach. This gripe is what SQL Connect addresses. If you don't already use SQL Source Control, you can get up and running with SQL Connect by adding a new project to your Visual Studio solution as follows: Then choose your existing development database and you're ready to go. If you already use SQL Source Control, you will need to link SQL Connect to your existing database scripts folder repository, so SQL Connect and SQL Source Control can be used collaboratively (note that SQL Source Control v.3.0.9.18 or later is required). Locate the repository (this can be found in the Setup tab in SQL Source Control). .and create a working folder for it (here I'm using TortoiseSVN). Back in Visual Studio, locate the SQL Connect panel (in the View menu if it hasn't auto loaded) and select Import SQL Source Control project Locate your working folder and click Import. This creates a Red Gate database project under your solution: From here you can modify your development database, and manage your changes in source control. To associate your development database with the project, right click on the project node, select Properties, set the database and Save. Now you're ready to make some changes. Locate the object you'd like to modify in the Solution Explorer, and double click it to invoke a query window or table designer. You also have the option to edit the creation SQL directly using Edit SQL File in Project. Keeping the development database and Visual Studio project in sync is as easy as clicking on a button. One you've made your change, you can use whichever mechanism you choose to commit to source control. Here I'm using the free open-source AnkhSVN to integrate Subversion with Visual Studio. Maintaining your database in a Visual Studio solution means that you can commit database changes and application code changes in the same changeset. This is desirable if you have continuous integration set up as you want to ensure that all files related to a change are committed atomically, so you avoid an interim "broken build". More discussion on SQL Connect and its benefits can be found in the following article on Simple Talk: No More Disconnected SQL Development in Visual Studio The SQL Connect project team is currently assessing the backlog for the next development effort, and they'd appreciate your feature suggestions, as well as your votes on their suggestions site: http://redgate.uservoice.com/forums/140800-sql-connect-for-visual-studio- A 28-day free trial of SQL Connect is available from the Red Gate website. Technorati Tags: SQL Server

    Read the article

  • Code is not the best way to draw

    - by Bertrand Le Roy
    It should be quite obvious: drawing requires constant visual feedback. Why is it then that we still draw with code in so many situations? Of course it’s because the low-level APIs always come first, and design tools are built after and on top of those. Existing design tools also don’t typically include complex UI elements such as buttons. When we launched our Touch Display module for Netduino Go!, we naturally built APIs that made it easy to draw on the screen from code, but very soon, we felt the limitations and tedium of drawing in code. In particular, any modification requires a modification of the code, followed by compilation and deployment. When trying to set-up buttons at pixel precision, the process is not optimal. On the other hand, code is irreplaceable as a way to automate repetitive tasks. While tools like Illustrator have ways to repeat graphical elements, they do so in a way that is a little alien and counter-intuitive to my developer mind. From these reflections, I knew that I wanted a design tool that would be structurally code-centric but that would still enable immediate feedback and mouse adjustments. While thinking about the best way to achieve this goal, I saw this fantastic video by Bret Victor: The key to the magic in all these demos is permanent execution of the code being edited. Whenever a parameter is being modified, everything is re-executed immediately so that the impact of the modification is instantaneously visible. If you do this all the time, the code and the result of its execution fuse in the mind of the user into dual representations of a single object. All mental barriers disappear. It’s like magic. The tool I built, Nutshell, is just another implementation of this principle. It manipulates a list of graphical operations on the screen. Each operation has a nice editor, and translates into a bit of code. Any modification to the parameters of the operation will modify the bit of generated code and trigger a re-execution of the whole program. This happens so fast that it feels like the drawing reacts instantaneously to all changes. The order of the operations is also the order in which the code gets executed. So if you want to bring objects to the front, move them down in the list, and up if you want to move them to the back: But where it gets really fun is when you start applying code constructs such as loops to the design tool. The elements that you put inside of a loop can use the loop counter in expressions, enabling crazy scenarios while retaining the real-time edition features. When you’re done building, you can just deploy the code to the device and see it run in its native environment: This works thanks to two code generators. The first code generator is building JavaScript that is executed in the browser to build the canvas view in the web page hosting the tool. The second code generator is building the C# code that will run on the Netduino Go! microcontroller and that will drive the display module. The possibilities are fascinating, even if you don’t care about driving small touch screens from microcontrollers: it is now possible, within a reasonable budget, to build specialized design tools for very vertical applications. Direct feedback is a powerful ally in many domains. Code generation driven by visual designers has become more approachable than ever thanks to extraordinary JavaScript libraries and to the powerful development platform that modern browsers provide. I encourage you to tinker with Nutshell and let it open your eyes to new possibilities that you may not have considered before. It’s open source. And of course, my company, Nwazet, can help you develop your own custom browser-based direct feedback design tools. This is real visual programming…

    Read the article

  • Windows Azure Mobile Services Updates Keep Coming

    - by Clint Edmonson
    Some exciting new Windows Azure Mobile Services features were delivered to production this week. The highlights include: iPhone and iPad connectivity support via a new iOS SDK Integrated Authentication so developers can configure user authentication via Microsoft Account, Facebook, Twitter, and Google. New server-side Mobile Service script modules Access to Structured Storage, Windows Azure Blob, Table, Queues, and ServiceBus Email services through partnership with SendGrid SMS & voice services through partnership with Twilio Mobile Services hosting expanded to west coast US The iOS SDK I’m excited to share that we've announced the release of an under-development iOS client SDK for Windows Azure Mobile Services. The iOS SDK joins the Windows 8 SDK launched with Windows Azure Mobile Services as well as client SDKs released by Xamarin for MonoTouch and MonoDroid.  The native iOS SDK is for developers programming in Objective-C on the iPhone and iPad platforms. The SDK gives developers the same level of access to data storage using dynamic schematization that is available for Windows 8. Also, iOS applications can use the same authentication options available in Mobile Services. While full iOS support is still in development, the libraries are currently available on GitHub. There’s a great getting started tutorial to walk you through building a simple iOS “Todo List” app that stores data in Windows Azure.  These additional tutorials explore how to use the iOS client libraries to store data and authenticate users: Get Started with data in Mobile Services for iOS Get Started with authentication in Mobile Services for iOS What’s New in Authentication Available to both iOS and Windows 8 developers, Mobile Services has expanded its authentication options.  Developers can now use Microsoft, Facebook, Twitter, and Google authentication. Similar to using Microsoft accounts for authentication, developers must sign up and through Facebook, Twitter, or Google's developer portal in order to authenticate through them.  These tutorials walk through how to register your Mobile Service with an identity provider: How to register your app with Microsoft Account How to register your app with Facebook How to register your app with Twitter How to register your app with Google And these tutorials walk through authenticating against Mobile Services: Get started with authentication in Mobile Services for Windows Store (C#) Get started with authentication in Mobile Services for Windows Store (JavaScript) Get started with authentication in Mobile Services for iOS What’s New in Mobile Service Scripts Some great new functionality is now available in the Mobile Service script layer.  These server side scripts are triggered off of any CRUD operation on a Mobile Service's table and can already handle doing data and query validation, filtering, web requests and more.  Today, the Azure SDK module is now available to these scripts giving them access to blob storage, service bus, table storage.  Check out the new tutorials on the Windows Azure Node.js developer center to learn more about working with Blob, Tables, Queues and Service Bus using the azure module. In addition, SendGrid and Twilio are now available via modules that can be called from the scripts as well.  This gives developers the ability to send emails (SendGrid) or SMS text messages (Twilio) whenever a script is fired.  Windows Azure customers receive a special offer of 25,000 free emails per month from SendGrid and 1000 free text messages from Twilio. Expanded Data Center Availability In addition to Mobile Services being available in our US East data center, they can now be spun up in US West. The above features are all now live in production and are available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using Mobile Services today. The Windows Azure Mobile Developer Center has been updated with new tutorials that cover these new features in detail. And don’t forget - Windows Azure Mobile Services are still free for your first ten applications running on shared compute instances. Stay tuned to my twitter feed for Windows Azure announcements, updates, and links: @clinted

    Read the article

  • RPi and Java Embedded GPIO: Writing Java code to blink LED

    - by hinkmond
    So, you've followed the previous steps to install Java Embedded on your Raspberry Pi ?, you went to Fry's and picked up some jumper wires, LEDs, and resistors ?, you hooked up the wires, LED, and resistor the the correct pins ?, and now you want to start programming in Java on your RPi? Yes? ???????! OK, then... Here we go. You can use the following source code to blink your first LED on your RPi using Java. In the code you can see that I'm not using any complicated gpio libraries like wiringpi or pi4j, and I'm not doing any low-level pin manipulation like you can in C. And, I'm not using python (hell no!). This is Java programming, so we keep it simple (and more readable) than those other programming languages. See: Write Java code to do this In the Java code, I'm opening up the RPi Debian Wheezy well-defined file handles to control the GPIO ports. First I'm resetting everything using the unexport/export file handles. (On the RPi, if you open the well-defined file handles and write certain ASCII text to them, you can drive your GPIO to perform certain operations. See this GPIO reference). Next, I write a "1" then "0" to the value file handle of the GPIO0 port (see the previous pinout diagram). That makes the LED blink. Then, I loop to infinity. Easy, huh? import java.io.* /* * Java Embedded Raspberry Pi GPIO app */ package jerpigpio; import java.io.FileWriter; /** * * @author hinkmond */ public class JerpiGPIO { static final String GPIO_OUT = "out"; static final String GPIO_ON = "1"; static final String GPIO_OFF = "0"; static final String GPIO_CH00="0"; /** * @param args the command line arguments */ public static void main(String[] args) { FileWriter commandFile; try { /*** Init GPIO port for output ***/ // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); // Reset the port unexportFile.write(GPIO_CH00); unexportFile.flush(); // Set the port for use exportFile.write(GPIO_CH00); exportFile.flush(); // Open file handle to port input/output control FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio"+GPIO_CH00+"/direction"); // Set port for output directionFile.write(GPIO_OUT); directionFile.flush(); /*--- Send commands to GPIO port ---*/ // Opne file handle to issue commands to GPIO port commandFile = new FileWriter("/sys/class/gpio/gpio"+GPIO_CH00+"/value"); // Loop forever while (true) { // Set GPIO port ON commandFile.write(GPIO_ON); commandFile.flush(); // Wait for a while java.lang.Thread.sleep(200); // Set GPIO port OFF commandFile.write(GPIO_OFF); commandFile.flush(); // Wait for a while java.lang.Thread.sleep(200); } } catch (Exception exception) { exception.printStackTrace(); } } } Hinkmond

    Read the article

  • Configuring Multiple Instances of MySQL in Solaris 11

    - by rajeshr
    Recently someone asked me for steps to configure multiple instances of MySQL database in an Operating Platform. Coz of my familiarity with Solaris OE, I prepared some notes on configuring multiple instances of MySQL database on Solaris 11. Maybe it's useful for some: If you want to run Solaris Operating System (or any other OS of your choice) as a virtualized instance in desktop, consider using Virtual Box. To download Solaris Operating System, click here. Once you have your Solaris Operating System (Version 11) up and running and have Internet connectivity to gain access to the Image Packaging System (IPS), please follow the steps as mentioned below to install MySQL and configure multiple instances: 1. Install MySQL Database in Solaris 11 $ sudo pkg install mysql-51 2. Verify if the mysql is installed: $ svcs -a | grep mysql Note: Service FMRI will look similar to the one here: svc:/application/database/mysql:version_51 3. Prepare data file system for MySQL Instance 1 zfs create rpool/mysql zfs create rpool/mysql/data zfs set mountpoint=/mysql/data rpool/mysql/data 4. Prepare data file system for MySQL Instance 2 zfs create rpool/mysql/data2 zfs set mountpoint=/mysql/data rpool/mysql/data2 5. Change the mysql/datadir of the MySQL Service (SMF) to point to /mysql/data $ svcprop mysql:version_51 | grep mysql/data $ svccfg -s mysql:version_51 setprop mysql/data=/mysql/data 6. Create a new instance of MySQL 5.1 (a) Copy the manifest of the default instance to temporary directory: $ sudo cp /lib/svc/manifest/application/database/mysql_51.xml /var/tmp/mysql_51_2.xml (b) Make appropriate modifications on the XML file $ sudo vi /var/tmp/mysql_51_2.xml - Change the "instance name" section to a new value "version_51_2" - Change the value of property name "data" to point to the ZFS file system "/mysql/data2" 7. Import the manifest to the SMF repository: $ sudo svccfg import /var/tmp/mysql_51_2.xml 8. Before starting the service, copy the file /etc/mysql/my.cnf to the data directories /mysql/data & /mysql/data2. $ sudo cp /etc/mysql/my.cnf /mysql/data/ $ sudo cp /etc/mysql/my.cnf /mysql/data2/ 9. Make modifications to the my.cnf in each of the data directories as required: $ sudo vi /mysql/data/my.cnf Under the [client] section port=3306 socket=/tmp/mysql.sock ---- ---- Under the [mysqld] section port=3306 socket=/tmp/mysql.sock datadir=/mysql/data ----- ----- server-id=1 $ sudo vi /mysql/data2/my.cnf Under the [client] section port=3307 socket=/tmp/mysql2.sock ----- ----- Under the [mysqld] section port=3307 socket=/tmp/mysql2.sock datadir=/mysql/data2 ----- ----- server-id=2 10. Make appropriate modification to the startup script of MySQL (managed by SMF) to point to the appropriate my.cnf for each instance: $ sudo vi /lib/svc/method/mysql_51 Note: Search for all occurences of mysqld_safe command and modify it to include the --defaults-file option. An example entry would look as follows: ${MySQLBIN}/mysqld_safe --defaults-file=${MYSQLDATA}/my.cnf --user=mysql --datadir=${MYSQLDATA} --pid=file=${PIDFILE} 11. Start the service: $ sudo svcadm enable mysql:version_51_2 $ sudo svcadm enable mysql:version_51 12. Verify that the two services are running by using: $ svcs mysql 13. Verify the processes: $ ps -ef | grep mysqld 14. Connect to each mysqld instance and verify: $ mysql --defaults-file=/mysql/data/my.cnf -u root -p $ mysql --defaults-file=/mysql/data2/my.cnf -u root -p Some references for Solaris 11 newbies Taking your first steps with Solaris 11 Introducing the basics of Image Packaging System Service Management Facility How To Guide For a detailed list of official educational modules available on Solaris 11, please visit here For MySQL courses from Oracle University access this page.

    Read the article

  • Patching and PCI Compliance

    - by Joel Weise
    One of my friends and master of the security universe, Darren Moffat, pointed me to Dan Anderson's blog the other day.  Dan went to Toorcon which is a security conference where he went to a talk on security patching titled, "Stop Patching, for Stronger PCI Compliance".  I realize that often times speakers will use a headline grabbing title to create interest in their talk and this one certainly got my attention.  I did not go to the conference and did not see the presentation, so I can only go by what is in the Toorcon agenda summary and on Dan's blog, but the general statement to stop patching for stronger PCI compliance seems a bit misleading to me.  Clearly patching is important to all systems management and should be a part of any organization's security hygiene.  Further, PCI does require the patching of systems to maintain compliance.  So it's important to mention that organizations should not simply stop patching their systems; and I want to believe that was not the speakers intent. So let's look at PCI requirement 6: "Unscrupulous individuals use security vulnerabilities to gain privileged access to systems. Many of these vulnerabilities are fixed by vendor- provided security patches, which must be installed by the entities that manage the systems. All critical systems must have the most recently released, appropriate software patches to protect against exploitation and compromise of cardholder data by malicious individuals and malicious software." Notice the word "appropriate" in the requirement.  This is stated to give organizations some latitude and apply patches that make sense in their environment and that target the vulnerabilities in question.  Haven't we all seen a vulnerability scanner throw a false positive and flag some module and point to a recommended patch, only to realize that the module doesn't exist on our system?  Applying such a patch would obviously not be appropriate.  This does not mean an organization can ignore the fact they need to apply security patches.  It's pretty clear they must.  Of course, organizations have other options in terms of compliance when it comes to patching.  For example, they could remove a system from scope and make sure that system does not process or contain cardholder data.  [This may or may not be a significant undertaking.  I just wanted to point out that there are always options available.] PCI DSS requirement 6.1 also includes the following note: "Note: An organization may consider applying a risk-based approach to prioritize their patch installations. For example, by prioritizing critical infrastructure (for example, public-facing devices and systems, databases) higher than less-critical internal devices, to ensure high-priority systems and devices are addressed within one month, and addressing less critical devices and systems within three months." Notice there is no mention to stop patching one's systems.  And the note also states organization may apply a risk based approach. [A smart approach but also not mandated].  Such a risk based approach is not intended to remove the requirement to patch one's systems.  It is meant, as stated, to allow one to prioritize their patch installations.   So what does this mean to an organization that must comply with PCI DSS and maintain some sanity around their patch management and overall operational readiness?  I for one like to think that most organizations take a common sense and balanced approach to their business and security posture.  If patching is becoming an unbearable task, review why that is the case and possibly look for means to improve operational efficiencies; but also recognize that security is important to maintaining the availability and integrity of one's systems.  Likewise, whether we like it or not, the cyber-world we live in is getting more complex and threatening - and I dont think it's going to get better any time soon.

    Read the article

  • 12.04 installation started to black screen during boot today

    - by Cedric
    NOTE: Most of this question is now irrelevant. UPDATE 3 summarizes the problem as it stands. I've been running 12.04 on my Lenovo laptop for one month now (updated from 11.04), and I have not had any significant problem until today. This morning, when I boot, I pass the Grub screen, then I get to the purple loading screen with dots as usual, then for some reason I got to the terminal login, with no GUI. startx gives me a black screen. Ctrl+F7-F8 didn't help either. It's similar to: After the update today no graphical interface anymore - 12.04 I followed the instructions at the end, to flush the ATI drivers (which I had installed), and fall back to the community drivers. That made me lose the login! Now I just get a black screen after the Ubuntu loading screen. I can still access the console through recovery, and I've gotten into VESA mode once or twice (not reproducible, for some reason). I've tried various permutations of xorg.conf, without success. Xorg -configure fails for now, though I might be able to get it to work. apt-get update/upgrade doesn't improve anything either. However, both Windows and the 12.04 Live CD still work beautifully, and I know that all my data is still there. Is there any way that I could somehow take the configuration from the Live CD and roll with it? I know that I could reinstall, but that sucks, frankly, especially given that there's no straight-forward way of keeping the home (which, incidentally, is unaccessible from the Live CD) Thank you. Update: it seems that the fglrx drivers are still active, even after I've --purged them. From Xorg.0.log: [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] (WW) fglrx(0): * DRI initialization failed * [ 18.235] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible * [ 18.235] (WW) fglrx(0): * 2D and 3D acceleration disabled * [ 18.235] (WW) fglrx(0): *********************************************************** [ 18.235] Fatal server error: [ 18.235] AddScreen/ScreenInit failed for driver 0 There's also a mention of the "fbdev" module. What is it? PARTIALLY SOLVED: I've undone the damage from the fglrx purge. I'm still mystified as to why uninstalling the packages didn't kill fglrx entirely, but I've now recovered the prompt. The solution to the DRI initialization error was to add radeon.modeset=0 to the GRUB boot options. So I'm back to being dropped to a prompt without any GUI. startx gives me a bunch of messages, though no obvious errors. I have little reason to suspect the video drivers, as they worked fine before today. There is no apparent error message in any of the log files. UPDATE: When I startx, I get an error, Plymounth command failed mountall: Disconnected from Plymouth This is all over the Internet, but I have not found anything that works for me yet. UPDATE 3: If I press ESC during boot, the splash screen (Plymouth!) disappears, and I no longer have any error from Plymouth. The last error message is: Stopping mount filesystems on boot I can then Ctrl+Alt+F1 to get the TTY1, but startx still does not work. Sadly, the Internet knows nothing about this error message, and neither do I. Help!

    Read the article

  • Using GMail's SMTP and IMAP servers in Notification Mailer

    - by Saroja Kandepuneni
    Overview GMail offers free, reliable, popular SMTP and IMAP services, because of which many people are interested to use it. GMail can be used when there are no in-house SMTP/IMAP servers for testing or debugging purposes. This blog explains how to install GMail SSL certificate in Concurrent Tier, testing the connection using a standalone program, running Mailer diagnostics and configuring GMail IMAP and SMTP servers for Workflow Notification Mailer Inbound and Outbound connections. GMail servers configuration SMTP server Host Name  smtp.gmail.com SSL Port  465 TLS/SSL required  Yes User Name  Your full email address (including @gmail.com or @your_domain.com) Password  Your gmail passwor  IMAP server  Host Name imap.gmail.com  SSL Port 993 TLS/SSL Required Yes  User Name  Your full email address (including @gmail.com or @your_domain.com)  Password Your gmail password GMail SSL Certificate Installation The following is the procedure to install the GMail SSL certificate Copy the below GMail SSL certificate to a file eg: gmail.cer -----BEGIN CERTIFICATE-----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-----END CERTIFICATE----- Install the SSL certificate into the default JRE location or any other location using below command Installing into a dfeault JRE location in EBS instance         # keytool -import -trustcacerts -keystore $AF_JRE_TOP/lib/security/cacerts  -storepass changeit -alias gmail-lnx_chainnedcert -file gmail.cer Install into a custom location         # keytool -import -trustcacerts -keystore <customLocation>  -storepass changeit -alias gmail-lnx_chainnedcert -file gmail.cer       <customLocation> -- directory in instance where the certificate need to be installed After running the above command you can see the following response         Trust this certificate? [no]:  yes        Certificate was added to keystore Running Mailer Command Line Diagnostics Run Mailer command line diagnostics from conccurrent tier where Mailer is running, to check the IMAP connection using the below command $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=imap -Ddbcfile=$FND_SECURE/$TWO_TASK.dbc -Dserver=imap.gmail.com -Dport=993 -Dssl=Y -Dtruststore=$AF_JRE_TOP/lib/security/cacerts -Daccount=<gmail username> -Dpassword=<password> -Dconnect_timeout=120 -Ddebug=Y -Dlogfile=GmailImapTest.log -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer Run Mailer command line diagnostics from concurrent tier where Mailer is running, to check the SMTP connection using the below command   $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=smtp -Ddbcfile=$FND_SECURE/$TWO_TASK.dbc -Dserver=smtp.gmail.com -Dport=465 -Dssl=Y -Dtruststore=$AF_JRE_TOP/lib/security/cacerts -Daccount=<gmail username> -Dpassword=<password> -Dconnect_timeout=120 -Ddebug=Y -Dlogfile=GmailSmtpTest.log -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer Standalone program to verify the IMAP connection Run the below standalone program from the concurrent tier node where Mailer is running to verify the connection with GMail IMAP server. It connects to the Gmail IMAP server with the given GMail user name and password and lists all the folders that exist in that account. If the Gmail IMAP server is not working for the  Mailer check whether the PROCESSED and DISCARD folders exist for the GMail account, if not create manually by logging into GMail account.Sample program to test GMail IMAP connection  The standalone program can be run as below  $java GmailIMAPTest GmailUsername GMailUserPassword            Standalone program to verify the SMTP connection Run the below standalone program from the concurrent tier node where Mailer is running to verify the connection with GMail SMTP server. It connects to the GMail SMTP server by authenticating with the given user name and password  and sends a test email message to the give recipient user email address. Sample program to test GMail SMTP connection The standalone program can be run as below  $java GmailSMTPTest GmailUsername gMailPassword recipientEmailAddress    Warnings As gmail.com is an external domain, the Mailer concurrent tier should allow the connection with GMail server Please keep in mind when using it for corporate facilities, that the e-mail data would be stored outside the corporate network

    Read the article

  • Sorry about the wait.

    - by Ratman21
    In the last two days have been trying remove “Iolo System Mechanic Professional” (With anti-virus and FireWall) from 3 of the 5 pc’s we have (3 lap tops and two Desk tops) as it was going to expire on the 13th.   So I could replace them with a free anti-virus (AVG) and just use the windows fire wall. I have been using the same set up on one of my desk tops (XP Pro) for 8 months and one of the Lap tops (Vista) for 5 months.   The problem was that System Mechanic did not want to go. Even after using the uninstall option on the desk top (my main PC, well its that because has the larger of all the PC’s hard drives but, is the oldest and runs XP home) and using Ccleaner to try and remove it.  It was still showing up as there and after I went a head and tried installing AVG and ran it. I found that the TCP/IP module was missing.  So no internet, I had to restore the PC back to the 1st to get the module back and then install AVG (after making sure window firewall was back on. I didn’t check that on the first try). Got the PC back to normal, very late last night. Only one of the two lap tops was easy but, even at that there are still some parts of System Mechanic on it but, AVG and firewall are working.   I may try an hunt down parts of System Mechanic on it and delete them on this lap top. Which was what finally had to do on the one of the Lap tops (also XP Home) as it would not uninstall after I restored the PC back to the 4th. So delete, delete, delete and Ccleaner (one dl file would not delete though). And I just finish installing AVG and now running a scan on the lap top. So all of this took two days (well three counting today). I started late Friday night and just finishing up now.   I only started this switch over after I had finished my Job search for day on Friday.   As for blogging on Tuesday, Wednesday and Thursday, I was busy and by the end of the day was too tired to blog, that and was hung up still on that 2nd dare of The Love Dare. So I cleaned the house, while she was out of the house. I mean, I cleaned, not just vacuumed house I cleaned the kitchen counter tops and the sinks. Did the dishes and some of the laundry over two of the those days.   As to the third day of Love Dare which is “Love is not selfish” and the dare “Whatever you put your time, energy, and money into will become more important to you. It’s hard to care for something you are not investing in. Along with restraining from negative comments, buy your spouse something that says, I was thinking of you today.”   Being on a very limited income, a lot of normal guy buying for girls is out (for one thing, the comment why did you waste our money on flowers, etc, etc, would come up. Not from me though). So that one is on hold till money issues are not a problem (no that does not mean never). The 4th day “Love is thoughtful” and the dare “Contact your spouse sometime during the business of the day. Have no agenda other than asking how he or she is doing and if there is anything you could do for them”.   I did this dare while I was still working with census last week and trying to do the dares. Well I start my CCNA classes Monday the 15th and I move on to the next Love Dare day “Love is not rude”.

    Read the article

  • T-SQL in Chicago – the LobsterPot teams with DataEducation

    - by Rob Farley
    In May, I’ll be in the US. I have board meetings for PASS at the SQLRally event in Dallas, and then I’m going to be spending a bit of time in Chicago. The big news is that while I’m in Chicago (May 14-16), I’m going to teach my “Advanced T-SQL Querying and Reporting: Building Effectiveness” course. This is a course that I’ve been teaching since the 2005 days, and have modified over time for 2008 and 2012. It’s very much my most popular course, and I love teaching it. Let me tell you why. For years, I wrote queries and thought I was good at it. I was a developer. I’d written a lot of C (and other, more fun languages like Prolog and Lisp) at university, and then got into the ‘real world’ and coded in VB, PL/SQL, and so on through to C#, and saw SQL (whichever database system it was) as just a way of getting the data back. I could write a query to return just about whatever data I wanted, and that was good. I was better at it than the people around me, and that helped. (It didn’t help my progression into management, then it just became a frustration, but for the most part, it was good to know that I was good at this particular thing.) But then I discovered the other side of querying – the execution plan. I started to learn about the translation from what I’d written into the plan, and this impacted my query-writing significantly. I look back at the queries I wrote before I understood this, and shudder. I wrote queries that were correct, but often a long way from effective. I’d done query tuning, but had largely done it without considering the plan, just inferring what indexes would help. This is not a performance-tuning course. It’s focused on the T-SQL that you read and write. But performance is a significant and recurring theme. Effective T-SQL has to be about performance – it’s the biggest way that a query becomes effective. There are other aspects too though – such as using constructs better. For example – I can write code that modifies data nicely, but if I haven’t learned about the MERGE statement and the way that it can impact things, I’m missing a few tricks. If you’re going to do this course, a good place to be is the situation I was in a few years before I wrote this course. You’re probably comfortable with writing T-SQL queries. You know how to make a SELECT statement do what you need it to, but feel there has to be a better way. You can write JOINs easily, and understand how to use LEFT JOIN to make sure you don’t filter out rows from the first table, but you’re coding blind. The first module I cover is on Query Execution. Take a look at the Course Outline at Data Education’s website. The first part of the first module is on the components of a SELECT statement (where I make you think harder about GROUP BY than you probably have before), but then we jump straight into Execution Plans. Some stuff on indexes is in there too, as is simplification and SARGability. Some of this is stuff that you may have heard me present on at conferences, but here you have me for three days straight. I’m sure you can imagine that we revisit these topics throughout the rest of the course as well, and you’d be right. In the second and third modules we look at a bunch of other aspects, including some of the T-SQL constructs that lots of people don’t know, and various other things that can help your T-SQL be, well, more effective. I’ve had quite a lot of people do this course and be itching to get back to work even on the first day. That’s not a comment about the jokes I tell, but because people want to look at the queries they run. LobsterPot Solutions is thrilled to be partnering with Data Education to bring this training to Chicago. Visit their website to register for the course. @rob_farley

    Read the article

  • Partner Blog: Hub City Media Introduces iPad Application for Oracle Identity Analytics

    - by Tanu Sood
    About the Writer:Steve Giovannetti is CTO of Hub City Media, Inc., a company that specializes in implementation and product development on the Oracle Identity Management platform. Recently, Hub City Media announced the introduction of iPad application IdentityCert for Oracle Identity Analytics. This post explore the business use cases and application of IdentityCert.Hub City Media(HCM) has been deploying certification solutions based on Oracle Identity Analytics since it first appeared on the market as Vaau RBACx. With each deployment we've seen the same pattern repeat time and time again:1. Customers suffering under the weight of manual access certification regimens deploy Oracle Identity Analytics (OIA) for automated certification. 2. OIA improves the frequency, speed, accuracy, and participation of certifications across the organization. 3. Then the certifiers, typically managers and supervisors, ask, “Is there any easier way to do these certifications offline?”The current version of OIA has a way to export certification data to a spreadsheet.  For some customers, we've leveraged this feature and combined it with some of our own custom code to provide a solution based on spreadsheet exports and imports.  Customers export the certification to Microsoft Excel, complete it, and then import the spreadsheet to OIA. It worked well for offline certification, but if the user accidentally altered the format of the spreadsheet, the import of the data could fail. We were close to a solution but it wasn’t reliable.Over the past few years, we've seen the proliferation of Apple iOS devices, specifically the iPhone and iPad, in the enterprise.  As our customers were asking for offline certification, we noticed the same population of users traditionally responsible for access certification, were early adopters of the iPad. The environment seemed ideal for us to create an iPad application to support offline certifications using Oracle Identity Analytics. That’s why we created IdentityCert™.IdentityCert allows users to view their analytics dashboard, complete user certifications, and resolve policy violations with OIA, from their iPads.The current IdentityCert analytics dashboard displays the same charts that are available in the Oracle Identity Analytics product. However, we plan to expand the number of available analytics in future releases.The main function of IdentityCert is user certification which can be performed quickly and efficiently using a simple touch interface. Managers tap into a certification, use simple gestures to claim users and certify their access.  Certifications can be securely downloaded to IdentityCert and can be completed with or without a network connection. The user can upload the completed certifications once they are connected to a cellular or wi-fi network.Oracle Identity Analytics can generate policy violation notifications based on detective scans of identity warehouse or via preventative analysis of identity access requests. IdentityCert allows users to view all policy violations, resolve, or delegate them to appropriate users. IdentityCert also analyzes the policy violation expression and produces more human friendly descriptions of the policy violation which improves the ability of users to resolve the violation. IdentityCert can be deployed quickly into a customer's environment. It is deployed with Hub City Media's ID Services to connect Oracle Identity Analytics securely with the iPad application.Oracle Identity Management 11g R2 is an important evolutionary release. Oracle's Identity Management suite has more characteristics of a cohesive platform. This platform provides an integrated set of identity services that can be used to protect, manage, and audit security within the enterprise. At HCM we take the platform concept a step further and see it as an opportunity to create unique solutions for Oracle Identity Management customers. IdentityCert is our commitment to this platform. You can download IdentityCert from the Apple iOS App Store today. It includes a demo dataset that you can use to explore the functions of the product without any server infrastructure. Download it. Give it a try. We would appreciate your interest and welcome any feedback.Resources:Press Release: Hub City Media Introduces iPad Application IdentityCert™ for Oracle Identity AnalyticsApp Store Download: http://bit.ly/IdentityCertOracle Identity Governance Suite

    Read the article

  • Love and Hate Outlook autocomplete, Outlook 2010/Exchange 2010

    - by Kay Sellenrode
    I think that almost every Exchange admin can concur with me that the Outlook autocomplete cache is one of those things you love but at the same time also hate. Users mostly love this function, except when it fails.Luckily since Outlook 2010 things got a little better and we got rid of the dreaded nk2 files.Outlook 2010 now includes a folder named "Suggested Contacts", all users you send an email to and that don't already have an contact object are saved in this suggested contacts folder.A lot of people thought this folder is also the source for the autocomplete cache, which would make it somewhat easy to manage, I wish the solution was that easy.Badly enough separate from the suggested contacts, outlook still maintains a cache for the autocomplete function. Let us say you run in to the following situation: John works for company A and is a popular contact for almost everyone in your organization.Now John quit his job at Company A and moved to Company B.Luckily John maintains your company as customer, but his email address is now changed from companyA.com to companyB.comSince you don't want to do any business with Company A anymore, you want to make sure none of your users accidentally mail to his old address.Now this is where the real fun starts, cause almost all of your 1000 users have mailed at least once with John.Resulting in the fact that every user has John most probably listed in their autocomplete cache.  I have run into sort like situations multiple times with several customers, which is always a pain.And of course this blog post is the result of one of those issues once again.I knew that with the Suggested contacts we could do more than previously, but still never spent time on it before.But today I thought lets nail this now and forever!!  Ok let's start of that things are different for every combination of outlook and exchange.I explain the procedure for Exchange 2010 SP1+ in combination with Outlook 2010.At first we want to get rid of all contact objects that contain [email protected] do this we need to be assigned to the RBAC role "Mailbox Import Export", which can be done through the Exchange Control panel.In my test environment I assigned this role to the Organization admins, but in real life you might want to add it to a custom role. Open the Exchange control panel by logging in to the ecp url, in my case https://ITFEX.itf.local/ECP, and make sure you selected your organization as management scope.Browse to Roles & Auditing, and open the properties for the organization management role group.click on the Add button to add a new role to the Organization Management role group, select the Mailbox Import Export role and click on add and OK to add it to the role.  Once you have assigned that role to your account you can open the Exchange Management Shell and execute the following command: Get-mailbox –resultsize unlimited | search-mailbox –targetmailbox "your.account" –targetfolder searchanddelete –loglevel full –logonly –searchquery "kind:contact AND [email protected]" This command will create a list with all mailboxes and any contacts that were found with an email address that contains [email protected], this list is then posted in the mailbox you specified at your.account in the folder searchanddelete.Now examine the report that was created and posted in the mailbox to see if it matches what you think it should match.My results looked like this:  When you're confident that the search includes all references and no false positives you can execute almost the same command, but this time with an delete action instead of the logonly. Get-mailbox –resultsize unlimited | search-mailbox –targetmailbox "your.account" –targetfolder searchanddelete –loglevel full –DeleteContent –searchquery "kind:contact AND [email protected]" Now most people would think this would remove the contact object from the suggested contacts, resulting in a removal from the autocomplete list.Sad but not true, to clean up the autocomplete list start Outlook with the command: "outlook /cleanautocompletecache" This will result in an empty cache, but luckily this is rebuild based on the suggested contacts, which now doesn't include the [email protected] contact anymore.

    Read the article

  • AZURE - Stairway To Heaven

    - by Waclaw Chrabaszcz
    Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2014/08/02/azure---stairway-to-heaven.aspx  Before you’ll start reading please start to play this song.   OK boys and girls, time get familiar with clouds. Time to become a meteorologist. To be honest I don’t know how to start. Is cloud better or worse than on campus resources … hmm … it is just different. I think for successful adoption in cloud world IT Dinosaurs need to forget some “Private Cloud” virtualization bad habits, and learn new way of thinking. Take a look: - I don’t need any  tapes or  CDs  (Physical Kingdom of Windows XP and 2000) - I don’t need any locally stored MP3s (CD virtualization :-) - I can just stream music to your computer no matter whether my on-site infrastructure is powered on. Why not to do exactly the same with WebServer, SQL, or just rented for a while Windows server ? Let’s go, to the other side of the mirror. 1st  - register yourself for free one month trial, as happy MSDN subscriber you’ve got monthly budget to spent. In addition in default setting your limit protects you against loosing real money, if your toys will consume too much traffic and space. http://azure.microsoft.com/en-us/pricing/free-trial/ Once your account is ready forget WebPortal, we are PowerShell knights. http://go.microsoft.com/?linkid=9811175&clcid=0x409 #Authenticate yourself in Azure Add-AzureAccount #download once your settings file Get-AzurePublishSettingsFile #Import it to your PowerShell Module Import-AzurePublishSettingsFile "C:\Azure\[filename].publishsettings" #validation Get-AzureAccount Get-AzureSubscription #where are Azure datacenters Get-AzureLocation #You will need it Update-Help #storage account is related to physical location, there are two datacenters on each continent, try nearest to you # all your VMs will store VHD files on your storage account #your storage account must be unique globally, so I assume that words account or server are already used New-AzureStorageAccount -StorageAccountName "[YOUR_STORAGE_ACCOUNT]" -Label "AzureTwo" -Location "West Europe" Get-AzureStorageAccount #it looks like you are ready to deploy first VM, what templates we can use Get-AzureVMImage | Select ImageName #what a mess, let’s choose Server 2012 $ImageName = (Get-AzureVMImage)[74].ImageName $cloudSvcName = '[YOUR_STORAGE_ACCOUNT]' $AdminUsername = "[YOUR-ADMIN]" $adminPassword = '[YOUR_PA$$W0RD]' $MediaLocation = "West Europe" $vmnameDC = 'DC01' #burn baby burn !!! $vmDC01 = New-AzureVMConfig -Name $vmnameDC -InstanceSize "Small" -ImageName $ImageName   `     | Add-AzureProvisioningConfig -Windows -Password $adminPassword -AdminUsername $AdminUsername   `     | New-AzureVM -ServiceName $cloudSvcName #ice, ice baby … Get-AzureVM Get-AzureRemoteDesktopFile -ServiceName "[YOUR_STORAGE_ACCOUNT]" -Name "DC01" -LocalPath "c:\AZURE\DC01.rdp" As you can see it is not just a new-VM, you need to associate your VM with AzureVMConfig (it sets your template), AzureProvisioningConfig (it sets your customizations), and Storage account. In next releases you’ll need to put this machine in specific subnet, attach a HDD and many more. After second reading I found that I am using the same name for STORAGE and SERVICE account, please be aware of it if you need to split these values. Conclusions: - pipe rules ! - at the beginning it is hard to change your mind and agree with fact that it is easier to remove and recreate a VM than move it to different subnet - by default everything is firewalled, limited access to DNS, but NATed outside on custom ports. It is good to check these translations sometimes on the webportal. - if you remove your VMs your harddrives remains on storage and MS will charge you . Remove-AzureVM -DeleteVHD For me AZURE it is a lot of fun, once again I can be newbie and learn every page. For me Azure offers real freedom in deployment of VMs without arguing with NetAdmins, WinAdmins, DBAs, PMs and other Change Managers. Unfortunately soon or later they will come to my haven and change it into …

    Read the article

  • Deploying an SSL Application to Windows Azure &ndash; The Dark Secret

    - by ToStringTheory
    When working on an application that had been in production for some time, but was about to have a shopping cart added to it, the necessity for SSL certificates came up.  When ordering the certificates through the vendor, the certificate signing request (CSR) was generated through the providers (http://register.com) web interface, and within a day, we had our certificate. At first, I thought that the certification process would be the hard part…  Little did I know that my fun was just beginning… The Problem I’ll be honest, I had never really secured a site before with SSL.  This was a learning experience for me in the first place, but little did I know that I would be learning more than the simple procedure.  I understood a bit about SSL already, the mechanisms in how it works – the secure handshake, CA’s, chains, etc…  What I didn’t realize was the importance of the CSR in the whole process.  Apparently, when the CSR is created, a public key is created at the same time, as well as a private key that is stored locally on the PC that generated the request.  When the certificate comes back and you import it back into IIS (assuming you used IIS to generate the CSR), all of the information is combined together and the SSL certificate is added into your store. Since at the time the certificate had been ordered for our site, the selection to use the online interface to generate the CSR was chosen, the certificate came back to us in 5 separate files: A root certificate – (*.crt file) An intermediate certifcate – (*.crt file) Another intermediate certificate – (*.crt file) The SSL certificate for our site – (*.crt file) The private key for our certificate – (*.key file) Well, in case you don’t know much about Windows Azure and SSL certificates, the first thing you should learn is that certificates can only be uploaded to Azure if they are in a PFX package – securable by a password.  Also, in the case of our SSL certificate, you need to include the Private Key with the file.  As you can see, we didn’t have a PFX file to upload. If you don’t get the simple PFX from your hosting provider, but rather the multiple files, you will soon find out that the process has turned from something that should be simple – to one that borders on a circle of hell… Probably between the fifth and seventh somewhere… The Solution The solution is to take the files that make up the certificates chain and key, and combine them into a file that can be imported into your local computers store, as well as uploaded to Windows Azure.  I can not take the credit for this information, as I simply researched a while before finding out how to do this. Download the OpenSSL for Windows toolkit (Win32 OpenSSL v1.0.1c) Install the OpenSSL for Windows toolkit Download and move all of your certificate files to an easily accessible location (you'll be pointing to them in the command prompt, so I put them in a subdirectory of the OpenSSL installation) Open a command prompt Navigate to the folder where you installed OpenSSL Run the following command: openssl pkcs12 -export –out {outcert.pfx} –inkey {keyfile.key}      –in {sslcert.crt} –certfile {ca1.crt} –certfile (ca2.crt) From this command, you will get a file, outcert.pfx, with the sum total of your ssl certificate (sslcert.crt), private key {keyfile.key}, and as many CA/chain files as you need {ca1.crt, ca2.crt}. Taking this file, you can then import it into your own IIS in one operation, instead of importing each certificate individually.  You can also upload the PFX to Azure, and once you add the SSL certificate links to the cloud project in Visual Studio, your good to go! Conclusion When I first looked around for a solution to this problem, there were not many places online that had the information that I was looking for.  While what I ended up having to do may seem obvious, it isn’t for everyone, and I hope that this can at least help one developer out there solve the problem without hours of work!

    Read the article

  • Web Application Integration Steps in OAM 11gR2 (High Level)

    - by Venkata Srikanth
    Install OAM, Webtier (OHS) and WebGate as per the standard installation steps. Create a WebGate instance (i.e deploy WebGate) A WebGate instance must be created that will copy required bits of agent from WEBGATE_HOME to WebGate instance location that shares the same INSTANCE_HOME with OHS ./deployWebGateInstance.sh –w /Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 Note: Here –w flag indicates OHS instance folder and –oh indicates the WebGate Oracle home Configure WebGate In the webgate configuration the EditHttpdConf utility will copy OUI instantiated apache_webgate.template from WEBGATE_HOME to webgate instance location (renamed to webgate.conf), and update httpd.conf with one additional line to include webgate.conf. export LD_LIBRARY_PATH=$ LD_LIBRARY_PATH:/Oracle/Middleware/Oracle_WT1/lib Navigate to /Oracle/Middleware/Oracle_OAMWebGate1/webgate/ohs/tools/setup/InstallTools ./EditHttpdConf –w /Oracle/Middleware/Oracle_WT1/instances/instace1/config/OHS/ohs1 –oh /Oracle/Middleware/Oracle_OAMWebGate1 –o webgate.conf Register WebGate Use RREG tool to register the OAM 11G WebGate Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/input Edit OAM11Grequest.xml. Change the specific xml content to include the weblogic admin URL, agentBaseURL, host identifier etc.. Navigate to /Oracle/Middleware/Oracle_IDM1/oam/server/rreg/bin Set permissions to oamreg.sh à chmod 777 oamreg.sh Edit oamreg.sh and set OAM_REG_HOME=/Oracle/Middleware/Oracle_IDM1/oam/server/rreg ./oamreg.sh inband input/OAM11Grequest.xml Enter the WebLogic admin credentials when prompted. After performing the above steps, there will be two artifcats created under Oracle/Middleware/Oracle_IDM1/oam/server/rreg/output, namely ObAccessClient.xml (Stroing webgate config parameters) and cwallet.sso (storing the agent key). These files must be copied to WebGate instance config folder (/Oracle/Middleware/Oracle_WT1/instances/instance1/config/ohs1/webgate/config) Restart OHS Deploy the web application (myApp) in WebLogic application server Proxy Configuration in OHS The mod_wl_ohs module enables requests to be proxied from Oracle HTTP Server 11g to Oracle WebLogic Server. Navigate to /Oracle/Middleware/Oracle_WT1/instances/instance1/config/OHS/ohs1 Edit mod_wl_ohs.conf file to include the following: <IfModule weblogic_module> WebLogicHost <WEBLOGIC_HOST> WebLogicPort <WEBLOGIC_PORT> # Debug ON # WLLogFile /tmp/weblogic.log MatchExpression *.jsp </IfModule> <Location /myApp> SetHandler weblogic-handler # PathTrim /weblogic # ErrorPage http:/WEBLOGIC_HOME:WEBLOGIC_PORT/ </Location> Note: Here WEBLOGIC_HOST and WEBLOGIC_PORT are the WebLogic admin server host and port respectively Restart OHS. Now if we access the web application URL with OHS host and port (Ex: http://OHS_HOST:<OHS_PORT>/myApp) so that the requests will be proxied to WebLogic server. Create a new application domain Login to OAM Admin Console Navigate to Shared Componentsà Authentication Schemesà Create Authentication Scheme (Ex: LDAP Auth Scheme. Here the scheme is assoicated with LDAP Authentication Module) Navigate to Policy Configuration à Application Domain à Create Application Domain Enter the Application Domain Name and Click Apply. Navigate to Resources tab and add the resource urls (Web Application URLs that needs to be protected) Navigate to Authentication Policy tab à Create a new authentication ploicy by providing the Resource URLs (The sample Web Application URLs) and Authentication Scheme. Navigate to Authorization Policy tab à Create a new authorization policy à Enter authorization policy name and navigate to Resource Tab à Attach the Reource URL, Host Identifiers here. Navigate to Conditions tab à Add the conditions like whom to allow and whom to deny access. Navigate to Rules tab à Crate the Allow Rule and Deny Rule with the available conditions from the previous step so that the Authorization Policy may authorize the logins. Navigate to Resources tab and attach the Authentication and Authorization plocies created in the above steps. Test the Web Application Integration.

    Read the article

  • Developer Training – 6 Online Courses to Learn SQL Server, MySQL and Technology

    - by Pinal Dave
    Video courses are the next big thing and I am so happy that I have so far authored 6 different video courses with Pluralsight. Here is the list of the courses. I have listed all of my video courses over here. Note: If you click on the courses and it does not open, you need to login to Pluralsight with a valid username and password or sign up for a FREE trial. Please leave a comment with your favorite course in the comment section. Random 10 winners will get surprise gift via email. Bonus: If you list your favorite module from the course site. SQL Server Performance: Introduction to Query Tuning SQL Server performance tuning is an in-depth topic, and an art to master. A key component of overall application performance tuning is query tuning. Writing queries in an efficient manner, and making sure they execute in the most optimal way possible, is always a challenge. The basics revolve around the details of how SQL Server carries out query execution, so the optimizations explored in this course follow along the same lines. Click to View Course SQL Server Performance: Indexing Basics Indexes are the most crucial objects of the database. They are the first stop for any DBA and Developer when it is about performance tuning. There is a good side as well evil side of the indexes. To master the art of performance tuning one has to understand the fundamentals of the indexes and the best practices associated with the same. This course is for every DBA and Developer who deals with performance tuning and wants to use indexes to improve the performance of the server. Click to View Course SQL Server Questions and Answers This course is designed to help you better understand how to use SQL Server effectively. The course presents many of the common misconceptions about SQL Server, and then carefully debunks those misconceptions with clear explanations and short but compelling demos, showing you how SQL Server really works. This course is for anyone working with SQL Server databases who wants to improve her knowledge and understanding of this complex platform. Click to View Course MySQL Fundamentals MySQL is a popular choice of database for use in web applications, and is a central component of the widely used LAMP open source web application software stack. This course covers the fundamentals of MySQL, including how to install MySQL as well as written basic data retrieval and data modification queries. Click to View Course Building a Successful Blog Expressing yourself is the most common behavior of humans. Blogging has made easy to express yourself. Just like a letter or book has a structure and formula, blogging also has structure and formula. In this introductory course on blogging we will go over a few of the basics of blogging and show the way to get started with blogging immediately. If you already have a blog, this course will be even more relevant as this will discuss many of the common questions and issue you face in your blogging routine. Click to View Course Introduction to ColdFusion ColdFusion is rapid web application development platform. In this course you will learn the basics of how to use ColdFusion platform and rapidly develop web sites. The course begins with learning basics of ColdFusion Markup Language and moves to common development language practices. From there we move to frequent database operations and advanced concepts of Forms, Sessions and Cookies. The last module sums up all the concepts covered in the course with sample application. Click to View Course Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

    Read the article

  • Swap not available on System Monitor

    - by Zaki
    I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

    Read the article

  • Oracle Tutor: XPDL conversion (and why you should care)

    - by mary.keane
    You may have noticed that the Oracle Business Process Converter feature in Tutor 14 supports "XPDL" conversion to Oracle Business Process Analysis Suite (BPA), Oracle Business Process Management Suite (BPM), and Oracle Tutor, and you may have briefly wondered "what is XPDL?" before you moved on to the Visio import feature (a very popular feature in Tutor 14). This posting is for those who do not yet understand (or care) about XPDL and process modeling. Many of us (and I'm including myself) have spent years working in the process definition arena: we've written procedures, designed systems and software to help others write procedures, and have been responsible for embedding policies and procedures into training material for employees. We've worked with tools such as Oracle Tutor, Microsoft Visio, Microsoft Word, and UPK. Most of us have never worked with "modeling tools" before, and we certainly never had to understand BPMN. It's a brave new world in this arena, and companies desperately need people with policy and procedural system expertise to be able to work with system analysts so there is a seamless transfer of knowledge from IT to employees. When working with applications, a picture is worth a thousand words, so eventually you're going to need to understand and be able to work with business process models. XPDL is an acronym for XML Process Definition Language, and it is an interchange format for business process models. It allows you to take a BPMN model that was developed in one workflow application such as BizAgi and import it into another workflow application or a true BPMN management system such as Oracle BPM. Specifically, the XPDL format contains the graphical information of a model as well as any executable information. By using a common format, models can be moved from a basic modeling application used by business owners to applications used by system architects. Over 80 applications support the XPDL format, including MetaStorm ProVision, BEA ALBPM, BizAgi, and Tibco. I mention these applications because we have provided XSLT mapping files specifically for these vendors. Oracle Business Process Converter was designed with user extensibility in mind, and thus users can add their own XML files so that additional XPDL models from other vendors can be converted to BPM, BPA, and Oracle Tutor. Instructions on how to add your own files can be found in Appendix 4 of the Oracle Business Converter manual. Let's take a visual look at how this works. Here is an example of a model devloped in BizAgi: This model can be created by the average business user without a large learning curve, and it's a good start for the system analyst who will be adding web services as well as for the business manager who manages the process described in the model. By exporting this model as XPDL, the information can be converted into Oracle BPA and Oracle BPM as well as converted to Oracle Tutor to become the framework for a procedure. Through this conversion feature, one graphic illustration of a business process can be used by a system analyst, business analyst, business manager, and employee, as seen below. Model Converted to Tutor Procedure Below is the task section of the procedure after conversion from an XPDL file. Model converted to BPA Model converted to BPM End users still want step by step instructions on how to perform their jobs, so procedures (Oracle Tutor) and application simulations (UPK) are still a critical piece of the solution. But IT professionals need graphic descriptions of how the applications work, regardless of whether there are any tasks involving humans. Now there is a way to convert procedures (Oracle Tutor docx files) and basic models (XPDL files) so that business managers and system analysts can share process information. References Wikipedia XPDL. Workflow Management Coalition, XPDL Support and Resources Oracle Business Process Converter manual, Oracle Tutor 14 Oracle Business Process Management 11g If you have any XPDL conversion stories to share, we'd love to hear from you. Best wishes for the coming new year, Mary Keane, Senior Development Manager, Oracle Tutor and BPM

    Read the article

  • Moving monarchs and dragons: migrating the JDK bugs to JIRA

    - by darcy
    Among insects, monarch butterflies and dragonflies have the longest migrations; migrating JDK bugs involves a long journey as well! As previously announced by Mark back in March, we've been working according to a revised plan to transition the JDK bug management from Sun's legacy system to initially an Oracle-internal JIRA instance which is afterward made visible and usable externally. I've been busily working on this project for the last few months and the team has made good progress on many aspects of the effort: JDK bugs will be imported into JIRA regardless of age; bugs will also be imported regardless of state, including closed bugs. Consequently, the JDK bug project will start pre-populated with over 100,000 existing bugs, some dating all the way back to 1994. This will allow a continuity of information and allow new issues to be linked to old ones. Using a custom import process, the Sun bug numbers will be preserved in JIRA. For example, the Sun bug with bug number 4040458 will become "JDK-4040458" in JIRA. In JIRA the project name, "JDK" in our case, is part of the bug's identifier. Bugs created after the JIRA migration will be numbered starting at 8000000; bugs imported from the legacy system have numbers ranging between 1000000 and 79999999. We're working with the bugs.sun.com team to try to maintain continuity of the ability to both read JDK bug information as well as to file new incidents. At least for now, the overall architecture of bugs.sun.com will be the same as it is today: it will be a gateway bridging to an Oracle-internal system, but the internal system will change to JIRA from the legacy database. Generally we are aiming to preserve the visibility of bugs currently viewable on bugs.sun.com; however, bugs in areas not related to the JDK will not be visible after the transition to JIRA. New incoming incidents will be sent to a separate JIRA project for initial triage before possibly being moved into the JDK project. JDK bug management leans heavily on being able to track the state of bugs in multiple releases, especially to coordinate delivering synchronized security releases (known as CPUs, critital patch updates, in Oracle parlance). For a security release, it is common for half a dozen or more release trains to be affected (for example, JDK 5, JDK 6 update, OpenJDK 6, JDK 7 update, JDK 8, virtual releases for HotSpot express, etc.). We've determined we need to track at least the tuple of (release, responsible engineer/assignee for the release, status in the release) for the release trains a fix is going into. To do this in JIRA, we are creating a separate port/backport issue type along with a custom link type to allow the multiple release information to be easily grouped and presented together. The Sun legacy system had a three-level classification scheme, product, category, and subcategory. Out of the box, JIRA only has a one-level classification, component. We've implemented a custom second-level classification, subcomponent. As part of the bug migration we've taken the opportunity to think about how bugs should be grouped under a two-level system and we'll the new system will be simpler and more regular. The main top-level components of the JDK product will include: core-libs client-libs deploy install security-libs other-libs tools hotspot For the libs areas, the primary name of the subcomportment will be the package of the API in question. In the core-libs component, there will be subcomponents like: java.lang java.lang.class_loading java.math java.util java.util:i18n In the tools component, subcomponents will primarily correspond to command names in $JDK/bin like, jar, javac, and javap. The first several bulk imports of the JDK bugs into JIRA have gone well and we're continuing to refine the import to have greater fidelity to the current data, including by reconstructing information not brought over in a structured fashion during the previous large JDK bug system migration back in 2004. We don't currently have a firm timeline of when the new system will be usable externally, but as it becomes available, I'll share further information in follow-up blog posts.

    Read the article

  • Creating a Corporate Data Hub

    - by BuckWoody
    The Windows Azure Marketplace has a rich assortment of data and software offerings for you to use – a type of Software as a Service (SaaS) for IT workers, not necessarily for end-users. Among those offerings is the “Data Hub” – a  codename for a project that ironically actually does what the codename says. In many of our organizations, we have multiple data quality issues. Finding data is one problem, but finding it just once is often a bigger problem. Lots of departments and even individuals have stored the same data more than once, and in some cases, made changes to one of the copies. It’s difficult to know which location or version of the data is authoritative. Then there’s the problem of accessing the data. It’s fairly straightforward to publish a database, share or other location internally to store the data. But then you have to figure out who owns it, how it is controlled, and pass out the various connection strings to those who want to use it. And then you need to figure out how to let folks access the internal data externally – bringing up all kinds of security issues. Finally, in many cases our user community wants us to combine data from the internally sources with external data, bringing up the security, strings, and exploration features up all over again. Enter the Data Hub. This is an online offering, where you assign an administrator and data stewards. You import the data into the service, and it’s available to you - and only you and your organization if you wish. The basic steps for this service are to set up the portal for your company, assign administrators and permissions, and then you assign data areas and import data into them. From there you make them discoverable, and then you have multiple options that you or your users can access that data. You’re then able, if you wish, to combine that data with other data in one location. So how does all that work? What about security? Is it really that easy? And can you really move the data definition off to the Subject Matter Experts (SME’s) that know the particular data stack better than the IT team does? Well, nothing good is easy – but using the Data Hub is actually pretty simple. I’ll give you a link in a moment where you can sign up and try this yourself. Once you sign up, you assign an administrator. From there you’ll create data areas, and then use a simple interface to bring the data in. All of this is done in a portal interface – nothing to install, configure, update or manage. After the data is entered in, and you’ve assigned meta-data to describe it, your users have multiple options to access it. They can simply use the portal – which actually has powerful visualizations you can use on any platform, even mobile phones or tablets.     Your users can also hit the data with Excel – which gives them ultimate flexibility for display, all while using an authoritative, single reference for the data. Since the service is online, they can do this wherever they are – given the proper authentication and permissions. You can also hit the service with simple API calls, like this one from C#: http://msdn.microsoft.com/en-us/library/hh921924  You can make HTTP calls instead of code, and the data can even be exposed as an OData Feed. As you can see, there are a lot of options. You can check out the offering here: http://www.microsoft.com/en-us/sqlazurelabs/labs/data-hub.aspx and you can read the documentation here: http://msdn.microsoft.com/en-us/library/hh921938

    Read the article

  • Need WIF Training?

    - by Your DisplayName here!
    I spend numerous hours every month answering questions about WIF and identity in general. This made me realize that this is still quite a complicated topic once you go beyond the standard fedutil stuff. My good friend Brock and I put together a two day training course about WIF that covers everything we think is important. The course includes extensive lab material where you take standard application and apply all kinds of claims and federation techniques and technologies like WS-Federation, WS-Trust, session management, delegation, home realm discovery, multiple identity providers, Access Control Service, REST, SWT and OAuth. The lab also includes the latest version of the thinktecture identityserver and you will learn how to use and customize it. If you are looking for an open enrollment style of training, have a look here. Or contact me directly! The course outline looks as follows: Day 1 Intro to Claims-based Identity & the Windows Identity Foundation WIF introduces important concepts like conversion of security tokens and credentials to claims, claims transformation and claims-based authorization. In this module you will learn the basics of the WIF programming model and how WIF integrates into existing .NET code. Externalizing Authentication for Web Applications WIF includes support for the WS-Federation protocol. This protocol allows separating business and authentication logic into separate (distributed) applications. The authentication part is called identity provider or in more general terms - a security token service. This module looks at this scenario both from an application and identity provider point of view and walks you through the necessary concepts to centralize application login logic both using a standard product like Active Directory Federation Services as well as a custom token service using WIF’s API support. Externalizing Authentication for SOAP Services One big benefit of WIF is that it unifies the security programming model for ASP.NET and WCF. In the spirit of the preceding modules, we will have a look at how WIF integrates into the (SOAP) web service world. You will learn how to separate authentication into a separate service using the WS-Trust protocol and how WIF can simplify the WCF security model and extensibility API. Day 2 Advanced Topics:  Security Token Service Architecture, Delegation and Federation The preceding modules covered the 80/20 cases of WIF in combination with ASP.NET and WCF. In many scenarios this is just the tip of the iceberg. Especially when two business partners decide to federate, you usually have to deal with multiple token services and their implications in application design. Identity delegation is a feature that allows transporting the client identity over a chain of service invocations to make authorization decisions over multiple hops. In addition you will learn about the principal architecture of a STS, how to customize the one that comes with this training course, as well as how to build your own. Outsourcing Authentication:  Windows Azure & the Azure AppFabric Access Control Service Microsoft provides a multi-tenant security token service as part of the Azure platform cloud offering. This is an interesting product because it allows to outsource vital infrastructure services to a managed environment that guarantees uptime and scalability. Another advantage of the Access Control Service is, that it allows easy integration of both the “enterprise” protocols like WS-* as well as “web identities” like LiveID, Google or Facebook into your applications. ACS acts as a protocol bridge in this case where the application developer doesn’t need to implement all these protocols, but simply uses a service to make it happen. Claims & Federation for the Web and Mobile World Also the web & mobile world moves to a token and claims-based model. While the mechanics are almost identical, other protocols and token types are used to achieve better HTTP (REST) and JavaScript integration for in-browser applications and small footprint devices. Also patterns like how to allow third party applications to work with your data without having to disclose your credentials are important concepts in these application types. The nice thing about WIF and its powerful base APIs and abstractions is that it can shield application logic from these details while you can focus on implementing the actual application. HTH

    Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >