Search Results

Search found 37931 results on 1518 pages for 'computer case'.

Page 289/1518 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• Leadership does not see value in standard process for machine configuration and new developer orientation

  - by opensourcechris

  About 3 months ago our lead web developer and designer(same person) left the company, greener pastures was the reason for leaving. Good for them I say. My problem is that his department was completely undocumented. Things have been tough since the lead left, there is a lot of knowledge both theoretical knowledge we use to quote new projects and technical/implementation knowledge of our existing products that we have lost as a result of his departure. My normal role is as a product manager (for our products themselves) and as a business analyst for some of our project based consulting work. I've taught myself to code over the past year and in an effort to continue moving forward I've taken on the task of setting my laptop up as a development machine with hopes of implementing some of the easier feature requests and fixing some of the no brainer bugs that get submitted into our ticketing system. But, no one knows how to take a fresh Windows machine and configure it to work seamlessly with our production apps. I have requested my boss, who is still in contact with the developer who left, ask them to document and create a process to onboard a new developer, software installation, required packages, process to deploy to the productions application servers, etc. None of this exists, and I'm spinning my wheels trying to get my computer working as a functional development machine. But she does not seem to understand the need for such a process to exist. Apparently the new developer who replaced the one who left has been using a machine that was pre-configured for our environment, so even the new developer could not set up a new machine if we added another developer. My question is two part: Am I wrong in assuming a process to on-board and configure a new computer to be part of our development eco-system should exist? Am I being a whinny baby and should I figure the process out and create a document on my own?

  Read the article

• What You Said: How You Track Your Time

  - by Jason Fitzpatrick

  Earlier this week we asked you to share your favorite time tracking tips, tricks, and tools. Now we’re back to highlight the techniques HTG readers use to keep tabs on their time. While more than one of you expressed confusion over the idea of tracking how you spend all your time, many of you were more than happy to share the reasons for and the methods you use to stay on top of your time expenditures. Scott uses a fluid and flexible project management tool: I use kanbanflow.com, with two boards to manage task prioritisation and backlog. One board called ‘Current Work’ has three columns ‘Do Today’, ‘In Progress’ and ‘Done’. The other is called ‘Backlog’, which splits tasks into priority groups – ‘Distractions (NU+NI)’, ‘Goals (NU+I)’, ‘Interruptions (U+NI)’, ‘Interruptions (U+NI)’ and ‘Critical (U+I)’, where U is Urgent and I is Important (and N is Not). At the end of each day, I move things from my Backlog to my ‘Current Work’ board, with the idea to keep complete Goals before they become Critical. That way I can focus on ‘Current Work’ Do Today so I don’t feel overwhelmed and can plan my day. As priorities change or interruptions pop up, it’s just a matter of moving tasks between boards. I have both tabs open in my browser all day – this is probably good for knowledge workers strapped to their desk, not so good for those in meetings all day. In that case, go with the calendar on your phone. While the above description might make it sound really technical, we took the cloud-based app for a spin and found the interface to be very flexible and easy to use. Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked

  Read the article

• Internet connection sharing between Windows XP and Windows 7

  - by Dave

  I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

  Read the article

• How to deal with colleagues refuse to follow practices?

  - by Adrian Shum

  I was discussing with another colleague about what we should be used when an DB entity is referring to another. I don't think there is any good reason to break the practice of putting the Primary Key in the referring entity. However, one of my colleague says: "You should use a surrogate key in the entity, but it is better to put the human-readable natural key in the referring entity. As long it is unique, it is fine and it is easier when you are doing support or maintenance job" I know it will works, but obviously it is not a good practice you are putting a non-PK unique column as "foreign key", just for gaining a bit of ease in writing SQL during support as we can have less table join. Though I mentioned the his approach is conceptual incorrect, and causing problem too practically etc, he seems rather trade off correctness in data model in exchange of ease of maintenance. And he said: "I know it is not good practice, but good practice is not golden rule" Honestly I feel frustrated when dealing with something like this. I know there are always case that we should break some rule or practice, but doubtless it is not such case now. What will you when you are facing situation like this? Please assume yourself being a senior developer which is expected to contribute in misc development direction and convention.

  Read the article

• Apache 2 Symbolic link not allowed or link target not accessible

  - by djechelon

  While the title of this question matches an already asked question, in my case I already set Options +FollowSymLinks. The setup is the following: my hosting setup includes htdocs/ directory that is the default document root for HTTP websites and htdocs-secure that is for HTTPS. They are meant for sites that need a different HTTPS version. In case both share the same files I create a link from htdocs-secure to htdocs by ln -s htdocs htdocs-secure but here comes the problem! Log still says Symbolic link not allowed or link target not accessible: /path/to/htdocs-secure Vhost fragment Header always set Strict-Transport-Security "max-age=500" DocumentRoot /path/to/htdocs-secure <Directory "/path/to/htdocs-secure"> allow from all Options +FollowSymLinks </Directory> I think it's a correct setup. The HTTP version of the site is accessible, so it doesn't look like a permission problem. How to fix this? [Add] other info: I use MPM-itk and I set AssignUserId to the owner/group of both the directories

  Read the article

• How should a developer reject impossible requirements?

  - by sugar

  Here's the problem I'm facing: Quote From Project Manager: Hey Sugar, I'm assigning you the task of developing a framework that could be used for many different iOS applications. Here are the requirements: It should be able to detect the thickness of the thumb or fingers being used to manipulate the UI. With this information, all elements of the UI should be arranged & sized automatically. For a larger thumb, elements should be arranged nearer the center of the screen. For a smaller thumb, elements should be arranged nearer the corners of the screen. For a larger thumb, all fonts should be smaller. (We're assuming an adult in this case.) For a smaller thumb, all fonts should be larger. (We're assuming a younger person in this case.) Summary: This framework is required for creating user-friendly user interfaces programmatically. The framework should be developed in such a way that we can use for as many projects as needed, so it must also be very developer-friendly. I am the developer given this task, so my questions are as follows: How can I explain that these requirements are a little ridiculous? How can I explain that it would be better to concentrate on developing actual projects? How can I explain that even if this were possible, I wouldn't recommended developing such a thing? How do I say NO to this project politely, gently, and respectfully? How can I explain that even for a developer with 3 years of experience, this might not be possible?

  Read the article

• Logging library for (c++) games

  - by Klaim

  I know a lot of logging libraries but didn't test a lot of them. (GoogleLog, Pantheios, the coming boost::log library...) In games, especially in remote multiplayer and multithreaded games, logging is vital to debugging, even if you remove all logs in the end. Let's say I'm making a PC game (not console) that needs logs (multiplayer and multithreaded and/or multiprocess) and I have good reasons for looking for a library for logging (like, I don't have time or I'm not confident in my ability to write one correctly for my case). Assuming that I need : performance ease of use (allow streaming or formating or something like that) reliable (don't leak or crash!) cross-platform (at least Windows, MacOSX, Linux/Ubuntu) Wich logging library would you recommand? Currently, I think that boost::log is the most flexible one (you can even log to remotely!), but have not good performance update: is for high performance, but isn't released yet. Pantheios is often cited but I don't have comparison points on performance and usage. I've used my own lib for a long time but I know it don't manage multithreading so it's a big problem, even if it's fast enough. Google Log seems interesting, I just need to test it but if you already have compared those libs and more, your advice might be of good use. Games are often performance demanding while complex to debug so it would be good to know logging libraries that, in our specific case, have clear advantages.

  Read the article

• Stop VLC player from saving effects & filter settings

  - by bocamax

  VLC Player v1.1.11 Windows 7 Ultimate VLC player launches each new video with setting I used once to brighten a dark video. On a second computer, VLC player opens all videos rotated 270 which was a feature I used once. I now have to manually uncheck Image adjust on one computer & uncheck Transform on another for each video to have it play without these custom settings. I've custom mapped VLC Hotkeys that I use extensively. As a result, I do not want to "reset preferences" and lose my Hotkey mapping. VLC Tools Settings Video Effects Basic Image Adjust (Brightness, Contrast, etc.) VLC Tools Settings Video Effects Basic Transform (Rotate 90, 180, 270) Is there a setting I'm not finding to stop VLC from applying a one time adjustment to all videos?

  Read the article

• (simple) linux HA with vmware vsphere?

  - by derhelge

  I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

  Read the article

• Multi language site - use of canonical link and link rel="alternate"

  - by julia

  I keep reading everywhere that if you have a multilanguage site, where the same page appears in, say, French and English, then this is considered as duplicate content by google. It is written that using canonical link is the solution, but I do not understand how to use it in this case. Should I: Choose either French URL or English URL to be the canonical (main) one, and where I will place the canonical link? If so, how do I decide which of the two URLs must be canonical? both languages are important to me and I want the content under both languages to be indexed by google and served to the user, depending on the language in which he searches. OR should I place a canonical link on both French and English URLs? If so, then I do not understand the meaning of using the canonical link? In this case would both URLs be indexed, are both of them considered as "important" by google and not duplicates? Also I read that link rel="alternate" can be used to indicate to google that, for example the French URL is the French-language equivalent of the English page. This makes sense and I understand how to use such links, but how are they combined with canonical links? Should I define both the canonical URL AND specify rel="alternate" in both URLs? Could someone help me to clarify this, cause I'm stuck with this and can't seem to find a good-enough explanation in different sources.

  Read the article

• Windows 7 System process reading/writing like crazy

  - by Mats Ekberg

  I have a problem that my windows 7 computer sometimes starts accessing the disk like crazy for maybe 10 minutes at a time. The process in question is the "system" process. I have disabled superfetch and hibernation on my computer, if that makes any difference. I disabled those to see if they were the cause of the problems, but no change. I have 6 GB of RAM and only the web browser was started when I took the screenshot, so I don't think it was thrashing due to page faults. Any ideas on how to find the cause of this?

  Read the article

• Optimizing lifestyle and training

  - by Gabe

  I am a college freshman who has recently discovered a passion for computer science. Having had my first lick of formal python training last semester, I have cast aside my previously hedonist way of life and tunneled my sights on becoming the most rounded and proficient programmer I can be. I know that I'm taking strides in the right direction (I've stopped smoking, I've been exercising every day, I've taught myself C++ and OpenGL, and I've begun training in kung-fu and meditation), yet I am still finding myself struggling to achieve satisfactory results. I would like to be able to spend a good 3-4 hours every day burning through textbooks. I have the time cleared and the resources allocated. The problem lies in the logistics-- I have never taken anything seriously before. Recently I've realized that I am clueless when it comes to taking care of myself and gaining control of my mind, and it drastically hinders my productivity. My question is this: How can I learn to manage my time and take care of myself such that I can spend the maximum amount of time every day studying with steady concentration? Personal tricks would be key here: techniques you use to get yourself to sleep, a diet that yields focus, even computer break stretching routines or active reading techniques. Anything you could think of here would be great. I was a low-life in high school and I have the drive to turn my life around, I'm just quite a bit behind in the way of good habits :)

  Read the article

• Mac Book Refuses to Boot

  - by pas09

  I have a Macbook that has unfortunately died on me. I randomly got a pop up message that said I needed to restart my computer, and once I did, I was greeted with the blinking folder question mark start up screen. I've tried everything, including running Disk Utility repair and reformatting the hard drive and reinstalling OS X. All of my data is backed up and safe, I just need my computer to start again. Before I go off and buy a new hard drive, I wanted to see if there is anything I might have forgotten.

  Read the article

• Permission based Authorization vs. Role based Authorization - Best Practices - 11g

  - by Prakash Yamuna

  In previous blog posts here and here I have alluded to the support in OWSM for Permission based authorization and Role based authorization support. Recently I was having a conversation with an internal team in Oracle looking to use OWSM for their Web Services security needs and one of the topics was around - When to use permission based authorization vs. role based authorization? As in most scenarios the answer is it depends! There are trade-offs involved in using the two approaches and you need to understand the trade-offs and you need to understand which trade-offs are better for your scenario. Role based Authorization: Simple to use. Just create a new custom OWSM policy and specify the role in the policy (using EM Fusion Middleware Control). Inconsistent if you have multiple type of resources in an application (ex: EJBs, Web Apps, Web Services) - ex: the model for securing EJBs with roles or the model for securing Web App roles - is inconsistent. Since the model is inconsistent, tooling is also fairly inconsistent. Achieving this use-case using JDeveloper is slightly complex - since JDeveloper does not directly support creating OWSM custom policies. Permission based Authorization: More complex. You need to attach both an OWSM policy and create OPSS Permission authorization policies. (Note: OWSM leverages OPSS Permission based Authorization support). More appropriate if you have multiple type of resources in an application (ex: EJBs, Web Apps, Web Services) and want a consistent authorization model. Consistent Tooling for managing authorization across different resources (ex: EM Fusion Middleware Control). Better Lifecycle support in terms of T2P, etc. Achieving this use-case using JDeveloper is slightly complex - since JDeveloper does not directly support creating/editing OPSS Permission based authorization policies.

  Read the article

• Excel 2003 Freezes When Worksheet with PivotTable Selected

  - by Max

  All of the sudden, my Excel 2003 began an odd behavior today. Whenever I click on a worksheet tab that has a PivotTable on it, I become unable to click on any other tabs or on the menu with the options to minimize, maximize, and size at the top left of the worksheet window. I am left unable to click on the other tabs until I double-click inside a cell in the PivotTable worksheet and get a blinking curor as if to type. Then, I can navigate to other tabs normally. I can't think of any major changes I have made to my computer in the last day that would have caused this. I did instiall PC Tools antivirus over a week ago, and since that time have noticed my computer behaving in odd ways, but excel has been just fine until now. Does anyone have any thoughts on what might cause this? Thanks so much.

  Read the article

• White Screen of Death

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen.

  Read the article

• Clipping polygons in XNA with stencil (not using spritebatch)

  - by Blau

  The problem... i'm drawing polygons, in this case boxes, and i want clip children polygons with its parent's client area. // Class Region public void Render(GraphicsDevice Device, Camera Camera) { int StencilLevel = 0; Device.Clear( ClearOptions.Stencil, Vector4.Zero, 0, StencilLevel ); Render( Device, Camera, StencilLevel ); } private void Render(GraphicsDevice Device, Camera Camera, int StencilLevel) { Device.SamplerStates[0] = this.SamplerState; Device.Textures[0] = this.Texture; Device.RasterizerState = RasterizerState.CullNone; Device.BlendState = BlendState.AlphaBlend; Device.DepthStencilState = DepthStencilState.Default; Effect.Prepare(this, Camera ); Device.DepthStencilState = GlobalContext.GraphicsStates.IncMask; Device.ReferenceStencil = StencilLevel; foreach ( EffectPass pass in Effect.Techniques[Technique].Passes ) { pass.Apply( ); Device.DrawUserIndexedPrimitives<VertexPositionColorTexture>( PrimitiveType.TriangleList, VertexData, 0, VertexData.Length, IndexData, 0, PrimitiveCount ); } foreach ( Region child in ChildrenRegions ) { child.Render( Device, Camera, StencilLevel + 1 ); } Effect.Prepare( this, Camera ); // This does not works Device.BlendState = GlobalContext.GraphicsStates.NoWriteColor; Device.DepthStencilState = GlobalContext.GraphicsStates.DecMask; Device.ReferenceStencil = StencilLevel; // This should be +1, but in that case the last drrawed is blue and overlap all foreach ( EffectPass pass in Effect.Techniques[Technique].Passes ) { pass.Apply( ); Device.DrawUserIndexedPrimitives<VertexPositionColorTexture>( PrimitiveType.TriangleList, VertexData, 0, VertexData.Length, IndexData, 0, PrimitiveCount ); } } public static class GraphicsStates { public static BlendState NoWriteColor = new BlendState( ) { ColorSourceBlend = Blend.One, AlphaSourceBlend = Blend.One, ColorDestinationBlend = Blend.InverseSourceAlpha, AlphaDestinationBlend = Blend.InverseSourceAlpha, ColorWriteChannels1 = ColorWriteChannels.None }; public static DepthStencilState IncMask = new DepthStencilState( ) { StencilEnable = true, StencilFunction = CompareFunction.Equal, StencilPass = StencilOperation.IncrementSaturation, }; public static DepthStencilState DecMask = new DepthStencilState( ) { StencilEnable = true, StencilFunction = CompareFunction.Equal, StencilPass = StencilOperation.DecrementSaturation, }; } How can achieve this? EDIT: I've just relized that the NoWriteColors.ColorWriteChannels1 should be NoWriteColors.ColorWriteChannels. :) Now it's clipping right. Any other approach?

  Read the article

• Windows Photo Viewer needs more ram?

  - by Aren B

  Ok, so i went to open a picture with the Windows Photo Viewer (Default) application and it told me this: Windows Photo Viewer can't display this picture because there might not be enough memory available on your computer. Close some programs that you aren't using or free some hard disk space (if it's almost full), and then try again. So looking at my 98% ram usage (thankyou VisualStudio x8 + SQL Server) I rebooted my computer. Now this is my load: And this is my hard-disk loadout: So now I go to load up that image again. SAME MESSAGE, what the heck? So apparantly 6gb isn't enough ram to open a 29k image that loads perfectly fine in MSPaint, Paint.NET, Photoshop It's a .png and it's not corrupt. So my question is: what gives?

  Read the article

• Display won't come back from power saver mode

  - by tynor

  I wan't sure where exactly to post this question, but this one seemed the most relevant. I have a Dell LCD monitor running off a Dell Inspiron 531 tower with an Nvidia GeForce 8600 GT video card. Just recently, when I turn my computer on, the display immediately enters its "Power Saver" mode, and never wakes up. This problem doesn't occur with other computers, or even with this same computer when I use the integrated graphics. I have no other displays to test the card on. I have also tried replacing the power supply (my original one, which ran that video card for 4 years, was 300w, and I replaced it with 500w). Is there anything else I can try to troubleshoot this issue?

  Read the article

• Which tools you use for development in your company?…Please be exact [closed]

  - by predrag.music

  If you are a professional php/(my/postgre/?)sql/? developer and working in a professional team ... I would like to know which tools you use for development in your company. I do not care which tool is better or worse, but "which tools you use", if it is not a TOP SECRET :) For example, these are just some of the tools i/we use (first those used most (in general)): Pen, paper lots of cofee, cola ... let me think ... mmmm ... yeah more cofee :) All kinds of books (a lots of books) OS: Win / MacOS X Server: Hosted (CentOS )/ At work Mac OS X Dev server: XAMPP / MAMP / LAMP Editor: Notepad++ IDE: Netbeans / Zend Studio / Eclipse Version Control System: Mercurial / SVN FTP: Filezilla mostly / ... Passwords: KeePass js / ajax: jQuery / pure js / jQuery UI Framework:CI / Zend / pure php Database: MySQL / Other ORM: Framework layer db (Not an ORM I know but...) / Doctrine (2) / no ORM Debugging: Xdebug (PHP) / firebug (ajax/js/html/css/...) / framework profiler (stuff) / ... (x) Dreaming: About... Thinking: Not about chaos in ? direction .... n Anything else that comes to mind n+1 Zilion other stuff i know but i can't remember ... 8 some other stuff i (don't) remember i forgot, give up, delete, lost, said to myself never again, i haven't had time stuff, have on computer stuff but can't find or don't even know i have it on my computer at least 2-3 or more times, stuff I said to myself i'll check later and never checked again for all sort of "perfectly justified" reasons (time, memory, wife :), whatever,...), ... what is the reason i'm asking this?:) 8 and beyond looking forward to see a lot of answers ?

  Read the article

• How to execute a shell script on startup?

  - by vijay.shad

  I have create a script to start a server(my first question). Now I want it to run on the system boot and start the defined server. What should I do to get this done? My findings tell me put this file in /etc/init.d location and it will execute when the system will boot. But I am not able to understand how the first argument on the startup will be start? Is this predefined somewhere to use start as $1? If I want to have a case startall that will start all the servers in the script, then what are the options I can manage. My Script is like this: #!/bin/bash case "$1" in start) start ;; stop) stop ;; restart) $0 stop $0 start ;; *) echo "usage: $0 (start|stop|restart)" ;; esac

  Read the article

• How can I move a polygon edge 1 unit away from the center?

  - by Stephen

  Let's say I have a polygon class that is represented by a list of vector classes as vertices, like so: var Vector = function(x, y) { this.x = x; this.y = y; }, Polygon = function(vectors) { this.vertices = vectors; }; Now I make a polygon (in this case, a square) like so: var poly = new Polygon([ new Vector(2, 2), new Vector(5, 2), new Vector(5, 5), new Vector(2, 5) ]); So, the top edge would be [poly.vertices[0], poly.vertices[1]]. I need to stretch this polygon by moving each edge away from the center of the polygon by one unit, along that edge's normal. The following example shows the first edge, the top, moved one unit up: The final polygon should look like this new one: var finalPoly = new Polygon([ new Vector(1, 1), new Vector(6, 1), new Vector(6, 6), new Vector(1, 6) ]); It is important that I iterate, moving one edge at a time, because I will be doing some collision tests after moving each edge. Here is what I tried so far (simplified for clarity), which fails triumphantly: for(var i = 0; i < vertices.length; i++) { var a = vertices[i], b = vertices[i + 1] || vertices[0]; // in case of final vertex var ax = a.x, ay = a.y, bx = b.x, by = b.y; // get some new perpendicular vectors var a2 = new Vector(-ay, ax), b2 = new Vector(-by, bx); // make into unit vectors a2.convertToUnitVector(); b2.convertToUnitVector(); // add the new vectors to the original ones a.add(a2); b.add(b2); // the rest of the code, collision tests, etc. } This makes my polygon start slowly rotating and sliding to the left, instead of what I need. Finally, the example shows a square, but the polygons in question could be anything. They will always be convex, and always with vertices in clockwise order.

  Read the article

• Windows shared printers: Process job on server machine, not the client

  - by asr

  Hi. While working with Linux clients to Windows SMB/CIFS filesharing servers, from time to time I find myself having to print to a printer with no drivers available under Linux. For some reason, the Windows computer expects the job to be sent in an already processed format, so it can be fed directly to the printer in its own, weird language. It would be great if I could send the print job in Postscript or other standard format to the Windows computer sharing this printer, and then this PS could be processed under Windows. Is there a way to accomplish this? Because I don't seem to find the option. Thanks a lot.

  Read the article

• How to forward UDP Wake-on-Lan port to broadcast IP with IPTABLES?

  - by Nazgulled

  I'm trying to setup Wake-on-Lan for some of the LAN computers at home and it seems that I need to open a UDP port (7 or 9 being the most common) and forward all requests to the broadcast IP, which in my case is 192.168.1.255. The problem is that my router does not allow me to forward anything to the broadcast IP. I can connect to my router through telnet and it seems this router uses IPTABLES, but I don't know much about it or how to is. Can someone help me out with the proper iptables commands to do what I want? Also, in case it doesn't work, the commands to put everything back would be nice too. One last thing, rebooting the router will keep those manually added iptables entries or I would need to run them every time?

  Read the article

• Programming as a minor

  - by Tomas Cokis

  Hello Everyone! I've never asked a question here at programmers, and for reasons which will become obvious later I've never answered one here, but I do poke around in short bursts. Anyway, I'm 15 right now, and I've been programming in C++ for 4 years, just working on my own projects that are aim so high as to never be finished. I've been working on a single project for the last year, and every 3 months, I add a new system into it. It might be a value tabling directory enabled log system, or a render system, or a class to load up xml files, whatever it is, I don't mind too much that the overall project (a 3d engine) isn't ever going to get finished, I just get some satisfaction from getting what I have done building and running. I don't know what I want to do when I grow up, although I suspect I'll go into some form of engineering, but I was interested in knowing if I do choose to go into a career as a developer, what kind of material I could look at to push myself up and get myself experience that might help my career later. I'm not talking about books in particular, I'm more interested in subjects areas that will get me access to good job opportunities, or that will give me a hand-up if I do computer science and software related courses at uni. One of the things I was thinking of doing was designing some of the logic gate components of a small computer - which I started briefly over the holidays, working out integer addition, subtraction and multiplication. That kind of stuff interests me, but is it really useful - or more useful then just more programming? But anyway, Any advice? Should I continue on my perpetual 3d engine? Are there any other projects or particular accomplishments that would help my education? Perhaps I should mention that I live in Perth, Australia, so local software companies are likely to be more scarce then usual.

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >