Search Results

Search found 10388 results on 416 pages for 'hardware selection'.

Page 291/416 | < Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >

• Windows 8 switch user is very slow

  - by Chris Weber

  I recently upgraded to Windows 8 from Windows 7. One major annoyance is how slow the "switch user" command is. In Windows 7 switching users was fairly fast. I've got an SSD drive with pretty good hardware, so I'm suspecting it's something with Windows 8, either a defect, or the fact that I upgraded from Windows 7 instead of doing a clean install. Anybody have this problem? My wife is complaining enough about Windows 8 and this is one of the biggest complaints.

  Read the article

• Switch to switch encryption over a wireless bridge (TrustSec?)

  - by metatheorem

  I am planning to connect an existing Cisco 3750 switch to a 3560C switch over a wireless PTP bridge. The bridge will be WPA2 protected, but I am looking for an additional measure of security between the switches to prevent other wireless access through either switch. They do not support IPSec, only 802.1Q tunnels, and buying additional hardware is not likely an option. I am looking into using TrustSec manual mode between the switches. After some effort reading into TrustSec and MACsec, I am mostly certain this is a good choice over the wireless bridge, keeping in mind it is a shared medium. Two questions: Can I reliably prevent other wireless traffic from accessing the switches using TrustSec? Does anyone know of any better options with the 3000 series switches?

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

• ServerA can't access ServerB through UNC path. How do I troubleshoot?

  - by cparker4486

  All my servers are in the same domain on the same network. ServerA cannot access ServerB through UNC path. However DNS resolves correctly for ServerB from ServerA. For example "ping ServerB" works as expected. ServerB can reach ServerA through UNC path without any problem. Likewise all other servers and clients can reach ServerB through UNC path without any problem. The software firewall on ServerB is not turned on and there are no hardware firewalls getting in the way. This makes no sense and I don't know how to troubleshoot it. Nothing shows up in the event logs of ServerA and ServerB has one event (repeatedly): Event ID: 3019, Source: MrxSmb. ServerA is Server 2008 R2. ServerB is Server 2003 R2. I have other 2008 R2 servers that connect without any problem.

  Read the article

• Do HTTP reverse proxies typically enable HTTP Keep-Alive on the client side of the proxied connection and not on the server side?

  - by LostInComputer

  HAProxy has the ability to enable HTTP keep-alive on the client side (client <- HAProxy) but disable it on the server side (HAProxy <- server). Some of our clients connect to our web service via satellite so the latency is ~600ms and I think that by enabling keep-alive, it will speed things up a bit. Am I right? Is this supported by Nginx? Is this a widely implemented feature in other software and hardware load balancers? What else besides HAProxy?

  Read the article

• Sharing files between multiple computers?

  - by Koalatea

  At my school, we have 13 iMacs that we use to make our yearbook. Currently our school has some servers for us, but since we work with so many files ( thousands of pictures, most of which are ~3MB ) it slows down far too much. Is there a way to better share files between our computers? We are on a wireless network and the whole school shares the same servers, we have around probably 400 computers in the school. Is there a hardware fix I can do? Something like buying an external and hooking only yearbook computers to it?

  Read the article

• Disk fragmentation when dealing with many small files

  - by Zorlack

  On a daily basis we generate about 3.4 Million small jpeg files. We also delete about 3.4 Million 90 day old images. To date, we've dealt with this content by storing the images in a hierarchical manner. The heriarchy is something like this: /Year/Month/Day/Source/ This heirarchy allows us to effectively delete days worth of content across all sources. The files are stored on a Windows 2003 server connected to a 14 disk SATA RAID6. We've started having significant performance issues when writing-to and reading-from the disks. This may be due to the performance of the hardware, but I suspect that disk fragmentation bay be a culprit at well. Some people have recommended storing the data in a database, but I've been hesitant to do this. An other thought was to use some sort of container file, like a VHD or something. Does anyone have any advice for mitigating this kind of fragmentation?

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• Hylafax with serial over IP modem

  - by zero_r

  I'm looking into virtualizing a Hylafax server which currently runs on a dedicated hardware running CentOS with a Divalogic card. The main issue obviously is, how to connect the modem to the VM. There are serial over IP devices available at digi.com. Maybe there are others? Regarding digi.com devices, as far as I understood one can install the RealPort software and then have a /dev/ttySx device presented to the Linux server. This device then can be used as serial connection to the modem. Does someone have such a configuration in place? Or does someone have another idea to virtualize a Hylafax server (outbound faxes only). Thank you in advance

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• What causes Remote Desktop Services Manager to crash in Server 2008 R2?

  - by milkmood

  I have this consistent problem of RDSM crashing in Server 2008 R2. It is either really slow to open, sometimes never opens, or after it's been open and working properly for a bit, stops working, and forces an unload of the snap-in. It's done this since the deployment of this server, new hardware, new instance of S2k8. Domain Administrator login. I am using it to manage 3 Terminal Servers, the other two are S2k3. I've used it without issues on other 2008 servers.

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• Disk controller speed responsible for slow write speeds?

  - by vizvayu

  I have question. I'm using ESXi 4.0U1 in an IBM x3200M2 with an integrated LSI 1064e RAID controller, without any kind of cache. I have 3 250GB HOT-SWAP SATA HDs configured in RAID1E (IME). ESXi works fine, read speed are quite OK, but write speeds are incredible slow, never more than 8MB/s, and this is the best case scenario, benchmarking with iozone streaming writes, using a VMWare Paravirtual controller and with only this VM active, no swapping of any kind (total vm memory reserved). Already wrote to IBM but I don't have any kind of pay support so they didn't even answered, so I'm just wondering... anybody has any experience with a similar setup? I just want to be sure this is hardware related and can't be fixed with some kind of config option, because I'm thinking on buying a new RAID controller (Adaptec 2405 looks nice). Thanks again!

  Read the article

• ruby on rails server is intermittently slow

  - by Richard

  My rails installation was chugging along nicely. Last night we had to perform a hot-patch with was really a standard deploy of some exception code. Once capistrano finished the operation one of our admins discovered that there were two long running passenger processes. While we have deployed release over the past two weeks it would appear that these processes have been here and alive the whole time. Granted they could have been zombies or any other artifact and at this point we do not know what state they were in. Which leads me to the question: There are so many moving parts between the rails application and the OS/hardware that being a SME is probably no longer possible. So; how does a sysadmin perform root-cause analysis with any certainty? And: When do I just start rebooting servers?

  Read the article

• Where does traffic shaping typically take place?

  - by eekmeter

  As part of upgrading our network infrastructure we are looking to traffic shape our bandwidth since we only have about 3Mb down / 1 Mb up. We're looking to prioritize it so that web browsing gets priority and in the future some VOIP might be added in as well. Internal LAN traffic doesn't need to be controlled just our outbound connection. I've been looking at Cisco hardware and it seems that several of their products do shaping at the core switch, firewall, and router level. I'm wondering where does shaping normally take place? Is it normally done at the router, core switch, or firewall?

  Read the article

• good books about server architecture?

  - by ajsie

  when the traffic for a website grows i dont think one apache server in a vps is the way to go. i would like to know more about how i then should set up the server side architecture. im not that much into hardware stuff (what kind of cables to use, different cpu architectures etc), but interested in the software architecture: what servers (apache, nginx, squid, varnish etc) to use and how they interact with each other one server in one machine? how many mysql servers. how many apache, nginx servers and so on. how the "machine court" looks like. are there any good books about this area?

  Read the article

• Hosting solution for sensitive client data

  - by Mark

  Hello, We are developing a web application that will deal with highly sensitive (financial) data of clients (audience is medium to large sized businesses). Clients will be under scrutiny from regulators & auditors and, as such, we will be too. More importantly to give clients a level of comfort our application and related hosting arrangement should instill a lot of confidence with them. We are looking into using a cloud based service like Linode, Amazon EC2, etc. To allow for maximum flexibility We are keen on putting everything on virtual servers and avoiding having to buy our own hardware. Does a cloud based service make sense for our particular scenario? If not what type of hosting should we consider? If so what should we look out for? Thanks!

  Read the article

• Dell monitors keep blank after initial start

  - by offler

  We have Dell T1650 PCs with 2 nVidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectedly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• Computer freezes when CD/DVD is enable, computer HP Pavilion dv98278 Notebook OS - Vista

  - by tom

  As the title states, when my CD/DVD drive is enable my computer freezes showing a diagonal patter on the monitor. This is what has been attempted (DF - didn't fix): (1) cleaned regsitry file - DF; (2) uninstalled and installed driver HL-DT-ST DVDRAM GSA T20L ATA - DF; Yelled profanities at the computer - DF but I felt better. I want to install OS 7 but this makes it much more complicated. It's appearing as a hardware issue to me, however, what do I know. Any suggestions?

  Read the article

• How to convert WinXP + Apps on RAID0 to use just one of the two RAID disks?

  - by chris5gd

  I have two 150GB SATA drives in hardware RAID 0, on which I have my C: (Win XP) and D: (installed apps). I'm migrating to Windows 7, but I want to keep my XP system until I've got it all running smoothly. So I want to: break the RAID move C: and D: to one of the drives (there's enough room) use the other drive for Win 7 boot into one or the other Clearly I can't move C: and D: after breaking the RAID, so I'm assuming I need to image the two partitions first, then break the RAID and restore the images to one of the drives. So my questions are: Is this possible? If so, what would be a good (free) imaging/restore tool? How do I ensure that the drive will boot after restoring the images? What sort of gotchas should I look out for? If there's a better solution than this, I'd be grateful for suggestions. Thanks!

  Read the article

• Can a RAID disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me. Steve

  Read the article

• How to effectively secure a dedicated server for intranet use?

  - by Mark

  I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• migration of physical server to a virtual solution, what i have to do?

  - by bibarse

  Hello I'm new in this forum, so i would like that you forgive me for my blissfully and my low English level. I'm a trainee in company one month ago, and my mission is to migrate 3 physicals servers to a virtualization technology. The company edit softwares for E-learning so there are lots of data like videos, flash and compressed (zip). This is some inventory of the servers: OS: Debian, 2 redhat, apache, php/mysql, sendMail/Dovecot, webmin with virtualmin template to create dynamically the web sites because there is no sysadmin ... The future provider will be responsible of to secure, update and create the virtual machines (outsourcing) and with a RedHat OS's. So i want that you help me to choose a virtualisation technologie (for the i prefer KVM of Redhat RHEV, VMWare is expensive), how evaluate the hardware needs (this for evolution of 4 or 5 years) and to elaborate a good planing to don't forget any think. Thank you for your responses.

  Read the article

• Can I run Ubuntu directly under Windows 8?

  - by huahsin68

  Text below is extract from the article, Windows 8 Tip: Virtualize with Hyper-V. Better still, Windows Virtual PC offered a feature called XP Mode, free for users of Windows 7 Professional, Enterprise, and Ultimate, which included a full working copy of Windows XP with Service Pack 3. But the big deal here is that as you installed applications in the virtual copy of XP, they would be made available through Windows 7’s Start Menu. And you could run these applications, side-by-side, with Windows 7 applications on the Windows 7 desktop. It was a seamless, integrated experience, ideal for those one-off application compatibility issues. I was thinking to install VirtualBox in Windows 8 and then run Ubuntu as guess OS. Since Hyper-V is a Type-0 hipervisor, may I know does this bring the same benefit if I have Ubuntu Linux install as a virtual guess OS? Meaning, if I turning the Ubuntu on (the guess OS), does the Ubuntu still able to access the hardware information like nVidia display card or processor information? I'm just curious to know can this be done?

  Read the article

< Previous Page | 287 288 289 290 291 292 293 294 295 296 297 298  | Next Page >