Search Results

Search found 8224 results on 329 pages for 'sometimes'.

Page 293/329 | < Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >

• XNA - 3D AABB collision detection and response

  - by fastinvsqrt

  I've been fiddling around with 3D AABB collision in my voxel engine for the last couple of days, and every method I've come up with thus far has been almost correct, but each one never quite worked exactly the way I hoped it would. Currently what I do is get two bounding boxes for my entity, one modified by the X translation component and the other by the Z component, and check if each collides with any of the surrounding chunks (chunks have their own octrees that are populated only with blocks that support collision). If there is a collision, then I cast out rays into that chunk to get the shortest collision distance, and set the translation component to that distance if the component is greater than the distance. The problem is that sometimes collisions aren't even registered. Here's a video on YouTube that I created showing what I mean. I suspect the problem may be with the rays that I cast to get the collision distance not being where I think they are, but I'm not entirely sure what would be wrong with them if they are indeed the problem. Here is my code for collision detection and response in the X direction (the Z direction is basically the same): // create the XZ offset vector Vector3 offsXZ = new Vector3( ( _translation.X > 0.0f ) ? SizeX / 2.0f : ( _translation.X < 0.0f ) ? -SizeX / 2.0f : 0.0f, 0.0f, ( _translation.Z > 0.0f ) ? SizeZ / 2.0f : ( _translation.Z < 0.0f ) ? -SizeZ / 2.0f : 0.0f ); // X physics BoundingBox boxx = GetBounds( _translation.X, 0.0f, 0.0f ); if ( _translation.X > 0.0f ) { foreach ( Chunk chunk in surrounding ) { if ( chunk.Collides( boxx ) ) { float dist = GetShortestCollisionDistance( chunk, Vector3.Right, offsXZ ) - 0.0001f; if ( dist < _translation.X ) { _translation.X = dist; } } } } else if ( _translation.X < 0.0f ) { foreach ( Chunk chunk in surrounding ) { if ( chunk.Collides( boxx ) ) { float dist = GetShortestCollisionDistance( chunk, Vector3.Left, offsXZ ) - 0.0001f; if ( dist < -_translation.X ) { _translation.X = -dist; } } } } And here is my implementation for GetShortestCollisionDistance: private float GetShortestCollisionDistance( Chunk chunk, Vector3 rayDir, Vector3 offs ) { int startY = (int)( -SizeY / 2.0f ); int endY = (int)( SizeY / 2.0f ); int incY = (int)Cube.Size; float dist = Chunk.Size; for ( int y = startY; y <= endY; y += incY ) { // Position is the center of the entity's bounding box Ray ray = new Ray( new Vector3( Position.X + offs.X, Position.Y + offs.Y + y, Position.Z + offs.Z ), rayDir ); // Chunk.GetIntersections(Ray) returns Dictionary<Block, float?> foreach ( var pair in chunk.GetIntersections( ray ) ) { if ( pair.Value.HasValue && pair.Value.Value < dist ) { dist = pair.Value.Value; } } } return dist; } I realize some of this code can be consolidated to help with speed, but my main concern right now is to get this bit of physics programming to actually work.

  Read the article

• When should I use a Process Model versus a Use Case?

  - by Dave Burke

  This Blog entry is a follow on to https://blogs.oracle.com/oum/entry/oum_is_business_process_and and addresses a question I sometimes get asked…..i.e. “when I am gathering requirements on a Project, should I use a Process Modeling approach, or should I use a Use Case approach?” Not surprisingly, the short answer is “it depends”! Let’s take a scenario where you are working on a Sales Force Automation project. We’ll call the process that is being implemented “Lead-to-Order”. I would typically think of this type of project as being “Process Centric”. In other words, the focus will be on orchestrating a series of human and system related tasks that ultimately deliver value to the business in a cost effective way. Put in even simpler terms……implement an automated pre-sales system. For this type of (Process Centric) project, requirements would typically be gathered through a series of Workshops where the focal point will be on creating, or confirming, the Future-State (To-Be) business process. If pre-defined “best-practice” business process models exist, then of course they could and should be used during the Workshops, but even in their absence, the focus of the Workshops will be to define the optimum series of Tasks, their connections, sequence, and dependencies that will ultimately reflect a business process that meets the needs of the business. Now let’s take another scenario. Assume you are working on a Content Management project that involves automating the creation and management of content for User Manuals, Web Sites, Social Media publications etc. Would you call this type of project “Process Centric”?.......well you could, but it might also fall into the category of complex configuration, plus some custom extensions to a standard software application (COTS). For this type of project it would certainly be worth considering using a Use Case approach in order to 1) understand the requirements, and 2) to capture the functional requirements of the custom extensions. At this point you might be asking “why couldn’t I use a Process Modeling approach for my Content Management project?” Well, of course you could, but you just need to think about which approach is the most effective. Start by analyzing the types of Tasks that will eventually be automated by the system, for example: Best Suited To? Task Name Process Model Use Case Notes Manage outbound calls Ö A series of linked human and system tasks for calling and following up with prospects Manage content revision Ö Updating the content on a website Update User Preferences Ö Updating a users display preferences Assign Lead Ö Reviewing a lead, then assigning it to a sales person Convert Lead to Quote Ö Updating the status of a lead, and then converting it to a sales order As you can see, it’s not an exact science, and either approach is viable for the Tasks listed above. However, where you have a series of interconnected Tasks or Activities, than when combined, deliver value to the business, then that would be a good indicator to lead with a Process Modeling approach. On the other hand, when the Tasks or Activities in question are more isolated and/or do not cross traditional departmental boundaries, then a Use Case approach might be worth considering. Now let’s take one final scenario….. As you captured the To-Be Process flows for the Sales Force automation project, you discover a “Gap” in terms of what the client requires, and what the standard COTS application can provide. Let’s assume that the only way forward is to develop a Custom Extension. This would now be a perfect opportunity to document the functional requirements (behind the Gap) using a Use Case approach. After all, we will be developing some new software, and one of the most effective ways to begin the Software Development Lifecycle is to follow a Use Case approach. As always, your comments are most welcome.

  Read the article

• Hyper-V for Developers Part 1 Internal Networks

  Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• How to restore/change Alt+Tab behaviour/ram usage and a few other things after Ubuntu upgrade from 11.04 to 11.10?

  - by fiktor

  I use Ubuntu for programming. I recently updated it from 11.04 to 11.10. There are some things I don't like in the new version of Unity desktop interface. I don't actually know if it is hard to restore previous behavior or not, and if it is not, where should I look to do that. I know a bit of programming, but I really don't know much about Linux settings. I used to have 3-6 terminal windows and switch between them with Alt+Tab and Shift+Alt+Tab. I liked half-transparent terminal windows, since with them I could open web-page with some instruction in Firefox, press Alt+Tab and type commands in a console window, being able to recognize text on a web-page under it. Now I have problems with my usual work-style because of the following. List of "negative" changes Alt+Tab shows just one icon for all console windows. When I wait some time, it, however, shows all windows, but I don't like to wait. I prefer to remember order of windows and press Alt+Tab as many times as I need to switch to the right window. Alt+Shift+Tab to switch in reverse order doesn't work now. Console windows are not transparent any more. When I don't wait, and switch to this icon, it shows all console windows altogether. So even if they were transparent, I wouldn't be able to see anything below them (I can read something only from the window, which is directly under current one, not a few levels under). When I run a few console windows in Unity I had 740Mb used on Ubuntu 11.04, but I have 1050Mb now. The question is how to make it back to 750-. I really need my memory, since I use my computer to work with 1512Mb of data and I try to save every 10Mb possible (if it doesn't take too much of machine and, more importantly, my time). When I press "The Super key" I have a field to type the name of the program I want to run. But now it sometimes shows this field, but when I'm trying to type nothing happens. Probably, focus is not on the right field. I don't really mean to restore exactly the same behavior, but I want to make my work in Ubuntu 11.10 efficient (at least as efficient as in Ubuntu 11.04). I would be happy if there are some ways to accomplish that. What have I tried I have installed CompizConfig Settings Manager. I have read this question. However enabling "Static Application Switcher" makes Alt+Tab crazy: after enabling it It says about key-binding conflicts with "Ubuntu Unity Plugin"; "Alt+Tab" switching doesn't change, but "Shift+Alt+Tab" now works and shows all windows; Memory usage increases. I have tried turning off Ubuntu Unity Plugin, but this doesn't seem right thing to do, since it seems to turn off all menus, a lot of keystrokes and app-launcher, which usually activates with "The Super key". I have found, that window transparency can be enabled by "Opacity, Brightness and Saturation" plugin from Accessibility. However I don't know if enabling it is the right thing to do (at least it increases memory usage). Update: everything solved but #3: see my own answer below. I have made a separate question about issue #3 (transparency).

  Read the article

• tightvnc authentication failure

  - by broiyan

  When I run a tightvnc client to establish a VNC session I sometimes receive an error message that suggests there are repeated failed VNC login attempts or a brute force attack. The message dialog title is "unsupported security type" and the text content is "too many authentication failures, try another connection? yes/no". This problem goes away if I reboot the Ubuntu server and reload the VNC server program and try again. From that point, it will work for multiple VNC sessions. My VNC sessions are typically about 20 minutes. At some time in the future, the problem may recur so it seems correlated to the time the server has been up or the time tightvnc has been loaded. Typically it takes only a day or so before the problem comes back. I am using tightvnc 1.3 on an server running Ubuntu 12.04. The version of vncserver is rather dated because that seems to be all that is available from tightvnc for linux servers. On the client side I use the newest Java-based VNC client (version 2.5) for both Windows access and Ubuntu access. All my VNC sessions are via SSH. I am the only user and I will typically use only the same client computer. How can I stop this problem from recurring? Edit I found the log file. This is a small excerpt of what I am seeing. Essentially, various IPs, not my own, are attempting to connect. What is the practical solution for this? 05/06/12 20:07:32 Got connection from client 69.194.204.90 05/06/12 20:07:32 Non-standard protocol version 3.4, using 3.3 instead 05/06/12 20:07:32 Too many authentication failures - client rejected 05/06/12 20:07:32 Client 69.194.204.90 gone 05/06/12 20:07:32 Statistics: 05/06/12 20:07:32 framebuffer updates 0, rectangles 0, bytes 0 05/06/12 20:24:56 Got connection from client 79.161.16.40 05/06/12 20:24:56 Non-standard protocol version 3.4, using 3.3 instead 05/06/12 20:24:56 Too many authentication failures - client rejected 05/06/12 20:24:56 Client 79.161.16.40 gone 05/06/12 20:24:56 Statistics: 05/06/12 20:24:56 framebuffer updates 0, rectangles 0, bytes 0 05/06/12 20:29:27 Got connection from client 109.230.246.54 05/06/12 20:29:27 Non-standard protocol version 3.4, using 3.3 instead 05/06/12 20:29:28 rfbVncAuthProcessResponse: authentication failed from 109.230.246.54 05/06/12 20:29:28 Client 109.230.246.54 gone 05/06/12 20:29:28 Statistics: 05/06/12 20:29:28 framebuffer updates 0, rectangles 0, bytes 0

  Read the article

• External USB drive is failing

  - by dma_k

  I have an external USB 2.0 drive WD My Book Mirror Edition, running in RAID 1 (mirroring) mode. A while ago the hard drive started to fail: it stops responding (directories are not listed returning an error after a big timeout). Sometimes it works for weeks before a failure, sometimes – few hours. Small write operations (like removing few files or editing a small file) do not harm, but when copying large files to the drive over the network, or creating the archive locally, the kernel dumps. Also interesting to note that once kernel has failed, Linux does not want to reboot normally (reboot hangs); when Linux box is shutdown with power button, WD drive does not go to sleep mode (as it usually does): leds continue to run, pressing and holding the "shutdown" button on drive's back panel does not do anything; only unplugging the power cord helps. Here goes the boot log: Aug 16 00:32:21 kernel: [ 1.514106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Aug 16 00:32:21 kernel: [ 1.657738] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 1.673747] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 1.673751] ehci_hcd 0000:00:1d.7: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.725224] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Aug 16 00:32:21 kernel: [ 1.741647] ehci_hcd 0000:00:1d.7: using broken periodic workaround Aug 16 00:32:21 kernel: [ 1.761790] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Aug 16 00:32:21 kernel: [ 1.761873] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 Aug 16 00:32:21 kernel: [ 1.796043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Aug 16 00:32:21 kernel: [ 1.879069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Aug 16 00:32:21 kernel: [ 1.895446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 1.911796] usb usb1: Product: EHCI Host Controller Aug 16 00:32:21 kernel: [ 1.928015] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd Aug 16 00:32:21 kernel: [ 1.944331] usb usb1: SerialNumber: 0000:00:1d.7 Aug 16 00:32:21 kernel: [ 1.961285] usb usb1: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 1.994412] hub 1-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.010864] hub 1-0:1.0: 8 ports detected Aug 16 00:32:21 kernel: [ 2.085939] uhci_hcd: USB Universal Host Controller Interface driver Aug 16 00:32:21 kernel: [ 2.191945] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Aug 16 00:32:21 kernel: [ 2.226029] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.226034] uhci_hcd 0000:00:1d.0: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.243237] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Aug 16 00:32:21 kernel: [ 2.260390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00 Aug 16 00:32:21 kernel: [ 2.277517] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.294815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.312173] usb usb2: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.329534] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.346828] usb usb2: SerialNumber: 0000:00:1d.0 Aug 16 00:32:21 kernel: [ 2.412989] usb usb2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.430651] usb 1-2: new high speed USB device using ehci_hcd and address 2 Aug 16 00:32:21 kernel: [ 2.449046] hub 2-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.466514] hub 2-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.484639] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Aug 16 00:32:21 kernel: [ 2.537750] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.537756] uhci_hcd 0000:00:1d.1: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.555085] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Aug 16 00:32:21 kernel: [ 2.572231] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00 Aug 16 00:32:21 kernel: [ 2.589593] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.606869] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.624134] usb usb3: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.641329] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 2.658505] usb usb3: SerialNumber: 0000:00:1d.1 Aug 16 00:32:21 kernel: [ 2.675843] usb usb3: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 2.692864] hub 3-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 2.709651] hub 3-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 2.727378] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Aug 16 00:32:21 kernel: [ 2.768252] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 2.768258] uhci_hcd 0000:00:1d.2: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.806679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Aug 16 00:32:21 kernel: [ 2.824117] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00 Aug 16 00:32:21 kernel: [ 2.841405] usb 1-2: New USB device found, idVendor=1058, idProduct=1104 Aug 16 00:32:21 kernel: [ 2.858448] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Aug 16 00:32:21 kernel: [ 2.875347] usb 1-2: Product: My Book Aug 16 00:32:21 kernel: [ 2.892113] usb 1-2: Manufacturer: Western Digital Aug 16 00:32:21 kernel: [ 2.908915] usb 1-2: SerialNumber: 575532553130303530353538 Aug 16 00:32:21 kernel: [ 2.943242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 2.960405] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 2.977615] usb usb4: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 2.994687] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.011711] usb usb4: SerialNumber: 0000:00:1d.2 Aug 16 00:32:21 kernel: [ 3.029589] usb usb4: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.082027] sd 2:0:0:0: [sda] Attached SCSI disk Aug 16 00:32:21 kernel: [ 3.103953] usb 1-2: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.122625] hub 4-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.140484] hub 4-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.161680] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 Aug 16 00:32:21 kernel: [ 3.181257] uhci_hcd 0000:00:1d.3: setting latency timer to 64 Aug 16 00:32:21 kernel: [ 3.181263] uhci_hcd 0000:00:1d.3: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.198614] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 Aug 16 00:32:21 kernel: [ 3.216012] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00 Aug 16 00:32:21 kernel: [ 3.249877] Uniform CD-ROM driver Revision: 3.20 Aug 16 00:32:21 kernel: [ 3.267765] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Aug 16 00:32:21 kernel: [ 3.284947] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Aug 16 00:32:21 kernel: [ 3.302023] usb usb5: Product: UHCI Host Controller Aug 16 00:32:21 kernel: [ 3.319215] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd Aug 16 00:32:21 kernel: [ 3.336298] usb usb5: SerialNumber: 0000:00:1d.3 Aug 16 00:32:21 kernel: [ 3.368377] Initializing USB Mass Storage driver... Aug 16 00:32:21 kernel: [ 3.390652] usbcore: registered new interface driver hiddev Aug 16 00:32:21 kernel: [ 3.408109] scsi4 : SCSI emulation for USB Mass Storage devices Aug 16 00:32:21 kernel: [ 3.425281] sr 0:0:1:0: Attached scsi CD-ROM sr0 Aug 16 00:32:21 kernel: [ 3.438978] sr 0:0:1:0: Attached scsi generic sg0 type 5 Aug 16 00:32:21 kernel: [ 3.456328] usbcore: registered new interface driver usb-storage Aug 16 00:32:21 kernel: [ 3.474564] usb-storage: device found at 2 Aug 16 00:32:21 kernel: [ 3.474567] usb-storage: waiting for device to settle before scanning Aug 16 00:32:21 kernel: [ 3.475320] sd 2:0:0:0: Attached scsi generic sg1 type 0 Aug 16 00:32:21 kernel: [ 3.492587] USB Mass Storage support registered. Aug 16 00:32:21 kernel: [ 3.510930] usb usb5: configuration #1 chosen from 1 choice Aug 16 00:32:21 kernel: [ 3.531076] hub 5-0:1.0: USB hub found Aug 16 00:32:21 kernel: [ 3.548399] hub 5-0:1.0: 2 ports detected Aug 16 00:32:21 kernel: [ 3.591743] input: Western Digital My Book as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.1/input/input2 Aug 16 00:32:21 kernel: [ 3.609515] generic-usb 0003:1058:1104.0001: input,hidraw0: USB HID v1.11 Device [Western Digital My Book] on usb-0000:00:1d.7-2/input1 Aug 16 00:32:21 kernel: [ 3.627466] usbcore: registered new interface driver usbhid Aug 16 00:32:21 kernel: [ 8.581664] usb-storage: device scan complete Aug 16 00:32:21 kernel: [ 8.624270] scsi 4:0:0:0: Direct-Access WD My Book 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.655135] scsi 4:0:0:1: Enclosure WD My Book Device 1008 PQ: 0 ANSI: 4 Aug 16 00:32:21 kernel: [ 8.675393] sd 4:0:0:0: Attached scsi generic sg2 type 0 Aug 16 00:32:21 kernel: [ 8.698669] scsi 4:0:0:1: Attached scsi generic sg3 type 13 Aug 16 00:32:21 kernel: [ 8.723370] sd 4:0:0:0: [sdb] 1953513472 512-byte logical blocks: (1.00 TB/931 GiB) Aug 16 00:32:21 kernel: [ 8.750477] sd 4:0:0:0: [sdb] Write Protect is off Aug 16 00:32:21 kernel: [ 8.769411] sd 4:0:0:0: [sdb] Mode Sense: 10 00 00 00 Aug 16 00:32:21 kernel: [ 8.769414] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.822971] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.841978] sdb: sdb1 Aug 16 00:32:21 kernel: [ 8.905580] sd 4:0:0:0: [sdb] Assuming drive cache: write through Aug 16 00:32:21 kernel: [ 8.924173] sd 4:0:0:0: [sdb] Attached SCSI disk Aug 16 00:32:21 kernel: [ 11.600492] XFS mounting filesystem sdb1 Aug 16 00:32:21 kernel: [ 12.222948] Ending clean XFS mount for filesystem: sdb1 After a while the following appears in a log: Aug 16 09:30:56 kernel: [32359.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:31:59 kernel: [32422.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 2 Aug 16 09:33:00 kernel: [32483.112029] usb 1-2: reset high speed USB device using ehci_hcd and address 2 And then it is followed by few kernel dumps, which I think, are not good: Aug 16 09:33:40 kernel: [32520.428027] INFO: task xfssyncd:1002 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32520.462689] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32520.497422] xfssyncd D c3d84a60 0 1002 2 0x00000000 Aug 16 09:33:40 kernel: [32520.532117] f6c9aa80 00000046 c1132742 c3d84a60 00000286 c1418100 c1418100 00000000 Aug 16 09:33:40 kernel: [32520.566867] f6c9ac3c c2808100 00000000 f653b18b 00001d76 00000001 f6c9aa80 c3c3f0e0 Aug 16 09:33:40 kernel: [32520.601343] 08e59242 f6c9ac3c 2e41392b 00000000 08e59242 00000000 c3f7fb48 0067385a Aug 16 09:33:40 kernel: [32520.635533] Call Trace: Aug 16 09:33:40 kernel: [32520.668991] [<c1132742>] ? cfq_set_request+0x0/0x290 Aug 16 09:33:40 kernel: [32520.702804] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32520.736555] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32520.770360] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32520.804110] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32520.837713] [<c1128230>] ? blk_peek_request+0x135/0x143 Aug 16 09:33:40 kernel: [32520.871265] [<f8582987>] ? scsi_dispatch_cmd+0x185/0x1e5 [scsi_mod] Aug 16 09:33:40 kernel: [32520.904407] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32520.937007] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32520.969033] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.000485] [<c10cffd1>] ? bio_add_page+0x28/0x2e Aug 16 09:33:40 kernel: [32521.031403] [<f8918d38>] ? _xfs_buf_ioapply+0x206/0x22b [xfs] Aug 16 09:33:40 kernel: [32521.061888] [<f89197bd>] ? xfs_buf_iorequest+0x38/0x60 [xfs] Aug 16 09:33:40 kernel: [32521.091845] [<f8907230>] ? xlog_bdstrat_cb+0x16/0x3d [xfs] Aug 16 09:33:40 kernel: [32521.121222] [<f8905781>] ? XFS_bwrite+0x32/0x64 [xfs] Aug 16 09:33:40 kernel: [32521.150007] [<f89059be>] ? xlog_sync+0x20b/0x311 [xfs] Aug 16 09:33:40 kernel: [32521.178214] [<f89112fc>] ? xfs_trans_ail_tail+0x12/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.205914] [<f8906261>] ? xlog_state_sync_all+0xa2/0x141 [xfs] Aug 16 09:33:40 kernel: [32521.233074] [<f8906611>] ? _xfs_log_force+0x51/0x68 [xfs] Aug 16 09:33:40 kernel: [32521.259664] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32521.285662] [<f8906636>] ? xfs_log_force+0xe/0x27 [xfs] Aug 16 09:33:40 kernel: [32521.311171] [<f89202df>] ? xfs_sync_worker+0x17/0x5c [xfs] Aug 16 09:33:40 kernel: [32521.336117] [<f891fbb7>] ? xfssyncd+0x134/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.360498] [<f891fa83>] ? xfssyncd+0x0/0x17d [xfs] Aug 16 09:33:40 kernel: [32521.384211] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32521.407890] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32521.430876] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32521.453394] INFO: task flush-8:16:12945 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32521.476116] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32521.498579] flush-8:16 D 00000000 0 12945 2 0x00000000 Aug 16 09:33:40 kernel: [32521.520649] f4e4d540 00000046 e412e940 00000000 00000002 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32521.542426] f4e4d6fc c2808100 00000000 00000000 000008b4 00000001 f4e4d540 c3c3f0e0 Aug 16 09:33:40 kernel: [32521.563745] 02e905a8 f4e4d6fc 007a5399 00000000 02e905a8 00000000 f4e2db48 00670b98 Aug 16 09:33:40 kernel: [32521.585077] Call Trace: Aug 16 09:33:40 kernel: [32521.605790] [<c126b532>] ? io_schedule+0x5f/0x98 Aug 16 09:33:40 kernel: [32521.626184] [<c1128be0>] ? get_request_wait+0xcb/0x146 Aug 16 09:33:40 kernel: [32521.646133] [<c10437ba>] ? autoremove_wake_function+0x0/0x2d Aug 16 09:33:40 kernel: [32521.665659] [<c112907c>] ? __make_request+0x2cc/0x3d9 Aug 16 09:33:40 kernel: [32521.684716] [<f891796e>] ? xfs_convert_page+0x30a/0x331 [xfs] Aug 16 09:33:40 kernel: [32521.703366] [<c1127cf1>] ? generic_make_request+0x266/0x2b4 Aug 16 09:33:40 kernel: [32521.721644] [<c10cf821>] ? bvec_alloc_bs+0x95/0xaf Aug 16 09:33:40 kernel: [32521.739465] [<c1127dfb>] ? submit_bio+0xbc/0xd6 Aug 16 09:33:40 kernel: [32521.756896] [<c10cfa45>] ? bio_alloc_bioset+0x7b/0xba Aug 16 09:33:40 kernel: [32521.774046] [<f8917af0>] ? xfs_submit_ioend_bio+0x3b/0x44 [xfs] Aug 16 09:33:40 kernel: [32521.790694] [<f8917ba3>] ? xfs_submit_ioend+0xaa/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.806736] [<f891817d>] ? xfs_page_state_convert+0x5c0/0x61c [xfs] Aug 16 09:33:40 kernel: [32521.822859] [<c113705b>] ? __lookup_tag+0x8e/0xee Aug 16 09:33:40 kernel: [32521.838958] [<f891840d>] ? xfs_vm_writepage+0x91/0xc4 [xfs] Aug 16 09:33:40 kernel: [32521.855039] [<c108bbcc>] ? __writepage+0x8/0x22 Aug 16 09:33:40 kernel: [32521.871067] [<c108c17b>] ? write_cache_pages+0x1af/0x29f Aug 16 09:33:40 kernel: [32521.886616] [<c108bbc4>] ? __writepage+0x0/0x22 Aug 16 09:33:40 kernel: [32521.901593] [<c108c285>] ? generic_writepages+0x1a/0x21 Aug 16 09:33:40 kernel: [32521.916455] [<f8918338>] ? xfs_vm_writepages+0x0/0x38 [xfs] Aug 16 09:33:40 kernel: [32521.931484] [<c108c2a5>] ? do_writepages+0x19/0x25 Aug 16 09:33:40 kernel: [32521.946648] [<c10c80d9>] ? writeback_single_inode+0xc7/0x273 Aug 16 09:33:40 kernel: [32521.961675] [<c10c8c44>] ? writeback_inodes_wb+0x3dd/0x49c Aug 16 09:33:40 kernel: [32521.976831] [<c10c8e18>] ? wb_writeback+0x115/0x178 Aug 16 09:33:40 kernel: [32521.991778] [<c10c901f>] ? wb_do_writeback+0x121/0x131 Aug 16 09:33:40 kernel: [32522.006538] [<c103abaf>] ? process_timeout+0x0/0x5 Aug 16 09:33:40 kernel: [32522.021091] [<c10c9050>] ? bdi_writeback_task+0x21/0x89 Aug 16 09:33:40 kernel: [32522.035493] [<c10979e5>] ? bdi_start_fn+0x59/0xa4 Aug 16 09:33:40 kernel: [32522.049765] [<c109798c>] ? bdi_start_fn+0x0/0xa4 Aug 16 09:33:40 kernel: [32522.063792] [<c1043588>] ? kthread+0x61/0x66 Aug 16 09:33:40 kernel: [32522.077612] [<c1043527>] ? kthread+0x0/0x66 Aug 16 09:33:40 kernel: [32522.091260] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 Aug 16 09:33:40 kernel: [32522.104966] INFO: task smartctl:13098 blocked for more than 120 seconds. Aug 16 09:33:40 kernel: [32522.118883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 16 09:33:40 kernel: [32522.133012] smartctl D 00000020 0 13098 13097 0x00000000 Aug 16 09:33:40 kernel: [32522.147221] e50b9540 00000086 c11d28a8 00000020 00000770 c1418100 c1418100 c14136ac Aug 16 09:33:40 kernel: [32522.161720] e50b96fc c2808100 00000000 e53e8800 00000000 00000020 c3cec000 c13886c0 Aug 16 09:33:40 kernel: [32522.176217] f99dab68 e50b96fc 007a4f1e 00000001 c4082f24 c4082ed8 00000001 c3c3f0e0 Aug 16 09:33:40 kernel: [32522.190737] Call Trace: Aug 16 09:33:40 kernel: [32522.205038] [<c11d28a8>] ? __netdev_alloc_skb+0x14/0x2d Aug 16 09:33:40 kernel: [32522.219605] [<c126b799>] ? schedule_timeout+0x20/0xb0 Aug 16 09:33:40 kernel: [32522.234144] [<c112820d>] ? blk_peek_request+0x112/0x143 Aug 16 09:33:40 kernel: [32522.248649] [<f85873b6>] ? scsi_request_fn+0x3c1/0x47a [scsi_mod] Aug 16 09:33:40 kernel: [32522.263233] [<c103aba8>] ? del_timer+0x55/0x5c Aug 16 09:33:40 kernel: [32522.277773] [<c126b6a2>] ? wait_for_common+0xa4/0x100 Aug 16 09:33:40 kernel: [32522.292342] [<c102cd8d>] ? default_wake_function+0x0/0x8 Aug 16 09:33:40 kernel: [32522.306958] [<c112b3d1>] ? blk_execute_rq+0x8b/0xb2 Aug 16 09:33:40 kernel: [32522.321569] [<c112b2ac>] ? blk_end_sync_rq+0x0/0x23 Aug 16 09:33:40 kernel: [32522.336070] [<c112b58b>] ? blk_recount_segments+0x13/0x20 Aug 16 09:33:40 kernel: [32522.350583] [<c1127307>] ? blk_rq_bio_prep+0x44/0x74 Aug 16 09:33:40 kernel: [32522.365059] [<c112b0b2>] ? blk_rq_map_kern+0xc5/0xee Aug 16 09:33:40 kernel: [32522.379439] [<c112e2a5>] ? sg_scsi_ioctl+0x221/0x2aa Aug 16 09:33:40 kernel: [32522.393801] [<c112e672>] ? scsi_cmd_ioctl+0x344/0x39a Aug 16 09:33:40 kernel: [32522.408140] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.422566] [<c1024c87>] ? update_curr+0x106/0x1b3 Aug 16 09:33:40 kernel: [32522.436832] [<f87676aa>] ? sd_ioctl+0x90/0xb5 [sd_mod] Aug 16 09:33:40 kernel: [32522.451228] [<c112c35f>] ? __blkdev_driver_ioctl+0x53/0x63 Aug 16 09:33:40 kernel: [32522.465689] [<c112cbbf>] ? blkdev_ioctl+0x850/0x891 Aug 16 09:33:40 kernel: [32522.479982] [<c1020474>] ? __wake_up_common+0x34/0x59 Aug 16 09:33:40 kernel: [32522.494138] [<c10244cd>] ? complete+0x28/0x36 Aug 16 09:33:40 kernel: [32522.507986] [<c1086c64>] ? find_get_page+0x1f/0x81 Aug 16 09:33:40 kernel: [32522.521671] [<c10abed5>] ? add_partial+0xe/0x40 Aug 16 09:33:40 kernel: [32522.535285] [<c1086e68>] ? lock_page+0x8/0x1d Aug 16 09:33:40 kernel: [32522.548797] [<c1087432>] ? filemap_fault+0xb5/0x2e6 Aug 16 09:33:40 kernel: [32522.562141] [<c109941c>] ? __do_fault+0x381/0x3b1 Aug 16 09:33:40 kernel: [32522.575441] [<c10d0c30>] ? block_ioctl+0x27/0x2c Aug 16 09:33:40 kernel: [32522.588708] [<c10d0c09>] ? block_ioctl+0x0/0x2c Aug 16 09:33:40 kernel: [32522.601858] [<c10bcd78>] ? vfs_ioctl+0x1c/0x5f Aug 16 09:33:40 kernel: [32522.614917] [<c10bd30c>] ? do_vfs_ioctl+0x4aa/0x4e5 Aug 16 09:33:40 kernel: [32522.627961] [<c10350db>] ? __do_softirq+0x115/0x151 Aug 16 09:33:40 kernel: [32522.640901] [<c126e270>] ? do_page_fault+0x2f1/0x307 Aug 16 09:33:40 kernel: [32522.653803] [<c10bd388>] ? sys_ioctl+0x41/0x58 Aug 16 09:33:40 kernel: [32522.666674] [<c10030fb>] ? sysenter_do_call+0x12/0x28 Then again few messages reset high speed USB device using ehci_hcd and address 2. I have browsed and read similar error reports here and there and I tried: I have upgraded the kernel from v2.6.26-2 to 2.6.32-5, which has not solved the problem. They say, this might a cable problem. I have tried to replace the USB-to-miniUSB cable (that connects external drive with computer) with another one. No changes. Somebody suggests to try another USB port. I have only 4 external USB ports, tried another one with no success. They say to try uhci_hcd. I have unmounted the device, unloaded ehci_hcd and mounted again. The difference was that now in log I get reset full speed USB device using uhci_hcd and address 2 and similar kernel dumps after a while. They say to echo 128 > /sys/block/sdb/device/max_sectors. I tried it with ehci_hcd with no success (note: I have issued this command after the drive was mounted but before using it actively). I have lauched smartmond and checking periodically the output of smartctl: drive temperature is OK, number of bad sectors and uncorrectable errors is 0. Nothing suspicious is reported by S.M.A.R.T. except maybe the following: Aug 16 12:40:12 kernel: [43715.314566] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Aug 16 12:40:13 kernel: [43715.705622] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO Of course, I have not tried all combinations of above. But unfortunately, I am run out of cardinal ideas. If anybody can advice something specific about the problem, you are very welcome.

  Read the article

• "The system time has changed" events after waking from sleep

  - by Damir Arh

  Sometimes when my computer running Windows 7 wakes up from sleep, it has to adjust the time. When this happens the following system event is logged: <Event xmlns='http://schemas.microsoft.com/win/2004/08/events/event'> <System> <Provider Name='Microsoft-Windows-Kernel-General' Guid='{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}'/> <EventID>1</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000010</Keywords> <TimeCreated SystemTime='2010-03-06T19:09:57.500000000Z'/> <EventRecordID>10672</EventRecordID> <Correlation/> <Execution ProcessID='4' ThreadID='56'/> <Channel>System</Channel> <Computer>GAME</Computer> <Security/> </System> <EventData> <Data Name='NewTime'>2010-03-06T19:09:57.500000000Z</Data> <Data Name='OldTime'>2010-03-06T17:34:32.870117200Z</Data> </EventData> <RenderingInfo Culture='sl-SI'> <Message>The system time has changed to ?2010?-?03?-?06T19:09:57.500000000Z from ?2010?-?03?-?06T17:34:32.870117200Z.</Message> <Level>Information</Level> <Task></Task> <Opcode>Info</Opcode> <Channel>System</Channel> <Provider>Microsoft-Windows-Kernel-General</Provider> <Keywords> <Keyword>Time</Keyword> </Keywords> </RenderingInfo> </Event> When this happens (I noticed it twice until now) the old time always corresponds to the time when computer entered sleep. The problem is that if Windows Media Center is scheduled for recording during this time, it just skips it as if the computer was turned off. I never had this problem running Windows Vista on the same machine. Any ideas what could be causing this problem and how to solve it are welcome.

  Read the article

• Where to find new Micro-BTX (uBTX) motherboards? Or should I just replace the box?

  - by John Rudy

  OK, so I'm guessing that it's dead. It's not my machine, and the owner is on a very fixed (IE, none) income. I'm generous, but I'm not that generous, since I already gave him what (at the time) was a fully functional and fairly well-equipped machine. (Aside from the mobo and proc, almost nothing else in it was stock. I'd taken it up to 3GB of RAM, upgraded the hard drive, added a decent video card, installed a wireless adapter, running Vista, etc.) According to further research, the machine uses a Micro-BTX (uBTX) motherboard, and since it's an AMD Athlon64, the AM2 socket. So I'm looking at a few options, and am wondering what's the best route to take? Find an AM2 socket uBTX mobo. I can't find them new online anywhere, leading me to believe that this is an obsolete form factor/chip combination. I don't want a refurb or a system pull because, quite honestly, once I deal with this mess, I don't want to go through it again in another year or two. Find an Intel uBTX mobo and a (relatively -- hah, I still want at least a dual-core) inexpensive Intel CPU. At this point, the only things stock in the machine would be the case and the PSU. :) Buy a bare-bones kit (mobo/proc/PSU/case, sometimes even RAM) from somewhere like CompUSA/TigerDirect or Fry's and move all of the other hardware over. This makes life difficult because the copy of Vista is an upgrade, tied to the copy of XP which shipped on the Gateway, which is OEM and won't install on the new box. :) If I change the CPU brand (AMD to Intel), will I need to reinstall Windows, or can it just be reactivated? Where can I actually find a new, in-box, not system pull, not refurb AM2 uBTX mobo? Do they even exist anymore? What kind of money are we talking (US dollars)? The end goal is to get the machine functional again as cheaply as humanly possible. If it were my own machine, I wouldn't even be asking this, I'd be custom-building a new one. However, it's not mine, I'm shelling out of pocket for the fix (plus the work), and thus want to keep that end price low-low-low.

  Read the article

• VMware Player loses internet connectivity

  - by Martha

  Periodically, the internet simply stops working in my virtual machine, and the only way I can get it working again is to restart the host computer. Since I use the virtual machine specifically for testing web pages, this is, shall we say, a bother. Details: I have Windows XP Pro running in VMware Player (v. 3.0.0 build-203739) on a Windows 7 host. It's set to NAT (shared IP address) because the firewall won't allow a bridged connection. Every couple of days or so, first the internet slows down to a crawl, then eventually it stops working altogether. Both VMWare and the virtual OS report that they are connected, everything looks just peachy, I can reach the internet from the host, but on the VM, all web pages time out and/or report that the server could not be found. (Browser-independent; tried with IE, FF, Chrome, Safari, and Opera.) When this happens, the only way I've found to restore the internet connectivity is to restart the host machine. Restarting the VM doesn't help, nor does refreshing network connections on either the host or the guest. (Although I'm not entirely sure I've found the proper way to refresh a network connection in Windows 7...) I have not noticed any predictability about when the problem occurs, i.e. it's not immediately after I do anything special. It seems to occur mostly after putting the host to sleep once or twice, but it has happened even if the host has been in continuous use. It also seems independent of when I start using the VM - sometimes, I wake up the VM and the internet is really slow in it, then eventually stops working altogether; other times, I wake up the VM, use it perfectly happily for a while, then suddenly the internet is gone. Does anyone know why this is occurring? Failing that, is there a workaround that's less drastic than restarting the host? (Windows 7 startup times are blazingly fast compared to previous versions of Windows, but it's still a hassle to close all my programs and reopen them again.) Edit: while badges overall are nice, the Tumbleweed badge isn't helping me to solve my problem. Hasn't anyone encountered anything even remotely similar?

  Read the article

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• How to calculate CPU % based on raw CPU ticks in SNMP

  - by bjeanes

  According to http://net-snmp.sourceforge.net/docs/mibs/ucdavis.html#scalar_notcurrent ssCpuUser, ssCpuSystem, ssCpuIdle, etc are deprecated in favor of the raw variants (ssCpuRawUser, etc). The former values (which don't cover things like nice, wait, kernel, interrupt, etc) returned a percentage value: The percentage of CPU time spent processing user-level code, calculated over the last minute. This object has been deprecated in favour of 'ssCpuRawUser(50)', which can be used to calculate the same metric, but over any desired time period. The raw values return the "raw" number of ticks the CPU spent: The number of 'ticks' (typically 1/100s) spent processing user-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). My question is: how do you turn the number of ticks into percentage? That is, how do you know how many ticks per second (it's typically — which implies not always — 1/100s, which either means 1 every 100 seconds or that a tick represents 1/100th of a second). I imagine you also need to know how many CPUs there are or you need to fetch all the CPU values to add them all together. I can't seem to find a MIB that gives you an integer value for # of CPUs which makes the former route awkward. The latter route seems unreliable because some of the numbers overlap (sometimes). For example, ssCpuRawWait has the following warning: This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. Some help would be appreciated. Everywhere seems to just say that % is deprecated because it can be derived, but I haven't found anywhere that shows the official standard way to perform this derivation. The second component is that these "ticks" seem to be cumulative instead of over some time period. How do I sample values over some time period? The ultimate information I want is: % of user, system, idle, nice (and ideally steal, though there doesn't seem to be a standard MIB for this) "currently" (over the last 1-60s would probably be sufficient, with a preference for smaller time spans).

  Read the article

• PHP-FPM High Memory Usage

  - by Ruel

  I have a wordpress blog, that uses WP-SuperCache, and normally I get 100 visitors per day. With nginx + php-fpm it's blazing fast, and I have no regrets. One thing i noticed, php-fpm takes a lot of memory: top - 09:20:43 up 5 days, 15:53, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 26 total, 1 running, 25 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1048576k total, 329956k used, 718620k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 10226 www-data 15 0 145m 52m 4584 S 0.0 5.1 0:07.55 php-fpm 10223 www-data 16 0 141m 48m 4692 S 0.0 4.8 0:08.70 php-fpm 20277 www-data 15 0 138m 46m 4368 S 0.0 4.5 0:07.55 php-fpm 20259 www-data 15 0 133m 41m 4600 S 0.0 4.0 0:06.68 php-fpm 12201 www-data 15 0 133m 41m 4632 S 0.0 4.0 0:08.31 php-fpm 11586 www-data 15 0 132m 40m 4292 S 0.0 3.9 0:03.27 php-fpm 29822 www-data 15 0 128m 36m 4356 S 0.0 3.6 0:05.26 php-fpm 28427 mysql 15 0 200m 7300 4764 S 0.0 0.7 0:47.89 mysqld 10202 root 18 0 98.3m 4320 1204 S 0.0 0.4 0:03.80 php-fpm 22524 root 18 0 86064 3396 2652 S 0.0 0.3 0:16.74 sshd 9882 www-data 18 0 42052 2572 804 S 0.0 0.2 0:27.52 nginx 9884 www-data 18 0 42052 2560 804 S 0.0 0.2 0:26.26 nginx 9881 www-data 18 0 42064 2524 804 S 0.0 0.2 0:29.24 nginx 9879 www-data 18 0 42032 2480 804 S 0.0 0.2 0:29.58 nginx 23771 root 15 0 12176 1820 1316 S 0.0 0.2 0:00.08 bash 28344 root 22 0 11932 1416 1184 S 0.0 0.1 0:00.00 mysqld_safe 18167 root 16 0 62628 1208 648 S 0.0 0.1 0:00.55 sshd 25941 root 15 0 12612 1192 928 R 0.0 0.1 0:02.21 top 11573 root 15 0 20876 1168 592 S 0.0 0.1 0:00.67 crond 9878 root 18 0 41000 1112 284 S 0.0 0.1 0:00.00 nginx 21736 root 23 0 21648 936 716 S 0.0 0.1 0:00.00 xinetd 11585 root 18 0 46748 816 428 S 0.0 0.1 0:00.00 saslauthd 14125 root 12 -4 12768 768 452 S 0.0 0.1 0:00.00 udevd 1 root 18 0 10352 728 616 S 0.0 0.1 0:17.93 init 24564 root 15 0 5912 680 544 S 0.0 0.1 0:01.90 syslogd 11618 root 18 0 46748 548 160 S 0.0 0.1 0:00.00 saslauthd Here's my php-fpm config: [global] pid = run/php-fpm.pid error_log = log/php-fpm.log log_level = notice [www] listen = 127.0.0.1:9000 user = www-data group = www-data pm = dynamic pm.max_children = 50 pm.start_servers = 3 pm.min_spare_servers = 3 pm.max_spare_servers = 10 pm.max_requests = 500 Sometimes it goes up to 400MB. And I'm planning to add a new website on my VPS. Is this normal?

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• SQL 2000: Intermittent Error 7399 with OLE DB Provider for Microsoft Jet

  - by Tim Lara

  I am using SQL Server 2000 on Windows Server 2003 SP2 and have set up a linked server to point at an Access 97 database using the OLE DB Provider 4.0 for Microsoft Jet. The problem I am having sounds almost exactly like the one described in this Microsoft KB article, except that the error I am getting is intermittent: http://support.microsoft.com/kb/814398 The SQL Server is running under the Local System account (which I don't have authority to change), and the Access 97 .mdb file that the linked server points to is on a Win XP Pro machine on the same LAN as the SQL Server machine, inside of a shared folder with permissions set to "Everyone" and "Full Control". Now, if the linked server connection never worked, it would make more sense that the problem is merely a permissions issue with the Local System account as the KB article above suggests, but the maddening thing is that sometimes the connection works just fine. When it fails, the error message is always the same: Error 7399: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. [OLE/DB provider returned message: Unspecified error] OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80004005: ]. Also, not only does the linked server setup occasionally work just fine on this one particular SQL Server, what is supposed to be exactly the same setup on 25 other servers works just fine EVERY TIME! Obviously, something in the non-working setup must not be exactly the same, but I'm having trouble figuring out where to look for the differences since the error message SQL Server returns is so vague. I know our sysadmins have had numerous issues with Active Directory replication across our domain, so my best guess is that there is some sort of odd group policy corruption going on, but I thought I'd ask here to see if I might be overlooking something more straightforward. Any ideas on how to further isolate the error would be greatly appreciated! For the record, here is a list of things I've already tried: Rebooting the SQL Server machine. Fixes the issue temporarily, then the error returns within a minute or two of startup. (This is why I suspect a rogue group policy that is slow to apply fouling things up.) Importing all database objects from the Access 97 mdb into a new, clean mdb file. Makes no difference. Moving the Access 97 mdb file to a local directory on the SQL Server machine instead of accessing it via a share on the Win XP Pro LAN machine. This works, but does not solve the problem because the mdb needs to be on the client machine for performance reasons and the ability to work "stand alone". Plus, the same shared folder access works fine on all other servers / clients on my network. Compared all the SQL Server, Windows Server, etc versions to a known working setup and everything appears to be the same.

  Read the article

• DPM 2010 PowerShell Script to Easily Restore Multiple Files

  - by bmccleary

  I’ve got what I thought would be a simple task with Data Protection Manager 2010 that is turning out to be quite frustrating. I have a file server on one server and it is the only server in a protection group. This file server is the repository for a document management application which stores the files according to the data within a SQL database. Sometimes users inadvertently delete files from within our application and we need to restore them. We have all the information needed to restore the files to include the file name, the folder that the file was stored in and the exact date that the file was deleted. It is easy for me to restore the file from within the DPM console since we have a recovery point created every day, I simply go to the day before the delete, browse to the proper folder and restore the file. The problem is that using the DPM console, the cumbersome wizard requires about 20 mouse clicks to restore a single file and it takes 2-4 minutes to get through all the windows. This becomes very irritating when a client needs 100’s of files restored… it takes all day of redundant mouse clicks to restore the files. Therefore, I want to use a PowerShell script (and I’m a novice at PowerShell) to automate this process. I want to be able to create a script that I pass in a file name, a folder, a recovery point date (and a protection group/server name if needed) and simply have the file restored back to its original location with some sort of success/failure notification. I thought it was a simple basic task of a backup solution, but I am having a heck of a time finding the right code. I have seen the sample code at http://social.technet.microsoft.com/wiki/contents/articles/how-to-use-a-windows-powershell-script-to-recover-an-item-in-data-protection-manager.aspx that I have tried to follow, but it doesn’t accomplish what I really want to do (it’s too simplistic) and there are errors in the sample code. Therefore, I would like to get some help writing a script to restore these files. An example of the known values to restore the data are: DPM Server: BACKUP01 Protection Group: Document Repository Data Protected Server: FILER01 File Path: R:\DocumentRepository\ToBackup\ClientName\Repository\2010\07\24\filename.pdf Date Deleted: 8/2/2010 (last recovery point = 8/1/2010) Bonus Points: If you can help me not only create this script, but also show me how to automate by providing a text file with the above information that the PowerShell script loops through, or even better, is able to query our SQL server for the needed data, then I would be more than willing to pay for this development.

  Read the article

• Monitoring slow nginx/unicorn requests

  - by injekt

  I'm currently using Nginx to proxy requests to a Unicorn server running a Sinatra application. The application only has a couple of routes defined, those of which make fairly simple (non costly) queries to a PostgreSQL database, and finally return data in JSON format, these services are being monitored by God. I'm currently experiencing extremely slow response times from this application server. I have another two Unicorn servers being proxied via Nginx, and these are responding perfectly fine, so I think I can rule out any wrong doing from Nginx. Here is my God configuration: # God configuration APP_ROOT = File.expand_path '../', File.dirname(__FILE__) God.watch do |w| w.name = "app_name" w.interval = 30.seconds # default w.start = "cd #{APP_ROOT} && unicorn -c #{APP_ROOT}/config/unicorn.rb -D" # -QUIT = graceful shutdown, waits for workers to finish their current request before finishing w.stop = "kill -QUIT `cat #{APP_ROOT}/tmp/unicorn.pid`" w.restart = "kill -USR2 `cat #{APP_ROOT}/tmp/unicorn.pid`" w.start_grace = 10.seconds w.restart_grace = 10.seconds w.pid_file = "#{APP_ROOT}/tmp/unicorn.pid" # User under which to run the process w.uid = 'web' w.gid = 'web' # Cleanup the pid file (this is needed for processes running as a daemon) w.behavior(:clean_pid_file) # Conditions under which to start the process w.start_if do |start| start.condition(:process_running) do |c| c.interval = 5.seconds c.running = false end end # Conditions under which to restart the process w.restart_if do |restart| restart.condition(:memory_usage) do |c| c.above = 150.megabytes c.times = [3, 5] # 3 out of 5 intervals end restart.condition(:cpu_usage) do |c| c.above = 50.percent c.times = 5 end end w.lifecycle do |on| on.condition(:flapping) do |c| c.to_state = [:start, :restart] c.times = 5 c.within = 5.minute c.transition = :unmonitored c.retry_in = 10.minutes c.retry_times = 5 c.retry_within = 2.hours end end end Here is my Unicorn configuration: # Unicorn configuration file APP_ROOT = File.expand_path '../', File.dirname(__FILE__) worker_processes 8 preload_app true pid "#{APP_ROOT}/tmp/unicorn.pid" listen 8001 stderr_path "#{APP_ROOT}/log/unicorn.stderr.log" stdout_path "#{APP_ROOT}/log/unicorn.stdout.log" before_fork do |server, worker| old_pid = "#{APP_ROOT}/tmp/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # someone else did our job for us end end end I have checked God status logs but it appears CPU and Memory Usage are never out of bounds. I also have something to kill high memory workers, which can be found on the GitHub blog page here. When running a tail -f on the Unicorn logs I see some requests, but they're far and few between, when I was at around 60-100 a second before this trouble seemed to have arrived. This log also shows workers being reaped and started as expected. So my question is, how would I go about debugging this? What are the next steps I should be taking? I'm extremely baffled that the server will sometimes respond quickly, but at others time it's very slow, for long periods of time (which may or may not be peak traffic times). Any advice is much appreciated.

  Read the article

• How can you know what is w3wp.exe doing? (or how to diagnose a performance problem)

  - by Daniel Magliola

  I'm having a performance problem in a site we've made, and I'm not exactly sure how to start diagnosing it. The short description is: We have a very small site (http://hearablog.com) with very little traffic, in a crappy dedicated server, CPU is always very high, sometimes it stays at 100% for minutes, and w3wp.exe is taking most of it. A typical scenario is w3wp.exe takes 60%, and SQL Server takes about 30%. Our DB is pretty small too. Long description and more details: The site is hosted in a very crappy server by Cari.Net. From the beginning we had the feeling that the server didn't quite behave correctly, like some things would take just too long, so this could be a configuration problem from the get go. It may also be that we are getting a virtual server while we're supposed to have a dedicated one, although we have no evidence that'd indicate this, except for the fact that the server tends to be quite slow. The server is Windows 2008 Standard 64-bit, with SQL 2008 Express Hardware is a Celeron 2.80 GHz, 1Gb RAM The website is developed in ASP.Net MVC, using Entity Framework for data access. Now, this is pretty crappy hardware, but i've had other servers with these guys, with equivalent (or worse) HW, and performance is much better than this one. That said, the other servers have W2003 and SQL2005, and I'm using ASP.Net "WebForms" 2.0, no MVC, no LINQ, no EF; so I'm not sure whether going to 2008 / the other stuff means a big performance penalty is expected. I'm serving MP3 files (5-20 Mb) regularly, which is a slightly unusual load, maybe that is causing some kind of problems? Would that cause w3wp to use a lot of CPU? Disk usage seems very low. Memory is usually around 90%, but disk usage seems to indicate it's not paging much. I get tons of e-mails every day about SQL timeouts, for queries taking over 30 seconds, although all our queries are pretty straightforward (or should be, but EF may be screwing it up). This is what resource monitor looks like in one of these "sprints" of 100% CPU, in case there's anything useful there. And a snapshot of some performance counters: Now, what confuses me very much is that CPU usage of w3wp is just so high. It shouldn't be doing much really... So my questions are... Is there any way of finding out "what" it is doing? Maybe even profile it? Any performance counters I should be looking at? Is this to be expected given this hardware/software configuration? Is this could be cause by some kind of configuration failure, where would you start looking? Thank you VERY much. Daniel Magliola

  Read the article

• VMware Workstation reboot 32-bit host when starting 32/64-bit guest using VT-x

  - by Powerman

  I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas? Update 1: I've tried to boot vt.iso provided at http://communities.vmware.com/docs/DOC-8978 and here is it report: CPU 0: VT is enabled on this core CPU 1: VT is enabled on this core Update 2: I've just tried to boot 32-bit guests (Windows7, Ubuntu9.04 and Gentoo) using all possible virtualization modes. In Automatic, Automatic with Replay, Binary translation everything works, in Intel VT-x/EPT or AMD-V/RVI I got message "This host does not support EPT. Using software virtualization with a software MMU." and everything works. BUT in Intel VT-x or AMD-V mode all 32-bit guests reset host just like 64-bit guests! So, this issue is not specific to 64-bit guests. One more thing. Using Intel VT-x or AMD-V mode for both 32/64-bit guests my host reset right after starting VM, i.e. before VM BIOS POST and before guest even start booting. But using Intel VT-x/EPT or AMD-V/RVI VM BIOS runs ok, then 64-bit guests start booting (Windows7 completed "Loading files" progressbar), and only after that host reset.

  Read the article

• Automating the choice between JPEG and PNG with a script

  - by MHC

  Choosing the right format to save your images in is crucial for preserving image quality and reducing artifacts. Different formats follow different compression methods and come with their own set of advantages and disadvantages. JPG, for instance is suited for real life photographs that are rich in color gradients. The lossless PNG, on the other hand, is far superior when it comes to schematic figures: Picking the right format can be a chore when working with a large number of files. That's why I would love to find a way to automate it. A little bit of background on my particular use case: I am working on a number of handouts for a series of lectures at my unversity. The handouts are rich in figures, which I have to extract from PDF-formatted slides. Extracting these images gives me lossless PNGs, which are needlessly large at times. Converting these particular files to JPEG can reduce their size to up to less than 20% of their original file size, while maintaining the same quality. This is important as working with hundreds of large images in word processors is pretty crash-prone. Batch converting all extracted PNGs to JPEGs is not an option I am willing to follow, as many if not most images are better suited to be formatted as PNGs. Converting these would result in insignificant size reductions and sometimes even increases in filesize - that's at least what my test runs showed. What we can take from this is that file size after compression can serve as an indicator on what format is suited best for a particular image. It's not a particularly accurate predictor, but works well enough. So why not use it in form of a script: I included inotifywait because I would prefer for the script be executed automatically as soon as I drag an extracted image into a folder. This is a simpler version of the script that I've been using for the last couple of weeks: #!/bin/bash inotifywait -m --format "%w%f" --exclude '.jpg' -r -e create -e moved_to --fromfile '/home/MHC/.scripts/Workflow/Conversion/include_inotifywait' | while read file; do mogrify -format jpg -quality 92 "$file" done The advanced version of the script would have to be able to handle spaces in file names and directory names preserve the original file names flatten PNG images if an alpha value is set compare the file size between the temporary converted image and its original determine if the difference is greater than a given precentage act accordingly The actual conversion could be done with imagemagick tools: convert -quality 92 -flatten -background white file.png file.jpg Unfortunately, my bash skills aren't even close to advanced enough to convert the scheme above into an actual script, but I am sure many of you can. My reputation points on here are pretty low, but I will gladly award the most helpful answer with the highest bounty I can set. References: http://www.formortals.com/introducing-cnb-imageguide/, http://www.turnkeylinux.org/blog/png-vs-jpg Edit: Also see my comments below for some more information on why I think this script would be the best solution to the problem I am facing.

  Read the article

• Windows explorer locks files

  - by John Prince

  I'm using Office 2010 & Windows 7 Home Premium 64-bit. My problem starts when I attempt to save e-mail messages to my PC that I have received via Outlook (my ISP is Comcast). I'm using the default .msg file extension option when I attempt to save these e-mails. The resultant files are locked and do not show the normal "envelope" icon. Instead, it’s a “blank page” icon with the right upper corner folded in. These files refuse to open either by double clicking on them or right clicking and trying to open them with Outlook. And when I return to Outlook, I discover that Outlook is now hung up and I have to close it via the Task Manager. To make matters worse, I’ve also discovered that every e-mail message that I've saved on my PC over the years has also somehow become locked and their original "envelope" icon has been replaced with the "blank page" icon. I found and installed an application called LockHunter. As a result, when I right click on a saved and locked e-mail message, I’ve given an option to find out what's locking it. Each time I'm told that the culprit is Windows explorer.exe. When I unlock the file the normal envelope icon is sometimes displayed (but not always) but at least the file can then be opened. But the file is still “squirrely” as it can’t be moved or saved to a folder until it’s unlocked again. On this second attempt, LockHunter says it’s now locked by Outlook.exe. By the way, I don't have this issue when I save Word, Excel & PowerPoint files; only with Outlook. I've exhausted every remedy that I can think of including: making sure that the file and folder options are checked to always show icons and not thumbnails; running the Windows 7 & Office 2010 repair options which find nothing amiss; running a complete system scan with Windows Malicious Software Removal Tool with negative results; verifying that Outlook is the default for opening e-mails; updating all of my applications via Secunia Personal Software Inspector; uninstalling every application that I felt was unnecessary; doing a registry cleanup via CC Cleaner; having Windows Security Essentials always on (it did find one Java Trojan recently which was quarantined and then deleted); uninstalling a bunch of non-Microsoft shell extensions; and deactivating all of the Outlook Add-ins and then re-activating each one. None of this solves the problem. I’d welcome any advice on how to resolve this.

  Read the article

• What is a good method to solve cabal install problems?

  - by sp3ctum

  I've used the cabal package manager for Haskell programs to install libraries and new projects that I've cloned from some repositories. More often than not, I keep running into problems. Most projects make installing them seem super easy, but in my case that's not always true - sometimes they are very hard to get running. Some are so hard, in fact, that I've lost interest in the project solely because of not being able to install it. So instead of complaining, I'd like to ask what I should do to better this situation. I'd like to use my most recent problem as an example. I'm interested in trying out the Gitit project. It's a promising looking personal wiki that runs on various version control systems. So here's what I've done: Clone from Github run cabal install in the project directory like I'm told on the project install page: mika@eka:~/git/gitit$ ls BLUETRIP-LICENSE CHANGES HCAR-gitit.tex LICENSE Network README.markdown RELANN-0.6.1 Setup.lhs TANGOICONS YUI-LICENSE data expireGititCache.hs gitit.cabal gitit.hs plugins mika@eka:~/git/gitit$ cabal install Resolving dependencies... cabal: cannot configure happstack-server-7.0.7. It requires base64-bytestring ==1.0.* For the dependency on base64-bytestring ==1.0.* there are these packages: base64-bytestring-1.0.0.0. However none of them are available. base64-bytestring-1.0.0.0 was excluded because gitit-0.10 requires base64-bytestring ==0.1.* mika@eka:~/git/gitit$ So now I'm thinking: well, I'll install happstack-server on its own, maybe that will work: mika@eka:~/git/gitit$ cabal install happstack-server Resolving dependencies... Warning: happstack-server.cabal: Ignoring unknown section type: test-suite Configuring happstack-server-7.0.7... cabal: At least the following dependencies are missing: blaze-html ==0.5.*, hslogger >=1.0.2, monad-control ==0.3.*, network >=2.2.3, sendfile >=0.7.1 && <0.8, system-filepath >=0.3.1, text >=0.10 && <0.12, threads >=0.5, transformers-base ==0.4.* cabal: Error: some packages failed to install: happstack-server-7.0.7 failed during the configure step. The exception was: ExitFailure 1 So looks like there are some dependencies missing. But isn't installing these dependencies the whole point of using cabal in the first place? What should I do? File bug reports (to which project?), install the dependencies manually or something else? Bonus points for explaining what causes these kinds of problems.

  Read the article

• DNS problems with Google on Windows 7

  - by awishformore

  Hello dear superuser community. I had no idea where to post this because it is a problem that completely baffles me. I have a lot of experience with network configuration, but I am completely out of ideas on how to fix this. I have a Fritz!Box branded router on my ISP 1&1 in Germany. My computer is connected to it with a normal Ethernet cable. I always manually set my IP on the computer and use the Google DNS servers for name resolution. I also tried OpenDNS and the result is the same. With that configuration the following happens: Google search responds with big delay Gmail, Google Calendar & Google Drive requests time out the majority of the time In order to troubleshoot, I set the network connection to DHCP for both IP & DNS. At that point, what happens is the following: Google search times out most of the time Gmail, Google Calendar & Google Drive work most of the time Sometimes, it happens that the sites that time out will come up, but weirdly enough, the pictures on the buttons will be missing. For instance, the magnifying glass on Google will be gone or the circle arrow on Gmail (but all buttons of course). All other websites load just fine - and very quickly. All other network functionality is completely unimpacted. The behaviour of fixed IP & Google DNS vs automatic IP & DNS is easily reproducible. I am going crazy trying to fix this as I have no idea what the hell is going on at this point. Here a list of the things I have tried thus far: Flushed the DNS Tried on different browsers (Works fine on my laptop by the way) Tried disabling Teredo & IPv6 stack Emptied all caches Checked the HOSTS file Rebooted the router Reset the router Reinstalled the network adapter Tracert displayes normal route until timing out at one point Ping usually doesn't work for the unreachable sites either Ran both complete Norton 360 & Kaspersky 2012 scan Ran Kaspersky Virus Removal Tool in safe mode Tried connection in safe mode & networking enabled If you have any ideas, please let me know. I'm getting desperate...

  Read the article

• "The system time has changed" avents after waking from sleep

  - by Damir Arh

  Sometimes when my computer running Windows 7 wakes up from sleep, it has to adjust the time. When this happens the following system event is logged: <Event xmlns='http://schemas.microsoft.com/win/2004/08/events/event'> <System> <Provider Name='Microsoft-Windows-Kernel-General' Guid='{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}'/> <EventID>1</EventID> <Version>0</Version> <Level>4</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000010</Keywords> <TimeCreated SystemTime='2010-03-06T19:09:57.500000000Z'/> <EventRecordID>10672</EventRecordID> <Correlation/> <Execution ProcessID='4' ThreadID='56'/> <Channel>System</Channel> <Computer>GAME</Computer> <Security/> </System> <EventData> <Data Name='NewTime'>2010-03-06T19:09:57.500000000Z</Data> <Data Name='OldTime'>2010-03-06T17:34:32.870117200Z</Data> </EventData> <RenderingInfo Culture='sl-SI'> <Message>The system time has changed to ?2010?-?03?-?06T19:09:57.500000000Z from ?2010?-?03?-?06T17:34:32.870117200Z.</Message> <Level>Information</Level> <Task></Task> <Opcode>Info</Opcode> <Channel>System</Channel> <Provider>Microsoft-Windows-Kernel-General</Provider> <Keywords> <Keyword>Time</Keyword> </Keywords> </RenderingInfo> </Event> When this happens (I noticed it twice until now) the old time always corresponds to the time when computer entered sleep. The problem is that if Windows Media Center is scheduled for recording during this time, it just skips it as if the computer was turned off. I never had this problem running Windows Vista on the same machine. Any ideas what could be causing this problem and how to solve it are welcome.

  Read the article

• All the Gear and No Idea: Suggestions for re-designing my home/office/entertainment network

  - by 5arx

  Help/ Advice/ Suggestions please: I have a load of kit that I love but which currently operate in disconnected, sometimes counter-productive way. Because I never really had a masterplan I just added these things one after another and connected them up in ad hoc ways. Since I bought my Macbook I've found I spend much less time on the MacPro that was until then my main machine. Perversely, as my job involves writing .Net software, I spend a lot of Mac time actually inside a Windows 7 VM. I stream media from the HP box to the PS3 and thus to the TV, but its not without its limitations/annoyances. We listen to each other's iTunes libraries but the music files are all over the place and it would be good to know they were all safely in one location (and fully backed up). I need to come up with a strategy that will allow me to use all the kit for work, play (recording live music, making tunes, iMovie work), pushing/streaming media to the TV and sharing files with my other half (she uses a Windows laptop and her iPod touch). Ideally I'd like to be able to work on any of the machines and have a shared homedrive that was visible to all machines so all my current files were synced up wherever i was. It would be great if I could access everything securely and quickly over the web. I'd also like to be able to set up a background backup process. The kit list thus far: Apple MacPro 8GB/3x250GB RAID0 + 1TB Apple MacBook Pro 13" 8GB/250GB - I spend a lot of my work time on a Windows 7 VM on this. Crappy Acer laptop (for children's use - iPlayer, watching movies/tv files) HP Proliant Server 4GB/80GB+160GB+300GB Sun Ultra 10 2 x 80GB (old, but in top-notch condition) PS3 160GB iPod Classic 2 x 8GB iPod Touch Observations: Part of the problem is our dual use of Windows and OS X - we can't go for a pure NT style roaming profile. Because the server is also used for hosting test/beta applications and a SQL Server db, it can't be dedicated to file serving. The two Macs really could do with sharing a roaming profile or similar. I'd love to be able to do something useful with the Ultra 10. My other half has been trying to throw it away for over five years now and regularly ask what function it serves in my study :-( I've got no shortage of 500GB external USB hard drives iMovie files are very large and ideally would be processed on a RAID system. Apple's TimeMachine isn't so great. If anyone could suggest all or part of a setup that would fulfil some of my requirements I'd be very grateful. I am willing to consider purchasing one or two more bits of kit (an Apple TV and a Squeezebox have been moted by friends) if they will help make efficiencies rather than add to the chaos and confusion. Thanks for looking.

  Read the article

• Configure Postfix to Port other than 25

  - by bwheeler96

  I've done quite a bit of googling on how to reconfigure postfix to work on a different port, but I still can't fond the line(s) people keep talking about in my master.cf. I'm using OS X Mountain Lion, and my ISP blocks traffic both ways on port 25. people have said to look for a line that says smtp inet n - n - - smtpd I can't find it. This is (what I believe to be) unmodified # ==== Begin auto-generated section ======================================== # This section of the master.cf file is auto-generated by the Server Admin # Mail backend plugin whenever mails settings are modified. smtp inet n - n - 1 postscreen smtpd pass - - n - - smtpd dnsblog unix - - n - 0 dnsblog tlsproxy unix - - n - 0 tlsproxy submission inet n - n - - smtpd -o smtpd_tls_security_level=encrypt smtp unix - - n - - smtp # === End auto-generated section =========================================== # Modern SMTP clients communicate securely over port 25 using the STARTTLS command. # Some older clients, such as Outlook 2000 and its predecessors, do not properly # support this command and instead assume a preconfigured secure connection # on port 465. This was sometimes called "smtps", but such usage was never # approved by the IANA and therefore conflicts with another, legitimate assignment. # For more details about managing secure SMTP connections with postfix, please see: # http://www.postfix.org/TLS_README.html # To read more about configuring secure connections with Outlook 2000, please read: # http://support.microsoft.com/default.aspx?scid=kb;en-us;Q307772 # Apple does not support the use of port 465 for this purpose. # After determining that connecting clients do require this behavior, you may choose # to manually enable support for these older clients by uncommenting the following # four lines. #465 inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - smtp pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify sacl-cache unix - - n - 1 sacl-cache flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants.

  Read the article

< Previous Page | 289 290 291 292 293 294 295 296 297 298 299 300  | Next Page >