Search Results

Search found 21650 results on 866 pages for 'voice command'.

Page 294/866 | < Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >

• How to rsync a large file, with as little CPU and bandwidth expense as possible?

  - by Johan Allgoth

  I have a 500 GB file that I plan on backing up remotely. The file changes often. I'll be rsyncing it from a desktop to a server. Both can run rsync client or server. What is the proper command for this? The ones I've tried sofar has been taking forever or simply acted strange. Example and results: rsync -cv --partial --inplace --no-whole-file /desktop/file1 myserver.com::module/file1 Seems to work, but only if I do it twice (?!). Also, slow. Does the above command do the checksumming on both computers, or only on the sending one? Is it correct otherwise?

  Read the article

• Error when installing ubuntu-zfs

  - by ubiquibacon

  I'm switching from FreeNAS to Ubuntu 12.04 LTS. After a vanilla install of Ubuntu has been completed I run the following commands in the order shown to install ZFS: apt-get install python-software-properties add-apt-repository ppa:zfs-native/stable apt-get -y -q update && apt-get -y -q upgrade apt-get install ubuntu-zfs When the last command is run ZFS is installed and seems to be working correctly... mostly (more on that later). However, when the last command is run I get this error (full log here): configure: error: *** Please make sure the kmod spl devel <kernel> package for your *** distribution is installed then try again. If that fails you *** can specify the location of the spl objects with the *** '--with-spl-obj=PATH' option. What is this error and how do I fix it? Now I said mostly earlier because my pool's don't auto mount when the server restarts the way they should. All my reading (mostly from this page) indicates that mountall should just take care of the mounting. I have followed the instructions on that page and I cannot get mountall to work correctly. My pools will only auto mount on restart if I edit /etc/fstab or change the ZFS_MOUNT and ZFS_UNMOUNT options in /etc/default/zfs.

  Read the article

• How to send a pipe with psexec?

  - by Pierre-Alain Vigeant

  I'm trying to execute a pipe on a remote server by using psexec. The command that I'm trying to execute is psexec \\servername DSQUERY USER -name *userpart* | DSGET USER -samid -display Currently, the | pipe symbol get executed locally which is not what is wanted (since dsget does not exist on my machine). I tried to use quote around the whole command psexec \\servername "DSQUERY USER -name *userpart* | DSGET USER -samid -display" but that resulted in psexec trying to run that whole quoted sentence as one executable, which obviously does not exist. How can I pass a pipe symbol to the remote server so that it can execute it?

  Read the article

• How can I programmatically change the keyboard layout?

  - by Jason R. Coombs

  I want to run a shell command or script that will configure each of my Ubuntu Precise boxes to use the Dvorak keyboard layout as the default (and only) layout. With earlier versions, I was able to set the XKBVARIANT in /etc/default/keyboard but when I make this change in Precise (and reboot), the keyboard layout appears to be unaffected (both in console and in gnome). I tried also setting the XKBMODEL to pc105 and XKBLAYOUT to us, but that did not seem to help. I know I can set the layout for gnome using the 'keyboard layout' tool... but I want the change to affect the console, and I want to automate the process. How can I accomplish this? Edit: To clarify, I want to know how I can cause to change (using only a script or command-line) the keyboard layout to be Dvorak as the default and only keyboard layout for both Gnome and the console. I want this change to be persistent (survive reboots), just as it is when the change is made through the Keyboard Layout tool. Edit: Let me put it another way. If I had installed the operating system myself (which I did not because the OS was installed by the virtual machine infrastructure), I could have selected the desired keyboard layout at install time, and that layout would be applied persistently, system-wide. How can I change the layout to appear as if I had set it during the install process?

  Read the article

• How do I update my servers' domain name for Reverse DNS?

  - by Jeff

  I'm updating my mail servers' rDNS and I think I have it all figured out except for one thing. When I installed my OS (Debian Etch), the installer asked me to enter the "domain name". Is the "domain name" updated by using the hostname command? If so, which config file(s) are updated when using the hostname command? If not, how do I change my servers' domain name? My current /etc/hosts: 127.0.0.1 localhost 67.228.178.164 mrspock.example-old.com mrspock My current /etc/hostname: mrspock $ hostname -f mrspock.example-old.com I need to update hostname -f to be mrspock.example-new.com.

  Read the article

• After upgrading to trusty, ALSA midi connection (aconnect) doesn't seem to work right

  - by SougonNaTakumi

  Previously in kubuntu 13.10 I was able to open vmpk or plug in a midi keyboard, and provided that TiMidity was running in server mode, I could run aconnect [keyboard port (129:0 for vmpk)] 14:0 aconnect 14:0 128:0 and I could play the keyboard and get sound. But now, a while after upgrading to trusty, I tried to do that, and didn't get any sound. TiMidity itself still plays files fine, but if I try to play them with aplaymidi, I still just get silence. Oddly, the midi files are clearly being read. When I ran (where 130:0 was vmpk's input port) aplaymidi -p 130:0 ~/path/to/midi.mid vmpk was highlighting notes on the piano as if it were playing the midi. One time I tried this, TiMidity (?) very briefly played a fraction of a second of the first chord of my song before everything went silent and vmpk just highlighted the first voice on the keyboard as usual. Now the weirdest part of this is that probably about 40% of the time, when I've played at least one note with either aplaymidi or vmpk, when I run aconnect -x I get a sudden burst of a note or chord from my speakers (that is, if I played one note, I get a note; if I played multiple sequential notes, they turn into a chord), as if the notes were being queued up but not being played and that somehow liberated them. I have no idea what's going on there. A little while ago I remember having a problem with Audacity playing wav files sped up and also locking up if I tried to pause it, which it stopped doing when I set the audio devices to the actual audio devices rather than pulse. But now when I checked again, it's doing the opposite: it won't play audio at all and/or acts weirdly if I don't set the audio devices to pulse, and either way will very occasionally randomly do the speeding up thing regardless. Oddly in the midst of what's looking like a pretty screwed up sound system, sound in VLC and Firefox has been working fine and if I play a wav file with aplay ~/path/to/sound.wav that works fine too. Any idea what I could do to figure out what's wrong with ALSA and/or fix it?

  Read the article

• How do I modify these VPN connection settings for Xfce?

  - by Dave M G

  I have signed up for a VPN (Virtual Private Network) service, and I configured it for use on my computer that runs Gnome Classic with the following instructions: In Terminal, install openvpn packages with sudo apt-get install network-manager-openvpn. 1. Restart the network manager with sudo restart network-manager 2. Run sudo wget https://www.xxxxxxx.com/ovpnconfigure.zip 3. Extract the files from the zip with unzip ovpnconfigure.zip. 4. Move cert.crt to /etc/openvpn 5. Open the Network Manager on the menu bar. 6. Choose add and select the OpenVPN connection type, and click Create. 7. Enter Private Internet Access SSL for the Connection Name. 8. Enter xxxxxx.xxxxxxxx.com for the Gateway 9. Select Password and enter your login credentials. 10. Browse and select the CA Certificate we saved in Step 3. 11. Choose Advanced and enable LZO Compression. 12. Apply and exit. 13. Connect using the Network Manager. It worked, but now I want to set up access to the same VPN service on another machine that runs Mythbuntu, which uses Xfce as its desktop manager. So every point from 5 on doesn't apply. How can I modify the above instructions so that I can get my VPN service working with Xfce. As a further note, while I can access the Xfce desktop directly if I need to, it's more convenient for me to access it via the command line and SSH from on of my other computers. A command line process would be ideal. (I looked for this, and found instructions only for PPTP access, whereas I need OpenVPN.)

  Read the article

• opennebula 3.4 in debian squeeze

  - by Jin Splif

  hope can get some advise n help.... currently I am installing opennebula 3.4 in debian squeeze everything have being successful where I am able to access the opennebula sunstone webpage localhost:9869 , use one command but when I tried to create a host the status become error... hope someone can assist me on this thanks sample log Monitoring host abc (0) [InM][I]: Command execution fail: 'if [ -x "/var/tmp/one/im/run_probes" ]; then /var/tmp/one/im/run_probes kvm 0 abc; else exit 42; fi' [InM][I]: ssh: Could not resolve hostname abc: Name or service not known [InM][I]: ExitCode: 255 [InM][E]: Error monitoring host 0 : MONITOR FAILURE 0 -

  Read the article

• Is there a Windows 7 equivalent to the *NIX ability to create a hard link to /dev/null?

  - by minameismud

  I saw another question here that the Windows equivalent to /dev/null is simply NUL. I also know that you can use the mklink command to make sym links (shortcuts) from the command line: MKLINK [[/D] | [/H] | [/J]] Link Target /D Creates a directory symbolic link. Default is a file symbolic link. /H Creates a hard link instead of a symbolic link. /J Creates a Directory Junction. Link specifies the new symbolic link name. Target specifies the path (relative or absolute) that the new link refers to. When I try to use the /j switch to make a hard link ("junction") instead of a simple shortcut to NUL, I get: C:\>mklink /j "C:\Program Files\MyNewHardlinkFolder" NUL Local volumes are required to complete the operation. I can create shortcuts to NUL all day long using the /d switch, but I would much prefer the hard link. Any ideas?

  Read the article

• Who keeps removing that file?

  - by mgerdts

  Over the years, I've had many times when some file gets removed and there's no obvious culprit.  With dtrace, it is somewhat easy to figure out:  #! /usr/sbin/dtrace -wqs syscall::unlinkat:entry /cleanpath(copyinstr(arg1)) == "/dev/null"/ {         stop();         printf("%s[%d] stopped before removing /dev/null\n", execname, pid);         system("ptree %d; pstack %d", pid, pid); } That script will stop the process trying to remove /dev/null before it does it.  You can allow it to continue by restarting (unstopping?) the command with prun(1) or killing it with kill -9.  If you want the command to continue automatically after getting the ptree and pstack output, you can add "; prun %d" and another pid argument to the system() call.

  Read the article

• XCP vm created via xl create doesn't show up in Xencenter neither in xe vm-list

  - by user138664

  i am running XCP 1.4.90.530.170661 and i have many PV guests running and created via XenCenter. I have created now an openwrt PV guest via the xl create command but it doesn't show up in Xencenter neither in the vm-list command: xe vm-list uuid ( RO) : 6d29aac1-67ff-f83e-4dbc-894a3b6b9c10 name-label ( RW): slitaz power-state ( RO): running uuid ( RO) : 07d96dd1-8223-cd1c-587d-ae37e48d267b name-label ( RW): xen-centos6 power-state ( RO): running uuid ( RO) : 3164bcf1-e43c-badb-e0cf-5423751fffb9 name-label ( RW): xenwin7 power-state ( RO): running uuid ( RO) : 8a31725e-4bcb-48ac-ba7b-e7c1ba310789 name-label ( RW): Control domain on host: xen-mini power-state ( RO): running xl list Name ID Mem VCPUs State Time(s) Domain-0 0 300 2 r----- 4862.5 xenwin7 2 766 1 -b---- 4933.1 slitaz 10 255 1 -b---- 30.8 xen-centos6 11 767 1 -b---- 46.9 openwrt 12 32 1 -b---- 6.8 are these two different kinds of PV vm? if yes, is there a way to export the "xl create" one as xva/ova and import it to show up like the others? Thanks in advance, /c/

  Read the article

• GRUB2 UEFI booting from LVM on RAID (with XEN)

  - by pavian

  I'm experimenting with booting root fs from LVM volume inside the raid (mdraid superblock 1.x) via UEFI with GRUB2. Also I'm using Xen hypervisor. From grub command line I can see my lvm volume (ls command) but I got kernel panic due to "unable to mount root fs". I saw a note in this article telling it's probably impossible to boot root fs from raid via UEFI, but I don't understand the reason why not. Is it possible to boot linux with this configuration without the initramfs (which I don't won't to use)?

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• Installing Java 6 on Ubuntu 10.04 fails on missing Java 6 JRE package

  - by David S

  I'm trying to install Java 6 on Ubuntu 10.04 and it's been harder than it should be. In another question about installing Java on Ubuntu/Linux it said that I needed to do the following: sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" However, that failed and I kept getting: sudo: add-apt-repository: command not found The solution to this, was to run: sudo apt-get install python-software-properties So, that seemed to work and the command above to "add-apt-repository" seems to complete with no errors. And I have run the following to confirm it got added. sudo vi /etc/apt/sources.list But, now when I run the following: sudo apt-get install sun-java6-jre I get: Reading package lists... Done Building dependency tree Reading state information... Done Package sun-java6-jre is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package sun-java6-jre has no installation candidate Where do I go from here?

  Read the article

• Why is apt-cache so slow?

  - by Damn Terminal

  After upgrade to Trusty (14.04) from Saucy (13.10), all apt operations are very slow. Even those that do not include downloading anything, or connecting to any servers. For example, displaying the apt policy # time apt-cache policy [...] real 0m8.951s user 0m5.069s sys 0m3.861s takes almost ten seconds! Mostly a weird lag right after issuing the command. And it's the same even if I issue the same command again. On another system it doesn't take a tenth of a second real 0m0.096s user 0m0.070s sys 0m0.023s The other system is a little beefier but there was no noticeable difference before the upgrade. It's the same with apt-get, anything apt-related. How do I find out the source of this lag and fix it? Additional info: # cat /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis BTW is my understanding of how apt-cache works correct? It doesn't make any network connections when I run apt-cache policy, right? In case I'm wrong and it matters, here are my sources https://gist.github.com/anonymous/02920270ff68e23fc3ec

  Read the article

• environment variable issue in shell

  - by George2

  I am using Red Hat Linux Enterprise 5. I know the theory that -- using export to set environment variable, the environment variable will apply to current and child environment, but without using export to set environment variable, the environment variable will only apply to the current environment. My confusion is, what is the exact definition of "child environment" and "current environment"? For example, $ var1=123 $ echo "Hello [$var1]" the value of var1 (which is 123) is printed in shell, but I think echo is a command invoked by current shell, and it (the echo command) should be a child environment of current shell and the value of var1 should not (because not using export var1=123) impact echo. Any comments? Thanks in advance!

  Read the article

• How can I copy a SQL Azure Database to a server on a different subscription?

  - by Tragedian

  I'm trying to create a copy of a SQL Azure database. The source and destination servers are associated with two different subscriptions, but they are located in the same data-centre. I've been reading Copying Databases in Windows SQL Azure Database and How to: Copy Your Databases (Windows Azure SQL Database) for instructions on this, but I'm not sure if my scenario is covered. I would like to use the CREATE DATABASE Database1B AS COPY OF Database1A; command, but I don't know what the implications are on the accounts used, or what I need to set up between the two databases before this command is possible. Has anybody achieved this type of copy and can elaborate?

  Read the article

• Impacting the Future through Collaboration at Alliance 14

  - by Jeb Dasteel-Oracle

  We’re hearing good things about the Alliance 14 conference held in Las Vegas by the Higher Education Users Group (HEUG) back in March. For those of you who aren’t familiar with Alliance 14 conferences, they are global events dedicated to enhancing and educating its members and the world on how higher educational institutions can utilize Oracle applications to change how they do business. The HEUG is an all-volunteer organization made up of individuals who collaborate with Oracle as part of the evolving higher education industry. Conference participants network with peers from other institutions (regionally and globally) to share the challenges; discuss solutions and ideas, and collaborate on HEUG strategic initiatives. The HEUG enables each institution to be a part of the ever-changing Oracle landscape. Watch the video below and hear directly from the attendees about their experience with Oracle and how being part of the HEUG has allowed them to  collaborate with one of their most importance resources... and with each other. Oracle is committed to fostering a strong and independent network of user groups worldwide. Currently over 900+ groups provide dynamic forums for customers to share information, experiences and expertise. If you’re interested in more information or joining an Oracle User Group, click and become part of a vibrant network of engaged users finding the best ways to get the most value from their Oracle investment and collaborating to provide a unified feedback voice to Oracle. Catch you next time, Jeb

  Read the article

• Scanning php uploads in tmp directory with clamdscan fails

  - by Nikola

  I can't seem to get this thing to work, some permission problem maybe, but i can't even run clamdscan normally form console with root the result is always Permission denied. for example i create a file test.txt (eicar file) in /tmp and execute "clandscan /tmp/test.txt" in console logged in as root and i get "/tmp/test.txt: Access denied. ERROR ". The clamd demon is running with user clamav could that be the reason? Now i want to scan the same file (/tmp/test.txt) via php , so i run (i have chowned the file to apache:apache ) $cmd="clamdscan /tmp/test.txt"; exec($cmd,$a,$b); i get error 127 i try with the full path of the command /usr/bin/clamdscan i get error 126 (command is found but is not executable), this means that apache doesn't have the permission to execute /usr/bin/clamdscan ? what could be the problem?

  Read the article

• Colored PS1 string

  - by Will Vousden

  Clarification: I want __foo to be executed each time the PS1 string is presented in the terminal, not when the PS1 string is constructed (hence its being in quotes). __foo contains logic that examines the current directory, so its execution must be deferred. I'm trying to use different colours in my Bash PS1 string from within a Bash function: LIGHTRED="\033[1;31m" LIGHTGREEN="\033[1;32m" RESET="\033[m" __foo () { # Do some stuff and genereate a string to echo in different colours: echo -n '\['$1'\]firstcolour \['$2'\]secondcolour' } PS1='$(__foo '$LIGHTRED' '$LIGHTGREEN')\['$RESET'\] \$' Essentially I want __foo to generate part of the PS1 in a bunch of different colours. My attempt doesn't seem to work, though; it produces the following output: -bash: 31m: command not found -bash: 32m: command not found \[]firstcolour \[\]secondcolour $ What gives, and how can I fix it?

  Read the article

• What is wrong with my expect script?

  - by Bryan

  I'm trying to learn how to use the expect command, to help me automate deployment of some software via shell scripts, and figured I start with something simple to get me started. I've created a file in my home dir called 'foo' using: touch foo And I've created the following script saved as test.exp #!/usr/bin/expect spawn rm -i foo expect "rm: remove regular empty file `foo'?" send "y\r" When I run the script using ./test.exp, it spawns the rm command, but it doesn't appear to send the Y and carriage return. I know I don't have a typo in the expect string, as I've used copy and paste to put in the script. What am I doing wrong?

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• How to use psexec without admin privileges on target machine?

  - by HighCommander4

  Is it possible to use psexec to execute a command on a remote machine without having admin privileges on the remote machine? I tried running psexec \\<machine> -u <username> -p <password>, where <username> and <password> are non-admin credentials, but I get an "access denied" error I can remote desktop into the remote machine with the same credentials without any problems. My local machine is running Windows 7 Enterprise 64-bit, and the remote machine is running Windows Server 2008 64-bit. I do have admin privileges on the local machine. EDIT: To all the people who are downvoting this question: I am not trying to circumvent any sort of security measure. I can already run the process on the remote machine by remote desktop-ing into the remote machine and running it. I'm simply looking for a command-line way to do something I can already do through a GUI.

  Read the article

• Bizarre SSH Problem - It won't even start

  - by thallium85

  I recently got Ubuntu 12.04 Precise, got it up and running with some MediaWiki software, static IP on the box and router and was able to access the main page even from a cell phone. Everything seemed great... Then I wanted to finally get rid of the monitor and keyboard and login remotely via SSH. I installed openssh-server, let everything point to port 22 for a test run and installed putty on my Windows XP machine. I got a connection refused. Went back and started checking the Ubuntu install itself... (I'm under root from this point on) $ sudo -s $ service ssh status ssh stop/waiting $ service ssh start ssh start/running, process 2212 $ service ssh status ssh stop/waiting Apparently ssh has stopped or is waiting for something.... $ ssh localhost ssh: connect to host localhost port 22: Connection refused I can't even connect to myself... I checked ufw (firewall) to see if port 22 is doing alright... $ sudo ufw status Status: active To Action From 22 ALLOW Anywhere 22/tcp ALLOW Anywhere 22 ALLOW Anywhere (v6) 22/tcp ALLOW Anywhere (v6) sshd_config shows only Port 22 Is ssh not using the right IP address at all? I just don't get what I did wrong here. When this is up and running I will def change the port number, but for now, I don't want to mess with the default install too much until a test run with putty is successful. Edit: Here are my sshd_config file and my ssh_config file. The command /usr/sbin/sshd -p 22 -D -d -e returns: /etc/ssh/sshd_config line 159: Subsystem 'sftp' already defined. Edit: @phoibus moving the sshd_config file and reinstalling did the trick! service ssh status the above command shows that ssh is now running and I am now able to log in from my windows xp computer remotely via putty. Thanks so much! I can now use my monitor for other things!

  Read the article

• How to query a DHCP server to get the local DNS servers

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

< Previous Page | 290 291 292 293 294 295 296 297 298 299 300 301  | Next Page >