Search Results

Search found 9236 results on 370 pages for 'discrete space'.

Page 295/370 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

• dd on entire disk, but do not want empty portion

  - by Jonathan Henson

  I have a disk, say /dev/sda. Here is fdisk -l: Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0000e4b5 Device Boot Start End Blocks Id System /dev/sda1 * 1 27 209920 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 27 525 4000768 5 Extended Partition 2 does not end on cylinder boundary. /dev/sda5 27 353 2621440 83 Linux /dev/sda6 353 405 416768 83 Linux /dev/sda7 405 490 675840 83 Linux /dev/sda8 490 525 282624 83 Linux I need to make an image to store on our file server for use in flashing other devices we are manufacturing so I only want the used space (only about 4gb). I want to keep the mbr etc... as this device should be boot ready as soon as the copy is finished. Any ideas? I previously had been using dd if=/dev/sda of=[//fileserver/file], but at that time, my master copy was on a 4gb flash ide.

  Read the article

• Hard drive degredation from large memory usage and paging files?

  - by Stephen R

  I've had a question(s) regarding computer degradation going through my head for a while and haven't found many good resources for researching it. 1) First off, when is the virtual RAM/paging file on a hard drive used by Windows? Is it used when the RAM is full? Or does it use the Virtual RAM/paging file as intermediate caching between the RAM and actual hard drive space all the time? 2) If I were to run many applications on my computer at the same time and have a bad habit of doing this for the entire lifetime of the computer, does it use more of the virtual RAM/paging file than if I were to have fewer programs running? Just to note, the RAM never fills up on my computer but it is used heavily. 3) By extension of question 2, if the virtual RAM/paging file is used more heavily, would that result in rapid hard drive degradation? I have seen a pattern among all of the computers that I have owned or used in the past 5 years. I am the kind of person to leave my web browser up with 40 tabs among other programs which will eat up 40% of my memory typically. Over time my computer will slow down, browsers start crashing, programs start seizing up or crashing themselves, eventually the computer becomes essentially unusable. I have been trying to rack my mind to come up with a solution other than to purchase a new PC to have it die on me in the next couple years as well. This is the only thought that has come to mind that might have a simple hardware fix...Windows ReadyBoost...Maybe? I'd like to be able to discuss this so I can learn something about all of the above. Thanks.

  Read the article

• Problems when pasting Outlook 2010 signature logo into message body

  - by Austin ''Danger'' Powers

  Whenever I paste my company logo into a message in Outlook 2010, I run into a variety of complications and anomalies. The dimensions of my original logo image are 315x174 (source image is a PNG file). I am scaling this image down in Photoshop CS6 to a variety of smaller sizes for testing my Outlook signature (300x166, 250x138, 200x110,150x83 and 100x55 pixels). 300x166 = no distortion. This looks the same as in Photoshop (but far too large to use in my signature). 250x130 = distorted (gets stretched much wider by Outlook when pasting into message body). 200x110 = looks reasonable, but seems to have been scaled to a different size (smaller) by Outlook for no obvious reason. 150x83 = for some reason, this is scaled by Outlook to the exact same size that 200x110 was scaled to. In fact, a large range of similar dimensions are scaled to the exact same image size by Outlook. This is very frustrating. Why is this happening and what can be done to prevent it? 100x55 = when pasting my logo from Photoshop to Outlook with these dimensions all that happens is the cursor jumps forwards about an inch on the screen, leaving a blank space where the image was supposed to go. Any advice would be much appreciated.

  Read the article

• SSD for swap on Ubuntu server

  - by grs

  Currently I am reading SSD reviews and I wonder how much exactly I will benefit if I move the 24 GB swap from 7200rpm HDD to SSD. Does anyone implemented swap space on SSD? Is this generally good idea? On a side note: I read that ext4 has much better performance if the journal is on SSD. Anyone with such a setup? Thanks! Edit: Here I will answer the questions posted: Occasionally, relatively rare I am hitting the swap. I know what the swap is for and that is better to get more RAM. When the server begins to swap its performance degrades (not a surprise). The idea is if I have few memory hungry processes running, to improve the overall system performance at that time, using SSD for swap, instead of slower rotational media. At the end - I want to be able to login faster and check the server state during swapping, instead of waiting on the login prompt. And of what I see SSD is cheaper per GB than RAM. Would I have better server performance during swapping (as rare it is) using SSD compared to HDD? Where 10k or 15k rpm HDDs would rate in this scenario? Thank you all for your quick and prompt answers!

  Read the article

• RAID 10 or RAID 5 for multiple VMs - what is the best choice?

  - by Lars Fastrup

  I have just ordered a new rig for my business. We do a lot of software development for Microsoft SharePoint and need the rig to run several virtual machines for development and test purposes. We will be using the free VMware ESXi for virtualization. For a start, we plan to build and start the following VMs - all with Windows Server 2008 R2 x64: Active Directory server MS SQL Server 2008 R2 Automated Build Server SharePoint 2010 Server for hosting our public Web site and our internal Intranet for a few people. The load on this server is going to be quite insignificant. 2xSharePoint 2007 development server 2xSharePoint 2010 development server Beyond that we will need to build several SharePoint farms for testing purposes. These VMs will only be started when needed. The specs of the new rig is: Dell R610 rack server 2xIntel XEON E5620 48GB RAM 6x146GB SAS drives Dell H700 RAID controller We believe the new server is going to make our VMs perform a lot better than our existing setup (2xIntel XEON, 16GB RAM, 2x500 GB SATA in RAID 1). But we are not sure about the RAID level for the new rig. Should we go for having the the 6x146GB SAS drives in a RAID 10 configuration or a RAID 5 configuration? RAID 10 seems to offer better write performance and lower risk of a RAID failure. But it comes at a cost of less drive space. Do we need RAID 10 or would RAID 5 also be a good choice for us?

  Read the article

• Dell PowerEdge T710, add a new hard disk, how to?

  - by user1340802

  I need to add a new hard disk to a PowerEdge T710 running on Vmware EXSI 4. this hard disk is a 'normal' desktop hard disk 1TB (that is it is not coming from Dell, I also have no rack for it to plug it inside any of the front bay) I would like to add this disk for a virtual machine needing space, the most easily as possible. I have find that there is an avaiable sata cable with its electric power, so may I just add the disk plugging these and using the empty 5"1/4 slot available under the CD drive (with a 5"1/4 - 3"1/2 bay adaptater) ? (even if this way it seems that i bypass the raid controller that own the front bay with racks)) that way i think could be easier than adding the disk to the already defined Raid (btw i am also not sure on how to do these but i would not risk to mess the already working things) what are the other operations that i would have to do to ? (sorry I am a real beginner on Vmware EXSI and PowerEdge management :/ i have seen that there is some management from Bios (CTRL+R as start up) so that the disk will be seen or initialize it. I am really not sure of the steps needed...) thank you, best.

  Read the article

• Installing Windows 7 from a USB Hard Drive.

  - by Mark Tomlin

  I have a Western Digital Passport External Hard Drive (320GB) that I want to partition to keep the data on, but use some of the free space to install Windows 7 onto my desktop computer. Microsoft has given me the Windows 7 Enterprise Edition ISO to download. I would like to take the External HD and partition it so I can fit the ISO image onto it. How would I go about doing this? Trying to use GParted to partition the external hard drive has caused a chicken or the egg problem. GParted can't see the drive unless it's mounted, and when it is mounted it will not allow me to do anything to the partition. When it's not mounted, GParted can't see the drive at all and as such can't do anything to the drive. Once the drive is correctly partition, how do I go about moving the ISO image Microsoft gave me to my USB External Hard Drive? Are there any special steps that I need to take? I am using Ubuntu 11.04 & GParted 0.7.0, on my Chromebook to do this. Any support would be appreciated.

  Read the article

• Windows/IIS Hosting :: How much is too much?

  - by bsisupport

  I have 4 Windows 2003 servers running IIS 6. These servers host a bunch of unique web sites (in that they are all different in build/architecture/etc). The code behind these sites range from straight HTML, classic ASP, and 1.1/2.0/3.x flavors of .NET. Some (most) of the sites use a SQL backend, which is hosted on one or two different servers – not the IIS servers themselves. No virtualization on these servers and no load balancing for these particular sites. The problem I’m running into is coming up with some baseline metrics to determine, or basically come up with a “baseline score” to know when a web server has reached its hosting limit. Today, some basic information about each server is used: how much bandwidth does the server pump out, hard drive space availability, and basic (very basic) RAM & CPU utilization (what it looks like at peak traffic times.) I would be grateful if those of you that are 1000x smarter than I am could indulge me with your methods of managing IIS environments. Whether performance monitoring specifics, “score” determination as I’m trying to determine, or the obvious combination of both. Thanks in advance.

  Read the article

• Why is windows not able to create a system partition?

  - by hughes

  I'm reinstalling Windows 7 64 bit, and I encountered an issue I've never seen before. I have a legit copy of Win 64 Professional, and I've installed it probably a half dozen times on this machine in the past without a problem. Googling the error only brings me to issues with people who are upgrading to win7. The drive itself seems to not have a problem. I can mount it on other systems and I can create an NTFS partition on it on other machines. I can install Ubuntu on it without any issues. Additionally, if I try using my alternate backup hard drive, the installer gives the same error. I have run diskpart from the setup page and clean seems to report that all is well. However, I cannot get past the screen below, which says Setup was unable to create a new system partition or locate an existing system partition. This happens regardless of whether or not the disk space is already allocated. What is causing this? How do I solve or get past this?

  Read the article

• How can I upgradge from Ubuntu Intrepid Ibex 8.10 to Jaunty 9.04 when old-releases no longer has the necessary packages?

  - by tommy chheng

  I changed my sources.list to: deb http://old-releases.ubuntu.com/ubuntu/ intrepid main restricted universe multiverse deb http://old-releases.ubuntu.com/ubuntu/ intrepid-updates main restricted universe multiverse deb http://old-releases.ubuntu.com/ubuntu/ intrepid-security main restricted universe multiverse I tried installing sudo apt-get install update-manager-core but i get this error: 1 upgraded, 3 newly installed, 0 to remove and 40 not upgraded. Need to get 2506kB/2555kB of archives. After this operation, 4346kB of additional disk space will be used. Do you want to continue [Y/n]? Y Err http://old-releases.ubuntu.com intrepid-updates/main update-manager-core 1:0.93.34 404 Not Found Err http://old-releases.ubuntu.com intrepid-security/main dpkg 1.14.20ubuntu6.3 404 Not Found Failed to fetch http://old-releases.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_1.14.20ubuntu6.3_amd64.deb 404 Not Found Failed to fetch http://old-releases.ubuntu.com/ubuntu/pool/main/u/update-manager/update-manager-core_0.93.34_amd64.deb 404 Not Found E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Running apt-get update or --fix-missing returns the same errors. How can I successfully upgrade from Intrepid Ibex to Jaunty 9.04?

  Read the article

• Sending mails via Mutt and Gmail: Duplicates

  - by Chris

  I'm trying to setup mutt wiht gmail for the first time. It seems to work pretty well, however when I send a mail from Mutt i appears twice in Gmail's sent folder. (I assume it's also sent twice - I'm trying to validate that) My configuration (Stripped of coloring): # A basic .muttrc for use with Gmail # Change the following six lines to match your Gmail account details set imap_user = "XX" set smtp_url = "[email protected]@smtp.gmail.com:587/" set from = "XX" set realname = "XX" # Change the following line to a different editor you prefer. set editor = "vim" # Basic config, you can leave this as is set folder = "imaps://imap.gmail.com:993" set spoolfile = "+INBOX" set imap_check_subscribed set hostname = gmail.com set mail_check = 120 set timeout = 300 set imap_keepalive = 300 set postponed = "+[Gmail]/Drafts" set record = "+[Gmail]/Sent Mail" set header_cache=~/.mutt/cache/headers set message_cachedir=~/.mutt/cache/bodies set certificate_file=~/.mutt/certificates set move = no set include set sort = 'threads' set sort_aux = 'reverse-last-date-received' set auto_tag = yes hdr_order Date From To Cc auto_view text/html bind editor <Tab> complete-query bind editor ^T complete bind editor <space> noop # Gmail-style keyboard shortcuts macro index,pager y "<enter-command>unset trash\n <delete-message>" "Gmail archive message" macro index,pager d "<enter-command>set trash=\"imaps://imap.googlemail.com/[Gmail]/Bin\"\n <delete-message>" "Gmail delete message" macro index,pager gl "<change-folder>" macro index,pager gi "<change-folder>=INBOX<enter>" "Go to inbox" macro index,pager ga "<change-folder>=[Gmail]/All Mail<enter>" "Go to all mail" macro index,pager gs "<change-folder>=[Gmail]/Starred<enter>" "Go to starred messages" macro index,pager gd "<change-folder>=[Gmail]/Drafts<enter>" "Go to drafts" macro index,pager gt "<change-folder>=[Gmail]/Sent Mail<enter>" "Go to sent mail" #Don't prompt on exit set quit=yes ## ================= #Color definitions ## ================= set pgp_autosign

  Read the article

• Help trying to figure out why IIS7 is crashing / locking up / denying connections

  - by Pure.Krome

  Hi folks, I've got a pretty busy website that is running on a single web front end machine, on W2K8 + IIS7. Every now and then - eg. maybe monday at 3am or something, then a few days later .. some early morning time .. then nothing for 2 weeks ... etc - the website fails to respond to any client connections. ie. no one can connect to the website. I can remote desktop to the machine, etc no probs. I restart the app pool (the website is running in intergrated mode), still nothing. I try and get a crash dump of the process (it's around 600 mb maybe even more) ... that fails after about a min of trying (and i have plenty of HD space). The only way to fix this issue, is to manually stop the www service and then start it again. The stopping takes a while (a minute?) while starting is nearly instant. I'm at a loss to figure out what part of my code is causing this. At first, I thought it might be a stack overflow because of some error that might be going to the error page, which in turn errors .. rinse repeat boom. But i've had a look at the error page and it feels ok. So, I'm hoping someone might be able to help and say how I can correctly get a proper dump of the IIS process so i can then do some more autopsy on it. I would email Tess Ferrandez (the goddess of crash debuging) but I thought I'd try here before I spam her. Can anyone have any suggestions to how I can figure out how to start to debug this issue?

  Read the article

• How to migrate Outlook Express mail rules?

  - by ronwest

  I have a home computer that only had a 15Gb C: drive, and ran out of space with all the Microsoft Updates, etc, that keep coming down. So I fitted a 160Gb drive as a C: drive and altered the drive jumpers to make the old C: drive into a slave D: drive, to save migrating documents, etc. I've installed a clean copy of Windows XP SP3 and reassigned the new Outlook Express' mailstore path to point to the old mailstore folder that now has a D: drive letter - and it all works OK. However, my extensive list of mail rules have not been transferred to the new OE and I have not been able to identify how they are stored. To find it I added a new rule to the new OE, exited OE, then searched on the whole computer (including hidden/system files) for files altered around the time I added the rule. I hoped I could just overwrite a new empty file with an old one. But the only files that seem to be changed are Windows system-level files and some bits and pieces in the Windows\PreFetch sub-folder. None of them can be opened as XP has them locked, and none of them have names that are anything to do with email or rules. Does anyone know of any way of migrating OE rules, or do I have to re-enter them by hand? Thanks!

  Read the article

• How can I add a second hard drive to a previously configured UEFI/ACHI Windows 8 machine?

  - by pflyer

  Recently purchased a new Windows 8 PC. It came with one hard drive. I want to a second hard drive to it. This second hard drive is my data hard drive from my previous computer. However, I have run into issues when the system accesses it. The drive is found in the BIOS. But is not seen by Explorer or Disk Management. I have added the drive to the next available SATA slot: SATA 2. The machine is a UEFI/ACHI based machine. In my reading I have found people documenting the following: 1) adding multiple partitioned hard drives (like mine is) to UEFI based machines is not possible 2) I have seen it suggested that you can only add blank hard drives to UEFI based machines. However, in doing so, I did not have success. I tried to add it as a hard drive with unallocated space and then as a hard drive with a single simple partition. Both attempts failed. My ultimate question: What is the proper procedure for adding a second hard drive to a UEFI/ACHI machine? I do not want to reinstall the OS and start from scratch as I have seen suggested elsewhere. There has to be a way to accomplish this without all that hassle. Thanks in advance for your help.

  Read the article

• How can I avoid my web browser from redirecting to localhost using WAMP in Windows7?

  - by Josh

  I'm currently using Windows 7 with WAMP to try and work on some software, but my web browsers will not accept cookies from the "localhost" domain. I tried creating a few bogus domains in my hosts file by pointing them to 127.0.0.1 but when I type them in I am automatically redirected back to localhost. I have also configured virtualhosts in apache to correspond with the domains I added to the hosts file and it still redirects back to localhost. Is there anything special I must do on Windows 7 to get around this localhost redirect? Thanks for looking :) I'll include my host file here: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost 127.0.0.1 magento.localhost.com www.localhost.com Thanks for looking :)

  Read the article

• How do I permanently delete /var/log/lastlog?

  - by GregB

  My /var/log/lastlog file is huge. I know it's really only a few kilobytes, but tar isn't smart enough to know that, so when I image a virtual machine, my restore fails because it thinks I'm trying to load more data than I have capacity on my disk. I want to delete /var/log/lastlog and stop any and all logging to the file. I'm aware of the security implications. This logging needs to stop to preserve my backup strategy. I've made a change to /etc/pam.d/login which I was told would disable logging to /var/log/lastlog, but it does not appear to work as /var/log/lastlog keeps growing. # Prints the last login info upon succesful login # (Replaces the `LASTLOG_ENAB' option from login.defs) #session optional pam_lastlog.so Any ideas? EDIT For anyone interested, I use Centrify Express to authenticate my users via LDAP. Centrify Express is "free", but one of the drawbacks is that I can't manage user UIDs via LDAP, so they are given a dynamic UID when they login to a server. Centrify picks some crazy high UID values (so they don't conflict with local users on the server, presumably). /var/log/lastlog is indexed by UID, and grows to accommodate the largest UID on the system. This means that when a Centrify user logs in, they get a UID in the upper-end of the UID range, which causes lastlog to allocate an obscene amount of space, according to the file system. ~$ ll /var/log/lastlog -rw-rw-r-- 1 root root 291487675780 Apr 10 16:37 /var/log/lastlog ~$ du -h /var/log/lastlog 20K /var/log/lastlog More Into --- Sparse Files

  Read the article

• Linux security: The dangers of executing malignant code as a standard user

  - by AndreasT

  Slipping some (non-root) user a piece of malignant code that he or she executes might be considered as one of the highest security breaches possible. (The only higher I can see is actually accessing the root user) What can an attacker effectively do when he/she gets a standard, (let's say a normal Ubuntu user) to execute code? Where would an attacker go from there? What would that piece of code do? Let's say that the user is not stupid enough to be lured into entering the root/sudo password into a form/program she doesn't know. Only software from trusted sources is installed. The way I see it there is not really much one could do, is there? Addition: I partially ask this because I am thinking of granting some people shell (non-root) access to my server. They should be able to have normal access to programs. I want them to be able to compile programs with gcc. So there will definitely be arbitrary code run in user-space...

  Read the article

• Windows 7 Paging file apparently not being used

  - by Daniel F.

  I'm running Windows 7 Home Premium 32bit on a mobo with 24GB RAM. Of those 24GB, 20GB are assigned as a RAMDISK via ASRock XFastRAM. This RAMDISK has the drive letter X assigned to it. On X:\ I'm storing the temporary files folder, as well as pagefile.sys. Pagefile.sys has 6GB of size. The X:\ has usually around 14GB free space, so the temporary files are negligible, it's mostly the browsers which are storing their caches on there. Now my issue is that Firefox is crashing a lot on me, no error message pops up, but I know that this is because it's out of memory. I could kind of live with that, but now that I switched from using Eclipse to Android Studio, I know that I'm in trouble, because Java isn't capable of allocating, and Android Studio, together with the Java instances it launches, is quite a memory hog. So I tried to figure out what's wrong, and apparently Windows isn't swapping out memory onto the paging file. While my applications are crashing (firefox) / not starting (java vm's), the paging file is only using constantly around 15% of its size (checked with the performance monitor). 15% equals to 1GB aprox. I know that the correct solution would be to switch to 64 bit Windows, but I had to use the 32 bit version because of driver issues which I had about two years ago, and I guess that I'll have them again if I reformat and install the 64 bit version. Also, the machine is running quite stable, the only issue is the memory, so I'd like to use it as it is (as the apps are installed and configured) Is there a way to make Windows use the paging file more efficiently? None of my processes require more than 1GB, I'd just like it to swap out some seldomly used stuff, like GoogleCrashHandler.exe and stuff like that in order to have "more physical memory avaliable". Is that possible?

  Read the article

• KVM and libvirt: How to configure a new disc device to an existing VM?

  - by initall

  I've got an Ubuntu 9.04 server running two VM's. In /etc/libvirt/qemu/machine1.xml two disk devices are defined like this: <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <source file='/vserver/machine1/disk0.qcow2'/> <target dev='hda' bus='ide'/> </disk> <disk type='file' device='disk'> <source file='/vserver/machine1/disk1.qcow2'/> <target dev='hdb' bus='ide'/> </disk> I need more storage space in at least one of the devices and thought about adding a third hdc device by simply adding one with same style as above and re-organising my mount structure (The virtual sizes of the current qcow2 files are unfortunately limited.) My problem is that reloading libvirtd and restarting the VM do not result in a new visible device (checked with fdisk). I'm aware of extending an existing qcow2 file (converting to raw format, cat-ing/adding the new one, using smth. like gparted) - but only as a last resort. Hopefully it's something very simple I'm missing?

  Read the article

• Network switches for LAN party

  - by guywhoneedsahand

  I am working on setting up the network for a small LAN party (less than 16 people). Most of them do not have wireless cards in their rigs, so I need to set up some way for everyone to a) play LAN games and b) access the internet. The LAN party will probably take place in my basement, where I have enough space. However, the basement is not wired up with the router which is actually on the floor above. I make a cantenna a while back that can boost the wireless performance of my computer significantly. How can I use this to provide internet and LAN to guests? My hope was that I could use a switch like this http://www.newegg.com/Product/Product.aspx?Item=N82E16833181166 for the LAN - but how can I give people access to the internet? Is there such thing as a network extender / 16-port switch? Obviously, the internet performance doesn't need to be super stellar, because the games will be using LAN - so I am looking to provide some usable internet for web browsing, and very high speed LAN for games. Thanks!

  Read the article

• Juniper SSG20 IP settings for email server

  - by codemonkie

  We have 5 usable external static IP addresses leased by our ISP: .49 to .53, where .49 is assigned to the Juniper SSG20 firewall and NATed for 172.16.10.0/24 .50 is assigned to a windows box for web server and domain controller .51 is assigned to another windows box with exchange server (domain: mycompany1.com) mx record is pointing to 20x.xx.xxx.51 Currently there is a policy set for all SMTP incoming traffic addressed to .51 forward to the NATed address of the exchange server box (private IP: 172.16.10.194). We can send and receive emails for both internal and external, but the gmail is saying mails from mycomany1.com is not sent from the same IP as the mx lookup however is from 20x.xx.xxx.49: Received-SPF: neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) client-ip=20x.xx.xxx.49; Authentication-Results: mx.google.com; spf=neutral (google.com: 20x.xx.xxx.49 is neither permitted nor denied by best guess record for domain of [email protected]) [email protected] and the mx record in global dns space as well as in the domain controller .50 for mail.mycompany1.com is set to 20x.xx.xxx.51 My attempt to resolve the above issue is to Update the mx record from 20x.xx.xxx.51 to 20x.xx.xxx.49 Create a new VIP for SMTP traffic addressed to 20x.xx.xxx.49 to forward to 172.16.10.194 After my changes incoming email stopped working, I believe it has something to do with the Juniper setting that SMTP addressed to .49 is not forwarded to 172.16.10.194 Also, I have been wondering is it mandatory to assign an external static IP address to the Juniper firewall? Any helps appreciated. TIA

  Read the article

• how do I fix a wrong UUID in grub.cfg?

  - by mozerella

  I run Debian Wheezy alone on my PC and I recently copied the root partition to another with rsync as I found that worked well (I also know about dd and ddrescue but they leave unusable space on the new partition). I generated a new random UUID for the new partition with sudo tune2fs -U random /dev/hda9 and also updated fstab / and /home entries. Then as I know so little about GRUB I used a gui (GRUB Customizer) to probe for the new OS and add an entry to GRUB and the MBR -it makes an /etc/grub.d entry then updates GRUB. On startup, the GRUB list contains the new OS (on sda9) but it boots the first OS (which I copied from -sda5). /boot/grub/grub.cfg contains the new debian OS but it looks like this set root='(hd0,msdos9)' search --no-floppy --fs-uuid --set=root 64662470-0e58-4dfd-90ac-43227d773556 linux /boot/vmlinuz-3.2.0-2-amd64 root=UUID=cc3bca0d-aee4-4b9c-95c2-57212cc36d4d ro quiet initrd /boot/initrd.img-3.2.0-2-amd64 the 1st uuid is of sda9, but the 2nd uuid there is of sda5. I can change the 2nd uuid at startup (with E) and it boots sda9. So how can I get grub.cfg corrected so that the sda9 GRUB list entry boots from sda9 permanently?

  Read the article

• Parking domains and avoiding so called "search engine penalities"

  - by senthilkumar-c

  I have purchased two domains from one particular registrar and hosting from GoDaddy. Assume they are domain1.com and domain2.com Assume my hosting IP address is 111.111.111.111 I added both domain1.com and domain2.com in my domain management control panel and gave the same two nameservers for both domains at my registrar's control panel. So, now, both domains should show the same website. When I ping "domain1.com" or "domain2.com" the results say - Pinging domain1.com [111.111.111.111] with 32 bytes of data: Pinging domain2.com [111.111.111.111] with 32 bytes of data: respectively. So, they both point to the same hosting IP. BUT, internally, I have configured IIS to point them to different folders so that different websites are shown. (My hosting plan is expensive and I intend to use the space and bandwidth for many websites). But still, technically, all domains point to same IP address. Is this a bad thing? Is this what is called "domain parking"? I read some search engine forum posts that two domains pointing to the same IP/Website will be penalised by search engines and stuff. I have also read that simply "parking" the domains won't attract penality. I don't know whether what I have done is parking or the so called "wrong" thing. Can someone shed light on what I have done and what I should do? I don't want to be blacklisted by any search engine. P.S. I know this is not a search engine forum, but I am new to website hosting and domains and I am very weak in nearly all technical terms and concepts relating to web hosting and domains. I thought this will be a good place to understand these things.

  Read the article

• Windows XP Disappearing Folders

  - by XenoFoxx

  I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

  Read the article

• Is there a limit to how many sites can be hosted on a single IP address when using HTTP Host Headers on Windows 2008?

  - by Kev

  For reasons that are lost in the mists of time, our older Windows (2000, 2003) servers have been configured with a "Administrative" IP address and three further "Hosting" IP addresses. There are also additional IP's for sites with SSL certificates. The "Administrative" IP address is where all our internal provisioning, monitoring and other such apps are bound to. We lock this down and don't permit access to it from the outside world (other than over our VPN). The three "Hosting" IP addresses are used for IIS website hosting (in conjunction with host headers). Historically, new site IP address allocations have been rotated through these three IP addresses. I'm not really sure why. I'm building a new batch of servers and I'm considering just having a single hosting IP address. Our servers can host up to 1200 sites on a single machine. Is there a technical limit to the number of IIS sites that can bind to a single IP address? Our Linux platform seems to do just fine with just a single shared IP + host headers. I initially thought this might be an SEO thing, but given that IPv4 address space conservation is paramount I hardly think Google or other search engines could reasonably penalise site rankings just because hundreds of sites hang off the same IP.

  Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >