Search Results

Search found 11994 results on 480 pages for 'mixed mode'.

Page 295/480 | < Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >

• Should I bother upgrading my Opteron 270 Server?

  - by MousePad

  I have an Opteron Server machine (in a large workstation class case) running on the Tyan 2895 motherboard. It's a dual CPU socket board, but I only have one 270 in there. I have 4GB of RAM, but less than 3GB is addressable, even in 64bit mode, due to the way the board is designed. Is it worth spending a few hundred on an additional CPU and maybe some more RAM? The other problem is that one of the two SATA ports on the board had its wire socket break off. So only one drive can be run as of now. I could have it repaired, but at what cost? Add in the fact that the power supply is gunked up with dust and it's a bit of a nightmare. I actually work about it getting too hot. Seems that for the money I could buy a new server rack from Dell, but it also seems a shame to waste an otherwise working, and for my needs still very fast machine.

  Read the article

• Flash Player is creating thousands of .tmp files

  - by Ed Manet

  We have seen a number of machines in our environment (XP Pro SP3) that have been running out of disk space because of .TMP files in the windows\temp folder. One machine had 6GB of .TMP files on it starting from around August 2010. The files are all 305kb in size and they seem to get created every 10 minutes. The files appear to be either .EXEs or .DLLs when opened in a hex editor. The words "this program can not be run in DOS mode" are at the beginning of the file and the words "Adobe Flash Player" are scattered all over the end of the file (probably the string table). While it's easy enough to clean them up, I'd like to find root cause for the issue. Has anybody else seen this?

  Read the article

• Can't delete file from windows 7

  - by r.s.mahanti

  I downloaded a torrent file from internet. The problem is it's size is showing 0 bytes. I tried to scan it with antivirus, upload it to virus total, delete it but it's showing the file is not found. I tried to delete it in safe mode also but no success. Can anybody explain me, what can be reason for this and what is the way to delete this file? Thanks in advance. My operating system is windows 7. EDIT : the name of the file is "[Torrentreactor.to] - Site Translator 4.06.torrent."

  Read the article

• Blank screen on laptop after replacement

  - by Mark

  I have an Acer Aspire 5332 laptop, running Windows 7 home premium 32bit. My screen broke, but the particular screen (LED) are no longer made so I bought a CCFL one with a new converter which has proven to be compatible according to the supplier. When I first booted the screen went blank just after the Windows logo was displayed. I suspected a driver issue, so booted in safe mode without any problems, disabled the display adapter (Intel 4 series express family) and it booted up fine. So I guess the screen is not compatible with the display adapter. The driver version is 8.15.10.1892. I tried updating from the Intel site, but it saying it cannot (something to do with manufacturer specific). The supplier is not willing to take it back, so I'm down £60 (UK). I can use it with the adapter disabled, but the quality is bad and I cannnot play video, etc. Any help appreciated.

  Read the article

• IE session (-nomerge) manager

  - by skrco

  I'm looking for an application that can manage (save/open) multiple Internet Explorer instances (to be precise nomerge sessions), host them in single window and arrange these instances e.g. in tabs, so in result you have double tab bar. In functionality it's similar to Remote Desktop Manager, where you can create Web session, but in embedded mode you cannot set the nomerge option. I've been searching the web, but with no results. So I put this question whether anyone know of such application or workaround. Or I have to write my own app.

  Read the article

• How I can make my windows look like mac using any software or utilities?

  - by user33631

  I am currently using Windows classic mode in Win server 2008 r2. Can I get mac like themes in windows. Like When I run Photoshop, SongBird or other apps they have interface quite similar with Mac. Does someone know how it's possible to get a mac like look in windows (compatible to win 7). My simply means that something that make my windows's themes color like mac. Like I can run firefox by using themes but i want now for every apps means the three button on top titlebar and interface.

  Read the article

• choose server backend to some URL with haproxy

  - by shingara

  To some URL I don't want use some server. So use other. Actually I have this haproxy configuration. global daemon log 127.0.0.1 local0 #log loghost local0 info maxconn 4096 #debug #quiet user haproxy group haproxy defaults log global mode http option httplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 balance roundrobin stats enable stats refresh 5s stats auth admin:123abc789xyz # Set up application listeners here. listen application 0.0.0.0:10000 server localhost 127.0.0.1:10100 weight 1 maxconn 5 check server externe 127.0.0.1:10101 weight 1 maxconn 5 check By example I want all url to /users be served only by server localhost, not by externe.

  Read the article

• Nvidia driver on Windows 7 causing black screen

  - by inKit

  I have just installed Windows 7 on a desktop machine and for the first time ever have had a really tough time doing so, its normally a nice smooth install. This time I found that the monitor would simply go black after completing the installation. I tried reinstalling about 3 times and this did not help. After much searching I discovered that it was the nvidia drivers that were playing up with win 7, so i booted into safe mode, disabled the device, then rebooted to complete the installation. Windows 7 now works fine as long as the nvidia 9600 gt video card is disabled. The moment I enable it, the system requires a reboot and the screen will go black before even getting to the log in screen. I have tried downloading the latest driver and installing it manually, I have also tried uninstalling the device and allowing windows 7 to install it itself. Nothing seems to work. any clues?

  Read the article

• Replacing explorer.exe under Windows 7

  - by Whitey

  A bit of an odd request I gather, but for reasons too deep to go into detail here I need to replace my explorer.exe in the C:\Windows directory. I have tried doing it myself, through the GUI and command prompt (ran as administrator) but I get access denied. It seems that being an admin on your machine is not the highest permission level after all, and only Trusted Installer can modify the file. Does anybody know a way that works? I was about to boot into safe mode and try it but wanted to get some feedback before I do anything in-depth. Thanks.

  Read the article

• ASUS WL-500gP v2 network between two local machines

  - by Epsiloncool

  I have two windows XP machines in my home networks, connected with ASUS WL-500gp V2 which also used as internet router. Problem is: while I have both computers normally goes to internet (used DHCP, static routes is ON, routing table is empty, operation mode is Home Gateway). I see both computers listed on the Network Neighborhood on 1st computer (wired to router), can enter to my own computer, but can not enter to other. I see only one computer (2nd) on the Network Neighborhood on 2nd computer (connected thru Wi-Fi), can enter to itself, getting error when trying to enter 1st computer address in address line (like \My1stComp). What is the problem? I totally crazy founding problem about 3 months.

  Read the article

• Deployed Web Application Requests for User Name and Password

  - by user43175

  Deployed Web Application Requests for User Name and Password I recently deployed a .NET web application into the server. Authentication mode is set to Windows (since the application is accessible only to Intranet users. Testing some machines, the application loads up properly. For some machines, a logon dialog window appears asking for User Name or Password. These dialog windows are those that you also normally see when you are trying to log into a Windows domain. Any idea why this happens randomly? Thanks.

  Read the article

• my.ini optimization on Windows 2008 R2 VPS

  - by MKphpDev

  I have a vmware VPS running Windows Server 2008 R2 Enterprise that has performance issues with MySQL. Every few minutes, MySQL stall for few seconds then responed to queries. I'm sure that my.ini need to be optimized, but unfortunately, I don't have any idea of my.ini configuration. What's running on the server: 2 small wordpress blogs, 1 vbulletin forums (approx. 1.2 GB database, and increasing), small database for some sort of plug-ins (no more than 4000 records) Server Info: Processor: Intel Xeon X5550 @ 2.67GHz, RAM: 6 GB (memory useage never exceeded 2 GB), MySQL 5.5, PHP 5.3.10, IIS 7 current my.ini: [mysqld] default-storage-engine=INNODB sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE _USER,NO_ENGINE_SUBSTITUTION" max_connections=250 myisam_max_sort_file_size=20G innodb_additional_mem_pool_size=256M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=8M innodb_buffer_pool_size=512MB innodb_log_file_size=128M innodb_thread_concurrency=10 key_buffer_size = 512M myisam_sort_buffer_size = 8M join_buffer_size = 256K read_buffer_size = 256K sort_buffer_size = 256K table_cache = 4000 thread_cache_size = 200 wait_timeout = 30 connect_timeout = 10 tmp_table_size = 32M max_allowed_packet = 1M max_connect_errors = 10000 query_cache_size = 16M query_cache_limit = 2M query_cache_type = 1 query_cache_min_res_unit = 1024 query_prealloc_size = 16384 query_alloc_block_size = 16384 skip-external-locking read_rnd_buffer_size=1M max_heap_table_size=16M thread_concurrency=8 [mysqld_safe] open_files_limit = 8192 [mysqldump] quick max_allowed_packet = 16M [myisamchk] key_buffer_size = 128M sort_buffer_size = 128M read_buffer = 2M write_buffer = 2M any help with that, please?

  Read the article

• Vista Startup - Cannot Find the File Specified

  - by Redmastif

  Yesterday I restarted my laptop because my Wi-Fi catcher wasn't working correctly, and when the computer reached the login screen, instead of showing my user account it said "Cannot find the file specified". I rebooted and ran the Startup Repair and Memory Diagnostics but nothing showed up. I also took the battery out for a minute and tried again but still no luck. The weird thing is that I cannot even boot into safe mode, it still shows the same error. I don't remember downloading or opening anything suspicious recently, and I have 3 different cleaners/anti-malware programs as well that I usually run about once a week. I did go into the registry recently but I didn't modify or delete anything as I was only checking to see if I had a certain key in it. I have a Dell laptop running Vista Home Basic SP2. If I have to I can reinstall the OS with the CD or even take it to Best Buy but I'd rather try and fix it first. Thanks.

  Read the article

• I lost /dev/md2 on my server

  - by sten

  Hi, My 2 hard drives fried at the same moment apparently. My host company rebooted my server in rescue mode and I am trying to recover my data. They told me to mount /dev/sda2 to recover the data I need but, looking at a similar server that I have in pool, the data I'm looking for should be instead in /dev/md2. I can find /dev/md0 but not /dev/md2 (nor /dev/md1). I've looked on several places on the web and I could only find messages explaining how to create new partition. I just need to recover some data, not all of it and I'll be glad if anyone could help me to mount the /dev/md2 folder (or any other trick that would allow me to recover the data that was stored there). Thanks in advance, Sten

  Read the article

• SSH tunnel doesn't work

  - by s1ck

  I am trying to use my server as a "proxy" with ssh. However, setting up tunneling with ssh -D localhost:8000 user@myserver does not work. I tested this on various machines with ssh and putty - It connects just fine, but when I set my browser settings accordingly, I just get an error "Connection has been reset". I tried monitoring the traffic with wireshark, but I didn't even see some tunnel-traffic. I explicitly set AllowTcpForwarding to "yes" but I still can't use the tunnel. When running ssh in verbose mode, I don't get any errors but debug1: Connection to port 8000 forwarding to socks port 0 requested. debug1: channel 3: new [dynamic-tcpip] debug1: channel 3: free: dynamic-tcpip, nchannels 4 What am I doing wrong?

  Read the article

• Why my USB mouse get suspended after 3 seconds of inactivity?

  - by Vi.

  Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

  Read the article

• How can I fix a computer that is infested with malware and is extremely unresponsive? [closed]

  - by fredley

  Possible Duplicate: How do I get rid of malicious spyware, malware, viruses or rootkits from my PC? I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• Slow speed for UFS mounted drive in Linux

  - by Incredible

  Hi, I have a disk that has Sun OS disk, (ufs filesystem). And I want to mount it in my debain machine with read/write mode. Since by deafult linux doesn't support write to ufs filesystem. I had to recompile the kernel by setting to the flag CONFIG_UFS_FS_WRITE=y. Now I am able to write to the filesystem, but the read/write speed is very slow. It is around 120 KB/s. Any idea what is wrong and how to resolve this issue? Thank you in advance.

  Read the article

• Windows boot manager and two hard disks

  - by Pincopallino

  here's my situation: I had an HDD with Windows 8 installed (UEFI mode). I bought a SSD and wanted to do a clean install of Windows, so I thought that disabling the HDD and leaving the SSD as the only drive when installing was the right procedure to install the boot manager on the SSD. Unfortunately, after I plugged the HDD back in, the computer won't boot unless I select from the BIOS directly the SSD as the boot device. I guess the problem is that I have two Windows Boot Managers on two separate drives and they conflict. How would I solve this problem (excluding a format of the HDD, because I need to access data on the old Windows partition and, ideally, I would like to be able to boot that partition)?

  Read the article

• Lenovo N100 and Samsung SSD 830, shouldn't this go faster than 100MB/s?

  - by Jook

  I recently upgrated my Lenovo N100 0768 with a Samsung SSD 830 - specified to support 520 MB/s read and 320MB/s write. However, having only SATA1 with max. of 150MB/s speed, it has to run in a slower mode - of course. But, shouldn't it be more on the edge of this limit than ranging between 90-115MB/s and averaging around 103MB/s? Or is this really as much as I can expect? Tested with HD-Tach. Has anyone comparable results on a SATA1 controller with a SSD drive faster than SATA1? Preferably similar to the Samsung 830?

  Read the article

• Windows/global setting to allow only SSL when on public Wifi?

  - by hungry

  Rather than going through each of my apps and modifying settings, or tweaking individual browser settings (I use three different browsers) or just being careful not to type non-SSL URLs into the web address bar, is there a solution at the Windows level that will prevent anything from connecting to the web from my laptop unless it's using SSL? I also have mini apps installed like Gmail checker, etc that connect to the web of their own volition using my usernames, passwords and such, so it goes beyond just web browsers. The reason I'm asking is I want to work securely on the general Internet when on public Wifi (e.g. coffee shops) without a lot of hassle or having to remember everything that needs to be locked down. When I'm back home I want to go back to full access mode using any kind of protocol on the web. If a website doesn't support SSL when I'm out in public then I just don't surf it - that's not a worry to me.

  Read the article

• How to extend a file definition from an existing module in the node?

  - by c33s

  I use an older version of the example42 mysql module, which defines the mysql.conf file but not its content. Mmy goal is to just include the mysql module and add a content definition in the node. class mysql { ... file { "mysql.conf": path => "${mysql::params::configfile}", mode => "${mysql::params::configfile_mode}", owner => "${mysql::params::configfile_owner}", group => "${mysql::params::configfile_group}", ensure => present, require => Package["mysql"], notify => Service["mysql"], } ... } node xyz { include mysql File["mysql.conf"] { content => template("mymodule/mysql.conf.erb")} } The above code produces a "Only subclasses can override parameters" What is the correct way to just add a content definition to an existing file definition?

  Read the article

• Why does MS-DOS tells me I need extended memory and thinks a file is read-only? [closed]

  - by Jake Inc.

  I am running a .COM file on a MS-DOS 6.22 boot USB drive When I run it on my laptop the program works fine but when I run it on my desktop I get error 40 not enough extended memory. When I go to the memory tab in GUI I try to switch none to auto, but I get the error "This file might be read-only". It's not read-only, when I put it on my desktop I change the settings and the new settings are in a .pif I can't run .pif in MS-DOs so I need to Change the .exe not create a .pif. Change the amount of extended memory all files have on my MS-DOS. On my laptop there is no memory tab, the only real difference is my laptop is x64. Thanks for helping but I think teh x64 bit has nothing to do with it I dont eve nthink iits in 64 bit mode because Im using a boot USB. What i need to is listed above, thanks for helping.

  Read the article

• Why might one hard disk perform slower than another?

  - by Styne666

  I have just bought two WD 3TB Reds (WD30EFRX) for a FreeNAS box and whilst doing burn-in testing it seems like one is consistently taking about 10% longer than the other. So far I've done: a dd read test of the whole device, a long SMART test and it's currently halfway through a badblocks -wvs. The second device is lagging behind the first on all of them. I'm running these commands on Debian stable in two Konsole tabs. Is there a reason this could be considered normal behaviour or is it worth running the tests independantly? They're both plugged in to the LSI 2308 (IT mode) on a Supermicro X10SL7-F.

  Read the article

• Restarting nginx backends without losing requests

  - by Oli

  I'm sure it's been asked before in different words but I run several Django sites via uwsgi (emporer mode) behind nginx. It's all a fairly standard configuration but I find that if I restart the central uwsgi process, nginx just bombs out 502s rather than waiting for the socket to become available. I recognise that most of this is probably for a reason but people seeing 502 errors really stings me. It's certainly not something I want a client to see. So... Can I beg nginx to wait/retry backends? Or, Is there anything (other than the obvious) I can do to minimise commercial damage from uwsgi restarts?

  Read the article

< Previous Page | 291 292 293 294 295 296 297 298 299 300 301 302  | Next Page >