Search Results

Search found 16355 results on 655 pages for 'lua c connection'.

Page 296/655 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

  • Can't get DNS Alias work on Ubuntu 10.04 with Apache 2

    - by Johnny
    I want to use the DNS Alias to configure one of my domain pointing to a specific directory on the server. Here is what I've done: Change the IP address in domain setting, and it works $ ping www.example.com PING example.com (124.205.62.xxx): 56 data bytes 64 bytes from 124.205.62.xxx: icmp_seq=0 ttl=48 time=53.088 ms 64 bytes from 124.205.62.xxx: icmp_seq=1 ttl=48 time=52.125 ms ^C --- example.com ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 52.125/52.606/53.088/0.482 ms Add sites-available and sites-enabled $ ls -l /etc/apache2/sites-available/ total 16 -rw-r--r-- 1 root root 948 2010-04-14 03:27 default -rw-r--r-- 1 root root 7467 2010-04-14 03:27 default-ssl -rw-r--r-- 1 root root 365 2010-06-09 18:27 example.com $ ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 26 2010-06-09 15:46 000-default -> ../sites-available/default lrwxrwxrwx 1 root root 33 2010-06-09 18:17 001-example.com -> ../sites-available/example.com But it doesn't work and when I open the browser for www.example.com, it shows an 111 error: The following error was encountered: Connection to 124.205.62.48 Failed The system returned: (111) Connection refused Here is how example.com's config: $ cat /etc/apache2/sites-enabled/001-example.com <virtualhost *:80> DocumentRoot "/vhosts/example.com/htdocs/" ServerName www.example.com ServerAlias example.com <Location /> Order Deny,Allow Deny from None Allow from all </Location> #Include /etc/phpmyadmin/apache.conf ErrorLog /vhosts/example.com/logs/error.log CustomLog /vhosts/example.com/logs/access.log combined Could you please tell me how to solve this?

    Read the article

  • Routing / binding 128 IPs to one server

    - by Andrew
    I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Update: I removed the gateway and now it works. I can reach the website thru all 128 ip's. But when I try to bind a socket connection in php to a specific ip I get no answer. socket_bind($sock, "xx.xxx.xx.xxx"); socket_connect($sock, 'google.com', 80); I tryed to use a sniffer to see the packets, and I see the packet sent from binded ip to google.com but the "connection" can't be established. I don't know anything about "route" command, but I have a feeling that this is the solution.

    Read the article

  • Network structure --> Server 2k8r2 <--> Livebox <--> Router <--> Other PCs

    - by Yusuf
    I have a Livebox connection to the Internet and I have set up my network as follows: - Livebox <--> Win2k8R2 Server - Livebox <--> Netgear N150 Router - Router <--> Other PCs Therefore, in my LAN, - the Livebox has IP address 192.168.1.1, - the Router 192.168.1.12 (when accessed from the Livebox or the server), - the Router 10.0.0.1 (when accessed from the PCs connected to the Router), - the server 192.168.1.2, - the PCs 10.0.0.x I was using a previous configuration, which was as follows: - Livebox <--> Netgear N150 Router - Router <--> Win2k8R2 Server - Router <--> Other PCs Everything was simple, and I just had to forward all ports for incoming connection on the Livebox to the Router, and then forward the specific ports to the Server as needed (it must be however noted that any server I use is found on the Win2k8R2 server itself). In this previous configuration, the IP addresses were as follows: - Livebox 192.168.1.1 - Router 192.168.1.12 (when seen from Livebox) - Router 10.0.0.1 (when seen from server & PCs connected to it) - Server 10.0.0.2 - PCs 10.0.0.x So now of course, my port-forwarding does not work anymore since the server is not connected (directly) to the Router. What I would like to know is how do I configure the Livebox and Router to still have the features like before? From what I understand of networks (which is very limited, btw), I see these options: Make the router assign IPs like 192.168.1.x (but then I want the forwarding to be done from the router itself, is it possible?) The forwarding on the router to the server uses IP address 10.0.0.2. I could change it to 192.168.1.2 (Is that even possible, does it work?) Forward all ports from the Livebox itself to the server, and then manage them there (Is software-based port-forwarding as secure as hardware-based?)

    Read the article

  • Find slow network nodes between two data centers

    - by 2called-chaos
    I've got a problem with syncing big amount of data between two data centers. Both machines have got a gigabit connection and are not fully occupied but the fastest that I am able to get is something between 6 and 10 Mbit = not acceptable! Yesterday I made some traceroute which indicates huge load on a LEVEL3 router but the problem exists for weeks now and the high response time is gone (20ms instead of 300ms). How can I trace this to find the actual slow node? Thought about a traceroute with bigger packages but will this work? In addition this problem might not be related to one of our servers as there are much higher transmission rates to other servers or clients. Actually office = server is faster than server <= server! Any idea is appreciated ;) Update We actually use rsync over ssh to copy the files. As encryption tends to have more bottlenecks I tried a HTTP request but unfortunately it is just as slow. We have a SLA with one of the data centers. They said they already tried to change the routing because they say this is related to a cheap network where the traffic gets routed through. It is true that it will route through a "cheapnet" but only the other way around. Our direction goes through LEVEL3 and the other way goes through lambdanet (which they said is not a good network). If I got it right (I'm a network intermediate) they simulated a longer path to force routing through LEVEL3 and they announce LEVEL3 in the AS path. I basically want to know if they're right or they're just trying to abdicate their responsibility. The thing is that the problem exists in both directions (while different routes), so I think it is in the responsibility of our hoster. And honestly, I don't believe that there is a DC2DC connection which only can handle 600kb/s - 1,5 MB/s for weeks! The question is how to detect WHERE this bottleneck is

    Read the article

  • Server 2003 and XP Client; Why are HTTP connections being silently dropped.

    - by Asa Yeamans
    On my network, my edge-router, a windows 2003 r2 server router with all the latest updates, will drop packets, but only under specific circumstances. I have troubleshot and isolated it down to the most simple configuration i can. There is NO NAT involved. Only fully-public IP addresses. No Firewalls are running either, all ahve been disabled. no packet filters on any interfaces anywhere either. I have a single Windows XP virtual machine and my edge-router(the windows 2003 r2 server, and also a virtual machine) running on a windows 2008 x64 r2 system (running virtual server 2005 as i dont have Intel-VT compatible chip yet). The edge router can access any external http site just fine, no issues. However the windows XP machine is only able to access certain sites. These work: www.google.com www.txstate.edu www.workintexas.com www.thedailywtf.com . These Dont: www.yahoo.com www.utexas.edu en.wikipedia.org slashdot.org www.bing.com. I have removed all possibility of DNS issues by connecting with net-cat from the XP box and sending GET /\r\nHost: \r\n\r\n and that connection replicates the issue as well. The network setup: My statically assigned IP block: x.x.x.168/29 DSL Modem -----PPPoE Connection---- x.x.x.169[EdgeRouter] [EdgeRouter]x.x.x.170 -----Virtual Ethernet----- x.x.x.174 [Test2] Test2's Default gateway is x.x.x.170 and test2 can ping any and every valid, accessible, public IP address with no packet loss what-so-ever. If i connect directly over PPPoE from test2 (the XP box) everything works just fine... Im at my wits end, i have NO IDEA whats causing this.

    Read the article

  • Strange ssh key issue

    - by user55714
    Scenario 1. I am doing this from /home/deploy directory I am trying to set up ssh with github for capistrano deployment. this has been an absolute nightmare. when I do ssh [email protected] as the deploy account I get Permission denied (publickey). so may be the key is not being found, so If I do a ssh-add /home/deploy/.ssh/id_rsa Could not open a connection to your authentication agent. (i did verify that the ssh-agent was running) If I do exec ssh-agent bash and then repeat the ssh-add then the key does get added and I can ssh into github. Now I exit from the ssh connection to my server and ssh back in and I can't ssh into github anymore! Scenario 2 if I login to my remote server and then cd into my .ssh directory and ssh into github then it all works fine I guess there is a problem with locating the key and for some reason the agent isn't funcitoning correctly. Any ideas? Her is a pastie with more details..my .bashrc, permissions etc. http://pastie.org/pastes/1190557/

    Read the article

  • Juniper router dropping pings to external interface

    - by Alexander Garden
    My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

    Read the article

  • How is route automatic metric calculated on Windows 7?

    - by e-t172
    KB299540 explains how Windows XP automatically assign metrics to IP routes: The following table outlines the criteria that is used to assign metrics for routes that are bound to network interfaces of various speeds. Greater than 200 Mb: 10 Greater than 20 Mb, and less than or equal to 200 Mb: 20 Greater than 4 Mb, and less than or equal to 20 Mb: 30 Greater than 500 kilobits (Kb), and less than or equal to 4 Mb: 40 Less than or equal to 500 Kb: 50 However, they seem to have changed their algorithm in Windows 7, as my routing table looks like this: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.3 10 0.0.0.0 0.0.0.0 10.202.254.254 10.202.1.2 286 10.202.0.0 255.255.0.0 On-link 10.202.1.2 286 10.202.1.2 255.255.255.255 On-link 10.202.1.2 286 10.202.255.255 255.255.255.255 On-link 10.202.1.2 286 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.3 266 192.168.0.3 255.255.255.255 On-link 192.168.0.3 266 192.168.0.255 255.255.255.255 On-link 192.168.0.3 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.3 266 224.0.0.0 240.0.0.0 On-link 10.202.1.2 286 255.255.255.255 255.255.255.255 On-link 10.202.1.2 40 =========================================================================== The only "correct" metric is the first one (Gigabit connection = 10). However, other routes using the Gigabit connection have metric = 266, my VPN has metric = 286, and loopback is 306 (?!). Any idea what's going on?

    Read the article

  • Problem connecting to remote network using demand-dial VPN interface with Windows Server 2003

    - by Mike Forman
    I have a Windows 2003 server (SP2) that I'm trying to set up route traffic from my local network using a VPN My local network has the following components: Broadband router (192.168.0.1) Windows Server with a single NIC running RRAS (192.168.0.2 def. gateway = 192.168.0.1) Client Machine (192.168.0.3 def. gateway = 192.168.0.1) Using a VPN connection, I am trying to access a remote machine (10.0.0.1 for example) I configured RRAS with a demand-dial interface for the VPN and set it to be a persistent connection. As part of that setup, a static route to 10.0.0.0 (255.255.0.0) was created. When at the console of the server, I can ping 10.0.0.1 with no problems I added a route on the client machine using the following command: ROUTE ADD 10.0.0.0 MASK 255.255.0.0 192.168.0.2 If I run tracert 10.0.0.1 from the client, the first hop is to 192.168.0.2 which tells me that route is working. However, I cannot ping 10.0.0.1 from the client machine. What am I missing? Hopefully something simple.

    Read the article

  • Looking to get a small server – need web, PHP, PostgreSQL.

    - by Javawag
    Hi all! I'm looking to get a cheap (low end) server to serve web pages (xHTML/PHP), but I also need to be able to set up PostGreSQL on the system too. Ideally the server would have low power consumption, run Linux (I prefer Mac OS X but a Mac Mini, although the size I'm looking for, is too much money!) and be around £100 (~$160US). EDIT: Just to make it clearer, I'm looking to purchase the server hardware myself – but I want something about Mac Mini sized. I don't want to pay for hosting! Also, quick question – if it's to serve web pages from my home (standard ISP connection, no static IP!), what do I need in place to get this working. I'm guessing I would sign up with some service like no-ip, and register a domain to point to my no-ip address (then install the no-ip software on the server to update that with the current IP). I know the idea of running a server behind a normal ISP connection isn't very elegant, but I'd prefer to have the server where I can see it then pay over the odds for a hosting service where I have little to no control over what happens. Also, I could write my own server software for apps/etc to connect to as well. Anyways I'm rambling! What do you guys think?! Javawag

    Read the article

  • Secure data from a server to a workstation using jumper hosts

    - by apalsson
    Hello. I have a WWW-server, my problem is that the content is sensitive and should not be accessible for people without proper credentials. How can I improve the ease of use but still maintain security following scenario; The Server is accessed through a "jumper host", i.e. the client connects to the jumper using VPN-connection and uses RemoteDesktop to access the jumper. From the jumper he uses RemoteDesktop again to access the Server. Finally on the Server the user can access content using a WWW-browser. All the way from the VPN-client to the WWW-browser requires authentication using a SmartCard-token. This seems quite secure to me. Content only gets mirrored on the RemoteDesktop between Server and jumper, no cached files to worry about. Connection between jumper and client is protected using VPN(ssl), so no eavesdropping. But it is quite cumbersome for the clients with many steps and connections to open. :( So, how can I improve the user experience accessing my server without compromising security? Thanks.

    Read the article

  • Linux: CIFS/Samba mount hangs for several minutes

    - by Pistos
    I have a small local network which has a Gentoo box and a Windows box. I mount a share originating on the Windows box onto the Gentoo box with a command like: mount -t cifs -o username=WindowsUsername,password=thepassword,uid=pistos //192.168.0.103/Users /mnt/windowsbox Most of the time, everything Just Works, and I can read and write without problems. However, every few weeks or so, the connection or the mount point seems to go dead or hang, such that any process that tries to access the mount point gets stuck in D state (disk, or I/O wait). These processes become impervious to TERM and KILL signals. Disconnecting and reconnecting the Windows box from the network does not help. The frozen state lasts for 5+ minutes. It's really frustrating and gets in the way of normal work, because it freezes Save As dialogues, ls commands, etc. If I issue a umount on the mount point, it either hangs also, or reports that the mount point is in use. Eventually, the dead state resolves itself, and the mount point gets unmounted, or it becomes possible to umount with no delay. My guess is that this happens when the connection/mount has gone idle, or when the Windows machine has been idle. I am not really sure. Why is this happening, and what can I do to prevent it? Or how can I successfully kill these D-state processes at will? Possibly related: CIFS mounts hang on read

    Read the article

  • Windows Vista/7 dropping Mac Server share points

    - by Hooligancat
    My Windows Vista and Windows 7 clients are having problems maintaining access to SMB shares on a Mac server. The initial connection to the server appears to be OK, as the Windows clients can see all of the server share points. However, the client randomly drops a couple of the server share points although the clients can still see the server. For example. If I have the following share points on the Mac server: Share A Share B Share C Share D Share E The Windows client can see these shares most of the time and can access them most of the time. But randomly a couple of the shares will just get dropped or go missing from the Windows client's ability to view them so I end up with something like: Share B Share D Share E All the share points are established int the same way with the same permission settings. My Mac OSX Server is set up with the following for SMB: SMB sharing enabled Standalone Server Workgroup of `CORPORATE` Allow Guest Access = YES Client connections limit = 100 Authentication: NTLMv2 & Kerberos and NTLM Code Page is Latin US (437) This is a workgroup master browser WINS registration is set to Enable WINS server (tried with setting off) Enable virtual share points for homes YES I noticed in my SMB file service log that the clients appear to connect OK, but I get the following error which implies a reset by either the server or the client: /SourceCache/samba/samba-187.9/samba/source/lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.0.99. = Connection reset by peer I am a bit stumped as to a direction to turn to try and get this to resolve. Continued attempts to access the server from the client will reconnect to the share points, but they inevitably get dropped again in the near future. Any and all help much appreciated.

    Read the article

  • What does opening a serial port do?

    - by reve_etrange
    What does opening the standard PC serial port do, in electrical terms (i.e. what voltages on which pins)? For example, the ancient VB6 program which controls an apparatus I am tasked with maintaining toggles .PortOpen to control some TTL. The connection only used 2 pins (bad solders fell apart), so which pins do I solder to? The only labels / documentation refer to pins 7 and 9, saying 0V and 5V parenthetically, but does .PortOpen really just put 5V between RI and RTS?. As a post script, this isn't the weirdest thing about the set up. The TTL I referred to above also connects to an instrument via a BNC to DB9 (!), with only 1 pin used. I guess there was an assumption about a common ground, since the BNC shielding isn't connected to the GND pin? The connection is to the instrument's 'foot pedal' pin, it was a way to remotely trigger the device. Update According to this page, the DTR and RTS pins can go high when the port is opened. If they were so configured, they will subsequently go low when the port is closed. If DTR and RTS are not enabled, opening the port should set both to low (and keep them low).

    Read the article

  • ssh initial prompt hangs for 10 minutes but console login and initial prompt is very responsive - why?

    - by rfreytag
    I have been running an ESXi 4.0 server for months with a couple of WinServer2003 and several Ubuntu Server 10.4 VMs. The performance has been impressive on 6GB i7 Asus P6T hardware. Suddenly, a week ago, ssh logins to the Ubuntu VMs take 10 minutes when connecting over the LAN (over a WAN the connection (pipe) is broken long before that). When logging in to these VMs the password prompt arrives immediately, and failed passwords are responded to immediately. But the moment I log in then the shell prompt appears and I hang for many minutes. Sometimes the connection hangs before the shell prompt appears and sometimes I can type in a command but the moment I hit return the machine hangs. 10 full minute later control returns and the VM is responsive. NOTE: there are several Ubuntu VMs on the same host machine that are identical in all ways that I can tell. However, only one of the VMs displays this behavior. That is why I mention the ESXi host in passing - I don't think it has anything to do with the problem. This behavior is never seen when I connect with the troubled-VM's console (through vSphere Client). From the console the Ubuntu VMs all respond beautifully. I have seen: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003496&sliceId=1&docTypeID=DT_KB_1_1&dialogID=229586372&stateId=1%200%20229588522 ...and since that relates to delays in seeing the password prompt that does not appear to be the solution here. Any other suggestions very welcome - thank you.

    Read the article

  • Does a VPN requirement kill the concept of having a Web Application in the Cloud?

    - by Christian
    Recently I posted a question in SO, but so far I got no answers. I wonder if I'm asking the wrong question. This is the problem: We need to design an application which offers a public http web service, but at the same time it must consume some services through a VPN connection from other existing company. There is no other alternative but to use a VPN connection to access those services. We want to host our application in some cloud infrastructure like Heroku or Amazon EC2. But there is no direct way to access the VPN services of the other company from there. The solution I'm thinking, but I don't like is to have a different server to expose the services from that VPN. But this will require the setup of another server which I prefer to avoid. In the case this is the solution, can I use an Amazon EC2 instance to connect to a VPN? This is what I was thinking, is it correct? I don't have experience using VPNs, tunnels or those kind of networking stuff. I will really appreciate if you can propose me an alternative solution, or just give me a comment.

    Read the article

  • Simple vLAN setup

    - by Logan Bissonnette
    I have a basic lab environment set up to try and get 2 vLANs working in hyper-v. I have the following equipment 1 hyper-v server 1 Desktop PC 1 Managed Switch (d-link DES-3052P) 1 cheap router (DI-604) My end goal is to have 1 VM and the desktop on one vLAN with internet, and 1 VM on a separate vLAN with internet access. I am having troubles getting an internet connection to both vLANs. The switch does not have the ability to have asynchronous vLANs. This is my switch configuration Port 1 - Trunk Port - Connected to router Port 2 - Trunk Port - Connected to hyper-v Server Port 3 - Access Port- Connected to Desktop Within hyper-v I have 1 switch and 2 VMs. When the VMs are set up to use vlan ID 1, everything works fine. As soon as a VM is set up to use vlan ID 2, they lose all network connection and cannot communicate with the router anymore. I believe this is because the router is not vLAN aware. Can anyone help me with what settings need to be set up on my switch? I believe I want an egress rule so traffic leaving towards the router is untagged, is that right? If not, any ideas or hints as to what needs to be set up?

    Read the article

  • What is the max connections via remote desktop for a small server?

    - by Jay Wen
    I have a small server running MS Server 2012. The CPU is a Xeon E3-1230 V2 @ 3.30GHz, 4 Cores, 8 Logical Processors, 8 GB RAM. Main HD is a Samsung 840, and the big storage is a 4 disk WD Black Raid 10 Array in a Synology NAS enclusure. My question is: given this hardware, approximately how many users can the system support via "Remote Desktop Connection"? Assume there are no licensing limits. These are not admin users. I know there is a two admin limit. This boils down to: What resources does one remote connection require? RAM? % of the CPU? Networking bandwidth? I guess the base case would be for a conection where the user is inactive or simply browsing cnn. Once you know this, you know how many you could fit on the machine before something is maxed-out. In reality, users would be mostly on Excel (multi-MB spreadsheets). I know the approx. resources currently required by each copy of Excel.

    Read the article

  • Connections to SSH and Samba suffer from heavy delay

    - by Till Helge Helwig
    There are a lot of questions about SSH connections being delayed, which usually can be fixed by disabling the DNS lookups. Unfortunately this doesn't seem to be my problem. Our development server is accessed via SSH and Samba. When opening a connection to the server (either SSH or Samba) it takes a very long time. Accessing a Samba share via Windows is basically impossible because there is a timeout. Using smbclient works, but takes ages. When opening a SSH connection I get immediately prompted for the password and after hitting Enter the terminal instantly shows the MOTD. Afterwards it takes about a minute for the prompt to appear. I watched the load of the server while connecting via SSH and Samba and could not find anything out of order. There is nothing out of the ordinary running and hogging up memory and CPU or something. I have no clue where this delay might come from. I already tried UseDNS no in sshd_config and proxy_dns = no in smb.conf, but to no avail. Any idea about what might cause this would be greatly appreciated!

    Read the article

  • Raspberry pi slows down my entire network

    - by gnusouth
    Whenever my Raspberry Pi is connected to the network (via ethernet) the entire network is slowed to a crawl. On my main computer, ping times for google.com go from ~10ms to ~200ms and it takes forever to load web pages. Connections are also slow on the Pi, with an apt-get update showing pathetic speeds in the order of 1KB/s. Turning off the Pi completely removes the drag from the network. I've tried static and dynamic IP addresses for the Pi, but both have the same problems. I'm currently using Raspbian (downloaded today), but also had this problem with Arch Linux. I've checked the connection's duplex with dmesg | grep -i duplex, which shows that the Pi's connection is running at 100Mbps, full-duplex, as expected. My modem/router is a Billion 7404VNPX (an Australian thing); relatively high-end, albeit a bit buggy at times (it will occassionally delete all its firewall settings). It assigns IPs in the range 192.168.1.1 to 192.168.1.20 and has 192.168.1.254 as its own IP. When I assign static IPs I tend to use the 192.168.1.200 area. Does anyone have any idea as to what could be causing this weird slowdown? Or any tests I could try? Thanks

    Read the article

  • Win 8.1 Hyper-v Full Screen and VPN problems

    - by tr0users
    I need to connect to my office using Cisco VPN software (RSA). Once connected all my internet traffic goes through the employer's VPN and this prevents me from listening to spotify. As a way around this I created a Win 2012 VM that I run in hyper-v from my Windows 8.1 Client. First I RDP to the VM, then I connect to the VPN. This forces the RDP session between my host laptop and the VM to close. I then open the hyper-v manager and double-click my VM to get a connection back (not great because I don't get the use of copy & paste this way). Previously when I opened my VM this way I would have full screen. I'm using a 1920x1080 monitor. Today when I re-open my connection to the VM it is displayed in a window that uses maybe 75% of the full screen. I have tried the menu option View\Full Screen Mode only centres the screen and apply black borders around the outside. Could anyone please suggest how I may solve the VPN or Full Screen problems? Thanks Rob.

    Read the article

  • Changing the prompt in telnet

    - by wim
    With some help from people on here, I was able to set a custom prompt in an ssh session (thanks!). Now I need to do the same in telnet, but I'm not sure of what syntax I could use for that. Basically the telnet prompt is just a > character, I need to modify it to something I can more reliably detect in automation jobs. Hope this makes sense. From inside telnet, trying to escape that command with a bang like !PS1=spam and !PS2=eggs did not change it. wim@wim-acer:~$ ssh [email protected] -i ~/.ssh/guest_nopassphrase -t "export PS1='Sending a custom prompt \w \$ '; exec sh" Sending a custom prompt ~ $ set HOME='/var/tmp' IFS=' ' LOGNAME='guest' PATH='/sbin:/usr/sbin:/bin:/usr/bin' PPID='1128' PS1='Sending a custom prompt \w $ ' PS2='> ' PS4='+ ' PWD='' SHELL='/bin/sh' TERM='xterm' USER='guest' Sending a custom prompt ~ $ telnet localhost <snip> Entering character mode Escape character is '^]'. > !set CONSOLE='/dev/ttyp0' HOME='/var/tmp' IFS=' ' LOGNAME='root' PATH='/sbin:/bin:/usr/sbin:/usr/bin' PPID='546' PREVLEVEL='N' PS1='\w \$ ' PS2='> ' PS4='+ ' PWD='/var/tmp' RESPAWN_COUNT='1' RESPAWN_LAST='0' RESPAWN_MAX='5' RESPAWN_TIME='5' ROOTDEV='/dev/sla1' RUNLEVEL='5' SHELL='/bin/false' TERM='linux' USER='root' > > Connection closed by foreign host Sending a custom prompt ~ $ Connection to 192.168.1.124 closed. wim@wim-acer:~$

    Read the article

  • Manual NAT on Checkpoint (Redirect all http requests to a local web server)

    - by kulakli
    Hi, We have a proxy server in internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that say "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Trys to open www.google.com Should see web server output on local network Trys another web site on internet Should see web server output on local network Sets up proxy Trys to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), No replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my nat rule at checkpoint NGX R60 does not include return packets. I definitely need some help. Regards, Burak

    Read the article

  • “NT AUTHORITY\ANONYMOUS LOGON” error in Windows 7 (ASP.NET & Web Service)

    - by Tony_Henrich
    I have an asp.net web app which works fine in Windows XP machine in a domain. I am porting it to a Windows 7 stand alone machine. The app uses a web service which makes a call to sql server. The web server (IIS 7.5) and SQL Server are on the same stand alone machine. I enabled Windows authentication for the website and web service. The web service uses a trusted connection connection string. The web service credentials uses System.Net.CredentialCache.DefaultCredentials. I noticed username, password and domainname are blank after the call! The webservice and web site use the 'Classic .NET AppPool' with NetworkServices identity. I am getting an exception "NT AUTHORITY\ANONYMOUS LOGON" in the database call in the web service. I am assuming it's related to the blank credentials. I am expecting ASPNET user to be the security token to the database. Why is this not happening? Did I miss a setting? (Usually this happens when sql server and web server are on two different machines in a domain, delegation & double hopping, but in my case everything is on a dev box)

    Read the article

  • Create image (EBS AMI) takes forever - possibly caused MySQL Server to break?

    - by fuzzybee
    I'm trying to create an EBS AMI from my running EC2 instance to reuse my LAMP fully configured (for my needs). I got my website up and running yesterday on this EC2 instance my MySQL was working fine until this morning (it's not that difficult to install LAMP thanks to yum so I can't see how I could go wrong with this; having said that, it's always difficult for one to realise his own errors) I have seen "Loading, please wait ..." for a few hours now. How do I know whether this is completed or its progress? Shortly after I tried to create the AMI image from my EC2 instance, I encountered database connection error can't connect to local mysql server through socket '/var/lib/mysql/mysql.sock' I was able to restart mysqld at first. But database connection was down again. This time, I could not restart mysqld anymore. It shows MySQL Daemon failed to start. Could my attempt to create the AMI by any chance cause the MySQL server to reboot or corrupt? I did a lot of searched and have done the following although I think I shouldn't have to do any workaround for MySQL server to work here chown -R mysql.mysql /var/lib/mysql/ I also found this workaround but I'm very reluctant to follow due to my belief and the fact I would need to understand this problem first. Any help would be greatly appreciated. Getting back to searching for a solution for the MySQL server problem ... Thanks, Eric

    Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >