Search Results

Search found 30771 results on 1231 pages for 'machine language'.

Page 296/1231 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

• mounting vsphere 4.0 file system in ubuntu linux

  - by sravan

  hi all, I am using VSpere 4.0 for my project work. I needed 4-5 servers my project work which is based on Database. I felt the virtualisation is very good to get the 5 servers running good at the same time. It was running good until few days back. Yesterday, it suddenly crashed and i had no idea of the reason.Today, it did not even boot up. Now, i need to take the data backup from that system. In order to do the same, i got the hard drive from the machine and tried to mount it on local linux machine.But, i was not successful. The disk was not even recognized by the linux machine. Can some one please tell me how to mount it and get the required data? Thank you all

  Read the article

• Securing a persistent reverse SSH connection for management

  - by bVector

  I am deploying demo Ubuntu 10.04 LTS servers in environments I do not control and would like to have an easy and secure way to administer these machines without having to have the destination firewall forward port 22 for SSH access. I've found a few guides to do this with reverse port (e.g. howtoforge reverse ssh tunneling guide) but I'm concerned with security of the stored ssh credentials required for the tunnel to be opened automatically. If the machine is compromised (primary concern is physical access to the machine is out of my control) how can I stop someone from using the stored credentials to poke around in the reverse ssh tunnel target machine? Is it possible to secure this setup, or would you suggest an alternate method?

  Read the article

• Why do "Joke" programming languages exist? [closed]

  - by ThePlan

  First of all please be aware this post contains some abusive language but I hope it will not bother anyone. I apologize for the bad language but that's what the name is. As I've been doing documentation on existing programming languages attempting to make a complete list of them I stumbled across terrible programming languages, which were clearly not made for actual use and implementation due to their insane difficulty. Languages such as Brainfu*k and LOLCODE or Whitespace are fool languages because they have no real use. For example, a "Hello world" program written in BrainFu*k. Taken from Wikipedia: The following program prints "Hello World!" and a newline to the screen: +++++ +++++ initialize counter (cell #0) to 10 [ use loop to set the next four cells to 70/100/30/10 > +++++ ++ add 7 to cell #1 > +++++ +++++ add 10 to cell #2 > +++ add 3 to cell #3 > + add 1 to cell #4 <<<< - decrement counter (cell #0) ] > ++ . print 'H' > + . print 'e' +++++ ++ . print 'l' . print 'l' +++ . print 'o' > ++ . print ' ' << +++++ +++++ +++++ . print 'W' > . print 'o' +++ . print 'r' ----- - . print 'l' ----- --- . print 'd' > + . print '!' > . print '\n' or another example taken from LOLCODE language: HAI CAN HAS STDIO? PLZ OPEN FILE "LOLCATS.TXT"? AWSUM THX VISIBLE FILE O NOES INVISIBLE "ERROR!" KTHXBYE These languages are very difficult to learn/read/work with. My question is - Why do they exist? What is the purpose of them? Also, is there an official "name" for these type of languages?

  Read the article

• Why am I seeing excessive disk activity when installing applications?

  - by Kev

  I'm running Windows 7 Ultimate 64 bit on a Dell Vostro 1720 with 8GB of RAM, 7200RPM Disk, 2.53 GHz Core2Duo (Windows 7 64 bit is a supported option and the laptop came with the OS pre-installed). I'm noticing some fairly excessive disk activity when running installers. For example the Visual Studio 2010 RC installer constantly accessed the disk for ~10 minutes. It was so excessive that I was unable to use the machine until this ceased. Today I installed Trillian Astra 4.1 for Windows (latest build from the website). Again when I ran the installer I was pretty much locked out of the machine until the disk activity calmed down. In both cases when I eventually managed to launch task manager I could see that the CPU was sitting at around 5% to 7% utilisation whilst this was going on. All other disk related activity is fine, the machine is snappy and applications launch without delay. It's just when I run an installer I see this odd behaviour. Why would this be?

  Read the article

• Ruby Development Gains Commercial Support on Java as New JRuby Version Looms

  The JRuby language gets commercial support as a major new JRuby version approaches, promising easier integration of Ruby development and Java.

  Read the article

• Ruby Development Gains Commercial Support on Java as New JRuby Version Looms

  The JRuby language gets commercial support as a major new JRuby version approaches, promising easier integration of Ruby development and Java.

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• Can you shrink the sparse disk image of a Mac OS X guest OS in VMWare Fusion?

  - by Paul D. Waite

  I use VMWare Fusion on my Mac to run a virtual Windows 7 machine, and the Microsoft IE compatibility Windows XP virtual machines. In VMWare Tools on the Windows guest OSes, there’s a “Shrink” option that lets you reduce the size of the sparse disk image used by the guest OS, to save hard drive space on your host OX. I’ve recently created another virtual machine, this time running Snow Leopard Server. I was wondering if I could shrink the spare disk image used by this machine too, but I can’t find a VMWare Tools app on the Mac guest OS, even though VMWare Tools have been installed (as VMWare’s Shared Folders feature is working). Is there any way to shrink the sparse disk image used by Mac OS X guest OSes in VMWare Fusion?

  Read the article

• Ubuntu 12.04 and Nvidia GTX 550 Ti

  - by Jim

  OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

  Read the article

• Should I use parentheses in logical statements even where not necessary?

  - by Jeff Bridgman

  Let's say I have a boolean condition a AND b OR c AND d and I'm using a language where AND has a higher order of operation precedent than OR. I could write this line of code: If (a AND b) OR (c AND d) Then ... But really, that's equivalent to: If a AND b OR c AND d Then ... Are there any arguments in for or against including the extraneous parentheses? Does practical experience suggest that it is worth including them for readability? Or is it a sign that a developer needs to really sit down and become confident in the basics of their language?

  Read the article

• Active Directory: trouble adding new DC

  - by ethrbunny

  I have a domain with 3 DCs. One is starting to fail so I brought up a new one. All are running Win 2003. Problem: there appear to be replication issues between the 4 machines but I can't figure out what's causing this. All are registered with the DNS as identically as I can make them. How do I know there is a problem? Nagios is telling me that the other 3 DCs are having KCCEvent errors and the new machine is reporting "failed connectivity" errors. Doing dcdiag on the new machine reports: the host could not be resolved to an IP address. This seems crazy as I log into it using the DNS name. I can ping it from the other three machines using this DNS name as well. repadmin /showreps from the new machine says its seeing the other 3 machines. Doing the same from one of the older machines doesn't show the new machine. I've tried netdiag /repair numerous times. No luck. There are no firewalls running on any of the machines. If I look at Domain info via MMC (on the new machine) it appears that all the information is current. Users, computers, DCs.. its all there. Im puzzled as to what step(s) I've missed in adding this new machine. Suggestions? EDIT: dcdiag from non-working: C:\Documents and Settings\Administrator.BME>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\YELLOW Starting test: Connectivity The host 312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc Although the Guid DNS name (312ce6ea-7909-4e15-aff6-45c3d1d9a0d9._msdcs.server.edu) couldn't be resolved, the server name (yellow.server.edu) resolved to the IP address (10.127.24.79) and was pingable. Check that the IP address is registered correctly with the DNS server. ......................... YELLOW failed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\YELLOW Skipping all tests, because server YELLOW is not responding to directory service requests Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck dcdiag from working: P:\>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\AD1 Starting test: Connectivity ......................... AD1 passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\AD1 Starting test: Replications ......................... AD1 passed test Replications Starting test: NCSecDesc ......................... AD1 passed test NCSecDesc Starting test: NetLogons ......................... AD1 passed test NetLogons Starting test: Advertising ......................... AD1 passed test Advertising Starting test: KnowsOfRoleHolders ......................... AD1 passed test KnowsOfRoleHolders Starting test: RidManager ......................... AD1 passed test RidManager Starting test: MachineAccount ......................... AD1 passed test MachineAccount Starting test: Services ......................... AD1 passed test Services Starting test: ObjectsReplicated ......................... AD1 passed test ObjectsReplicated Starting test: frssysvol ......................... AD1 passed test frssysvol Starting test: frsevent ......................... AD1 passed test frsevent Starting test: kccevent ......................... AD1 passed test kccevent Starting test: systemlog ......................... AD1 passed test systemlog Starting test: VerifyReferences ......................... AD1 passed test VerifyReferences Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : bme Starting test: CrossRefValidation ......................... bme passed test CrossRefValidation Starting test: CheckSDRefDom ......................... bme passed test CheckSDRefDom Running enterprise tests on : server.edu Starting test: Intersite ......................... server.edu passed test Intersite Starting test: FsmoCheck ......................... server.edu passed test FsmoCheck P:\>

  Read the article

• Cannot access internet or remote network after connecting to Windows VPN

  - by Kiewic

  I set up a VPN by creating an incoming VPN connection (VPN server) in my Windows 8 machine at home (not a Windows Server). I forwarded the PPTP port in my router (port 1723) to this machine and enabled PPTP passthrough. In a second Windows 8 machine out of home, I created an outgoing VPN connection (VPN client). And I am able to connect to my home VPN, but I don't have access to any home resource or even internet. This is the output of the client ipconfig: And this are the settings of my VPN server: UPDATE: My VPN server has assigned the 192.168.1.144 IP adress at my home network. So, I tried setting the "IP address assignment" range from 192.168.1.150 to 192.168.1.200. And when a VPN client gets connected, it gets an address in that range, but it doesn't make any difference.

  Read the article

• Is it a good practice to use smaller data types for variables to save memory?

  - by ThePlan

  When I learned the C++ language for the first time I learned that besides int, float etc, smaller or bigger versions of these data types existed within the language. For example I could call a variable x int x; or short int x; The main difference being that short int takes 2 bytes of memory while int takes 4 bytes, and short int has a lesser value, but we could also call this to make it even smaller: int x; short int x; unsigned short int x; which is even more restrictive. My question here is if it's a good practice to use separate data types according to what values your variable take within the program. Is it a good idea to always declare variables according to these data types?

  Read the article

• How to better start learning programming - with imperative or declarative languages?

  - by user712092

  Someone is interested in learning to program. What language paradigm should I recomend him - imperative or declarative? And what programming language should he start with? I think that declarative because it is closer to math. And I would say that Prolog might be the best start because it is based on logic and programs are short. On the other hand at school we started learning from imperative languages and I am not sure whether there is a benefit to start with them instead of declarive ones. Thanks. :)

  Read the article

• Understanding Application binary interface (ABI)

  - by Tim

  I am trying to understand the concept of Application binary interface (ABI). From The Linux Kernel Primer: An ABI is a set of conventions that allows a linker to combine separately compiled modules into one unit without recompilation, such as calling conventions, machine interface, and operating-system interface. Among other things, an ABI defines the binary interface between these units. ... The benefits of conforming to an ABI are that it allows linking object files compiled by different compilers. From Wikipedia: an application binary interface (ABI) describes the low-level interface between an application (or any type of) program and the operating system or another application. ABIs cover details such as data type, size, and alignment; the calling convention, which controls how functions' arguments are passed and return values retrieved; the system call numbers and how an application should make system calls to the operating system; and in the case of a complete operating system ABI, the binary format of object files, program libraries and so on. I was wondering whether ABI depends on both the instruction set and the OS. Are the two all that ABI depends on? What kinds of role does ABI play in different stages of compilation: preprocessing, conversion of code from C to Assembly, conversion of code from Assembly to Machine code, and linking? From the first quote above, it seems to me that ABI is needed for only linking stage, not the other stages. Is it correct? When is ABI needed to be considered? Is ABI needed to be considered during programming in C, Assembly or other languages? If yes, how are ABI and API different? Or is it only for linker or compiler? Is ABI specified for/in machine code, Assembly language, and/or of C?

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• Existing laravel 4 project gives 404 in browser

  - by Richard A

  I'm trying to set up a development environment on a virtual machine running Ubuntu 14.04 LTS using Nginx and HHVM. To do this, I followed the tutorial here. This goes well with a new installation of Laravel. But when I import an existing Laravel 4 project and try to open that on my actual machine (which will serve as the client running Windows 7), I'm getting a 404 File Not Found error on the screen while connecting to http://sav.savrichard.dev. I did add this to the hosts file with the correct IP Address. The virtual machine is receiving the request and responds with a 404 error. How do I solve this error? I'm pretty new to Ubuntu so I'm not exactly sure what's wrong. The project is located at /var/www/sav.savrichard.net The server configuration is as follow: server { listen 80 default_server; root /var/www/sav.savrichard.net/public; index index.html index.htm index.php; server_name sav.savrichard.dev; access_log /var/log/nginx/localhost.sav.savrichard.dev-access.log; error_log /var/log/nginx/localhost.sav.savrichard.dev-error.log error; charset utf-8; location / { try_files \$uri \$uri/ /index.php?\$query_string; } location = /favicon.ico { log_not_found off; access_log off; } location = /robots.txt { log_not_found off; access_log off; } error_page 404 /index.php; include hhvm.conf; # Deny .htaccess file access location ~ /\.ht { deny all; } } And the hhvm.conf file is: location ~ \.(hh|php)$ { fastcgi_keep_conn on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; }

  Read the article

• Novice developer

  - by Shrikant

  Sir. I'm a student of B.Tech final year from the CSE branch. I'm using Ubuntu since the last 3 years. It gave me a lot of knowledge. So now I want to repay Ubuntu back by developing some apps for Ubuntu, but I don't know which language I should choose: Java, C or C++ or something else. So please, guide me how to start. I have intermediate knowlegde of C, C++ , Java & Linux scripts. So in which language should i start? I don't have any live software development knowledge so explain me everything. Thank you

  Read the article

• Camtasia on remote computer?

  - by daughtkom

  I have a need to use one laptop for a live presentation (with projector, etc.), but record that presentation on another laptop -- similar to what I can do with Camtasia, only with the recording happening on another laptop. Is this possible? What do I need to do this? Some VGA device that goes between the presenting machine and the projector? Some USB device? My ideal requirements: The machines must be "standard" laptops (so I can't just add a new card to a desktop, etc.). I prefer a hardware solution, but cannot involve studio type equipment. I'd prefer not to install Camtasia (or similar) on the presenting machine for two reasons: licensing issues performance issues (sometimes the presentations are machine intensive and I don't want the recording software to interfere with the presentation) I'd appreciate any tips. Thanks.

  Read the article

• Highly Available Web Application (LAMP)

  - by Anthony Rizzo

  I work for a small company who provides a web application for thousands of users. Earlier this year they had one server hosted one company. We recently acquired another server in a different location with the hopes of one day making this a redundant failover machine. I understand what to do with the mysql replication, I plan on using a master-master replication setup, and rsync to sync the scripts and files, however I am at a stand still about how to configure the fail-over. Ideally I would like the two machines to accept requests, like a round robin dns, however if one machine goes down I do not want requests to go that machine. All of the solutions I am come across assumes high availability of servers in the same location, these servers are in two completely different locations with different public ip address. Any help would be great. Thanks

  Read the article

• How to identify process that's sending error messages to terminal?

  - by kjo

  The following error message occasionally appears in my terminal: Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory ...which is pretty annoying. I have searched online for solutions to this error, without success. Is there any way to at least identify the process responsible for sending these error messages to my terminal? EDIT: Let me clarify that, as far as I can tell, these error messages appear "out of the blue". In fact, they appear asynchronously with respect to my interactions with the terminal (more often than not see them for the first time when I return to a terminal window that has been unattended for some time). I'm sure there's a definite, deterministic cause for these messages, but it is not one that I can readily identify. In short, I have not noticed any pattern or regularity to their occurrence. In particular, in my case their occurrence has nothing to do with running mplayer, or any other video playback program. (Please my earlier post about it here.) For one thing, the machine in question is a work machine, and I rarely watch any videos with it. In the very few instances in which I've watched a video on this machine I've used VLC, not mplayer, and these errors never appeared in these rare occasions that I used VLC.

  Read the article

• Sun Java crashing, mostly with jboss

  - by Joel

  I'm on Ubuntu 10.10. I keep having problems with Sun Java crashing on me. I mostly have it crashing on my Jboss server, but I've had it crash MANY MANY times running ANT tasks or the IntelliJ IDE. Here's what it prints: # # A fatal error has been detected by the Java Runtime Environment: # # SIGSEGV (0xb) at pc=0x00007f67e665d440, pid=21260, tid=140082772170512 # # JRE version: 6.0_22-b04 # Java VM: Java HotSpot(TM) 64-Bit Server VM (17.1-b03 mixed mode linux-amd64 ) # Problematic frame: # V [libjvm.so+0x2f2440] # # An error report file with more information is saved as: # /home/blah/blah/blah/hs_err_pid21260.log # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # Aborted A co-worker of mine who has the same version of Ubuntu has had the same problem, but has only happened to him once. (I get this probably 2 or 3 times a day, if not more). I have another machine running Ubuntu 10.04 with Sun Java and I have yet to see this problem. 1.0.6_20 is the java version on the 10.04 machine. My machine is running 1.6.0_22. Has anyone else had this problem? Anyone know how to keep it from happening? Also: I have tried reinstalling it and I can't use OpenJDK.

  Read the article

• setting up ssh on minix 3.2

  - by Mark

  I have install MINIX 3.20 on VMware player on LINUX. Now, I am trying to ssh into Minix from the same Linux machine, but I am encountering some problems. First I installed openssh on MINIx then I tried to ssh onto the Minix virtual machine with ssh [email protected] but I got the following output: [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied (publickey,password,keyboard-interactive). I am sure the password I entered is correct, I have tried to ssh into MINIX on MINIX and it worked but not when I tried it from my linux machine. I have followed the steps for setting up ssh from this webpage, but it didn't work as shown above.

  Read the article

• Can I automatically add a new host to known_hosts ?

  - by gareth_bowles

  Here's my situation; I'm setting up a test harness that will, from a central client, launch a number of virtual machine instances and then execute commands on them via SSH. The virtual machines will have previously unused hostnames and IP addresses, so they won't be in the ~/.ssh/known_hosts file on the central client. The problem I'm having is that the first SSH command run against a new virtual instance always comes up with an interactive prompt: The authenticity of host '[hostname] ([IP address])' can't be established. RSA key fingerprint is [key fingerprint]. Are you sure you want to continue connecting (yes/no)? Is there a way that I can bypass this and get the new host to be already known to the client machine, maybe by using a public key that's already baked into the virtual machine image ? I'd really like to avoid having to use Expect or whatever to answer the interactive prompt if I can.

  Read the article

• restrict windows remote desktop

  - by radioactive21

  Is there any way to prevent users from launching and using remote desktop and to restrict it to only local admins or domain admins? The reason being is that we do not want users to remote desktop home, but at the same time we want it to be available to certain users like administrators or power users. Ideally there is a group policy that can be set to groups or users who have access to the remote desktop application from their machine. Clarifications: I need the machine to be able to still have remote desktop work, just only with a specific user or group. The point is that we allow certain users to use remote desktop and others to not have access to it. There are machines where there are multiple users, so we cant just block a whole machine or by IP. This needs to be done per a user account or login.

  Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >