Search Results

Search found 15591 results on 624 pages for 'problems'.

Page 296/624 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• Keyboard causing freezes

  - by fluteflute

  My problem started on Windows XP: a computer (that was working fine for many years) had a problem, that I can't quite remember (may have been to do with the startup process) - but I solved it by swapping the keyboard with one on another machine. Now for several years the problematic keyboard has been working fine - on my main machine that runs Ubuntu. I also dual boot Windows XP - and have had no problems on either OS. However I recently installed Ubuntu 11.04 Natty (pre-alpha) and found that any keyboard press causes freezes. (All still works fine on Ubuntu 10.10 and 10.04 and Windows XP) Just wondering why I might be experiencing this? Seems strange to me that's its not consistent.

  Read the article

• Lost "VGA Display" color profile in OS X

  - by Justin Love

  OS X Display settings used to have a color profile named VGA Display, which I found quite usefully for finding color problems before hooking up a projector. Currently, this profile (along with a number of others I've collected from projectors in the past year) is not available. I'm currently OS X 10.6.6 and my best guess is the profiles got wiped out during the last upgrade. None of the available color profiles seem to stink quite enough. Am I overlooking a renamed profile? Is there somewhere I could get a 'VGA Display' profile to install on my computer?

  Read the article

• How to get the basic mail command in ubuntu 10 to work

  - by Maureen Adamson

  I am a college lecturer to whom the task of supporting the students' Linux Server has fallen. My students just need to use the mail command to communicate with me and each other. I thought mail would be there by default but it wasn't. I have tried all the advice I found on the Internet and tried to install mailutils, sendmail, mailx, exim4 and postfix. There were more but I can't remember them all now. After installing (if it works - some of them don't), when I try to send a message they all give me: /usr/sbin/sendmail: file or directory not found. I don't need anything fancy - we don't need to access remote email, just locally on our server. Incidentally the same problems are occurring on the physical server and my test virtual machine, installed at different times but both Ubuntu 10. Can anyone help me?

  Read the article

• EMEA OTN Virtual Technology Summit - Hands-On Learning

  - by Thanos Terentes Printzios

  The Oracle Technology Network (OTN) is excited to invite you to our first Virtual Technology Summit. EMEA – Thursday July 10th / 9am to 1pm BST / 10am – 2pm CET / 12pm to 4pm MSK / GST - Register Now Learn first hand from Oracle ACEs, Java Champions, and Oracle product experts, as they share their insight and expertise on using Oracle technologies to meet today’s IT challenges. This interactive, online event offers four technical tracks, each with a unique focus on specific tools, technologies, and tips in these focus areas. Java – Big Trends and Technologies – Java lets you mine Big Data, build robust apps with HTML5, JavaScript and Java EE, and expand into the Internet of Things. Experts will present and you’ll be able to chat with them live online. Don’t miss out on this great opportunity to learn from some of the best minds in the Java community. Systems – OS Tips and Tricks for Sysadmins – Learn first hand how to configure Oracle Linux to run Oracle Database 11g and 12c, how to use the latest networking capabilities in Oracle Solaris 11, and how to troubleshoot networking problems in Unix and Linux systems. Database – Mastering Oracle Database Management & Development Techniques – Experts will present advanced features and management methods that will help you master your Oracle Database capabilities and drive greater performance, agility and manageability of your IT implementation. This track will build upon your skills with data management, migration, and performance. Middleware – The Architecture of Analytics: Big Time Big Data and Business Intelligence – This track will present a solution architect’s perspective on how business intelligence products in Oracle’s Fusion Middleware family and beyond fit into an effective big data architecture, and present insight and expertise from Oracle ACEs specializing in business Intelligence to help you meet your big data business intelligence challenges. This same content is being offered at 3 different dates listed below, at times convenient for all regions Americas - Wednesday July 9th EMEA – Thursday July 10th APAC English - July 16th 9am to 1pm PST12pm to 4pm  EST1 to 5 pm BRTRegister 9am to 1pm BST10am – 2pm CET12pm to 4pm MSK / GSTRegister IST – 10:00amSG – 12:30pmAEST – 2:30pmRegister The full event agenda is available at https://wikis.oracle.com/display/OTNVirtualTechSummit/Home

  Read the article

• Alternative to nofollow: custom 302 url shortener?

  - by Dogweather

  Here's the scenario: lots of blogging platforms make it tedious to insert nofollow into links within the post content. I.e., you need to edit the html, format it correctly, etc. I have a client who posts lots of content with links that should be nofollow'ed, and I thought of a novel way to handle this, since the blogging platform they're using makes it hard: I install a URL shortener web app on the client's domain. The shortener works as normal, except it redirects via 302 instead of 301. The pagerank will therefore stay at the shortener's domain, and not flow on to the target site. Part 2: In order to get the pagerank to collect meaningfully, say on the site's home page, the shortened URLs would be generated like this: /link?12345 instead of /link/12345. And then, the path /link would 301 to the home page. This way, the id is a param, not a path element. And thus, all the incoming shortened links are going to one path, which transfers pagerank to the home page. So that's my idea. I wanted to see if anybody could find problems with it. Thanks!

  Read the article

• UNESCO, J-ISIS, and the JavaFX 2.2 WebView

  - by Geertjan

  J-ISIS, which is the newly developed Java version of the UNESCO generalized information storage and retrieval system for bibliographic information, continues to be under heavy development and code refactoring in its open source repository. Read more about J-ISIS and its NetBeans Platform basis here. Soon a new version will be available for testing and it would be cool to see the application in action at that time. Currently, it looks as follows, though note that the menu bar is under development and many menus you see there will be replaced or removed soon: About one aspect of the application, the browser, which you can see above, Jean-Claude Dauphin, its project lead, wrote me the following: The DJ-Native Swing JWebBrowser has been a nice solution for getting a Java Web Browser for most popular platforms. But the Java integration has always produced from time to time some strange behavior (like losing the focus on the other components after clicking on the Browser window, overlapping of windows, etc.), most probably because of mixing heavyweight and lightweight components and also because of our incompetency in solving the issues. Thus, recently we changed for the JavaFX 2.2 WebWiew. The integration with Java is fine and we have got rid of all the DJ-Native Swing problems. However, we have lost some features which were given for free with the native browsers such as downloading resources in different formats and opening them in the right application. This is a pretty cool step forward, i.e., the JavaFX integration. It also confirms for me something I've heard other people saying too: the JavaFX WebView component is a perfect low threshold entry point for Swing developers feeling their way into the world of JavaFX.

  Read the article

• NVCPL.DLL in RunDLL can't be initiated on startup

  - by Alfred Larsson

  I got a new computer and installed Windows 8. But everytime I start up I get this message: (Couldn't post the images because of my low reputation. But here is what they said) Was in Swedish, translated: RunDLL There was a problem with the start of NVCPL.DLL The initiation of a DLL-file failed I have no idea what it does and how to fix it. I don't know if this will help but I have got some more problems with DLL files. Here is an example: ** QuickTime for Windows** A problem has occurred with the windows-installer package. A DLL-file which is needed for this installation couldn't be used. Contact support or distributor.

  Read the article

• Maintaining a main project line with satellite projects

  - by NickLarsen

  Some projects I work on have a main line of features, but are customizable per customer. Up until now those customizations have been implemented as preferences, but now there are 2 problems with the system... The settings page is getting out of control with features. There are probably some improvements that could be made to the settings UI, but regardless, it is quite cumbersome setting up new instances for new customers. Customers have started asking for customizations which would be more easily maintained as separate threads instead of having tons of customizations code. Optimally I am envisioning some kind of source control in which features are either in the main project line and customizations per customer are maintained in a repo per customer set up. The customizations per project would need to remain separate but if a bug is found and fixed in a particular project, I would need to percolate the fix back to the main line and into all of the other customer repos. The problem is I have never seen this done before, and before spending time trying to find source control that can accommodate this scenario and implement it, I figure it best to ask if anyone has something less complicated or knows of a source control product which can handle this with very little hair pulling.

  Read the article

• Working with Reporting Services Filters–Part 5: OR Logic

  - by smisner

  When you combine multiple filters, Reporting Services uses AND logic. Once upon a time, there was actually a drop-down list for selecting AND or OR between filters which was very confusing to people because often it was grayed out. Now that selection is gone, but no matter. It wouldn’t help us solve the problem that I want to describe today. As with many problems, Reporting Services gives us more than one way to apply OR logic in a filter. If I want a filter to include this value OR that value for the same field, one approach is to set up the filter is to use the IN operator as I explained in Part 1 of this series. But what if I want to base the filter on two different fields? I  need a different solution. Using the AdventureWorksDW2008R2 database, I have a report that lists product sales: Let’s say that I want to filter this report to show only products that are Bikes (a category) OR products for which sales were greater than $1,000 in a year. If I set up the filter like this: Expression Data Type Operator Value [Category] Text = Bikes [SalesAmount]   > 1000 Then AND logic is used which means that both conditions must be true. That’s not the result I want. Instead, I need to set up the filter like this: Expression Data Type Operator Value =Fields!EnglishProductCategoryName.Value = "Bikes" OR Fields!SalesAmount.Value > 1000 Boolean = =True The OR logic needs to be part of the expression so that it can return a Boolean value that we test against the Value. Notice that I have used =True rather than True for the value. The filtered report appears below. Any non-bike product appears only if the total sales exceed $1,000, whereas Bikes appear regardless of sales. (You can’t see it in this screenshot, but Mountain-400-W Silver, 38 has sales of $923 in 2007 but gets included because it is in the Bikes category.)

  Read the article

• Is Sony Vegas Pro 8 uable to import AC3? How to enable?!

  - by gojira666

  I am using Sony Vegas Pro 8.0b. I want to import an AVI (DivX), where the audio codec used is "0x2000 (Dolby AC3) AC3 ", according to GSpot. I later want to render this video again in another codec etc. I have done videoconversion with Vegas 8 many times and ususally do not run into any problems. However with this particular video, the audio stream simply does not show up in the track list or anywhere! There is simply no audio (the video is fine). Questions: is Sony Vegas Pro 8.0 unable to import AC3? If yes, can I make it so that it becomes able to do so and how?

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• How do i mitigate DDOS attacks on static servers?

  - by acidzombie24

  Here is a slightly different take on DDOS attacks. Rather than a server with dynamic content being attack i was curious how to deal with attacks on servers with STATIC CONTENT. This means cpu tends to not be an issue. Its either bandwidth or connection problems. How would i mitigate a DDOS attack knowing nothing about the attacker (for example country, ip address or anything else). I was wondering is shorting the timeout and increasing amount of connections is an acceptable solution? Or maybe that is completely useless? Also i would limit the amount of connections per IP address. Would the above help or be pointless? Keeping in mind everything is static checking for multiple request of the same page (html, css, js, etc) could be a sign of a attack. What are some measures i can take on a static content server?

  Read the article

• Command+tab, expose and many other functions stop working after screen sharing

  - by moshen

  When I'm away from my office mac I typically login via screen-sharing or VNC from home/another mac. Lately, after using screen sharing this way, my office mac will have several problems: Command+tab and Command+` no longer work Expose and other F-key functions no longer work ctrl+space to launch Google QSB no longer works Things I have tried to remedy this: Restarting the Finder process Restarting the Dock process Disabling the screensaver Unfortunately, the screensaver still runs... A connected issue? Deleting preference files for Dock/Finder/screensaver etc. The only thing that seems to work is a restart. I usually try and avoid that. System details: Macbook pro 13" OS v10.5.8

  Read the article

• Cannot boot from a hard drive

  - by Martin Melka

  I have a problem booting from a hdd. I used to have it as my main drive before I bought an SSD, so I had been able to boot from it. But for some reason, now, half a year later, I can't get it to work. I completely erased it, deleting data and partitioning (using EASEUS Partition Master), then I installed Kubuntu (without changing anything in the installer), but it simply won't boot up. It always boots the drive with Windows and when I unplug this drive, it only gives me an error "PXE-E61: Media test failure, check cable", I guess it's trying to boot from LAN. I tried installing the system on a freshly deleted drive, without any other drives plugged in the pc, but the problems persist. This is how the drives look now (first one has Windows 7 installed, the second one Kubuntu): I am lost. I mean, after doing a fresh wipe and a clean install without altering anything, it should work. But it doesn't. What can be wrong here? Thanks

  Read the article

• Reliability of S.M.A.R.T.?

  - by Mark

  I've been using ActiveSmart to monitor my hard-drives health for a few weeks now, and its telling me my brand new 1.5 TB hard-drive is half-dead already. About on-par with one of my hard-drives which I know is at least half dead because I've been having some read errors and heard ticking noises. Now I haven't actually noticed any problems with my 1.5 TB drive; should I be concerned that it's going to crap out on me too? Or could ActiveSmart be giving a mis-diagnosis because I use it a lot or something (I've used up 795 GB in the 2 and a half weeks I've had it). The events that ActiveSmart has been catching is "Hardware ECC recovered". Maybe these new fangled super big hard-drives somehow rely on ECCs to squeeze out the extra space, but this isn't actually a cause for concern?

  Read the article

• Operating System not Found after installing Ubuntu in a Sony Vaio

  - by diego8arock

  I just bought a Sony Vaio SVS15115FLB that came with Windows 7, after enjoying the PC graphic power for a little, I decided it was time to install Ubuntu 12.04. First, I inserted a USB stick, reboot, press F11 but a message saying that no OS was found on the USB, so then I used a live CD. It booted fine and I installed Ubuntu, then when it was time to restart the PC, it didn't boot to GRUB but it went straight to Windows and it began an startup error and was looking for a solution, after it was done, it restarted and then it booted again to Windows and to the same start up error solution thing. I freaked out, so I booted again the Ubuntu live CD, and installed Ubuntu over everything, after it installed I rebooted and then a message appeared saying Operating system Not Found, and I have no idea why. So I Googled again and found this post on Boot Partition, I did everything exactly on that post, but it didn't work (by the way, this was the message): The boot files of [Ubuntu 12.04 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. It appeared the first time, then I did it all again and then it was gone. I rebooted and nothing, the same Operating System not found message appeared. So I decided to create a partition for Windows, hoping for something, but the message still appears. I really have no idea what to do, but there is something odd, if I insert the USB stick containing Ubuntu 11.10, the message that says that there is no OS in the PendDrive flashes for a fraction of a second and the boot straight to Ubuntu 12.04 without problems (and booted to Windows when I installed it, ignoring Ubuntu), right now I'm using it like that, but its pretty annoying. Can anyone advise me how to fix this? I'm no expert on this kind of things (boot, GRUB, recovery and stuff like that).

  Read the article

• DataContractSerializer truncated string when used with MemoryStream,but works with StringWriter

  - by Michael Freidgeim

  We've used the following DataContractSerializeToXml method for a long time, but recently noticed, that it doesn't return full XML for a long object, but  truncated it and returns XML string with the length of  multiple-of-1024 , but the reminder is not included. internal static string DataContractSerializeToXml<T>(T obj) { string strXml = ""; Type type= obj.GetType();//typeof(T) DataContractSerializer serializer = new DataContractSerializer(type); System.IO.MemoryStream aMemStr = new System.IO.MemoryStream(); System.Xml.XmlTextWriter writer = new System.Xml.XmlTextWriter(aMemStr, null); serializer.WriteObject(writer, obj); strXml = System.Text.Encoding.UTF8.GetString(aMemStr.ToArray()); return strXml; }   I tried to debug and searched Google for similar problems, but didn't find explanation of the error. The most closed http://forums.codeguru.com/showthread.php?309479-MemoryStream-allocates-size-multiple-of-1024-( talking about incorrect length, but not about truncated string.fortunately replacing MemoryStream to StringWriter according to http://billrob.com/archive/2010/02/09/datacontractserializer-converting-objects-to-xml-string.aspxfixed the issue.   1: var serializer = new DataContractSerializer(tempData.GetType());   2: using (var backing = new System.IO.StringWriter())   3: using (var writer = new System.Xml.XmlTextWriter(backing))   4: {   5:     serializer.WriteObject(writer, tempData);   6:     data.XmlData = backing.ToString();   7: }v

  Read the article

• Payroll Customers Must Apply Mandatory Patches to Maintain Your Supportability

  - by DanaD

  The HRMS Suite of products has minimum required Rollup Patch (RUP) levels as well as additional mandatory patches that our customers must apply to ensure they are in compliance for support.  Without these patches, customers risk not being able to apply any fixes for issues they encounter as these RUPs and mandatory patches are the minimum patch level expected by Oracle Support and Oracle Development.  Core Payroll and International Payroll customers must apply the yearly Rollup Patch within 12 months of its issue. Legislative Payroll customers have additional requirements for the Rollup Patch, as the RUP generally is a pre-requisite for the next Year End/Fourth Quarter/Year Begin payroll processing supported by Oracle. These minimum RUP patches and other mandatory patches for your product or legislation are created with the following goals in mind: Compliance: Manage the people in your organization within the requirements of a specific country. Supportability: Ensure you are on a common code base so that if problems are identified, patches can be readily provided to you. Reliability: Reliable code with multiple customer downloads and comprehensive testing. For the listing of Mandatory Rollup Patches for Oracle Payroll please view: Doc ID 295406.1: Mandatory Family Pack/Rollup Patch (RUP) Levels for Oracle Payroll. For the listing of Mandatory Patches for the HRMS Suite please view: Doc ID 1160507.1: Oracle E-Business Suite HCM Information Center – Consolidated HRMS Mandatory Patch List. For information on the latest Rollup Patches (RUPs) for the HRMS Suite please view: Doc ID 135266.1: Oracle HRMS Product Family – Release 11i & 12 Information.

  Read the article

• Connecting to SQL Server on Parallels Desktop with PHP

  - by Zen Savona

  well I recently bought a Mac and am using it as my primary computer. Because I am required to work with MSSQL via PHP, I have installed Parallels Desktop and run Server 2008 R2 on it. I am using the same mixed mode authentication which I previously had on windows. When I attempt to connect to the server with PHP using either a new test file or my old code, it just doesn't find the server. I have tried running PHP on the XP install with parallels, and using the hostname as COMPUTERNAME\SQLEXPRESS, LOCALIP\SQLEXPRESS localhost localip etc, PHP never finds the server. Also note that I can connect to the database server using Management Studio without problems, so SQL Server is running. Please note that both PHP and MSSQL are running within the virtualised environment. Any contribution is appreciated

  Read the article

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• links for 2010-06-15

  - by Bob Rhubart

  You're invited : Oracle Solaris Day, June 28th, Herzliya - Openomics How open innovation and technology adoption translates to business value, with stories from our developer support work at Sun ISV Engineering (tags: ping.fm) Edwin Biemond: Enriching and Forwarding your data with the Spring Component in SOA Suite 11g PS2 Oracle ACE Edwin Biemond describes "how easy it is to use Java in the Spring Component, how you can wire this Component to other Components, Services or References adapters." (tags: oracleace soa oracle middleware) Venkatakrishnan J: Oracle BI EE 10.1.3.4.1 - Currency Conversions & FX Translations &ndash; Part 1 "As part of the BI EE setup we need to ensure that such local currency transactions are converted to a common reporting currency," says Rittman Mead's Venkatakrishnan. (tags: oracle businessintelligence) Richard Veryard: Ecosystem SOA 2 "What are the problems of large complex sociotechnical systems?" asks Rich Veryard?  "How far do SOA and enterprise architecture help to address this problem space, and what else might we need?" (tags: soa entarch) Khanderao Kand: Oracle BPM Suite .. unified engine.. "This Suite is based on unified process foundation of Oracle Business Process Management Suite 11g . It has the same engine that executes both BPEL and BPMN processes, " says Kand.  (tags: bpel soa bpm oracle) Webcast: Revealing the Secrets that will Re-Energize your Services Strategies  Oracle's Peter Heller and Robert Covington discuss how to overcome the many unforeseen technical and organizational barriers in order to meet the high expectations of dynamic business requirements in this live webcast, July 14, 2010, 9:00 AM PDT / Noon EDT (tags: entarch oracle webcast)

  Read the article

• Windows XP not able to boot after loading isapnp.sys driver

  - by pragadheesh

  Hi When i power on my DELL Latitude E6400 laptop running on Windows XP SP3, i get a black screen and hangs after that. So I tried to boot through safe mode which hangs after loading the driver isapnp.sys. Doing a bit of googling i found out Windows XP not booting up including safe mode So I loaded my XP boot cd and tried Recovery Console. In the Recovery console, doing "dir" gives the error "an error occurred during directory enumeration". Then i tried chkdsk /p /r which gave "the volume appears to contain one or more unrecoverable problems" How can i fix these please. Thanks in advance.

  Read the article

• NoSQL

  - by NoReasoning

  Last night, (Tuesday, June 28), at the KC .NET User group meeting, George Westwater gave a terrific presentation on NoSQL. The best way to define it (the best way is to see George explain it, and he says he will record his presentation and make it available through his blog – link above)  is databases  that does not use relational technology. And his point, and this is true – I have been around awhile – is that non-relational databases have been used for over 50 years in the business. He points out that Wall Street firms have been using non-relational technology ever since they started using computers. IBM still fully supports IMS, now in version 11 (12 is in beta), because these firms are still using this product and will continue to do so for a long time. Of course, like a lot of computer business technology, there are a lot of new NoSQL products available these days, simply as a reaction to the problems of scaling relational databases for internet use. As a result, it almost looks as though NoSQL is something new. And there are a lot, I mean a LOT, I mean a L-O-T , of new products out there for this technology. The best resource to cover all of these products is http://nosql-database.org/, which has a huge listing of what is available. My interest in the subject is primarily due to my interest in Windows Azure and the fact that Windows Azure storage is all non-relational, even the table storage. It is very fascinating and most of all, far cheaper than using SQL Azure for storage in the “cloud."

  Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >