Search Results

Search found 10756 results on 431 pages for 'zend controller'.

Page 296/431 | < Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• Windows Server 2008 constantly spamming external IP's on outbound TCP port 445

  - by RSXAdmin

  Hi Server Fault, I have a Windows Server 2008 box running as a Domain Controller. I have noticed in my Cisco ASA firewall logs that this box is continuously sending out (like a thousand requests a second) requests on TCP port 445 to external hosts. I have made an effort to deny this outbound traffic from getting on the internet (using the ASA), however I would like these requests to stop from even occurring at all. I have tried disabling TCP/IP over NetBIOS. I have even turned on Windows Advanced Firewall on the box itself to block outbound 445 but the ASA still detects this particular traffic hitting it. I have other DC's and similar type boxes which are not behaving the same way as this box. Is this normal? Is there a way to stop this spamming? Have I been infected? Thank you universe.

  Read the article

• Active Directory: Find out which users belong to a Group Policy Object

  - by gentlesea

  Hi, I want to make sure that certain users are available in a group from the windows domain. I installed "Group Policy Management" and can open the Forest, the Domain. But then I am not sure what I am searching. I can select a link to a Group Policy Object (GPO). In Settings i see the Drive Maps and I know them. But how can I display a list of users that use this GPO? Right-click, Edit... is disabled. net group my_gpo does not work since I am not on a Windows Domain Controller. Any possibility to find out anyway?

  Read the article

• How to move an existing Win7 setup to a RAID-1 array?

  - by Matthew Scharley

  Currently I have a the following setup: Drive A/B: Identical HDD's Drive C: 2TB external drive with plenty of space currently. Hardware RAID controller Currently I have Drive A which is my boot drive (Win7), and Drive C which is a data drive, and Drive B which I only recently received and is blank. What is the best way of moving off of Drive A, setting up the hardware RAID and then migrating my data back onto the RAID array? I'm proficient with Linux, but I'm not sure if I can get away with simply using dd here. There is currently enough free space on Drive C to take 5-6 copies of a disk image of Drive A, so space isn't an issue.

  Read the article

• Samba share doesn't have write permissions

  - by blsub6

  alright, I've got one that should be really simple. I want a wide open smb share for my Windows 7 machine. Everyone should be able to access it, regardless of domain or username or anything. My smb.conf has: security = share guest account = nobody Along with: [DC_Backup] path = /Windows_Backups/DC comment = Backup of Domain Controller force user = nobody guest ok = yes public = yes read only = no I can access it, but I cannot write to it. Windows keeps telling me I "need permission to perform this action" Where do I start?

  Read the article

• How do I put back different SCSI hard drives into their original RAID arrays across different servers?

  - by Edgar

  I have potentially a big mess in my hands: I received today a box with several hard drives that used to be connected to different servers each one of them using an unknown - at least as of right now- RAID configuration. Regretfully, these are not marked and I'm not sure how to go about putting them back into their original servers. Currently I don't have much more information: I don't know what type of array was being used on each instance and I don't have any specifics about the RAID controller originally used on each one of the servers (currently these servers are at a remote location with no easy access). Is there a way to sort through this mess? What would be the consequences of using trial and error to go about it? This might be a very basic question but I don't have much experience dealing with RAID arrays.

  Read the article

• Server 2008 Net Send or Msg?

  - by dannymcc

  Hi Everyone, I have a Windows 2008 server running as a domain controller. The details are as follows: Domain: corp Server Name: oxygen The workstations are all running Windows XP SP3 and have fixed IP addresses. I am trying to use the net send functionality to be able to send simple messages to either individual machines/users and also to all machines. This is so I can send a message to a user to alert them about something, or likewise alert everyone of something such as the server being rebooted. Is this possible using Server 2008? If so, what would the command be? Thanks, Danny

  Read the article

• Bind dns server in Solaris 10 and win xp clients

  - by stevecomptech

  Hi, Added this in zone db file, i am running solaris 10 _ldap._tcp.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.mydomain.com. SRV 0 0 88 dc.mydomain.com. _ldap._tcp.dc._msdcs.mydomain.com. SRV 0 0 389 dc.mydomain.com. _kerberos._tcp.dc._msdcs.mydomain.com. SRV 0 0 88 host.mydomain.com. Now i get this error when i try to join win xp to the domain The query was for the SRV record for _ldap._tcp.dc._msdcs.mydomain.com The following domain controllers were identified by the query: host.mydomain.com Common causes of this error include: Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. Domain controllers registered in DNS are not connected to the network or are not running. What do i need to change in order my win xp join the domain

  Read the article

• ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

  - by Moha

  We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

  Read the article

• Linux IO scheduler on databases with RAID

  - by Raghu

  Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Syncronization inside the same PC

  - by FGO

  Hi, I work in a company without a server and operating in diferent countries. Because of this we work on a virtual office basis and share files through a virtual server called Drop Box. I'm the controller of this virtual server and find it to be incomplete. We work on levels of permission so I invite access to users for 3 possible levels and find sometimes that I need to have a specific folder inside one mother folder to be inside 2 levels. The only way I can find to make my life easier is to automatically syncronize specific folders between diferent mother folders, but I don't know how to do this in windows 7. Can anyone give me a hint? Thanks

  Read the article

• parallel to usb driver windows 7 dot matrix printer

  - by user975234

  I recently built a new Core i5 system with Windows 7 Professional. I had planned to hook up my TVS MSP 250 XL printer using a USB to parallel cable Once I plug the cable in, Windows 7 recognizes it as an IEEE-1284 controller and automatically installs the appropriate driver. However, in the status window it reports the following: "USB Printing Support -- Ready to use" "No Printer Attached -- Ready to use" When I then go ahead and manually add the printer using the "virtual printer port for USB" I can add the printer seemingly without problem. Once finished, it appears in the Devices and Printers panel. Yet, all attempts to print on this printer fail. It appears that simply no data is sent to the printer (either by programs like word or adobe or by attempting to print a test page. Does anybody know how to fix this?

  Read the article

• Users will be kicked out of a network drive (DFS)

  - by user71563

  Hi, In early January 2011, we completely switched to Windows Server 2008 R2 and Windows 7. On our domain controller set up a DFS is that the users as "Z: drive" is displayed. The DFS was it in the same way during our time with Windows Server 2003 R2 and Windows XP. At the time it has always worked without problems. Since Windows 7, we have sometimes the case that when a user accesses to the Z drive, the Explorer will return to the workplace without a user can do. After two to three trials of the Explorer remains in the network drive and the users work. This phenomenon occurs irregularly and you can not restrict exactly why. In the event log at the time no obvious entries are logged. Does anyone know the problem or has had similar experiences? I am grateful for any help. Greetings, sY!v3Rs

  Read the article

• Keyboard not responding during boot

  - by Peri

  My keyboard just stopped responding during boot. So I cannot go to BIOS or select system which I want to start. It is USB keyboard and it was working before. I borrowed PS2 keyboard and it also isn't working during boot. Lately I have been having problems with hard disk. Once every 2-5 minutes LED was on for 30 seconds and win7 wasn't responsive. I connected disk to another controller on motherboard and seems it is working now. All that suggests that to me that that motherboard is broken. What can I check? Or maybe you have some other suggestions?

  Read the article

• Windows Server 2008 R2 - Can't connect RDP over the Internet

  - by Jonathan DeMarks

  I have two networks: Domain and Public, Domain is a VPN connection and Public is the local connection to the network. This is not a domain controller or a DNS/DHCP server. I can connect via RDP from the local network (192.168.1.), from the VPN network (10.1.2.), and from the VPN network over the internet. I cannot connect from the internet (anywhere besides where the server is VPN'd) Wireshark indicates that the server is getting packets, and the audit log is indicating that the packets are being dropped. Advanced Firewall has explicit options to allow RDP, and has no deny policies. I have also tried turning Firewall off completely to no avail. I'm really lost on this one.

  Read the article

• some questions about raid card

  - by cpps

  I have some questions about raid card. Use LSI MegaRAID® SAS 9260-8i raid card as a example. There is only two connection ports on the raid card, and they provide two cables that can connect 8 SAS/SATA storages. The document say it can connect "Maximum 32 drives per controller", I want to know how can I connect more than 8 hard disks with this card. Is that they say "Eight internal SATA+SAS ports" means they provide two cables which can connect 8 hard drives, but you can use other way to connect Maximum 32 drives? The other question. I see host bus adapter has raid integrated , so what is the difference between host bus adapter and raid card. Are they the same? I also know is SAS/SATA Expander's function only to connect more hard drives? Thanks in advance.

  Read the article

• Throwing TRIM support in Ubuntu guest at Win7-Virtualbox host

  - by user141472

  I have VirtualBox 4.1.14 on Windows 7 as host, and Ubuntu server 11.10 as guest. System was installed at traditional HDD years ago (and upgraded later), but now it's at SSD as expanding drive. There is "AHCI" and "it's SSD" features enabled in SATA controller. Problem is, this expanding drive growth to it's almost max size (90% of it), but actually in VM only about 50% spent. Also, guest VM does not recognize /dev/sda as SSD, /sys/block/sda/queue/rotational says "1", /sys/block/sda/queue/discard_* all says "0". And, of course, I cannot run fstrim /, it says that operation not supported. Is there some trick to enable TRIM support in my guest system without reinstalling it?

  Read the article

• Does Windows Home Server support folder redirection?

  - by Shawn Miller

  Windows provides the ability to redirect specific user folders to server locations, using a group policy extension called Folder Redirection. The Wikipedia article and Microsoft's marketing page for Windows Home Server suggests a tons of great features, but I don't see anything about specifically about Folder Redirection. I currently run a domain controller in the home so that I can push the folder redirection group policy down to all PCs. Windows Home Server looks like a better fit, but I'd hate to give up on the ease of folder redirection to automatically save all documents, music, pictures to the file server. Any thoughts?

  Read the article

• Find out what resource is triggering bad password attempt?

  - by Craig Tataryn

  Background: Have a problem at work where I am constantly being locked out of my computer. We are in an environment that has a Domain Controller and we use Active Directory for authentication. By going through my normal workflow while on the phone with Desktop Support we were able to track the bad password attempts that were causing the lockouts to an application: "Eclipse". This is the application I use to do software development. I immediately thought it was a cached password for our SVN server that's the culprit, however the desktop support person couldn't tell me which resource the password attempt was being made against (i.e. which URL for instance). Question: Is there a way that I can monitor bad authentication requests made by an application on my desktop and find out what resource they are attempting it against?

  Read the article

• After a period of time, nslookup still works, but pinging, and an auto-refeshed website, fails.

  - by Mark Hurd

  Contrary to this SO question this is for a dotted name (gw.localnet.au), and it doesn't happen straight away. Only after some period of time (quite a long time, possibly days). In fact this is for my ADSL router and its internal IP address which I have named within the router itself and in my Windows Server 2003 Domain Controller DNS Service. Specifically, localnet.au is a Active-Directory-backed primary domain. In fact, an ipconfig /flushdns may fix the problem, but only after a while (about the time it took me to type in this question :-) ). That doesn't explain the root cause though... Manually transferred from stackoverflow.com

  Read the article

• RAID 1 after install and two controlers

  - by jfreak53

  I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

  Read the article

• Cannot fix induced 0x7b error on XP

  - by Malfist

  I'm writing a tool that will automagically fix the STOP 0x7B error that occurs when windows cannot access the hard drive due to driver issues (usually). I've wrote a tool that does everything the Knowledge Base article says to do. But it's not working. I'm inducing the issue by changing the bios SATA controller to AHCI, then moving it to another computer and updating it's registry. When I move it back to the other computer, nothing new happens. Can someone tell me what more I need to do?

  Read the article

• 5 x 3GB drives and 4 x 1500GB drive best raid setup?

  - by Zen_Silence

  Hello, I am building a file server my plan is the have the Operating system on one raid partition and the data storage on another partition. I currently have 5 x 3GB IDE drives that i would like to put the operating system on theses drives are old but that doesnt matter to me at the moment i have a ton of them so for this raid partition i would probably want to be able to pull out dead a drive and rebuild the array. My file partition is going to consist of 4 x 1.5TB SATA drives I would like the maximum storage with some redundancy. Any suggestions to which Raid level i should use would be greatly appreciated and if you could also suggest a PCI or PCI-e raid controller to handle theses arrays. Thanks in Advance, Zen_Silence

  Read the article

• spontaneous hard disk password

  - by sc

  I had an HP proliant server go down recently. All of the sudden the sas controller (e200i) would not see any of the physical disks. New disks were detected just fine. I thought it was odd that all 6 disks would go down at one time so sent them to a data recovery firm to find out what happened. I'm being told that, somehow, all of the disks were spontaneously password protected. These are Hitachi 2.5" drives and I guess this is something of a known issue. The company has worked for a while to try and recover them, with no luck. Has anyone had experience with this? Any recommendations for how to recover the drives or a company that might have the expertise to do so?

  Read the article

< Previous Page | 292 293 294 295 296 297 298 299 300 301 302 303  | Next Page >