Search Results

Search found 54073 results on 2163 pages for 'device instance id'.

Page 297/2163 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

  • Adding Extra Hard Drives Debian Fdisk

    - by Belgin Fish
    well I just got a new server and it's a little different than what I'm use to, when I run cfdisk I get WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdf'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdf: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdf1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sde: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sde1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Usually it tells me which ones arn't partitioned and stuff, and I only have 6 drives in my server and there's 6 showing up here so I'm only assuming the first ones already mounted and formatted correctly? I'm not really sure if anyone would help me out here. Basically I just want to format and mount these drives :)

    Read the article

  • Email from my new vps is marked as spam

    - by Chriswede
    I got a new vps from x10vps (x10hosting) and set up the domain via cloudflare. This is what the email looks like: Delivered-To: [email protected] Received: by 10.64.19.240 with SMTP id i16csp357708iee; Tue, 9 Oct 2012 01:29:48 -0700 (PDT) Received: by 10.50.57.130 with SMTP id i2mr908846igq.56.1349771387599; Tue, 09 Oct 2012 01:29:47 -0700 (PDT) Return-Path: <[email protected]> Received: from power.SOURCEAPE.COM ([198.91.90.116]) by mx.google.com with ESMTPS id v8si25630942ica.46.2012.10.09.01.29.46 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 09 Oct 2012 01:29:47 -0700 (PDT) Received-SPF: temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) client-ip=198.91.90.116; Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) [email protected] Received: from nk11p03mm-asmtp010.mac.com ([17.158.232.169]:54276) by power.SOURCEAPE.COM with esmtp (Exim 4.80) (envelope-from <[email protected]>) id 1TLVBD-0004Ig-1Y for [email protected]; Tue, 09 Oct 2012 12:28:43 +0400 I then tried to enable SPF and DKIM and got following massage In order to ensure that SPF or DKIM takes effect, you must confirm that this server is an authoritative nameserver for chvw.de. If you need help, contact your hosting provider. Status: Enabled Warning: cPanel is unable to verify that this server is an authoritative nameserver for chvw.de. [?] and the email header now looks like this: Delivered-To: [email protected] Received: by 10.50.183.227 with SMTP id ep3csp14506igc; Tue, 9 Oct 2012 01:55:23 -0700 (PDT) Received: by 10.50.40.133 with SMTP id x5mr992934igk.32.1349772923717; Tue, 09 Oct 2012 01:55:23 -0700 (PDT) Return-Path: <[email protected]> Received: from power.SOURCEAPE.COM ([198.91.90.116]) by mx.google.com with ESMTPS id ng8si25688859icb.42.2012.10.09.01.55.23 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 09 Oct 2012 01:55:23 -0700 (PDT) Received-SPF: temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) client-ip=198.91.90.116; Authentication-Results: mx.google.com; spf=temperror (google.com: error in processing during lookup of [email protected]: DNS timeout) [email protected]; dkim=neutral (bad format) [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=chvw.de; s=default; h=Message-ID:Subject:To:From:Date:Content-Transfer-Encoding:Content-Type:MIME-Version; bh=iugsx3Lx0KnqjR7dj3wyQHnJ9pe/z3ntYEVk80k8rx4=; b=IrYsCtHdoPubXVOvLqxd7sLE/TyQTS5P3OrEg5SSUSKnQQcQ/fWWyBrmsrgkFSsw6jCmmRWMDR09vH5bQRpFPMA57B7pf8QRKhwXOWFBV+GnVUqICsfRjnNPvhx/lNp5; Received: from localhost ([127.0.0.1]:46539 helo=direct.chvw.de) by power.SOURCEAPE.COM with esmtpa (Exim 4.80) (envelope-from <[email protected]>) id 1TLVb0-0004dZ-Kd for [email protected]; Tue, 09 Oct 2012 12:55:22 +0400

    Read the article

  • How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

    - by cagenut
    Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

    Read the article

  • Exchange 2003 mail non-delivery (NDR), spam activity? events 7002 & 7004

    - by HighTechGeek
    Windows Server 2003 Small Business Server SP2 Exchange Version 6.5 (Build 7638.2: Service Pack 2) This network has been neglected and has been having email problems for years and was on many blacklists. I was called in after the server eventually crashed... I got the server back up and running, but email problems persist. Outgoing mail delivery is sporadic. Sometimes the mail goes through, sometimes a delayed delivery report is generated after a day or more, and sometimes it seems to go through, but the recipient never receives it. Not sure if spammers are successfully using the server as a relay (see event entries below after turning on maximum SMTP logging)... User PCs infected with viruses and server was blacklisted on many sites (I used mxtoolbox.com) I have cleaned all the PCs and changed all passwords (including administrator) I have requested removal from all of the blacklists - most have removed the listing, some take more time. I have setup rDNS pointer records with the ISP (Comcast) - that was one reason for some of the blacklistings. I have tested that it's not an open relay using telnet as described here: www.amset.info/exchange/smtp-openrelay.asp I followed the advise of a Spamhaus & Microsoft article to enable maximum SMTP logging. http://www.spamhaus.org/faq/answers.lasso?section=isp%20spam%20issues#320 which directed me to Microsoft KB article 895853, specifically, the part 2/3 down titled: "If mail relay occurs from an account on an Exchange computer that is not configured as an open relay" . The Application Event Log is filling with this type of activity (Event ID 7002, 7002 & 3018 errors): Event Type: Error Event Source: MSExchangeTransport Event Category: SMTP Protocol Event ID: 7004 Date: 1/18/2011 Time: 7:33:29 AM User: N/A Computer: SERVER Description: This is an SMTP protocol error log for virtual server ID 1, connection #621. The remote host "212.52.84.180", responded to the SMTP command "rcpt" with "550 #5.1.0 Address rejected [email protected] ". The full command sent was "RCPT TO: ". This will probably cause the connection to fail. and this: Event Type: Warning Event Source: MSExchangeTransport Event Category: SMTP Protocol Event ID: 7002 Date: 1/18/2011 Time: 7:33:29 AM User: N/A Computer: SERVER Description: This is an SMTP protocol warning log for virtual server ID 1, connection #620. The remote host "212.52.84.170", responded to the SMTP command "rcpt" with "452 Too many recipients received this hour ". The full command sent was "RCPT TO: ". This may cause the connection to fail. or a variant of: Event Type: Warning Event Source: MSExchangeTransport Event Category: SMTP Protocol Event ID: 7002 Date: 1/18/2011 Time: 8:39:21 AM User: N/A Computer: SERVER Description: This is an SMTP protocol warning log for virtual server ID 1, connection #661. The remote host "82.57.200.133", responded to the SMTP command "rcpt" with "421 Service not available - too busy ". The full command sent was "RCPT TO: ". This may cause the connection to fail. also Event Type: Error Event Source: MSExchangeTransport Event Category: NDR Event ID: 3018 Date: 1/18/2011 Time: 9:49:37 AM User: N/A Computer: SERVER Description: A non-delivery report with a status code of 5.4.0 was generated for recipient rfc822;[email protected] (Message-ID ). Causes: This message indicates a DNS problem or an IP address configuration problem Solution: Check the DNS using nslookup or dnsq. Verify the IP address is in IPv4 literal format. Data: 0000: ef 02 04 c0 ï..À Any guidance and/or suggestions and/or tests to perform would be greatly appreciated.

    Read the article

  • ActiveDirectoryMembershipProvider and ADAM (or AD LDS) and SetPassword

    - by Iulian
    By the subject line it seems to be a rather broad subject and I need some help here. Basically what I want is to use ActiveDirectoryMembershipProvider with an ADAM instance to authenticate users in an ASP.NET web application. My development environment is a windows 7 machine with an AD LDS instance on it whilst the QA server is a Windows 2003 server with an ADAM instance on it. I have all the required users on both instances plus one with adminsitrator role (CN=Admin,CN=xxx,DC=xxx,C=xx) which I want to use as the connection user. Using connectonProtecton="None" connectionUsername="CN=Admin,CN=xxx,DC=xxx,C=xx" connectionPassword="xxx" I am able to authenticate on both environments (dev & qa). If I change to the connectionProtection to "Secure" I am not able to authenticate anymore; the error I get is "Parser Error Message: Unable to establish secure connection with the server" To me it sounds wrong to use connectionProtection="None" although I found on the net a lot of samples using this setting. Can I use connectionProtection="Secure" to connect to an ADAM instance using an account defined on that instance having Administrator role? What other choices do I have (like using an domain account)? What if my machine where I am to deploy the application is not a part of the domain, will this affect in any way the behavior? I am novice in the respect so I would really appreciate some clear answers or some directions as where to look? Now beside the "signing in" feature of the ActiveDirectoryMembershipProvider I also want to add an extra one, which is setting the password without knowing the old one (something that will be used by a "reset password" feature). So I added a couple of extension methods to the provider, and used System.DirectoryServices classes like DirectoryEntry and the like. When creating a directory entry I use the same credentials provided in web.config for the provider minus the AuthenticationType as I don't know what is right combination of the flags that corresponds to None/Secure. I am able to use Invoke "SetPassword" with ADS_OPTION_PASSWORD_METHOD option as ADS_PASSWORD_ENCODE_CLEAR on my dev machine (w/ AD LDS instance); nevertheless on qa environment (w/ ADAM instance) I am getting an error like "Exception Details: System.DirectoryServices.DirectoryServicesCOMException: An operations error occurred. (Exception from HRESULT: 0x80072020)" I am quite sure it is not about AD LDS vs ADAM but probably another configuration / permission issue. So can anyone help me with some hints on how to use this SetPassword feature? And as a general question what are the best practices when it comes to using ADAM regarding security, programming etc? Thanks in advance Iulian

    Read the article

  • Resgen al.exe generated resources do not work within .net library

    - by Raj G
    Hi, I am currently working on a library in .Net and I planned to make the strings that are used within the library into culture specific resource files. I made Resources.resx, Resources.en-US.resx and Resources.ja-JP.resx file. I also deleted the Resources.designer.cs file autogenerated by visual studio 2008. I am loading Resources through my custom ResourceManager object [using GetString method]. The problem that I am facing is that when I compile the library within visual studio and set the culture from the calling application, everything is working fine. But if I manually go to the directory and change a string for a culture and regenerate the satellite assembly with resgen and al.exe, the string displayed, falls back to the invariant culture. I have attached the ildasm view of both the dlls en-US generated from within visual studio //Metadata version: v2.0.50727 .assembly extern mscorlib { .publickeytoken = (B7 7A 5C 56 19 34 E0 89 ) // .z\V.4.. .hash = (71 05 4D 54 C4 8D C2 90 7D 8B CF 57 2E B5 98 22 // q.MT....}..W..." F5 5B 2E 06 ) // .[.. .ver 2:0:0:0 } .assembly EmailEngine.resources { .custom instance void [mscorlib]System.Reflection.AssemblyTitleAttribute::.ctor(string) = ( 01 00 0B 45 6D 61 69 6C 45 6E 67 69 6E 65 00 00 ) // ...EmailEngine.. .custom instance void [mscorlib]System.Reflection.AssemblyDescriptionAttribute::.ctor(string) = ( 01 00 FF 00 00 ) .custom instance void [mscorlib]System.Reflection.AssemblyCompanyAttribute::.ctor(string) = ( 01 00 FF 00 00 ) .custom instance void [mscorlib]System.Reflection.AssemblyProductAttribute::.ctor(string) = ( 01 00 0B 45 6D 61 69 6C 45 6E 67 69 6E 65 00 00 ) // ...EmailEngine.. .custom instance void [mscorlib]System.Reflection.AssemblyCopyrightAttribute::.ctor(string) = ( 01 00 12 43 6F 70 79 72 69 67 68 74 20 C2 A9 20 // ...Copyright .. 20 32 30 30 38 00 00 ) // 2008.. .custom instance void [mscorlib]System.Reflection.AssemblyTrademarkAttribute::.ctor(string) = ( 01 00 FF 00 00 ) .custom instance void [mscorlib]System.Reflection.AssemblyFileVersionAttribute::.ctor(string) = ( 01 00 07 31 2E 30 2E 30 2E 30 00 00 ) // ...1.0.0.0.. .hash algorithm 0x00008004 .ver 1:0:0:0 .locale = (65 00 6E 00 2D 00 55 00 53 00 00 00 ) // e.n.-.U.S... } .mresource public 'EmailEngine.Properties.Resources.en-US.resources' { // Offset: 0x00000000 Length: 0x00000111 } .module EmailEngine.resources.dll // MVID: {D030D620-4E59-46F4-94F4-5EA0F9554E67} .imagebase 0x00400000 .file alignment 0x00000200 .stackreserve 0x00100000 .subsystem 0x0003 // WINDOWS_CUI .corflags 0x00000001 // ILONLY // Image base: 0x008B0000 ja-JP generated by me using resgen and al.exe // Metadata version: v2.0.50727 .assembly EmailEngine.resources { .hash algorithm 0x00008004 .ver 0:0:0:0 .locale = (6A 00 61 00 00 00 ) // j.a... } .mresource public 'EmailEngine.Properties.Resources.ja-JP.resources' { // Offset: 0x00000000 Length: 0x0000012F } .module EmailEngine.resources.dll // MVID: {0F470BCD-C36D-4B9F-A8ED-205A0E5A9F6F} .imagebase 0x00400000 .file alignment 0x00000200 .stackreserve 0x00100000 .subsystem 0x0003 // WINDOWS_CUI .corflags 0x00000001 // ILONLY // Image base: 0x007F0000 Can anyone help me as to why these two files are different and what is going on here? Why would the same Japanese resource file work when generated from within visual studio and not when generated using tools. TIA Raj

    Read the article

  • Odd behavior in Django Form (readonly field/widget)

    - by jamida
    I'm having a problem with a test app I'm writing to verify some Django functionality. The test app is a small "grade book" application that is currently using Alex Gaynor's readonly field functionality http://lazypython.blogspot.com/2008/12/building-read-only-field-in-django.html There are 2 problems which may be related. First, when I flop the comment on these 2 lines below: # myform = GradeForm(data=request.POST, instance=mygrade) myform = GradeROForm(data=request.POST, instance=mygrade) it works like I expect, except of course that the student field is changeable. When the comments are the shown way, the "studentId" field is displayed as a number (not the name, problem 1) and when I hit submit I get an error saying that studentId needs to be a Student instance. I'm at a loss as to how to fix this. I'm not wedded to Alex Gaynor's code. ANY code will work. I'm relatively new to both Python and Django, so the hints I've seen on websites that say "making a read-only field is easy" are still beyond me. // models.py class Student(models.Model): name = models.CharField(max_length=50) parent = models.CharField(max_length=50) def __unicode__(self): return self.name class Grade(models.Model): studentId = models.ForeignKey(Student) finalGrade = models.CharField(max_length=3) # testbed.grades.readonly is alex gaynor's code from testbed.grades.readonly import ReadOnlyField class GradeROForm(ModelForm): studentId = ReadOnlyField() class Meta: model=Grade class GradeForm(ModelForm): class Meta: model=Grade // views.py def modifyGrade(request,student): student = Student.objects.get(name=student) mygrade = Grade.objects.get(studentId=student) if request.method == "POST": # myform = GradeForm(data=request.POST, instance=mygrade) myform = GradeROForm(data=request.POST, instance=mygrade) if myform.is_valid(): grade = myform.save() info = "successfully updated %s" % grade.studentId else: # myform=GradeForm(instance=mygrade) myform=GradeROForm(instance=mygrade) return render_to_response('grades/modifyGrade.html',locals()) // template <p>{{ info }}</p> <form method="POST" action=""> <table> {{ myform.as_table }} </table> <input type="submit" value="Submit"> </form> // Alex Gaynor's code from django import forms from django.utils.html import escape from django.utils.safestring import mark_safe from django.forms.util import flatatt class ReadOnlyWidget(forms.Widget): def render(self, name, value, attrs): final_attrs = self.build_attrs(attrs, name=name) if hasattr(self, 'initial'): value = self.initial return mark_safe("<span %s>%s</span>" % (flatatt(final_attrs), escape(value) or '')) def _has_changed(self, initial, data): return False class ReadOnlyField(forms.FileField): widget = ReadOnlyWidget def __init__(self, widget=None, label=None, initial=None, help_text=None): forms.Field.__init__(self, label=label, initial=initial, help_text=help_text, widget=widget) def clean(self, value, initial): self.widget.initial = initial return initial

    Read the article

  • Hibernate + Spring : cascade deletion ignoring non-nullable constraints

    - by E.Benoît
    Hello, I seem to be having one weird problem with some Hibernate data classes. In a very specific case, deleting an object should fail due to existing, non-nullable relations - however it does not. The strangest part is that a few other classes related to the same definition behave appropriately. I'm using HSQLDB 1.8.0.10, Hibernate 3.5.0 (final) and Spring 3.0.2. The Hibernate properties are set so that batch updates are disabled. The class whose instances are being deleted is: @Entity( name = "users.Credentials" ) @Table( name = "credentials" , schema = "users" ) public class Credentials extends ModelBase { private static final long serialVersionUID = 1L; /* Some basic fields here */ /** Administrator credentials, if any */ @OneToOne( mappedBy = "credentials" , fetch = FetchType.LAZY ) public AdminCredentials adminCredentials; /** Active account data */ @OneToOne( mappedBy = "credentials" , fetch = FetchType.LAZY ) public Account activeAccount; /* Some more reverse relations here */ } (ModelBase is a class that simply declares a Long field named "id" as being automatically generated) The Account class, which is one for which constraints work, looks like this: @Entity( name = "users.Account" ) @Table( name = "accounts" , schema = "users" ) public class Account extends ModelBase { private static final long serialVersionUID = 1L; /** Credentials the account is linked to */ @OneToOne( optional = false ) @JoinColumn( name = "credentials_id" , referencedColumnName = "id" , nullable = false , updatable = false ) public Credentials credentials; /* Some more fields here */ } And here is the AdminCredentials class, for which the constraints are ignored. @Entity( name = "admin.Credentials" ) @Table( name = "admin_credentials" , schema = "admin" ) public class AdminCredentials extends ModelBase { private static final long serialVersionUID = 1L; /** Credentials linked with an administrative account */ @OneToOne( optional = false ) @JoinColumn( name = "credentials_id" , referencedColumnName = "id" , nullable = false , updatable = false ) public Credentials credentials; /* Some more fields here */ } The code that attempts to delete the Credentials instances is: try { if ( account.validationKey != null ) { this.hTemplate.delete( account.validationKey ); } this.hTemplate.delete( account.languageSetting ); this.hTemplate.delete( account ); } catch ( DataIntegrityViolationException e ) { return false; } Where hTemplate is a HibernateTemplate instance provided by Spring, its flush mode having been set to EAGER. In the conditions shown above, the deletion will fail if there is an Account instance that refers to the Credentials instance being deleted, which is the expected behaviour. However, an AdminCredentials instance will be ignored, the deletion will succeed, leaving an invalid AdminCredentials instance behind (trying to refresh that instance causes an error because the Credentials instance no longer exists). I have tried moving the AdminCredentials table from the admin DB schema to the users DB schema. Strangely enough, a deletion-related error is then triggered, but not in the deletion code - it is triggered at the next query involving the table, seemingly ignoring the flush mode setting. I've been trying to understand this for hours and I must admit I'm just as clueless now as I was then.

    Read the article

  • When is ¦ not equal to ¦?

    - by Trey Jackson
    Background. I'm working with netlists, and in general, people specify different hierarchies by using /. However, it's not illegal to actually use a / as a part of an instance name. For example, X1/X2/X3/X4 might refer to instance X4 inside another instance named X1/X2/X3. Or it might refer an instance named X3/X4 inside an instance named X2 inside an instance named X1. Got it? There's really no "regular" character that cannot be used as a part of an instance name, so you resort to a non-printable one, or ... perhaps one outside of the standard 0..127 ASCII chars. I thought I'd try (decimal) 166, because for me it shows up as the pipe: ¦. So... I've got some C++ code which constructs the path name using ¦ as the hierarchical separator, so the path above looks like X1¦X2/X3¦X4. Now the GUI is written in Tcl/Tk, and to properly translate this into human readable terms I need to do something like the following: set path [getPathFromC++] ;# returns X1¦X2/X3¦X4 set humanreadable [join [split $path ¦] /] Basically, replace the ¦ with / (I could also accomplish this with [string map]). Now, the problem is, the ¦ in the string I get from C++ doesn't match the ¦ I can create in Tcl. i.e. This fails: set path [getPathFromC++] ;# returns X1¦X2/X3¦X4 string match $path [format X1%cX2/X3%cX4 166 166] Visually, the two strings look identical, but string match fails. I even tried using scan to see if I'd mixed up the bit values. But set path [getPathFromC++] ;# returns X1¦X2/X3¦X4 set path2 [format X1%cX2/X3%cX4 166 166] for {set i 0} {$i < [string length $path]} {incr i} { set p [string range $path $i $i] set p2 [string range $path2 $i $i] scan %c $p c scan %c $p2 c2 puts [list $p $c :::: $p2 $c2 equal? [string equal $c $c2]] } Produces output which looks like everything should match, except the [string equal] fails for the ¦ characters with a print line: ¦ 166 :::: ¦ 166 equal? 0 For what it's worth, the character in C++ is defined as: const char SEPARATOR = 166; Any ideas why a character outside the regular ASCII range would fail like this? When I changed the separator to (decimal) 28 (^\), things worked fine. I just don't want to get bit by a similar problem on a different platform. (I'm currently using Redhat Linux).

    Read the article

  • Not seeing Sync Block in Object Layout

    - by bob-bedell
    It's my understanding the all .NET object instances begin with an 8 byte 'object header': a synch block (4 byte pointer into a SynchTableEntry table), and a type handle (4 byte pointer into the types method table). I'm not seeing this in VS 2010 RC's (CLR 4.0) debugger memory windows. Here's a simple class that will generate a 16 byte instance, less the object header. class Program { short myInt = 2; // 4 bytes long myLong = 3; // 8 bytes string myString = "aString"; // 4 byte object reference // 16 byte instance static void Main(string[] args) { new Program(); return; } } An SOS object dump tells me that the total object size is 24 bytes. That makes sense. My 16 byte instance plus an 8 byte object header. !DumpObj 0205b660 Name: Offset_Test.Program MethodTable: 000d383c EEClass: 000d13f8 Size: 24(0x18) bytes File: C:\Users\Bob\Desktop\Offset_Test\Offset_Test\bin\Debug\Offset_Test.exe Fields: MT Field Offset Type VT Attr Value Name 632020fc 4000001 10 System.Int16 1 instance 2 myInt 632050d8 4000002 4 System.Int64 1 instance 3 myLong 631fd2b8 4000003 c System.String 0 instance 0205b678 myString Here's the raw memory: 0x0205B660 000d383c 00000003 00000000 0205b678 00000002 ... And here are some annotations: offset 0 000d383c ;TypeHandle (pointer to MethodTable), 4 bytes offset 4 00000003 00000000 ;myLong, 8 bytes offset 12 0205b678 ;myString, 4 byte reference to address of "myString" on GC Heap offset 16 00000002 ;myInt, 4 bytes My object begins a address 0x0205B660. But I can only account for 20 bytes of it, the type handle and the instance fields. There is no sign of a synch block pointer. The object size is reported as 24 bytes, but the debugger is showing that it only occupies 20 bytes of memory. I'm reading Drill Into .NET Framework Internals to See How the CLR Creates Runtime Objects, and expected the first 4 bytes of my object to be a zeroed synch block pointer, as shown in Figure 8 of that article. Granted, this is an article about CLR 1.1. I'm just wondering if the difference between what I'm seeing and what this early article reports is a change in either the debugger's display of object layout, or in the way the CLR lays out objects in versions later than 1.1. Anyway, can anyone account for my 4 missing bytes?

    Read the article

  • On automating a split-mirror ASM backup with EMC TimeFinder ...

    - by [email protected]
    Normal 0 21 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Hi clerks,   Offloading the backup operation to another host using disk cloning could really improve the performance on highly busy databases ( 24x7, zero downtime and all this stuff ...) There are well know white papers on this subject, ASM included, but today Im showing you a nice way to automate the procedure using shell scripting with EMC TimeFinder technologies:   Assumptions: *********** ASM diskgroups name:   +data_${db_name} : asm data diskgroup +fra_${db_name} :  asm fra  diskgroup   EMC Time Finder sync groups name:   rac_${DB_NAME}_data_tf : data group rac_${DB_NAME}_fra_tf:   fra group     There are two scripts, one located on the production box ( bck_database.sh ) and the other one on the backup server node ( bck_database_mirror.sh ) The second one is remotly executed from the production host There are a bunch of variables along the code with selfexplanatory names I guess, anyway let me know if you want some help     #!/bin/ksh ### ###  Copyright (c) 1988, 2010, Oracle Corporation.  All Rights Reserved. ### ###    NAME ###     bck_database.sh ### ###    DESCRIPTION ###     Database backup on third mirror ### ###    RETURNS ### ###    NOTES ### ###    MODIFIED                                 (DD/MM/YY) ###    Oracle            28/01/10             - Creacion ###   V_DATE=`/bin/date +%Y%m%d_%H%M%S` V_FICH_LOG=`dirname $0`/trace_dir_location/`basename $0`.${V_DATE}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1     ADMIN_DIR=`dirname $0` . ${ADMIN_DIR}/setenv_instance.sh -- This script should set the instance vars like Oracle Home, Sid, db_name ... if [ $? -ne 0 ] then   echo "Error when setting the environment."   exit 1 fi   echo "${V_DATE} ####################################################" echo "Executing database backup: ${DB_NAME}" echo "####################################################################"   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm data diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf establish -noprompt if [ $? -ne 0 ] then   echo "Error when sync asm data diskgroups"   exit 2 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm data disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf -i 30 verify if [ $? -ne 0 ] then   echo "Error when verifying asm data diskgroups"   exit 3 fi     V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Sync asm fra diskgroups ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf establish -noprompt if [ $? -ne 0 ] then   echo "Error when sync asm fra diskgroups"   exit 4 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Verifying asm fra disks ..." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf -i 30 verify if [ $? -ne 0 ] then   echo "Error when verifying asm fra diskgroups"   exit 5 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "ASM sync sucessfully completed!" echo "####################################################################"     V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to BEGIN BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-!   whenever sqlerror exit 1   connect / as sysdba   whenever sqlerror exit   alter system archive log current;   alter database ${DB_NAME} begin backup; ! if [ $? -ne 0 ] then   echo "Error when updating database status to BEGIN backup"   exit 6 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm data disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_data_tf split -noprompt if [ $? -ne 0 ] then   echo "Error when splitting asm data disks"   exit 7 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Updating status ${DB_NAME} to END BACKUP ..." echo "####################################################################" sqlplus -s /nolog <<-!   whenever sqlerror exit 1   connect / as sysdba   whenever sqlerror exit   alter database ${DB_NAME} end backup;   alter system archive log current; ! if [ $? -ne 0 ] then   echo "Error when updating database status to END backup"   exit 8 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Generating controlfile copies...." echo "####################################################################" rman<<-! connect target / run { allocate channel ch1 type DISK; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_mount.ctl'; copy current controlfile to '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl'; } ! if [ $? -ne 0 ] then   echo "Error generating controlfile copies"   exit 9 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Resync RMAN catalog ....." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} resync catalog; ! if [ $? -ne 0 ] then   echo "Error when resyncing RMAN catalog"   exit 10 fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Splitting asm fra disks....." echo "####################################################################" sudo symmir -g rac_${DB_NAME}_fra_tf split -noprompt if [ $? -ne 0 ] then   echo "Error when splitting asm fra disks"   exit 11 fi     echo "WARNING!: Calling bck_database_mirror.sh host ${NODE_BCK_SERVER}..." ssh ${NODO_BCK_SERVER} ${ADMIN_DIR_BCK}/bck_database_mirror.sh if [ $? -ne 0 ] then   echo "Error, when remote executing the backup "   exit 12 fi V_DATE=`/bin/date +%Y%m%d_%H%M%S` echo "${V_DATE} ####################################################" echo "Cleaning the archived redo logs already copied to tape ..." echo "####################################################################" rman<<-! connect target / connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG} run { resync catalog; delete noprompt archivelog all backed up 1 times to device type sbt; } ! if [ $? -ne 0 ] then   echo "Error when cleaning the archived redo logs"   exit 13 fi echo "${V_DATE} ####################################################" echo "Backup sucessfully executed!!" echo "####################################################################" exit 0   ------------------------------------------------------------------------------ ------------------------** BACKUP SERVER NODE ** ----------------------------- ------------------------------------------------------------------------------   #!/bin/ksh ### ###  Copyright (c) 1988, 2010, Oracle Corporation.  All Rights Reserved. ### ###    ###    NAME ###     bck_database_mirror.sh ### ###    DESCRIPTION ###      Backup @ backup server ### ###    RETURNS ### ###    NOTES ### ###    MODIFIED                                 (DD/MM/YY) ###      Oracle                    28/01/10     - Creacion         V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Starting ASM instance ..."   echo "####################################################################"   ${V_ADMIN_DIR}/start_asm.sh -- This script is supposed to start the ASM instance in the backup server   if [ $? -ne 0 ]   then     echo "Error when tying to start ASM instance."     exit 1   fi       . ${V_ADMIN_DIR}/setenv_asm.sh -- This script is supposed to set the env. variables of the ASM instance   if [ $? -ne 0 ]   then     echo "Error when setting the ASM environment"     exit 1   fi       V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "The asm diskgroups/disks dettected are the following ..."   echo "####################################################################"     sqlplus /nolog <<-!     whenever sqlerror exit 1     connect / as sysdba     whenever sqlerror exit     SET LINES 200     COL PATH FORMAT A25     SELECT DISK.MOUNT_STATUS, DISK.PATH, DISK.NAME, DISK_GROUP.NAME, DISK_GROUP.TOTAL_MB FROM V\$ASM_DISK DISK, V\$ASM_DISKGROUP DISK_GROUP WHERE DISK.GROUP_NUMBER=DISK_GROUP.GROUP_NUMBER; !       V_ADMIN_DIR=`dirname $0`   . ${V_ADMIN_DIR}/setenv_instance.sh -- This script is supposed to set the env. variables of the database instance   if [ $? -ne 0 ]   then     echo "Error when setting the database instance environment"     exit 1   fi     V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Starting ${DB_NAME} in MOUNT mode..."   echo "####################################################################"   ${V_ADMIN_DIR}/start_instance_mount.sh -- This script is supposed to do a startup mount   if [ $? -ne 0 ]   then     echo "Error starting  ${DB_NAME} in MOUNT mode"     exit 1   fi   V_DATE=`/bin/date +%Y%m%d_%H%M%S`   echo "${V_DATE} ####################################################"   echo "Executing RMAN backup..."   echo "####################################################################"   rman<<-!   connect target /   connect catalog ${V_RMAN_USR}/${V_RMAN_PWD}@${V_DB_CATALOG}   run {   allocate channel ch1 type 'SBT_TAPE' parms'ENV=(TDPO_OPTFILE=/opt/tivoli/tsm/client/oracle/bin64/tdpo.opt)'; -- TDPO Media Library   crosscheck archivelog all;   backup tag BCK_CONTROLFILE_ST_${DB_NAME}   format 'ctl_%d_%s__%p_%t'   controlfilecopy '+FRA_${DB_NAME}/${DB_NAME}/CONTROLFILE/control_backup.ctl';   backup tag BCK_DATAFILE_ST_${DB_NAME} full   format 'db_%d_%s_%p_%t'database;   backup tag BCK_ARCHLOG_ST_${DB_NAME} format 'al_%d_%s_%p_%t' archivelog all;   release channel ch1;   } !   if [ $? -ne 0 ]   then     echo "Error executing the RMAN backup"     exit 1   fi     ${V_ADMIN_DIR}/stop_instance_immediate.sh -- This script is supposed to do a shutdown immediate of the database instance   ${ADMIN_DIR}/stop_asm_immediate.sh -- This script is supposed to do a shutdown immediate of the ASM instance   exit 0     fi   Hope it helps someone! --L

    Read the article

  • Windows Azure Evolution &ndash; Caching (Preview)

    - by Shaun
    Caching is a popular topic when we are building a high performance and high scalable system not only on top of the cloud platform but the on-premise environment as well. On March 2011 the Windows Azure AppFabric Caching had been production launched. It provides an in-memory, distributed caching service over the cloud. And now, in this June 2012 update, the cache team announce a grand new caching solution on Windows Azure, which is called Windows Azure Caching (Preview). And the original Windows Azure AppFabric Caching was renamed to Windows Azure Shared Caching.   What’s Caching (Preview) If you had been using the Shared Caching you should know that it is constructed by a bunch of cache servers. And when you want to use you should firstly create a cache account from the developer portal and specify the size you want to use, which means how much memory you can use to store your data that wanted to be cached. Then you can add, get and remove them through your code through the cache URL. The Shared Caching is a multi-tenancy system which host all cached items across all users. So you don’t know which server your data was located. This caching mode works well and can take most of the cases. But it has some problems. The first one is the performance. Since the Shared Caching is a multi-tenancy system, which means all cache operations should go through the Shared Caching gateway and then routed to the server which have the data your are looking for. Even though there are some caches in the Shared Caching system it also takes time from your cloud services to the cache service. Secondary, the Shared Caching service works as a block box to the developer. The only thing we know is my cache endpoint, and that’s all. Someone may satisfied since they don’t want to care about anything underlying. But if you need to know more and want more control that’s impossible in the Shared Caching. The last problem would be the price and cost-efficiency. You pay the bill based on how much cache you requested per month. But when we host a web role or worker role, it seldom consumes all of the memory and CPU in the virtual machine (service instance). If using Shared Caching we have to pay for the cache service while waste of some of our memory and CPU locally. Since the issues above Microsoft offered a new caching mode over to us, which is the Caching (Preview). Instead of having a separated cache service, the Caching (Preview) leverage the memory and CPU in our cloud services (web role and worker role) as the cache clusters. Hence the Caching (Preview) runs on the virtual machines which hosted or near our cloud applications. Without any gateway and routing, since it located in the same data center and same racks, it provides really high performance than the Shared Caching. The Caching (Preview) works side-by-side to our application, initialized and worked as a Windows Service running in the virtual machines invoked by the startup tasks from our roles, we could get more information and control to them. And since the Caching (Preview) utilizes the memory and CPU from our existing cloud services, so it’s free. What we need to pay is the original computing price. And the resource on each machines could be used more efficiently.   Enable Caching (Preview) It’s very simple to enable the Caching (Preview) in a cloud service. Let’s create a new windows azure cloud project from Visual Studio and added an ASP.NET Web Role. Then open the role setting and select the Caching page. This is where we enable and configure the Caching (Preview) on a role. To enable the Caching (Preview) just open the “Enable Caching (Preview Release)” check box. And then we need to specify which mode of the caching clusters we want to use. There are two kinds of caching mode, co-located and dedicate. The co-located mode means we use the memory in the instances we run our cloud services (web role or worker role). By using this mode we must specify how many percentage of the memory will be used as the cache. The default value is 30%. So make sure it will not affect the role business execution. The dedicate mode will use all memory in the virtual machine as the cache. In fact it will reserve some for operation system, azure hosting etc.. But it will try to use as much as the available memory to be the cache. As you can see, the Caching (Preview) was defined based on roles, which means all instances of this role will apply the same setting and play as a whole cache pool, and you can consume it by specifying the name of the role, which I will demonstrate later. And in a windows azure project we can have more than one role have the Caching (Preview) enabled. Then we will have more caches. For example, let’s say I have a web role and worker role. The web role I specified 30% co-located caching and the worker role I specified dedicated caching. If I have 3 instances of my web role and 2 instances of my worker role, then I will have two caches. As the figure above, cache 1 was contributed by three web role instances while cache 2 was contributed by 2 worker role instances. Then we can add items into cache 1 and retrieve it from web role code and worker role code. But the items stored in cache 1 cannot be retrieved from cache 2 since they are isolated. Back to our Visual Studio we specify 30% of co-located cache and use the local storage emulator to store the cache cluster runtime status. Then at the bottom we can specify the named caches. Now we just use the default one. Now we had enabled the Caching (Preview) in our web role settings. Next, let’s have a look on how to consume our cache.   Consume Caching (Preview) The Caching (Preview) can only be consumed by the roles in the same cloud services. As I mentioned earlier, a cache contributed by web role can be connected from a worker role if they are in the same cloud service. But you cannot consume a Caching (Preview) from other cloud services. This is different from the Shared Caching. The Shared Caching is opened to all services if it has the connection URL and authentication token. To consume the Caching (Preview) we need to add some references into our project as well as some configuration in the Web.config. NuGet makes our life easy. Right click on our web role project and select “Manage NuGet packages”, and then search the package named “WindowsAzure.Caching”. In the package list install the “Windows Azure Caching Preview”. It will download all necessary references from the NuGet repository and update our Web.config as well. Open the Web.config of our web role and find the “dataCacheClients” node. Under this node we can specify the cache clients we are going to use. For each cache client it will use the role name to identity and find the cache. Since we only have this web role with the Caching (Preview) enabled so I pasted the current role name in the configuration. Then, in the default page I will add some code to show how to use the cache. I will have a textbox on the page where user can input his or her name, then press a button to generate the email address for him/her. And in backend code I will check if this name had been added in cache. If yes I will return the email back immediately. Otherwise, I will sleep the tread for 2 seconds to simulate the latency, then add it into cache and return back to the page. 1: protected void btnGenerate_Click(object sender, EventArgs e) 2: { 3: // check if name is specified 4: var name = txtName.Text; 5: if (string.IsNullOrWhiteSpace(name)) 6: { 7: lblResult.Text = "Error. Please specify name."; 8: return; 9: } 10:  11: bool cached; 12: var sw = new Stopwatch(); 13: sw.Start(); 14:  15: // create the cache factory and cache 16: var factory = new DataCacheFactory(); 17: var cache = factory.GetDefaultCache(); 18:  19: // check if the name specified is in cache 20: var email = cache.Get(name) as string; 21: if (email != null) 22: { 23: cached = true; 24: sw.Stop(); 25: } 26: else 27: { 28: cached = false; 29: // simulate the letancy 30: Thread.Sleep(2000); 31: email = string.Format("{0}@igt.com", name); 32: // add to cache 33: cache.Add(name, email); 34: } 35:  36: sw.Stop(); 37: lblResult.Text = string.Format( 38: "Cached = {0}. Duration: {1}s. {2} => {3}", 39: cached, sw.Elapsed.TotalSeconds.ToString("0.00"), name, email); 40: } The Caching (Preview) can be used on the local emulator so we just F5. The first time I entered my name it will take about 2 seconds to get the email back to me since it was not in the cache. But if we re-enter my name it will be back at once from the cache. Since the Caching (Preview) is distributed across all instances of the role, so we can scaling-out it by scaling-out our web role. Just use 2 instances and tweak some code to show the current instance ID in the page, and have another try. Then we can see the cache can be retrieved even though it was added by another instance.   Consume Caching (Preview) Across Roles As I mentioned, the Caching (Preview) can be consumed by all other roles within the same cloud service. For example, let’s add another web role in our cloud solution and add the same code in its default page. In the Web.config we add the cache client to one enabled in the last role, by specifying its role name here. Then we start the solution locally and go to web role 1, specify the name and let it generate the email to us. Since there’s no cache for this name so it will take about 2 seconds but will save the email into cache. And then we go to web role 2 and specify the same name. Then you can see it retrieve the email saved by the web role 1 and returned back very quickly. Finally then we can upload our application to Windows Azure and test again. Make sure you had changed the cache cluster status storage account to the real azure account.   More Awesome Features As a in-memory distributed caching solution, the Caching (Preview) has some fancy features I would like to highlight here. The first one is the high availability support. This is the first time I have heard that a distributed cache support high availability. In the distributed cache world if a cache cluster was failed, the data it stored will be lost. This behavior was introduced by Memcached and is followed by almost all distributed cache productions. But Caching (Preview) provides high availability, which means you can specify if the named cache will be backup automatically. If yes then the data belongs to this named cache will be replicated on another role instance of this role. Then if one of the instance was failed the data can be retrieved from its backup instance. To enable the backup just open the Caching page in Visual Studio. In the named cache you want to enable backup, change the Backup Copies value from 0 to 1. The value of Backup Copies only for 0 and 1. “0” means no backup and no high availability while “1” means enabled high availability with backup the data into another instance. But by using the high availability feature there are something we need to make sure. Firstly the high availability does NOT means the data in cache will never be lost for any kind of failure. For example, if we have a role with cache enabled that has 10 instances, and 9 of them was failed, then most of the cached data will be lost since the primary and backup instance may failed together. But normally is will not be happened since MS guarantees that it will use the instance in the different fault domain for backup cache. Another one is that, enabling the backup means you store two copies of your data. For example if you think 100MB memory is OK for cache, but you need at least 200MB if you enabled backup. Besides the high availability, the Caching (Preview) support more features introduced in Windows Server AppFabric Caching than the Windows Azure Shared Caching. It supports local cache with notification. It also support absolute and slide window expiration types as well. And the Caching (Preview) also support the Memcached protocol as well. This means if you have an application based on Memcached, you can use Caching (Preview) without any code changes. What you need to do is to change the configuration of how you connect to the cache. Similar as the Windows Azure Shared Caching, MS also offers the out-of-box ASP.NET session provider and output cache provide on top of the Caching (Preview).   Summary Caching is very important component when we building a cloud-based application. In the June 2012 update MS provides a new cache solution named Caching (Preview). Different from the existing Windows Azure Shared Caching, Caching (Preview) runs the cache cluster within the role instances we have deployed to the cloud. It gives more control, more performance and more cost-effect. So now we have two caching solutions in Windows Azure, the Shared Caching and Caching (Preview). If you need a central cache service which can be used by many cloud services and web sites, then you have to use the Shared Caching. But if you only need a fast, near distributed cache, then you’d better use Caching (Preview).   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Type '_Default' already contains a definition

    - by salvationishere
    I am developing a C# VS 2008 / SQL Server 2008 website. I have a Gridview. I included the Default.aspx and aspx.cs files below. But when I build this I get the below error: The Type '_Default' already contains a definition for 'btnOWrite' What do I need to do to fix this? I am not getting any errors now; just that this grid does not show up. Thanks! ASPX file: <%@ Page Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" Title="Untitled Page" %> <asp:Content ID="Content1" ContentPlaceHolderID="MainContent" runat="Server"> <asp:Panel runat="server" ID="AuthenticatedMessagePanel"> <asp:Label runat="server" ID="WelcomeBackMessage"></asp:Label> <table> <tr> <td> <asp:Label ID="tableLabel" runat="server" Font-Bold="True" Text="Select target table:"></asp:Label> </td> <td> <asp:Label ID="inputLabel" runat="server" Font-Bold="True" Text="Select input file:"></asp:Label> </td> </tr> <tr> <td valign="top"> <asp:Label ID="feedbackLabel" runat="server"></asp:Label> <asp:SqlDataSource ID="SelectTables" runat="server" ConnectionString="<%$ ConnectionStrings:AdventureWorks3_SelectTables %>" SelectCommand="getTableNames" SelectCommandType="StoredProcedure"> <SelectParameters> <asp:QueryStringParameter DefaultValue="Person" Name="SchemaName" QueryStringField="SchemaName" Type="String" /> </SelectParameters> </asp:SqlDataSource> <asp:GridView ID="GridView1" DataSourceID="SelectTables" runat="server" Style="width: 400px;" CellPadding="4" ForeColor="#333333" GridLines="None" OnSelectedIndexChanged="GridView1_SelectedIndexChanged" AutoGenerateSelectButton="True" DataKeyNames="TABLE_NAME"> <RowStyle BackColor="#F7F6F3" ForeColor="#333333" /> <Columns> <asp:BoundField HeaderText="TABLE_NAME" DataField="TABLE_NAME" /> </Columns> <FooterStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <PagerStyle BackColor="#284775" ForeColor="White" HorizontalAlign="Center" /> <SelectedRowStyle BackColor="#E2DED6" Font-Bold="True" ForeColor="#333333" /> <HeaderStyle BackColor="#5D7B9D" Font-Bold="True" ForeColor="White" /> <EditRowStyle BackColor="#999999" /> <AlternatingRowStyle BackColor="White" ForeColor="#284775" /> </asp:GridView> </td> <td valign="top"> <input id="uploadFile" type="file" size="26" runat="server" name="uploadFile" title="UploadFile" class="greybar" enableviewstate="True" /> </td> </tr> </table> <table> <tr> <td style="width:150px; height:50px"></td> <td valign="bottom" style="width:150px; height:50px"> <input id="btnOWrite" type="submit" value="Overwrite Data" runat="server" class="greybar" onserverclick="btnOWrite_Click" name="btnOWrite" />&nbsp; </td> <td style="width:100px"></td> <td valign="bottom" style="width:150px; height:50px"> <input id="btnAppend" type="submit" value="Append Data" runat="server" class="greybar" onserverclick="btnAppend_Click" name="btnAppend" /> </td> </tr> </table> </asp:Panel> <asp:Panel runat="Server" ID="AnonymousMessagePanel"> <asp:HyperLink runat="server" ID="lnkLogin" Text="Log In" NavigateUrl="~/Login.aspx"> </asp:HyperLink> </asp:Panel> </asp:Content> ASPX.CS file: using System; using System.Collections; using System.Configuration; using System.Data; using System.Linq; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.HtmlControls; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Xml.Linq; using System.Collections.Generic; using System.IO; using System.Drawing; using System.ComponentModel; using System.Data.SqlClient; using ADONET_namespace; using System.Security.Principal; //using System.Windows; public partial class _Default : System.Web.UI.Page //namespace AddFileToSQL { //protected System.Web.UI.HtmlControls.HtmlInputFile uploadFile; protected System.Web.UI.HtmlControls.HtmlInputButton btnOWrite; protected System.Web.UI.HtmlControls.HtmlInputButton btnAppend; protected System.Web.UI.WebControls.Label Label1; protected static string inputfile = ""; public static string targettable; public static string selection; // Number of controls added to view state protected int default_NumberOfControls { get { if (ViewState["default_NumberOfControls"] != null) { return (int)ViewState["default_NumberOfControls"]; } else { return 0; } } set { ViewState["default_NumberOfControls"] = value; } } protected void uploadFile_onclick(object sender, EventArgs e) { } protected void Load_GridData() { //GridView1.DataSource = ADONET_methods.DisplaySchemaTables(); //GridView1.DataBind(); } protected void btnOWrite_Click(object sender, EventArgs e) { if (uploadFile.PostedFile.ContentLength > 0) { feedbackLabel.Text = "You do not have sufficient access to overwrite table records."; } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void btnAppend_Click(object sender, EventArgs e) { string fullpath = Page.Request.PhysicalApplicationPath; string path = uploadFile.PostedFile.FileName; if (File.Exists(path)) { // Create a file to write to. try { StreamReader sr = new StreamReader(path); string s = ""; while (sr.Peek() > 0) s = sr.ReadLine(); sr.Close(); } catch (IOException exc) { Console.WriteLine(exc.Message + "Cannot open file."); return; } } if (uploadFile.PostedFile.ContentLength > 0) { inputfile = System.IO.File.ReadAllText(path); Session["Message"] = inputfile; Response.Redirect("DataMatch.aspx"); } else { feedbackLabel.Text = "This file does not contain any data."; } } protected void Page_Load(object sender, EventArgs e) { if (Request.IsAuthenticated) { WelcomeBackMessage.Text = "Welcome back, " + User.Identity.Name + "!"; // Reference the CustomPrincipal / CustomIdentity CustomIdentity ident = User.Identity as CustomIdentity; if (ident != null) WelcomeBackMessage.Text += string.Format(" You are the {0} of {1}.", ident.Title, ident.CompanyName); AuthenticatedMessagePanel.Visible = true; AnonymousMessagePanel.Visible = false; if (!Page.IsPostBack) { Load_GridData(); } } else { AuthenticatedMessagePanel.Visible = false; AnonymousMessagePanel.Visible = true; } } protected void GridView1_SelectedIndexChanged(object sender, EventArgs e) { GridViewRow row = GridView1.SelectedRow; targettable = row.Cells[2].Text; } }

    Read the article

  • Error with my Android Application httpGet

    - by Coombes
    Basically I'm getting a strange issue with my Android application, it's supposed to grab a JSON Array and print out some values, the class looks like this: ShowComedianActivity.class package com.example.connecttest; public class ShowComedianActivity extends Activity{ TextView name; TextView add; TextView email; TextView tel; String id; // Progress Dialog private ProgressDialog pDialog; //JSON Parser class JSONParser jsonParser = new JSONParser(); // Single Comedian url private static final String url_comedian_details = "http://86.9.71.17/connect/get_comedian_details.php"; // JSON Node names private static final String TAG_SUCCESS = "success"; private static final String TAG_COMEDIAN = "comedian"; private static final String TAG_ID = "id"; private static final String TAG_NAME = "name"; private static final String TAG_ADDRESS = "address"; private static final String TAG_EMAIL = "email"; private static final String TAG_TEL = "tel"; public void onCreate(Bundle savedInstanceState){ super.onCreate(savedInstanceState); setContentView(R.layout.show_comedian); // Getting Comedian Details from intent Intent i = getIntent(); // Getting id from intent id = i.getStringExtra(TAG_ID); new GetComedianDetails().execute(); } class GetComedianDetails extends AsyncTask<String, String, String>{ protected void onPreExecute(){ super.onPreExecute(); pDialog = new ProgressDialog(ShowComedianActivity.this); pDialog.setMessage("Fetching Comedian details. Please wait..."); pDialog.setIndeterminate(false); pDialog.setCancelable(true); pDialog.show(); } @Override protected String doInBackground(String... params) { runOnUiThread(new Runnable(){ public void run(){ int success; try{ //Building parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("id",id)); // Getting comedian details via HTTP request // Uses a GET request JSONObject json = jsonParser.makeHttpRequest(url_comedian_details, "GET", params); // Check Log for json response Log.d("Single Comedian details", json.toString()); //JSON Success tag success = json.getInt(TAG_SUCCESS); if(success == 1){ // Succesfully received product details JSONArray comedianObj = json.getJSONArray(TAG_COMEDIAN); //JSON Array // get first comedian object from JSON Array JSONObject comedian = comedianObj.getJSONObject(0); // comedian with id found name = (TextView) findViewById(R.id.name); add = (TextView) findViewById(R.id.add); email = (TextView) findViewById(R.id.email); tel = (TextView) findViewById(R.id.tel); // Set text to details name.setText(comedian.getString(TAG_NAME)); add.setText(comedian.getString(TAG_ADDRESS)); email.setText(comedian.getString(TAG_EMAIL)); tel.setText(comedian.getString(TAG_TEL)); } } catch (JSONException e){ e.printStackTrace(); } } }); return null; } } } And my JSON Parser class looks like: package com.example.connecttest; public class JSONParser { static InputStream is = null; static JSONObject jObj = null; static String json = ""; // constructor public JSONParser() { } // function get json from url // by making HTTP POST or GET method public JSONObject makeHttpRequest(String url, String method, List<NameValuePair> params) { // Making HTTP request try { // check for request method if(method == "POST"){ // request method is POST // defaultHttpClient DefaultHttpClient httpClient = new DefaultHttpClient(); HttpPost httpPost = new HttpPost(url); httpPost.setEntity(new UrlEncodedFormEntity(params)); HttpResponse httpResponse = httpClient.execute(httpPost); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); }else if(method == "GET"){ // request method is GET DefaultHttpClient httpClient = new DefaultHttpClient(); String paramString = URLEncodedUtils.format(params, "utf-8"); url += "?" + paramString; HttpGet httpGet = new HttpGet(url); HttpResponse httpResponse = httpClient.execute(httpGet); HttpEntity httpEntity = httpResponse.getEntity(); is = httpEntity.getContent(); } } catch (UnsupportedEncodingException e) { e.printStackTrace(); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } try { BufferedReader reader = new BufferedReader(new InputStreamReader( is, "iso-8859-1"), 8); StringBuilder sb = new StringBuilder(); String line = null; while ((line = reader.readLine()) != null) { sb.append(line + "\n"); } is.close(); json = sb.toString(); } catch (Exception e) { Log.e("Buffer Error", "Error converting result " + e.toString()); } // try parse the string to a JSON object try { jObj = new JSONObject(json); } catch (JSONException e) { Log.e("JSON Parser", "Error parsing data " + e.toString()); } // return JSON String return jObj; } } Now when I run a debug it's querying the correct address with ?id=1 on the end of the URL, and when I navigate to that url I get the following JSON Array: {"success":1,"comedian":[{"id":"1","name":"Michael Coombes","address":"5 Trevethenick Road","email":"[email protected]","tel":"xxxxxxxxxxxx"}]} However my app just crashes, the log-cat report looks like this: 03-22 02:05:02.140: E/Trace(3776): error opening trace file: No such file or directory (2) 03-22 02:05:04.590: E/AndroidRuntime(3776): FATAL EXCEPTION: main 03-22 02:05:04.590: E/AndroidRuntime(3776): android.os.NetworkOnMainThreadException 03-22 02:05:04.590: E/AndroidRuntime(3776): at android.os.StrictMode$AndroidBlockGuardPolicy.onNetwork(StrictMode.java:1117) 03-22 02:05:04.590: E/AndroidRuntime(3776): at libcore.io.BlockGuardOs.connect(BlockGuardOs.java:84) 03-22 02:05:04.590: E/AndroidRuntime(3776): at libcore.io.IoBridge.connectErrno(IoBridge.java:127) 03-22 02:05:04.590: E/AndroidRuntime(3776): at libcore.io.IoBridge.connect(IoBridge.java:112) 03-22 02:05:04.590: E/AndroidRuntime(3776): at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:192) 03-22 02:05:04.590: E/AndroidRuntime(3776): at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:459) 03-22 02:05:04.590: E/AndroidRuntime(3776): at java.net.Socket.connect(Socket.java:842) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.conn.scheme.PlainSocketFactory.connectSocket(PlainSocketFactory.java:119) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:144) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:164) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:119) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:360) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:555) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:487) 03-22 02:05:04.590: E/AndroidRuntime(3776): at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:465) 03-22 02:05:04.590: E/AndroidRuntime(3776): at com.example.connecttest.JSONParser.makeHttpRequest(JSONParser.java:62) 03-22 02:05:04.590: E/AndroidRuntime(3776): at com.example.connecttest.ShowComedianActivity$GetComedianDetails$1.run(ShowComedianActivity.java:89) 03-22 02:05:04.590: E/AndroidRuntime(3776): at android.os.Handler.handleCallback(Handler.java:615) 03-22 02:05:04.590: E/AndroidRuntime(3776): at android.os.Handler.dispatchMessage(Handler.java:92) 03-22 02:05:04.590: E/AndroidRuntime(3776): at android.os.Looper.loop(Looper.java:137) 03-22 02:05:04.590: E/AndroidRuntime(3776): at android.app.ActivityThread.main(ActivityThread.java:4745) 03-22 02:05:04.590: E/AndroidRuntime(3776): at java.lang.reflect.Method.invokeNative(Native Method) 03-22 02:05:04.590: E/AndroidRuntime(3776): at java.lang.reflect.Method.invoke(Method.java:511) 03-22 02:05:04.590: E/AndroidRuntime(3776): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:786) 03-22 02:05:04.590: E/AndroidRuntime(3776): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:553) 03-22 02:05:04.590: E/AndroidRuntime(3776): at dalvik.system.NativeStart.main(Native Method) From this I'm guessing the error is in the jsonParser.makeHttpRequest however I can't for the life of me figure out what's going wrong and was hoping someone brighter than I could illuminate me.

    Read the article

  • Strange problem with Random Access Filing in C++

    - by sam
    This is a simple random access filing program . The problem arises where i want to write data randomly. If I write any where in the file the previous records are set to 0. the last 1 which is being entered currently holds the correct value all others =0. This is the code #include <iostream> #include<fstream> #include<string> using namespace std; class name { int id; int pass; public: void writeBlank(); void writedata(); void readdata(); void readall(); int getid() { return id; } int getpass() { return pass; } void setid(int i) { id=i; } void setpass(int p) { pass=p; } }; void name::writeBlank() { name person; person.setid(0); person.setpass(0); int i; ofstream out("pass.txt",ios::binary); if ( !out ) { cout << "File could not be opened." << endl; } for(i=0;i<10;i++) //make 10 records { cout<<"Put pointer is at: "<<out.tellp()<<endl; cout<<"Blank record "<<i<<" is: "<<person.getid()<<" "<<person.getpass()<<" and size: "<<sizeof(person)<<endl; cout<<"Put pointer is at: "<<out.tellp()<<endl; out.write(reinterpret_cast< const char * >(&person),sizeof(name)); } } void name::writedata() { ofstream out("pass.txt",ios::binary|ios::out); name n1; int iD,p; cout<<"ID?"; cin>>iD; n1.setid(iD); cout<<"Enter password"; cin>>p; n1.setpass(p); if (!out ) { cout << "File could not be opened." << endl; } out.seekp((n1.getid()-1)*sizeof(name),ios::beg); //pointer moves to desired location where we have to store password according to its ID(index) cout<<"File pointer is at: "<<out.tellp()<<endl; out.write(reinterpret_cast<const char*> (&n1), sizeof(name)); //write on that pointed location } void name::readall() { name n1; ifstream in("pass.txt",ios::binary); if ( !in ) { cout << "File could not be opened." << endl; } in.read( reinterpret_cast<char *>(&n1), sizeof(name) ); while ( !in.eof() ) { // display record cout<<endl<<"password at this index is:"<<n1.getpass()<<endl; cout<<"File pointer is at: "<<in.tellg()<<endl; // read next from file in.read( reinterpret_cast< char * >(&n1), sizeof(name)); } // end while } void name::readdata() { ifstream in("pass.txt",ios::binary); if ( !in ) { cout << "File could not be opened." << endl; } in.seekg((getid()-1)*sizeof(name)); //pointer moves to desired location where we have to read password according to its ID(index) cout<<"File pointer is at: "<<in.tellg()<<endl; in.read((char* )this,sizeof(name)); //reads from that pointed location cout<<endl<<"password at this index is:"<<getpass()<<endl; } int main() { name n1; cout<<"Enter 0 to write blank records"<<endl; cout<<"Enter 1 for new account"<<endl; cout<<"Enter 2 to login"<<endl; cout<<"Enter 3 to read all"<<endl; cout<<"Enter 9 to exit"<<endl; int option; cin>>option; while(option==0 || option==1 || option==2 || option==3) { if (option == 0) n1.writeBlank(); if(option==1) { /*int iD,p; cout<<"ID?"; cin>>iD; n1.setid(iD); cout<<"Enter password"; cin>>p; n1.setpass(p);*/ n1.writedata(); } int ind; if(option==2) { cout<<"Index?"; cin>>ind; n1.setid(ind); n1.readdata(); } if(option == 3) n1.readall(); cout<<"Enter 0 to write blank records"<<endl; cout<<"Enter 1 for new account"<<endl; cout<<"Enter 2 to login"<<endl; cout<<"Enter 3 to read all"<<endl; cout<<"Enter 9 to exit"<<endl; cin>>option; } } I Cant understand Y the previous records turn 0.

    Read the article

  • How to autosum value on dropdown and radio select

    - by Wilf
    I'm working on an auto calculation form which is a total column will change after a radio and a dropdown is clicked. I can make the total change for both dropdowns but the problem occurs when I tried to add a radio option. Here is my code. HTML Ages 10+: <select id="Adult" name="Adult"> <option selected="selected" value="0">0</option> <option value="1">1</option> <option value="2">2</option> <option value="3">3</option> <option value="4">4</option> <option value="5">5</option> <option value="6">6</option> <option value="7">7</option> <option value="8">8</option> <option value="9">9</option> </select> <br />Ages 3-9: <select id="Child" name="Child"> <option selected="selected" value="0">0</option> <option value="1">1</option> <option value="2">2</option> <option value="3">3</option> <option value="4">4</option> <option value="5">5</option> <option value="6">6</option> <option value="7">7</option> <option value="8">8</option> <option value="9">9</option> </select> <br />Food <input type="radio" name="food" id="food0" value="0" /> <label for="food0">No</label> <input type="radio" name="food" id="food1" value="10" /> <label for="food1">Yes</label> <table width="100%" border="1" align="center"> <tr> <td>Product</td> <td>Ages 10+</td> <td>Ages 3-9</td> <td>Food</td> <td>Price</td> </tr> <tr> <td>2 Day Ticket</td> <td>$235.00</td> <td>$223.00</td> <td><span id="food">0</span> </td> <td>$<span class="amount" id="2DayTotal"></span> </td> </tr> <tr> <td>3 Day Ticket</td> <td>$301.00</td> <td>$285.00</td> <td><span id="food">0</span> </td> <td>$<span class="amount" id="3DayTotal"></span> </td> </tr> <tr> <td>4 Day Ticket</td> <td>$315.00</td> <td>$298.00</td> <td><span id="food">0</span> </td> <td>$<span class="amount" id="4DayTotal"></span> </td> </tr> <tr> <td>5 Day Ticket</td> <td>$328.00</td> <td>$309.00</td> <td><span id="food">0</span> </td> <td>$<span class="amount" id="5DayTotal"></span> </td> </tr> </table> JavaScript var numAdult = 0; var numChild = 0; $("#Adult").change(function () { numAdult = $("#Adult").val(); calcTotals(); }); $("#Child").change(function () { numChild = $("#Child").val(); calcTotals(); }); $('input[type=radio]').change(function(evt) { $('#food').html($(this).val()); }); function calcTotals() { $("#2DayTotal").text(235 * numAdult + 223 * numChild); $("#3DayTotal").text(301 * numAdult + 285 * numChild); $("#4DayTotal").text(315 * numAdult + 298 * numChild); $("#5DayTotal").text(328 * numAdult + 309 * numChild); } The issues are: I'd like the food column change to it's value when a radio is click. It works only the first id. After a radio is clicked. A fumction calcTotals() is called to sum an additional food cost. Demo here : http://jsfiddle.net/4Jegn/178/ Please be advice.

    Read the article

  • Cannot connect to Amazon RDS

    - by Justin
    I have created an Amazon RDS database under the free tier (SQL Server Express, micro instance etc.), but I cannot connect to the server using Microsoft SQL Server Management Studio. I have configured the security group of the database instance (default) to accept my IP address. I am following the connection guide from amazon located here The error I receive is: Cannot connect to databaseName.c***rnqg***v.us-east-1.rds.amazonaws.com,1433. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060) I am using Server type "Database Engine" and using SQL Server Authentication.

    Read the article

  • OAM OVD integration - Error Encounterd while performance test "LDAP response read timed out, timeout used:2000ms"

    - by siddhartha_sinha
    While working on OAM OVD integration for one of my client, I have been involved in the performance test of the products wherein I encountered OAM authentication failures while talking to OVD during heavy load. OAM logs revealed the following: oracle.security.am.common.policy.common.response.ResponseException: oracle.security.am.engines.common.identity.provider.exceptions.IdentityProviderException: OAMSSA-20012: Exception in getting user attributes for user : dummy_user1, idstore MyIdentityStore with exception javax.naming.NamingException: LDAP response read timed out, timeout used:2000ms.; remaining name 'ou=people,dc=oracle,dc=com' at oracle.security.am.common.policy.common.response.IdentityValueProvider.getUserAttribute(IdentityValueProvider.java:271) ... During the authentication and authorization process, OAM complains that the LDAP repository is taking too long to return user attributes.The default value is 2 seconds as can be seen from the exception, "2000ms". While troubleshooting the issue, it was found that we can increase the ldap read timeout in oam-config.xml.  For reference, the attribute to add in the oam-config.xml file is: <Setting Name="LdapReadTimeout" Type="xsd:string">2000</Setting> However it is not recommended to increase the time out unless it is absolutely necessary and ensure that back-end directory servers are working fine. Rather I took the path of tuning OVD in the following manner: 1) Navigate to ORACLE_INSTANCE/config/OPMN/opmn folder and edit opmn.xml. Search for <data id="java-options" ………> and edit the contents of the file with the highlighted items: <category id="start-options"><data id="java-bin" value="$ORACLE_HOME/jdk/bin/java"/><data id="java-options" value="-server -Xms1024m -Xmx1024m -Dvde.soTimeoutBackend=0 -Didm.oracle.home=$ORACLE_HOME -Dcommon.components.home=$ORACLE_HOME/../oracle_common -XX:+PrintGCDetails -XX:+PrintGCDateStamps -Xloggc:/opt/bea/Middleware/asinst_1/diagnostics/logs/OVD/ovd1/ovdGClog.log -XX:+UseConcMarkSweepGC -Doracle.security.jps.config=$ORACLE_INSTANCE/config/JPS/jps-config-jse.xml"/><data id="java-classpath" value="$ORACLE_HOME/ovd/jlib/vde.jar$:$ORACLE_HOME/jdbc/lib/ojdbc6.jar"/></category></module-data><stop timeout="120"/><ping interval="60"/></process-type> When the system is busy, a ping from the Oracle Process Manager and Notification Server (OPMN) to Oracle Virtual Directory may fail. As a result, OPMN will restart Oracle Virtual Directory after 20 seconds (the default ping interval). To avoid this, consider increasing the ping interval to 60 seconds or more. 2) Navigate to ORACLE_INSTANCE/config/OVD/ovd1 folder.Open listeners.os_xml file and perform the following changes: · Search for <ldap id=”Ldap Endpoint”…….> and point the cursor to that line. · Change threads count to 200. · Change anonymous bind to Deny. · Change workQueueCapacity to 8096. Add a new parameter <useNIO> and set its value to false viz: <useNIO>false</useNio> Snippet: <ldap version="8" id="LDAP Endpoint"> ....... .......  <socketOptions><backlog>128</backlog>         <reuseAddress>false</reuseAddress>         <keepAlive>false</keepAlive>         <tcpNoDelay>true</tcpNoDelay>         <readTimeout>0</readTimeout>      </socketOptions> <useNIO>false</useNIO></ldap> Restart OVD server. For more information on OVD tuneup refer to http://docs.oracle.com/cd/E25054_01/core.1111/e10108/ovd.htm. Please Note: There were few patches released from OAM side for performance tune-up as well. Will provide the updates shortly !!!

    Read the article

  • C# HashSet<T>

    - by Ben Griswold
    I hadn’t done much (read: anything) with the C# generic HashSet until I recently needed to produce a distinct collection.  As it turns out, HashSet<T> was the perfect tool. As the following snippet demonstrates, this collection type offers a lot: // Using HashSet<T>: // http://www.albahari.com/nutshell/ch07.aspx var letters = new HashSet<char>("the quick brown fox");   Console.WriteLine(letters.Contains('t')); // true Console.WriteLine(letters.Contains('j')); // false   foreach (char c in letters) Console.Write(c); // the quickbrownfx Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.IntersectWith("aeiou"); foreach (char c in letters) Console.Write(c); // euio Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.ExceptWith("aeiou"); foreach (char c in letters) Console.Write(c); // th qckbrwnfx Console.WriteLine();   letters = new HashSet<char>("the quick brown fox"); letters.SymmetricExceptWith("the lazy brown fox"); foreach (char c in letters) Console.Write(c); // quicklazy Console.WriteLine(); The MSDN documentation is a bit light on HashSet<T> documentation but if you search hard enough you can find some interesting information and benchmarks. But back to that distinct list I needed… // MSDN Add // http://msdn.microsoft.com/en-us/library/bb353005.aspx var employeeA = new Employee {Id = 1, Name = "Employee A"}; var employeeB = new Employee {Id = 2, Name = "Employee B"}; var employeeC = new Employee {Id = 3, Name = "Employee C"}; var employeeD = new Employee {Id = 4, Name = "Employee D"};   var naughty = new List<Employee> {employeeA}; var nice = new List<Employee> {employeeB, employeeC};   var employees = new HashSet<Employee>(); naughty.ForEach(x => employees.Add(x)); nice.ForEach(x => employees.Add(x));   foreach (Employee e in employees) Console.WriteLine(e); // Returns Employee A Employee B Employee C The Add Method returns true on success and, you guessed it, false if the item couldn’t be added to the collection.  I’m using the Linq ForEach syntax to add all valid items to the employees HashSet.  It works really great.  This is just a rough sample, but you may have noticed I’m using Employee, a reference type.  Most samples demonstrate the power of the HashSet with a collection of integers which is kind of cheating.  With value types you don’t have to worry about defining your own equality members.  With reference types, you do. internal class Employee {     public int Id { get; set; }     public string Name { get; set; }       public override string ToString()     {         return Name;     }          public bool Equals(Employee other)     {         if (ReferenceEquals(null, other)) return false;         if (ReferenceEquals(this, other)) return true;         return other.Id == Id;     }       public override bool Equals(object obj)     {         if (ReferenceEquals(null, obj)) return false;         if (ReferenceEquals(this, obj)) return true;         if (obj.GetType() != typeof (Employee)) return false;         return Equals((Employee) obj);     }       public override int GetHashCode()     {         return Id;     }       public static bool operator ==(Employee left, Employee right)     {         return Equals(left, right);     }       public static bool operator !=(Employee left, Employee right)     {         return !Equals(left, right);     } } Fortunately, with Resharper, it’s a snap. Click on the class name, ALT+INS and then follow with the handy dialogues. That’s it. Try out the HashSet<T>. It’s good stuff.

    Read the article

  • Installing Lubuntu 14.04.1 forcepae fails

    - by Rantanplan
    I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

    Read the article

  • Can't open DDMS

    - by Emerald214
    When I open a standalone DDMS besides Eclipse, it generates the below error. hieund@hieund:~$ ddms 01:51:58 E/ddms: Could not open Selected VM debug port (8700). Make sure you do not have another instance of DDMS or of the eclipse plugin running. If it's being used by something else, choose a new port number in the preferences. (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 01:52:18 E/DDMS: device offline com.android.ddmlib.AdbCommandRejectedException: device offline at com.android.ddmlib.AdbHelper.setDevice(AdbHelper.java:736) at com.android.ddmlib.AdbHelper.executeRemoteCommand(AdbHelper.java:373) at com.android.ddmlib.Device.executeShellCommand(Device.java:364) at com.android.ddmuilib.SysinfoPanel.loadFromDevice(SysinfoPanel.java:159) at com.android.ddmuilib.SysinfoPanel.deviceSelected(SysinfoPanel.java:126) at com.android.ddmuilib.SelectionDependentPanel.deviceSelected(SelectionDependentPanel.java:52) at com.android.ddms.UIThread.selectionChanged(UIThread.java:1721) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:752) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:740) at com.android.ddmuilib.DevicePanel.access$1100(DevicePanel.java:56) at com.android.ddmuilib.DevicePanel$1.widgetSelected(DevicePanel.java:357) at org.eclipse.swt.widgets.TypedListener.handleEvent(Unknown Source) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Display.runDeferredEvents(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) 01:52:32 E/ddms: shutting down due to uncaught exception 01:52:32 E/ddms: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) Caused by: java.lang.ArrayIndexOutOfBoundsException: -1 at org.eclipse.jface.viewers.AbstractTableViewer$VirtualManager.resolveElement(AbstractTableViewer.java:100) at org.eclipse.jface.viewers.AbstractTableViewer$1.handleEvent(AbstractTableViewer.java:70) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Table.checkData(Unknown Source) at org.eclipse.swt.widgets.Table.cellDataProc(Unknown Source) at org.eclipse.swt.widgets.Display.cellDataProc(Unknown Source) at org.eclipse.swt.internal.gtk.OS._gtk_list_store_append(Native Method) at org.eclipse.swt.internal.gtk.OS.gtk_list_store_append(Unknown Source) at org.eclipse.swt.widgets.Table.setItemCount(Unknown Source) at org.eclipse.jface.viewers.TableViewer.doSetItemCount(TableViewer.java:217) at org.eclipse.jface.viewers.AbstractTableViewer.internalVirtualRefreshAll(AbstractTableViewer.java:661) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:635) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620) at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1430) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1365) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1328) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1428) at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:537) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1387) at com.android.ddmuilib.logcat.LogCatPanel$LogCatTableRefresherTask.run(LogCatPanel.java:1000) at org.eclipse.swt.widgets.RunnableLock.run(Unknown Source) ... 5 more I tried to change port for DDMS in Eclipse but it still doesn't work.

    Read the article

  • IPtables AWS EC2 NAT/Reverse NAT - For Reverse Proxy style setup but with IPtables

    - by Mark
    I was thinking initially needing to do a reverse proxy or something so I could get some SSL/TLS traffic look like it is being terminated at a server and IP address in the AWS cloud, and then that traffic is forwarded onto our actual web servers that aren't in the cloud... I've not done much iptables pre and post routing before Dnat or Snat which I know are the things I need or a combination of the things I need in order achieve what i'm trying. Things to note:- Client/User - Must not be able to see backend IP address and only see the IP address of the cloud box https (TLS/SSL) - connection shouldn't be terminated at the cloud box, it should act like a router almost EC2 instance - Has only one network interface available to play with... this is thus an (internet <- internet) type of routing going on. EC2 instance IP address is already more or less behind a NAT that I have no control over, for example... Public ip address could be 46.1.1.1 but instance IP will be 10.1.1.1. Connections from client will go to 46.1.1.1 which will end up at the instance and on interface 10.1.1.1. The connection from the client then needs to be forwarded (DNAT) onto the backend web servers which are back out on the internet (SNAT). Possibly a part of the problem could be that the SNAT will need to be set to the external interface of the instance and I wonder if this makes it harder for IPtables to track the connection? So looking to basically, have it look as though connections are terminating at this server and its IP address. Whereas all that's really happening is the https request and connection is being forwarded straight onto another internet facing web server. How possible does that sound?

    Read the article

  • Windows Server 2003 Terminal Server does not give out all available licenses

    - by Erwin Blonk
    I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Long story short, here is what it says now: Existing Windows 2000 Server, type:built-in [no licenses used, I add for for sake of being complete] Windows Server 2003 - Terminal Server Per Device CAL Token, type:open [none of 10 used] Windows Server 2003 - TS Per Device CAL, type:open [3 of 10 used] As I tried to explain, this is the end result after a few changes, most of which I can't directly connect to any action from my part. Only going to the activation procedure by phone seemed to directly effect the TS, resulting in the above configuration. Still, it is impossible to connect with more than 3 people, which is 1 up from the 2 that could connect yesterday. TS does say 7 licenses are avaible. Yet it won't give them out.

    Read the article

  • MVC 2 Editor Template for Radio Buttons

    - by Steve Michelotti
    A while back I blogged about how to create an HTML Helper to produce a radio button list.  In that post, my HTML helper was “wrapping” the FluentHtml library from MvcContrib to produce the following html output (given an IEnumerable list containing the items “Foo” and “Bar”): 1: <div> 2: <input id="Name_Foo" name="Name" type="radio" value="Foo" /><label for="Name_Foo" id="Name_Foo_Label">Foo</label> 3: <input id="Name_Bar" name="Name" type="radio" value="Bar" /><label for="Name_Bar" id="Name_Bar_Label">Bar</label> 4: </div> With the release of MVC 2, we now have editor templates we can use that rely on metadata to allow us to customize our views appropriately.  For example, for the radio buttons above, we want the “id” attribute to be differentiated and unique and we want the “name” attribute to be the same across radio buttons so the buttons will be grouped together and so model binding will work appropriately. We also want the “for” attribute in the <label> element being set to correctly point to the id of the corresponding radio button.  The default behavior of the RadioButtonFor() method that comes OOTB with MVC produces the same value for the “id” and “name” attributes so this isn’t exactly what I want out the the box if I’m trying to produce the HTML mark up above. If we use an EditorTemplate, the first gotcha that we run into is that, by default, the templates just work on your view model’s property. But in this case, we *also* was the list of items to populate all the radio buttons. It turns out that the EditorFor() methods do give you a way to pass in additional data. There is an overload of the EditorFor() method where the last parameter allows you to pass an anonymous object for “extra” data that you can use in your view – it gets put on the view data dictionary: 1: <%: Html.EditorFor(m => m.Name, "RadioButtonList", new { selectList = new SelectList(new[] { "Foo", "Bar" }) })%> Now we can create a file called RadioButtonList.ascx that looks like this: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <% 3: var list = this.ViewData["selectList"] as SelectList; 4: %> 5: <div> 6: <% foreach (var item in list) { 7: var radioId = ViewData.TemplateInfo.GetFullHtmlFieldId(item.Value); 8: var checkedAttr = item.Selected ? "checked=\"checked\"" : string.Empty; 9: %> 10: <input type="radio" id="<%: radioId %>" name="<%: ViewData.TemplateInfo.HtmlFieldPrefix %>" value="<%: item.Value %>" <%: checkedAttr %>/> 11: <label for="<%: radioId %>"><%: item.Text %></label> 12: <% } %> 13: </div> There are several things to note about the code above. First, you can see in line #3, it’s getting the SelectList out of the view data dictionary. Then on line #7 it uses the GetFullHtmlFieldId() method from the TemplateInfo class to ensure we get unique IDs. We pass the Value to this method so that it will produce IDs like “Name_Foo” and “Name_Bar” rather than just “Name” which is our property name. However, for the “name” attribute (on line #10) we can just use the normal HtmlFieldPrefix property so that we ensure all radio buttons have the same name which corresponds to the view model’s property name. We also get to leverage the fact the a SelectListItem has a Boolean Selected property so we can set the checkedAttr variable on line #8 and use it on line #10. Finally, it’s trivial to set the correct “for” attribute for the <label> on line #11 since we already produced that value. Because the TemplateInfo class provides all the metadata for our view, we’re able to produce this view that is widely re-usable across our application. In fact, we can create a couple HTML helpers to better encapsulate this call and make it more user friendly: 1: public static MvcHtmlString RadioButtonList<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, params string[] items) 2: { 3: return htmlHelper.RadioButtonList(expression, new SelectList(items)); 4: } 5:   6: public static MvcHtmlString RadioButtonList<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, IEnumerable<SelectListItem> items) 7: { 8: var func = expression.Compile(); 9: var result = func(htmlHelper.ViewData.Model); 10: var list = new SelectList(items, "Value", "Text", result); 11: return htmlHelper.EditorFor(expression, "RadioButtonList", new { selectList = list }); 12: } This allows us to simply the call like this: 1: <%: Html.RadioButtonList(m => m.Name, "Foo", "Bar" ) %> In that example, the values for the radio button are hard-coded and being passed in directly. But if you had a view model that contained a property for the collection of items you could call the second overload like this: 1: <%: Html.RadioButtonList(m => m.Name, Model.FooBarList ) %> The Editor templates introduced in MVC 2 definitely allow for much more flexible views/editors than previously available. By knowing about the features you have available to you with the TemplateInfo class, you can take these concepts and customize your editors with extreme flexibility and re-usability.

    Read the article

  • nouveau Unknown Fermi chipset

    - by Abood Mount
    I've installed a fresh install of Ubuntu 13.04 and whenever I start my laptop I get this output error [ 19.469816] nouveau ![ DEVICE][0000:01:00.0] unknown Fermi chipset [ 19.469846] nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x0d7000a2 [ 19.469870] nouveau E[ DRM] failed to create 0x80000080, -22 [ 19.470095] nouveau: probe of 0000:01:00.0 failed with error -22 I have Lenovo G580 with nVidia Geforce 710m.

    Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >