Search Results

Search found 13082 results on 524 pages for 'ip camera'.

Page 297/524 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

  • Dual HDMI input - HD Video Capture Card

    - by Shivan Raptor
    Any suggestion for HD video capture card? Here is my requirements: I need 2 HDMI input for 2 HD Camera the signal captured will be encoded with Adobe Live Encoder (does it support dual input sources? I do not require mixing of 2 sources) the encoding format will be H.264 (720p), then will be sent to Adobe Flash Media Interactive Server for LIVE broadcasting. http://www.blackmagic-design.com/products/intensity/ I found the one above online, but I am not sure about its performance, and it has only 1 HDMI input. If I plug 2 of them into my workstation, will it conflict with each other?

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • How to switch to user perspective in Blender

    - by Cyanophage
    I've just started using Blender (v2.63) for the first time. I have used a lot of 3d modelling programs in the past but Blender's controls seem to be set up differently and it's taking a while to get used to it. The thing that is really bugging me at the moment is switching from user perspective to front/side/top views. I have my view in perspective mode and I want to switch to front view in orthographic mode and then switch back to the view I had before. It seems that the only way is to press numpad-0 to go to camera view, rotate the screen a bit to get rid of the annoying black outline and then switch it back to perspective mode. Then sometimes when I go back to front view it's in perspective mode which is annoying as you never want front view in perspective, only orthographic mode. My question: Is there a way I can be in my user view in perspective mode, switch to front/side/top views in orthographic mode and then switch back to where I was before in my user mode and be back in perspective mode?

    Read the article

  • Server certificate was missing commonName attribute in subject name

    - by Webnet
    I'm trying to setup an SSL SVN server and when I try to checkout remotely I get the error Server certificate was missing commonName attribute in subject name I did some googling and from what I can tell I need to add the IP address of the URL I'm accessing to openss.cnf with the commonName attribute like below. I did that but I still get the error. commonName = xx.xxx.xx.xx commonName_max = 64

    Read the article

  • What are the "software" requirements for a 3D video?

    - by Diogo Rocha
    Today, looking for the technical explanations about MPEG4, I saw that it can implement the VRML rendering for a 3D video. This makes me wondering about the "software" requirements to make or to see a 3D video. I mean, assuming that I have all the "hardware" requirements(3D monitor, VGA, 3D-camera, etc), what should I need to make and see 3D videos looking over the "software" side? Must I need to make it on MPEG4 instead MPEG1 or MPEG2 because of the VRML support? May I need a specifc 3D codec to open and see 3D videos?? Until today, I believed that a 3D video was just a regular/ordinary video composed of 2 "overlapping layers". PS: This is the first time I'm researching about technical explanations/references about MPEG standards and 3D videos, any help or basic explanations will help.

    Read the article

  • View Remote Desktop access logs on Win 2003

    - by NealWalters
    Is there a history log of each use of Remote Desktop. I'd like to view and audit IP addresses. I'm running a dedicated server hosted by a web hosting company. Had some problems recently, and trying to validate if anyone besides me actually logged on (i.e. if user/pass is compromised). Thanks, Neal Walters

    Read the article

  • WMI Remote connection objsWbemLocator.ConnectServer

    - by Sam
    I have an issue when connecting to remote machines using the following: Set objWMIService = objSWbemLocator.ConnectServer _ (sIP, "root\CIMV2", strUser, strPassword, "MS_409", "ntlmdomain:" + sDomain, 128) the problem is that some machines are not timing out and the process hangs. Is there a way to cancel the connect and continue with the next ip? I'm using vbscript. Thanks, Sam

    Read the article

  • Dynamips and Tap Devices, To and From the same machine

    - by Kyle Brandt
    I am setting up a dynamips/dynagen lab and am wondering if there is any way to get traffic to route out one tap devices, go into the lab, and come back to a tap device on the same machine. I have tried host specific routes as well as removing the route created when I give the tun device an ip via ifconfig. With both of these, traffic always preferes the attached devices and won't go through my lab. Any way to make this work without a separate machine or vm?

    Read the article

  • Tool to fix video that's out of sync with audio?

    - by Javier Badia
    I'm looking for (preferably free) software for Windows 7 that will allow me to fix an AVI file that has audio out of sync with the video. I tried with Windows Live Movie Maker and VirtualDub and couldn't find out how to do it (if at all possible) on both of them. If any of those can help me, instructions for that would also be nice. Background: I have a RCA-to-USB capture card, which I'm using to transfer VHS casettes and stuff from a video camera to digital format. The problem is that the audio comes out heavily distorted. So instead I connected the audio out from the VCR directly to the computer's line in. This works, but the audio is out of sync, about half a second behind the video. I could spend time trying to fix this issuee, but I think it'll be easier to simply fix the video.

    Read the article

  • Redirect XMPP with DNS

    - by Andrew Koester
    Is it possible to redirect XMPP using DNS records? I have a domain hosted on a shared host that does not have Jabber support. If possible, I'd like to still have XMPP on this domain, but have it connect to another IP (configured to support the first domain) without user intervention. I'm using ejabberd on the second server, if that helps.

    Read the article

  • setup mtu automatically after system reboot

    - by Gopalakrishnan Subramani
    I have issues with slow internet and by changing mtu works fine for me. I use Ubuntu 9.10 64bit system. I have dynamic ip address setup All the time after system bootup, I need to do the following command to make mtu setting take effect. sudo ifconfig eth0 mtu 1492 Are there any way I can set it up using startup program. As you know, sudo prompt me root password.

    Read the article

  • File association error while trying to browse to a network share in explorer or from run?

    - by ChrisFletcher
    I'm getting the below error message while trying to browse to a local share on a Windows Server 2003 machine: Windows cannot find ### this file does not have a program associated with it for performing this action. Create an Association in the folder options control panel The server is on the network, has an assigned IP address, can access the internet and is otherwise functioning normally. I realise this message can occur when opening a document or file which has no application associated with it, but I'm trying to access a share. What's going on here?

    Read the article

  • Node.js on via DynDNS

    - by Azincourt
    I have never used Node.js but since I am developing a browsergame that needs (almost) "realtime" communication, I am planning on using Node.js for this. To get started, I wanted to use a home server (normal computer) that is conntected to a dynamic IP via DynDNS. Are there the disadvantages using such a setting? What is the best way in combination with Node.js to store game status for a online game session?

    Read the article

  • The Alias directive ... will probably never match because it overlaps an earlier Alias.

    - by mmattax
    I'm getting this warning from Apache: The Alias directive in /etc/httpd/conf.d/foo.conf at line 10 will probably never match because it overlaps an earlier Alias. However the Alias overlaps on a completely different virtual host. Might this be caused because one alias is on a name-based virtual host while the other alias is on an IP-based virtual host? Everything is working fine, just the warning is a bit annoying...

    Read the article

  • Windows Server Firewall report

    - by Yves
    Hi, I am trying to get a list of all sites (ips) visited by a computer on the network. Is there a way to ask the Windows firewall to return me a report of all the sites for a specific IP address on the network (domain)? Thanks p.s: Am using Windows Server 2008

    Read the article

  • No Internet connectivity to linux container on Debian

    - by kirankumar
    I have created a linux container with debian-wheezy template. I am not able to have internet connectivity from the container. Below is my network configuration. Could some one please help me in figuring out the issue ? I can ping to the eth0 ip address in the container from the host. Similarly, i can ping from container to br0 ip address on the host. /etc/network/interfaces on host =============================== # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 auto eth0 iface eth0 inet dhcp # bridge configuration auto br0 iface br0 inet dhcp bridge_ports eth0 vethCE2 bridge_fd 0 bridge_stp off bridge_maxwait 0 ifconfig -a output on host ========================== ifconfig -a br0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e inet addr:10.0.0.11 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:615e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:422 errors:0 dropped:0 overruns:0 frame:0 TX packets:266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:174110 (170.0 KiB) TX bytes:31582 (30.8 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13017 errors:0 dropped:0 overruns:0 frame:0 TX packets:6210 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7944745 (7.5 MiB) TX bytes:1368421 (1.3 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:835 errors:0 dropped:0 overruns:0 frame:0 TX packets:835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:91148 (89.0 KiB) TX bytes:91148 (89.0 KiB) vethCE2 Link encap:Ethernet HWaddr fe:3a:43:52:14:49 inet6 addr: fe80::fc3a:43ff:fe52:1449/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:205 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2660 (2.5 KiB) TX bytes:31133 (30.4 KiB) brctl show output on host ========================== bridge name bridge id STP enabled interfaces br0 8000.080027bd615e no eth0 vethCE2 /etc/network/interfaces on container ======================================= auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.99 netmask 255.255.255.0 network 10.0.0.0 ifconfig -a output on container =============================== root@CE2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:00 inet addr:10.0.0.99 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:22ff:fe33:4400/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:198 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30121 (29.4 KiB) TX bytes:2660 (2.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2366 (2.3 KiB) TX bytes:2366 (2.3 KiB) Networking content of /var/lib/lxc/CE2/config ============================================== # networking lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethCE2 # It is fine to be commented out #lxc.network.ipv4 = 192.168.10.21/24 # Change this lxc.network.hwaddr = 00:11:22:33:44:00 Let me know if you need any other details. Thanks, Kiran Kumar

    Read the article

  • VPN Connection causes DNS to use wrong DNS server

    - by Bryan
    I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

    Read the article

  • Free desktop recording / screencasting on windows

    - by Mercer Traieste
    I'm a newbie in desktop recording and screencasting. I didn't find a suitable free application to do all the things I want it to do, but I did enjoy using jing. I would expect such an application to have these features: choose the whole desktop, a region, a window to record zoom in an area, and camera move save the recorded movie to a compressed format have basic editing tools have the mouse highlighting feature (either a sonar blip or something similar) highlight window/field on the screen, any trick will do display pressed keys/key combinations (like iphone does) So the question is: Which free desktop recording/screencasting software would you recommend on windows? It doesn't have to have all those features, just tell me your favorable experiences. Please suggest tools that would do mouse/keys/areas highlight tricks. I'm open to commercial software too, but I would prefer a free one. Thank you!

    Read the article

  • Oracle VM provisioning from dnsmasq

    - by Mircea Vutcovici
    I have Oracle VM 2.2.0 and a provisioning server (dhcp/tftp/http) based on dnsmasq. A VM that it is configure too boot from the network, is receiving the IP, but it is failing to boot. The error displayed by gPXE 0.9.3+ is: No filename or root path specified

    Read the article

  • Active X Control issue on Terminal Server 2003

    - by Saif Khan
    I have a security camera system which can be viewed remotely via a web browser. It works excellent only with IE 6 and up and requires an ActiveX control "ERViewer.ocx". Some users require to view the cameras via Windows Terminal Server, but when they try to open the link to the DVR they get the prompt ti install the ActiveX and then the browser crashes when they try to install it. I logged in as admin and got the same issue. I called the tech support of the DVR but they have no idea, in other words, the usual useless tech support. Here is what I get in the error log Faulting application iexplore.exe, version 7.0.6000.16735, faulting module ERViewer.ocx, version 1.6.0.8, fault address 0x000064d7. I am sure it could be some kinda permission getting an ocx to run in IE. What else can I tweak?

    Read the article

  • Basic video editor for AVCHD Lite files?

    - by davr
    I have a camera (Panasonic Lumix GF-1) that outputs "AVCHD Lite" files, 720p h264 in a MTS container. I saw this question that said Movie Maker in Windows 7 supports AVCHD...but I just tried, and unfortunately it does not support AVCHD Lite. Are there any free or inexpensive non-linear video editors (NLE) that can natively handle AVCHD Lite files, without requiring some 3rd party driver? If not, are there any 3rd party drivers that are especially stable? (In my experience they usually have some problems...I got AVCHD Lite loading into VirtualDub using a 3rd party plugin, but it's very slow and sometimes crashes, and seeking takes ages.

    Read the article

  • How do i setup a Window server 2008 R2 + SQL server 2008 VPS ?

    - by Spencer Lim
    I wish to deploy a trusted apps at the secured way... i got one empty VPS (no operating system) but i don't know how could i install Window server 2008 R2 and SQL server 2008 the version i got is genuine enterprise/ datacenter and sql enterprise the main purpose is used to deploy ASP.Net v4 MVC 2 and XBAP Apps + LINQ also use SQL server for my window application with someway to make it able to remote access May i know anyone here could teach me or introduce some source for me on how to setup the domain, IP, OS and feature all thing, please... i felt confuse here @.@

    Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >