Search Results

Search found 17476 results on 700 pages for 'boot manager'.

Page 299/700 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

  • Install on Acer Aspire 4752

    - by user216962
    I am at my wits end with this computer. I bought and Acer Aspire 4752 with a fully loaded version of Windows 7 on it. I prefer Ubuntu so I began to install 14.04 from USB. Got the error: [Errno 5] Input/output error This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment. So I tried a different USB stick, same error. Tried different versions of Ubuntu, got the same error. I've used startup disk creator and Unetbootin to make start USB boot devices. I can boot with the USB drive and run Ubuntu that way. I even checked the hard drive using the tools in Ubuntu. Everything was fine, except it said the hard drive was hot. I tried a different hard drive. Got same error above. I ran a test with mem86, everything was fine. No matter what I do, using the USB gives me the Errno5 error. I then switched to using DVDs. Now I keep getting an uncompression error when installing Ubuntu 14.04 or 12.04. I can't figure out for the life of me why I get nothing but errors. Can anyone help?

    Read the article

  • Data recovery on Ubuntu 11.10?! (after crashing with Seagate 320GB)

    - by Sam
    Just installed 11.10 last week and decided to transfer iTunes music (from Windows dual boot) to my Seagate 320GB. I left it in, restarted, clicked Ubuntu at the boot screen, and then it froze after a few lines of code! I think I got to 3.7086 or something before I pressed CTRL+ALT+DEL and the system restarted after another few lines of code. I am completely new to Ubuntu so after Googling, I made a live CD with 10.04, the most stable release I've heard, and I'm typing this from there now. However, when I go to mount my partition, only the Windows Vista partition (308GB) is there! It has all my Windows files but my Ubuntu 11.10 ones are nowhere to be found. I need to restore these pictures I transferred from my camera using Shotwell the other day... any help is appreciated! p.s. 11.10 has never crashed on me in my trial week, so I'm guessing it's the Seagate hard drive's fault. However, now I'm running it on 10.04 and it works fine.

    Read the article

  • Strange resolution on Ubuntu 11.10

    - by FSchmidt
    I only just installed Ubuntu 11.10, so excuse me if this question is silly ;-) I have a Fujitsu Esprimo Mobile V655, nvidia 8200 graphics, and recently installed Ubuntu 11.10 using wubi. I had to modify booting commands to include nomodeset; otherwise Ubuntu would not boot. Now I did set my screen resolution to 1280 x 720, which is the correct resolution for this screen. Still, the display seems imperfect. The font sizes seem unnatural(too large / stretched) and text is quite blurry (especially in Firefox). Could it have something to do withe the nvidia graphics driver and/or the nomodeset parameter? How can I fix this? Update: I used jockey-gtk to update nvidia to the current version. This improved the resolution dramatically (no blurriness, fonts are good). It also means that I no loger need to include nomodesetin the boot commands. However, other problems were brought up by this. It seems that certain files cannot be accessed - icon (images) are missing, some task bars are completely unstyled (grey, block-form, win97 style). I also get this error message(roughly translated from German, so may be slightly different from actual) every time I reboot: Could not apply the stored configuration for the monitor: none of the chosen modi is compatible with the available modi. I have tried nvidia-xconfig, unity --reset , no improvements. Can anyone help, please?

    Read the article

  • invitation: EMEA Hardware: Quarterly Partner Sales Update Roadshow

    - by mseika
    Dear Partner We are pleased to invite you to attend the first Oracle EMEA Hardware Quarterly Partner Sales Update Roadshow running in 10 different cities across EMEA. The 3 hour sales session will run in the afternoon in various locations. You can directly register under the "Register Now" button. Learn to Articulate the Oracle Hardware Business value proposition to your customers. Explain Oracle Hardware positioning versus the competition. Understand Oracle Hardware as best platform to run the complete Oracle-on-Oracle stack from Application to Disk Locations & Timings Date Country Location Timings 2nd July 2013   France  Paris 13.00 - 16.15 PM 2nd July 2013  Saudi Arabia  Riyadh 13.00 - 16.15 PM 4th July 2013  United Arab Emirates  Dubai 13.00 - 16.15 PM 8th July 2013  South Africa  Johannesburg 13.00 - 16.15 PM 9th July 2013  Germany  Frankfurt 14.00 - 17.15 PM 10th July 2013  Germany  Münich 14.00 - 17.15 PM 11th July 2013  Switzerland  Zürich 14.00 - 17.15 PM 15th July 2013  United Kingdom  Reading 13.00 - 16.15 PM 17th July 2013  Spain  Madrid 14.00 - 17.15 PM 18th July 2013  Italy  Milan 13.00 - 16.15 PM Price: FREE Find your location and book your seat here! We hope you will take maximum advantage of these great learning and networking opportunities and look forward to welcoming you to your nearest event! Best regards, Giuseppe FacchettiPartner Business Development Manager,Servers, Oracle EMEA Sasan MoaveniStorage Partner Sales Manager,Oracle EMEA

    Read the article

  • invitation: EMEA Hardware: Quarterly Partner Sales Update Roadshow

    - by mseika
    Dear Partner We are pleased to invite you to attend the first Oracle EMEA Hardware Quarterly Partner Sales Update Roadshow running in 10 different cities across EMEA. The 3 hour sales session will run in the afternoon in various locations. You can directly register under the "Register Now" button. Learn to Articulate the Oracle Hardware Business value proposition to your customers. Explain Oracle Hardware positioning versus the competition. Understand Oracle Hardware as best platform to run the complete Oracle-on-Oracle stack from Application to Disk Locations & Timings Date Country Location Timings 2nd July 2013   France  Paris 13.00 - 16.15 PM 2nd July 2013  Saudi Arabia  Riyadh 13.00 - 16.15 PM 4th July 2013  United Arab Emirates  Dubai 13.00 - 16.15 PM 8th July 2013  South Africa  Johannesburg 13.00 - 16.15 PM 9th July 2013  Germany  Frankfurt 14.00 - 17.15 PM 10th July 2013  Germany  Münich 14.00 - 17.15 PM 11th July 2013  Switzerland  Zürich 14.00 - 17.15 PM 15th July 2013  United Kingdom  Reading 13.00 - 16.15 PM 17th July 2013  Spain  Madrid 14.00 - 17.15 PM 18th July 2013  Italy  Milan 13.00 - 16.15 PM Price: FREE Find your location and book your seat here! We hope you will take maximum advantage of these great learning and networking opportunities and look forward to welcoming you to your nearest event! Best regards, Giuseppe FacchettiPartner Business Development Manager,Servers, Oracle EMEA Sasan MoaveniStorage Partner Sales Manager,Oracle EMEA

    Read the article

  • Can't install Linux drivers for ASUS N-13 wireless adapter

    - by jcc
    I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

    Read the article

  • Ubuntu 12.04 Freezes w/ Ethernet Unplugged + Wireless Drops (Acer Aspire 5516)

    - by Grand Master T
    Ubuntu 12.04-12.10 32/64 freezes or won't boot if the Ethernet cable is unplugged and will not hold a wireless connection. Here is my scenario... Laptop: Acer Aspire 5516 Wireless card: Broadcom BCM4312 Ubuntu 12.04 32/64 Issues Unity 3d won't load without the Ethernet cable plugged in. If I let it load with Ethernet plugged in, it will freeze once I disconnect the cable. Unity 2d will load without the Ethernet cable plugged. In Unity 2d, wireless cannot hold a connection. I can connect to a Wireless network, but when I try to use it (i.e. open a browser), it disconnects. I can reconnect by disabling wireless (uncheck Enable Wireless), re-enable wireless, and reconnect. But, it will disconnect again once I start using it. Ubuntu 12.10 Issues Since 12.10 only gives me the option to load 3d (I assume), I experience the same thing as the first issue in 12.04. Attempted Solutions Enable networking/LAN in BIOS Set LAN first in boot priority in BIOS Remove STA wireless driver (bcmwl-kernel-source) and install b43 low power driver (firmware-b43-lpphy-installer). Remove default Network Manager and install Wicd. So far, I have had no luck with fixing this issue. Does anyone have any further suggestions?

    Read the article

  • Dual Monitor 'How To' for 12.04

    - by Kim Prince
    I recently built my own PC and was delighted with the result, except for a problem with dual monitors. After having tried a few different combinations of hardware, I think what I really need is a 'how to' explanation. My motherboard is an MSI Z77MA-G45, which has an analogue, a DVI, and a HDMI port. Initially I hooked monitors up to the DVI and analogue port and it seemed to work fine. Both screens worked independently of each other, it was great. After a few days I started turning my PC off at night, and when I tried to turn it back on it would boot into the terminal mode. I would have to turn one of the monitors off and after rebooting a few times, it would eventually boot into an X Window session. Occasionally I would see an error relating to Xorg. I upgraded the motherboard BIOS but that made no difference. Eventually, I installed a graphics card - an NVIDIA GeForce GT 520. Now it seems that my on board graphics have been disabled completely, and I am reliant on the graphics card. Furthermore, the graphics card seems to only recognise one screen at a time. (The first time I rebooted with both plugged in, it flashed up a message saying that it was auto-selecting DVI). Anyhow, I think I need some 'how to' (or perhaps 'where to'), from here. For example, is X Windows configuration the next place to look? And how do I go about configuring X Windows? (Note that in Systems Settings it says my graphics driver is 'unknown', and when I ask it to detect monitors, it sees only the one!)

    Read the article

  • Are Windows partitions gone?

    - by Gigili
    I had Windows 7 on my laptop (factory setting), because of some performance issues, I decided to use recovery options to restore it to its factory condition but I don't know what has happened or what I have done that the whole operating system was gone after playing around with recovery options from the boot menu. I couldn't find Windows, so I installed Ubuntu 11.04 on my laptop. Last time I had Ubuntu on it, it was not really compatible with laptop's configuration and I had a bit of problems trying to do normal tasks I used to do on Windows. Now I want to make sure that Windows and its drivers are gone so that I can try to install a newer version of Ubuntu or Windows. I tried the command sudo fdisk -l And the result shown was: myaccount@myaccount-VPCS116FG:~$ sudo fdisk -l [sudo] password for myaccount: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00025b5f Device Boot Start End Blocks Id System /dev/sda1 * 1 38409 308515840 83 Linux /dev/sda2 38409 38914 4052993 5 Extended /dev/sda5 38409 38914 4052992 82 Linux swap / Solaris Disk /dev/dm-0: 4150 MB, 4150263808 bytes 255 heads, 63 sectors/track, 504 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa668cfe8 Disk /dev/dm-0 doesn't contain a valid partition table Is it gone? If not, what command should I try to have access to Windows partitions? Thank you.

    Read the article

  • Error while reomving the new kernel 2.6.37

    - by Tarek
    Hi! I tried to install the new kernel but something went wrong and I'm trying to remove it now. The error massege is: mhd@Tarek-Laptop:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: linux-image-2.6.37-020637-generic 0 upgraded, 0 newly installed, 1 to remove and 9 not upgraded. 1 not fully installed or removed. After this operation, 111MB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 188780 files and directories currently installed.) Removing linux-image-2.6.37-020637-generic ... Examining /etc/kernel/postrm.d . run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.37-020637-generic /boot/vmlinuz-2.6.37-020637-generic /etc/default/grub: 33: Syntax error: EOF in backquote substitution run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 2 Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-2.6.37-020637-generic.postrm line 328. dpkg: error processing linux-image-2.6.37-020637-generic (--remove): subprocess installed post-removal script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.37-020637-generic E: Sub-process /usr/bin/dpkg returned an error code (1) The previous unsloved error is on this bug.

    Read the article

  • Oops! installer misses a lib during OIF 11g install under some conditions

    - by user12674042
    If you installed OIF 11g on OEL 6.2 64bit and passed all the interesting gotchas but got stumped by this error in the WLS admin logs, and Enterprise Manager refuses to start correctly after what appeared to be a full successful install and configuration:  ...  <User defined listener oracle.sysman.eml.app.ContextInitializer failed: java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException. java.lang.NoClassDefFoundError: HTTPClient/ProtocolNotSuppException     at oracle.sysman.eml.app.ContextInitializer.contextInitialized(ContextInitializer.java:1035) ... Caused By: java.lang.ClassNotFoundException: HTTPClient.ProtocolNotSuppException     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:297)     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270) ... <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'em'. weblogic.application.ModuleException:     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520) ... The problem is the installer fails to properly place a required jar (http_client.jar) in the appropriate location for your WLS domain.   Assuming you have Oracle DB installed on the same server, just copy the jar to the lib folder in your domain, e.g. if your domain is IDMDomain and middleware install location is /u01/Middleware then cp /u01/app/oracle/product/11.2.0/db_1/oui/jlib/http_client.jar \   /u01/Middleware/user_projects/domains/IDMDomain/lib and restart your admin WLS.  Enterprise Manager will start to work.  Hopefully this will save others some time while on the bleeding edge...

    Read the article

  • How To Use the Restore Partition to Break Into a Mac Running OS X Lion

    - by Justin Garrison
    It’s trivial to break into a Mac using an OS X boot disk, but new Macs use a restore partition for OS installations. Here’s how you can use that partition to reset a user password and break into a Mac. All laptops that come with OS X 10.7 “Lion” or laptops that were upgraded to Lion have a restore partition for easy OS recovery. This easy-to-use recovery partition also opens up hackers to break into your Mac without needing any additional tools. To reset a user password on a Mac with Lion you first need to restart the computer and hold the Command+R (?+R) keys. When the gray Apple logo shows up on the screen you can release the keys. Your computer should automatically boot into the recovery partition. Start by selecting your language and then go to Utilities -> Terminal in the menu. How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

    Read the article

  • Getting file system free space

    - by Fred Riley
    This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

    Read the article

  • How to avoid to be employed by companies which are candidates to DailyWTF stories?

    - by MainMa
    I'm reading The Daily WTF archives and especially those stories about IT-related companies which have a completely wrong approach of software development, the job of a developer, etc. Some stories are totally horrible: a company don't have a local network for security reasons, another one has a source control server which can only be accessed by the manager, etc. Add to it all those stories about managers who don't know anything about their work and make stupid decisions without listening to anybody. The thing is that I don't see how to know if you will be employed by such company during an interview. Of course, sometimes, an interviewer tells weird things which gives you an idea that something goes very wrong with the company (in my case, the last manager said I should work 100% of my time through Remote Desktop, connected to on an old and slooooow machine, because "it avoids several people to modify the same source code"; maybe I should explain him what SVN is). But in most cases, you will be unable to get enough information during the interview to get the exact image of a company. So how to avoid being employed by this sort of companies? I thought about asking to see some documents like documentation guide or code style guidelines. The problem is that I live in France, and here, most of the companies don't have those documents at all, and in the rare cases where those documents exist, they are outdated, poorly written, never used, or do force you to make things that don't make any sense. I also thought about asking to see how programmers actually work. But seeing that they have dual screens or "late-modern-artsy-fartsy furnishings" doesn't mean that they don't have people making weird decisions, making it impossible to work there. Have you been in such situations? What have you tried? Have it worked?

    Read the article

  • How do I uninstall GRUB?

    - by ændrük
    A hard drive that I use only for data storage still has GRUB from past Ubuntu installations. How can I remove GRUB from it without harming the rest of the drive's data? Background I occasionally move the data drive between computers with various boot order configurations, so I would like it to be non-bootable in order to avoid having to accommodate it in each computer's BIOS settings. When I power on a computer while only the data drive is attached, the following appears: error: no such device: fdf38dd4-9e9d-479d-b830-2a6989958503. grub rescue> I can confirm from old backups of /etc/fstab that this was the UUID of a root partition that I recently reformatted and which no longer exists. Here's the the data drive's partition table and raw master boot record. Please note that I'm not interested in workarounds that don't answer my primary question. I can think of several ways to work around this issue, but it bothers me on principle that I don't know how to directly resolve it. Every installation procedure should have a counterpart uninstallation procedure.

    Read the article

  • Graphical glitches on grub and ubuntu desktop

    - by Klyn
    I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

    Read the article

  • Ubuntu 14.04 install fails with Via S3 UniChrome Pro graphics

    - by WizardNo.7
    I am trying to install Ubuntu 14.04 on a Fujitsu Siemens Amilo Pro laptop(it's quite old yes, has about 30GB Hard Drive and I think 192mb of RAM) which currently has Windows XP installed (which I'd like to keep for the time being). I have downloaded the 32-bit Desktop ISO and used unetbootin to create a Live USB for this laptop. When I boot from USB, I arrive at the unetbootin Grey and Blue menu and pick either "Try Ubuntu without installing", or "Install Ubuntu". The menu goes away and an Ubuntu loadscreen showing UBUNTU and four dots which progressively change between white and orange. At about the second color changing cycle a white underscore symbol appears next to the fourth dot and flickers. There is some leftover text from the kernel boot still visible, but there is no graphical desktop. After this I have to hard reboot or shut-down. $ lshw -c video *-display UNCLAIMED description: VGA compatible controller product: CN700/P4M800 Pro/P4M800 CE/VN800 Graphics [S3 UniChrome Pro] Vendor: VIA Technologies, Inc. physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 32 bits clock: 66MHz capabilities: pm agp agp-2.0 vga_controller bus_master cap_list configuration: latency=64 mingnt=2 resources: memory:f0000000-f3ffffff memory:d1000000-d1ffffff

    Read the article

  • Impossible quandrary involving UCK, graphics card, and Nvidia drivers

    - by InkBlend
    I have a computer that I want to install Ubuntu on. It is an older gaming computer with a Nvidia graphics card. When I attempt to boot any unmodified Linux distribution onto it, I get a "Boot error" message, which I assume is because the computer uses a discrete graphics card, which the Linux kernel does not have support for. Ordinarily, that would not be a problem, as I would just plug the monitor into the VGA port built in to the motherboard. However, this particular model of motherboard does not have an on-board graphics connector, so I am stuck with using the graphics card connection. That further would not be a problem; all I would have to do would be to use UCK to create a customized Ubuntu image that included the graphics drivers. Except for the fact that the Nvidia Linux drivers must be installed on a computer with a Nvidia graphics card present. So while using UCK, the driver installer fails with a message stating that there is no Nvidia graphics card present. How do I get Ubuntu on my desktop computer?

    Read the article

  • Recover Lost data/partition

    - by Kaleido
    This is what happened: I was running 12.04.1 and wanted to install 12.10. upgrade, but a fresh install. When setting up my computer I anticipated for this by dividing my 640GB HD in following partitions: 1. 60 GB for Ubuntu, boot 2. 576 GB for data, mountpoint /home 3. swap, 4GB The idea was to manually select the correct partition in the installer but I got distracted for a moment and selected the wrong option. Result: The installer started repartitioning the entire HD. When I noticed this I interrupted the installer, but upon reboot it was clear that I was too late, no OS to boot to. I booted from a Gparted Live CD to see if I could recover the data on my previous /home-partition, but it's gone. Is there any way to recover the lost data? I searched around and read alot about Testdisk, but in all the tutorials I've seen, the set-up has been much easier than what I'm facing. I've not only lost my partition table, it's been replaced. Thanks in advance for any ideas that might help! If extra info is needed, please specify and I will do my best to provide.

    Read the article

  • No audio in Google Chrome

    - by Z9iT
    I started with Ubuntu 12.04 Minimal. Then installed only 3 utils sudo apt-get install xorg xinit google-chrome-stable alsa-base alsa-utils alsa-oss I have added google-chrome to .xinitrc file. Used sudo alsamixer to unmute everything using M. Also I am able to hear sound when I run this independently in a terminal sudo aplay /usr/share/sounds/alsa/Front_Center.wav However Google Chrome is not giving any sound output be it on youtube or the same file (/usr/share/sounds/alsa/Front_Center.wav) opened by browsing in chrome. UPDATE : the moment i install some Desktop (display) Manager like gnome or lxde and launch chrome then, the audio is perfect success. However if i kill the xsession and the desktop manager (lxde) AND then start with loading only the chrome (without DM) then again i loose the sound. This makes me wonder that there is something which is not allowing the sound to be loaded into chrome directly, but once the session like lxde loads, then it works flawless. I am thinking that i should rather ask, how to authorize google-chrome to use sound software? Miscellaneous : I am surprised to know that I cannot start google-chrome by sudo command (it asks to be a normal user) && that i cannot start alsamixer as a normal user (i must use sudo alsamixer ) May someone please help what i need to do so that google chrome speaks????

    Read the article

  • Why am I getting this error while installing gnome?

    - by Sreehari Rajendran
    i have raring ringtail. I installed gnome a couple days ago. I try to install extensions but the site says I don't have the latest version. I type the command sudo apt-get install gnome-shell and I get this error Reading package lists... Done Building dependency tree Reading state information... Done gnome-shell is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 138 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up initramfs-tools (0.103ubuntu0.7) ... update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.8.0-25-generic cp: cannot stat ‘/module-files.d/libpango1.0-0.modules’: No such file or directory cp: cannot stat ‘/modules/pango-basic-fc.so’: No such file or directory E: /usr/share/initramfs-tools/hooks/plymouth failed with return 1. update-initramfs: failed for /boot/initrd.img-3.8.0-25-generic with 1. dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: initramfs-tools E: Sub-process /usr/bin/dpkg returned an error code (1) why?

    Read the article

  • nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

    - by rlemon
    I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

    Read the article

  • Plugged in, not charging&ndash;Windows 7

    - by Kelly Jones
    Just a quick post on something I ran into lately with my Dell Precision M4500 laptop (monster laptop!).  I noticed the little icon in the system tray for the power options was stating that it was “plugged in, not charging”.  I don’t know why it was stating this, but I quickly found a fix for it on the net. I found the fix in this forum on CNET.  Here’s the fix: In order to correct problems with the battery's power management software, follow the steps below. 1. Click Start and type device in the search field, then select Device Manager . 2. Expand the Batteries category. 3. Under the Batteries category, right-click the Microsoft ACPI Compliant Control Method Battery listing, and select Uninstall . WARNING: Do not remove the Microsoft AC Adapter driver or any other ACPI compliant driver. 4. On the Device Manager taskbar, click Scan for hardware changes . Alternately, select Action > Scan for hardware changes . Windows will scan your computer for hardware that doesn't have drivers installed, and will install the drivers needed to manage your battery's power. The notebook should now indicate that the battery is charging.   And it did work.

    Read the article

  • Re-installing Ubuntu without losing files, how to?

    - by moraleida
    Sometime back i bought a second PC to serve as my backup machine, but i've never managed to have it as i would like. Now i want to start over, but i've messed so much with it's disks that i'm kinda afraid to lose something on the way, thus this question. Right now, I have a 1Tb disk partitioned like this (as per GParted): /dev/sda1 (ext4) 346.12Gb - Is almost full, has an old install of Ubuntu 11.10. It no longer boots, ever since i installed Windows7 on /sda3. Everything that matters to me is tucked into /var/www/ all the rest can just go. /dev/sda2 (ext4) 196.45Gb - has an old install of 12.04 and nothing important, it's pretty much empty and also doesn't boot. /dev/sda3 (ntfs) 377.97Gb - is my boot partition with Windows 7, some important files and I'd like to keep it untouched. /dev/sda4 (extended) 10.97Gb - was created when i first installed Ubuntu, i think. In my ideal world, I'd like to safely reinstall Ubuntu from the 12.04 liveUSB and merge sda1 and sda2 without losing any files. Is that possible? How?

    Read the article

  • Twinview broken on upgrade to ubuntu 10.10

    - by mapkyca
    I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

    Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >