Search Results

Search found 1113 results on 45 pages for 'ati'.

Page 3/45 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Which driver for ATI Radeon 9600 All-In-Wonder

    - by vanja
    I'm very new to Ubuntu and Linux for that matter, and wondering if anyone there found proper drivers for ATI Radeon 9600 All-In-Wonder. The system (Ubuntu 12.04) doesn't let me change screes resolution and it's not recognizing the card.. I found this page http://wiki.cchtml.com/index.php/Hardware that shows some info but i'm really confused where to start and if it's possible at all to make everything work. Any help would be really appreciated. Thanks in advance!! -vanja

    Read the article

  • Doesn't boot after installing fglrx for ati 5650

    - by elivanja
    Hi, I'm a complete noob here, I recently bought an HP 3161 with an ATI 5650 hd card, when I installed 10.04 LTS everything was working fine until I was prompted to activate proprietary driver fglrx, after I did this I couldn't reboot (not even in recovery mode) until I reinstalled 10.04, what can I do? I would appreciate any help since I haven't been able to find anyone with the same problem, thanks.

    Read the article

  • Dual monitor ATI hd 4350 (1GB PCI-e), ubuntu 12.04 (pear Linux) Do I need the ATI driver or open source?

    - by Geeve
    I think I covered it in the title, Right now both monitors are mirrored (both 19" at 1440x900). I guess what I need to know is do I need the ATI proprietary driver or will the open source driver from Ubuntu (additional drivers) work? I want to expand the desktop between the two monitors. Still finishing install and running updates now, I just wanted to gather all documentation and downloads prior to doing what is necessary. Thanks Geeve

    Read the article

  • Graphical driver 13.10 ATI RV630

    - by Michael Cephalus
    I started updating the distro from 13.04 to 13.10. Then I got my hands on a Radeon HD 2600. I installed the RV630 compatible Catalystdriver from the official webpage. Then xserver crashed everytime I opened a browser or vlc fx. I took notice that there was no driver listed in configuration underneath. michael@statubtunu:~$ lshw -c video WARNING: you should run this program as super-user. *-display UNCLAIMED description: VGA compatible controller product: RV630 PRO [Radeon HD 2600 PRO] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:e0500000-e050ffff ioport:1000(size=256) memory:e0000000-e001ffff i installed additional drivers from jockey and the ubuntu softwarecenter ati-driver. though that only made it to crash xserver completely and when i type: michael@statubtunu:~$ sudo startx X.Org X Server 1.14.3 Release Date: 2013-09-12 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu Current Operating System: Linux statubtunu 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 17:26:33 UTC 2013 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-13-generic root=UUID=8fb2e395-0ea2-4f45-ac66-225696b7ce2c ro quiet splash vt.handoff=7 Build Date: 15 October 2013 09:23:29AM xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.30.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 12 18:50:02 2013 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Initializing built-in extension Generic Event Extension Initializing built-in extension SHAPE Initializing built-in extension MIT-SHM Initializing built-in extension XInputExtension Initializing built-in extension XTEST Initializing built-in extension BIG-REQUESTS Initializing built-in extension SYNC Initializing built-in extension XKEYBOARD Initializing built-in extension XC-MISC Initializing built-in extension SECURITY Initializing built-in extension XINERAMA Initializing built-in extension XFIXES Initializing built-in extension RENDER Initializing built-in extension RANDR Initializing built-in extension COMPOSITE Initializing built-in extension DAMAGE Initializing built-in extension MIT-SCREEN-SAVER Initializing built-in extension DOUBLE-BUFFER Initializing built-in extension RECORD Initializing built-in extension DPMS Initializing built-in extension X-Resource Initializing built-in extension XVideo Initializing built-in extension XVideo-MotionCompensation Initializing built-in extension SELinux Initializing built-in extension XFree86-VidModeExtension Initializing built-in extension XFree86-DGA Initializing built-in extension XFree86-DRI Initializing built-in extension DRI2 Loading extension GLX ERROR: could not insert 'fglrx': No such device (II) [KMS] drm report modesetting isn't supported. (EE) (EE) Backtrace: (EE) 0: /usr/bin/X (xorg_backtrace+0x49) [0xb77780b9] (EE) 1: /usr/bin/X (0xb75d8000+0x1a3e24) [0xb777be24] (EE) 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb75b540c] (EE) 3: /usr/bin/X (xf86findOption+0x2a) [0xb7681daa] (EE) 4: /usr/bin/X (xf86findOptionValue+0x23) [0xb7681f43] (EE) 5: /usr/bin/X (0xb75d8000+0x7ebfd) [0xb7656bfd] (EE) 6: /usr/bin/X (xf86ProcessOptions+0x37) [0xb7657507] (EE) 7: /usr/lib/xorg/modules/libvbe.so (vbeDoEDID+0xe7) [0xb5eb8647] (EE) 8: /usr/lib/xorg/modules/drivers/vesa_drv.so (0xb5ee7000+0x287c) [0xb5ee987c] (EE) 9: /usr/bin/X (InitOutput+0xb23) [0xb7659c33] (EE) 10: /usr/bin/X (0xb75d8000+0x2a30b) [0xb760230b] (EE) 11: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf5) [0xb71ba905] (EE) 12: /usr/bin/X (0xb75d8000+0x2a908) [0xb7602908] (EE) (EE) Segmentation fault at address 0x5 (EE) Fatal server error: (EE) Caught signal 11 (Segmentation fault). Server aborting (EE) (EE) Please consult the The X.Org Foundation support at for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. This is what comes, but no GUI. Is there any way to deal with this?

    Read the article

  • Problem with ATI Radeon HD 7670M on Ubuntu 12.10

    - by Aniket
    I updated from Ubuntu 12.04 to 12.10 a couple of days back. My machine is a Dell Inspiron 15R with a Radeon HD 7670M Graphic Driver. When I was using 12.04, I was able to install the propriety driver using the notification you usually get. But after the upgrade, the graphic driver is not getting installed. I am not getting the notification to install the driver And I also tried to follow the steps given - What is the correct way to install ATI Catalyst Video Drivers (fglrx)? I tried the legacy as well as the usual installation procedure Both ways I failed and my graphics went to the fallback, disabling Unity Note: My laptop is getting heated to 80 degrees and can shut down at any point. Please help.

    Read the article

  • Cant get lm-sensors to load ATI Radeon temp and fan or output all settings

    - by woody
    New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get the ATI Radeon sensors working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

    Read the article

  • Probelm with ATI catalyst drivers in ubuntu 13.10

    - by Raja
    Recently I've installed dual boot ubuntu 13.10 alongside windows 8. My Laptop is Dell Inspiron 15, with AMD Radeon HD 7670 Video Card. Without fglrx my battery is draining to 1:30 hrs from 3:30hrs (In Ubuntu 13.04 but very slow booting ) so I installed fglrx using What is the correct way to install ATI Catalyst Video Drivers (fglrx)? But the problem is as you all know, Black Screen after logging into ubuntu. Tried so many solutions for this like reinstalling unity , ubuntu-desktop , compizconfig , etc.. but none helped except removing fglrx* completely. (But I need them very badly due to battery) Assuming that all hope is lost., Posting here as a final try.! Will be highly greatfull for those who helped :) PS : For those who think this question is a duplicate., Though the question may be a duplicate, but the answer is not! (so give me a assured solution for this problem before flagging this as duplicate., Kindly understand my frustation) Thank You !

    Read the article

  • ATI graphics card, with gnome shell on Ubuntu 11.10, screen flickers

    - by bioShark
    After installing gnome shell, without any problem, after log in the fonts are missing and it looks like crap...nothing is readable. Don't want to make it a double post, because my issue is similar to the one from this question but for me the problems have not been solved properly. After running the commands from that post, and installing the latest AMD 11.10 driver, the Gnome shell display issues have been solved. But each time I move the mouse in the upper left corner, to bring up the applications...my entire screen flickers. Without the applications been displayed, everything looks fine. Hardware: ATI HD4870, Intel Q6600.

    Read the article

  • Boots to a totally blank screen after I installed some ATI Radeon card updates

    - by baboonWorksFine
    I am using Ubuntu 10.04 LTS, dual boot with win7 on ThinkPad T400, I followed Ubuntu update hints and installed some update for my ATI Radeon graphic card, but when I boot to Ubuntu(means I can still load GRUB), the tragedy happened, the screen goes to blank and no matter what key stroke, I can not get any responds, I try to go to text terminal, but impossible! However when I hit the power button, the computer would pop out the Ubuntu shutdown screen briefly and shut down. I figure out I should delete the updates package of my graphic card, but I don't even get a chance to go to text terminal, please help me!

    Read the article

  • ATI graphics card, with gnome shell, screen flickers

    - by bioShark
    After installing gnome shell, without any problem, after log in the fonts are missing and it looks like crap...nothing is readable. Don't want to make it a double post, because my issue is similar to the one from this question but for me the problems have not been solved properly. After running the commands from that post, and installing the latest AMD 11.10 driver, the Gnome shell display issues have been solved. But each time I move the mouse in the upper left corner, to bring up the applications...my entire screen flickers. Without the applications been displayed, everything looks fine. Hardware: ATI HD4870, Intel Q6600.

    Read the article

  • For some reason I can't get ATI FGLRX Drivers to support 3D acceleration on Ubuntu 12.04

    - by HungryMan
    I have an ATI 5650m and I've had 0 issues with 3D Acceleration in the past. I had to reinstall Ubuntu entirely, and now with the 12.6 drivers I get - One or more tools required for installation cannot be found on the system I can't seem to solve this issue. I installed the FGLRX drivers through the "alternate command line" guide on the Ubuntu Wiki including the instructions for getting 3D support. They seem to install but I get an error with vainfo libva: VA-API version 0.32.0 Xlib: extension "XFree86-DRI" missing on display ":0.0". libva: va_getDriverName() returns 0 libva: Trying to open /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so libva error: /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so init failed libva: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit I have tried help here: http://ubuntuforums.org/showthread.php?t=2014440 It's a bit frustrating as I can do basically nothing without 3D support. I can't use super + direction or super + w or even configure the Unity bar to be 32px. If anyone could help I'd appreciate that.

    Read the article

  • Can't install ATI proprietary drivers in 12.10

    - by EApubs
    I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

    Read the article

  • Do I need the ATI driver or open source for dual monitor setup (ATI HD 4350 - 1GB PCI-e) in Pear Linux 12.04?

    - by Geeve
    I think I covered my question in the title. Right now both monitors are mirrored (both 19" at 1440x900). I guess what I need to know is do I need the ATI proprietary driver or will the open source driver from Ubuntu (additional drivers) work? I want to expand the desktop between the two monitors. Still finishing install and running updates now, I just wanted to gather all documentation and downloads prior to doing what is necessary. Any help will be greatly appreciated.

    Read the article

  • Ubuntu 12.10 ATI Driver 12.11 fails after compiz and xorg update

    - by Lukasz W.
    I updated my system via the package manager from Unity and next restart was just blackness. After being here: http://linux.hootip.com/amd-catalyst-12-11-beta-fix-and-installation-the-drivers-on-ubuntu-12-11/ I had the Catalyst 12.11 Beta driver installed. I checked my /var/log/apt/history.log and the update I received was of compiz and xorg packages. I tried to get latest release info, but all I get from their pages are commit info; I can't tell what was n the package update I got served. Anyone knows what was in the latest xorg/compiz release that broke the driver? Which driver should I use now? For completeness this is how I got the system back to boot (probably lame and not elegant): Boot with GRUB selection "More Ubuntu options (or sth like that), From secondary screen select 3.5.0-19 with boot options, When system prompts on stuff you'd like to do, select "root" - Drop to root shell, There: # mount -o remount,rw / # mv /etc/X11/xorg.conf /etc/X11/xorg.conf.failed # /usr/share/ati/fglrx-uninstall.sh # reboot This got be back on my feet.

    Read the article

  • Ubuntu 13.10 AMD/ATI proprietary driver slow boot time, lengthy login/logout delays

    - by NahsiN
    Ubuntu 13.10 is causing me major headaches with my AMD/ATI HD 5770 GPU. Below is a list of problems I am currently encountering. 1) The boot time is extended by at least 25s after installing catalyst 13.4. Using open source radeon drivers, my boot time till the login screen is ~10s. With catalyst 13.4 installed, the boot time increases to ~35s. This was not the case in Ubuntu 13.04, 12.10 or 12.04. I have done the driver installation manually (instructions from wiki.cchtml.com) and using software center and there is no difference. I have not tried the catalyst 13.8 beta driver. 2) After manual installation of catalyst 13.4, I get stuck at a black screen after logging in. I have to purge fglrx to resolve the problem. I tried sudo amdconfig --initial -f but it didn't help. 3) The delay between logging in and unity being displayed is ~10-15s for BOTH open source and proprietary drivers. During the delay, it's just a black screen. Whenever I logout, there is again a ~10-15s delay with the login screen appearing stuck before lightdm allows me to enter my password again. This is ridiculous! Yes, I could stick with open source radeon drivers but I would like to install Steam and play my Valve collection on the machine. Is anybody else encountering similar issues?

    Read the article

  • Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

    - by Giuseppe Della Corte
    I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

    Read the article

  • ATI HD5450 w/ Ubuntu 14?

    - by Oliwb
    So, I'm running Ubuntu 12.04 right now. Last night I realised that I'm way behind as we're up to 14! Decided to run the updater and figured I'd take the path of least resistance (but lengthy choice) of going 12.04 - 12.10 - 13.xx - 14.xx. So I download the first packet and then get an error message about my graphics card perhaps not working in 12.10. Now part of the reason I was looking to upgrade is because I get (and have always had) this strange occasional flickering - now that I have two screens it's just on the second monitor.....oddly this is not the same port that was giving issues before). The graphics card is an ATI Radeon HD5450 and I have the Catalyst (I think it's 13 or 14) driver installed - last night. It could be that the graphics card has never worked properly...I bought the PC new and with an "upgraded" video card and it's always suffered with this flicker. I just figured that the drivers weren't right or something. So I have 3 questions: 1) is my video card broken or is the driver letting it down and causing the flicker? 2) will it be able to handle the upgrade to 14 via 13? Or should I cut my losses and get something newer? 3) if I should get something newer....what should I get ( Thanks in advance....

    Read the article

  • Cannot install "ATI/AMD proprietary FGLRX graphics driver" (SystemError)

    - by Fisherman John
    I have just installed a fresh copy of 12.04.1 64bit. I formatted my PC completely and enabled updates during the installation. After the installation was complete, I went on updating my software. However, when I wanted to install the additional drivers using the Additional Drivers tool (namely "ATI/AMD proprietary FGLRX graphics driver"), it gave me this error: SystemError: E:Unable to correct problems, you have held broken packages. The same error shows up if I try installing the post-release updates driver. Installing the drivers from the terminal results in this output: XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." I get this using "sudo apt-get update": http://pastebin.com/AWAtDXjY But "sudo apt-get install fglrx" still get me this error: http://pastebin.com/RYM55bVN & "sudo apt-get -f install fglrx" gives me this error: http://pastebin.com/xxekajvP Any help would be greatly appreciated. (Please note that I'm new to Linux, coming directly from Windows. I have tried Ubuntu twice or so before, but it was not for a long period of time. The drivers got installed smoothly the few times I've tried Ubuntu, but post-release updates never worked for me.) [I am going to work now, so I can only answer from my phone. Can't really test any new solutions you may give me until ~10 hours from now on. Maybe more.] @stonedsquirrel When I try to run that command, I get this error: "XXXXXX:~$ sudo apt-get install fglrx [sudo] password for XXXXX: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: fglrx : Depends: lib32gcc1 but it is not going to be installed Depends: libc6-i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages." ie. I get the same error. ( I am Fisherman John, dunno how to login & thereby respond to your comment again _ )

    Read the article

  • Cant get lm-sensors to load ATI Radeon temp or fan

    - by woody
    New to Linux and having minor issues :/ . I followed this guide initially but did not recieve the proper output and did not show my ATI Radeon HD 5000 temp or fan speed. Then used this guide, same problems exhibited. No issues installing and no errors. I think its not reading i2c for some reason. The proprietary driver is installed and functioning correctly according fglrxinfo. I can use aticonfig commands and view both temp and fan. Any ideas on how to get it working under 'sensors'? When i run 'sudo sensors-detect' this is my ouput # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200) # System: LENOVO IdeaPad Y560 (laptop) # Board: Lenovo KL3 This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... No AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 15h power sensors... No Intel digital thermal sensor... Success! (driver `coretemp') Intel AMB FB-DIMM thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... Yes Found unknown chip with ID 0x8502 Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-i801' for device 0000:00:1f.3: Intel 3400/5 Series (PCH) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: #----cut here---- # Chip drivers coretemp #----cut here---- If you have some drivers built into your kernel, the list above will contain too many modules. Skip the appropriate ones! Do you want to add these lines automatically to /etc/modules? (yes/NO) My output for 'sensors' is: acpitz-virtual-0 Adapter: Virtual device temp1: +58.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +56.0°C (high = +84.0°C, crit = +100.0°C) Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C) Core 2: +58.0°C (high = +84.0°C, crit = +100.0°C) Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C) and my '/etc/modules' is: # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. lp rtc # Generated by sensors-detect on Fri Nov 30 23:24:31 2012 # Chip drivers coretemp

    Read the article

  • How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

    - by rewbs
    I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

    Read the article

  • How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

    - by rewbs
    Hi all, I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

    Read the article

  • Please Help with ATI Radeon 4250 and Xinerama

    - by Luis Enrique
    I am using ubuntu 11.10 fresh install and I am having problems making the second screen to work, I remember before I was able to do it by extending the desktop to a larger number like 3840 X 1080 but since I am new I completely forgot how to do it, Now I have a philips 230 E monitor full 1920 X 1080 and a Toshiba tv HDMI and I want to activate the second monitor to be able to use Xinerama but I don't know how to go about this, I want to keep the Phillips as a primary monitor since it's the smaller one and use the TV from time to time to play videos movies and presentations. I installed all the additional drivers and don't know what else to do. I would prefer if I can use a list of exact commands to copy and paste onto the terminal since that is all I know how to use LOL . Thank you so much for your help. If you need more details of my mother board or video card or cpu just ask thank you. Luis

    Read the article

  • Fonts look worse after ATI proprietary driver install

    - by Utkonos
    I've installed the (almost) current version of the Catalyst 12.4 proprietary driver (8.960). I used the version that is in precise's restricted repository with the following command: sudo apt-get install fglrx fglrx-amdcccle After the install, I am encountering the following two problems: The splash screens for Kubuntu look crooked like they're the wrong resolution (not a big deal; who really cares). All the fonts are lighter, more pixelated (very annoying). This is what it looks like with the open source driver included in 12.04: http://imgur.com/1DxRj And this is what it looks like with the Catalyst driver: http://imgur.com/x6BpP I realize that it is hard to tell the difference with these two screen captures, but it really is quite different and annoying on my monitor. With the open source drivers the fonts look solid and clean the way they are supposed to. With the proprietary drivers the fonts looks fuzzier and more harsh. The only reason I need to use the proprietary driver is to play Minecraft. It does not run under the open source driver, unfortunately. What can I do to fix the fonts and get the proprietary driver to work as well as the open source driver?

    Read the article

  • How to stop fan running always on Asus P8P76LE motherboard with ATI Radeon HD6900

    - by Chris Good
    I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >