Search Results

Search found 60319 results on 2413 pages for 'display name'.

Page 3/2413 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Misaligned Display on Resume

    - by Shaun Killingbeck
    I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • 11.10 7600gt display error

    - by Justin Ray
    So i used to use Ubuntu back when it was 8 and it never gave me any problems but recently i did a fresh install of 11.10. But now when i install the N-Vidia restricted drivers i cant change my screen resolution from 640x480, the display menu says "can not detect display". There is no way to navigate the screen really because the windows don't work and I'm not very command prompt keen please help i love Ubuntu!

    Read the article

  • Display artifacts under Ubuntu 12.10

    - by James McMahon
    I am getting some display artifacts under a fresh install of 12.10. (Open image in an another tab to get the full effect) Anyone have any idea what might be going on here or a possible solution? My first assumption was display driver, but I've been have some difficulties getting the Nvidia binary driver to work. So I wanted to check for other possible solutions before I spend a lot of time messing with getting that to work.

    Read the article

  • Power manager keeps shutting down the display

    - by david25
    I'm probably missing something here. I'm using the default Ubuntu power manger, I set it up like this: On AC: no screen dimming when idle, never put computer to sleep, never put display to sleep. On battery: I kept the default settings. Still, Ubuntu does whatever it likes, and after 15 min it puts the display to sleep. Does anyone have the same problem and found a way to solve it? I'm using an Eee PC with Ubuntu 10.10 Desktop.

    Read the article

  • external monitor can't display max resolution

    - by mp94
    I had been using an external monitor, an old Dell Inc. 19" with Ubuntu 14.04 for a while now, The resolution it displayed at was something like 1366x768 or 1366x1024, I can't remember exactly which one it was. However, one day when I restarted my computer, I can no longer get that resolution on the external display, and can now display a max resolution of 1024x768. Does anyone know why this might happen all of a sudden? I think it was after running a system update.

    Read the article

  • Display particular data into a file

    - by Avinash K G
    I'm new to Ubuntu and have been using it for a couple of weeks now. Recently I encountered a problem where in I had to display a particular data on to a file. Here is the output displayed on the terminal. Potential vulnerability found (CVE-2009-4028) CVSS Score is 6.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2009-4030) CVSS Score is 4.4 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2009-5026) CVSS Score is 6.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0075) CVSS Score is 1.7 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0087) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0101) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0102) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0112) CVSS Score is 3.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0113) CVSS Score is 5.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0114) CVSS Score is 3.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0115) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0116) CVSS Score is 4.9 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0118) CVSS Score is 4.9 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0119) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0120) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0484) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0485) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0490) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0492) CVSS Score is 2.1 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0540) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0553) CVSS Score is 7.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0574) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0583) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1492) CVSS Score is 7.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1506) CVSS Score is 2.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1521) CVSS Score is 6.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) I intend to display the Potential vulnerability found field and the corresponding score alone. There seems to be about 9995 entries and I would like to display all of them. I have been using this command as of now awk '/CVSS Score is/ < /Potential vulnerability found/' output.txt but this seems to display only the name of the vulnerability or the score. How do I display this in file(text,excel) such that all the vulnerability and the corresponding score willbe displayed. Any help would be appreciated Thank you.

    Read the article

  • Mapping an amazon server to a domain name registered with name.com

    - by S4M
    I have an amazon S3 web server and a domain name registered in name.com (the name is sam-experiments.com). I am trying to have a static page hosted on the amazon web server to be displayed on http://www.sam-experiments.com On the web server side, my bucket name is 'www.sam-experiments.com', and it links to here: http://www.sam-experiments.com.s3-website-eu-west-1.amazonaws.com/ On name.com, I added a new record with the followin characteristics: Record Type: CNAME Record Host: www.sam-experiments.com Record Answer: www.sam-experiments.com.s3.amazonaws.com. (as specified in the documentation here: http://docs.amazonwebservices.com/AmazonS3/latest/dev/VirtualHosting.html#VirtualHostingCustomURLs) TTL: 300 However, nothing gets displayed on www.sam-experiments.com, and I am not able to find what I am doing wrong. I really would appreciate some tip. Thanks! Note: I already posted this question in stackoverflow, but didnt get any answer, so I thought posting here may be more appropriate.

    Read the article

  • ASUS EPC 1015CX won't boot with display after installing additional drivers

    - by Dinesh
    I have a ASUS EPC 1015CX with Ubuntu 12.04 LTS installed using wubi alongside Windows 7. It worked perfectly after installing except that the supported screen resolution was only 800*600 instead of 1024*600. The specifications of the 1015CX device can be found here I tried installing additional drivers which was Broadcom for wireless and Cedarview-drm. By this time there was no display coming up after the boot. I could hear a voice and then the letters I typed got pronounced correctly. So, I guessed the issue has to be with the graphic terminal. I tried repair broken packages in the menu and booted and the display is now at 1024*600. But, if I restart normally the problem continues like before. As per what I found out after searching, I again opened additional drivers and installed Cedarview-graphics-driver. I tried restarting hoping it will work. But again, the result was same. There was no display but the system was working. I did more searching and followed the instructions found here. But still the result was same. I am keen to switch to linux from windows after hearing and learning great things about it. I know this community is good and always helping. I wanted to thank you all for the help in advance. Please let me know what I am doing wrong and help me to switch to linux from this same old windows.

    Read the article

  • Upgrade won't allow second display to go to 1920x1080

    - by Rick
    I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

    Read the article

  • Java EE 6: How to get module name and app name

    - by user12798506
    Java EE 6??????????????????????????????????????????????? ???????????????[1] ?????????????JNDI???????????????????"java:module/ModuleName"?????? ?????"java:app/AppName"???????? InitialContext ctx = new InitialContext(); String moduleName = ctx.lookup("java:module/ModuleName"); // ?????? String appName = ctx.lookup("java:app/AppName"); // ????????? ???@Resource?????????????????????????????????????????? @Resource(lookup="java:module/ModuleName") String moduleName; // ?????????????????? @Resource(lookup="java:app/AppName") String appName; // ????????????????????? ???EAR???????Web????????EJB??????????????????AppName???????????????? ?????????GlassFish V3 (3.1.2.2)?WebLogic 12c (12.1.1)?JBoss AS 7 (7.1.1)?????????? ????????????????AppName???ModuleName??????????????? ?????????Web Profile??????????????????(GlassFish?JBoss?????Web Profile ?????)?????Apache TomEE (1.5.0)????????ModuleName???"localhost/<Web?????? >"?????????????????????????????????????? Java EE 6??????????????????????????????????????????????? ??????????????????????????????????????????????????? ???????????????????????????????????????????????????? ???????? ???Apache Tomcat 7.0?Servlet 3.0??????????????????????????????·??? ???????JNDI???????????????????????? ??:?Tomcat????????Java EE?????????????????????? [1] Java EE 6????(JSR 316)????????????? (pp.122-123): EE.5.15 Application Name and Module Name References A component may access the name of the current application using the pre-defined JNDI name java:app/AppName. A component may access the name of the current module using the pre-defined JNDI name java:module/ModuleName. Both of these names are represented by String objects.

    Read the article

  • Display resolution problem with Sony TV and Intel integrated graphics

    - by user96195
    I am trying to set the correct display resolution for my Sony TV (KDL-32V2000, native resolution 1366x768) connected via HDMI to my HTPC running Ubuntu 12.04. I have a Intel Core i3-530 and Intel mobo (DH57JG), so no proprietary graphics drivers. The problem is that I can't get the correct resolution to display on the TV. Initially I only had 1024x768 (or similar) as a maximum resolution, which was not displayed properly. I tried a few steps, including generating an xorg.conf (initially didn't have one) and adding the segment as described in this post regarding this particular TV. I couldn't get this to work, and at this stage have reverted to running without an xorg.conf. Another post suggested upgrading to kernel 3.5, which did give me a 1920x1080 resolution option. This results in the TV cutting off a fair bit of the edges of the screen. My Dell laptop with ATI drivers recognises the TV screen and works well via HDMI. Any idea how to proceed?

    Read the article

  • SEO non-English domain name advice

    - by Dominykas Mostauskis
    I'm starting a website, that is meant for a non-English region, using an alphabet that is a bit different than that of English. Current plan is as follows. The website name, and the domain name, will be in the local language (not English); however, domain name will be spelled in the English alphabet, while the website's title will be the same word(s), but spelled properly with accents. E.g.: 'www.litterat.fr' and 'Littérat'. Does the difference between domain name and website name character use influence the site's SEO? Is it better, SEO-wise, to choose a name that can be spelled the same way in the English alphabet? From my experience, when searching online, invariably, the English alphabet is used, no matter the language, so people will still be searching 'litterat' (without accents and such). Edit: To sum up: Things have been said about IDN (Internationalized domain name). To make it simple, they are second-level domain names that contain language specific characters (LSP)(e.g. www.café.fr). Here you can check what top-level domains support what LSPs. Check initall's answer for more info on using LSPs in paths and queries. To answer my question about how and if search engines relate keywords spelled with and without language specific characters: Google can potentially tell that series and séries is the same keyword. However, (most relevant for words that are spelled differently across languages and have different meanings, like séries), for Google to make the connection (or lack thereof) between e and é, it has to deduce two things: Language that you are searching in. Language of your query. You can specify it manually through Advanced search or it guesses it, sometimes. I presume it can guess it wrong too. The more keywords specific to this language you use the higher Google's chance to guess the language. Language of the crawled document, against which the ASCII version of the word will be compared (in this example – series). Again, check initall's answer for how to help Google in understanding what language your document is in. Once it has that it can tell whether or not these two spellings should be treated as the same keyword. Google has to understand that even though you're not using french (in this example) specific characters, you're searching in French. The reason why I used the french word séries in this example, is that it demonstrates this very well. You have it in French and you have it in English without the accent. So if your search query is ambiguous like our series, unless Google has something more to go on, it will presume that there's no correlation between your search and séries in French documents. If you augment your query to series romantiques (try it), Google will understand that you're searching in French and among your results you'll see séries as well. But this does not always work, you should test it out with your keywords first. For example, if you search series francaises, it will associate francaises with françaises, but it will not associate series with séries. It depends on the words. Note: worth stressing that this problem is very relevant to words that, written in plain ASCII, might have some other meanings in other languages, it is less relevant to words that can be, by a distinct margin, just some one language. Tip: I've noticed that sometimes even if my non-accented search query doesn't get associated with the properly spelled word in a document (especially if it's the title or an important keyword in the doc), it still comes up. I followed the link, did a Ctrl-F search for my non-accented search query and found nothing, then checked the meta-tags in the source and you had the page's title in both accented and non-accented forms. So if you have meta-tags that can be spelled with language specific characters and without, put in both. Footnote: I hope this helps. If you have anything to add or correct, go ahead.

    Read the article

  • Ubuntu won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • gnome-control-center can't set display resolution under openbox

    - by Andy
    I'm running Ubuntu 11.10 with Openbox on my laptop. Since I need to plug different external displays into it and Openbox environment doesn't automatically pick them up, I thought the best solution I can come up with is to use gnome-control-center and it's display settings tool from within Openbox. But although this tool does detect monitors correctly, it can't do any change -- clicking Apply button just doesn't seem to do anything. So my questions are: 1) how to get this tool working? 2) how to run "Displays" tool directly from command-line, skipping control center? 3) is there a better way to automatically detect and set resolutions on internal/external monitors under Openbox? Please note I tried arandr too and it doesn't even work for my environment (doesn't detect external display plugging in at all). For what it's worth, my laptop is Lenovo G560, Ubuntu is x64 version with all the updates rolled over. Thanks for your consideration.

    Read the article

  • Can't activate "mirror display"

    - by Nemo Peeters
    I have Ubuntu 12.04 on a Dell latitude E6410, I have a problem when using the VGA output I always have dual monitor and can't switch on the "mirror display" toggle under systems setting/displays. It's rather annoying when having to do presentation with a video projector. the option "mirror display" is in light grey and I can"t tick the box. Thanks for those who might have an idea how to resolve this? update: driver is: Intel® Ironlake Mobile x86/MMX/SSE2 card something like this ? description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 64 bits clock: 33MHz

    Read the article

  • Ubuntu Linux won't display netbook's native resolution

    - by Daniel
    FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

    Read the article

  • eepc 100h ubuntu 12.04 external monitor higher resolution modes force a rotated display

    - by Acky
    Hi I have a eeepc 1000h netbook. I've just installed ubuntu. I mainly use an external display (samsung ta350 full hd 22 inch affair) but when I select 1080 from the dropdown list, my only options are for a rotated portrait. My neck's non too supple, so tilting my head for extended periods is not really viable. :-) Any ideas on making ubuntu display 1080 normal landscape? It must surely be possible. My gparted boot cd does it perfectly. Any help greatly appreciated. Cheers!

    Read the article

  • display port on x230 not working

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • display port on x230 not workgin

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • frequency out of range - please change display mode

    - by Dave
    I just downloaded the latest version of the Ubuntu live CD, and have installed it on a desktop computer (a Fujitsu Scaleo P). Once installed it seems to work perfectly, although there are some updates recommended in the Update Manager. My problem is that, after having installed these updates and restarted the computer, I get this message on my monitor, and no Ubuntu interface is visible: frequency out of range - please change display mode I do not know how to change this when I can't access an interface. Is there a command that will bypass trying to boot the GUI and let me change the display mode via a CLI? I am brand new to Ubuntu and any help on this would be much appreciated.

    Read the article

  • Ubuntu display - no existent

    - by Patrick M
    My HP Pavillion Dv5 1004nr worked great with Ubuntu up until 11.04. Now, ever since Unity desktop environment the display has been sporadic at best. I was told that the video driver bugs (known and largely ignored) were fixed for the ATI raedon card in my laptop with 13.04. So I installed it. 13.04 doesn't even detect the display. Boots to black screen every time now. Is there ever going to be a fix for the AMD architecture with ATI raedon chipsets? do the developers even care? this has been an issue for years, and no sign of a fix in sight....

    Read the article

  • Displaying name instead of ID PHP MySQL

    - by Derek
    Hi, I need something simple; I have page where a user clicks an author to see the books associated with that author. On my page displaying the list of books for the author, I want a simple HTML title saying: 'The books for: AUTHORNAME' I can get the page to display author ID but not the name. When the user clicks the link in the previous page of the author, it looks likes this: <a href="viewauthorbooks.php?author_id=<?php echo $row['author_id']?>"><?php echo $row['authorname']?></a> And then on the 'viewauthorbooks.php?author_id=23' I have declared this at the start: $author_id = $_GET['author_id']; $authorname = $_GET['authorname']; And finally, 'The books for: AUTHORNAME, where it says AUTHORNAME, I have this: echo $authorname (With PHP tags, buts its not letting me put them in!) And this doesnt show anything, however if I change it to author_id, it displays the correct author ID that has been clicked, but its not exactly user friendly!! Can anyone help me out!

    Read the article

  • How can I quickly change display settings (dual monitor setup / single monitor setup on laptop)?

    - by Daren Thomas
    I have my laptop (running Windows XP SP3) at work hooked up to an external monitor. Whenever I unplug the external monitor (time to go home!) I have to manually change the display settings. This takes time and involves a lot of clicks. Is there a way to automate changing these settings? I'm thinking of a hotkey solution or a little application that I can start with Launchy to toggle between two profiles. I use the MultiMon tool for "extending" the taskbar to the second monitor - will I have to give that up?

    Read the article

  • How can I quickly change display settings from dual monitor to single monitor on laptop?

    - by Daren Thomas
    I have my laptop (running Windows XP SP3) at work hooked up to an external monitor. Whenever I unplug the external monitor (time to go home!) I have to manually change the display settings. This takes time and involves a lot of clicks. Is there a way to automate changing these settings? I'm thinking of a hotkey solution or a little application that I can start with Launchy to toggle between two profiles. I use the MultiMon tool for "extending" the taskbar to the second monitor - will I have to give that up?

    Read the article

  • Should I register the domain name that has not popular top level domain name

    - by sreginogemoh
    Lets say for example you want to register domain name assembly.com or assembly.net and find out that they are already registered(not available). Would you go with the domain name assemb.ly in such case? By having .ly the domain name represent word assembly but I think .ly domain is not so friendly for search engines? What do you think? Do you see any advantage of asemb.ly over assembly.com or assembly.net except it is shorter?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >