Search Results

Search found 804 results on 33 pages for 'dylan wan'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 3/33 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • IP Address Alias

    - by DanSpd
    Hello, I have a computer behind router with IP 192.168.0.166. I would like to know if it possible to mask real WAN IP to it. So in the end it would be visible as WAN IP but actually not.

    Read the article

  • Convert to WAN port

    - by Ramon Marco Navarro
    I have a ADSL2+ Modem/Router. Is it possible to set one out of four of the LAN ports as a WAN port? If yes, how? The brand/model is: Prolink H9200P. I already contacted Prolink about this and the site said to wait for one business day. But I'm still asking here just in case someone could answer faster than Prolink. Thank you.

    Read the article

  • Cisco SR520w FE - WAN Port Stops Working

    - by Mike Hanley
    I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

    Read the article

  • (Zywall USG 300) NAT bypassed when accessing in-house-server From LAN Via domain name

    - by mschr
    My situations is like this; i host a number of websites from within our joint network solution. On the network is basically 3 categories: the known public, registered via mac, given static dhcp lease the anonymous lan connections, given lease from specific dhcp range switches, unix hosts firewall Now, consider following hosts which are of interest 111.111.111.111 (Zywall USG 300 WAN) 192.168.1.1 (ZyWall USG 300 LAN) load balances and bw monitors plus handles NAT 192.168.1.2 (Linux www) serves mydomain1.tld and mydomain2.tld 192.168.123.123 (Random LAN client) accesses mydomain1.tld from LAN 23.234.12.253 (Random External client) accesses mydomain1.tld via WAN DNS A records are setup so that both mydomain1.tld and mydomain2.tld points to 111.111.111.111 - and the Linux www serves the http parts with VirtualHost configurations, setting up the document roots pr ServerName, this is not so interesting though.. NAT rule translates 111.111.111.111:80 to 192.168.1.2:80 (1:1 NAT) Our problem follows; When accessing http://mydomain1.tld from outside (23.234.12.253 example host) the joint network - everything is fine, zywall receives requests via port 80 and maps it to the linux host' httpd. However - once trying to go through the NAT from LAN side (in-house, 192.168.123.123 example host) then one gets filtered in the Zywall port 80 firewall. I know this only because port 443 is open for administration interface and https://mydomain1.tld prompts for zywall login. So my conclusion is, that the LAN that accesses 111.111.111.111 in fact are routed to 192.168.1.1 whilst bypassing the NAT table. I need to know how to setup NAT / Policy Route, so that LAN WAN LAN will function with proper network translations instead of doing the 'quick nameserver lookup' or whatever this might be.

    Read the article

  • speeding up cvs pserver over WAN

    - by Aleksandar Ivanisevic
    I have a remote location with 5 developers that are using a CVS (pserver) repository in main office via WAN, but the bandwidth i have is only a couple of hundred kbps so CVS operations are fairly slow. Is there any way to speed this up? I can rsync over a local copy of the CVS root(s) every couple of minutes, so this can handle the updates, but obviously not the commits. Is there any way to say to CVS to update from one server, but push to another one? Any other ideas?

    Read the article

  • accessing a web server from the LAN and WAN

    - by jessh
    My router does not support loopback. In order to view a webpage on my server, I either have to type in the local ip (192.168.1.201), or be on another network. What are my options for making this easier? Here are some possible things: Route all web traffic through an external proxy (seems to be overkill) Run my own DNS server (where to start?!) Buy a new router that supports loopback. Surely there is another way that I can use my laptop on the LAN and the WAN by typing in my domain more easily than these solutions.

    Read the article

  • How to set WAN side buffers for WRT54GL running Tomato Firmware

    - by Vickash
    I've recently set up a machine running m0n0wall to try and fight buffer bloat and do some traffic shaping. It was more convenient (geographically speaking) to connect the cable modem directly to my old WRT54GL, then pass everything to the m0n0wall machine and have that do the real routing work. It took a bit of work, but it's working pretty well. I have a cable connection. I have m0n0wall set up to utilize only 90% of the specified speed of my subscription, which is fine. But I've noticed that at certain times of the day (possibly when my true bandwidth drops below that 90%), there's more latency if the connection is used heavily, and traffic shaping doesn't seem to work as well. I suspect this is caused by the buffers on the WRT54GL still being unnecessarily large. If the connection is working as expected, they won't get filled, but in times of reduced bandwidth they would. Does anyone know the command I need to execute, on the WRT54GL running Tomato Firmware, to reduce the buffers on the WAN interface to the minimum size possible?

    Read the article

  • Sonicwall - dual WAN ports - switch from one to another

    - by Charles
    Hi, Folks! I'm using a SonicWall NSA 240 which has two WAN ports (T1 and Comcast) and the LAN port has a cable which connects to a switch. From the switch, several cables connect to other switches. The SonicWall doesn't have DHCP enabled; one of our domain controllers running Windows Server 2003 also functions as a DHCP server. Is there a way for a user in our network to change connection from T1 to Comcast as their ISP or vice versa? In other words, if a user is connected via the T1, can he/she somehow connect via Comcast instead? Thanks, in advance, for your help! Sincerely, Charles

    Read the article

  • Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

    - by Victor Sergienko
    I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

    Read the article

  • Connecting both WAN and LAN ports to the same hub

    - by C. Lee
    For some reason I wish to connect the WAN port and the LAN port on a router to the same hub and make the hub is connected to both networks, the Internet and a private network. Below is a diagram of the network configuration I'd like to build. I tried this and it didn't work as expected. PC 1 has no problem, but PC 2 cannot connect to the Internet. When I ping 192.168.0.1 from PC 2, all packets are lost. It works well when PC 2 is connected directly to the router. What's the problem with the network configuration above?

    Read the article

  • Removing (Presumably) Extraneous Network Adapters from Device Manager (eg WAN Miniport)

    - by Synetech inc.
    Can anyone shed some light on the default items in the Network Adapters branch of the Windows Device Manager? In addition to the network card, there are always a bunch of other things that I cannot find any useful information on such as RAS Asynch Adapter and all the WAN Miniports (IKEv2, IP(v6), L2TP, Network Monitor, PPPOE, PPTP, SSTP). I would like to trim it down and uninstall whatever possible but cannot find out exactly what these items are responsible for (and therefore whether or not they are needed on my system). Most of the pages found with Google are either people trying to fix an error with such an item or someone asking what it is and being given an unhelpful, pat response like “just leave them alone” or “they’re necessary”. I highly doubt that is the case and I’m certain that at least some items can be removed because even if they become necessary in the future they can be added again (for example installing Network Monitor or Protowall reinstalls the miniport drivers anyway).

    Read the article

  • Route an IP from WAN to a host on LAN on OpenWRT

    - by Zsub
    EDIT: I know how to use NAT, I specifically want the server to be reachable on two IP's, one private, one public, with the firewall of the OpenWRT in between, if feasible. At the office we have recieved a /29 from our ISP. The first address is reserved for their endpoint, so I'm free to use five addresses. We run a local network, so of course there is a router in between running OpenWRT to provide all hosts with (W)LAN (dhcp from a private range). However, we also have a server running OS X Server 10.6 (Snow Leopard) and I'd like that server to be accessible both from the LAN using a private IP as well as from the WAN on it's own public IP. Point of note is that the server only has one network port, so multiple NICs is not an option, unfortunately. How would I go about doing this?

    Read the article

  • Cannot assign port 4 to WAN on TP-Link WR740N by DD-WRT wiki

    - by Victor Sergienko
    I'm following the DD-WRT instruction to get TP-Link WR740N v3's Port 4 on a different VLAN, but this doesn't happen. First, I have no "Setup VLANs" settinngs tab in DD-WRT v24-sp2 (07/20/12) std r19519. I can get Internet on Wi-Fi if assigning eth1 to "WAN Port", but then all Ethernet ports get on the same VLAN and any wired connection grabs the DHCP address and Internet connection from router. When following the "old" instruction, if I run, say, nvram set vlan2ports="2 5*", should there appear a new interface, vlan2, in ifconfig, after ifconfig vlan2 up? It doesn't - does it mean there is no support for different VLANs in my software/hardware? What am I missing? Is it impossible to create more VLANs on TP-Link740?

    Read the article

  • Looking for a router with multiple WAN ports and load balancing

    - by Cyrcle
    I'm going to be moving in a few months. The location I'm moving to is great except it's on a road with very few people, so the internet access option is limited to DSL at 1.6Mbps down, 384kbps up. This is much slower than I'm used to. One option is to get at least two of the DSL lines. There's also good possibility that I'll be able to get WiMax or similar. I've been looking around a bit and it seems like what I need is a load balancing router with multiple WAN ports. Can anyone recommend some good ones? I could also go with a small power efficient Linux box with multiple NICs. What would be good software for that? It'd need to be able to handle around 10Mbps. Thanks for any help

    Read the article

  • VM clients can not access WAN

    - by Saariko
    I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • What is the best way to auto failover to backup WAN link for web server

    - by user66735
    Hi Iam looking for the best way to ensure my server ( application ) remains available for all my users (on web/LAN/WAN ), when my primary ISP link fails. My server is behind a firewall on which both my primary & secondary links land. I have already assigned multiple IPs (both ISP's static IP) to the 'A' record ( host.example.com ) in the DNS. However in a round robin scenario is there a way I can ensure that my web user will not see a "cannot dislay web page" error ever ?? What are the better methods to achieve this??

    Read the article

  • Replicate a big, dense Windows volume over a WAN -- too big for DFS-R

    - by Jesse
    I've got a server with a LOT of small files -- many millions files, and over 1.5 TB of data. I need a decent backup strategy. Any filesystem-based backup takes too long -- just enumerating which files need to be copied takes a day. Acronis can do a disk image in 24 hours, but fails when it tries to do a differential backup the next day. DFS-R won't replicate a volume with this many files. I'm starting to look at Double Take, which seems to be able to do continuous replication. Are there other solutions that can do continuous replication at a block or sector level -- not file-by-file over a WAN?

    Read the article

  • 2 RJ45 connectors on a one WAN cable

    - by mr_stavo
    Hello, I encountered strange setup on a network at company where I do some work. They have internet connection from small ISP located in the same building, all I see is one CAT5 cable with 2 RJ45 connectors. One is going to WAN port on the router and another into LAN port on the same router. This is the only way for internet connection to work. I tried to connect my laptop to one of the RJ45 but it won't work. Now, what is the purpose for such setup?

    Read the article

  • pfSense: How to route traffic out the WAN port?

    - by Ian Boyd
    Expert version i want to create a route in pfSense that will send traffic out the physical WAN port, not the PPPoE WAN port. i want to talk to talk to the web-server on my DSL modem, but it doesn't see packets wrapped in a PPPoE header. Long version My pfSense router is responsible for setting up the PPPoE connection over DSL to my ISP. When a machine on the LAN wants to sent packets to the internet, the default route sends packets out over the PPPoE connection. Those packets, wrapped in a PPPoE header, are sent on the ethernet cable to my DSL modem. From there they are sent the ISP, and the internet at large. i want a way to send a packet out the WAN port itself - not the PPPoE WAN port. My modem is sitting out there, with a http interface where i can monitor connection speed signal-to-noise ratio bandwidth connection time Whenever i try to set a route for destination of 192.168.2.1 (the IP that the modem will listen to for HTTP requests) to go out the WAN port, they instead end up going out the PPPoE port. The difference being that they're wrapped in a PPPoE protocol packet, and the modem isn't being sent the packet, it's being delivered to the ISP. Given that pfSense has no ability to direct traffic out the physical WAN port: how can i direct traffic out the physical WAN port on pfSense?

    Read the article

  • Gauge network traffic for each Citrix session

    - by molecule
    Hi all, We are currently reviewing the bandwidth of our WAN links. How much bandwidth does a "typical" Citrix session utilize over a WAN link? JFYI - we are using Citrix Program Neighborhood V10 and each session is configured to use 256 colors. I have set up PRTG and it appears that for a server hosting 4 users, the traffic is approximately 100k to 300k per session. Is that about right? If you had to set a benchmark on a per-user basis, how much bandwidth would you assign to each user? Thanks in advance.

    Read the article

  • 2 Web Servers, 2 Domains, 1 WAN IP configuration

    - by Tillman32
    The Problem: I have 2 domains, 2 web servers, 1 WAN IP. This is on a home network, so I don't have any crazy router or anything with the right tools, at least I don't think I do. I have a Dlink DIR-655 router. I need to be able to forward the website to the right box. 1 server is hosting www.site1.com, and the other should be hosting, www.site2.com. I forwarded the domain, to a port that is forwarded to that box. wanip:1235, 1235 is then forwarded to the internal IP of site2's server. But when I go to www.site2.com I get the 404 page of www.site1.com. I need www.site2.com to go to the right server. Is this something I can do in the virtual hosts of www.site1.com or is it something else. Also, if this isn't entirely possible, or if its a big process, I can just move www.site1.com to the www.site2.com's server, and use virtual hosts, that is an option that I would be okay with.

    Read the article

  • Local traffic through VPN, global traffic through WAN

    - by ikonoma
    I have an issue with my internet connection. I am using VPN (Aventail Client) to access the local resources. When connected to VPN the Internet traffic passes through it, not through my LAN or Wi-Fi network. I would like to change the routing table to use the Wi-Fi adapter of the PC for WAN traffic. I have routing file, which works very well and routes the traffic in this way, but only when I am physically connected to the local network through LAN. But I can't set it to work with the VPN connection, because I have no gateway when I am connected to it. Etc this in bold is missing. What to do? route change 0.0.0.0 mask 0.0.0.0 172.16.76.1 metric 200 if 12 route change 0.0.0.0 mask 0.0.0.0 10.44.2.1 metric 400 if 11 route add 150.251.0.0 mask 255.255.0.0 10.44.2.1 metric 100 if 11 route add 10.0.0.0 mask 255.0.0.0 10.44.2.1 metric 100 if 11 pause

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >