Search Results

Search found 72 results on 3 pages for 'epson'.

Page 3/3 | < Previous Page | 1 2 3 

  • HDMI connection does not support HDCP

    - by mroggi
    Hi, My problem: error message when playing blu-ray movies stating that the HDCP encryption could not be established. My setup: A new projector (EPSON EMP TW700) with a HDCP-compliant HDMI port a PC with a brand-new graphics adapter (Sapphire HD 4350 512MB DDR2) supporting HDCP Connection made with a DVI cable (it's installed in my wall) and a DVI-HDMI adapter to connect the projector Latest drivers and software My questions: What can I do to establish the HDCP connection? Would it help to use the HDMI output of the graphics adapter instead of the DVI (could it be that the HDCP chip is only supported on HDMI?) Any other ideas? I am very thankful for any hint.

    Read the article

  • How to obtain printed page count if no web-gui or driver-gui is available to show it

    - by Macgreggor at your service
    I am curious if windows print servers can keep a count of the printed pages sent to it? Can an individual PC (WinXP+)? Is there some secret command you can send it (with telnet, dos, etc)? I searched & couldn't find any questions similar to this here so lets keep this open-ended for future people who are curious. Is this more suited towards server fault? Maybe, but this is more about printers & local PC's have print servers now-a-days. Anyhow in my situation I have the following printers (yes old) I am curious on page-counts: HP Laserjet 1300 (using some kind of PC-card to LPT/Parallel adapter, then a network adapter on top of that [Netgear PS101 print server]) Canon Faxphone L80 Epson LX-300+

    Read the article

  • Can I wake up PC/laptop on remote printing request?

    - by dzieciou
    I have an old Epson printer that does not have network adapter, only a USB socket. I have also a computer with network card. I could combine them to put this printer in my local network, but then I would need to keep the computer always up and running. That's definitely not economic. Is there a way to wake up computer when printing request arrives? Something like Wake-on-LAN? Or I am forced to use additional hardware?

    Read the article

  • Ricoh Aficio 1515ps - How can I get the scanner to scan? (printing works)

    - by nutty about natty
    For similar screenshots and story, see: How to define my Samsung SCX3200 multifunction printer? and for a possible solution: How can I get an Epson TX560WD scanner working? Thanks! Edit n°1 installed xsane (via Ubuntu Software Center), launched it and get the following: Clicking on "Help" yields: I tried 4) man sane-dll which yields No manual entry for sane-dll I uninstalled "Simple Scan": didn't help. I tried 3) but aborted due to unsettling warning ;) wasn't that brave (or desperate). Maybe it's due to 1) and I'm stuck with it? Is it really not possible that a driver for either Windoze or Mac OS would also support scanning via Ubuntu? Edit n°2 Resorted to Windows XP and the Network TWAIN Driver ScanRouter or the "lite" version (which I found elsewhere) might also work (under Linux??); but it's more than I need. Thought about WINE, but also that seems to rely on SANE... So still no luck with this device's scanning capabilities with Linux (but good enough (via xp) for my purposes)...

    Read the article

  • Dot Matrix printers setup...

    - by Parhs
    Hello! I am using debian which is similar to ubuntu. They have 7 dot matrix printers some very old like this one http://www.omnidatasys.net/product/desc_printer_ti880.htm which works from 1979 daily and at text is faster than many inkjects. I believe that it has his own language... Sending text to serial port (port server) prints garbage. However i think is prints only capital english up to 95 asccii and greek and the rest up to 127 i think greek capital.(special chip ) Sending english capital letters prints garbage i think but i amnt sure... i will try again... The other printer are ESC/P compatible and i use generic epson driver provided from ghostscript... However i think that sending text via lp -dpr1 filename It prints the text as a grafic...Changing from printer font face(courier,times roman etc) or pitch has no effect... I am wondering if is there any work arround for this? In AIX they claim that lp command printed output as text as it prints and cobol programs send raw text to to lp printers . However in AIX they use some custom filters for the printers and has more options for dot matrix printers.. I would like to know if there is a solution for this.. To avoid graphics mode for text and change font face somehow.. The most Straight-through approach would be to use no driver ,just send ESC/P from cobol but this requires too much work... Thank you again!

    Read the article

  • Multiple monitors showing same screen but different resolutions

    - by Luis Alvarado
    Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

    Read the article

  • File doesn't exist when trying to change permissions following the avasys image scan manual

    - by Howard Graham
    I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

    Read the article

  • Batch print, reprint and scan

    - by Nikita K. Tsarov
    I am using ubuntu 13.10 with Epson wireless scanner/printer/fax WF 2540(It has an automatic document feeder- ADF). What I am trying to achieve is to be able to print with confidence over already populated A4 pages(hand drawn or otherwise). The idea is to get a batch of A4 pages grouped in a particular order and have them batch printed on specific parts of each page ,viewed on screen and edit/processed page by page. My idea was to batch scan the documents in order and display each scanned page to use that to judge/fit on-screen the coordinates for the output of each pages image... The easiest way to explain this is to look at these slide : https://drive.google.com/file/d/0B0Kuhf6iBidTNUl3U1NtT0pGbnc/edit?usp=sharing I would like to have this automated as much as possible using this printer but I am open to other suggestions. Are there any other better printers that can automatically scan and print at the document that is being scanned...with an accurate positioning in relation to elements already printed on the page?? Are there any other forums I should be asking and looking for answer/suggestions on my case/dilema??

    Read the article

  • Generic Text Only printer driver mangles control codes

    - by Terry
    If an escape character (or most other characters < 0x20) is sent to the generic / text only printer it gets printed as a period. Using the code in the WinDDK is it possible to 'correct' this behaviour so that it passes it through unmodified? The general scenario for this is that some application ('user app') outputs a document to a windows printer. My application requires this data in plain text form and so what I do is run a generic / text only printer that talks to a virtual com port. This generally works fine except where the 'user app' outputs binary data to the print queue without using the correct mechanism (which seems to work fine on some printer drivers, such as the Epson POS ones, but not the generic / text only one). I've tried changing the print processor selection without success and also tried looking at the gtt files to see if I could readily map in these characters as though they were printable, but the minidriver tool won't let me do that. Any suggestions?

    Read the article

  • How mobile printer that work alone and with WIFI for POS app?

    - by mamcx
    I'm hunting for a mobile POS printer for use in a mobile point-of-sale application (BestSeller). The requeriments is that must work independent of anything except the mobile device. So the solution is only: Printer + iPhone. I have a early question on this, here but with not answers. The idea is that the printer work as their own server and I can send print commands to make tickets and that stuff. The salesman work outside the company,and have not ascces to internet or other facilities. I found this: http://www.barcodegiant.com/epson/mobilink.htm and http://www.barcodegiant.com/zebra/mz220.htm but is not clear to me if will work as I imagine. And also, I don't find any how to in how make the programing...

    Read the article

  • print web on dot matrix receipt printer

    - by nightingale2k1
    Hi, I need to print a receipt from my web based apps using dot matrix printer epson tm-u220d (pos printer). I need to know, should I generate the receipt in html or in plain text ? I ever saw some commands for dot matrix printer to change the font size, line feed etc .. but I don't remember that commands. if I have to use plain text I need to use that commands. anyone knows where i can get the references ? Thanks

    Read the article

  • Need help with displaying the message correctly in the pole display

    - by SA
    Hi, I am using an HP RS232 pole display with the following setting: Char type: USA/Europe (default) Command mode: EPSON (default) Baud rate: 9600, n , 8, 1 (default?) Passthru None (Default) Here's the code using System.IO.Ports; private SerialPort port; port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.Handshake = Handshake.None; Port.WriteLine("Welocome to something something"); It has 2 lines consisting of 20 characters each with a total of 40 characters. I have no control how and where the characters get displayed. I have set it to accept ASCII char set and so I am able to type as is visble in the Writeline message

    Read the article

  • Need help with displaying the message correctly in the pole display always starting at the beginning

    - by SA
    Hi, I am using an HP RS232 pole display with the following setting: Char type: USA/Europe (default) Command mode: EPSON (default) Baud rate: 9600, n , 8, 1 (default?) Passthru None (Default) Here's the code using System.IO.Ports; private SerialPort port; port = new SerialPort("COM2", 9600, Parity.None, 8, StopBits.One); port.Handshake = Handshake.None; Port.WriteLine("Welocome to something something"); It has 2 lines consisting of 20 characters each with a total of 40 characters. I have no control how and where the characters get displayed. I would like it to always begin on line 1 position 1 but as I said earlier how would I be able to do that. The same program if I run again and again it moves a character to the left. I have set it to accept ASCII char set and so I am able to type as is visble in the Writeline message

    Read the article

  • Acer Allionone Z5810 Touchscreen Issues 12.04

    - by Johannes
    I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • How can I print from my lion mac mini to my windows XP, with simple file sharing?

    - by Jules
    I have quite a complicated setup, perhaps. And a lot of history on this issue, I'm hoping that I don't have to buy a new printer. I've got a HP Wireless USB Print Server, which requires client software, I can't just use it as an IP Printer. The HP software is pretty poor on the mac and is no longer supported and often locks up the printer server and takes some considerable effort to actually print something. Let alone if a windows machine attaches to it first. My printer is an Epson Stylus R285. However, the windows client software is fine and we can print from windows 7 / XP without problem. We have simple file sharing setup as this is the only way I could get windows XP to talk to windows 7. However, I can't seem to get my mac mini to connect as anything other than a guest to my xp machine, to connect to the shared printer. I'm not considering some kind of internet printing as this would seems the simplest solution. But I'm not sure what will work with my setup ?

    Read the article

  • unable to access Internet by wireless but can by cable

    - by Jeff King
    i'M GOING MAD! UNtil last friday I had been successfully using wifi with the supplier as VIRGIN through their Motorola SB 4200 cable Modem and the wireless router being the Linksys WRT 54G router. Supported were three lap tops and an EPSON 510W printer and this had been running with no issue for about 3 years. Back to last friday, we started suffering significant delays and then the network collapsed with no wireless access. I was able to connect a single laptop direct to the cable modem and internet access was restored to just that one device. I thought that the problem was the router so I tried a backup D-Link device with no success. I have subsequently bought another cable modem AND a netgear router plus addidtional ethernet cables but with no success. The best that happens is that the signal appears good but I cannot get access to the internet. A yellow question mark appears on the 'gradient' icon. Each laptop and router works elsewhere so I'm stumped. Mind you I am a real novice so I'm not surprised. Please can anyone tell me what I'm doing wrong?

    Read the article

  • How to scan multiple pages from a book under Linux?

    - by rumtscho
    I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

    Read the article

  • Help Me Help You Fix That

    - by BuckWoody
    If you've been redirected here because you posted on a forum, or asked a question in an e-mail, the person wanted you to know how to get help quickly from a group of folks who are willing to do so - but whose time is valuable. You need to put a little effort into the question first to get others to assist. This is how to do that. It will only take you a moment to read... 1. State the problem succinctly in the title When an e-mail thread starts, or a forum post is the "head" of the conversation, you'll attract more helpers by using a descriptive headline than a vague one. This: "Driver for Epson Line Printer Not Installing on Operating System XYZ" Not this: "Can't print - PLEASE HELP" 2. Explain the Error Completely Make sure you include all pertinent information in the request. More information is better, there's almost no way to add too much data to the discussion. What you were doing, what happened, what you saw, the error message, visuals, screen shots, whatever you can include. This: "I'm getting error '5203 - Driver not compatible with Operating System since about 25 years ago' in a message box on the screen when I tried to run the SETUP.COM file from my older computer. It was a 1995 Compaq Proliant and worked correctly there.." Not this: "I get an error message in a box. It won't install." 3. Explain what you have done to research the problem If the first thing you do is ask a question without doing any research, you're lazy, and no one wants to help you. Using one of the many fine search engines you can most always find the answer to your problem. Sometimes you can't. Do yourself a favor - open a notepad app, and paste the URL's as you look them up. If you get your answer, don't save the note. If you don't get an answer, send the list along with the problem. It will show that you've tried, and also keep people from sending you links that you've already checked. This: "I read the fine manual, and it doesn't mention Operating System XYZ for some reason. Also, I checked the following links, but the instructions there didn't fix the problem: " Not this: <NULL> 4. Say "Please" and "Thank You" Remember, you're asking for help. No one owes you their valuable time. Ask politely, don't pester, endure the people who are rude to you, and when your question is answered, respond back to the thread or e-mail with a thank you to close it out. It helps others that have your same problem know that this is the correct answer. This: "I could really use some help here - if you have any pointers or things to try, I'd appreciate it." Not this: "I really need this done right now - why are there no responses?" This: "Thanks for those responses - that last one did the trick. Turns out I needed a new printer anyway, didn't realize they were so inexpensive now." Not this: <NULL> There are a lot of motivated people that will help you. Help them do that.

    Read the article

  • Dot Matrix printing in C# ?

    - by Dale
    I'm trying to print to Dot Matrix printers (various models) out of C#, currently I'm using Win32 API (you can find alot of examples online) calls to send escape codes directly to the printer out of my C# application. This works great, but... My problem is because I'm generating the escape codes and not relying on the windows print system the printouts can't be sent to any "normal" printers or to things like PDF print drivers. (This is now causing a problem as we're trying to use the application on a 2008 Terminal Server using Easy Print [Which is XPS based]) The question is: How can I print formatted documents (invoices on pre-printed stationary) to Dot Matrix printers (Epson, Oki and Panasonic... various models) out of C# not using direct printing, escape codes etc. **Just to clarify, I'm trying things like GDI+ (System.Drawing.Printing) but the problem is that its very hard, to get things to line up like the old code did. (The old code sent the characters direct to the printer bypassing the windows driver.) Any suggestions how things could be improved so that they could use GDI+ but still line up like the old code did?

    Read the article

  • g++ symbol versioning. Set it to GCC_3.0 using version 4 of g++

    - by Ismael
    Hi all I need to implemente a Java class which uses JNI to control a fiscal printer in XUbuntu 8.10 with sun-java6-jdk installed. The structure is the following: EpsonDriver.java loads libEpson.so libEpson is linked dynamically with EpsonFiscalProtocol.so ( provided by Epson, no source available ) and pthread I use javah to generate the header file, and the code compiles. Then I put the libEpson.so in $JAVA_HOME/jre/lib/i386, and EpsonDriver.java uses an static initializar System.loadLibrary("libEpson") That part works, however, when I try to use any of the methods I get an unsatisfiedLinkError exception. Some time ago, a coworker did a version that works, and using objdump -Dslx I got the following: Program Header: LOAD off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**12 filesz 0x0000ccc4 memsz 0x0000ccc4 flags r-x LOAD off 0x0000d000 vaddr 0x0000d000 paddr 0x0000d000 align 2**12 filesz 0x00000250 memsz 0x00044a5c flags rw- DYNAMIC off 0x0000d014 vaddr 0x0000d014 paddr 0x0000d014 align 2**2 filesz 0x000000f0 memsz 0x000000f0 flags rw- NOTE off 0x000000d4 vaddr 0x000000d4 paddr 0x000000d4 align 2**2 filesz 0x00000024 memsz 0x00000024 flags r-- STACK off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**2 filesz 0x00000000 memsz 0x00000000 flags rw- Dynamic Section: NEEDED EpsonFiscalProtocol.so NEEDED libpthread.so.0 NEEDED libstdc++.so.6 NEEDED libm.so.6 NEEDED libc.so.6 SONAME libcom_tichile_jpos_EpsonSerialDriver.so INIT 0x00007254 FINI 0x0000ba08 GNU_HASH 0x000000f8 STRTAB 0x00001f50 SYMTAB 0x00000ae0 STRSZ 0x00002384 SYMENT 0x00000010 PLTGOT 0x0000d108 PLTRELSZ 0x00000008 PLTREL 0x00000011 JMPREL 0x0000724c REL 0x000045c4 RELSZ 0x00002c88 RELENT 0x00000008 TEXTREL 0x00000000 VERNEED 0x00004564 VERNEEDNUM 0x00000002 VERSYM 0x000042d4 RELCOUNT 0x000000ac Version References: required from libstdc++.so.6: 0x056bafd3 0x00 05 CXXABI_1.3 0x08922974 0x00 04 GLIBCXX_3.4 required from libc.so.6: 0x0b792650 0x00 03 GCC_3.0 0x0d696910 0x00 02 GLIBC_2.0 In the recently compiled file I get: Program Header: LOAD off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**12 filesz 0x00005300 memsz 0x00005300 flags r-x LOAD off 0x00005300 vaddr 0x00006300 paddr 0x00006300 align 2**12 filesz 0x00000274 memsz 0x00010314 flags rw- DYNAMIC off 0x00005314 vaddr 0x00006314 paddr 0x00006314 align 2**2 filesz 0x000000e0 memsz 0x000000e0 flags rw- EH_FRAME off 0x00004a00 vaddr 0x00004a00 paddr 0x00004a00 align 2**2 filesz 0x00000154 memsz 0x00000154 flags r-- Dynamic Section: NEEDED libstdc++.so.5 NEEDED libm.so.6 NEEDED libgcc_s.so.1 NEEDED libc.so.6 SONAME EpsonFiscalProtocol.so INIT 0x00001cb4 FINI 0x00004994 HASH 0x000000b4 STRTAB 0x00000da4 SYMTAB 0x000004f4 STRSZ 0x00000acf SYMENT 0x00000010 PLTGOT 0x0000640c PLTRELSZ 0x00000270 PLTREL 0x00000011 JMPREL 0x00001a44 REL 0x000019dc RELSZ 0x00000068 RELENT 0x00000008 VERNEED 0x0000198c VERNEEDNUM 0x00000002 VERSYM 0x00001874 RELCOUNT 0x00000004 Version References: required from libstdc++.so.5: 0x056bafd2 0x00 04 CXXABI_1.2 required from libc.so.6: 0x09691f73 0x00 03 GLIBC_2.1.3 0x0d696910 0x00 02 GLIBC_2.0 So I suspect the main diference is the GCC_3.0 symbol I compile libcom_tichile_EpsonSerialDriver.so with the following command ( from memory as I not at work right now ) g++ -Wl,-soname=.... -shared -I/*jni libraries*/ -o libcom_tichile_jpos_EpsonSerialDriver -lEpsonFiscalProtocol -lpthread Is there any way to tell g++ to use that symbol version? Or any idea in how to make it work? EDIT: I have another non-working version with the followin dump: Program Header: LOAD off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**12 filesz 0x0000bf68 memsz 0x0000bf68 flags r-x LOAD off 0x0000cc0c vaddr 0x0000cc0c paddr 0x0000cc0c align 2**12 filesz 0x000005e8 memsz 0x00044df0 flags rw- DYNAMIC off 0x0000cc20 vaddr 0x0000cc20 paddr 0x0000cc20 align 2**2 filesz 0x000000f8 memsz 0x000000f8 flags rw- EH_FRAME off 0x0000b310 vaddr 0x0000b310 paddr 0x0000b310 align 2**2 filesz 0x000002bc memsz 0x000002bc flags r-- STACK off 0x00000000 vaddr 0x00000000 paddr 0x00000000 align 2**2 filesz 0x00000000 memsz 0x00000000 flags rw- RELRO off 0x0000cc0c vaddr 0x0000cc0c paddr 0x0000cc0c align 2**0 filesz 0x000003f4 memsz 0x000003f4 flags r-- Dynamic Section: NEEDED EpsonFiscalProtocol.so NEEDED libpthread.so.0 NEEDED libstdc++.so.6 NEEDED libm.so.6 NEEDED libgcc_s.so.1 NEEDED libc.so.6 SONAME libcom_tichile_jpos_EpsonSerialDriver.so INIT 0x000055d8 FINI 0x0000a968 HASH 0x000000f4 GNU_HASH 0x00000a30 STRTAB 0x00002870 SYMTAB 0x00001410 STRSZ 0x00002339 SYMENT 0x00000010 PLTGOT 0x0000cff4 PLTRELSZ 0x00000168 PLTREL 0x00000011 JMPREL 0x00005470 REL 0x00004ea8 RELSZ 0x000005c8 RELENT 0x00000008 VERNEED 0x00004e38 VERNEEDNUM 0x00000002 VERSYM 0x00004baa RELCOUNT 0x00000001 Version References: required from libstdc++.so.6: 0x056bafd3 0x00 05 CXXABI_1.3 0x08922974 0x00 03 GLIBCXX_3.4 required from libc.so.6: 0x09691f73 0x00 06 GLIBC_2.1.3 0x0d696914 0x00 04 GLIBC_2.4 0x0d696910 0x00 02 GLIBC_2.0 Now I think the main difference is in the GCC_3.0 symbol/ABI EDIT: Luckily, a coworker found a way to talk to the printer using Java

    Read the article

  • What other tool is using my hotkey?

    - by Sammy
    I use Greenshot for screenshots, and it's been nagging about some other software tool using the same hotkey. I started receiving this warning message about two days ago. It shows up each time I reboot and log on to Windows. The hotkey(s) "Ctrl + Shift + PrintScreen" could not be registered. This problem is probably caused by another tool claiming usage of the same hotkey(s)! You could either change your hotkey settings or deactivate/change the software making use of the hotkey(s). What's this all about? The only software I recently installed is CPU-Z Core Temp Speed Fan HD Tune Epson Print CD NetStress What I would like to know is how to find out what other tool is causing this conflict? Do I really have to uninstall each program, one by one, until there is no conflict anymore? I see no option for customizing any hotkeys in CPU-Z, and according to docs there are only a few keyboard shortcuts. These are F5 through F9, but they are no hotkeys. There is nothing in Core Temp, and from what I can see... nothing in Speed Fan. Is any of these programs known to use Ctrl + Shift + PrintScreen hotkey for screenshots? I am actually suspecting the Dropbox client. I think I saw a warning recently coming from Dropbox program, something to do with hotkeys or keyboard shortcuts. I see that it has an option for sharing screenshots under Preferences menu, but I see no option for hotkeys. Core Temp actually also has an option for taking screenshots (F9) but it's just that - a keyboard shortcut, not a hotkey. And again, there's no option actually for changing this setting in Options/Settings menu. How do you resolve this type of conflicts? Are there any general methods you can use to pinpoint the second conflicting software? Like... is there some Windows registry key that holds the hotkeys? Or is it just down to mere luck and trial and error? Addendum I forgot to mention, when I do use the Ctrl + Shift + PrintScreen hotkey, what happens is that the Greenshot context menu shows up, asking me where I want to save the screenshot. So it appears to be working. But I am still getting the darn warning every time I reboot and log on to Windows?! I actually tried changing the key bindings in Greenshot preferences, but after a reboot it seems to have returned back to the settings I had previously. Update I can't see any hotkey conflicts in the Widnows Hotkey Explorer. The aforementioned hotkey is reserved by Greenshot, and I don't see any other program using the same hotkey binding. But when I went into Greenshot preferences, this is what I discovered. As you can see it's the Greenshot itself that uses the same hotkey twice! I guess that's why no other program was listed above as using this hotkey. But how can Greenshot be so stupid to use the same hotkey more than once? I didn't do this! It's not my fault... I'm not that stupid. This is what it's set to right now: Capture full screen: Ctrl + Skift + Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Skift + Prntscrn Capture Internet Explorer: Ctrl + Skift + Prntscrn And this is my preferred setting: Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Capture Internet Explorer: I don't use any hotkey for "last region" and IE. But when I set this to my liking, as listed here, Greenshot gives me the same warning message, even as I tab through the hotkey entry fields. Sometimes it even gives me the warning when I just click Cancel button. This is really crazy! On the side note... You might have noticed that I have "update check" set to 0 (zero). This is because, in my experience, Greenshot changes all or only some of my preferences back to default settings whenever it automatically updates to a new version. So I opted to stay off updates to get rid of the problem. It has done so for the past three updates or so. I hoped to receive a new update that would fix the issue, but I think it still reverts back to default settings after each update to a new version, including setting default hotkeys. Update 2 I'll give you just one example of how Greenshot behaves. This is the dialog I have in front of me right now. As you can see, I have removed the last two hotkeys and changed the first one to my own liking. While I was clicking in the fields and removing the two hotkeys I was getting the warning message. So let's say I click in the "capture last region" field. Then I get this: Note that none of the entries include "Ctrl + Shift + PrintScreen" that it's warning about. Now I will change all the hotkeys so I get something like this: So now I'm using QWERTY letters for binding, like Ctrl+Alt+Q, Ctrl+Alt+W and so on. As far as I know no Windows program is using these. While I was clicking through the different fields it was giving me the warning. Now when I try to click OK to save the changes, it once again gives me a warning about "ctrl + shift + printscreen". Update 3 After setting the above key bindings (QWERTY) and saving changes, and then rebooting, the conflict seems to have been resolved. I was then able to set following key bindings. Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn I was not prompted with the warning message this time. Perhaps changing key binding required a system reboot? Sounds far fetched but that appears to be the case. I'm still not sure what caused this conflict, but I know for sure that it started after installing aforementioned programs. It might just have to do with Greenshot itself, and not some other program. Like I said, I know from experience that Greenshot likes to mess with users' settings after each update. I wouldn't be surprised if it was actually silently updated, even though I have specified not to check for updates, then it changed the key bindings back to defaults and caused a conflict with the hotkeys that were registered with the operating system previously. I rarely reboot the system, so that could have added to the conflict. Next time if I see this I will run Hotkey Explorer immediately and see if there is another program causing the conflict.

    Read the article

  • CodePlex Daily Summary for Wednesday, May 23, 2012

    CodePlex Daily Summary for Wednesday, May 23, 2012Popular ReleasesChristoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.Microsoft SQL Server Product Samples: Database: AdventureWorks 2008 Analysis Services Project: AdventureWorks 2008 Analysis Services sample database project files. Project files for Analysis Services 2008 sample cubes (standard and enterprise). Lessons 1 to 10 tutorial files.HigLabo: HigLabo_20120522: Bug fix of EncodeToMailHeaderLine method when TransferEncoding is QuotedPrintable and Encoding is not ASCII.BlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3  (1) HTTP????????、ftp://??????????????????????LogicCircuit: LogicCircuit 2.12.5.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing start up issue.Internals Viewer (updated) for SQL Server 2008 R2.: Internals Viewer for SSMS 2008 R2: Updated code to work with SSMS 2008 R2. Changed dependancies, removing old assemblies no longer present and replacing them with updated versions.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesVirtu: Virtu 0.9.2: Source Requirements.NET Framework 4 Visual Studio 2010 with SP1 or Visual Studio 2010 Express with SP1 Silverlight 5 Tools for Visual Studio 2010 with SP1 Windows Phone 7 Developer Tools (which includes XNA Game Studio 4) Binaries RequirementsSilverlight 5 .NET Framework 4 XNA Framework 4SharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.0): New fetures:View other users predictions Hide/Show background image (web part property) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...Metadata Document Generator for Microsoft Dynamics CRM 2011: Metadata Document Generator (2.0.0.0): New UI Metro style New features Save and load settings to/from file Export only OptionSet attributes Use of Gembox Spreadsheet to generate Excel (makes application lighter : 1,5MB instead of 7MB)Audio Pitch & Shift: Audio Pitch And Shift 4.2.0: Backward / Forward buttons Improved features for encoding, streaming, menu Bug fixesSilverlight socket component: Smark.NetDisk: Smark.NetDisk?????Silverlight ?.net???????????,???????????????????????。Smark.NetDisk??????????,????.net???????????????????????tcp??;???????Silverlight??????????????????????callisto: callisto 2.0.28: Update log: - Extended Scribble protocol. - Updated HTML5 client code - now supports the latest versions of Google Chrome.ExtAspNet: ExtAspNet v3.1.6: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://bbs.extasp.net/ ??:http://demo.extasp.net/ ??:http://doc.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-05-20 v3.1.6 -??RowD...Dynamics XRM Tools: Dynamics XRM Tools BETA 1.0: The Dynamics XRM Tools 1.0 BETA is now available Seperate downloads are available for On Premise and Online as certain features are only available On Premise. This is a BETA build and may not resemble the final release. Many enhancements are in development and will be made available soon. Please provide feedback so that we may learn and discover how to make these tools better.PHPExcel: PHPExcel 1.7.7: See Change Log for details of the new features and bugfixes included in this release. BREAKING CHANGE! From PHPExcel 1.7.8 onwards, the 3rd-party tcPDF library will no longer be bundled with PHPExcel for rendering PDF files through the PDF Writer. The PDF Writer is being rewritten to allow a choice of 3rd party PDF libraries (tcPDF, mPDF, and domPDF initially), none of which will be bundled with PHPExcel, but which can be downloaded seperately from the appropriate sites.GhostBuster: GhostBuster Setup (91520): Added WMI based RestorePoint support Removed test code from program.cs Improved counting. Changed color of ghosted but unfiltered devices. Changed HwEntries into an ObservableCollection. Added Properties Form. Added Properties MenuItem to Context Menu. Added Hide Unfiltered Devices to Context Menu. If you like this tool, leave me a note, rate this project or write a review or Donate to Ghostbuster. Donate to GhostbusterEXCEL??、??、????????:DataPie(??MSSQL 2008、ORACLE、ACCESS 2007): DataPie_V3.2: V3.2, 2012?5?19? ????ORACLE??????。AvalonDock: AvalonDock 2.0.0795: Welcome to the Beta release of AvalonDock 2.0 After 4 months of hard work I'm ready to upload the beta version of AvalonDock 2.0. This new version boosts a lot of new features and now is stable enough to be deployed in production scenarios. For this reason I encourage everyone is using AD 1.3 or earlier to upgrade soon to this new version. The final version is scheduled for the end of June. What is included in Beta: 1) Stability! thanks to all users contribution I’ve corrected a lot of issues...New ProjectsAits HRM: Human Resource ManagermentBeeWix Toolkit: The toolkit is a set of classes we are using here at Beewix for our Social Network project. Church Management: Simple Church Management Software By Lalit Kumar & Ivan Lewis.Client Center for ConfigurationManager: The tool is designed for IT Professionals to troubleshoot SCCM/CM12 Client related Issues. The Client Center for Configuration Manager provides a quick and easy overview of client settings, including running services and Agent settings in a good easy to use, user interface.Common Instance Factory: Provides an abstraction over dependency injection and IoC containers using the abstract factory design pattern. It was created as an alternative to the Common Service Locator, but it does not use the service location anti-pattern and it provides support for releasing instances. Adapters are available for various dependency injection containers, such as Ninject and SimpleInjector, with more to come shortly. There are also WCF extensions available for decoupling services from DI containers.ConfigMgrRegistrationRequest: ConfigMgrRegistrationRequest allows you to simulate a client using System Center 2012 Configuration Manager Client SDK Basically, this project allows you to create Fake CM12 Clients, ideal when you need test load, reports, etc... when you run the tool (as a local Administrator), it will - Open a csv file and send request to register a new client to sccm - Send a update client id to sccm - Request policy - Send a ddr message - Send hinv more info on my blog at http://wmug.co.uk/w...COSC 320 TWIN System v2.0: Migration of previous version due to one month server limitationCultiv Photometadata for Umbraco: The PhotoMetaData package will extract meta data from images that you upload in your Umbraco media section. Dependency Injection Service Provider (DISP): Dependency Injection Service Provider (DISP) is a wrapper or an interface that aim to allow .NET developers use one of the inversion of control (IoC) containers out there such as StructureMap or Ninject from a high level of abstraction, using the same interface and classes without having to worry about the concrete implementation of each of the IoC containers. DISP provides an interface that will create and instance of an IoC container of your election, and provide generic interface to co...DirectPOS.NET: DirectPOS is a set of classes that bypasses OPOS and other libraries to talk to POS devices directly currently focusing on support for Bixolon, Samsung, and Epson thermal printers and some other devices.Dodongo's Quest: Roguelike in C# and XNAEpicCms: epiccms is only a name. The underlying system consists of two components: an api data service that replicates database tables, views, and procedures directly by url routes; a web interface that is very lightweight and purposed only to directly edit database table data. It is the intention that users will have full control over their data, how it is distributed, who has access, and when or how long anything(anyone) has access to all single pieces of data. It is also the intention that users wi...Find Duplicate file: This application is developed in WPF. you can find duplicate files from the file impression not from file size of from file name. Although this process is very time consuming. You can search and delete the similar file from the application itself. you can also open file location and delete manually from windows explorer. HoleFilling: We present a new image completion algorithm powered by a huge database of photographs gathered from the Web. The algorithm patches up holes in images by finding similar image regions in the database that are not only seamless but also semantically valid. Our chief insight is that while the space of images is effectively infinite, the space of semantically differentiable scenes is actually not that large. For many image completion tasks we are able to find similar scenes which conta...ILCC: A C compiler made in C# that generates .NET CIL code, XML, YAML and .NET PInvokeKendo UI framework for Orchard: This is a common location for kendo UI framework and related script libraries to use with Orchard CMS.MASAS SharePoint: This project is all about creating a SharePoint 2010-based capability to use the Multi-Agency Situational Awareness System (of systems) - MASAS. MASAS is focused on the exchange of structured information. This module is focused on using that information in your SharePoint 2010-based applications. Think of it this way - MASAS is an information bucket. MASAS allows you to share structured information by putting information into the bucket and by pulling information out of the bucket. ...MCP History: History Module for CB websiteMediaWikiSPMigrator: This project is aimed to make it easier to migrate from Mediawiki wiki's into SharePoint. The big differentiator is that it will allow you to map templates into a specific content type in SharePoint. NConf - Advanced Configuration Manager: NConf is an advanced configuration system for .Net projects. It's written out of the need for more advanced configuration than what .Net provides. The key features it supports is multiple configuration sources, simple to use syntax, the ability to reload/update configuration at runtime, and the easy ability to implement custom configuration sources.NMEA Interpreter: NMEA Interpreter is a class library created for one of my projects. It's main function is to parse NMEA sentences into usable easy to read and display data.Occupado: Time management for the School enviroment.OmahaMTG Site: Omaha MTG SiteProject Bloodlust Fury: Group project for CIS 375Radar IoC container: Very simple, fast and easy to use IoC container. Don't have any dependencies on external libraries - just pure .NET 4 Client Profile. Minimal size (~18kB in release build) makes it suitable to use in any project type.Service Request System: Service Request System (SRS) is a lightweight application for submitting and managing Service Requests of any type. The application is written in ASP.net (C#), and can utilize any type of database.Sign In As A Different User: Running your browser (IE) in a corporate environment will give you single sign on to web applications running in your intranet. But in some cases you need to access an URL with different credentials (admin purpose, etc.). Applications like SharePoint will provide you a solution right out of the box, but if this is not available the SignInAsADifferentUser project may help you. We as Glück & Kanja Consulting AG deployed such configurations in relation to Microsoft Lync components. Searching the...SimIn - Simulate Input in Your .NET Applications: SimIn is a light-weight .NET library which allows You to send user input to another applications. You can use SimIn in two modes: simulating user input (SendMessages), or control Your mouse. It supports DirectX input simulation, which means you can send mouse or keyboard messages to any DirectX game you want, and the game will register it correctly. SocialVeris: Este projeto consiste em uma rede social da instituição de ensino Veris IBTA. É um projeto de conclusão do curso de Análise e Desenvolvimento de Sistemas.Sprocket: Web application to management tasks in small company. TheList: A web an mobile application oriented to users that need a support in the creation of the supermarket list.Turntable Enhanced: TT Enhanced is a Turntable.fm Chrome extension used for giving the Turntable.fm website a bit of a face-lift. It adds cosmetic changes to the website, room moderation, drop down lists for easier usability, and much more.Web Part Collector: WebPart collector will help you identify any webpart or all webparts that are located inside your site collection

    Read the article

< Previous Page | 1 2 3