Search Results

Search found 10695 results on 428 pages for 'some none'.

Page 300/428 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

  • RAID degraded on Ubuntu server

    - by reano
    We're having a very weird issue at work. Our Ubuntu server has 6 drives, set up with RAID1 as follows: /dev/md0, consisting of: /dev/sda1 /dev/sdb1 /dev/md1, consisting of: /dev/sda2 /dev/sdb2 /dev/md2, consisting of: /dev/sda3 /dev/sdb3 /dev/md3, consisting of: /dev/sdc1 /dev/sdd1 /dev/md4, consisting of: /dev/sde1 /dev/sdf1 As you can see, md0, md1 and md2 all use the same 2 drives (split into 3 partitions). I also have to note that this is done via ubuntu software raid, not hardware raid. Today, the /md0 RAID1 array shows as degraded - it is missing the /dev/sdb1 drive. But since /dev/sdb1 is only a partition (and /dev/sdb2 and /dev/sdb3 are working fine), it's obviously not the drive that's gone AWOL, it seems the partition itself is missing. How is that even possible? And what could we do to fix it? My output of cat /proc/mdstat: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid1 sda2[0] sdb2[1] 24006528 blocks super 1.2 [2/2] [UU] md2 : active raid1 sda3[0] sdb3[1] 1441268544 blocks super 1.2 [2/2] [UU] md0 : active raid1 sda1[0] 1464710976 blocks super 1.2 [2/1] [U_] md3 : active raid1 sdd1[1] sdc1[0] 2930133824 blocks super 1.2 [2/2] [UU] md4 : active raid1 sdf2[1] sde2[0] 2929939264 blocks super 1.2 [2/2] [UU] unused devices: <none> FYI: I tried the following: mdadm /dev/md0 --add /dev/sdb1 But got this error: mdadm: add new device failed for /dev/sdb1 as 2: Invalid argument Output of mdadm --detail /dev/md0 is: /dev/md0: Version : 1.2 Creation Time : Sat Dec 29 17:09:45 2012 Raid Level : raid1 Array Size : 1464710976 (1396.86 GiB 1499.86 GB) Used Dev Size : 1464710976 (1396.86 GiB 1499.86 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 15:55:07 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : lia:0 (local to host lia) UUID : eb302d19:ff70c7bf:401d63af:ed042d59 Events : 26216 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 0 0 1 removed

    Read the article

  • Recent DDE / file open issue with Office 2007 affecting only a few machines, is a Windows Update to blame?

    - by kafka
    All our workstations run Windows 7 Professional 64 bit. It started with one, then another, then another couple of machines having a problem accessing Word files locally and on the network. This doesn't happen on my machine though. Affected users get the error message 'There was a problem sending the command to the program'. I've Googled for solutions, but none of the answers worked. They suggested deleting certain registry keys; unregistering and reregistering the program for DDE; resetting the way that the shell opens .docx programs etc. each to no avail. As it affects local and network shares I believe the problem lies with the clients, and not the server, and I'm starting to suspect that there could have been a recent Windows Update which has caused this. I've tried comparing the updates on my working machine with an affected machine, but I can't immediately see any major differences. Has anyone else recently encountered this problem? What are the best steps to take to further isolate what could be causing this?

    Read the article

  • Missing Boot Manager in Vista

    - by Selase
    I am in really deep trouble here and would need advice. A message just pop up on my screen and I had to restart my laptop. Upon restarting the Boot Manager got corrupted. I am running Windows Vista 32 bit by the way. I got onto Google with a friend's PC and found two basic ways of fixing it. The first one that requires Windows to automatically fix it using Startup repair ends up with the error message: Startup REpair cannot repair this computer automatically The second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which I believe should be C:. If I hit Y(yes) for the rebuild process to take place I get the message The required system device cannot be found I then try the second option which requires me to recreate the BCD Store. It ends up with an error message that says: The store export operation has failed. The requested system device cannot be found Proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because it's identifying the Windows installation on D: instead of C: but how to change that I have no idea. I don't know how it happens to identify an operating system on D: when there's none there. How do I go about fixing the Boot Manager? I have very important files on my system and can't afford to reinstall Windows. I really need to fix this.

    Read the article

  • Access to CD/DVD Drive is Denied through Windows 7 Explorer (Permission Problem)

    - by Synetech inc.
    A while ago I started having trouble with my optical drives. Both of them keep showing up in Explorer as CD/DVD drives on boot, but as soon as I put a disc in either one, it suddenly turns into a hard-drive—“local disk” is displayed in the Type column, though the File System column remains UDF/CDFS. (I though that maybe it was a permission issue on the registry key in HKLM\System\CurrentControlSet..., but I’m not so certain because of the next test.) When I try to open a disc (of any type), I get an access denied error message. If I open an elevated command-prompt, I am able to access the files. Also, if I kill Explorer and run it from an elevated command-prompt (thus giving Explorer elevated permissions), then I can access the files from Explorer. I’ve tried uninstalling and reinstalling the devices without success. The security dialog indicates that there are none set for the drives (no owner and no permissions). I tried setting the owner, but am only able to do so if there is a disc in it (it complains if it is empty), but the settings do not stick (if I immediately open the security dialog after setting it, it is empty again). I tried setting permissions, but that gives an error. I’ve included a screencap-flowchart of the security dialog of one of the drives below. (Yes, I made sure that there are no upper- or lower-filters, and yes, I ran sfc. I also made sure that in the policy editor, “devices: restrict CD-ROM...” is not set.) Does anyone know what the owner and permissions are supposed to be for optical drives and how to reset them?

    Read the article

  • Windows 7 BSOD, safe mode working,

    - by mil0ck
    I need help getting my dualboot with Windows 7 and Ubuntu 12.04 to work, and since I'm not to experienced with computers I've been pretty dumb. Here's what I've done, quite shortend though: First removed a Ubuntu 10.04 partion, and replaced bootloader using EasyBCD Installed Ubuntu 12.04 on same partion as before Decided I need more space so I shrinked my C: partion (Windows partion) using Here, after rebooting my computer, I was stuck a grub rescue, when booting up the computer I fixed that by using SuperGrubDisk Rescatux and then using my Windows Vista install disk to repair the computer (computer is using Windows 7) I know re-installed Ubuntu 12.04 on the linux partion and got the GRUB-bootloader working Then, after using my computer for several hours, I installed beta drivers (version 304.79) for my GeForce GTS 240 and then rebooted my computer. At the first boot (after reboot) my computer just crashed, and here I am When trying to boot Windows 7 now I get a Blue Screen Of Death. I can though boot in to safe mode with everything working. I have uninstalled the beta drivers and installed the same one as before but still the same problem. I have tried all the commands in Bootrec.exe and none is working. I can't neither find an OS when using Bootrec.exe/ScanOs. I have also tried running: sfc/scannow and that comes out clean. Short: My harddrive and files seems to be intact but when booting I get bluescreen. I can though boot in to safemode with everything working. I need help Thanks to anyone who even took the time to read that. //mil0ck

    Read the article

  • Outlook 2010 - Missing New Mail Envelope Icon

    - by sdoca
    I've seen a number of posts related to this issue, but none with a solution that works for me. I have: Windows 7 Professional 64 bit Office/Outlook 2010 "Show an envelope icon in the taskbar" checked "Hide When Minmized" selected "Show icon and notifications" selected for Outlook in my taskbar settings This used to show me the envelope icon in my notifications area. Then something happened with my user profile and the sys admins created me a new one. Since then, the envelope only displays if Outlook is not minimized. It doesn't matter if I unselect "Hide When Minmized", the icon still doesn't display when new mail arrives. If I select "Display a Desktop Alert", then the icon is displayed. However, I HATE the desktop alert as I find it too intrusive/distracting. Is there some way to just get the envelope icon working (again)? UPDATE More testing and sometimes I will and sometimes I won't get an envelope icon with the desktop alert turned on. This is driving me nuts!! UPDATE TWO I like my notification area of the taskbar to be clean. So, all icons are set to "Only show notifications" except for Outlook as noted above. I've noticed the envelope icon is being displayed in the expanded notification area when I click on the up arrow to view all icons. So, it is being added to the notification area, but not displayed. It's a rather useless feature now...

    Read the article

  • PHP Page Stopped outputting content After Running "yum install php-devel" Command

    - by stwhite
    This error is bizarre but after running the "yum install php-devel" command (after a long day of trying to install Facedetect and OpenCV for face detection) my site stopped functioning. The site uses mysql and php. When you hit the url, the page executes the mysql and the php, but it appears to randomly stop outputting the content of the page. None of the code was changed and the site was working flawlessly prior to running the mentioned ssh command. I do use output buffering in the site, but after removing the calls "ob_flush", "ob_end_flush" and "ob_start" it didn't appear to help—still having issues with the site. Any ideas what this could be? Here is output from terminal: [myserver ~]# cd Facedetect-4b1dfe1 [myserver Facedetect-4b1dfe1]# phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 [myserver Facedetect-4b1dfe1]# configure bash: configure: command not found [myserver Facedetect-4b1dfe1]# phpize && configure && make && make install Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 bash: configure: command not found bash: Read: command not found [myserver Facedetect-4b1dfe1]# make make: *** No targets specified and no makefile found. Stop. [myserver Facedetect-4b1dfe1]# yum install php5-devel

    Read the article

  • Random "not accessible" "you might not have permission to use this network resource"

    - by Jim Fred
    A couple of computers, both Win7-64 can connect to shares on a NAS server, at least most of the time. At random intervals, these Win7-64 computers cannot access some shares but can access others on the same NAS. When access is denied, a dialog box appears saying "\\myServer\MyShare02 not accessible...you might not have permission to use this network resource..." Other shares, say \\myServer\MyShare01, ARE accessible from the affected computers and yet other computers CAN access the affected shares. Reboots of the affected computers seem to allow the affected computer to connect to the affected shares - but then, getting a cup of coffee seems to help too. When the problem appears, the network seems to be ok e.g. the affected computers can access other shares on the affected server and can ping etc. Also Other computers can access the affected shares. The NAS server is a NetGear ReadyNas Pro. The problem might be on the NAS side such as a resource limitation but since only 2 Win7-64 PCs seem to be affected the most, the problem could be on the PC side - I'm not sure yet. I of course searched for solutions and found several tips addressing initial connection problems (use correct workgroup name, use IP address instead of server name, remove security restrictions etc) but none of those remedies address the random nature of this problem.

    Read the article

  • USB drive was bootable, but no longer boots

    - by i-g
    I'm trying to install a new OS onto a computer from a bootable USB stick. I previously installed Ubuntu Linux and it was a piece of cake -- I downloaded the ISO image, used UNetbootin to copy it to the USB drive and make it bootable, and that was that. Now, however, no matter what I try, I can't make the same USB drive bootable again! I've tried formatting it as FAT32 and NTFS. I've tried several different Linux distributions and Windows 7. I've tried using UNetbootin, Windows 7 USB Download Tool, WinToFlash, and manually making it bootable with diskpart/bootsect/bootrec. (Yes, I've tried bootsect /nt60 x: /force.) None of this seems to be working! When I try to boot from the drive, the machine reads from it (I can see the drive's LED blinking) and then gives me the same "Insert system disk and press Enter" message. (I've disabled booting from the hard drive.) Am I missing something I need to do to make the USB drive bootable again? I think it lost some pixie dust when I formatted it with the standard Windows formatting tool (it was quicker than deleting files), but I have no idea what it was or how to get it back. The USB drive in question is a SanDisk Cruzer 8GB SDCZ6. The computer I'm working on is running Windows Vista SP1.

    Read the article

  • How to safely use grub rescue> in Fedora 16? System does not boot anymore

    - by YumYumYum
    When i boot my PC, i get this in my Fedora 16 distro. I have tried as following but none allowing me to boot anymore. Any help please? I am blocked completely. Grub loading. Welcome to GRUB! error: file not found. Entering rescue mode... grub rescue> grub rescue> ls (hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1) grub rescue> ls (hd0,gpt2)/ ./ ../ lost+found/ memtest86+-4.20 grub2/ System.map-3.1.0-0.rc3.git0.0.fc16.i686 config 3.1.0.0.rc3.git0.0.fc16.i686 grub/ vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686 elf-memtest86+-4.20 initramfs-3.1.0.0.rc3.git0.0.fc16.i686.img initramfs-3.1.0.0.rc4.git0.0.fc16.i686.img System.mpa-3.1.0.0.rc3.git0.0.fc16.i686 config-3.1.0.0.rc3.git0.0.fc16.i686 vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686 grub rescue> set prefix=(hd0,gpt2)/boot/grub grub rescue> set root=(hd0,gpt2) grub rescue>insmod normal error unknown filesystem. or sometimes "error: file not found." grub rescue>normal unknown command normal

    Read the article

  • Connecting to Server 2008 shares fails

    - by Chris J
    I'm having problems getting a reliable share working on an x64 Server 2008 R1 SP1 server. All works well after a reboot, but after some time (within a day) the shares become unavailable to XP and Server 2003 servers. Interestingly, they remain available to other Server 2008 servers. On trying to access \\server\share, Server 2003 returns immediately and simply gives me the message "The specified network name is no longer available", XP takes a minute or two to timeout before giving the same message. There doesn't seem to be anything in the event logs indicating a problem. Doing some googling over the last day or two I've seen the following blamed: Bad network drivers ... I've updated to the latest drivers with no result Symantec anti-virus ... we're not using it (currently no AV on the server) Receive window auto-tuning ... I've disabled with netsh int tcp set global autotuninglevel=disabled and netsh int tcp set global rss=disabled None of these have had an effect. Windows Firewall is currently disabled. As other Server 2008 boxes (both x32 and x64) can connect, I can only assume that there's some new security configuration that's not quite right - or there's an AD issue that I need to trace, but don't know where to start. Even if anyone doesn't know how to resolve, if someone knows what I need to look for with Wireshark this would be a help.

    Read the article

  • Recommendation for a simple no-frills Windows PDF printer driver?

    - by Scott Bussinger
    I'm looking for an extremely simple Windows PDF printer driver that I can recommend to clients. Ideally it would have these characteristics: When you print something, it should just create it as a temporary file and then display it in their default PDF viewer with no prompting. If they want to save it, they can save it manually from inside the viewer. This workflow should be with no special post-install configuration. Installation should be very simple. A double click the installation program and click "Finish" sort of thing. No complicated multi-step installation, no asking questions your grandmother wouldn't know the answer to (preferably no questions at all), no extra crap being installed. An option for a completely silent installation would be nice, but not necessary. Ideally it would be free to simplify their installing on a small network, but low cost is an option. I've tried a quite a few but none really fit the bill. Some can achieve the first goal but only after careful configuration, some try to install extra toolbars, some have other installation complexities that would make it hard for extremely novice users to succeed. Any suggestions? Thanks!

    Read the article

  • Recieving a 500 Internal Server error after login success?

    - by Jeremy Quick
    I created my first member login form which takes the typical username and password and then sends it to the code below: checklogin.php: mysql_connect($db_host, $db_username, $db_password) or die(mysql_error()); mysql_select_db($db_database) or die(mysql_error()); $username=$_POST['username']; $password=$_POST['password']; $username = stripslashes($username); $password = stripslashes($password); $username = mysql_real_escape_string($username); $password = mysql_real_escape_string($password); $sql="SELECT * FROM users WHERE username='$username' and password='$password'"; $result=mysql_query($sql); $count=mysql_num_rows($result); if($count == 1) //ERROR APPEARS TO TAKE PLACE HERE { session_start(); $_SESSION['username'] = $username; $_SESSION['password'] = $password; header('login_success.php'); } else { header("location:login_fail.php"); } If I type in the wrong information everything works properly so I know the error appears to be taking effect in the marked if statement. I have been searching the internet now looking for solutions but none seem to match mine or I am overlooking them. I've made a few changes which brought me to this point, before I was receiving deprecation warnings. Also, I have checked the logs and they are empty of errors relating to this.

    Read the article

  • Javascript loading never completes on many sites

    - by Joe
    I recently moved country and have found that on many websites the page never finishes loading. In some cases, no content is ever displayed, but the loading will never time out. Loading Developer Tools in Chrome shows me that it is the Javascript files which never load. For example, this BBC article will never load compatability.js, though will load all the other JS files perfectly. Google Maps often fails to finish loading, meaning it's impossible to make searches. There seems to be no pattern to which files will fail to load (i.e. they don't come from the same CDN). I have tried Chrome, Safari and Firefox on OSX 10.8, and Chrome on my girlfriend's OSX 10.7. I have similar issues on the iPad. In many cases, if I can go to the mobile version of the page that seems to load fine. I have run the browsers in private mode, disabled plugins, updated flash, cleared the cache, flushed the DNS cache - though it would seem that if this is happening on other devices, none of this would work anyway. Is this an ISP issue? And if so, why would it be limited to certain JS files and not all? JS files from the same domain work fine, so I'm not really sure what I should be looking for.

    Read the article

  • IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

    - by NVRAM
    I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

    Read the article

  • nVidia performance with newer X and newer driver abysmal with Compiz

    - by Nakedible
    I recently upgraded Debian to Xorg 2.9.4 and installed nvidia-glx from experimental, version 260.19.21. This was somewhat of an uphill battle as the dependencies for the experimental nvidia-glx package are still somewhat broken. I got it to work without forcing the installation of any packages and without modifying the packages. However, after the upgrade compiz performance has been abysmal. I am using the desktop wall plugin and switching viewports is really slow - takes a few seconds for each switch. In addition to this, every effect that compiz does, such as zoom animations for icons when launching applications, takes seconds. The viewport switching speed changes relative to the amount of windows on that virtual screen - empty screens switch almost at normal speed, single browser windows work almost decently, but just 4 rxvt terminals slows the switches down to a crawl. My compiz configuration should be pretty basic. Xorg is likewise configured without anything special - the only "custom" configuration is forcing the driver name to be "nvidia". I've fiddled around with the nvidia-settings and compizconfig trying different VSync settings, but none of those helped. My graphics card is: NVIDIA GPU NVS 3100M (GT218) at PCI:1:0:0 (GPU-0). This is laptop GPU that is from the Geforce GTX 200 series. Graphics card performance should naturally be no problem. EDIT: In the end, nothing really worked, and I got really annoyed with the state of compiz and its support in Debian. Many nVidia driver revisions have passed and I am using Gnome 3 now, so I am accepting the best answers to this question even though the issue was not resolved.

    Read the article

  • Configure New Server for .htaccess

    - by Phil T
    I have a new LAMP CENTOS 5 server I am setting up and trying to copy the configuration from another web server I have. I am stuck with what I think is a mod_rewrite problem. If I go to http://old-server.com/any_page_name.php it correctly routes through some handling code in index.php and shows me a graceful "Page Cannot Be Displayed" message. But if I go to http://new-server.com/any_page_name.php I get an ugly Apache 404 Not Found error message. I looked in both httpd.conf files and they both have only one reference to mod_rewrite. LoadModule rewrite_module modules/mod_rewrite.so So it seems like that should be fine. At the bottom of httpd.conf I have the code: <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/html ServerName new-server.com ErrorLog logs/new-server.com-error_log CustomLog logs/new-server.com-access_log common </VirtualHost> Then in the root of /var/www/html I have the exact same .htaccess file that looks like this: RewriteEngine on Options +FollowSymlinks RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . index.php [L] ErrorDocument 404 /page-unavailable/ <files ~ "\.tpl$"> order deny,allow allow from none deny from all </files> So I don't see why the page load at old-server.com works fine while new-server.com doesn't route through index.php like I want it to do. Thanks.

    Read the article

  • Howto get exit code of a script started in screen session

    - by Bettina
    Hi folks, I am currently creating a backup script which uses screen to start a backup job with rsync inside a screen session. The backup jobs are started as follows. screen -dmS backup /usr/bin/rsync ... As soon as the rsync job is finished, the screen session is terminated automatically. To make sure, that the backup was successful, I would like to check the exit code of the rsync job but unfortunately I really don't know how to get the exit code after the screen was terminated. Does someone have a good idea how to automatically check, if the rsync job was successful or not? Would be great if someone does. I already thought about using a temp file but like this: screen -dmS myScreen "rsync -av ... ; echo $? /tmp/myExitCode" but this unfortunately does not work. Then I thought about using stderr like in the example below: screen -dmS myScreen "rsync -av ... 2 /tmp/rsync-sterr None of my ideas worked out so far, since stderr is not written when I use the command above. :-( ? Would be great if someone has a good idea or even a solution. Cheers, Bettina

    Read the article

  • Why does 64-bit Windows need a separate "Program Files (x86)" folder?

    - by Stephen Jennings
    I know that on a 64-bit version of Windows the "Program Files" folder is for 64-bit programs and the "Program Files (x86)" folder is for 32-bit programs, but why is this even necessary? By "necessary", I don't mean "why could Microsoft not have made any other design decisions?" because of course they could have. Rather, I mean, "why, given the current design of 64-bit Windows, must 32-bit programs have a separate top-level folder from 64-bit programs?" There are plenty of questions on Super User and elsewhere that assert "one is for 32-bit programs, one is for 64-bit programs", but none that I can find give the reason. From my experience, it doesn't seem to matter whether a 32-bit program is installed in the correct place or not. Does Windows somehow present itself differently to a program running out of "Program Files (x86)"? Is there a description that shows exactly what's different for a program installed in "Program Files (x86)" instead of "Program Files"? I think it's unlikely that Microsoft would introduce a new folder without a legitimate technical reason.

    Read the article

  • wireless to wired internet

    - by Mark T
    My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

    Read the article

  • Solaris 10: How to remove devices from a zpool with /usr currently mounted?

    - by cali-spc
    I use Solaris 10 on SPARC. I have /usr legacy mounted on a zpool 'usr-pool'. I now need to move some of the devices in usr-pool to another zpool which is running out of room. What is the safest way for me to do this? I already know that (since my zpool is not mirrored) I need to destroy and recreate the zpool. I know how to backup and restore a zfs snapshot. However... I'm stumped on how to unmount usr-pool without losing access to the commands I need on /usr to complete the backup/restore. Cursory research indicated that I should boot to OpenBoot (init 0) and then 'boot cdrom -s'. I did this but none of the zpools are accessible on that runlevel. I also read I could just copy /usr to another location, symlink /usr to that location, then do my backup/restore. Is that safe to do? I would appreciate some guidance. S.

    Read the article

  • .php file blank - .php5 files works

    - by Kleidi
    I have a problem with a server of mine. I've installed virtualmin/webin on it for administration and I have 1 domain on it. DNS management is external. On this domain I only have an html "Under Construction" index and 5 subdomains. In all those subdomains I have PHP systems running perfectly. I've tried to install Wordpress on the main domain and I'm having some issues: None .php files loads. I have made a phpinfo file on it to check it and it won't work either; only a blank page appears. When I check the source code of it in browser, appears the code. I have changed the extensions to .php5 and it worked perfectly. Something is going wrong with it but I can't figure out what. I have checked the apache error and nothing appears. 3 Days ago I upgraded from php 5.2.* to 5.4.21. Server is running CentOS 5.10.

    Read the article

  • Display errors using VMWare Player and Remote Desktop on Windows XP

    - by Tim
    I've come up against a weird display issue that I can't seem to find any "fix" for. When I first boot up my computer, everything behaves normally. If I start to use VMWare Player and/or Remote Desktop, my desktop starts having some odd video issues. The frames for some windows aren't drawn at all, if I move windows around rapidly, the area under where the window used to be isn't cleared (still shows artifacts of the content of the window), etc. In some cases, the minimize / restore / maximize buttons aren't drawn (but are click-able if you can guess where they are). I've tried the usual stuff - current drivers all around, using a single monitor, etc.. none of it seems to have any bearing. If I try to disable hardware acceleration, it tends to crash the computer. As I said earlier, it's running Windows XP, dual monitors, an NVidia en8400GS video card, asus p7p55d motherboard. Not sure what other pertinent details are needed. I would appreciate any help or suggestions!

    Read the article

  • Local user vs. domain user? What is the right way here?

    - by ebeeb
    I'm a software developer in a company with 6 employees. Everyone has a machine for him-/herself, so none of the machines is shared. I'm currently setting up my machine with Windows 8 and was experimenting a bit with domain and local user accounts. Correct me please if I'm wrong, but I think the idea behind is, that domain users generally should not be able to modify the configuration of a machine (like installing software), since they are able to login on every single machine in the domain. The local user (usually just one local administrator per machine) is the one who cares about the configuration of the machine. But in my case the login into the domain is just for being able to access directories/servers in the domain (I do not really know the details, all I know is, that loggin into the domain user account is necessary). So overall I've got a local admin account and a domain account used on my machine. While working I'm logged in to my domain user account. But it annoys me, that I always need to enter the credentials of my local user account when I'm about to update/install something, which happens quite often as a software developer. I fixed this with adding the domain account into the user accounts in my control panel and putting it into the Administrators group. The only thing I wanted to know about this: is there something REALLY bad about doing this? Or is there maybe a more common way to be able to act like a local admin, while logged in as a domain user? PS: I'm sorry about the tags, but I don't know the proper ones. I'd be glad if some of the superuser experts could fix this :-)

    Read the article

  • DNS caching server config problem

    - by Alex
    I have a Bind DNS caching-only server setup that is working. I am bringing up a new AD domain controller that will also be a DNS server for that AD but I don't want it responding to any DNS queries except those that are AD related. So, my goal is to leave this caching server as the primary DNS server for stations on the network and have it forward requests for the AD domain to the domain controller. My understanding is that I just need a forward zone for that domain pointing to the domain controller. However it does not seem to be working. So that leaves me to think that my caching server is not forwarding properly. For example, this AD is going to have a naming convention of hostname.mydomain.local. If I do an nslookup and specify the domain controller's IP address as the server, I can query addresses that exist in DNS on that server, such as dc1.mydomain.local. However, queries to my caching server times out (I get a response from the caching server if I query mydomain.local but none of the objects in that domain). Any suggestions? Here is my named.conf file: options { directory "/var/named"; listen-on { 192.168.0.14; 127.0.0.1; }; forwarders { ; ; }; forward first; }; zone "." in { type hint; file "db.cache"; }; zone "0.0.127.in-addr.arpa" in { type master; file "db.127.0.0"; }; //forward zone for mydomain.local zone "mydomain.local" { type forward; forwarders { 192.168.1.21; }; };

    Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >