Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 301/593 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

  • System freeze after opening Wi-Fi menu can boot into the machine and use Internet in recovery mode

    - by Michael
    So right now sitting in front of my Alienware area 51 desktop. It has a Broadcom Netlink BCM 5784M gigabit ethernet PCI E card. Most of the time able to get through the login screen and to the main screen if I click on the wireless settings on the top right-hand corner the system immediately freezes the cursor does not move at all keyboards are unresponsive. I was doing some quick Google searching and I found a suggestion to boot into recovery mode I did this and did a apt-get Distribution update which ran successfully installed then I rebooted into the regular system same thing I'm pretty sure it's the network card because even if I don't click the settings if a network related dialog opens such as disconnection or connection the system again immediately freezes. I'm running Ubuntu 13.04 ** update 1 ** Just was able to use my system for a little bit however when I went into Firefox and hit the web it again froze so obviously a driver problem but I'm not sure how to get drivers for Broadcom which apparently according to the description on stack-overflow is terrible Any ideas? Sorry for lack of punctuation on an ipad.

    Read the article

  • Can't set proper resolution with a Geforce 520

    - by D0X
    I installed the 12.04 LTS but cannot get my two monitors working. The latest nvidia-current drivers installed, but i just cant set proper resolution. My card is a geforce 520 1 DVI 1 VGA. With the nvidia drivers installed i can set the DVI monitor to 1600x1200 but the VGA no further than 1360x768 (with nvidia-settings). Without the nvidia driver (using the nouveau) it doesn't work either. This same issue i had with 11.10 and i had high hopes for 12.04.

    Read the article

  • Getting front audio jacks to work

    - by Ashfame
    I run Ubuntu 10.10 on my Intel D945. My front audio ports don't work in Ubuntu, the rear one does. I never got it working earlier when I had Ubuntu 10.04 but this time I am going to try it again. My codec is SigmaTel STAC9227 My ALSA information is here. Handy details: !!ALSA Version !!------------ Driver version: 1.0.23 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_hda_intel I know something that I will have to change the model of my module to make the front audio jack works but I couldn't find a model related line in my ALSA configuration file - /etc/modprobe.d/alsa-base.conf (I was able to get to that point in Ubuntu 10.04, may be something has changed). How can I proceed from here?

    Read the article

  • Precise pangolin won't install

    - by Percival Júnior
    I've been an ubuntu user since first release but now I can't install precise beta 2 32bits and neither 64. Tried so many times, already download nighly isos but nothing. 11.10 installs smoothly (usint it). My hardware is a samsung notebook 4gb of ram.., 25 gb partition for precise. I'm gonna tell you what actually happens... I boot from usb driver and I choose my language (portuguese - brazilian) choose partition till there everything is normal. But when I Put my name user and password and give NEXT the screen to choose my region appears a click Next again and at this point I get STUCK !!! NOTHING HAPPENS. I've waited for hours and all the system freezes. When I try to reboot,, my grub is gone. Thanks for the help.

    Read the article

  • Gnome-shell video freeze

    - by josephsmendoza
    So i have a 14.04 Ubuntu Gnome Live USB on my 16GB USB 3.0. It runs fine except sometimes it the screen will freeze, but I know stuff is still happening cause I can hear media playing. I did a little digging and i'm still not sure why, can someone help? Sorry if i don't provide enough details. ubuntu-gnome@ubuntu-gnome:~$ lspci -nnk | grep -iA2 VGA 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400}[10de:0867] (rev b1) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Kernel driver in use: nouveau

    Read the article

  • Wireless xbox360 pad connected with xboxdrv doesn't show in jstest

    - by Kyle Letham
    So Lubuntu 13.04, 3.4.0. I'm trying to use my wireless xbox controller. I've installed xboxdrv. I have to run it with sudo, or I get USBController::USBController(): libusb_open() failed: LIBUSB_ERROR_ACCESS. If I connect the adapter, run the program, and then press the button on the gamepad to connect it, it never really connects - just flashes like it's searching. If I reboot, leaving the controller searching, and run the command again while it's searching after I boot up, the controller connects (the light becomes solid in one corner). Using pkill xboxdrv and then relaunching it doesn't work. Regardless, no matter what I do, the gamepad never shows up in jstest-gtk. sudo xboxdrv --debug gives me: Controller: Microsoft Xbox 360 Wireless Controller (PC) Vendor/Product: 045e:0719 USB Path: 002:005 Wireless Port: 0 Controller Type: Xbox360 (wireless) [DEBUG] XboxdrvMain::run(): creating UInput [DEBUG] XboxdrvMain::run(): creating ControllerSlotConfig [DEBUG] UInput::create_uinput_device(): create device: 65534 [DEBUG] LinuxUinput::LinuxUinput(): Xbox Gamepad (userspace driver) 0:0 Any ideas?

    Read the article

  • How can I correct the paper size (A4) for Canon i560 printer for 12.04?

    - by Peter
    How can I correct the paper size (A4) for Canon i560 printer for 12.04? Canon i560-Paper size error-with printer driver for Ubuntu 12.04 Precise Pangolin offers the same problem, but the answers are not very helpful/elegant to me. Especially the second is far too imprecise and the dimensions for A4 suggested there do not seem to be correct as they do not match with any other (and correctly working) A-Size dimensions. My i560.ppd has for A4 a length of [842] which is then the width for A3 throughout the ppd-file. A3 printouts are fine (So just the way it should be). A4 are not. Cannot figure out why.

    Read the article

  • Can't set 1280x1024 with Nvidia Geforce 8400 GS

    - by torbengb
    I've just installed 10.04 LTS using the Windows installer. The system hangs during boot; the splash screen is frozen and it accepts neither Ctrl+Alt+F2 nor Ctrl+Alt+Del, only a hard reset. (I'm a linux noob.) When I edit the default Grub boot option to omit quiet splash, it gets to the point saying * setting sensors limit [OK] _ and there it stays. I can only get to the desktop using the Grub recovery boot option, of course with a lower resolution (800x600) but everything else seems to work fine. As I said, this is a new install. The only thing I've done is to use the Update Manager to get everything up to date, and activate the newest Nvidia driver using the "Hardware drivers" window. I had a similar problem when I installed 9.04 a year ago, and at that time posted this question with an answer that worked - this doesn't work with 10.04. Running nvidia-xconfig to create a new xorg.conf didn't fix it either (while in Recovery boot).

    Read the article

  • brother MFC-J435W wireless scanning issue

    - by ogreen32
    Thanks for taking the time to read this. I have a brother MFC-J435W and I was able to get the printer set up for wireless printing, but it is not allowing me to scan wirelessly. It gives me the message to "check connection". I'll tell you what I've done so far and maybe someone can help me out. I've installed the scanner driver and scan tool I installed Xsane (to see if it would allow the scanner to communicate with the computer and that didn't help). I've tried restarting the computer. After those things I am now at a loss as to where to go from here. Any help would be great. Thanks. I've also searched for this question in the Brother FAQ as well as on here and I haven't found an answer. Thanks again.

    Read the article

  • "Wireless disabled by hardware switch" after suspend and other hardware buttons ineffective - how can I solve this?

    - by fahadayaz
    I have recently purchased a Novatech nFinity N1410 laptop and am having problems with the wireless, which sudo lshw -C network tells me is Centrino Wireless-N 2230 and using the iwlwifi driver. The problem is that after the device has been suspended, I am not able to get the wireless working again without a restart. The network indicator states that the wireless disabled by hardware switch. Though Fn+F2 is meant to be the wireless switch, xev tells me that the system doesn't see it as anything at all when I press this hardware combination. Also, though the brightness up/down buttons work fine, the volume up/down buttons do not work either. What can I do to fix this? I am running Ubuntu 12.10 with all available updates installed.

    Read the article

  • Can I use HDMI with the Intel card of my optimus laptop?

    - by Byakkun
    I have an Dell Inspiron 7110 that has a Sandy bridge i7 and a discrete graphics card (GeForce 525M) from Nvidia. I want to be able to use my 23' display at home throungh hdmi but Intel integrated graphics card does not work with hdmi (VGA is not an option). I have tried bumblebee but it does not work. How could I use the hdmi port for my monitor. Using only the nvidia card with some driver is what I tought i could do but i don't want to give up composing because I use gnome-shell. Any options for doing this?

    Read the article

  • Chrome dispay Glich when GPU acc. on

    - by user289172
    Hy Everyone! I have some graphics glich when enable gpu acc. in chrome. If i disable acceleraion it fix the glich but, in full HD most of flash videos frame rate drop above frogs a**, so very slow... :) Any idea, what can i do? I Upload 2 pics from glich. My hardware: CM Hyper TX 3 on AMD A5300 with HD 7480D 6 GB RAM I use official AMD driver from amd.com, Ubuntu 14.04(I upgraded from 12.04, in Ubuntu 12, same glitch with old drivers.) I reinstalld x.org completly and purge all config files, but this didnt resolve the problem. If i use other drivers, i have some other problem ie.:nor automatic resolution chnge when connect new monitor, false refreshrate for displays and etc. Thanks for the help! http://i.stack.imgur.com/9PkrK.jpg http://i.stack.imgur.com/AMS22.jpg

    Read the article

  • Switching between Discrete and Integrated GPUs

    - by void-pointer
    Hello everyone, I develop CUDA applications on my Alienware M17x portable back-breaker, which has two discrete GTX 285M GPUs and one integrated GeForce 9400M GPU. I can currently switch between them using NVIDIA's software, but I would like the ability to do so within my applications for purposes of benchmarking and general convenience. Apparently this requires the "NDA version" of NVIDIA's Driver API, which I know not how to obtain. Would using this API be the only way to accomplish what I seek, and if so, how would I obtain it? A solution using Windows APIs would also be acceptable, though less preferable to one which would leverage a cross-platform API. I have created a similar thread concerning the matter on NVIDIA's forum, which is down at the time of this writing. Thanks for reading my question; it is much appreciated!

    Read the article

  • Ubuntu Wubi Booting Problem

    - by D3s7
    i have a problem with my Ubuntu 12.04 Wubi installation, sometimes when booting, the computer will get to the purple screen without the Ubuntu logo, then will go to a black screen and then lots of white saccaged colors will appear and i will be taken to the login page. But sometimes, it just get stuck on the black screen and does nothing and i have to hard shutdown and retry it until it works. What may cause this problem and why? I can shutdown correctly. Thanks for helping. Edit: RADEON HD 7650M Graphic card with latest available Drivers on amd's driver download site (fglrx drivers caused shutdown problems so i removed them). Screen resolution is 1600x900.

    Read the article

  • Stuck on busybox after a fresh install

    - by user54841
    I installed 11.10 and was getting stuck on Busybox unless I type exit. After grabbing the latest updates it then didn't get stuck on busybox but instead on a black screen of nothingness. I've now reformatted and started again using the exit technique for the time being. I had a search here before posting and none of the answers gave much insight, other than it 'could be a gfx card driver issue'. I'm using new hardware that has no issues with Mint, Win7 or WinXp. BUT note, I'm not dual booting, its a complete fresh install formatting the entire drive. Any help is appreciated as I'd really like to get stuck into Ubuntu. Thanks in advance. -Luke

    Read the article

  • How do i fix the slow scroll in browsers and high XOrg cpu usage

    - by Virgil
    I am facing an issue while scrolling in browsers(firefox, chrome, and opera) , scroll is jagged and slow. Also when scrolling the cpu usage spikes. I am currently running ubuntu natty(beta 1), switched from ubuntu 10.10 where the problem was worse. I am using the nvidia beta driver, which ubuntu installed automatically. My graphic card is nvidia Quadro NVS 150M. I tried running ubuntu without the effects on , but when using multiple applications at the same time xorg usage spikes again. Additional info: 2GB of RAM and an intel core 2 duo processor. Any help would be greatly appreciated. Thanks in advance!

    Read the article

  • 13.04 gnome problem with drag and drop and text selection

    - by Laurent BERNABE
    I have an ubuntu 13.04 gnome 64 bits, but since a few days I am facing serious problem for doing simple drag an drop : in nautilus, in eclipse, in the browser. Also I can't manage to select text areas with the mouse (the only way I found is to double click on the first word, then expand selection with shift and arrows keys). I noticed that often, after having started a drag n drop, it is cancelled though I did not release the left mouse ! It is as if for each simple mouse clic : two was done ! My graphic card is an ati radeon hd 4330, and I had installed the default purposed driver. I don't know if I should give you results from some terminal commands, as I don't know which could be useful. Thanks in advance.

    Read the article

  • Is there other ways to do insert/update/delete on a remote oracle database?

    - by gunbuster363
    I asked a question recently concerning the speed of execution of insert/update/delete using JDBC driver in a remote machine, but the problem cannot be solved easily. I would like to ask, is there any other way to execute the insert/update/delete to the oracle? The current situation is this: the DB is on a seperate machine than the java program used to update the DB. I looked up the internet and found people suggesting using pure sql or pl/sql to do the update, is that possible? And do we need to operate the sql or pl/sql in a local machine? Because I have no knowledge about pl/sql, so I am not sure if we can create some kind of script and call it on a remote machine. Let say the situation is like this: the input data is on machine A, and the original java program are also on machine A, but the oracle is on machine B. is there any other approach other than JDBC?

    Read the article

  • How can I my video card work on Ubuntu 12.04?

    - by Cyriak Burton
    I've recently installed Ubuntu 12.04 on my desktop computer. In order to install Ubuntu, I had to unplug my video card because It was giving me problems, didn't allow me to install Ubuntu. So I unplug it, installed Ubuntu anyway, everything worked as charm, but now and I need to plug it again, but it doesn't work. Here some photos of the problem: Screenshot of the problem #1 Screenshot of the problem #2 Appear that screen and nothing else... I didn't install any driver (I'm kinda noob), in Windows 7 all worked fine, so the problem is with Ubuntu, compatibility problem I guess. Video Card: Zotac GeForce GT 240 O.S.: Ubuntu 12.04 (w/GNOME 3.2) Memory: 2 Gb HDD: 110 Gb Processor: Intel Pentium D 2.80 Ghz PLEASE HELP!!!

    Read the article

  • ubuntu 12.10 graphic does not works correctly

    - by Amin
    I have installed Ubuntu 12.10 but my graphic does not works correctly. I used this command to installation: sudo apt-get install fglrx fglrx-amdcccle fglrx-dev But after the restarting my system, the side panel and upper one does not appear any more! I guessed it maybe that I used some incompatible packages so I removed the graphic card driver by this command: sudo apt-get purge fglrx fglrx-amdcccle fglrx-dev and tried it from graphical way from system setting > Software Sources > Aditional drivers and choosed the second option then applied change. But the resault waas such as before way!! I belive it is because of the Ubuntu does not know my graphic card. I am using VAIO VPCEA2TGX (N/A) and my graphic cart version is Mobility Radeon HD 5400 Series if it is matter. So now what is the exact problem and what I have to solve this?

    Read the article

  • How can I connect my HP Photosmart C3100 printer in 10.04 (regression from 9.x)

    - by Brian
    My printer was working under 9.x. It is a an HP Photosmart C3100 series. When I open Admin-Printing no local printers are found. I try to add via Other (My local choices are Serial and other). I have tried many url's - ipp://localhost:631/ipp, http://localhost/ipp, localhost, 127.0.0.1, etc... None have worked. Under the networked I have tried JetDirect, using localhost and 127.0.0.1 and port 631. I have tried many options under IPP with different variants in the host trying to verify a printer. No luck .I tried LPD/LPR with localhost and tried the probe. no luck. I tried the cups admin via localhost:631 and that didn't work. On the old version its simply found the local printer, I might have picked the driver, I can't remember but it was the photosmart c3100 series that was working.I just can't get 10.04 to print.

    Read the article

  • My local ubuntu server is not updated

    - by Rakesh Manandhar
    I am from Nepal and it's faster to download apps from server for nepal using through ubuntu software center. But when i use np.archive.ubuntu.com server. There is no updated softwares and few softwares and nvidia driver are outdated. for e.g. i cannot even install openshot when i user server for nepal. It provides error which cannot be solved. I want to know how can the server for nepal be updated frequently with us.archive.ubuntu.com. i use ubuntu 12.10. and i want to use server for nepal since the download speed faster than 2x than from us server.

    Read the article

  • How can a Cisco Aironet wireless card connect to a WPA encrypted network?

    - by Aibara Iduas
    I have a Thinkpad T40 running Ubuntu 10.10. I want to connect to wireless networks with WPA encryption; they appear in the network list, but are grayed out. The card does support WPA, since it works in Windows. In 10.10 the wireless works just fine with unprotected and WEP networks, but cannot connect to any WPA networks. The card is a Cisco Aironet Wireless 802.11b. I've been reading a lot of forum posts trying to find a solution, but either encounter threads where no solution was found or answers longer apply (most date from 2007, since this isn't the newest of computers). Here is the output of sudo lshw -c network: *-network:1 DISABLED description: Wireless Interface product: Cisco Aironet Wireless 802.11b vendor: AIRONET Wireless Communications physical id: 2 bus info: pci@000:02:02.0 logical name: eth1 version: 00 serial: 00:02:8a:78:6a:44 width: 32 bits clock: 33MHz capabilities: pm vpd bus_master cap_list rom ethernet physical wireless logical configuration: broadcast=yes driver=airo latency=64 maxlatency=4 mingnt=4 multicast=yes wireless=IEEE 802.11-DS Thanks, any help would be greatly appreciated!

    Read the article

  • Lubuntu 13.04 Resolution Issue du to ppa makson96

    - by Choupa
    I've installed Lubuntu 13.04 on my notebook. (It's the first time I use Lubuntu) I had graphical issue, apparently due to the graphic driver (ATI Radeon Xpress 1200) I followed this procedure to correct my problem : sudo add-apt-repository ppa:makson96 sudo apt-get update sudo apt-get upgrade sudo apt-get install fglrx-legacy My graphical issue has been corrected but now it shows a low resolution (1024*768) and I can't change it. the xrandr result : xrandr: failed to get size of gamma output default Screen 0: minimum 1024x768, current 1027x768, maximum 1024x768 default connected 1024x768+0+0 0mmx0mm 1024x768 0.0* I've already read this topic but I don't really understand how things work there. I'd really appreciate your help ! Many thanks !

    Read the article

  • Radeon Open Source Drivers Configuration

    - by Andy Turfer
    How does one configure the Radeon Open Source drivers? I have just installed Ubuntu 12.10 and want to try the Open Source drivers instead of the proprietary AMD binaries. After the installation, the driver seems to be installed, I have wobbly windows working (can't use a PC without wobbly windows!), and life is generally good. I have a problem when I connect a secondary monitor. Performance is killed (everything becomes laggy and jerky) and my laptop sits on the right-hand side of the monitor, not the left. I'd like to know how to turn off the Laptop's monitor so I'm just using the external monitor. How can I do this using the Open Source Radeon drivers? I can't find a GUI management tool, and there's no longer an xorg.conf. What to do?

    Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >