Search Results

Search found 16059 results on 643 pages for 'global temp tables'.

Page 301/643 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• ASA 5505 stops local internet when connected to VPN

  - by g18c

  Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

  Read the article

• Does Ubuntu Server have any sort of cron job to automatically clear /tmp?

  - by DWilliams

  I know it clears out /tmp on reboots, but I haven't been able to find any sort of cron job on my server that clears /tmp. I recently set up a script that writes lots of files to /tmp and my server usually goes several months between reboots so I'm concerned about it being cluttered. I've seen several other distros that have a tmpwatch script installed by default. Ubuntu's repository seems to have replaced tmpwatch with tmpreaper. Is there any mechanism in place on Ubuntu (8.04 currently, soon to be upgraded to 10.04 when I get around to it) to clean up temp files on a server that doesn't regularly reboot or do I need to install tmpreaper?

  Read the article

• Graphical MySQL tools

  - by Shlomo Shmai

  Are there any good graphical tools (preferably free) for navigating a MySQL database? I find myself doing a lot of the same SQL queries to look at data in the tables. I would imagine there's a GUI for doing this that makes life easier. Any one know of such a thing? Thanks a lot.

  Read the article

• Weird execution of ruby/git executables in Windows

  - by Frexuz

  Something strange has happened. I can't run some command line executables in Windows anymore. Steps: Open cmd Run an executable, such as ruby -v or git -h When I do that, a new command prompt opens, running that command (I think, it's too fast to see), and instantly closes again. I've managed to print screen the new command prompt, and it shows that it's running inside this path: C:\Documents and Settings\Administrator\Local Settings\Temp\3582-490 Inside this folder, is the executable I'm tring to run. If I run ruby, then ruby.exe is in there. If I run git, then git.exe is in there. And it's always emptying the folder in between, so there is always just one .exe file

  Read the article

• FreeNAS - how to "Exclude from file" in Rsyncd (GUI)

  - by user179181

  I am trying to set rsync tasks to Pull user profiles from 11 Windows machines running DeltaCopy Server and then configure ZFS periodic snapshot tasks for a backup solution. So far this has been working fine, although i would like to exclude certain file types like .DAT or NTUSER.DAT. My Exclusion file resides on the local ZFS Dataset (Receiving side) and is as follows: Temp Temporary Internet Files NTUSER.DAT NTUSER.DAT.LOG *.dat *.tmp *.DAT.log *.ost *.pst The command i typed under Auxiliary Parameters (Rsyncd Global Conf under services)is as follows: exclude from = /mnt/Storage/User_Profiles/exclude.txt Ive tried deleting the .DAT files from the receiving end and just as i start to get excited i click refresh and there they are again

  Read the article

• How Do I Restrict Views of a Custom List by Group in Sharepoint 2007?

  - by Crash893

  I'm pretty new to Sharepoint and what I would like to do is create a huge master list of all our employees and then make different "views" on that person depending on the persons group For example: A new employee might have Salary info Security info Personnel info Contract info I would like to have all that in one row (per employee) but then when someone from the hr group logs in they can only see Personnel and Salary or something like that. If that is not an option is there a way to link tables across different lists?

  Read the article

• DNS with name.com and Amazon S3

  - by aledalgrande

  I have a website on a bucket in Amazon S3, and recently started to get emails from Google "Googlebot can't access your site". When I go to Webmaster Tools and I try to fetch in fact it doesn't work. Also people in locations different from mine sometimes reported they could not access the website. Now for curiosity I tried from my terminal: $ host xxx xxx is an alias for xxx.s3-website-us-west-1.amazonaws.com. xxx.s3-website-us-west-1.amazonaws.com is an alias for s3-website-us-west-1.amazonaws.com. s3-website-us-west-1.amazonaws.com has address yyy.yyy.yyy.yyy And when I try with dig: $ dig xxx ; <<>> DiG 9.8.3-P1 <<>> xxx ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 17860 ;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;xxx. IN A ;; ANSWER SECTION: xxx. 300 IN CNAME xxx.s3-website-us-west-1.amazonaws.com. xxx.s3-website-us-west-1.amazonaws.com. 60 IN CNAME s3-website-us-west-1.amazonaws.com. s3-website-us-west-1.amazonaws.com. 60 IN A yyy ;; Query time: 1514 msec ;; SERVER: 75.75.75.75#53(75.75.75.75) ;; WHEN: Fri Aug 22 12:32:13 2014 ;; MSG SIZE rcvd: 127 It seems OK to me. Why would Google tell me there is a DNS error? UPDATE: Google also cannot fetch robots.txt, but I can fetch it from my browser. UPDATE 2: I have a forwarding on the root to the www.* hostname: $ dig thenifty.me ; <<>> DiG 9.8.3-P1 <<>> thenifty.me ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 49286 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;thenifty.me. IN A ;; AUTHORITY SECTION: thenifty.me. 300 IN SOA ns1hwy.name.com. support.name.com. 1 10800 3600 604800 300 ;; Query time: 148 msec ;; SERVER: 75.75.75.75#53(75.75.75.75) ;; WHEN: Fri Aug 22 13:32:56 2014 ;; MSG SIZE rcvd: 88

  Read the article

• Robocopy hiding folders on backup drives

  - by Neil Barnwell

  I have a backup batch file that uses Robocopy to backup my files: robocopy "C:\" "G:\Default\RoboCopyBackup\C" /XF Pagefile.sys /XD "System Volume Information" "Recycler" "Temporary Internet Files" "Installer Cache" "Temp" /E /R:1 /W:0 /TEE /XJ This should create a folder structure on the external backup drive like so: G:\Default\RoboCopyBackup\C\... However, G: appears totally empty. What is weird, is that the folders and files are there! If I type the above path into the address bar, I see all the files and folders! Can anyone help me work out why? I think it might be some NTFS-based ownership/permissions thing but I'm not sure.

  Read the article

• way to back up sql server 2005 database to just get the data and objects

  - by Caveatrob

  I'm trying to do a nightly backup of a SQL Server 2005 database to get the leanest, smallest file that includes all the table data, stored procedures, views, and functions. I'm downloading and saving this daily in case the server isn't available and I need to just get some data out. I don't care about the logs or any other parts of the DB but the data, procs, tables, and functions. What's the easiest way to get just this information backed up?

  Read the article

• SCCM not processing hardware Inventory

  - by Sreekumar

  We have some workstations that will not import hardware inventory into the SCCM 2007 database. What I've done: Client - verified workstation object is discovered in SCCM - installed ccm client on workstation - manually ran hardware inventory action - verifed Inventory report was sent successfully "Successfully sent report Destination:mp:MP_HinvEndpoint, ID ..... - watched file on client enter and exit temp folder on client. - successfully ran MP Spy to verify client communicates with server - uninstalled client, deleted ccm and ccmsetup folders and reinstalled. Server - no entries in MP_Hinv.log file that coorespond with time stamp of workstation - no entries in dataldr.log file that coorespond with time stamp of workstation Where are these files going? All T/S blogs expect entries in these logs. This is driving me crazy.

  Read the article

• MySQL privilege needed to grant "SHOW INDEX" access

  - by Ztyx

  I'd like a monitor user be able to (only) execute "SHOW INDEX" and "SHOW TABLES" on a certain database. What privileges should I GRANT this user? I'd rather not open up for the user to be able to do SELECTs...

  Read the article

• Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

  - by Adam Ryczkowski

  Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

  Read the article

• Phpmyadmin mysql foreign key problem

  - by alan

  Hey guys i'm using phpmyadmin (php & mysql) and i'm having alot of trouble linking the tables using foreign keys. I'm getting negative values for the field countyId (which is the foriegn key). However it is linking to my other table fine and it's cascading fine. So when I go to add data there will be a drop box for the CountyId and the values will look something like this, " -1 1- " Here is my alter statement, ALTER TABLE Baronies ADD FOREIGN KEY (CountyId) REFERENCES Counties (CountyId) ON DELETE CASCADE

  Read the article

• RoboCopy Log Files missing whitespace?

  - by TwystNeko

  So I'm working on a script to use RoboCopy to copy a bunch of files, and log what it's copied. It works reasonably well, except for the logfiles. They tend to look like this: C:\Users\Tech\Documents\desktop.initechscan1.jpgtechscan2.jpgtechscan3.jpgtechscan4.jpgtechscan5.jpgwsus.jpgwsus2.jpgC:\Users\Tech\Documents\My Music\C:\Users\Tech\Documents\My Pictures\C:\Users\Tech\Documents\My Videos\C:\Users\Tech\Documents\My Digital Editions\ As you can see, the log seems to be missing all whitespace and separators between entries. Is there something I can do to fix this? It's kind of frustrating. The commandline I'm using is this: C:\Users\Tech\Desktop>Robocopy.exe C:\Users\Tech\Documents c:\Temp /e /l /b /xj /xf ntuser.* desktop.ini *.lnk /np /njh /log:migratedfiles.txt /v I have the /l in there since I'm debugging, and it's the easiest way to keep from copying everything a million times.

  Read the article

• KDE on Windows won't download/install

  - by endolith

  No matter which mirror I use, I get this error. I've tried a few times over the last several weeks. Download failed --------------------------- The download of ftp://kde.mirrors.tds.net/pub/kde/stable/4.5.4/win32/libopensp-vc100-1.5.2-bin.tar.bz2 failed with error: archive downloaded from ftp://kde.mirrors.tds.net/pub/kde/stable/4.5.4/win32/libopensp-vc100-1.5.2-bin.tar.bz2 checksum error --------------------------- Retry Ignore Cancel Should I just ignore this and let it continue? Update: I ran as administrator, changed the install directory to C:\KDE, and ignored this error, and it seemed to install, but then gave me a different error, same file: Error --------------------------- Internal Error - File C:/Temp/KDE/libopensp-vc100-1.5.2-bin.tar.bz2 does not exist --------------------------- Cancel But now programs seem to work! Should I just ignore this error? I can't even find a plain English explanation of what libopensp is.

  Read the article

• SQL Server tempdb size seems large, is this normal?

  - by Abe Miessler

  From what I understand the system database is used to hold temporary tables, intermediate results and other temporary information. On one of my database instances I have a tempdb that is seems very large (30GB). This database has not been modified (as in "last modified date" on the mdf file) in over a week. Is it normal to have the temp db remain that large for that long of a period? It seems to me that it should be updating fairly often and returning space that it is using fairly quickly... Am I way off here or is SQL Server doing something weird? FYI: This is a SharePoint 2010 database, not sure if that makes a difference.

  Read the article

• Dump Microsoft SQL Server database to an SQL script

  - by Matt Sheppard

  Is there any way to export a Microsoft SQL Server database to an sql script? I'm looking for something which behaves similarly to mysqldump, taking a database name, and producing a single script which will recreate all the tables, stored procedures, reinsert all the data etc. I've seen http://vyaskn.tripod.com/code.htm#inserts, but I ideally want something to recreate everything (not just the data) which works in a single step to produce the final script.

  Read the article

• Missing disk space in Windows XP

  - by Jørn Schou-Rode

  On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

  Read the article

• Windows 7 Ultimate x64 / Safari / Downloads disappear

  - by Dayton Brown

  Hi All, Running Safari 4.0.5. When I download a file, it never appears in the download folder. If I pause the download I get the xxxxxx.xxx.download temp file to show up. When I then resume the download, it will finish, but will never rename the file to xxxxx.xxx. I've heard from some other posts that AV seems to have a hand in it, but I'm running clamwin av which doesn't have an in memory av process. Any help is appreciated.

  Read the article

• Optimize SAP SQL Server database using DTA

  - by Danilo Brambilla

  Is it safe to optimize a SQL Server 2005 SAP R/3 database using Database Tuning Advisor raccomandatations? We are experiencing very low performance on a dedicated SAP database because of intense read operations ad the db and DTA suggest to create about 25 indexes and 100 stats. I am not an expert of SAP and I am quite surprised to see that this database has about 56.000 tables and 6500 views (120 GB of data). Thank you all for help

  Read the article

• Apps not starting on Mac OS X Lion

  - by KPS

  I have a strange problem, some apps that I download do not launch. There are 2 scenarios The application starts but keeps bouncing, once I click the bouncing icon in the tray it disappears. The process also closes in activity monitor The application fails to start, how ever many times I launch it, it refuses. The process does not even show up in activity monitor What I have done so far to resolve: Repaired permissions Clear all cache/temp using CleanMyMac Used DiskWarrior via OS and not during boot Additional Info: Model Name: MacBook Pro Model Identifier: MacBookPro5,2 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 6 MB Memory: 8 GB Bus Speed: 1.07 GHz Boot ROM Version: MBP52.008E.B05 SMC Version (system): 1.42f4

  Read the article

• Switch flooding when bonding interfaces in Linux

  - by John Philips

  +--------+ | Host A | +----+---+ | eth0 (AA:AA:AA:AA:AA:AA) | | +----+-----+ | Switch 1 | (layer2/3) +----+-----+ | +----+-----+ | Switch 2 | +----+-----+ | +----------+----------+ +-------------------------+ Switch 3 +-------------------------+ | +----+-----------+----+ | | | | | | | | | | eth0 (B0:B0:B0:B0:B0:B0) | | eth4 (B4:B4:B4:B4:B4:B4) | | +----+-----------+----+ | | | Host B | | | +----+-----------+----+ | | eth1 (B1:B1:B1:B1:B1:B1) | | eth5 (B5:B5:B5:B5:B5:B5) | | | | | | | | | +------------------------------+ +------------------------------+ Topology overview Host A has a single NIC. Host B has four NICs which are bonded using the balance-alb mode. Both hosts run RHEL 6.0, and both are on the same IPv4 subnet. Traffic analysis Host A is sending data to Host B using some SQL database application. Traffic from Host A to Host B: The source int/MAC is eth0/AA:AA:AA:AA:AA:AA, the destination int/MAC is eth5/B5:B5:B5:B5:B5:B5. Traffic from Host B to Host A: The source int/MAC is eth0/B0:B0:B0:B0:B0:B0, the destination int/MAC is eth0/AA:AA:AA:AA:AA:AA. Once the TCP connection has been established, Host B sends no further frames out eth5. The MAC address of eth5 expires from the bridge tables of both Switch 1 & Switch 2. Switch 1 continues to receive frames from Host A which are destined for B5:B5:B5:B5:B5:B5. Because Switch 1 and Switch 2 no longer have bridge table entries for B5:B5:B5:B5:B5:B5, they flood the frames out all ports on the same VLAN (except for the one it came in on, of course). Reproduce If you ping Host B from a workstation which is connected to either Switch 1 or 2, B5:B5:B5:B5:B5:B5 re-enters the bridge tables and the flooding stops. After five minutes (the default bridge table timeout), flooding resumes. Question It is clear that on Host B, frames arrive on eth5 and exit out eth0. This seems ok as that's what the Linux bonding algorithm is designed to do - balance incoming and outgoing traffic. But since the switch stops receiving frames with the source MAC of eth5, it gets timed out of the bridge table, resulting in flooding. Is this normal? Why aren't any more frames originating from eth5? Is it because there is simply no other traffic going on (the only connection is a single large data transfer from Host A)? I've researched this for a long time and haven't found an answer. Documentation states that no switch changes are necessary when using mode 6 of the Linux interface bonding (balance-alb). Is this behavior occurring because Host B doesn't send any further packets out of eth5, whereas in normal circumstances it's expected that it would? One solution is to setup a cron job which pings Host B to keep the bridge table entries from timing out, but that seems like a dirty hack.

  Read the article

• MySQL asking a user for SUPER privilege to perform a delete.

  - by Fran

  Hello, When trying to do a delete operation on a table, mysql reports the following error: Error code 1227: Access denied; you need the SUPER privilege for this operation. However, my user has this privilege granted for all tables in the schema: GRANT ALL PRIVILEGES ON myschema.* TO 'my_admin'@'%' How come it asks me for SUPER privilege for a delete? Thanks in advance.

  Read the article

• Are there any reasons to duplicate table in the same database ?

  - by bob

  Let says we have several MySQL server, one master and some slaves. A member table which contains more than 5.000.000 peoples. Are there any reasons (performance, atomicity, etc..) to use duplicate tables like member_1, member_2, member_3 and then switch randomly when doing operation on it ? (especialy SELECT query) ?

  Read the article

• Kernel appears to have no modules

  - by George Reith

  Useful info: OS: CentOS 5.8 final Kernel: 2.6.32-042stab056.8 My kernel came prebuilt with the server, I don't know anything about kernels and not a lot about linux however as far as I do know I should have some modules loaded by the kernel. I came across this problem because I am unable to run iscsi as it is expecting certain modules to be loaded. lsmod returns nothing. depmod -a returns: WARNING: Couldn't open directory /lib/modules/2.6.32-042stab056.8: No such file or directory FATAL: Could not open /lib/modules/2.6.32-042stab056.8/modules.dep.temp for writing: No such file or directory I have rebooted and nothing has changed. Does anyone know why this is happening?

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >