Search Results

Search found 21809 results on 873 pages for 'display interfaces'.

Page 302/873 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• Font for Wine that supports the entire character set of the Win32 Console?

  - by Brian Campbell

  I would like to be able to display in the Wine console all characters that the Win32 console can display. I've written a small test program to print out all 8-bit characters: #include <stdio.h> int main(int argc, char *argv[]) { int i, j; for (i = 0; i <= 0xF0; i+=0x10) { for (j = i; j <= i + 0x0F; ++j) printf("%2x:%c", j, (char)j); printf("\n"); } getchar(); return 0; } Under Wine, the best I can do so far is using Andale Mono: While this is what I see on Windows Server 2008: Is there anywhere I can legally download a font that will allow me to view all of those characters under Wine? edit I've found a set of DOS fonts that includes a CP437 font, which should cover the character set I'm interested in. However, even if I install this font, wineconsole doesn't seem to recognize it. Is there any way I can get wineconsole to use this font, or convert this font to a format that wineconsole can use? Or is there any way I can extract fonts from DOSEMU for use in Wine? Oh, and I should probably mention that I'm on Mac OS X 10.6.2, installing Wine via MacPorts, using the wine-devel package. more information I have tried installing some console fonts that should cover the full character set as Mac OS X fonts (such as the NewDOS font listed above, and a font I tried converting from the fonts supplied by DOSEMU). Wine does not seem to pick up on new fonts installed in Mac OS X. Is there a way to register new fonts I've installed with Wine? Would manually editing the system.reg file that seems to contain font mappings work, or is there something else I'd need to do? bump Bounty ends soon, I'm still looking for an answer for this. Does anyone use the Wine console for complex text user interfaces?

  Read the article

• Using VMWare Workstation, to convert a physical Win2008 into a templtae

  - by SndLt

  I'm new to VMware and despite having read the documentations, I'm having trouble. I'm using VMware workstation Stand-Alone package to turn a physical Win Server 2008 R2 into a usable VM appliance. The source and destination part is getting me here. It seems using keyword "localhost" doesn't cut all the way through. Does the shared folder have to be in my local drive for that matter? For ip, am I using the simple private IP that my nearest DHCP has given me? But what if I have more than one interfaces that have two or three different private ip addresses? Thanks.

  Read the article

• Cisco asa 5505 locks up / unresponsive

  - by Chris

  We have a cisco asa 5505 that's new (in service for about 2 months) running 7.2(4) software. Every day around 10a it locks up for approx 10 minutes. We're monitoring it via snmp with stg, and snmp doesn't respond during that time. There's no output in the 'show crash' output. Internet connectivity is also dropped. Wondering if anyone else has seen this and what the fix might be. Currently we're looking at upgrading software, but will need memory upgrade for that. We've forced the speed and duplex on the internal and external interfaces, but the problem is still occurring. It's connected on the internal lan to a netgear 724 gige switch.

  Read the article

• SQL Server 2008 is not accessible from Windows Server 2008 ?

  - by Albert Widjaja

  Hi, I have successfully configured Windows Server 2008 Enterprise SP2 with SQL Server 2008 Enterprise SP2 all 64 bit, however when I tried to access this particular SQL Server 2008 DB instance from another SQL Server 2008 SSMS in another Windows Server 2008 it failed ? what I did is to disabled the IPv6 IP address using the regedit but still the problem hasn't been fixed even after restart ? I have enabled the named piped as well but still no luck ? any help please ? Here's the error message: " A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) "

  Read the article

• How to set the preferred network interface in linux

  - by Mike Cooper

  I have my network set up like this. http://docs.google.com/Doc?docid=0AZ1YxuLE4djaZGhqN2s1NmRfMjhjNjc0Ym1meg&hl=en In words: I have a machine (Calcium, running Arch Linux) that has two network interfaces. eth0 is hoooked up to a router, and is gigabit. Eth1 is hooked up directly to the university network over 10Megabit. The router's uplink is hooked up to the university network as well, and it is also 10Megabit. Currently (I believe) all traffic on Calcium is going through eth0, through the router, regardless of whether it is internal or external. (How can I confirm this?) Ideally, traffic that is destined for the internal network (192.168.10.0/24) would travel over eth0 to the router, and wherever it is going. ALL other traffic should go over eth1.

  Read the article

• Can a faulty DNS record prevent networking?

  - by Bob

  My server's network interfaces are not available anymore since yesterday evening. I didn't change anything, but I added a new DNS-record shortly before. Unfortunately, the web interface I used to add this DNS record escaped some characters, so I've got a faulty DNS record: example.com 86400 IN TXT "\"v=spf1 mx a -all\"" However, this is the only unusual thing I could notice about this. Is it possible that the \-characters in my DNS record are confusing for some routers? Or could it be the system itself which is confused by this (it's a Debian Lenny system). Unfortunately, I can't quick-test it because of the long TTL of the record.

  Read the article

• nxclient crashes when trying to open a terminal from a remote client through "ssh -Y"

  - by user167328

  I support around 150 linux machines. I have 2 virtual machines on an ESXi server which I access via nxmachine v3 from a windows 7 box. These machines run CentOS5 with KDE and Lubuntu12.04.1 and they are the admin GUIs from which I support the 150 machines. The linux machines which I manage are redhat4/5, CentOS5 and ubuntu 10 and 12. Normally I contact the machines via ssh -Y. Today I did an ssh -Y to a remote machine which is running Ubuntu 12.10 and ssh 6.0p1. Then I tried to open an lxterminal on the remote machine which should display on my KDE desktop. This immediately and reproducably crashed my nxclient session. I tried again from my lubuntu system with the same effect. I have not observed the phenomenon from other machines yet. The message log on my KDE host shows: Unexpected termination of nxagent because of signal: 11 Logger::log nxnode 3920 Googling for this revealed no usable answer. Does anybody have a clue what is going on here or can give a hint how to solve the issue? Add On: I asked the user at the remote machine to export his DISPLAY to my host and open an lxterminal. This worked without problems i. e. the nxclient did not crash. Then the user tried to send me xeyes and this also killed the nxclient with the same error message found in the message log as above. This makes me suspect that the problem is not solely connected to ssh but maybe to some library stuff.

  Read the article

• Snow Leopard takes a long time to connect to Windows/Samba server

  - by hood

  We run a very heterogeneous network here: There is some XP, Vista, 7, Leopard, Snow Leopard clients, and Windows 2003 (one remaining legacy app), 2008, and Linux servers. The main file server runs Ubuntu Linux and has been added to the Windows Domain and has been used for many years; SBS 2008 is the PDC (the 2003 and 2008 are on the domain also). In Leopard there were no problems at all authenticating to the file servers. We've upgraded one of the Leopard iMacs to Snow Leopard, though the same problem occurs in a new MBP which came with the newer OS as well as a clean install on another iMac. It does not matter whether connected through wired or wireless. In the Finder when clicking on the server - whether on first boot or after it is connected - it will display "Connecting..." for up to a few minutes before either generally working (if username/password in keychain) or displaying "Connection Failed" - at which time clicking "Connect As" and typing in the username/password will take some more time and eventually work. Sometimes it will display "Connecting..." indefinitely. (I've left it as long as 15 minutes before trying something else) Accessing shares on the the 2003 and SBS servers have the problem (so I don't think it's a Samba server issue). The Server 2008 Standard is connecting instantly at the moment. Accessing the share through an alias/stacks doesn't have this problem. Leopard and Windows clients still have no problem. I've searched Google but hasn't yielded any working result. How do I get rid of this delay?

  Read the article

• How should I isolate computers with different roles on a network

  - by fishhead

  I work in an industrial plant and we have one network(physical wire) that us used for both office usage and for process systems. The office computers are only used for typical office needs but occasionally do connect to the process computers to obtain information from a sql server or for some other purpose. A new initiative is in the works and is rolling down hill from corporate and that is to standardize how the the computers are used at work and they would be severely locked down and only a standard set of applications will be allowed to execute. one of the requirements is to also have non office computers isolated from the company domain. our non-office computers are a mix of Man-Machine interfaces and sql-servers all running software that non standard. My question is, how can we divorce the control systems computers from the company domain but still have access to the servers from the company domain. thanks

  Read the article

• How should I isolate computers with different roles on a network

  - by fishhead

  I work in an industrial plant and we have one network(physical wire) that us used for both office usage and for process systems. The office computers are only used for typical office needs but occasionally do connect to the process computers to obtain information from a sql server or for some other purpose. A new initiative is in the works and is rolling down hill from corporate and that is to standardize how the the computers are used at work and they would be severely locked down and only a standard set of applications will be allowed to execute. one of the requirements is to also have non office computers isolated from the company domain. our non-office computers are a mix of Man-Machine interfaces and sql-servers all running software that non standard. My question is, how can we divorce the control systems computers from the company domain but still have access to the servers from the company domain. thanks

  Read the article

• NMap route determination on Windows 7 x64

  - by user30772

  C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

  Read the article

• Windows Server 2003 Router with PortForwarding

  - by jM2.me

  Hello, I am owning a small company and we have purchased a server to setup few server applications on it as well as other software. We would like to setup our network in following way Internet<-WindowsServer2003 as router<-Switch<-Office Computers Server has two nic interfaces and we have 24ports 1GB network switch connected to one nic and internet connection to another nic. Our ISP is Frontier and we have Fios 25/25. We get network cable out of ONT box directly connected to our server. There are no modems/routers. Setting up DHCP on windows 2003 is easy job but we would like to have the ability to port forward some ports from office computers. I have some knowledge in networking but not as much. How could I setup FHCP server on win2k3 with the ability to port forward some ports to office computers? Thank you for your time

  Read the article

• CARP: two machines think they're the master, but only on one interface

  - by Conor McDermottroe

  I have two machines, each configured identically as a firewall/load balancer for a busy website. I have set them up with CARP and pfsync on both the internal and external interfaces. The internal interface is behaving as expected (primary listed as MASTER and secondary listed as BACKUP) On both machines, the network interfaces are as follows: em0 - External interface bge0 - Internal interface bge1 - Crossover connection between both machines carp0 - Shared external interface for CARP carp1 - Shared internal interface for CARP I've rewritten the IP addresses and MAC addresses below. The networks are as follows: 10.0.1.0/24 - External network 10.0.2.0/24 - Internal network 10.0.3.0/24 - Crossover network Here's the output from ifconfig on the primary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.10 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.10 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.10 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.11 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 0 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: MASTER vhid 2 advbase 1 advskew 0 And here's the /etc/rc.conf excerpt from the primary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.10 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.10 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.11" And here's the output on the secondary: em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether [SNIP] inet 10.0.1.11 netmask 0xffffff00 broadcast 10.0.1.255 media: Ethernet 100baseTX <full-duplex> status: active bge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.2.11 netmask 0xffffff00 broadcast 10.0.2.255 media: Ethernet 1000baseT <full-duplex> status: active bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether [SNIP] inet 10.0.3.11 netmask 0xffffff00 broadcast 10.0.3.255 media: Ethernet 1000baseT <full-duplex> status: active lo0: flags=80c9<UP,LOOPBACK,RUNNING,NOARP,MULTICAST> metric 0 mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33152 pfsync0: flags=0<> metric 0 mtu 1460 pfsync: syncdev: bge1 syncpeer: 10.0.3.10 maxupd: 128 carp0: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.1.5 netmask 0xffffff00 carp: MASTER vhid 1 advbase 1 advskew 20 carp1: flags=49<UP,LOOPBACK,RUNNING> metric 0 mtu 1500 inet 10.0.2.5 netmask 0xffffff00 carp: BACKUP vhid 2 advbase 1 advskew 20 And here's the /etc/rc.conf excerpt from the secondary: defaultrouter="10.0.1.1" network_interfaces="em0 bge0 bge1 lo0 pfsync0" cloned_interfaces="carp0 carp1" ifconfig_em0="inet 10.0.1.11 netmask 255.255.255.0 media 100BaseTX mediaopt full-duplex" ifconfig_bge0="inet 10.0.2.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_bge1="inet 10.0.3.11 netmask 255.255.255.0 media 1000BaseTX mediaopt full-duplex" ifconfig_carp0="vhid 1 pass [SNIP] advskew 20 10.0.1.5/24" ifconfig_carp1="vhid 2 pass [SNIP] advskew 20 10.0.2.5/24" pfsync_enable="YES" pfsync_syncdev="bge1" pfsync_syncpeer="10.0.3.10" What I don't understand is, the carp status on carp0 is MASTER on both machines when the status on carp1 is as it should be (MASTER on the primary and BACKUP on the secondary). What am I missing? Where should I be looking for clues?

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• SNMP counter issues with cisco RV082

  - by Chance

  Does anyone else poll this router with SNMP? We are using firmware version: 2.0.0.19-tz We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing problems is that they roll over (at 65,000) to 0 in less than our minute polling cycle, really skewing our metrics. The counter for the Lan (interface 2) seems to be functioning properly, however interfaces 3 and 4 (WAN and DMZ / WAN2) rollover at 65000. Tue May 11 08:38:31 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865677943 IF-MIB::ifInOctets.3 = Counter32: 12450 IF-MIB::ifInOctets.4 = Counter32: 49354 Look at counter IF-MIB::ifInOctets.4 5 seconds later: Tue May 11 08:38:36 EDT 2010 IF-MIB::ifInOctets.1 = Counter32: 137634 IF-MIB::ifInOctets.2 = Counter32: 1865836207 IF-MIB::ifInOctets.3 = Counter32: 13167 IF-MIB::ifInOctets.4 = Counter32: 12900 Any suggestions? Seems like a bug to me, however I just wanted to make sure I wasn't crazy.. Thanks!

  Read the article

• firehol (firewall) with bridge: how to filter

  - by Leon

  I have two interfaces: eth0 (public address) and lxcbr0 with 10.0.3.1. I have a LXC guest running with ip 10.0.3.10 This is my firehol config: version 5 trusted_ips=`/usr/local/bin/strip_comments /etc/firehol/trusted_ips` trusted_servers=`/usr/local/bin/strip_comments /etc/firehol/trusted_servers` blacklist full `/usr/local/bin/strip_comments /etc/firehol/blacklist` interface lxcbr0 virtual policy return server "dhcp dns" accept router virtual2internet inface lxcbr0 outface eth0 masquerade route all accept interface any world protection strong #Outgoing these protocols are allowed to everywhere client "smtp pop3 dns ntp mysql icmp" accept #These (incoming) services are available to everyone server "http https smtp ftp imap imaps pop3 pop3s passiveftp" accept #Outgoing, these protocols are only allowed to known servers client "http https webcache ftp ssh pyzor razor" accept dst "${trusted_servers}" On my host I can connect only to "trusted servers" on port 80. In my guest I can connect to port 80 on every host. I assumed that firehol would block that. Is there something I can add/change so that my guest(s) inherit the rules of the eth0 interface?

  Read the article

• Smoothwall Express interface issues

  - by Timbermar

  I have a SmoothWall Express box that is currently configured with a Green and Purple interface. Both interfaces are in the same /24 subnet (which seems odd to me). The green interface (address of .254) has a DHCP server that is pushing addresses from .1 to .100 and the purple interface (.253) is pushing addresses from .101 to .120. Every machine here is trusted, and as such is connected to the green interface via a wired connection or wireless APs. Nothing is connected at all (port is physically empty, traffic graphs show no activity) to the purple interface. However, every machine here is pulling addresses from the purple interface. So the question boils down to, how do I remove/stop my machines from pulling from the purple dhcp interface? Also, shouldn't the purple interface (if we were using it for guest Wifi or something) be on a different subnet (i.e. 192.168.100.0/24 instead of 192.168.1.0/24 with all the trusted machines)?

  Read the article

• Enabling hardware acceleration and Xinerama for multi-monitor/multi-GPU in Linux

  - by mynameiscoffey

  My current setup is three monitors connected as follows (monitors listed from left to right): GPU0 (nVidia GTX 280): - Dell 2405FPW (1920x1200) - Dell U2410 (1920x1200) GPU1 (nVidia 210): - Dell 2405FPW (1920x1200) Works like a charm in Windows 7, not so much in Linux. I seem to only have three real options: Run all three monitors as a seperate X screen, I get hardware acceleration but as they are all independent X sessions I cannot move windows between them and can only have firefox open on one at any given time. Run the two on GPU0 in TwinView mode and have GPU1 as a seperate X screen. Same limitation as 1 but at least two monitors work together ok. I did have an issue where occasionally Linux saw both monitors on GPU0 as a single large monitor however. Enable Xinerama and have everything work as I want it to but hardware acceleration is gone and the display is Windows 95 style choppy. My ideal solution would be to have all screens working as they do under Xinerama without the limitation of having hardware acceleration disabled. I don't even care if that means rendering all three on GPU0 and somehow farming out the display of the third monitor to GPU1, whatever works. My question is this: is there any way to accomplish this? I don't feel like my use case is so out there that there shouldn't be at least some form of support (beyond the three limited options presented above), or is my best option going to be to just suck it up and pick up a better card to replace both that can handle three outputs by itself?

  Read the article

• KVM Guest not reachable from host

  - by Paul

  Hello, I'm running Ubuntu server 9.10, installed KVM etc. Created the bridge network following instructions on help.ubuntu.com/community/KVM/Networking Created a windows 2008 guest using virt-install command line (using virt-manager GUI from a remote Ubuntu desktop would not let me select the ISO location). I can however use a remote virt-manager to connect to the guest and complete the windows install. Within windows 2008 I changed the IP address but cannot ping from outside world. The bridge network appears fine - I'm not sure what else to look at! Here is the interfaces file: The loopback network interface auto lo iface lo inet loopback The primary network interface auto eth0 iface eth0 inet manual # auto br0 iface br0 inet static address 60.234.64.50 netmask 255.255.255.248 network 60.234.0.0 broadcast 60.234.0.255 gateway 60.234.64.49 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth1 iface eth1 inet static address 192.168.12.2 netmask 255.255.255.0 broadcast 192.168.12.255 The ip of the windows server is 60.234.64.52 What else should I check? Regards Paul.

  Read the article

• ESXi boot time with 9 iSCSI targets

  - by Myles Gray

  Our ESXi hosts have always been slow booting when it came to iscsi_vmk loaded successfully - sitting here for almost 5 minutes. In all a full server reboot takes almost 12 minutes. We have 9 iSCSI targets per host (5 SANs with redundant interfaces) configured as dynamic discovery targets. Has anyone experienced this? Can it be remedied with static discovery mode? Are there any debug steps we can work through to help diagnose this? (All our targets are accessible at boot so i'm assuming the host isn't stuck retrying to connect to a target)

  Read the article

• Cannot open SQL 2005 database in SQL server Management Studio 2008 R2 on Windows 7

  - by Darryl Lawrence

  I have Windows 7 64bit as my OS + SQL Server 2008 R2 installed. I can connect to SQL Databases (2008), but cannot connect to a SQL 2005 database. I can, however, connect to the 2005 SQL Database on a PC that has Windows XP as the OS and also has SQL Server 2008 R2 installed. So it seems that it works fine on XP but not on Windows 7 (32 or 64bit). is this an Operating System issue? Error message: Cannot connect to OMRSQLV016\PRODSQL002. =================================== A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 Error Number: -1 Severity: 20 State: 0

  Read the article

• NoMachine NX window closes after establishing connection

  - by blackicecube

  I am trying to use nomachine nx server and client. But somehow it doen't work. What happens is the following: Client starts up Client authenticates with Server The NoMachine window appears for 2-4 seconds The NoMachine window exists Somehow a "closeEvent" is sent. Here's what I see in the log file: [Thu Sep 24 11:20:37 2009]: Starting nxcomp with options: 'NX 299 Switch connection to: NX mode: unencrypted options: nx/nx,options=/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/options:1022'. [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor: opened file: [/home/foo/.nx/S-adnws029-1022-7EEF1367361DB2A7F4D9F76B06F4B434/session] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[246] str=[Initializing X protocol compression] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Initializing X protocol compression] [Thu Sep 24 11:20:38 2009]: LoginDialog::ShowConnectionStatus code=[247] str=[Established the display connection] error=[0] [Thu Sep 24 11:20:38 2009]: ProgressDialog::printNxStatus: [Established the display connection] [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: QClipboard: Unknown SelectionClear event received. [Thu Sep 24 11:20:38 2009]: LoginDialog: slotAgentTimer [Thu Sep 24 11:20:38 2009]: LoginDialog: Agent found closing windows... [Thu Sep 24 11:20:38 2009]: LoginDialog: setting automatic reconnection to true. [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: LoginDialog: closeEvent received! [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: NXFileMonitor::readData [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called begin [Thu Sep 24 11:20:38 2009]: LoginDialog: stopAllTimers [Thu Sep 24 11:20:38 2009]: LoginDialog: stopProgressTimer [Thu Sep 24 11:20:38 2009]: Utility::getPreferencesFile: 'nxclient' - '/home/foo/.nx/config/nxclient.cfg' [Thu Sep 24 11:20:38 2009]: Settings::flush [Thu Sep 24 11:20:38 2009]: Called destructor for protocol class [Thu Sep 24 11:20:38 2009]: LoginDialog::destructor called end Anyone with a helpful idea?

  Read the article

• IPTables masquerading with one NIC

  - by Tuinslak

  Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

  Read the article

• What is the simplest, open-source webmail frontend available?

  - by josePhoenix

  I am working on a project to create a few extremely stripped down interfaces for common Web/Internet tasks in order to make computers accessible to my visually impaired grandmother. Currently she uses Mac OS X Mail.app, but I had the idea that I could re-skin a webmail interface running on my own server to make it easier for her to use. The ideal webmail interface to use as a starting point would be without frames or AJAX and written in Python, Perl, or PHP5+, though any setup could work as long as the template and stylesheet files were separate from the application itself. This frontend must also connect to a remote IMAP server, since her email account is with her ISP and not on my server. Can anyone recommend a bare-bones, no-nonsense webmail interface that would work for this?

  Read the article

• Can connect to Samba, but access denied to homes

  - by user893730

  I can connect to the samba server using both IP address and server name, and I can see the home folder name, but can't connect to it smb.cnf [global] workgroup = WORKGROUP server string = Venus wins support = no read only = no browsable = yes create mode = 0777 directory mode = 0777 case sensitive = no dns proxy = no interfaces = 127.0.0.1/8 eth0 bind interfaces only = yes log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 security = user encrypt passwords = true passdb backend = smbpasswd obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = no [homes] comment = User Directories path = /data/localdevs/%u public = no browsable = yes writable = yes the /etc/samba folder has the following files in it lmhosts smb.conf smb.conf.orig smbusers The output of "sudo pdbedit -L" is user1:500: ls -abl /data/localdevs/ drwxr-xr-x. 4 user1 user1 4096 Jul 24 17:35 user1 These are what samba logs are showing when I get the access denied to user1's home directory [2012/07/24 20:27:08.599216, 3] smbd/process.c:1489(process_smb) Transaction 24 of length 90 (0 toread) [2012/07/24 20:27:08.599350, 3] smbd/process.c:1298(switch_message) switch message SMBntcreateX (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.599373, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.599412, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.599485, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.599508, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.599552, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.599581, 3] smbd/dosmode.c:166(unix_mode) unix_mode(.) returning 0766 [2012/07/24 20:27:08.599643, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.599668, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.599707, 4] smbd/open.c:1990(open_file_ntcreate) calling open_file with flags=0x0 flags2=0x0 mode=0766, access_mask = 0x81, open_access_mask = 0x81 [2012/07/24 20:27:08.599806, 3] smbd/open.c:467(open_file) Error opening file . (NT_STATUS_ACCESS_DENIED) (local_flags=0) (flags=0) [2012/07/24 20:27:08.599838, 3] smbd/error.c:80(error_packet_set) error packet at smbd/error.c(160) cmd=162 (SMBntcreateX) NT_STATUS_ACCESS_DENIED [2012/07/24 20:27:08.604075, 3] smbd/process.c:1489(process_smb) Transaction 25 of length 90 (0 toread) [2012/07/24 20:27:08.604193, 3] smbd/process.c:1298(switch_message) switch message SMBntcreateX (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.604216, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.604268, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.604336, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.604395, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.604419, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.604442, 3] smbd/dosmode.c:166(unix_mode) unix_mode(.) returning 0766 [2012/07/24 20:27:08.604532, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.604554, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.604583, 4] smbd/open.c:1990(open_file_ntcreate) calling open_file with flags=0x0 flags2=0x0 mode=0766, access_mask = 0x81, open_access_mask = 0x81 [2012/07/24 20:27:08.604679, 3] smbd/open.c:467(open_file) Error opening file . (NT_STATUS_ACCESS_DENIED) (local_flags=0) (flags=0) [2012/07/24 20:27:08.604705, 3] smbd/error.c:80(error_packet_set) error packet at smbd/error.c(160) cmd=162 (SMBntcreateX) NT_STATUS_ACCESS_DENIED [2012/07/24 20:27:08.606977, 3] smbd/process.c:1489(process_smb) Transaction 26 of length 80 (0 toread) [2012/07/24 20:27:08.607096, 3] smbd/process.c:1298(switch_message) switch message SMBtrans2 (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.607119, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.607139, 3] smbd/trans2.c:5100(call_trans2qfilepathinfo) call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004 [2012/07/24 20:27:08.607162, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.607184, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.607208, 3] smbd/trans2.c:5226(call_trans2qfilepathinfo) call_trans2qfilepathinfo . (fnum = -1) level=1004 call=5 total_data=0 [2012/07/24 20:27:08.608306, 3] smbd/process.c:1489(process_smb) Transaction 27 of length 80 (0 toread) [2012/07/24 20:27:08.608362, 3] smbd/process.c:1298(switch_message) switch message SMBtrans2 (pid 2440) conn 0x7f6758780c00 [2012/07/24 20:27:08.608383, 4] smbd/uid.c:257(change_to_user) change_to_user: Skipping user change - already user [2012/07/24 20:27:08.608403, 3] smbd/trans2.c:5100(call_trans2qfilepathinfo) call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1005 [2012/07/24 20:27:08.608439, 3] smbd/vfs.c:881(check_reduced_name) check_reduced_name [.] [/data/localdevs/user1] [2012/07/24 20:27:08.608461, 3] smbd/vfs.c:1038(check_reduced_name) check_reduced_name: . reduced to /data/localdevs/user1 [2012/07/24 20:27:08.608484, 3] smbd/trans2.c:5226(call_trans2qfilepathinfo) call_trans2qfilepathinfo . (fnum = -1) level=1005 call=5 total_data=0

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >