Search Results

Search found 11364 results on 455 pages for 'port blocking'.

Page 302/455 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• PDAnet on Android IP on PC is not public IP. Where does the NAT take place, PDAnet or Verizon?

  - by lcbrevard

  When using PDAnet on a PC (Win7 ultimate) to USB tether a Motorola Droid on Verizon 3G the IP address of the PC appears to be public - 64.245.171.115 (64-245-171-115.pools.spcsdns.net) - but connections show as coming from another public IP - 97.14.69.212 (212-sub-97.14.69.myvzw.com). Someone is performing Network Address Translation - either PDAnet or within the Verizon 3G network. Can someone tell me who is doing the NAT? Is it PDAnet or is it at Verizon? Is there any possibility of setting up port forwarding, such that connections to the public IP 97.14.69.212 (212-sub-97.14.69.myvzw.com) are forward to the PC? We are testing a network protocol that requires either a true public IP or forwarding a range of ports from the public Internet to the system on which the software runs (actually Linux hosted by VMware Player or Workstation on a PC running Windows).

  Read the article

• approx via inetd is not open to connection for others machines

  - by Cédric Girard

  I have an approx server to speed up Debian apt updates, on my Ubuntu 11.04 desktop PC, it had ran fine in the past, but today le 9999 port is open from localhost, but not for others PC. I have not modified inetd configuration at all. What can I check and try? inetd.conf 9999 stream tcp nowait approx /usr/sbin/approx /usr/sbin/approx approx.com # Here are some examples of remote repository mappings. # See http://www.debian.org/mirror/list for mirror sites. debian http://ftp2.fr.debian.org/debian security http://security.debian.org/debian-security volatile http://volatile.debian.org/debian-volatile # The following are the default parameter values, so there is # no need to uncomment them unless you want a different value. # See approx.conf(5) for details. $cache /espace/Dossiers/approx $max_rate unlimited $max_redirects 5 $user approx $group approx $syslog daemon $pdiffs true $offline false $max_wait 10 $verbose false $debug false I tried to allow others PC to connect with a "ALL: ALL" in hosts.allow. ufw is disabled, iptables-save is empty.

  Read the article

• Testing php mail() in localhost problem

  - by Samir Ghobril

  Hey guys, recently I just installed msmtp in linux and I even send a mail from the terminal and it worked: echo -e "Subject: Test Mail\r\n\r\nThis is a test mail" |msmtp --debug --from=default -t [email protected] But in php, after editing the php.ini file to have this: sendmail_path = '/usr/bin/msmtp -t' and using this piece of code: <?php if ( mail ( '[email protected]', 'Test mail from localhost', 'Working Fine.' ) ){ echo 'Mail sent'; } else{ echo 'Error. Please check error log.'; } ?> I get the Mail sent message but don't receive a message in my inbox. Not even in the spam folder. Anything wrong I'm doing? msmtp configuration file: defaults tls on tls_starttls on tls_trust_file /etc/ssl/certs/ca-certificates.crt account default host smtp.gmail.com port 587 auth on user [email protected] password password from [email protected] logfile /var/log/msmtp.log

  Read the article

• How complex of a daemon should be run through inetd?

  - by amphetamachine

  What is the general rule for which daemons should be started up through inetd? Currently, on my server, sshd, apache and sendmail are set up to run all the time, where simple *NIX services are set up to be started by inetd. I'm the only one who uses ssh on my computer, and break-in attempts aren't a problem because I have it running on a non-standard port, and my HTTP server gets maybe 5 hits a day that aren't GoogleBot. My question is, what are the benefits vs. the performance hits associated with running a complex daemon like sshd or apache through superserver, and what, if any successes or failures have you had running your own daemons in this manner?

  Read the article

• AWS RDS Timeout

  - by warder57

  I know next to nothing about networking/servers. So I'm assuming I'm missing something obvious. All of the resources I can find on this, either don't work or are outdated. I created a brand new AWS account on the free plan. I created a postgres RDS DB instance. I made sure that this RDS instance is set to publicly accessible. This RDS instance has the default VPC/Security Group settings. In order to connect to this DB from my local machine, I used pgadmin3 and followed the instructions provided on the AWS documentation page. Seen here: http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_ConnectToPostgreSQLInstance.html I've double checked all of the information required to connect: Host: whatever.whatever.us-west-2.rds.amazonaws.com Port: 5432 Username: USERNAME Password: PASSWORD When I try to connect to the database, my connection fails due to a timeout. (During step 4 in the above guide.) Can anyone point me to whatever I am missing? Thanks in advance

  Read the article

• Netgear WNR1000 WiFi speed

  - by Kamil Klimek

  I have Netgear WNR1000 150N, Macbook Pro 13" with Broadcom BCM43xx 1.0, Network connection 60mbps When I connect through the cable I easily get around 60mbps. When I go through the WiFi it's capable to get only 32mbps at tops. Any ideas why is that? Is that my router limitation or maybe my WiFi card? If it is routers fault what router would you suggest. Best router would be with usb port for external hard drive. Forgot to add screenshot with connection details: Szybkosc transmisji == Transmission speed

  Read the article

• LAN access via USB from Ipod Touch?

  - by Alec

  I need to browse the local web server from my Ipod Touch to test apps we're developing. I'm not allowed to install a separate wireless access point which would be the easiest solution. Can I use the USB cable for this? Also, the local PC is a Dell Mini 9 running Ubuntu. Has anyone managed to use the wireless port to create an ad hoc connection to an Ipod Touch so the Ipod can browse the Ubuntu web server? This would be an alternate option for me. Thank you!

  Read the article

• Is it still "wrong" to require TLS on incoming SMTP messages

  - by jackweirdy

  According to the STARTTLS Spec Section 5: A publicly-referenced SMTP server MUST NOT require use of the STARTTLS extension in order to deliver mail locally. This rule prevents the STARTTLS extension from damaging the interoperability of the Internet's SMTP infrastructure. A publicly-referenced SMTP server is an SMTP server which runs on port 25 of an Internet host listed in the MX record (or A record if an MX record is not present) for the domain name on the right hand side of an Internet mail address. However, this spec was written in 1999, and considering it's 2014, I'd expect most SMTP clients, servers, and relays to have some kind of implementation of STARTTLS. How much email can I expect to lose if I require TLS for incoming messages?

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Conection refused error for telnet and ssh

  - by pnp

  I try to telnet to one of my systems 172.16.xx.z from 172.16.xx.y, but the response i get is- sudo telnet 172.16.xx.z Trying 172.16.xx.z... telnet: Unable to connect to remote host: Connection refused Same for localhost- sudo telnet localhost Trying ::1... Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused And the same experience with ssh: sudo ssh 172.16.xx.z ssh: connect to host 172.16.xx.z port 22: Connection refused Any guesses what could be wrong here? Both my systems run on Ubuntu.

  Read the article

• Lightweight monitoring for a Windows XP laptop

  - by kazanaki

  Hello I have a windows XP laptop in a remote location. I would like to have an overview for CPU/Memory statistics from a remote location. Monitoring a specific service (a Tomcat instance) would be nice but not essential. I have seen the monitoring solutions (Nagios, cacti e.t.c) and they are all very heavy. I do not want to install mysql, web server and other stuff like that on the laptop. I don't even need a web solution at all. It could just be a simple command line app with a server port and on my machine another GUI application would connect there (and not a web browser) Is there something like this available?

  Read the article

• hung up troubleshooting packet discards

  - by Chris Satola

  I realize my question is generic, but hopefully someone may have some guidance for me. My network consists of Cisco switches. I am seeing a significant amount (upwards of millions of packets per day) transmit drops between two switches. One being a 3750 and the other a 3560. The peak throughput of this link is only upper 400Mbps, so it shouldn't be a bandwidth issue. At this point, I am sort of clueless where to look or what tools I can use to determine what packets are dropping and why. I can setup a SPAN port on that link and wireshark it, but I don't know if that could tell me anything. Does anyone have any suggestions? Thanks in advance.

  Read the article

• How to stop syslog from listening to 514 on CentOS 5.8

  - by Jim

  I have a CentOS 5.8 machine (with regular syslog) that for some reason is listening to port 514, even though it is not started with "-r" (to receive remote syslog messages). # netstat -tulpn | grep 514 udp 0 0 0.0.0.0:514 0.0.0.0:* 2698/syslogd Syslog is started with only "-m 0": ps -ef | grep syslogd root 2698 1 0 15:55 ? 00:00:00 syslogd -m 0 I have tried starting it with "-m 0 -r", just to check if there was any difference, but there is not. This machine is a client and should only log to a central log server - it should not be listening itself. What am I missing?

  Read the article

• Apache configuration to accept all data

  - by ServerDown

  Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

  Read the article

• Where can I find logs for SFTP?

  - by Jake

  I'm trying to set up sftp-server but the client is getting an error, Connection closed by server with exitcode 1 /var/log/auth.log (below) doesn't help much, how can I find out what the error is? I'm running Ubuntu 10.04.1 LTS sshd[27236]: Accepted password for theuser from (my ip) port 13547 ssh2 sshd[27236]: pam_unix(sshd:session): session opened for user theuser by (uid=0) sshd[27300]: subsystem request for sftp sshd[27236]: pam_unix(sshd:session): session closed for user theuser Update: I've been prodding this for a while now, I've got the sftp command on another server giving me a more useful error. Request for subsystem 'sftp' failed on channel 0 Couldn't read packet: Connection reset by peer Everything I've found on the net suggests this id a problem with sftp-server but when I remove the chroot from sshd config I can access the system. I assume this means sftp-server is accessible and set up correctly.

  Read the article

• Issues with FTP on my server

  - by homestead

  I installed FTP on my windows 2003 box I created a FTP site on a ipaddress, I am not allowing anonymous access. I created a user that has access to the folder c:\ftptest connecting to my server using filezilla shows: connectiong to -0.0.0.0 connection established, waiting for welcome message could not connect to server I tried both active and passive modes. The port on the server is open i.e. TCP 21 I can connect to other FTP sites so my locla firewall isnt' the issue. (now I know why sys admin work is so fun!)

  Read the article

• How Do I Change the Windows7 LAN Proxy Config from the Command Line

  - by david.barkhuizen

  In Windows7, Is it possible to define/change the proxy config from the command line ? So, using the gui, I would go: Start Control Panel Network and Internet Internet Options Connections LAN Settings and then - enable/disable the proxy - define IP:port of proxy server But I would like to rather do this from the command line (so that I can run the command from a batch-file with a shortcut key - enabling me to switch proxy configs using a short-cut, rather than having to wade through the MS wizard). I've looked at using netsh.exe to change the settings for WinHTTP, but this seems to be thr wrong thing to do, as the WinHTTP setting do not appear to be related to the LAN settings. Much appreciated folks.

  Read the article

• RGB to DVI adapter not working for Projector-to-PC

  - by user897052

  We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

  Read the article

• Windows Phone 8 not interfacing with Zune software

  - by Cyberherbalist

  I just got a Lumia 521 with Windows Phone 8 and am trying to get the device to work with the Zune software on my PC. I still have my Windows Phone 7 device, and the new one is not working the same way. When I plug the WP7 device into the PC's USB port, it automatically fires up Zune and I can sync my podcasts and music etc to the device. But when I plug the Lumia into the PC it doesn't fire up Zune, and if I start Zune manually, it doesn't interface with the phone at all. Perhaps I am missing something and WP8 isn't supposed to use Zune to interface with the phone?

  Read the article

• Why shibboleth IdP idp-metadata.xml recommends 8443 for SOAP?

  - by toma

  After the install.sh of 2.4.0 Shibboleth Identity Server, the idp-metadata.xml file is created. Why is that? Is not enough secure to use the standard HTTPS/443 port? <ArtifactResolutionService Binding="urn:oasis:names:tc:SAML:1.0:bindings:SOAP-binding" Location="https://idp.example.com:8443/idp/profile/SAML1/SOAP/ArtifactResolution" index="1"/> <ArtifactResolutionService Binding="urn:oasis:names:tc:SAML:2.0:bindings:SOAP" Location="https://idp.example.com:8443/idp/profile/SAML2/SOAP/ArtifactResolution" index="2"/> <SingleLogoutService Binding="urn:oasis:names:tc:SAML:2.0:bindings:SOAP" Location="https://idp.example.com:8443/idp/profile/SAML2/SOAP/SLO" /> <AttributeService Binding="urn:oasis:names:tc:SAML:1.0:bindings:SOAP-binding" Location="https://idp.example.com:8443/idp/profile/SAML1/SOAP/AttributeQuery"/> <AttributeService Binding="urn:oasis:names:tc:SAML:2.0:bindings:SOAP" Location="https://idp.example.com:8443/idp/profile/SAML2/SOAP/AttributeQuery"/> Thanks, Tamas

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• Remote Desktop over SSH SOCKS proxy to bypass firewall

  - by scrumpyjack

  Hi folks, I'm trying to connect to a Windows server from my Mac using RDC2.1 for Mac. The problem is the server I need to connect to is guarded by the evil dragon - IP-based access control on a completely separate network. I have an IP I can get in on, but it's at my office (i.e. a completely separate network). Because that network isn't set up for VPN, I've set up a SOCKS proxy through an SSH tunnel (which is all working fine). (SSH proxy) Me (on my Mac) ----------> Office Linux box ----> Windows server (home network) (office network) (other network) From my Linux server in my office (the SSH server) I can telnet to port 3389 on the Windows server, no problem. But from my Mac I can't get so much as a squeak out of it. Any ideas?

  Read the article

• Squid: problem with FTP service (Windows Server)

  - by Diego

  I followed the instructions on this question and everythig works fine. I have an DHCP server that assigns "IP client" without gateway. Internet with IE or Firefox Browser works but FTP service doesn't work. In squid.conf I have put a line: acl Safe_ports port 80 21 443 389 5307 8080 3144 8282 88 8443 20443 11438 1443 8050 30021 10443 4747 4774 1384 Have I to put gateway in DHCP Server? Have you any suggestion for me? Thanks for your help!

  Read the article

• Setting up thttpd to run vqadmin or qmailadmin...keep getting 404s

  - by Ian

  I run nginx for my web server but wanted to quickly toss up thttpd so I could do some maintainenace using either vqadmin or qmailadmin. Those files are located at: /usr/local/apache/cgi-bin/qmailadmin and /usr/local/apache/cgi-bin/vqadmin/vqadmin.cgi. My /etc/thttpd.conf is: host=127.0.0.1 port=8000 user=apache logfile=/var/log/thttpd.log pidfile=/var/run/thttpd.pid dir=/usr/local/apache/cgi-bin nochroot cgipat=**.cgi When I use lynx to go to http://127.0.0.1:8000/cgi-bin/vqadmin/vqadmin.cgi, thttpd tosses a 404. Any idea how to get this working? Many thanks.

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >