Search Results

Search found 12754 results on 511 pages for 'cached mode'.

Page 303/511 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

  • ubuntu server in a vm, can't connect to internet

    - by jessh
    I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

    Read the article

  • How to switch a Sound Ouput Device before the Mac goes to sleep?

    - by Konzepz
    I've connected my MacBook to a set of external speakers with a USB. Now, every time the computer goes to Sleep Mode, there's an awful static sound coming from the speakers. I guess this is some bad wiring; but that's what I've got. However, I can use an idea for a script (AppleScript, bash, whatever) that will switch off the USB output sound in (System Preferences) before the computer goes to sleep, and will switch it back on (if exists) on Wake. Any ideas? Thanks!

    Read the article

  • Why are my hardware tabs disabled for my VMWare player image?

    - by djangofan
    I just installed a Ubuntu 10.10 image on VMWare player and after I finished installing I was messing with the hardware settings and I did the following: 1. disabled the floppy device 2. changed the CDRom to "use system cdrom" 3. tried to enable the VMWare tools but it complained that the vm was in "Easy Install" mode After I fiddled with the VM now my floppy and 2 CD rom devices as well as sound card and USB settings are all disabled in the VM hardware settings. Any idea on why this occurred and how to fix it?

    Read the article

  • Creating a portable PHP install?

    - by Xeoncross
    I would like to create a folder with a couple versions of PHP that I can start in cgi mode as needed. I use different windows machines for development and I would like to be able to move around computers without needing to install PHP on each one. Something like below F:/PHP /5.3.2 /5.2.8 /5.1.0 Then I could just start each up as needed with something like F:\php\5.3.2\php-cgi.exe -b 127.0.0.1:9000 Which would allow nginx or apache to use the PHP service. This would really help to make my development environment decoupled. Does anyone know how to create a portable PHP install?

    Read the article

  • Can't see progress of rolling back SPID with KILL WITH STATUSONLY

    - by BradC
    I have a SPID on SQL 2005 that shows in Activity Monitor as "ROLLBACK" mode (because a transaction log filled up, not because it was manually killed). I tried to see how much time it has left to roll back with a KILL 115 WITH STATUSONLY but it just said "Status report cannot be obtained. Rollback operation for Process ID 115 is not in progress." Can I safely issue a "KILL 115" so that I can see the rollback status? Does this actually do anything on a spid currently in rollback?

    Read the article

  • Windows Server 2008 is stuck at "configuring updates - stage 3 of 3 - 0% complete"

    - by Chris
    This has happened the last two times I've done updates to this system, and I really have no idea what is going on. It is installing a only a month's worth of updates. It only responds to ping and no services are up, so I can't view the system remotely (I have to hook up a monitor to see this message). In the past I've just restarted the system at this point and it eventually finishes updating. I want to know what I can do to avoid this situation, how to diagnose what is going on, and how to get any kind of remote access during the updates. Edit: I can start the machine in safe mode (where I did nothing but backup some files). I restarted and it no longer tries to do a windows update, just goes to the desktop where everything seems extremely broken. I can click on some things, but not launch most programs. I guess all I can do at this point is do a system restore or something.

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Cisco RV016 dual WAN and VPN setup

    - by sklr
    I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

    Read the article

  • Multiple connections to the same Wireless Network in Windows 7

    - by Jamek
    Hello, my university just limited bandwidth to 512 kbps (that's 64 kB/s!) for each connection. I was thinking to make multiple connection to the same wireless network (called "internet"), is this possible under Windows 7? I know it's possible to connect to more than one WLAN through the "hostednetwork" concept in netsh: netsh wlan set hostednetwork mode=allow ssid=xxxxx netsh wlan start hostednetwork However this method doesn't seem to work, I don't know if it's due to the authentication method (through certificates while hostednetwork seems to support just a "passphrase") or because I'm already connected to that network with the same MAC. Can you think to some tool able to do this?

    Read the article

  • Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

    - by Javier
    I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

    Read the article

  • Apollo linux boot into single user

    - by Spirit
    We have a device that runs Appolo Linux and I have to boot that device into a single user mode so that i can run a fsck to check the hard drive for errors. I've been goggling this during the past hour and so far I haven't found any specific method on how can I do that on this version on Linux. The device is known formerly as a NFX Cinxi One - now re-branded into BlackStratus LOG Storm. If any of you have any experience with this one you may know it is a device that is used to collect logs from other servers. I know that the above info isn't much but that is everything that I can provide up until now since tomorrow I have to follow up closely on this problem.

    Read the article

  • Windows Explorer not responding

    - by William Barnes
    I am running W7 64bit on an AMD Quad 1.8Ghz processor. I have a 500GB system drive and added a 1TB drive. Windows Explorer does it's "not responding" thing regularly. I read the other posts and ran SCANNOW and it came back clean. I also ran AUTORUNS and disabled everything that was not windows related. No luck. I booted in safe mode and it appears that explorer works, but I don't know why. I did read a post awhile back that it could be a Service program that makes explorer not respond. I forgot to bookmark the site and don't remember how to turn off the SP's without crashing the entire system. Any help or suggestions will be appreciated. I have also run CHKDSK on all drives, and there were no errors found. EDIT: It has been in for about 2 years and the problem started about 4 or 5 months ago.

    Read the article

  • Samba domain trust errors on a specific interface

    - by John K
    We have a windows domain that also has RHEL member servers in it. All the servers have a primary network connection to the LAN, but some servers also have private dedicated links to one of our RHEL servers, which serves as a head to our SAN storage. This particular server is running Samba 3.5.15, and is running in domain authentication mode. Users can access shares on this server without a problem over the LAN connection from our Windows servers, but if a user tries to access the shares over a private link (i.e. a 192.168.1.2 address to the RHEL server) users get an error "The trust relationship between this workstation and the primary domain failed."

    Read the article

  • How to know my wireless card has injection enabled?

    - by shrimpy
    I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

    Read the article

  • Block ip for long time

    - by Tiziano Dan
    This question is about a iptables, I wanna to know how can I block these ip for 1hour and not only a little time.. because they make to many sql requests, I'm using it for block but it's not enough because there's anyway 100k ip who attack then too much requests for sql server. iptables -N SYN-LIMIT iptables -A SYN-LIMIT -m hashlimit --hashlimit 8/second --hashlimit-mode srcip --hashlimit-name SYN-LIMIT -j RETURN iptables -A SYN-LIMIT -j DROP iptables -I INPUT -p tcp --dport 80 --syn -j SYN-LIMIT iptables -I INPUT -p tcp --dport 80 -m connlimit --connlimit-above 6 -j REJECT --reject-with tcp-reset How can I make the same but block IP for long time ? (Not manually !)

    Read the article

  • Odd FTP ASCII/BINARY transfer behavior after migrating to a new server

    - by Incognita Mundi
    I recently got a dedicated server and after migration to the new machine I started noticing problems with file transfers. My FTP client, despite being set to auto, keeps uploading php files in binary mode and the content of those files is messed up. Since I mostly upload files of different kinds it would be annoying to change from binary to ASCII every single time, beside, I never had such problems. What could be the cause of this behavior? My dedicated server runs CENTOS 6.4 and the ftp server is Pure-FTPd. I tried different FTP clients and they all have the same problem so I assume is soem misconfiguration on the server side. Thanks

    Read the article

  • How to set default permissions for automounted FAT drives in Ubuntu 9.10?

    - by piman
    I've got many FAT32 drives that I'd like to mount in Ubuntu such that they have permission mode 700 for directories and 600 for all other files. By default, they have 755 for all files, which is not particularly useful since almost no non-directories should be executable, and it screws up version control repos hosted on the drives. "Back in the day" I would have had the drives listed in /etc/fstab with the umask/dmask I want and there was no such thing as a default. These days, drives automount under their volume names. Which is great, except now I have no idea how to set the default. I have tried changing the /system/storage/default_options/vfat/mount_options gconf key with no apparently effect. It was 077 initially but the mounted drive reflected a default of 022; changing it and re-inserting the drives resulted in the files still having permission bits of 755.

    Read the article

  • Raid system fails to boot after moving from 2.6 kernel to 3.5

    - by user846226
    I'm running Gentoo Linux with a custom compiled kernel and I've just migrated from a 2.6 kernel to a 3.5. As my HD's are on RAID 0 mode I use a custom initrd file in order to be able to boot. While kernel 2.6 is able to boot without problems the new 3.5 compiled kernel fails to boot complaining about no block devices found. After taking a look at initrd.cpio contained scripts I can see the failure message is given by mdadm tool. Does anyone has a clue about that? Edit: this morning i noticed there was some kind of issue on my old initrd which works fine for 2.6 kernels, so created a new initrd which works fine and let me to boot into GNU/Gentoo Linux with same 3.5 bzImage. It could be an issue of mdadm, gonna check it. https://bugs.gentoo.org/show_bug.cgi?id=416081

    Read the article

  • HP Wireless Printer not working

    - by Omri Spector
    I have installed an HP DeskJet 4620 driver on a win 7 machine. All works perfectly for several days, and than printing is not longer possible. Instead I get the message: "Unable to communicate with printer". This happened on every Win 7 PC I tried, and none of the HP/MS sites contain any relevant info... (Posting this so that the answer appears online, as I did solve it after much work) Solution: It appears that HP installation puts a unique "port" called "HP Network re-discovery". It stops working after some time (possibly after the first time the printer/pc enter sleep mode). BUT, the standard MS TCP port works just fine. So: Go to "Printers" Right click Printer Click "Printer properties" and then "Printer" or "Fax" (for both - do all this twice) Click "Add Port..." Select "Standard TCP Port" Fill in details Move printer to use the new port by un-checking the old one and checking the new one Happy printing.

    Read the article

  • Is it possible to kill a RAS connection which won't disconnect.

    - by sgmoore
    I have a Windows 2003 Server which has a number or RAS Connections to some of our customers. Occasionally the connections go into a mode where there are connected, but not working. Disconnecting and reconnecting solves the problem. However sometimes you can not disconnect as I get the following error message It is not possible to disconnect at this time. The connection is currently busy with a connect or disconnect operation. There are no visible connection dialog boxes when this message occurs and I usually end up having to restart the server which obviously affects all the other users. I know that if you have a service that is stuck 'stopping' you can just kill it. Is there anything similar that you can do to reset a ras connection?

    Read the article

  • Installing then Running VMware or VirtualBox causes my Windows 7 PC to not boot up after shutting down?

    - by Rick
    At my work I am provided with a Windows 7 PC but I am a programmer and Windows gives me problems for doing some types of development so I want to have a virtual Ubuntu Linux machine that I can use for some things. However, I have tried with both VirtualBox and VMware and I am able to install the latest Ubuntu and run it but then when I try to restart / start the computer after it was shut down, I am unable to boot into Windows normally and end up having to go into Safe mode and then use the system restore to get my system back up and working. I am puzzled by this and would appreciate if anyone has any idea why it would be doing this, I have searched on this but can't find anything. Thanks for any advice

    Read the article

  • Establish direct cable connection between Windows 8 PCs in home network

    - by Marie. P.
    I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

    Read the article

  • Can GNU sed (for Windows) handle Unicode? If so, is it a code-page/locale issue, or a switch?

    - by Peter.O
    I've been using GNU SED on and off for a couple of years now. It spins me out a bit sometimes, but it does a good job... for single-byte char sets! I now and then notice references to GNU SED being Unicode-aware, but the closest I've seen of this is its "binary" mode.. and binary is not Unicode. Can GSED process a Unicode text file at CodePoint resolution, including and especially \r\n (Windows)... and if it can, does it expect UTF-8, UTF-16, or what? and how does SED detect the encoding?

    Read the article

  • Xen DomU does not have network connectivity

    - by Prakashkumar Thiagarajan
    I am trying to install Xen on my Fedora box. Dom0 image has network connectivity. But when I try to create a DomU, it does not have network connectivity. I want to be able to run in bridged mode. I have the /etc/xend/xend-config.sxp file accordingly. My config file looks like kernel = "/boot/vmlinuz-2.6.18-xenU" memory = 64 name = "clientA" vif = ['bridge=xenbr0,mac=12.34.56.78.9A.BC'] root = "/dev/sda1 ro" ramdisk = "/boot/initrd-linux.img" extra = "ro selinux=0.3 initcall_debug" features = 'auto_translated_physmap' Am I missing something ?

    Read the article

  • How do you know where macports installs python packages to?

    - by xmaslist
    I am running macports to install scipy and such on OS X leopard with python 2.7. The install runs successfully, but running python and trying to import the packages I've installed, they're not found. What I'm running is: sudo python_select python27 sudo port install py27-wxpython py27-numpy py27-matplotlib sudo port install py27-scipy py27-ipython Opening up python in interactive mode (it is the correct version of python), I type 'import scipy' and get a module not found error. What gives? How can I find out where it is installing the packages to instead?

    Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >