Search Results

Search found 11826 results on 474 pages for 'parallel port'.

Page 303/474 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

  • Running dnsmasq as an authoritative DNS server

    - by Lord Loh.
    I am trying to implement a dynamic dns service for my computers. I have pointed h.lohray.com to my EC2 instance in the NS record of lohray.com and have installed dnsmasq on that system and have made sure to unblock the firewall port. For now, I have statistically added an entry on my /etc/hosts file. 129.118.19.163 i7.h.lohray.com however, i7.h.lohray.com does not resolve correctly with nslookup or dig :-( This is the only time I could have this resolved (online nslookup) - 50.19.103.190 is the IP address of the EC2 instance where dnsmasq is running. Where could I have gone wrong?

    Read the article

  • Sonicwall - dual WAN ports - switch from one to another

    - by Charles
    Hi, Folks! I'm using a SonicWall NSA 240 which has two WAN ports (T1 and Comcast) and the LAN port has a cable which connects to a switch. From the switch, several cables connect to other switches. The SonicWall doesn't have DHCP enabled; one of our domain controllers running Windows Server 2003 also functions as a DHCP server. Is there a way for a user in our network to change connection from T1 to Comcast as their ISP or vice versa? In other words, if a user is connected via the T1, can he/she somehow connect via Comcast instead? Thanks, in advance, for your help! Sincerely, Charles

    Read the article

  • USB drivers installed twice

    - by stupid-phil
    Hello, I have a problem with usb drivers on Windows 7 64bit When I start up my laptop, the mouse I have plugged into a usb port does not work. I have to open the device manager, where there are two "Standard Enhanced PCI to USB Host Controller" entries. One is marked as faulty (yellow triangle). I uninstall this. Scan for changes. Then it re-appears, but not marked as faulty. And the mouse works. I have to do this every time I reboot. A colleague has the same problem. Both DELL laptops, but different models. I've tried uninstalling all USB controllers, but after a reboot, they are all reinstalled with the faulty entry. This only started happening in the last few weeks. Any help appreciated. It's driving me nuts. Thanks Phil

    Read the article

  • How do I keep second monitor (HDTV) from auto-disabling in XP when it is turned off?

    - by ThantiK
    I have a new 32" TV that I hooked up to the HDMI port on the back of my video card to use as a second monitor. I used an HDMI/DVI cable to hook it to the TV, and whenever I turn my TV off, XP disables the device tied to the TV so each time I want to use the TV as the monitor, I have to go into my display properties and enable it; it gets pretty annoying. How do I turn this 'feature' off? -- I have an NVidia card should it be specific to the nvidia control panel.

    Read the article

  • CentOS PAM+LDAP login and host attribute

    - by pianisteg
    My system is CentOS 6.3, openldap is configured well, PAM authorization works fine. But after turning pam_check_host_attr to yes, all LDAP-auths fail with message "Access denied for this host". hostname on the server returns correct value, the same value is listed in user's profile. "pam_check_host_attr no" works fine and allows everyone with correct uid/password a piece of /var/log/secure: Sep 26 05:33:01 ldap sshd[1588]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=my-host user=my-username Sep 26 05:33:01 ldap sshd[1588]: Failed password for my-username from 77.AA.BB.CC port 58528 ssh2 Sep 26 05:33:01 ldap sshd[1589]: fatal: Access denied for user my-username by PAM account configuration Another two servers (CentOS 5.7 Debian) authorizes on this LDAP server correctly. Even with pam_check_host_attr yes! I didn't edit /etc/security/access.conf, it is empty, only default comments. I don't know what to do! How to fix this?

    Read the article

  • chroot'ing SSH home directories, shell problem.

    - by Hamza
    Hi folks, I am trying to chroot my SSH users to their home directories and it seems to work.. in a strange way. Here is what I have in my sshd_config: Match group restricthome ChrootDirectory %h The permissions on the user directories looks like this: drwxr-xr-x 2 root root 1024 May 11 13:45 [user]/ And I can see that the user logs in successfully: May 11 13:49:23 box sshd[5695]: Accepted password for [user] from x.x.x.x port 2358 ssh2 (with no error messages after this) But after entering the password the PuTTY window closes down. This is a wild guess, but could it be because the user's shell is set to /bin/bash and it can't execute because of the chroot? If so, could you give me pointers on how to fix it? Would simply copying the bash binary into user's home directory and modyfying the shell work? How would I deal with the dependencies, ldd shows quite a few of those :) Comments/suggestions will be appreciated. Thanks.

    Read the article

  • How to use Client for NFS on Windows Vista?

    - by netvope
    I've installed "Client for NFS" on my 32-bit Windows Vista Ultimate. However, I can't find it in the start menu, and can't find any documentation on how to use it. How do I connect to a NFS share using "Client for NFS"? Can I map it to a drive letter? How do I choose connection options, such as my uid/gid, mount as read-only, port number, etc? Ideally I would like to map a NFS share using the command line. You may also suggest alternatives to "Client for NFS".

    Read the article

  • Prevent IIS7 HTTPS from binding to all SSL IP addresses

    - by robpaveza
    I've had this interesting problem with IIS7. I have a number of HTTPS sites in IIS7. That hasn't been a problem, until I wanted to go and set up VisualSVN Server using an SSL certificate. The installer had trouble starting the service. When I looked in the event log, the error was that "the file is already in use by another process." I figured that the "file" was really a socket, and checked with netstat - even though IIS was only bound to three specific IP addresses (.160, .156, and .168) with port 443, it was consuming *:443. I could stop the World Wide Web Publishing Service, start VisualSVN, and then start IIS, but then none of my SSL servers would start. Any helpful hints about how I could make IIS not try to default-bind to *:443? Thanks!!

    Read the article

  • Xerox Workcentre 3119 and Linux

    - by Milan Babuškov
    I'm trying to get Xerox Workcentre 3119 printer to work on Linux. It's a multifunction device (printer and scanner). I run the CUPS web interface at: http://localhost:631/ and it recognizes it on USB port and even suggests Gutenprint driver from the list. When I try to print a test page, the printer goes through "warming up" process (i.e. lights blink and sound is heard) but does not print anything. There are no errors in /var/log/cups/error_log and access_log shows as if everything is ok. The printer works fine in Windows XP. Does anyone have any experience with this printer on Linux?

    Read the article

  • Strange failure audit in 2003 R2 X64 SP2

    - by Az
    our server is running 2003 R2 X64 SP2, we keep seeing this in clusters of around 4 rapid fire. Sometimes 2 hours, sometimes around 8 hours apart with slight variations. I am also seeing the same blank username and domain in an account locked out message, I have tried disabling all scheduled tasks, if anyone has any idea please let me know! I find these processes running out of svc host: AeLookupSvc, AppMgmt, BITS, Browser, CryptSvc, dmserver, EventSystem, helpsvc, IAS, lanmanserver, lanmanworkstation, Netman, Nla, RasMan, Schedule, seclogon, SENS, SharedAccess, ShellHWDetection, winmgmt, wuauserv, WZCSVC Logon Failure: Reason: Account currently disabled User Name: Domain: Logon Type: 3 Logon Process: Authz Authentication Package: Kerberos Workstation Name: PPCLUBES_TS Caller User Name: PPCLUBES_TS$ Caller Domain: PPCLUBES Caller Logon ID: (0x0,0x3E7) Caller Process ID: 928 Transited Services: - Source Network Address: - Source Port: -

    Read the article

  • Using ADSL Modem/WiFi Router to share existing network wirelessly

    - by joshhunt
    At my uni we have a wired Ethernet connection in our dorms. However, I want to share this connection with my macbook using wifi (so I don't have to be constantly tethered). I am looking at using my DSL G064T ADSL modem/WiFi router as a wifi repeater for the uni network. Is this possible? How would I go about doing this? I understand that it would be possible using a normal Wifi router (seeing as it has an ethernet 'in' port where it would get the external connection from.), so is it just not possible using the router I have? If i need to buy another one, which one would you recommend?

    Read the article

  • Openfire: Closing session due to incorrect hostname

    - by cvista
    I have a fresh install on a windows sevrer 2008 box. I can connect adium to the server from a remote machine and from the admin console/sessions I can see my session. My friend can aslo connect and I can see his session. I can send an admin message out and both of us can see it in the adium clients. We can't see each other though. I also get these logs in the warn window in the log viewer: Closing session due to incorrect hostname in stream header. Host: prjatk.com. Connection: org.jivesoftware.openfire.net.SocketConnection@1b1fd9c socket: Socket[addr=/109.109.248.82,port=56258,localport=5269] session: null prjatk.com is the server - however in the server settings on the admin screen I see the computer name as the hostname - is that the issue? If so how can I change that?

    Read the article

  • tcp flags in iptables: What's the difference between RST SYN and RST and SYN RST ? When to use ALL?

    - by Kris
    I'm working on a firewall for a virtual dedicated server and one of the things I'm looking into is port scanners. TCP flags are used for protection. I have 2 questions. The rule: -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP First argument says check packets with flag SYN Second argument says make sure the flags ACK,FIN,RST SYN are set And when that's the case (there's a match), drop the tcp packet First question: I understand the meaning of RST and RST/ACK but in the second argument RST SYN is being used. What's the difference between RST SYN and RST and SYN RST ? Is there a "SYN RST" flag in a 3 way handshake ? Second question is about the difference between -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP and -p tcp --tcp-flags ALL SYN,ACK,FIN,RST SYN -j DROP When should ALL be used ? When I use ALL, does that mean if the tcp packet with the syn flag doesn't have the ACK "and" the FIN "and" the RST SYN flags set, there will be no match ?

    Read the article

  • Wall jacks to patch panel?

    - by rj454me
    OK, I'm by no means a seasoned networking pro and I had no say so in the design of our current server room which is in dire need of an extreme makeover. Basically, in our server room we have 12 wall plates with 4 RJ-45 ports on each - 48 total RJ-45 ports. From these 48 ports is a spaghetti bowl of network cables feeding our servers located in a rack - there is no patch panel currently, just straight from the wall jack to each server. What I was wondering is, is it feasible to mount a 48 port patch panel in our server rack and feed into this patch panel from the wall jacks (of course nicely routing this cable through some new cable trays)? We really don't have the funds to mount the patch panel and have it fed directly from the switches in the telcom closet which is several hundred feet away. Current: Switch (Telcom Closet) - Wall Jacks - Servers Proposed: Switch (Telcom Closet) - Wall Jacks - Patch Panel - Servers

    Read the article

  • router w/ WOL out-of-the-box, or is known to work with open firmware

    - by Jaroslav Záruba
    I'm looking for a new WiFi router, and one key feature for me is WOL. Seems like many routers won't do this w/ factory firmware. Given my last router (Asus WL-520g) turned into a disco-brick couple hours after flashed to dd-wrt I'd prefer if the new one supported WOL out-of-the-box. other required features would be: dyndns service support port forwarding sometimes it is called "virtual server" I guess NAT loopback so I can access services running in my own network using dyndns hostname or public IP w/o getting too old (for example DIR-615 with factory firmware lets you wait literally minutes) did I mention WiFi? preferably w/ some range extending technology, if such stuff works at all

    Read the article

  • Unknown protocol when trying to connect to remote host with stunnel

    - by RaYell
    I'm trying to set up a stunnel for WebDav on Windows. I want to connect 80 port on my local interface to 443 on another machine in my network. I can ping the machine remote machine. However when I use the tunnel, I'm getting this error all the time SSL state (accept): before/accept initialization SSL_accept: 140760FC: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol There is nothing in the logs on the other machine and here's my stunnel connection config [https] accept = 127.0.0.2:80 connect = 10.0.0.60:443 verify = 0 I've set it up to accept all certificates so this shouldn't be a problem with a self-signed certificate remote host uses. Does anyone knows what might be the problem that this connection cannot be eastablished?

    Read the article

  • PostgreSQL won't start anymore

    - by Sander Declerck
    Today, my PostgreSQL doesn't start anymore on my windows machine... I've tried to start the service in windows services and got the following error: Windows could not start the PostgreSQL Database Server 8.3 service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion. Then I went to the command line to manually start C:/Program Files (x86)/PostgreSQL/8.3/bin/psql.exe, and then I got this error: psql: Could not connect to server: Connection refused (0x0000274D/10061) Is the server running on host "???" and accepting TCP/IP connections on port 5432? Edit: I found this in the logs: 2011-04-22 13:13:16 CEST LOG: could not receive data from client: No connection could be made because the target machine actively refused it. 2011-04-22 13:13:16 CEST LOG: unexpected EOF on client connection

    Read the article

  • unable to run OpenOffice from text mode

    - by dilip
    I have installed OpenOffice in Redhat5 in text mode. When I tried to start OpenOffice using the command: sudo /usr/lib/openoffice/program/soffice "-accept=socket,host=localhost,port=8100; urp;StarOffice.ServiceManager " -nologo -headless -nofirststartwizard: " It shows the error saying javaldx: Could not find a Java Runtime Environment! So I installed jre in my system, and then I did not get any error but OpenOffice does not start. Also I checked the process regarding OpenOffice, but I haven's seen any process related to that. Can any one help me to fix this issue?

    Read the article

  • Sharing a printer over the net from Windows 7 to Windows Server 2003

    - by Grant Unwin
    Hi, I need to share a printer that is connected to a Windows 7 computer. The windows 7 computer is in another building about an hours drive away. The computer that needs to access the printer is running Windows Server 2008. Ive tried setting the printer as 'shared' for 'everyone' on the Windows 7 PC and accessing it from the server by adding a TCP/IP port to the IP address but the printer just wont add. From googling aparently it may need setting up as a printer server through IIS, but i'm just not sure on the best practice. Any help greatly appreciated. Thanks Grant Unwin

    Read the article

  • How to Configure IIS 7.5 to Host Several Classic ASP Sites using 1 IP Address?

    - by SidC
    We are running Windows Server 2008 R2 with IIS 7.5 and have 4-5 Classic ASP sites to install. The main site is stored in wwwroot and the other sites are stored in folders below wwwroot. We have 1 IP address for the server. How do I configure IIS to allow folks to browse/test the sites before domain names are pointed to te server? When I setup one of the sites in a subfolder of wwwroot and assign a separate port to it, I receive a message stating: Config Error Cannot add duplicate collection entry of type 'add' with unique key attribute 'value' set to 'index.asp' How do I remedy this error and permit IIS to render the site?

    Read the article

  • Remote host: can tracert, can telnet, can*not* browse: what gives?

    - by MacThePenguin
    One of my customers of the company I work for has made a change to their Internet connection, and now we can't connect to them any more from our LAN. To help me troubleshoot this issue, the network guy on the customer's site has configured their firewall so that a HTTPS connection to their public IP address is open to any IP. I should put https://<customer's IP> in my browser and get a web page. Well, it works from any network I've tried (even from my smartphone), just not from my company's LAN. I thought it may be an issue with our firewall (though I checked its rules and it allows outbound TCP port 443 to anywhere), so I just connected a PC directly to the network connection of our provider, bypassing out firewall completely, and still it didn't work (everything else worked). So I asked for help to our Internet provider's customer service, and they asked me to do a tracert to our customer's IP. The tracert is successful, as the final hop shown in the output is the host I want to reach. So they said there's no problem. :( I also tried telnet <customer's IP> 443 and that works as well: I get a blank page with the cursor blinking (I've tried using another random port and that gives me an error message, as it should). Still, from any browser of any PC in my LAN I can't open that URL. I tried checking the network traffic with Wireshark: I see the packages going through and answers coming back, thought the packets I see passing are far less than they are if I successfully connect to another HTTPS website. See the attached screenshot: I had to blur the IPs, anyway the longer string is my PC's local IP address, the shorter one is the customer's public IP. I don't know what else to try. This is the only IP doing this... Any idea what could I try to find a solution to this issue? Thanks, let me know if you need further details. Edit: when I say "it doesn't work" I mean: the page doesn't open, the browser keeps loading for a long time and eventually shows an error saying that the page cannot be opened. I'm not in my office now so I can't paste the exact message, but it's the usual message you get when the browser reaches its timeout. When I say "it works", I mean the browser loads and shows a webpage (it's the logon page for the customers' firewall admin interface: so there's the firewall brand's logo and there are fields to enter a user id and a password). Update 13/09/2012: tried again to connect to the customer's network through our Internet connection without a firewall. This is what I did: Run a Kubuntu 12.04 live distro on a spare laptop; Updated all the packages I could and installed WireShark; Attached it to my LAN and verified that I couldn't open https://<customer's IP>. Verified that the Wireshark trace for this attempt was the same as the one I've already posted; Verified that I could connect to another customer's host using rdesktop (it worked); Tried to rdesktop to <customer's IP>, here's the output: kubuntu@kubuntu:/etc$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: recv: Connection reset by peer Disconnected the laptop from the LAN; Disconnected the firewall from the Extranet connection, connected the laptop instead. Set its network configuration so that I could access the Internet; Verified that I could connect to other websites in http and https and in RDP to other customers' hosts - it all worked as expected; Verified that I could still traceroute to <customer's IP>: I could; Verified that I still couldn't open https://<customer's IP> (same exact result as before); Checked the WireShark trace for this attempt and noticed a different behaviour: I could see packets going out to the customer's IP, but no replies at all; Tried to run rdesktop again, with a slightly different result: kubuntu@kubuntu:/etc/network$ rdesktop <customer's IP> Autoselected keyboard map en-us ERROR: <customer's IP>: unable to connect Finally gave up, put everything back as it was before, turned off the laptop and lost the WireShark traces I had saved. :( I still remember them very well though. :) Can you get anything out of it? Thank you very much. Update 12/09/2012 n.2: I followed the suggestion by MadHatter in the comments. From inside the firewall, this is what I get: user@ubuntu-mantis:~$ openssl s_client -connect <customer's IP>:443 CONNECTED(00000003) If I now type GET / the output pauses for several seconds and then I get: write:errno=104 I'm going to try the same, but bypassing the firewall, as soon as I can. Thanks. Update 12/09/2012 n.3: So, I think ISA Server is altering the results of my tests... I tried installing Wireshark directly on the firewall and monitoring the packets on the Extranet network card. When the destination is the customer's IP, whatever service I try to connect to (HTTPS, RDP or SAProuter), I can only see outbound packets and no response packets whatsoever from their side. It looks like ISA Server is "faking" the remote server's replies, that's why I get a connection using telnet or the openSSL client. This is the wireshark trace from inside our LAN: But this is the trace on the Extranet network card: This makes a bit more sense... I'll send this info to the customer's tech and see if he can make anything out of it. Thanks to all that took the time to read my question and post suggestions. I'll update this post again.

    Read the article

  • Mac Air Bootcamp Windows 7 Installation and USB3 Hurdles

    - by Casey
    I am trying to load windows 7 on a new Mac Air(OS X 10.9 Mavericks) using Boot camp, a downloaded windows 7 iso file, and USB3 flash drive. No obvious issues with stepping through the initial phases of boot camp and disc partition, but when the system reboots to load windows setup/install from the USB3 flash, it stalls after a few screens and gives a "missing cd/dvd drive" error. I have read similar posts regarding this fail that imply there is possibly a windows 7 compatibility concern with USB3, and that if a USB2 port is available....or if you can change your BIOS to make your USB3 look like USB2...then you can get around this error. Unfortunately I only have USB3 ports on this system, and it appears accessing the PC equivalent "BIOS" on the new Macs is very difficult....and if you screw it up you can ruin the system. Does anyone have any suggestions? I should also mention that there is NOT a CD/DVD drive on the Mac Air....and I can't migrate to Windows8 (for various reasons). Any help is much appreciated!!

    Read the article

  • NMap route determination on Windows 7 x64

    - by user30772
    C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

    Read the article

  • How can I start using MS-SQL Server ( express )

    - by Oscar Reyes
    Hello. I have just installed Microsoft SQL Express from here: http://www.microsoft.com/Sqlserver/2005/en/us/express-down.aspx I need it because an example of some code I have uses it. My question is: How do I start using it? Which port it opens by default. All I have after installing it is this: I'm not asking for a full tutorial on how to admin MSSql, just a hint on what to do next. I have downloaded and tested in the past Oracle XE and test it with SQuirreL SQL client with out problems.

    Read the article

  • Smoothwall Express interface issues

    - by Timbermar
    I have a SmoothWall Express box that is currently configured with a Green and Purple interface. Both interfaces are in the same /24 subnet (which seems odd to me). The green interface (address of .254) has a DHCP server that is pushing addresses from .1 to .100 and the purple interface (.253) is pushing addresses from .101 to .120. Every machine here is trusted, and as such is connected to the green interface via a wired connection or wireless APs. Nothing is connected at all (port is physically empty, traffic graphs show no activity) to the purple interface. However, every machine here is pulling addresses from the purple interface. So the question boils down to, how do I remove/stop my machines from pulling from the purple dhcp interface? Also, shouldn't the purple interface (if we were using it for guest Wifi or something) be on a different subnet (i.e. 192.168.100.0/24 instead of 192.168.1.0/24 with all the trusted machines)?

    Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >